A DNA Bubble-Mediated Gene Regulation System Based on Thrombin-Bound DNA Aptamers

Genetic Engineering of Microorganisms with Electroactive Genes for the Fabrication of Electrochemical Microbial Biosensors

By integrating electroactive genes into engineered sensing microorganisms, information about the object to be measured can be converted into the output of an electrical signal, omitting the process of converting the output of an electrical signal in conventional sensing strategies and simplifying the steps of biosensor development. By utilizing synthetic biology methods, we can not only create novel genetic circuits by using logic gate operations and integrating genes from other biological components, solving biosensing issues in living systems and enhancing sensor performance, but also convert various types of genetic circuits into electrical signals, broadening the application range of biosensors. Here, we describe an example of how to genetically engineer microorganisms with electroactive genes and the fabrication of an electrochemical microbial biosensor.

Using CIVT-SELEX to Select Aptamers as Genetic Parts to Regulate Gene Circuits in a Cell-Free System

The complexity of genetic circuits has not seen a significant increase over the last decades, even with the rapid development of synthetic biology tools. One of the bottlenecks is the limited number of orthogonal transcription factor-operator pairs. Researchers have tried to use aptamer-ligand pairs as genetic parts to regulate transcription. However, most aptamers selected using traditional methods cannot be directly applied in gene circuits for transcriptional regulation. To that end, we report a new method called CIVT-SELEX to select DNA aptamers that can not only bind to macromolecule ligands but also undergo significant conformational changes, thus affecting transcription. The single-stranded DNA library with affinity to our example ligand human thrombin protein is first selected and enriched. Then, these ssDNAs are inserted into a genetic circuit and tested in the in vitro transcription screening to obtain the ones with significant inhibitory effects on downstream gene transcription when thrombins are present. These aptamer-thrombin pairs can inhibit the transcription of downstream genes, demonstrating the feasibility and robustness of their use as genetic parts in both linear DNAs and plasmids. We believe that this method can be applied to select aptamers of any target ligands and vastly expand the genetic part library for transcriptional regulation.

Protocell arrays for simultaneous detection of diverse analytes

Simultaneous detection of multiple analytes from a single sample (multiplexing), particularly when done at the point of need, can guide complex decision-making without increasing the required sample volume or cost per test. Despite recent advances, multiplexed analyte sensing still typically faces the critical limitation of measuring only one type of molecule (e.g., small molecules or nucleic acids) per assay platform. Here, we address this bottleneck with a customizable platform that integrates cell-free expression (CFE) with a polymer-based aqueous two-phase system (ATPS), producing membrane-less protocells containing transcription and translation machinery used for detection. We show that multiple protocells, each performing a distinct sensing reaction, can be arrayed in the same microwell to detect chemically diverse targets from the same sample. Furthermore, these protocell arrays are compatible with human biofluids, maintain function after lyophilization and rehydration, and can produce visually interpretable readouts, illustrating this platform's potential as a minimal-equipment, field-deployable, multi-analyte detection tool.

Effective Use of Linear DNA in Cell-Free Expression Systems

Cell-free expression systems (CFEs) are cutting-edge research tools used in the investigation of biological phenomena and the engineering of novel biotechnologies. While CFEs have many benefits over in vivo protein synthesis, one particularly significant advantage is that CFEs allow for gene expression from both plasmid DNA and linear expression templates (LETs). This is an important and impactful advantage because functional LETs can be efficiently synthesized in vitro in a few hours without transformation and cloning, thus expediting genetic circuit prototyping and allowing expression of toxic genes that would be difficult to clone through standard approaches. However, native nucleases present in the crude bacterial lysate (the basis for the most affordable form of CFEs) quickly degrade LETs and limit expression yield. Motivated by the significant benefits of using LETs in lieu of plasmid templates, numerous methods to enhance their stability in lysate-based CFEs have been developed. This review describes approaches to LET stabilization used in CFEs, summarizes the advancements that have come from using LETs with these methods, and identifies future applications and development goals that are likely to be impactful to the field. Collectively, continued improvement of LET-based expression and other linear DNA tools in CFEs will help drive scientific discovery and enable a wide range of applications, from diagnostics to synthetic biology research tools.

A novel RNA aptamer-modified riboswitch as chemical sensor

In this study, a novel label- and immobilization-free RNA aptamer-modified riboswitch-based biosensor was developed by using RNA aptamer modified secondary-structural scaffolds to control the identity of the ribosomal binding sequence (RBS). In the developed sensor, the duplex RNA aptamers-modified cis-repressor sequence is introduced upstream to the RBS of the indicating gene (gfp gene), leading to formatting an RNA bubble due to the none-complementary state of the RNA aptamers in the hairpin structure of the cis-repressor sequence. Without the presence of the target molecule, the ribosome cannot identify the RBS of the indicating gene as the RBS is hidden by the introduced cis-repressor, consequently, the indicating gene in the sensor would not be expressed, demonstrating the absence of the target. On the contrary, with the presence of the target molecule, the binding of aptamer with the target would induce the enlargement of the RNA bubble, leading to the separation of the cis-repressor sequence and RBS. Hence, the indicating gene would be expressed, manifesting the existence of the target. In addition, the developed sensor can quantitatively report the target concentrations by measuring the gfp gene-encoded GFP (green fluorescent protein) concentration. The approach proposed in this study can be used to construct sensors for detecting various chemicals by introducing the corresponding aptamers, therefore, this strategy can potentially provide a new set of analytical tools in the field of analytical chemistry.

In Vitro Use of Cellular Synthetic Machinery for Biosensing Applications

The application of biosensors is expanding in diverse fields due to their high selectivity and sensitivity. Biosensors employ biological components for the recognition of target analytes. In addition, the amplifying nature of biosynthetic processes can potentially be harnessed to for biological transduction of detection signals. Recent advances in the development of highly productive and cost-effective cell-free synthesis systems make it possible to use these systems as the biological transducers to generate biosensing signals. This review surveys recent developments in cell-free biosensors, focusing on the newly devised mechanisms for the biological recognition of analytes to initiate the amplification processes of transcription and translation.

Creating an in vivo bifunctional gene expression circuit through an aptamer-based regulatory mechanism for dynamic metabolic engineering in Bacillus subtilis

Aptamer-based regulatory biosensors can dynamically regulate the expression of target genes in response to ligands and could be used in dynamic metabolic engineering for pathway optimization. However, the existing aptamer-ligand biosensors can only function with non-complementary DNA elements that cannot replicate in growing cells. Here, we construct an aptamer-based synthetic regulatory circuit that can dynamically upregulate and downregulate the expression of target genes in response to the ligand thrombin at transcriptional and translational levels, respectively, and further used this system to dynamically engineer the synthesis of 2'-fucosyllactose (2'-FL) in Bacillus subtilis. First, we demonstrated the binding of ligand molecule thrombin with the aptamer can induce the unwinding of fully complementary double-stranded DNA. Based on this finding, we constructed a bifunctional gene expression regulatory circuit using ligand thrombin-bound aptamers. The expression of the reporter gene ranged from 0.084- to 48.1-fold. Finally, by using the bifunctional regulatory circuit, we dynamically upregulated the expression of key genes fkp and futC and downregulated the expression of gene purR, resulting in the significant increase of 2'-FL titer from 24.7 to 674 mg/L. Compared with the other pathway-specific dynamic engineering systems, here the constructed aptamer-based regulatory circuit is independent of pathways, and can be generally used to fine-tune gene expression in other microbes.

A novel photosensitive dual-sensor for simultaneous detection of nucleic acids and small chemical molecules

Sensors that can rapidly and specifically detect nucleic acids and chemical molecules can revolutionize the diagnosis and treatment of diseases by allowing molecular-level informations to be used during the routine medicines. In this study, we demonstrated a novel dual-sensor that can be used to simultaneously detect any nucleic acids and chemical molecules whose binding aptamers can be found or synthesized. In the developed dual-sensor, the specifically designed PTG (a photosensitive azobenzene derivative carrying one photoisomerizable azobenzene moiety, one threoninol terminal and one guanidinium terminal) molecules are introduced into the unwinding region of two T7 promoters, and two DNA bubbles are introduced upstream of the two T7 promoters. Without the target, the indicating gene in the dual-tensor would not be expressed since the binding with RNAPs (RNA polymerases) cannot melt the T7 promoter for the indicating gene due to the integration of the DNA double strands via the PTG molecules, manifesting the absence of the target nucleic acid and chemical molecule. While with the presence of the target nucleic acid and/or chemical molecule, the indicating gene would be expressed as the T7 promoter contained in the enlarged DNA bubble can be melted and transcribed by the bound RNAPs as the enlarged DNA bubble can help the separation of the two DNA strands, demonstrating the existence of target nucleic acid and/or chemical molecule.

Transcription Driven by Reversible Photocontrol of Hyperstable G-Quadruplexes

G-quadruplexes occur in promoter regions, 5'-untranslated regions of mRNA and telomeric regions, and they function as regulatory elements for various key biological events, such as transcription, translation, and telomere elongation. As the stability of G-quadruplexes dramatically impacts these biological processes, controlling G-quadruplex stability via external stimuli such as light enables regulation of important biological phenomena with high spatial and temporal resolution. Here, we report a method for reversible photoregulation of transcription by controlling the stability of G-quadruplexes via cis- trans photoisomerization of photochromic nucleobase (PCN). Transcription was effectively inhibited when the PCN-modified G-quadruplex was in a hyperstable state, whereas transcription activity recovered markedly when the G-quadruplex changed to an unstable state induced by trans to cis PCN photoisomerization. Moreover, a reversibly photoactivatable plasmid was constructed by introducing PCN-modified G-quadruplexes downstream of the cytomegalovirus promoter of the pCS2 plasmid, which was used to demonstrate photoregulation of gene expression in zebrafish embryos.