Grafted glycopolymer-based receptor mimics on polymer support for selective adhesion of bacteria

Glycopolymers for Antibacterial and Antiviral Applications

Diseases induced by bacterial and viral infections are common occurrences in our daily life, and the main prevention and treatment strategies are vaccination and taking antibacterial/antiviral drugs. However, vaccines can only be used for specific viral infections, and the abuse of antibacterial/antiviral drugs will create multi-drug-resistant bacteria and viruses. Therefore, it is necessary to develop more targeted prevention and treatment methods against bacteria and viruses. Proteins on the surface of bacteria and viruses can specifically bind to sugar, so glycopolymers can be used as potential antibacterial and antiviral drugs. In this review, the research of glycopolymers for bacterial/viral detection/inhibition and antibacterial/antiviral applications in recent years are summarized.

Dopamine Assisted Self-Cleaning, Antifouling, and Antibacterial Coating via Dynamic Covalent Interactions

The rapid accumulation of dead bacteria or protein on a bactericidal surface can reduce the effectiveness of the modified surface and alter its biocidal activity by shielding the surface biocide functional groups, promoting microbial attachment and subsequent biofilm formation. Thus, the alteration of biocidal activity due to biofilm formation can cause serious trouble including severe infection or implant or medical device failure leading to death. Therefore, developing a smart self-cleaning surface is of great interest. Ideally, such a surface can not only kill the attached microbials but also release the dead cells and foulants from the surface under a particular incitement on demand. In this project, a sugar-responsive self-cleaning coating has been developed by forming covalent boronic ester bonds between catechol groups from polydopamine and a benzoxaborole pendant from zwitterionic and cationic polymers. To incorporate antifouling properties and enhance the biocompatibility of the coating, bioinspired zwitterionic compound 2-methacryloyloxyethyl phosphorylcholine (MPC) was chosen and benzoxaborole pendant containing zwitterionic polymer poly(MPC-st-MAABO) (MAABO: 5-methacrylamido-1,2-benzoxaborole) was synthesized. Additionally to impart antibacterial properties to the surface, a quaternary ammonium containing cationic polymer poly(2-(methacryloyloxy)ethyl trimethylammonium (META)-st-MAABO)) was synthesized. These synthesized polymers were covalently grafted to a polydopamine (PDA) coated surface by forming a strong cyclic boronic ester complex with a catechol group of the PDA layer endowing the surface with bacteria contact-killing properties and capturing specific protein. After the addition of cis-diol containing competitive molecules, i.e., saccharides/sugars, this boronic ester complex with a catechol group of PDA was replaced and the attached polymer layer was cleaved from the surface, resulting in the release of both absorbed protein and live/killed bacteria electrostatically attached to the polymer layer. This dynamic self-cleaning surface can be a promising material for biomedical applications avoiding the gathering of dead cells and debris that are typically encountered on a traditional biocidal surface.

Biofilm-Integrated Glycosylated Membrane for Biosuccinic Acid Production

Biofilm-based cell-immobilized fermentation technology is regarded as the technique with the most potential for biobased product (chemicals, biofuelss materials, etc.) production in industry. Glycosylated membrane can mimic natural extracellular matrix (ECM) and improve cell adhesion and biofilm formation based on carbohydrate-microbial lectin interaction. Here, we applied glycosylated membrane with rhamnose modified surface for constructing Actinobacillus succinogenes biofilm and producing biosuccinic acid. Polymer hollow fiber (PHF) membrane surface was first modified by glycosylation based on physical adsorption approach. The approach is simple, green, and suitable for scale-amplification. Then, the microbial biofilm formed dramatically on the modified membrane surface. And for subsequent biosuccinic acid production, the maximum titer of succinic acid reached 67.3 g/L, and the yield was 0.82 g/g. Compared with free cell fermentation, the titer and yield increased by 18% and 9% in this biofilm-based cell-immobilized fermentation system, respectively. Importantly, the production efficiency of biosuccinic acid increased obviously for subsequent biofilm-based cell-immobilized fermentation. In addition, the biofilm-integrated glycosylated membrane showed high reusability for succinic acid production. This result is important for developing biofilms for a wide range of applications in bioproduct (chemicals, biofuels, materials, etc.) production.

Polymer Membrane with Glycosylated Surface by a Chemo-Enzymatic Strategy for Protein Affinity Adsorption

Membranes with glycosylated surfaces are naturally biomimetic and not only have excellent surface hydrophilicity and biocompatibility, but have a specific recognition to target biomacromolecules due to the unique chemo-biological properties of their surface carbohydrates; however, they cannot be easily chemically produced on large scales due to the complex preparation process. This manuscript describes the fabrication of a polypropylene membrane with a glycosylated surface by a chemo-enzymatic strategy. First, hydroxyl (OH) groups were introduced onto the surface of microporous polypropylene membrane (MPPM) by UV-induced grafting polymerization of oligo(ethylene glycol) methacrylate (OEGMA). Then, glycosylation of the OH groups with galactose moieties was achieved via an enzymatic transglycosylation by β-galactosidase (Gal) recombinanted from E. coli. The fabricated glycosylated membrane showed surprisingly specific affinity adsorption to lectin ricinus communis agglutinin (RCA120). The chemo-enzymatic route is easy and green, and it would be expected to have wide applications for large-scale preparation of polymer membranes with glycosylated surfaces.

Uniform and Easy-To-Prepare Glycopolymer-Brush Interface for Rapid Protein (Anti-)Adhesion Sensing

Glycopolymers have emerged as powerful and versatile glycan analogues for the investigation of cellular signal transduction. In this study, a layer of the glycopolymer-brush (GlyB) interface was functionalized on the surface of gold substrates. In order to enhance the capability and accessibility of this transducer interface, a combined protocol of copper(0)-mediated living radical polymerization (Cu(0)-LRP) with subsequent "CuAAC" click reaction was utilized to synthesize a set of novel glycopolymer precursors with a tunable scaffold structure and pyranose ligands. The resulting glycopolymer exhibited a fine-tuned molecular weight with a minor dispersity of 1.27. Through surface plasmon resonance (SPR) analysis, various GlyB interfaces exhibiting different saccharide moieties (glucose, mannose, and galactose) were examined to study their adhesion or antiadhesion potential toward three types of proteins, concanavalin A, bovine serum albumin, and peanut agglutinin (PNA). The strong affinity between poly(galactose) and PNA was further employed to construct a proof-of-concept aggregation-mediated sensing system. This minimal naked-eye sensor that consisted of only two substances, namely, gold nanoparticles and glycopolymers, was characterized and tested for its potential in protein quantification.

High Throughput Screening of Glycopolymers: Balance between Cytotoxicity and Antibacterial Property

To search for synthetic agents with low cytotoxicity and good antibacterial activity is essential for antimicrobial applications. Here we report a high throughput technique that carried out in multiwell plates via recyclable-catalyst-aided, opened-to-air, and sunlight-photolyzed RAFT (ROS-RAFT) polymerization. By using this method, three key monomers (MAG the sugar unit, DMAPMA the positively charged monomer, and DEMAA the hydrophobic monomer) can be polymerized in a controlled manner to afford glycopolymers. This simple high throughput technology is used to synthesize glycopolymers with variable compositions. The bacterial adhesion/killing ability and cytotoxicity of synthesized polymers have been evaluated, and glycopolymers with certain composition can achieve a balance of low cytotoxic and good antibacterial activity.

One-Pot Multicomponent Synthesis of Glycopolymers through a Combination of Host-Guest Interaction, Thiol-ene, and Copper-Catalyzed Click Reaction in Water

There is a common phenomenon that the heterogeneity of natural oligosaccharides contains various sugar units, which can be used to enhance affinity and selectivity toward a specific receptor, so the synthesis of heterogeneous glycopolymers is always an important issue in the glycopolymer field. Herein, this study conducts a one-pot method to prepare polyrotaxane-based heteroglycopolymers anchored with different sugar units and fluorescent moieties via the combination of host-guest interaction, thiol-ene, and copper-catalyzed click chemistry in water. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, X-ray diffraction, and Ellman's assay test are used in the paper to characterize the compounds. Quartz crystal microbalance-dissipation (QCD-D) experiments and bacterial adhesion assay are utilized to study the interactions of polyrotaxane-based heteroglycopolymers with Con A and Escherichia coli. The results reveal that polyrotaxanes (PRs) with mannose and glucose present better specificity toward Con A and E. coli than PRs with glucose due to synergistic effects.

Glycopolymer-Functionalized Cryogels as Catch and Release Devices for the Pre-Enrichment of Pathogens

A highly porous cryogel is prepared and subsequently functionalized with an atom transfer radical polymerization (ATRP) initiator at the surface. Two new glycomonomers are introduced, which possess deprotected mannose as well as glucose moieties. These are copolymerized with N-isopropylacrylamide (NiPAm) from the cryogel surface, providing a highly hydrophilic porous material, which is characterized by SEM, FT-IR spectroscopy, and NMR spectroscopy. This functionalized support can be applied for affinity chromatography of whole cells owing to the high pore space and diameter. Such an application is exemplified by investigating the ability to capture Escherichia coli bacteria, revealing selective binding interactions of the bacteria with the mannose glycopolymer-functionalized cryogel surface. Thus, the presented glycopolymer-cryogel represents a promising material for affinity chromatography or enrichment of cells.

pH and glucose responsive nanofibers for the reversible capture and release of lectins

A dual pH and glucose responsive boronic acid containing nanofiber was constructed for the reversible capture and release of lectins. The effects of surface groups and pH values on selective lectin capture were investigated by fluorescence microscopy. Compared to the pristine nanofibrous membrane, glucose and galactose functionalized nanofiber surfaces showed significantly higher capture of ConA and Jacalin, under alkaline conditions. On the other hand, treatment of the modified nanofibers with an acidic solution resulted in the detachment of both the lectins and glycopolymers from the nanofiber surface. As expected, once the glycopolymers are displaced, no lectins were adhered to the nanofiber surface under alkaline conditions. These functional nanofibers can therefore be easily modified and hence can be used for quick removal of selective proteins or toxins from the solution.

Membrane adsorbers comprising grafted glycopolymers for targeted lectin binding

This work details the design and testing of affinity membrane adsorbers for lectin purifications that incorporate glucose-containing glycopolymers. It is the selective interaction between the sugar residues of the glycopolymer and the complementary carbohydrate-binding domain of the lectin that provides the basis for the isolation and purification of lectins from complex biological media. The design approach used in these studies was to graft glycopolymer 'tentacles' from macroporous regenerated cellulose membranes by atom transfer radical polymerization. As shown in earlier studies, this design approach can be used to prepare high-productivity membrane adsorbers. The model lectin, concanavalin A (conA), was used to evaluate membrane performance in bind-and-elute purification, using a low molecular weight sugar for elution. The membrane capacity for binding conA was measured at equilibrium and under dynamic conditions using flow rates of 0.1 and 1.0 mL/min. The first Damkohler number was estimated to relate the adsorption rate to the convective mass transport rate through the membrane bed. It was used to assess whether adsorption kinetics or mass transport contributed the primary limitation to conA binding. Analyses indicate that this system is not limited by the accessibility of the binding sites, but by the inherent rate of adsorption of conA onto the glycopolymer.

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) elastomer via covalent immobilization of nonionic sugar-based Gemini surfactants

Gemini surfactants (GS) with sugar-containing head-groups and different alkyl chains were successfully prepared. Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) elastomer was grafted with glycidyl methacrylate (GMA) by means of UV-induced graft polymerization, and then the pGMA-grafted film was chemically immobilized with the GS. The surface graft polymerization was confirmed by ATR-FTIR and XPS. The wettability and hemocompatibility of the modified surface were characterized by means of water contact angle, protein adsorption, and platelet adhesion assays. The results showed that amphiphilic surfactant-containing polymer surfaces presented protein-resistant behavior and anti-platelet adhesion after functionalization with GS, GS1 and GS2. Besides, the hemocompatibility of the modified surface deteriorated as the length of hydrophobic chain of GS increased.

Nanopatterned smart polymer surfaces for controlled attachment, killing, and release of bacteria

Model surfaces with switchable functionality based on nanopatterned, thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes were fabricated using interferometric lithography combined with surface-initiated polymerization. The temperature-triggered hydration and conformational changes of nanopatterned PNIPAAm brushes reversibly modulate the spatial concealment and exposure of molecules that are immobilized in the intervals between nanopatterned brushes. A biocidal quaternary ammonium salt (QAS) was used to demonstrate the utility of nanopatterned PNIPAAm brushes to control biointerfacial interactions with bacteria. QAS was integrated into polymer-free regions of the substrate between nanopatterned PNIPAAm brushes. The biocidal efficacy and release properties of these surfaces were tested against Escherichia coli K12. Above the lower critical solution temperature (LCST) of PNIPAAm, desolvated, collapsed polymer chains facilitate the attachment of bacteria and expose QAS moieties that kill attached bacteria. Upon a reduction of the temperature below the LCST, swollen PNIPAAm chains promote the release of dead bacteria. These results demonstrate that nanopatterned PNIPAAm/QAS hybrid surfaces are model systems that exhibit an ability to undergo noncovalent, dynamic, and reversible changes in structure that can be used to control the attachment, killing, and release of bacteria in response to changes in temperature.

Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel

Barnacle cement (BC) was beneficially applied on stainless steel (SS) to serve as the initiator anchor for surface-initiated polymerization. The amine and hydroxyl moieties of barnacle cement reacted with 2-bromoisobutyryl bromide to provide the alkyl halide initiator for the surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA). The hydroxyl groups of HEMA polymer (PHEMA) were then converted to carboxyl groups for coupling of chitosan (CS) to impart the SS surface with both antifouling and antibacterial properties. The surface-functionalized SS reduced bovine serum albumin adsorption, bacterial adhesion, and exhibited antibacterial efficacy against Escherichia coli (E. coli). The effectiveness of barnacle cement as an initiator anchor was compared to that of dopamine, a marine mussel inspired biomimetic anchor previously used in surface-initiated polymerization. The results indicate that the barnacle cement is a stable and effective anchor for functional surface coatings and polymer brushes.