Anticoagulant surface of 316 L stainless steel modified by surface-initiated atom transfer radical polymerization

Functionalization of PLLA with Polymer Brushes to Trigger the Assembly of Fibronectin into Nanonetworks

Poly-l-lactic acid (PLLA) has been used as a biodegradable polymer for many years; the key characteristics of this polymer make it a versatile and useful resource for regenerative medicine. However, it is not inherently bioactive. Thus, here, a novel process is presented to functionalize PLLA surfaces with poly(ethyl acrylate) (PEA) brushes to provide biological functionality through PEA's ability to induce spontaneous organization of the extracellular matrix component fibronectin (FN) into physiological-like nanofibrils. This process allows control of surface biofunctionality while maintaining PLLA bulk properties (i.e., degradation profile, mechanical strength). The new approach is based on surface-initiated atomic transfer radical polymerization, which achieves a molecularly thin coating of PEA on top of the underlying PLLA. Beside surface characterization via atomic force microscopy, X-ray photoelectron spectroscopy and water contact angle to measure PEA grafting, the biological activity of this surface modification is investigated. PEA brushes trigger FN organization into nanofibrils, which retain their ability to enhance adhesion and differentiation of C2C12 cells. The results demonstrate the potential of this technology to engineer controlled microenvironments to tune cell fate via biologically active surface modification of an otherwise bioinert biodegradable polymer, gaining wide use in tissue engineering applications.

Facile synthesis of optically active helical poly(phenyl isocyanide) brushes on a silicon surface and their chiral resolution ability

Optically active helical poly(phenyl isocyanide) brushes grafted on a silicon surface were prepared and their chiral resolution ability was investigated.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Hydrophilic Polymer Brush Layers on Stainless Steel Using Multilayered ATRP Initiator Layer

Thin polymer coatings (in tens of nanometers to a micron thick) are desired on industrial surfaces such as stainless steel. In this thickness range coatings are difficult to produce using conventional methods. In this context, surface-initiated controlled polymerization method can offer a promising tool to produce thin polymer coatings via bottom-up approach. Furthermore, the industrial surfaces are chemically heterogeneous and exhibit surface features in the form of grain boundaries and grain surfaces. Therefore, the thin coatings must be equally effective on both the grain surfaces and the grain boundary regions. This study illustrates a novel "periodic rejuvenation of surface initiation" process using surface-initiated ATRP technique to amplify the graft density of poly(oligoethylene glycol)methacrylate (POEGMA) brush layers on stainless steel 316L surface. The optimized conditions demonstrate a controlled, macroscopically homogeneous, and stable POEGMA brush layer covering both the grain surface and the grain boundary region. Various relevant parameters-surface cleaning methods, controllability of thickness, graft density, homogeneity and stability-were studied using techniques such as ellipsometer, X-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive X-ray, surface zeta potential, and infrared reflection-adsorption spectroscopy.

Construction of 3D micropatterned surfaces with wormlike and superhydrophilic PEG brushes to detect dysfunctional cells

Detection of dysfunctional and apoptotic cells plays an important role in clinical diagnosis and therapy. To develop a portable and user-friendly platform for dysfunctional and aging cell detection, we present a facile method to construct 3D patterns on the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) with poly(ethylene glycol) brushes. Normal red blood cells (RBCs) and lysed RBCs (dysfunctional cells) are used as model cells. The strategy is based on the fact that poly(ethylene glycol) brushes tend to interact with phosphatidylserine, which is in the inner leaflet of normal cell membranes but becomes exposed in abnormal or apoptotic cell membranes. We demonstrate that varied patterned surfaces can be obtained by selectively patterning atom transfer radical polymerization (ATRP) initiators on the SEBS surface via an aqueous-based method and growing PEG brushes through surface-initiated atom transfer radical polymerization. The relatively high initiator density and polymerization temperature facilitate formation of PEG brushes in high density, which gives brushes worm-like morphology and superhydrophilic property; the tendency of dysfunctional cells adhered on the patterned surfaces is completely different from well-defined arrays of normal cells on the patterned surfaces, providing a facile method to detect dysfunctional cells effectively. The PEG-patterned surfaces are also applicable to detect apoptotic HeLa cells. The simplicity and easy handling of the described technique shows the potential application in microdiagnostic devices.

Poly(vinylphosphonic acid) (PVPA) on titanium alloy acting as effective cartilage-like superlubricity coatings

Poly(vinylphosphonic acid) (PVPA) is a type of hydrophilic polymer that can be used in surface modifications. In our study, PVPA coatings were formed on the surfaces of titanium alloy (Ti6Al4V) using a simple and novel method to achieve efficient lubrication at friction interfaces. The composition and 3D skeletal structure of the PVPA coatings were confirmed by X-ray photoelectron spectroscopy (XPS), focused ion beam/scanning electron microscopy (FIB/SEM), and solid-state nuclear magnetic resonance (NMR). The PVPA-modified Ti6Al4V/polytetrafluoroethylene (PTFE) interface shows a superlow friction coefficient (approximately 0.006) for at least 8 h under a contact pressure of 44.2 MPa (initial pressure), which means it falls into the superlubricity regime. Moreover, wear on the surfaces of both the Ti6Al4V and PTFE after the tribological experiment is superlow. It is proposed that the 3D skeletal structure of the PVPA coating and fluid-like manner at friction interfaces owing to the fast exchange of water molecules are the main factors accounting for the superlow friction and wear. The PVPA-modified Ti6Al4V has the potential uses in artificial cervical discs.

Facile fabrication of biocompatible and tunable multifunctional nanomaterials via iron-mediated atom transfer radical polymerization with activators generated by electron transfer

A novel strategy of preparing multifunctional nanoparticles (NPs) with near infra red (NIR) fluorescence and magnetism showing good hydrophilicity and low toxicity was developed via surface-initiated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of poly(ethylene glycol) monomethyl ether methacrylate (PEGMA) and glycidyl methacrylate (GMA) employing biocompatible iron as the catalyst on the surface of silica coated iron oxide (Fe3O4@SiO2) NPs. The small molecules (CS2), a NIR fluorescent chromophore, can be fixed into the covalently grafted polymer shell of the NPs by chemical reaction through a covalent bond to obtain stable CS2 dotted NPs Fe3O4@SiO2@PPEGMA-co-PGMA@CS2. The fluorescence intensity of the as-prepared NPs could be conveniently regulated by altering the silica shell thickness (varying the feed of silica source TEOS), CS2 feed, or the feed ratio of VPEGMA/VGMA, which are easily realized in the preparation process. Thorough investigation of the properties of the final NPs including in vivo dual modal imaging indicate that such NPs are one of the competitive candidates as imaging agents proving a promising potential in the biomedical area.