Investigation of ionic conductivity and long-term stability of a LiI and KI coupled diphenylamine quasi-solid-state dye-sensitized solar cell

Ligand-free rutile and anatase TiO2nanocrystals as electron extraction layers for high performance inverted polymer solar cells

Ligand-free rutile and anatase TiO₂nanocrystals were synthesizedviaa hydrolytic sol–gel method. The improved power conversion efficiency was achieved by using anatase TiO₂nanocrystals as electron extraction layer in the organic solar cells.

Effects of TiO2 and TiC Nanofillers on the Performance of Dye Sensitized Solar Cells Based on the Polymer Gel Electrolyte of a Cobalt Redox System

Polymer gel electrolytes (PGEs) of cobalt redox system are prepared for dye sensitized solar cell (DSSC) applications. Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is used as a gelator of an acetonitrile (ACN) liquid electrolyte containing tris(2,2'-bipyridine)cobalt(II/III) redox couple. Titanium dioxide (TiO2) and titanium carbide (TiC) nanoparticles are utilized as nanofillers (NFs) of this PGE, and the effects of the two NFs on the conductivity of the PGEs, charge-transfer resistances at the electrode/PGE interface, and the performance of the gel-state DSSCs are studied and compared. The results show that the presence of TiC NFs significantly increases the conductivity of the PGE and decreases the charge-transfer resistance at the Pt counter-electrode (CE)/PGE interface. Therefore, the gel-state DSSC utilizing TiC NFs can achieve a conversion efficiency (6.29%) comparable to its liquid counterpart (6.30%), and, furthermore, the cell efficiency can retain 94% of its initial value after a 1000 h stability test at 50 °C. On the contrary, introduction of TiO2 NFs in the PGE causes a decrease of cell performances. It shows that the presence of TiO2 NFs increases the charge-transfer resistance at the Pt CE/PGE interface, induces the charge recombination at the photoanode/PGE interface, and, furthermore, causes a dye desorption in a long-term-stability test. These results are different from those reported for the iodide redox system and are ascribed to a specific attractive interaction between TiO2 and cobalt redox ions.

Effect of crystallization of Cu₂ZnSnSxSe₄-x counter electrode on the performance for efficient dye-sensitized solar cells

Cu2ZnSnSxSe4-x (CZTSSe) counter electrodes (CEs) in dye-sensitized solar cells (DSSCs) are commonly developed with porous structures, but their high surface area could also retard electron transport processes owing to the abundant grain boundaries. Herein, we employed a convenient solution method and a rapid heating process to prepare well crystalline CZTSSe CEs in DSSCs. The influence of crystallization of CZTSSe film on DSSCs performances was discussed in depth. The thermogravimetric analysis, phase morphology, conductivity, and electrochemical characteristics of CZTSSe films were performed. It is found that the rapid heating process is beneficial to the formation of well crystalline film with large grains. As the porosity and grain boundaries in the bulk film are dramatically reduced with the enhanced crystallization, the charge transport process is gradually improved. Using cyclic voltammogram and electrochemical impedance spectroscopy measurements, we propose that the accelerating charge transport is of great importance to the photovoltaic performances of DSSCs due to their superior electrocatalytic activities. As the highest cell efficiency was achieved, well crystalline CZTSSe is an efficient CE catalytic material.

Novel polymer gel electrolyte with organic solvents for quasi-solid-state dye-sensitized solar cells

A cross-linked copolymer was previously synthesized from poly(oxyethylene) diamine (POE-amine) and an aromatic anhydride and cured to generate an amide-imide cross-linking structure. The copolymer containing several chemical groups such as POE, amido acids, and imide, enabled to absorb liquid electrolytes in methoxypropionitrile (MPN) for suitable uses in dye-sensitized solar cells. To establish the advantages of polymer gel electrolytes (PGE), the same copolymer was studied by using different electrolyte solvents including propylene carbonate (PC), dimethylformamide, and N-methyl-2-pyrrolidone, and shown their long-term stability. The morphology of the copolymer after absorbing liquid electrolytes in these solvents was proven the same as a 3D interconnected nanochannels, evidenced field emission-scanning electron microscopy. Among these solvents, PC was selected as the optimized PGE, which demostrated a higher power conversion efficiency (8.31%) than that of the liquid electrolyte (7.89%). In particular, the long-term stability of only a 5% decrease in the cell efficiency after 1000 h of testing was achieved. It was proven the developed copolymer as PGE was versatile for different solvents showing high efficiency and long-term durability.

Highly efficient plastic crystal ionic conductors for solid-state dye-sensitized solar cells

We have developed highly efficient, ambient temperature, solid-state ionic conductors (SSICs) for dye-sensitized solar cells (DSSCs) by doping a molecular plastic crystal, succinonitrile (SN), with trialkyl-substituted imidazolium iodide salts. High performance SSICs with enhanced ionic conductivity (2–4 mScm⁻¹) were obtained. High performance solid-state DSSCs with power conversion efficiency of 7.8% were fabricated using our SSICs combined with unique hierarchically nanostructured TiO₂ sphere (TiO₂-SP) photoelectrodes; these electrodes have significant macroporosity, which assists penetration of the solid electrolyte into the electrode. The performance of our solid-state DSSCs is, to the best of our knowledge, the highest reported thus far for cells using plastic crystal-based SSICs, and is comparable to that of the state-of-the-art DSSCs which use ionic liquid type electrolytes. This report provides a logical strategy for the development of efficient plastic crystal-based SSICs for DSSCs and other electrochemical devices.