Methylene green electrodeposited on SWNTs-based "bucky" papers for NADH and l-malate oxidation

Rapid Entrapment of Phenazine Ethosulfate within a Polyelectrolyte Complex on Electrodes for Efficient NAD+ Regeneration in Mediated NAD+-Dependent Bioelectrocatalysis

Over the past two decades, the designs of redox polymers have become critical to the field of mediated bioelectrocatalysis and are used in commercial glucose biosensors, as well as other bioelectrochemical applications (e.g., energy harvesting). These polymers are specifically used to immobilize redox mediators on electrode surfaces, allowing for self-exchange-based conduction of electrons from enzymes far from the electrode to the electrode surface. However, the synthesis of redox polymers is challenging and results in large batch-to-batch variability. Herein, we report a rapid entrapment of mediators for NAD⁺-dependent bioelectrocatalysis within reverse ionically condensed polyelectrolytes. A high ionic strength aqueous solution of oppositely charged polyelectrolytes, composed of cationic polyguanidinium (PG) chloride and anionic sodium hexametaphosphate (P6), undergoes phase inversion into a solid microporous polyelectrolyte complex (PEC) when introduced into a low ionic strength aqueous solution. The ionic strength-triggered phase inversion of PGP6 solutions was investigated as a means to entrap mediators on the surface of electrodes for mediated bioelectrocatalysis. Compared to the traditional cross-linked immobilizations using redox polymers, this phase inversion takes place within seconds and requires up to 60 min for complete stabilization. In this work, redox mediator phenazine ethosulfate (PES) was entrapped within PGP6 on electrode surfaces for nicotinamide adenine dinucleotide (NAD⁺)-dependent bioelectrocatalysis. In the bulk solution, NAD⁺-dependent dehydrogenase enzymes catalyze the oxidation of the substrate while reducing NAD to reduced nicotinamide adenine dinucleotide (NADH). The resulting NADH is reoxidized to NAD⁺ by the entrapped PES that gets reduced on the electrode, completing the NAD⁺-regeneration-based bioelectrocatalysis. To show the use of these new materials in an application, biofuel cells were evaluated using four different anodic enzyme systems (alcohol dehydrogenase, lactate hydrogenase, glycerol dehydrogenase, and glucose dehydrogenase).

A Self-Powered Biosensor with a Flake Electrochromic Display for Electrochemical and Colorimetric Formaldehyde Detection

The formaldehyde biosensors with the features of cost effectiveness, high specificity, easy operation, and simplicity are urgently desired in routing and field detection of formaldehyde. Here, we report a new design of an enzymatic self-powered biosensor (ESPB) toward formaldehyde detection. The ESPB involves a formaldehyde dehydrogenase/poly-methylene green/buckypaper bioanode as the sensing electrode and a Prussian blue/Au nanoparticles/carbon fiber paper cathode as the electrochromic display. Formaldehyde acts as the fuel to drive the ESPB, relying on that the concentration of formaldehyde can be determined with the ESPB by both directly measuring the variance in short circuit current and observing the color change of the cathode. By measuring the variance in short circuit current, a linear detection range from 0.01 to 0.35 mM and a calculated detection limit of 0.006 mM are obtained, comparable to or better than those reported before. The color change of the cathode can be distinguished easily and exactly via the naked eye after immersing the ESPB in formaldehyde solution for 90 s with the concentration up to 0.35 mM, covering the permissive level of formaldehyde in some standards associated with environmental quality control. Specially, the formaldehyde concentration can be precisely quantified by analyzing the color change of the cathode digitally using the equation of B/(R + G + B). In the following test of real spiked samples of tap water and lake water, the recovery ratios of formaldehyde with the concentrations from 0.010 to 0.045 mM are tested to be between 95 and 100% by both measuring the variance in short circuit current and analyzing the color change of the cathode digitally. In addition, the ESPB exhibits negligible interference from acetaldehyde and ethanol and can be stored at 4 °C for 21 days with a loss of less than 8% in its initial value of short circuit current. Therefore, the ESPB with the capability of working like disposable test paper can be expected as a sensitive, simple, rapid, cost-effective colorimetric method with high selectivity in routing and field formaldehyde detection.

Energy Harvesting from the Animal/Human Body for Self-Powered Electronics

Living subjects (i.e., humans and animals) have abundant sources of energy in chemical, thermal, and mechanical forms. The use of these energies presents a viable way to overcome the battery capacity limitation that constrains the long-term operation of wearable/implantable devices. The intersection of novel materials and fabrication techniques offers boundless possibilities for the benefit of human health and well-being via various types of energy harvesters. This review summarizes the existing approaches that have been demonstrated to harvest energy from the bodies of living subjects for self-powered electronics. We present material choices, device layouts, and operation principles of these energy harvesters with a focus on in vivo applications. We discuss a broad range of energy harvesters placed in or on various body parts of human and animal models. We conclude with an outlook of future research in which the integration of various energy harvesters with advanced electronics can provide a new platform for the development of novel technologies for disease diagnostics, treatment, and prevention.

Wearable Sensor System Powered by a Biofuel Cell for Detection of Lactate Levels in Sweat

An NAD⁺-dependent enzymatic sensor with biofuel cell power source system for non-invasive monitoring of lactate in sweat was designed, developed, and tested. The sensor component, based on lactate dehydrogenase, showed linear current response with increasing lactate concentrations with limits of detection from 5 to 100 mM lactate and sensitivity of 0.2 µA.mM^-1 in the presence of target analyte. In addition to the sensor patch a power source was also designed, developed and tested. The power source was a biofuel cell designed to oxidize glucose via glucose oxidase. The biofuel cell showed excellent performance, achieving over 80 mA at 0.4 V (16 mW) in a footprint of 3.5 × 3.5 × 0.7 cm. Furthermore, in order to couple the sensor to the power source, system electronic components were designed and fabricated. These consisted of an energy harvester (EH) and a micropotentiostat (MP). The EH was employed for harvesting power provided by the biofuel cell as well as up-converting the voltage to 3.0 V needed for the operation of the MP. The sensor was attached to MP for chronoamperometric detection of lactate. The Sensor Patch System was demonstrated under laboratory conditions.

Paper-Based Device for Rapid Visualization of NADH Based on Dissolution of Gold Nanoparticles

We describe a paper-based device that enables rapid and sensitive room-temperature detection of dihydronicotinamide adenine dinucleotide (NADH) via a colorimetric readout and demonstrate its value for monitoring NAD+-driven enzymatic reactions. Our system is based on NADH-mediated inhibition of gold nanoparticle (AuNPs) dissolution in a Au3+-cetyltrimethylammonium bromide (CTAB) solution. We fabricated a device consisting of a mixed cellulose ester paper featuring a wax-encircled, AuNP-coated film atop a cotton absorbent layer sandwiched between two plastic cover layers. In the absence of NADH, the Au3+-CTAB complex dissolves the AuNP layer completely, generating a white color in the test zone. In the presence of NADH, Au3+ is rapidly reduced to Au+, greatly decreasing the dissolution of AuNPs and yielding a red color that becomes stronger at increasing concentrations of NADH. This device exploits capillary force-assisted vertical diffusion, allowing us to apply a 25 μL sample to a surface-confined test zone to achieve a detection limit of 12.5 μM NADH. We used the enzyme glucose dehydrogenase as a model to demonstrate that our paper-based device can monitor NAD+-driven biochemical processes with and without selective dehydrogenase inhibitors by naked-eye observation within 4 min at room temperature in a small sample volume. We believe that our paper-based device could offer a valuable and low-cost analytical tool for monitoring NAD+-associated enzymatic reactions and screening for dehydrogenase inhibitors in a variety of testing contexts.

A bioelectronic system for insulin release triggered by ketone body mimicking diabetic ketoacidosis in vitro

A bioelectronic system was activated with a biomarker of diabetic ketoacidosis to release insulin operating as a Sense-and-Act device.

Facilitation of high-rate NADH electrocatalysis using electrochemically activated carbon materials

Electrochemical activation of glassy carbon, carbon paper and functionalized carbon nanotubes via high-applied-potential cyclic voltammetry leads to the formation of adsorbed, redox active functional groups and increased active surface area. Electrochemically activated carbon electrodes display enhanced activity toward nicotinamide adenine dinucleotide (NADH) oxidation, and more importantly, dramatically improved adsorption of bioelectrochemically active azine dyes. Adsorption of methylene green on an electroactivated carbon electrode yields a catalyst layer that is 1.8-fold more active toward NADH oxidation than an electrode prepared using electropolymerized methylene green. Stability studies using cyclic voltammetry indicate 70% activity retention after 4000 cycles. This work further facilitates the electrocatalysis of NADH oxidation for bioconversion, biosensor and bioenergy processes.

Effect of enzymatic orientation through the use of syringaldazine molecules on multiple multi-copper oxidase enzymes

The effect of proper enzyme orientation at the electrode surface was explored for two multi-copper oxygen reducing enzymes: Bilirubin Oxidase (BOx) and Laccase (Lac).

Electrochemical oxidation of dihydronicotinamide adenine dinucleotide at nitrogen-doped carbon nanotube electrodes

Nitrogen-doped carbon nanotubes (N-CNTs) substantially lower the overpotential necessary for dihydronicotinamide adenine dinucleotide (NADH) oxidation compared to nondoped CNTs or traditional carbon electrodes such as glassy carbon (GC). We observe a 370 mV shift in the peak potential (Ep) from GC to CNTs and another 170 mV shift from CNTs to 7.4 atom % N-CNTs in a sodium phosphate buffer solution (pH 7.0) with 2.0 mM NADH (scan rate 10 mV/s). The sensitivity of 7.4 atom % N-CNTs to NADH was measured at 0.30 ± 0.04 A M(-1) cm(-2), with a limit of detection at 1.1 ± 0.3 μM and a linear range of 70 ± 10 μM poised at a low potential of -0.32 V (vs Hg/Hg2SO4). NADH fouling, known to occur to the electrode surface during NADH oxidation, was investigated by measuring both the change in Ep and the resulting loss of electrode sensitivity. NADH degradation, known to occur in phosphate buffer, was characterized by absorbance at 340 nm and correlated with the loss of NADH electroactivity. N-CNTs are further demonstrated to be an effective platform for dehydrogenase-based biosensing by allowing glucose dehydrogenase to spontaneously adsorb onto the N-CNT surface and measuring the resulting electrode's sensitivity to glucose. The glucose biosensor had a sensitivity of 0.032 ± 0.003 A M(-1) cm(-2), a limit of detection at 6 ± 1 μM, and a linear range of 440 ± 50 μM.

X-RAY PHOTOELECTRON SPECTROSCOPY AND SCANNING ELECTROCHEMICAL MICROSCOPY STUDIES OF BRANCHED MULTIWALLED CARBON NANOTUBE PAPER MODIFIED BY ELECTROCHEMICAL GRAFTING AND CLICK CHEMISTRY

Modification of nanomaterials through electrochemical grafting is a useful approach to introduce linking groups on to the surface of these structures. This work shows the possibility of applying electrochemical grafting to branched multiwalled carbon nanotube paper with an electrical resistance of 0.1 ohm-cm, and subsequent reaction of the grafted 4-azidobenzenediazonium with ethynylferrocene through the Sharpless click chemistry reaction. A comparison is made between this paper electrode and adsorbed single-walled carbon nanotubes on a glassy carbon electrode, with electrochemistry, X-ray photoelectron spectroscopy and scanning electrochemical microscopy used for characterization.

Reagentless D-sorbitol biosensor based on D-sorbitol dehydrogenase immobilized in a sol-gel carbon nanotubes-poly(methylene green) composite

A reagentless D-sorbitol biosensor based on NAD-dependent D-sorbitol dehydrogenase (DSDH) immobilized in a sol-gel carbon nanotubes-poly(methylene green) composite has been developed. It was prepared by durably immobilizing the NAD(+) cofactor with DSDH in a sol-gel thin film on the surface of carbon nanotubes functionalized with poly(methylene green). This device enables selective determination of D-sorbitol at 0.2 V with a sensitivity of 8.7 μA mmol(-1) L cm(-2) and a detection limit of 0.11 mmol L(-1). Moreover, this biosensor has excellent operational stability upon continuous use in hydrodynamic conditions.

Biofuel cells for biomedical applications: colonizing the animal kingdom

Interdisciplinary research has combined the efforts of many scientists and engineers to gain an understanding of biotic and abiotic electrochemical processes, materials properties, biomedical, and engineering approaches for the development of alternative power-generating and/or energy-harvesting devices, aiming to solve health-related issues and to improve the quality of human life. This review intends to recapitulate the principles of biofuel cell development and the progress over the years, thanks to the contribution of cross-disciplinary researchers that have combined knowledge and innovative ideas to the field. The emergence of biofuel cells, as a response to the demand of electrical power devices that can operate under physiological conditions, are reviewed. Implantable biofuel cells operating inside living organisms have been envisioned for over fifty years, but few reports of implanted devices have existed up until very recently. The very first report of an implanted biofuel cell (implanted in a grape) was published only in 2003 by Adam Heller and his coworkers. This work was a result of earlier scientific efforts of this group to "wire" enzymes to the electrode surface. The last couple of years have, however, seen a multitude of biofuel cells being implanted and operating in different living organisms, including mammals. Herein, the evolution of the biofuel concept, the understanding and employment of catalyst and biocatalyst processes to mimic biological processes, are explored. These potentially green technology biodevices are designed to be applied for biomedical applications to power nano- and microelectronic devices, drug delivery systems, biosensors, and many more.

Modification of carbon nanotube electrodes with 1-pyrenebutanoic acid, succinimidyl ester for enhanced bioelectrocatalysis

Conductive materials functionalized with redox enzymes provide bioelectronic architectures with application to biological fuel cells and biosensors. Effective electron transfer between the enzyme (biocatalyst) and the conductive materials is imperative for function. Various nanostructured carbon materials are common electrode choices for these applications as both the materials' inherent conductivity and physical integrity aids optimal performance. The following chapter presents a method for the use of carbon nanotube buckypaper as a conductive architecture suitable for biocatalyst functionalization. In order to securely attach the biocatalyst to the carbon nanotube surface, the conductive buckypaper is modified with the heterobifunctional cross-linker, 1-pyrenebutanoic acid, succinimidyl ester. The technique effectively tethers the enzyme to the carbon nanotube which enhances bioelectrocatalysis, preserves the conductive nature of the carbon surface, and facilities direct electron transfer between the catalyst and material interface. The approach is demonstrated using phenol oxidase (laccase) and pyrroloquinoline quinone-dependent glucose dehydrogenase PQQ-GDH, as representative biocatalysts.