Biofunctionalization of 3D nylon 6,6 scaffolds using a two-step surface modification

Piezoelectric inkjet printing of tyrosinase (polyphenol oxidase) enzyme on atmospheric plasma treated polyamide fabric

Tyrosinase enzyme was digitally printed on plasma pretreated polyamide-6,6 fabric using several sustainable technologies. Ink containing carboxymethyl cellulose was found to be the most suitable viscosity modifier for this enzyme. Before and after being deposited on the fabric surface, the printed inks retained enzyme activity of 69% and 60%, respectively, compared to activity prior printing process. A good number of the printed enzyme was found to be strongly adsorbed on the fabric surface even after several rinsing cycles due to surface activation by plasma treatment. Rinsed out fabrics retained a maximum activity of 34% resulting from the well-adsorbed enzymes. The activity of tyrosinase on printed fabrics was more stable than ink solution for at least 60 days. Effects of pH, temperature and enzyme kinetics on ink solution and printed fabrics were assessed. Tyrosinase printed synthetic fabrics can be utilized for a range of applications from biosensing and wastewater treatment to cultural heritage works.

Immobilized enzymes as potent antibiofilm agent

Biofilm has been a point of concern in hospitals and various industries. They not only cause various chronic infections but are also responsible for the degradation of various medical appliances. Since the last decade, various alternate strategies are being adopted to combat the biofilm formed on various biotic and abiotic surfaces. The use of enzymes as a potent anti-fouling agent is proved to be of utmost importance as the enzymes can inhibit biofilm formation in an eco-friendly and cost-effective way. The physical and chemical immobilization of the enzyme not only leads to the improvement of thermostability and reusability of the enzyme, but also gains better efficiency of biofilm removal. Immobilization of amylase, cellobiohydrolase, pectinase, subtilisin A and β-N-acetyl-glucosaminidase (DspB) are proved to be most effective in inhibition of biofilm formation and removal of matured biofilm than their free forms. Hence, these immobilized enzymes provide greater eradication of biofilm formed on various surfaces and are coming up to be the potent antibiofilm agent.

Nylon mesh-based 3D scaffolds for the adherent culture of neural stem/progenitor cells

We developed novel scaffolds for the adherent culture of neural stem/progenitor cells on the woven mesh. Nylon mesh (NM) is an inert material for cell adhesion. We prepared polyacrylic acid-grafted nylon mesh (PAA-NM) by graft polymerization method using gamma-irradiation. Matrigel was covalently immobilized to the carboxyl groups in PAA-NM by chemical conjugation using 1-ethyl-3-(3-dimethylamino propyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) to prepare the Matrigel-immobilized PAA-grafted nylon mesh (M-PAA-NM). Cell adhesion property of mouse neural stem/progenitor cells (NSPCs) between the NM, PAA-NM, and M-PAA-NM was different from each other. The neurosphere-like clusters of NSPCs were weakly bound to NM and PAA-NM without spreading. The NSPCs were firmly adhered to, spread, and covered the surface of M-PAA-NM. We evaluated the state of differentiation by quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) and immnocytochemistry. A neuronal marker β III tubulin, a glial marker glial fibrillary acidic protein (GFAP) and a mature glial marker S100β were expressed at a low level in the cultured cells while immature NSPCs marker Nestin and Sox2 were slightly lower without significant statistical difference. We concluded that the M-PAA-NM is a good substrate for adherent culture of NSPCs without triggering their cell differentiation, and also provides the maintenance of their growth with fewer passages in comparison with the conventional suspension culture of NSPCs in neurospheres.

Binary-blend fibber-based capture assay of circulating tumor cells for clinical diagnosis of colorectal cancer

Background

In addition to conventional approaches, detecting and characterizing CTCs in patient blood allows for early diagnosis of cancer metastasis.

Methods

We blended poly(ethylene oxide) (PEO) into nylon-6 through electrospinning to generate a fibrous matbased circulating tumour cells (CTCs) assay. The contents of nylon-6 and PEO in the electrospun blend fibrous mats (EBFMs) were optimized to facilitate high cell-substrate affinity and low leukocyte adsorption.

Results

Compared with the IsoFlux System, a commercial instrument for CTC detection, the CTC assay of EBFMs exhibited lower false positive readings and high sensitivity and selectivity with preclinical specimens. Furthermore, we examined the clinical diagnosis accuracy of colorectal cancer, using the CTC assay and compared the results with those identified through pathological analyses of biopsies from colonoscopies. Our positive expressions of colorectal cancer through CTC detection completely matched those recognized through the pathological analyses for the individuals having stage II, III, and IV colorectal cancer. Nevertheless, two in four individuals having stage I colorectal cancer, recognized through pathological analysis of biopsies from colonoscopies, exhibited positive expression of CTCs. Ten individuals were identified through pathological analysis as having no colorectal tumours. Nevertheless, two of these ten individuals exhibited positive expression of CTCs.

Conclusions

Thus, in this population, the low cost EBFMs exhibited considerable capture efficiency for the non-invasive diagnosis of colorectal cancer.

Biomimetic heterogenous elastic tissue development

There is an unmet need for artificial tissue to address current limitations with donor organs and problems with donor site morbidity. Despite the success with sophisticated tissue engineering endeavours, which employ cells as building blocks, they are limited to dedicated labs suitable for cell culture, with associated high costs and long tissue maturation times before available for clinical use. Direct 3D printing presents rapid, bespoke, acellular solutions for skull and bone repair or replacement, and can potentially address the need for elastic tissue, which is a major constituent of smooth muscle, cartilage, ligaments and connective tissue that support organs. Thermoplastic polyurethanes are one of the most versatile elastomeric polymers. Their segmented block copolymeric nature, comprising of hard and soft segments allows for an almost limitless potential to control physical properties and mechanical behaviour. Here we show direct 3D printing of biocompatible thermoplastic polyurethanes with Fused Deposition Modelling, with a view to presenting cell independent in-situ tissue substitutes. This method can expeditiously and economically produce heterogenous, biomimetic elastic tissue substitutes with controlled porosity to potentially facilitate vascularisation. The flexibility of this application is shown here with tubular constructs as exemplars. We demonstrate how these 3D printed constructs can be post-processed to incorporate bioactive molecules. This efficacious strategy, when combined with the privileges of digital healthcare, can be used to produce bespoke elastic tissue substitutes in-situ, independent of extensive cell culture and may be developed as a point-of-care therapy approach.

Polyamides and their functionalization: recent concepts for their applications as biomaterials

Recent strategies for the applications of nylon composites, pristine nylons and chemically modified nylon polymers as biomaterials are elucidated.

Clinical diagnosis of colorectal cancer using electrospun triple-blend fibrous mat-based capture assay of circulating tumor cells

Conventional in vitro circulating tumor cell (CTC) detection methods are always limited by the blood sample volume because of the extremely low abundance of CTCs among the large number of hematologic cells. The aim of this study was to overcome this limitation by designing and constructing an in vitro CTC capture assay. We blended poly(sulfobetaine methacrylate) (PSBMA) and poly(acrylic acid) (PAA) into nylon-6 through electrospinning to generate a fibrous mat-based capture assay of CTCs. The contents of nylon-6, PSBMA, and PAA in the electrospun triple-blend fibrous mats (ETBFMs) were optimized to avoid degradation and to balance between the non-biofouling behavior and the antibody immobilizing efficiency. In addition, we examined the capture ability of CTCs for clinical diagnoses of colorectal cancer, in comparison with the results identified through pathological analyses of biopsies from colonoscopies. For nine individuals with stage II, III, and IV colorectal cancer, our CTC detection with ETBFMs provided complete positive expression. Two of four individuals were diagnosed to possess stage I colorectal cancer. Two of seven individuals without colorectal tumor, as identified through pathological analyses of biopsies, exhibited positive expression of CTCs. These positive results suggest that such ETBFMs are promising materials for in vitro CTC capture assays.

Antibiofilm properties of interfacially active lipase immobilized porous polycaprolactam prepared by LB technique

Porous biomaterial is the preferred implant due to the interconnectivity of the pores. Chances of infection due to biofilm are also high in these biomaterials because of the presence of pores. Although biofilm in implants contributes to 80% of human infections, there are no commercially available natural therapeutics against it. In the current study, glutaraldehyde cross linked lipase was transferred onto a activated porous polycaprolactam surface using Langmuir-Blodgett deposition technique, and its thermostability, slimicidal, antibacterial, biocompatibility and surface properties were studied. There was a 20% increase in the activity of the covalently crosslinked lipase when compared to its free form. This immobilized surface was thermostable and retained activity and stability until 100°C. There was a 2 and 7 times reduction in carbohydrate and 9 and 5 times reduction in biofilm protein of Staphylococcus aureus and Escherichia coli respectively on lipase immobilized polycaprolactam (LIP) when compared to uncoated polycaprolactam (UP). The number of live bacterial colonies on LIP was four times less than on UP. Lipase acted on the cell wall of the bacteria leading to its death, which was confirmed from AFM, fluorescence microscopic images and amount of lactate dehydrogenase released. LIP allowed proliferation of more than 90% of 3T3 cells indicating that it was biocompatible. The fact that LIP exhibits antimicrobial property at the air-water interface to hydrophobic as well as hydrophilic bacteria along with lack of cytotoxicity makes it an ideal biomaterial for biofilm prevention in implants.

Carboxybetaine methacrylate-modified nylon surface for circulating tumor cell capture

Conventional in vitro circulating tumor cell (CTC) detection methods are always limited by blood sample volume because of the requirement of a large amount of blood. The aim of this study was to overcome the limitation by designing and making an in vivo CTC capture device. In this study, we designed and prepared a kind of proper material to serve the purpose of intervention. A method employing 3-aminopropyltriethoxysilane (γ-APS) as the coupling reagent to graft carboxybetaine methacrylate (CBMA) and to immobilize an anti-epithelial cell adhesion molecular (EpCAM) antibody on Nylon was developed. The results of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy proved the successful graft of γ-APS and CBMA to Nylon. Furthermore, the predicted improvement in the biocompatibilities of our modified Nylon was confirmed by water contact angle measurement, bovine serum albumin adhesion, platelet adhesion, plasma recalcification time determination, and cytotoxicity tests. The tumor cells adhesion experiment revealed that Nylon with the antibody immobilized on it had an affinity for EpCAM positive tumor cells higher than that of pristine Nylon. Additionally, the capture ability of the CTCs was demonstrated in a nude mouse tumor model using the interventional device made of the modified Nylon wire. The positive results suggest that CBMA-grafted and anti-EpCAM antibody-immobilized Nylon is a promising new material for in vivo CTC capture devices.