Preparation of Super-Stable Gold Nanorods via Encapsulation into Block Copolymer Micelles

Colorimetric Detection of Sulfide Anions via Redox-Modulated Surface Chemistry and Morphology of Au-Hg Nanorods

A new colorimetric assay for the detection of sulfide anions with high sensitivity and selectivity is reported, utilizing Au-Hg alloy nanorods (Au-HgNRs) as probe. Au-HgNRs were prepared by modifying gold nanorods (AuNRs) with reducing agent and mercury ions. In an aqueous solution with sulfide anions, the formation of mercuric sulfide due to redox reaction between the amalgams and sulfide anions greatly changed the surface chemistry and morphology of the Au-HgNRs, leading to a red shift of the localized surface plasmon resonance (LSPR) absorption peak, accompanied by a change in colorimetric response. A good linear relationship was obtained between the LSPR peak wavelength shift and concentration of sulfide anion in the range of 1 × 10⁻⁵−1 × 10⁻⁴mol/L. The selectivity of this method has been investigated by other anions. The colorimetric sensing system successfully detected sulfide in wastewater from leather industry.

Encapsulation of Gold Nanorods with Porphyrins for the Potential Treatment of Cancer and Bacterial Diseases: A Critical Review

Cancer and bacterial diseases have been the most incidental diseases to date. According to the World Health Report 2018, at least every family is affected by cancer around the world. In 2012, 14.1 million people were affected by cancer, and that figure is bound to increase to 21.6 million in 2030. Medicine therefore sorts out ways of treatment using conventional methods which have been proven to have many side effects. Researchers developed photothermal and photodynamic methods to treat both cancer and bacterial diseases. These methods pose fewer effects on the biological systems but still no perfect method has been synthesized. The review serves to explore porphyrin and gold nanorods to be used in the treatment of cancer and bacterial diseases: porphyrins as photosensitizers and gold nanorods as delivery agents. In addition, the review delves into ways of incorporating photothermal and photodynamic therapy aimed at producing a less toxic, more efficacious, and specific compound for the treatment.

Laser-Induced CO2 Generation from Gold Nanorod-Containing Poly(propylene carbonate)-Based Block Polymer Micelles for Ultrasound Contrast Enhancement

Poly(propylene carbonate) (PPC) decomposes at high temperature to release CO₂. This CO₂-generation temperature of PPC can be reduced down to less than 80 °C with the aid of a photoacid generator (PAG). In the present work, we demonstrate that using an additional helper component, surface plasmonic gold nanorods (GNRs), the PPC degradation reaction can also be initiated by infrared (IR) irradiation. For this purpose, a PPC-containing nanoparticle formulation was developed in which PPC-based amphiphilic block copolymers (BCPs), poly(poly(ethylene glycol) methacrylate- b-propylene carbonate- b-poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA), were self-assembled with GNRs and PAG molecules via solvent exchange. Under IR irradiation, GNRs produce heat that can cause PPC to decompose into CO₂, and PAG (after UV pretreatment) catalyzes this PPC degradation process. Two PPEGMA-PPC-PPEGMA materials were used for this study: PPEGMA_7.3K-PPC_5.6K-PPEGMA_7.3K ("G7C6G7") and PPEGMA_2.1K-PPC_5.6K-PPEGMA_2.1K ("G2C6G2"). Addition of CTAB-coated GNRs dispersed in water to a G2C6G2 solution in DMF produced individually G2C6G2-encapsulated GNRs, whereas the same solvent exchange procedure resulted in the formation of polymer-coated GNR clusters when G7C6G7 was used as the encapsulating material. GNR/G2C6G2 NPs exhibited a surface plasmon resonance peak at 697 nm. The clustered morphology of G7C6G7-encapsulated GNRs caused a blue shift of the absorbance maximum to 511 nm. As a consequence, GNR/G2C6G2 NPs showed a greater absorbance/heat generation rate under IR irradiation than did GNR/G7C6G7 NPs. The IR-induced CO₂ generation rate was about 4.2 times higher with the GNR/G2C6G2+PAG sample than that with the GNR/G7C6G7+PAG sample. Both GNR/G7C6G7+PAG and GNR/G2C6G2+PAG systems produced ultrasound contrast enhancement effects under continuous exposure to IR light for >20 min; contrast enhancement was more spatially uniform for the GNR/G2C6G2+PAG sample. These results support the potential utility of PPC as a CO₂-generating contrast agent in ultrasound imaging applications.

Nontoxic Formulations of Scintillation Nanocrystals for Use as X-ray Computed Tomography Contrast Agents

X-ray computed tomography (CT) is currently one of the most powerful, noninvasive, clinical in vivo imaging techniques, which has resulted from advances in both X-ray device and contrast enhancement technologies. The present study demonstrates, for the first time, that metal tungstates (such as CaWO₄) are promising contrast agents for X-ray, radiation, and CT imaging, because of the high X-ray mass attenuation of tungsten (W). We have developed a method of formulation, in which CaWO₄ (CWO) nanoparticles (NPs) are encapsulated within a biocompatible poly(ethylene glycol-b-d,l-lactic acid) (PEG-PLA) block copolymer (BCP) capsule. We show that these PEG-PLA-encapsulated CWO NPs (170 ± 10 nm hydrodynamic diameter) produce a higher CT contrast (by a factor of about 2) than commercial iodine-based radiocontrast agents (e.g., Iohexol) at identical molar concentrations of W or I atoms. PEG-PLA-coated CWO NPs are chemically stable and completely nontoxic. It was confirmed that the maximum tolerated dose (MTD) of this material in mice is significantly higher (250 ± 50 mg per kg body weight following a single intravenous (IV) administration) than, for instance, commercially available dextran-coated iron oxide nanoparticles that are currently used clinically as MRI contrast agents (MTD in mice ≈ 168 mg/kg per dose IV). IV-injected PEG-PLA/CWO NPs caused no histopathologic damage in major excretory organs (heart, liver, lungs, spleen, and kidney). When an IV dose of 100 mg/kg was given to mice, the blood circulation half-life was measured to be about 4 h, and more than 90% of the NPs were cleared from the mice within 24 h via the renal and hepatobiliary systems. When intratumorally administered, PEG-PLA-coated CWO NPs showed complete retention in a tumor-bearing mouse model (measurements were made up to 1 week). These results suggest that PEG-PLA-coated CWO NPs are promising materials for use in CT contrast.

Block Copolymer-Encapsulated CaWO4 Nanoparticles: Synthesis, Formulation, and Characterization

We envision that CaWO4 (CWO) nanocrystals have the potential for use in biomedical imaging and therapy because of the unique ways this material interacts with high-energy radiation. These applications, however, require development of nanoparticle (NP) formulations that are suitable for in vivo applications; primarily, the formulated nanoparticles should be sufficiently small, chemically and biologically inert, and stable against aggregation under physiological conditions. The present study demonstrates one such method of formulation, in which CWO nanoparticles are encapsulated in bioinert block copolymer (BCP) micelles. For this demonstration, we prepared three different CWO nanocrystal samples having different sizes (3, 10, and 70 nm in diameter) and shapes (elongated vs truncated rhombic). Depending on the specific synthesis method used, the as-synthesized CWO NPs contain different surfactant materials (citric acid or cetyltrimethylammonium bromide or a mixture of oleic acid and oleylamine) in the coating layers. Regardless of the type of surfactant, the original surfactant coating can be replaced with a new enclosure formed by BCP materials using a solvent-exchange method. Two types of BCPs have been tested: poly(ethylene glycol-block-n-butyl acrylate) (PEG-PnBA) and poly(ethylene glycol-block-D,L-lactic acid) (PEG-PLA). Both BCPs are able to produce fully PEGylated CWO NPs that are stable against aggregation under physiological salt conditions for very long periods of time (at least three months). The optical and radio luminescence properties of both BCP-encapsulated and surfactant-coated CWO NPs were extensively characterized. The study confirms that the BCP coating structure does not influence the luminescence properties of CWO NPs.

"Stainless" Gold Nanorods: Preserving Shape, Optical Properties, and SERS Activity in Oxidative Environment

One of the main limitations to the application of gold nanorods (Au NRs) as surface-enhanced Raman scattering (SERS) probes for in situ monitoring of chemical processes is their instability in oxidative environments. Oxidation induces progressive anisotropic shortening of the NRs, which are eventually dissolved once this process has been completed. This paper compares two types of Au NRs, obtained through different routes and characterized by similar aspect ratios but different sizes. The key factors influencing the resistance of Au NRs to oxidation were systematically investigated, showing that the reduction of free bromide species and the increase of the particle size allowed the NRs to maintain their stability under harsh environments for several weeks. The most stable Au NRs were also demonstrated to be highly efficient SERS substrates in a series of Raman experiments involving molecular probes, treated under either oxidizing or nonoxidizing conditions, which simulate the oxidation of organic pollutants in water. These hallmarks make these "stainless" Au NRs attractive tools for ultrasensitive diagnostic under real working conditions.

Colloidally stable and surfactant-free protein-coated gold nanorods in biological media

In this work, we investigate the ligand exchange of cetyltrimethylammonium bromide (CTAB) with bovine serum albumin for gold nanorods. We demonstrate by surface-enhanced Raman scattering measurements that CTAB, which is used as a shape-directing agent in the particle synthesis, is completely removed from solution and particle surface. Thus, the protein-coated nanorods are suitable for bioapplications, where cationic surfactants must be avoided. At the same time, the colloidal stability of the system is significantly increased, as evidenced by spectroscopic investigation of the particle longitudinal surface plasmon resonance, which is sensitive to aggregation. Particles are stable at very high concentrations (cAu 20 mg/mL) in biological media such as phosphate buffer saline or Dulbecco's Modified Eagle's Medium and over a large pH range (2-12). Particles can even be freeze-dried (lyophilized) and redispersed. The protocol was applied to gold nanoparticles with a large range of aspect ratios and sizes with main absorption frequencies covering the visible and the near-IR spectral range from 600 to 1100 nm. Thus, these colloidally stable and surfactant-free protein-coated nanoparticles are of great interest for various plasmonic and biomedical applications.

Strategies for interfacing inorganic nanocrystals with biological systems based on polymer-coating

A representative set of nanocrystals made of semiconductors, Au and iron oxide, surface-capped with polymer ligands presenting various metal-coordinating groups.

Nano- and microstructures of magnetic field-guided maghemite nanoparticles in diblock copolymer films

The control over the alignment of nanoparticles within a block copolymer matrix was investigated for different external magnetic fields with respect to producing well-aligned, highly oriented metal-oxide-polymer nanopatterns. Hybrid films were prepared by solution casting under a range of external magnetic fields. The nano- and microstructure of maghemite nanoparticles within poly(styrene-b-methyl methacrylate) diblock copolymer films as a function of the nanoparticle concentration was studied using optical microscopy, atomic force microscopy, scanning electron microscopy, and grazing incidence small-angle X-ray scattering. Because of a polystyrene (PS) coating, the nanoparticles are incorporated in the PS domains of the diblock copolymer morphology. At higher nanoparticle concentrations, nanoparticle aggregates perturb the block copolymer structure and accumulate at the films surface into wire-shaped stripes. These wire-shaped nanoparticle aggregates form mainly because of the competition between nanoparticle-polymer friction and magnetic dipolar interaction. The magnetic behavior of the hybrid films was probed at different temperatures for two orthogonal directions (with the line-shaped particle aggregates parallel and perpendicular to the magnetic field). The hybrid film systems show superparamagnetic behavior and remarkable shape anisotropy that render them interesting for magnetic applications.

Controlling the Location of Nanoparticles in Colloidal Assemblies of Amphiphilic Polymers by Tuning Nanoparticle Surface Chemistry

Here, we report a simple method to control the location of nanoparticles in colloidal block-copolymer assemblies by using nanoparticles modified with mixed surface ligands. The binary self-assembly of amphiphilic polymers of polystyrene-b-poly(acrylic acid) (PS-b-PAA) and gold nanoparticles (AuNPs) modified with a hydrophobic ligand, dodecanethiol (DT), led to polymer micelles with nanoparticles segregated in the core of polymer micelles. On the other hand, AuNPs modified with mixed ligands of mercaptoundecanol (MUL) and DT were distributed at the PS-PAA interface, reducing the interfacial energy between the two polymers. This result was in good agreement with the prediction by the surface energy calculations. We also showed that the AuNPs with mixed ligands can decorate preformed polymer assemblies by the interfacial self-assembly. Furthermore, we demonstrated the compartmentalization of two different types of nanoparticles in colloidal polymer assemblies based on the strategy.