Light-harvesting cross-linked polymers for efficient heterogeneous photocatalysis

Pt(II)/Pd(II)-Based Metallosupramolecular Architectures as Light Harvesting Systems and their Applications

The development of artificial light-harvesting systems mimicking the natural photosynthesis method is an ever-growing field of research. Numerous systems such as polymers, metal complexes, POFs, COFs, supramolecular frameworks etc. have been fabricated to accomplish more efficient energy transfer and storage. Among them, the supramolecular coordination complexes (SCCs) formed by non-covalent metal-ligand interaction, have shown the capacity to not only undergo single and multistep energy migration but also to utilize the harvested energy for a wide variety of applications such as photocatalysis, tunable emissive systems, encrypted anti-counterfeiting materials, white light emitters etc. This review sheds light on the light-harvesting behavior of both the 2D metallacycles and 3D metallacages where design ingenuity has been executed to afford energy harvesting by both donor ligands as well as metal acceptors.

Homogeneous-like photocatalysis: covalent immobilization of an iridium(III) complex onto polystyrene brushes grafted on SiO2 nanoparticles as a mass/charge transfer-enhanced platform

Current heterogeneous photocatalysis faces the major bottlenecks of limited mass transfer, charge recombination and tedious immobilization of expensive photocatalysts. In this work, fac-Ir(ppy)3 is directly anchored at a low cost via covalent linkage to poly(4-vinyl benzyl chloride) (PVBC) brushes grafted on SiO2 nanoparticles (PVBC@SiO2 NPs) via Friedel-Crafts alkylation, affording PVBC@SiO2 NP-supported fac-Ir(ppy)3 with high luminous efficacies such as emission lifetime and quantum yield. In the reductive cross-coupling of benzaldehydes/acetophenones with 1,4-dicyanobenzene (1,4-DCB), the as-fabricated photocatalyst affords benzhydrols in the same yields as homogeneous fac-Ir(ppy)3, except for o-substituted benzaldehydes/acetophenones. In terms of the same yields as homogeneous fac-Ir(ppy)3, a new catalytic model, named homogeneous-like photocatalysis, is proposed. In this catalytic model, the open stretching of PVBC brushes in DMSO enables the anchored fac-Ir(ppy)3 to catalyse the reaction in a similar manner as homogeneous fac-Ir(ppy)3, effectively avoiding charge recombination and mass transfer limitation. Furthermore, no significant decrease in yield (<5%) is observed over eight catalytic cycles, due to the good chemical and mechanical stabilities of PVBC@SiO2 NP-supported fac-Ir(ppy)3. Overall, the immobilization of fac-Ir(ppy)3 onto the PVBC brushes grafted on SiO2 NPs provides a mass/charge transfer-enhanced platform for supported photocatalysts.

Switchover from singlet oxygen to superoxide radical through a photoinduced two-step sequential energy transfer process

The competitive nature of type II photosensitizers in the transfer of excitation energy for the generation of singlet oxygen (1O2) presents significant challenges in the design of type I photosensitizers to produce the superoxide anion radical (O2˙-). In this study, we present an efficient method for the direct transformation of type II photosensitizers into type I photosensitizers through the implementation of an artificial light-harvesting system (ALHSs) involving a two-step sequential energy transfer process. The designed supramolecular complex (DNPY-SBE-β-CD) not only has the ability to generate 1O2 as type II photosensitizers, but also demonstrates remarkable fluorescence properties in aqueous solution, which renders it an efficient energy donor for the development of type I photosensitizers ALHSs, thereby enabling the efficient generation of O2˙-. Meanwhile, to ascertain the capability and practicality of this method, two organic reactions were conducted, namely the photooxidation reaction of thioanisole and oxidative hydroxylation of arylboronic acids, both of which display a high level of efficiency and exhibit significant catalytic performance. This work provides an efficient method for turning type II photosensitizers into type I photosensitizers by a two-step sequential energy transfer procedure.

Visible-Light-Driven α-Substituted Amines Enabled by In Situ Formation of Amine Substrate Aggregates

A visible-light-driven, photocatalyst-free, air-promoted, α-substituted reaction of amines with varying nucleophiles is described. The amine substrate aggregates formed in situ through physical π-π stacking by H2O regulation in organic solvent can absorb visible light and then generate iminium ion intermediates, which undergo nucleophilic substitution reactions with varying nucleophiles to afford α-substituted amines. This reaction features catalyst-free, good functional group tolerance, simple operation procedure, and green reaction conditions.

Extended star graph as a light-harvesting-complex prototype: Excitonic absorption speedup by peripheral energy defect tuning

We study the quantum dynamics of a photoexcitation uniformly distributed at the periphery of an extended star network (with N_{B} branches of length L_{B}). More specifically, we address here the question of the energy absorption at the core of the network and how this process can be improved (or not) by the inclusion of peripheral defects with a tunable energy amplitude Δ. Our numerical simulations reveal the existence of optimal value of energy defect Δ^{*} which depends on the network architecture. Around this value, the absorption process presents a strong speedup (i.e., reduction of the absorption time) provided that L_{B}≤L_{B}^{*} with L_{B}^{*}≈12.5/ln(N_{B}). Analytical and numerical developments are then conducted to interpret this feature. We show that the origin of this speedup takes place in the hybridization of two upper-band excitonic eigenstates. This hybridization is important when L_{B}≤L_{B}^{*} and vanishes almost totally when L_{B}>L_{B}^{*}. These structural rules we draw here could represent a potential guide for the practical design of molecular nanonetwork dedicated to the realization of efficient photoexcitation absorption.

Supramolecular polymers based on host-guest interactions for the construction of artificial light-harvesting systems

In the present work, artificial light-harvesting systems with a fluorescence resonance energy transfer (FRET) process were successfully obtained in the aqueous solution. We designed and synthesized an amphiphilic pyrene derivative with two 4-vinylpyridium arms (Pmvb), which can interact with cucurbit[8]uril (CB[8]) to form supramolecular polymer through host-guest interactions in aqueous solution. The formation of supramolecular polymers results in a significant enhancement of fluorescence, which makes Pmvb-CB[8] an ideal energy donor to construct artificial light-harvesting systems in the aqueous solution. Subsequently, two different fluorescence dyes Rhodamine B (RhB) and Sulforhodamine 101 (SR101) were introduced as energy acceptors into the solution of Pmvb-CB[8] respectively, to fabricate two different artificial light-harvesting systems. The obtained artificial light-harvesting systems can achieve an efficient energy transfer process from Pmvb-CB[8] to RhB or SR101 with high energy transfer efficiency.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

An air-tolerant polymer gel-immobilized iridium photocatalyst with pumping recyclability properties

A novel methacrylate-based cross-linked polymer gel bearing an iridium photocatalyst showed air tolerance and pumping recyclability features through its tunable swelling and deswelling ability. The photocatalytic activity of the polymer gel was demonstrated through an E-to-Z isomerisation reaction and in an azide-alkene [2+3] cycloaddition.

Metal-organic frameworks embedded in a liposome facilitate overall photocatalytic water splitting

Metal-organic frameworks (MOFs) have been studied extensively in the hydrogen evolution reaction (HER) and the water oxidation reaction (WOR) with sacrificial reagents, but overall photocatalytic water splitting using MOFs has remained challenging, principally because of the fast recombination of photo-generated electrons and holes. Here we have integrated HER- and WOR-MOF nanosheets into liposomal structures for separation of the generated charges. The HER-MOF nanosheets comprise light-harvesting Zn-porphyrin and catalytic Pt-porphyrin moieties, and are functionalized with hydrophobic groups to facilitate their incorporation into the hydrophobic lipid bilayer of the liposome. The WOR-MOF flakes consist of [Ru(2,2'-bipyridine)₃]²⁺-based photosensitizers and Ir-bipyridine catalytic centres, and are localized in the hydrophilic interior of the liposome. This liposome-MOF assembly achieves overall photocatalytic water splitting with an apparent quantum yield of (1.5 ± 1)% as a result of ultrafast electron transport from the antennae (Zn-porphyrin and [Ru(2,2'-bipyridine)₃]²⁺) to the reaction centres (Pt-porphyrin and Ir-bipyridine) in the MOFs and efficient charge separation in the lipid bilayers.

Photophysical Properties and Heterogeneous Photoredox Catalytic Activities of Ru(bpy)3 @InBTB Metal-Organic Framework (MOF)

Metal-organic frameworks (MOFs) with negatively charged frameworks are suitable for selectively encapsulating cationic guest ions via a cation-exchange process. Encapsulating photoactive [RuL₃ ]²⁺ polypyridine complexes into the preorganized mesoscale channels of a MOF is a good method for stabilizing the excited states of the complexes. Three new RuL₃ @InBTB MOFs were prepared by encapsulating cationic [Ru(bpy)₃ ]²⁺ (bpy=2,2'-bipyridine), [Ru(phen)₃ ]²⁺ (phen=1,10-phenanthroline), and [Ru(bpz)₃ ]²⁺ (bpz=2,2'-bipyrazine) into the mesopores of a three-dimensional (3D) InBTB MOF (H₃ BTB=1,3,5-benzenetribenzoic acid). The photophysical properties of the resulting materials were investigated by photoluminescence (PL) analysis. The photoredox catalytic activities were also investigated for the aza-Henry reaction, hydrogenation of dimethyl maleate, and decomposition of methyl orange under visible light irradiation at room temperature. RuL₃ @InBTB MOFs were found to be very stable and highly recyclable photoredox catalytic systems.

Porous Ru(bpy)32+-Linked Polymers for Recyclable Photocatalysis of Enantioselective Alkylation of Aldehydes

Two metal porous organic polymers (POPs) that contain the [Ru(bpy)₃]²⁺ cores are prepared via one-pot Suzuki-Miyaura coupling reactions. Both Ru-POPs are thermally stable at up to 340 °C in air and do not dissolve in all solvents tested. One of the POPs has been revealed to be highly effective and reusable as a heterogeneous photocatalyst for visible light-driven enantioselective alkylation of aldehydes. After 10 cycles, the catalyst still maintains the enantioselectivity, while the activity just decreases slightly.

Conjugated Microporous Polymers as Heterogeneous Photocatalysts for Efficient Degradation of a Mustard-Gas Simulant

Compared with traditional metal-based photosensitizers, heterogeneous and organic photocatalysts with visible-light activity are more environmentally friendly and sustainable. The simultaneous introduction of electron-rich and electron-deficient units in donor-acceptor typed conjugated microporous polymer (CMP) photocatalysts can significantly enhance their visible-light harvesting and separation efficiency of photogenerated carriers. Here, two carbazole-based CMPs (CzBSe-CMP and CzBQn-CMP) were successfully constructed through a cost-effective process. They show inherent porosity with large Brunauer-Emmett-Teller surface area and excellent thermal and chemical stability. Their photoelectric properties, energy levels, optical band gaps, transient photocurrent response, and photocatalytic activity could be conveniently tailored through tuning the electron-deficient moiety in polymer networks. More importantly, CzBSe-CMP was found to be a superior solid photocatalyst for selective photo-oxidation of mustard gas simulant 2-chloroethyl ethyl sulfide into a nontoxic product by using molecular oxygen as a sustainable oxygen source under visible-light illumination. In addition, the obtained CMP-based photocatalysts also showed excellent recyclability and could be reutilized through adding more simulants or a simple separation procedure. The current contribution provides great application prospects for CMPs as metal-free, solid photocatalysts in organic transformation and environmental protection.

Cross-dehydrogenative C(sp3)–C(sp3) coupling via C–H activation using magnetically retrievable ruthenium-based photoredox nanocatalyst under aerobic conditions

A robust, magnetically retrievable photoredox Ru-based heterogeneous nanocatalyst was fabricated for the highly regio-selective synthesis of N-aryl-tetrahydroisoquinoline derivatives.

Photoactive Hybrid Catalysts Based on Natural and Synthetic Polymers: A Comparative Overview

In the present review, we would like to draw the reader's attention to the polymer-based hybrid materials used in photocatalytic processes for efficient degradation of organic pollutants in water. These inorganic-organic materials exhibit unique physicochemical properties due to the synergistic effect originating from the combination of individual elements, i.e., photosensitive metal oxides and polymeric supports. The possibility of merging the structural elements of hybrid materials allows for improving photocatalytic performance through (1) an increase in the light-harvesting ability; (2) a reduction in charge carrier recombination; and (3) prolongation of the photoelectron lifetime. Additionally, the great majority of polymer materials exhibit a high level of resistance against ultraviolet irradiation and improved corrosion resistance. Taking into account that the chemical and environmental stability of the hybrid catalyst depends, to a great extent, on the functional support, we highlight benefits and drawbacks of natural and synthetic polymer-based photocatalytic materials and pay special attention to the fact that the accessibility of synthetic polymeric materials derived from petroleum may be impeded due to decreasing amounts of crude oil. Thus, it is necessary to look for cheap and easily available raw materials like natural polymers that come from, for instance, lignocellulosic wastes or crustacean residues to meet the demand of the "plastic" market.

A Hydrazone-Based Covalent Organic Framework as an Efficient and Reusable Photocatalyst for the Cross-Dehydrogenative Coupling Reaction of N-Aryltetrahydroisoquinolines

A hydrazone-based covalent organic framework (COF) was synthesized by condensation of 2,5-dimethoxyterephthalohydrazide with 1,3,5-triformylbenzene under solvothermal conditions. The COF material exhibits excellent porosity with a BET surface area of up to 1501 m²  g^-1 , high crystallinity, and good thermal and chemical stability. Moreover, it showed efficient photocatalytic activity towards cross-dehydrogenative coupling (CDC) reactions between tetrahydroisoquinolines and nucleophiles such as nitromethane, acetone, and phenylethyl ketone. The metal-free catalytic system also offers attractive advantages including simplicity of operation, wide substrate adaptability, ambient reaction conditions, and robust recycling capability of the catalyst, thus providing a promising platform for highly efficient and reusable photocatalysts.

Visible light mediated cyclization of tertiary anilines with maleimides using a supported iridium complex catalyst

The synthesis of a novel supported iridium complex catalyst and its efficient application in the visible light mediated cyclization of tertiary anilines and maleimides.

The Photocatalyzed Aza-Henry Reaction of N-Aryltetrahydroisoquinolines: Comprehensive Mechanism, H(•)- versus H(+)-Abstraction, and Background Reactions

The cross-dehydrogenative coupling (CDC) reaction of N-aryltetrahydroisoquinolines (THIQ) is one of the most exploited photocatalytic transformation and a test reaction for an exceptional variety of catalysts. However, its mechanism remained unclear concerning involved intermediates, reactive pathways of the amine radical cation and the influence of oxygen and the light source. Therefore, nuclear magnetic resonance (NMR), electron spin resonance (ESR) and synthetic methods were combined to provide a comprehensive picture of the reaction mechanism using Ru(bpy)3Cl2 as a photocatalyst under aerobic and anaerobic conditions. The reaction profiles and involved intermediates were monitored and analyzed by NMR spectroscopy. Several intermediates contributing to product formation were identified, the iminium ion, the hydroperoxide and dimer of THIQ, and a new ring opened intermediate, cleaved at the benzylic C-N bond. Mechanistic evidence is given that under anaerobic conditions preferentially the α-amino radical is formed by deprotonation, in contrast to the formation of iminium ions via H(•)-abstraction in the presence of oxygen. Further, the light-induced background reaction in the absence of the catalyst was studied in detail, revealing that the product formation rate is correlated to the intensity and wavelength of the light source and that oxygen is essential for an efficient conversion. The reaction rate and efficiency is comparable to previously reported photocatalytic systems, performed under aerobic conditions in combination with intense blue light sources. Thus, the multitude of reaction parameters investigated reveals the preference for hydrogen atom or proton abstraction in photoreactions and allows to assess the influence of experimental conditions on the mechanistic pathways.

Porous-Hybrid Polymers as Platforms for Heterogeneous Photochemical Catalysis

A number of permanently porous polymers containing Ru(bpy)n photosensitizer or a cobaloxime complex, as a proton-reduction catalyst, were constructed via one-pot Sonogashira-Hagihara (SH) cross-coupling reactions. This process required minimal workup to access porous platforms with control over the apparent surface area, pore volume, and chemical functionality from suitable molecular building blocks (MBBs) containing the Ru or Co complexes, as rigid and multitopic nodes. The cobaloxime molecular building block, generated through in situ metalation, afforded a microporous solid that demonstrated noticeable catalytic activity toward hydrogen-evolution reaction (HER) with remarkable recyclability. We further demonstrated, in two cases, the ability to affect the excited-state lifetime of the covalently immobilized Ru(bpy)3 complex attained through deliberate utilization of the organic linkers of variable dimensions. Overall, this approach facilitates construction of tunable porous solids, with hybrid composition and pronounced chemical and physical stability, based on the well-known Ru(bpy)nor the cobaloxime complexes.

Reduced Graphene Oxide-Immobilized Tris(bipyridine)ruthenium(II) Complex for Efficient Visible-Light-Driven Reductive Dehalogenation Reaction

A sodium benzenesulfonate (PhSO3Na)-functionalized reduced graphene oxide was synthesized via a two-step aryl diazonium coupling and subsequent NaCl ion-exchange procedure, which was used as a support to immobilize tris(bipyridine)ruthenium(II) complex (Ru(bpy)3Cl2) by coordination reaction. This elaborated Ru(bpy)3-rGO catalyst exhibited excellent catalytic efficiency in visible-light-driven reductive dehalogenation reactions under mild conditions, even for ary chloride. Meanwhile, it showed the comparable reactivity with the corresponding homogeneous Ru(bpy)3Cl2 catalyst. This high catalytic performance could be attributed to the unique two-dimensional sheet-like structure of Ru(bpy)3-rGO, which efficiently diminished diffusion resistance of the reactants. Meanwhile, the nonconjugated PhSO3Na-linkage between Ru(II) complex and the support and the very low electrical conductivity of the catalyst inhibited energy/electron transfer from Ru(II) complex to rGO support, resulting in the decreased support-induced quenching effect. Furthermore, it could be easily recycled at least five times without significant loss of catalytic reactivity.

Site Isolation Leads to Stable Photocatalytic Reduction of CO2 over a Rhenium-Based Catalyst

A porous organic polymer incorporating [(α-diimine)Re(CO)3Cl] moieties was produced and tested in the photocatalytic reduction of CO2, with NEt3 as a sacrificial donor. The catalyst generated both H2 and CO, although the Re moiety was not required for H2 generation. After an induction period, the Re-containing porous organic polymer produced CO at a stable rate, unless soluble [(bpy)Re(CO)3Cl] (bpy=2,2'-bipyridine) was added. This provides the strongest evidence to date that [(α-diimine)Re(CO)3Cl] catalysts for photocatalytic CO2 reduction decompose through a bimetallic pathway.

Synthesis of cross-linked polymers via multi-component Passerini reaction and their application as efficient photocatalysts

Cross-linked polymers containing Ru complexes synthesized via multi-component Passerini reaction were shown to be highly effective and recyclable heterogeneous photocatalysts.

Nanobiocatalytic assemblies for artificial photosynthesis

Natural photosynthesis, a solar-to-chemical energy conversion process, occurs through a series of photo-induced electron transfer reactions in nanoscale architectures that contain light-harvesting complexes, protein-metal clusters, and many redox biocatalysts. Artificial photosynthesis in nanobiocatalytic assemblies aims to reconstruct man-made photosensitizers, electron mediators, electron donors, and redox enzymes for solar synthesis of valuable chemicals through visible light-driven cofactor regeneration. The key requirement in the design of biocatalyzed artificial photosynthetic process is an efficient and forward electron transfer between each photosynthetic component. This review describes basic principles in combining redox biocatalysis with photocatalysis, and highlights recent research outcomes in the development of nanobiocatalytic assemblies that can mimic natural photosystems I and II, respectively. Current issues in biocatalyzed artificial photosynthesis and future perspectives will be briefly discussed.

Core cross-linked micelle-based nanoreactors for efficient photocatalysis

Stable nanoscale cross-linked polymer micelles containing Ru complexes (Ru-CMs) were prepared from monomethoxy[poly(ethylene glycol)]-block-poly(L-lysine) (MPEG-PLys) and [(bpy)2Ru(fmbpy)](PF6)2 (bpy=bipyridine, fmbpy=5-formy-5'-methyl-2,2'-bipyridine). To stabilize the micelles, bifunctional glutaraldehyde was used as a cross-linker to react with the free amino groups of the PLys block. After that, the Ru-CMs showed very good stability in common solvents. The Ru-CMs showed photocatalytic activity and selectivity in the oxidation of sulfides that were as high as those of the well-known [Ru(bpy)3(PF6)2] complex, because the micelles were swollen in the methanol-sulfide mixture. Moreover, because of the nanoscale size of the particles and their high stability, the Ru-CM photocatalysts can be readily recovered by ultrafiltration and reused without loss of photocatalytic activity. This work highlights the potential of using cross-linked micelles as a platform for developing highly efficient heterogeneous photocatalysts for a number of important organic transformations.