Role of gold nanoparticles capping density on stability and surface reactivity to design drug delivery platforms

Cell reprogramming therapy for Parkinson's disease

Parkinson's disease is typically characterized by the progressive loss of dopaminergic neurons in the substantia nigra pars compacta. Many studies have been performed based on the supplementation of lost dopaminergic neurons to treat Parkinson's disease. The initial strategy for cell replacement therapy used human fetal ventral midbrain and human embryonic stem cells to treat Parkinson's disease, which could substantially alleviate the symptoms of Parkinson's disease in clinical practice. However, ethical issues and tumor formation were limitations of its clinical application. Induced pluripotent stem cells can be acquired without sacrificing human embryos, which eliminates the huge ethical barriers of human stem cell therapy. Another widely considered neuronal regeneration strategy is to directly reprogram fibroblasts and astrocytes into neurons, without the need for intermediate proliferation states, thus avoiding issues of immune rejection and tumor formation. Both induced pluripotent stem cells and direct reprogramming of lineage cells have shown promising results in the treatment of Parkinson's disease. However, there are also ethical concerns and the risk of tumor formation that need to be addressed. This review highlights the current application status of cell reprogramming in the treatment of Parkinson's disease, focusing on the use of induced pluripotent stem cells in cell replacement therapy, including preclinical animal models and progress in clinical research. The review also discusses the advancements in direct reprogramming of lineage cells in the treatment of Parkinson's disease, as well as the controversy surrounding in vivo reprogramming. These findings suggest that cell reprogramming may hold great promise as a potential strategy for treating Parkinson's disease.

Structure-dependent detection of polyphenols using crown ether-immobilized gold nanoparticles

Gold nanoparticles functionalized with 18-crown 6-ether (18C6-AuNPs) can be used for detection of tannic acid, epigallocatechin gallate, and epicatechin gallate by color change in the μg mL-1 range. 18C6-AuNPs were insensitive to l-ascorbic acid and l-tyrosine unlike conventional detection methods, such as Folin & Ciocalteu assay, whose principle is based on the redox reaction of polyphenols. Although 18C6-AuNPs did not respond to some polyphenols, such as gallic acid and epicatechin, if the polyphenols of interest are responsive to this approach, these are expected to be effective nanomaterial for simple sensing of polyphenols.

Inorganic Nanoparticles: Tools to Emphasize the Janus Face of Amphotericin B

Amphotericin B is the oldest antifungal molecule which is still currently widely used in clinical practice, in particular for the treatment of invasive diseases, even though it is not devoid of side effects (particularly nephrotoxicity). Recently, its redox properties (i.e., both prooxidant and antioxidant) have been highlighted in the literature as mechanisms involved in both its activity and its toxicity. Interestingly, similar properties can be described for inorganic nanoparticles. In the first part of the present review, the redox properties of Amphotericin B and inorganic nanoparticles are discussed. Then, in the second part, inorganic nanoparticles as carriers of the drug are described. A special emphasis is given to their combined redox properties acting either as a prooxidant or as an antioxidant and their connection to the activity against pathogens (i.e., fungi, parasites, and yeasts) and to their toxicity. In a majority of the published studies, inorganic nanoparticles carrying Amphotericin B are described as having a synergistic activity directly related to the rupture of the redox homeostasis of the pathogen. Due to the unique properties of inorganic nanoparticles (e.g., magnetism, intrinsic anti-infectious properties, stimuli-triggered responses, etc.), these nanomaterials may represent a new generation of medicine that can synergistically enhance the antimicrobial properties of Amphotericin B.

Gene Therapy Using Efficient Direct Lineage Reprogramming Technology for Neurological Diseases

Gene therapy is an innovative approach in the field of regenerative medicine. This therapy entails the transfer of genetic material into a patient's cells to treat diseases. In particular, gene therapy for neurological diseases has recently achieved significant progress, with numerous studies investigating the use of adeno-associated viruses for the targeted delivery of therapeutic genetic fragments. This approach has potential applications for treating incurable diseases, including paralysis and motor impairment caused by spinal cord injury and Parkinson's disease, and it is characterized by dopaminergic neuron degeneration. Recently, several studies have explored the potential of direct lineage reprogramming (DLR) for treating incurable diseases, and highlighted the advantages of DLR over conventional stem cell therapy. However, application of DLR technology in clinical practice is hindered by its low efficiency compared with cell therapy using stem cell differentiation. To overcome this limitation, researchers have explored various strategies such as the efficiency of DLR. In this study, we focused on innovative strategies, including the use of a nanoporous particle-based gene delivery system to improve the reprogramming efficiency of DLR-induced neurons. We believe that discussing these approaches can facilitate the development of more effective gene therapies for neurological disorders.

Computational study of therapeutic potential of phosphorene as a nano-carrier for drug delivery of nebivolol for the prohibition of cardiovascular diseases: a DFT study

Density functional theory (DFT) calculations were utilized to assess the drug delivery efficiency of phosphorene carrier for nebivolol drug to treat cardiovascular diseases. The optimized structures, excited state, and electronic properties of nebivolol, phosphorene, and nebivolol-phosphorene (nebivolol-PH) complex were considered to determine the drug delivery ability of phosphorene at the target site. The increased dipole moment (6.08 D) results in the higher solubility of the complex in polar solvents (water). Weak interactive forces between nebivolol and phosphorene were demonstrated by the non-covalent interaction (NCI) plot that facilitated the offloading of nebivolol at the targeted area. The analysis of frontier molecular orbitals (FMOs) revealed that during excitation, the charge was transferred from nebivolol as a higher occupied molecular orbital (HOMO) to phosphorene as a lower unoccupied molecular orbital (LUMO). Thus, the charge-transfer process was further studied by charge decomposition analysis (CDA). The calculated results at the excited state for the nebivolol-PH complex exhibited that the maximum wavelength (λmax) was red-shifted by 6 nm in the gas phase. The electron-hole theory and photoinduced electron transfer (PET) processes were carried out for the exploration of different excited states of the complex. Additionally, phosphorene with + 1 and - 1 charge states indicated the minor structural changes and provide the stable nebivolol-PH complex. This theoretical study also investigated that phosphorene can be exploited as an effective carrier for the delivery of a therapeutic agent as nebivolol to treat cardiovascular diseases. This work will also encourage the researchers to investigate the other 2D nanoparticles as a nano-drug delivery system (NDDS).

High Stability Au NPs: From Design to Application in Nanomedicine

In recent years, Au-based nanomaterials are widely used in nanomedicine and biosensors due to their excellent physical and chemical properties. However, these applications require Au NPs to have excellent stability in different environments, such as extreme pH, high temperature, high concentration ions, and various biomatrix. To meet the requirement of multiple applications, many synthetic substances and natural products are used to prepare highly stable Au NPs. Because of this, we aim at offering an update comprehensive summary of preparation high stability Au NPs. In addition, we discuss its application in nanomedicine. The contents of this review are based on a balanced combination of our studies and selected research studies done by worldwide academic groups. First, we address some critical methods for preparing highly stable Au NPs using polymers, including heterocyclic substances, polyethylene glycols, amines, and thiol, then pay attention to natural product progress Au NPs. Then, we sum up the stability of various Au NPs in different stored times, ions solution, pH, temperature, and biomatrix. Finally, the application of Au NPs in nanomedicine, such as drug delivery, bioimaging, photothermal therapy (PTT), clinical diagnosis, nanozyme, and radiotherapy (RT), was addressed concentratedly.

Analytical strategy for studying the formation and stability of multilayered films containing gold nanoparticles

The design of layer-by-layer (LbL) polyelectrolyte films including nanoparticles is a growing field of innovation in a wide range of biomedical applications. Gold nanoparticles (AuNPs) are very attractive for further biomolecule coupling to induce a pharmacological effect. Nanostructured LbL films coupled with such metallic species show properties that depend on the conditions of construction, i.e. the polymer nature and dissolution buffer. Tripartite LbL films (polycation, AuNP, and polyanion) were evaluated using two different polycationic polymers (poly(allylamine hydrochloride) (PAH), poly(ethylene imine) (PEI)) and various medium conditions (salts, i.e. phosphate, Tris or Tris-NaCl buffers, and concentration). AuNP incorporation and film stability were analysed by visible spectrophotometry, capillary zone electrophoresis, a quartz crystal microbalance, and high-performance liquid chromatography. The ideal compromise between AuNP loading and film stability was obtained using PAH prepared in Tris-NaCl buffer (0.01-0.15 M). This condition allowed the formation of a LbL film that was more stable than the film with PEI and provided an AuNP quantity that was 4.8 times greater than that of the PAH-PBS-built film. In conclusion, this work presents an analytical strategy for the characterization of nanostructured multilayer films and optimization of LbL films enriched with AuNPs to design biomedical device coatings.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Design of surface ligands for blood compatible gold nanoparticles: Effect of charge and binding energy

Gold nanoparticle (AuNP) interaction with the blood compartment as a function of their charge and the binding energy of their surface ligand was explored. Citrate, polyallylamine and cysteamine stabilized AuNP along with dihydrolipoic acid and polyethylene glycol capped AuNP were synthesized and fully characterized. Their interactions with model proteins (human albumin and human fibrinogen) were studied. Complexes formed between AuNP and protein revealed several behaviors ranging from corona formation to aggregation. Protein fluorescence quenching as a function of temperature and AuNP concentration allowed the determination of the thermodynamic parameters describing these interactions. The hemolysis induced by AuNP was also probed: an increasing or a decreasing of hemolysis ratio induced by AuNP was observed as of function of protein corona formation. Taken together, our results drew up a composite sketch of an ideal surface ligand for blood compatible AuNP. This capping agent should be strongly bound to the gold core by one or more thiol groups and it must confer a negative charge to the particles.

Understanding the Thermodynamic Mechanisms Leading to the Binding of Albumin to Lipid Nanocapsules

Lipid nanocapsules (LNCs) are drug delivery platforms designed for different administration routes including intravenous delivery. Nanocarrier binding with plasma proteins such as albumin is an important factor that influences the pharmacokinetics of the drug and the drug delivery system. The aim of this paper was to characterize LNCs with different surface compositions and hydrophobicities to study their interactions with albumin: binary LNCs [oil-glyceryl trioctanoate (TG) and PEGylated surfactant macrogol 15-hydroxystearate (MHS)] and ternary LNCs (TG, MHS, and Span 80). Span was found to stabilize and decrease the LNC size. The formation of a stable LNC/albumin complex in the ground state was demonstrated. Thermodynamic parameters indicated that complex formation was exothermic and spontaneous, and the interactions involved van der Waals forces and hydrogen bond formation. Ternary LNCs showed higher affinity for albumin than did binary LNCs (affinity constant 10-fold higher). This study is the first report on the thermodynamic mechanisms that lead to the formation of a complex between albumin and organic nanoparticles with different surface architectures.

Evaluation of cytotoxic activity of docetaxel loaded gold nanoparticles for lung cancer drug delivery

The effective use of the gold nanoparticle (AuNPs) conjugated drugs for targeted drug delivery applications is one of the most promising research areas in the field of cancer. Herein, we aimed to establish a nano drug conjugated with docetaxel as a possible therapy option. Gold nanoparticles were synthesized by chemical reduction method. This is followed by the conjugation with an anticancer drug, docetaxel (Dtx) by a non-covalent method and folic acid (FA) was conjugated by a covalent method. The physicochemical characteristics of the synthesized AuNPs, Dtx and FA were studied by various analytical techniques such as UV-vis spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FE-SEM) high-resolution transmission electron microscope (HR-TEM) and energy dispersive X-ray spectroscopy (EDS). The surface morphology and microstructure of the synthesized AuNPs and gold conjugates (AuNPs-Dtx-FA) were examined by FESEM and HR-TEM. The average size of the spherical shaped AuNPs was observed in the range of 5-18 nm. XPS and EDS spectra were examined the oxidation state and chemical composition of the synthesized nanoparticles. The cytotoxicity of the synthesized AuNPs nano-conjugates was evaluated by in-vitro studies against lung cancer cell line (H520). The chemical reduction method followed here in the development of AuNPs is a simple and one-step process, which exhibits the excellent binding specificity, biocompatibility and feasible for the large scale up process of the AuNPs.

Atmospheric Pressure Plasma-Synthesized Gold Nanoparticle/Carbon Nanotube Hybrids for Photothermal Conversion

In this work, a room-temperature atmospheric pressure direct-current plasma has been deployed for the one-step synthesis of gold nanoparticle/carboxyl group-functionalized carbon nanotube (AuNP/CNT-COOH) nanohybrids in aqueous solution for the first time. Uniformly distributed AuNPs are formed on the surface of CNT-COOH, without the use of reducing agents or surfactants. The size of the AuNP can be tuned by changing the gold salt precursor concentration. UV-vis, ζ-potential, and X-ray photoelectron spectroscopy suggest that carboxyl surface functional groups on CNTs served as nucleation and growth sites for AuNPs and the multiple potential reaction pathways induced by the plasma chemistry have been elucidated in detail. The nanohybrids exhibit significantly enhanced Raman scattering and photothermal conversion efficiency that are essential for potential multimodal cancer treatment applications.

Set of Highly Stable Amine- and Carboxylate-Terminated Dendronized Au Nanoparticles with Dense Coating and Nontoxic Mixed-Dendronized Form

The synthesis of a novel poly(propyleneimine) (PPI) dendron in gram scale as well as its use in the formation of a highly stable, dendronized gold nanoparticle (AuNP)-based drug delivery platform is described herein. The AuNP-based platform is composed of three complementary parts: (i) a 15 nm AuNP core, (ii) a heterofunctional thioctic acid-terminated tetraethylene glycol spacer, and (iii) a third-generation PPI dendron with a unique protonation profile and diverse end-group functionalization that allows for further derivatization. The prepared dendronized AuNPs are able to withstand several rounds of lyophilization cycles with no sign of aggregation, are stable in phosphate-buffered saline and Hanks' buffer as well as in serum, and are resistant to degradation by glutathione exchange reactions. This nanocarrier platform displays a dense coating, with >1400 dendrons/AuNPs, which will enable very high payload. Furthermore, while amine-terminated AuNPs expectedly showed cytotoxicity against the MCF-7 breast cancer cell line from a NP concentration of 1 nM, the mixed monolayer AuNPs (coated with 40/60 amine/carboxylate dendrons) interestingly did not exhibit any sign of toxicity at concentrations as high as 15 nM, similar to the carboxylate-terminated AuNPs. The described dendronized AuNPs address the current practical need for a stable NP-based drug delivery platform which is scalable and easily conjugable, has long-term stability in solution, and can be conveniently formulated as a powder and redispersed in desired buffer or serum.

Glutathione: Antioxidant Properties Dedicated to Nanotechnologies

Which scientist has never heard of glutathione (GSH)? This well-known low-molecular-weight tripeptide is perhaps the most famous natural antioxidant. However, the interest in GSH should not be restricted to its redox properties. This multidisciplinary review aims to bring out some lesser-known aspects of GSH, for example, as an emerging tool in nanotechnologies to achieve targeted drug delivery. After recalling the biochemistry of GSH, including its metabolism pathways and redox properties, its involvement in cellular redox homeostasis and signaling is described. Analytical methods for the dosage and localization of GSH or glutathiolated proteins are also covered. Finally, the various therapeutic strategies to replenish GSH stocks are discussed, in parallel with its use as an addressing molecule in drug delivery.

Simulation studies on structural and thermal properties of alkane thiol capped gold nanoparticles

The structural and thermal properties of the passivated gold nanoparticles were explored employing molecular dynamics simulation for the different surface coverage densities of the self-assembled monolayer (SAM) of alkane thiol. The structural properties of the monolayer protected gold nanoparticles such us overall shape, organization and conformation of the capping alkane thiol chains were found to be influenced by the capping density. The structural order of the thiol capped gold nanoparticles enhances with the increase in the surface coverage density. The specific heat capacity of the alkane thiol capped gold nanoparticles was found to increase linearly with the thiol coverage density. This may be attributed to the enhancement in the lattice vibrational energy. The present simulation results suggest, that the structural and thermal properties of the alkane thiol capped gold nanoparticles may be modified by the suitable selection of the SAM coverage density.

Stability, cytotoxicity and cell uptake of water-soluble dendron-conjugated gold nanoparticles with 3, 12 and 17 nm cores

This article describes the synthesis of water-soluble dendron-conjugated gold nanoparticles (Den-AuNPs) with various average core sizes and the evaluation of stability, cytotoxicity, cell permeability and uptake of these materials. The characterization of Den-AuNPs using various techniques including transmission electron microscopy (TEM), matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF-MS), 1H NMR, FT-IR, and UV-vis spectroscopy confirms the dendron conjugation to the glutathione-capped gold nanoparticles (AuNPs). The stability of AuNPs and Den-AuNPs in solutions of different pH and salt concentration is determined by monitoring the changes in surface plasmon bands of gold using UV-vis spectroscopy. The stability of Den-AuNPs at different pH remained about the same compared to that of AuNPs. In comparison, the Den-AuNPs are found to be more stable than the precursor AuNPs maintaining their solubility in the aqueous solution with the salt concentration of up to 100 mM. The improved stability of Den-AuNPs suggests that the post-functionalization of thiol-capped gold nanoparticle surfaces with dendrons can further improve the physiological stability and biocompatibility of gold nanoparticle-based materials. Cytotoxicity studies of AuNPs and Den-AuNPs with and without fluorophores are also performed by examining cell viability for 3T3 fibroblasts using a MTT cell proliferation assay. The conjugation of dendrons to the AuNPs with a fluorophore is able to decrease the cytotoxicity brought about by the fluorophore. The successful uptake of Den-AuNPs in mouse fibroblast 3T3 cells shows the physiological viability of the hybrid materials.

Adsorption of linear aliphatic α,ω-dithiols on plasmonic metal nanoparticles: a structural study based on surface-enhanced Raman spectra

The adsorption mechanism of linear aliphatic α,ω-dithiols with chain lengths of 6, 8 and 10 carbon atoms on silver and gold nanoparticles has been studied by surface-enhanced Raman scattering (SERS) spectroscopy.

Understanding the self-assembly of proteins onto gold nanoparticles and quantum dots driven by metal-histidine coordination

Coupling of polyhistidine-appended biomolecules to inorganic nanocrystals driven by metal-affinity interactions is a greatly promising strategy to form hybrid bioconjugates. It is simple to implement and can take advantage of the fact that polyhistidine-appended proteins and peptides are routinely prepared using well established molecular engineering techniques. A few groups have shown its effectiveness for coupling proteins onto Zn- or Cd-rich semiconductor quantum dots (QDs). Expanding this conjugation scheme to other metal-rich nanoparticles (NPs) such as AuNPs would be of great interest to researchers actively seeking effective means for interfacing nanostructured materials with biology. In this report, we investigated the metal-affinity driven self-assembly between AuNPs and two engineered proteins, a His7-appended maltose binding protein (MBP-His) and a fluorescent His6-terminated mCherry protein. In particular, we investigated the influence of the capping ligand affinity to the nanoparticle surface, its density, and its lateral extension on the AuNP-protein self-assembly. Affinity gel chromatography was used to test the AuNP-MPB-His7 self-assembly, while NP-to-mCherry-His6 binding was evaluated using fluorescence measurements. We also assessed the kinetics of the self-assembly between AuNPs and proteins in solution, using time-dependent changes in the energy transfer quenching of mCherry fluorescent proteins as they immobilize onto the AuNP surface. This allowed determination of the dissociation rate constant, Kd(-1) ∼ 1-5 nM. Furthermore, a close comparison of the protein self-assembly onto AuNPs or QDs provided additional insights into which parameters control the interactions between imidazoles and metal ions in these systems.

Pitfalls of assays devoted to evaluation of oxidative stress induced by inorganic nanoparticles

During the last years, there has been a remarkable increase in the use of inorganic nanoparticles (NP) in different applications, including consumer and medical products. Despite these promising applications, the extremely small size of NP allows them to penetrate cells, in which they can interact with intracellular structures causing serious side effects. A number of studies showed that NP cause adverse effects predominantly via induction of an oxidative stress - an imbalance between damaging oxidants and protective antioxidants - resulting in inflammation, immune response, cell damages, genotoxicity, etc … Most of the in vitro methods used for measurement of oxidative stress biomarkers were designed and standardized for conventional organic, inorganic and biochemical compounds. More recently, these methods have been adapted to studies related to various nanomaterials. Thus, this review is an attempt to highlight some current methods employed in and to provide a critical analysis of the major challenges and issues faced in this emerging field.