Topography and coating of platinum improve the electrochemical properties and neuronal guidance

Development of Neuronal Guidance Fibers for Stimulating Electrodes: Basic Construction and Delivery of a Growth Factor

State-of-the-art treatment for sensorineural hearing loss is based on electrical stimulation of residual spiral ganglion neurons (SGNs) with cochlear implants (CIs). Due to the anatomical gap between the electrode contacts of the CI and the residual afferent fibers of the SGNs, spatial spreading of the stimulation signal hampers focused neuronal stimulation. Also, the efficiency of a CI is limited because SGNs degenerate over time due to loss of trophic support. A promising option to close the anatomical gap is to install fibers as artificial nerve guidance structures on the surface of the implant and install on these fibers drug delivery systems releasing neuroprotective agents. Here, we describe the first steps in this direction. In the present study, suture yarns made of biodegradable polymers (polyglycolide/poly-ε-caprolactone) serve as the basic fiber material. In addition to the unmodified fiber, also fibers modified with amine groups were employed. Cell culture investigations with NIH 3T3 fibroblasts attested good cytocompatibility to both types of fibers. The fibers were then coated with the extracellular matrix component heparan sulfate (HS) as a biomimetic of the extracellular matrix. HS is known to bind, stabilize, modulate, and sustainably release growth factors. Here, we loaded the HS-carrying fibers with the brain-derived neurotrophic factor (BDNF) which is known to act neuroprotectively. Release of this neurotrophic factor from the fibers was followed over a period of 110 days. Cell culture investigations with spiral ganglion cells, using the supernatants from the release studies, showed that the BDNF delivered from the fibers drastically increased the survival rate of SGNs in vitro. Thus, biodegradable polymer fibers with attached HS and loaded with BDNF are suitable for the protection and support of SGNs. Moreover, they present a promising base material for the further development towards a future neuronal guiding scaffold.

A Simple Way to Achieve Self-Cleaning Surfaces with Unique Antifouling Property

Self-cleaning surfaces may have wide applications such as microfluidic devices, lab-on-a-chip, sensors, microreactors, air purification, and antimicrobial fields. In this article, by using a combination of femtosecond (fs) laser irradiation and fluorination technique, self-cleaning stainless steel surfaces with unique antifouling property were obtained. New insight is developed through a detailed analysis of the antifouling behavior of the self-cleaning surfaces. The surface free energy and its polar and disperse components were calculated by using the Owens–Wendt-–Rabel–Kaelble (OWRK) method. X-ray photoelectron spectroscopy was employed to analyse the surface elemental compositions and functional groups. The antifouling property of the surface was recorded by using a high speed camera. Water sliding angles (SAs) were reduced by fluorination treatment, resulting in low adhesive superhydrophobic surfaces with the self-cleaning property. The influences of micro/nanostructures, fluorination, and their combination on the surface free energy were investigated. The interaction process between water droplets and pollutants (inorganic and organic particles) on the treated surface was explored. The antifouling property of an optimized specimen (CA = 162° and SA = 1°) was tested and compared with the untreated sample.

Roles of electrical stimulation in promoting osteogenic differentiation of BMSCs on conductive fibers

The strategy of using conductive materials in regenerating bone defects is attractive, benefiting from the bioelectricity feature of natural bone tissues. Thereby, POP conductive fibers were fabricated by coating polypyrrole (PPY) onto electrospun poly(l-lactide) (PLLA) fibers, and their potentials in promoting osteogenic differentiation of bone mesenchymal stromal cells (BMSCs) were investigated. Different from the smooth-surfaced PLLA fibers, POP fibers were rough-surfaced and favorable for protein adsorption and mineralization nucleation. When electrical stimulation (ES) was applied, the surface charges on the conductive POP fibers further promoted the protein adsorption and the mineral deposition, while the non-conductive PLLA fibers displayed no such promotion. When BMSCs were cultured on these fibers, strong cell viability was detected, indicating their good biocompatibility and cell affinity. In osteogenic differentiation studies, BMSCs demonstrated the strongest ability in differentiating toward osteoblasts when they were cultured on the POP fibers under ES, followed by the case without ES. In comparison with the conductive POP fibers, the non-conductive PLLA fibers displayed significantly weaker ability in inducing the osteogenic differentiation of BMSCs with ES being applied or not. Alongside the differentiation, both the calcium deposition on BMSC/material complexes and the intracellular Ca²⁺ concentration were identified the most abundant when BMSCs grew on the POP fibers under ES. These findings suggested that the surface charges of conductive fibers played roles in regulating protein adsorption, ion migration and nucleation, particularly under ES, which contributed much to the increased intracellular Ca²⁺ ions, and thus accelerated the osteogenic differentiation of the seeded cells. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Photoconductive Micro/Nanoscale Interfaces of a Semiconducting Polymer for Wireless Stimulation of Neuron-Like Cells

We report multiscale structured fibers and patterned films based on a semiconducting polymer, poly(3-hexylthiophene) (P3HT), as photoconductive biointerfaces to promote neuronal stimulation upon light irradiation. The micro/nanoscale structures of P3HT used for neuronal interfacing and stimulation include nanofibers with an average diameter of 100 nm, microfibers with an average diameter of about 1 μm, and lithographically patterned stripes with width of 3, 25, and 50 μm, respectively. The photoconductive effect of P3HT upon light irradiation provides electrical stimulation for neuronal differentiation and directed growth. Our results demonstrate that neurons on P3HT nanofibers showed a significantly higher total number of branches, while neurons grown on P3HT microfibers had longer and thinner neurites. Such a combination strategy of topographical and photoconductive stimulation can be applied to further enhance neuronal differentiation and directed growth. These photoconductive polymeric micro/nanostructures demonstrated their great potential for neural engineering and development of novel neural regenerative devices.

Study of Electrical Stimulation with Different Electric-Field Intensities in the Regulation of the Differentiation of PC12 Cells

The strategy of using electrical stimulation (ES) to promote the neural differentiation and regeneration of injured nerves is proven feasible. Study of the possible molecular mechanisms in relation to this ES promotion effect should be helpful for understanding the phenomenon. In this study, it was identified that the neuronal differentiation of PC12 cells was enhanced when the electric field intensity was in the range of 30-80 mV/mm, and a lower or higher electric-field intensity displayed inferior effects. Under ES, however, levels of intracellular reactive oxygen species (ROS), intracellular Ca²⁺ dynamics, and expression of TREK-1 were measured as being gradually increasing alongside higher electric-field intensity. In trying to understand the relationship between the ES enhancement on differentiation and these variations in cell activities, parallel experiments were conducted by introducing exogeneous H₂O₂ into culture systems at different concentrations. Similarly, the effects of H₂O₂ concentration on the neuronal differentiation of PC12 cells, intracellular ROS and Ca²⁺ levels, and TREK-1 expression were systematically characterized. In comparative studies, it was found in two cases that ES of 50 mV/mm for 2 h/day and H₂O₂ of 5 μM in culture medium shared comparable results for intracellular ROS and Ca²⁺ levels and TREK-1 expression. Higher H₂O₂ concentrations (e.g., 10 and 20 μM) demonstrated adverse effects on cell differentiation and caused DNA damage. A stronger ES (e.g., 100 mV/mm), being associated with a higher intracellular ROS level, also resulted in weaker enhancement of the neuronal differentiation of PC12 cells. These facts suggested that the intracellular ROS generated under ES might be an intermediate signal transducer involved in cascade reactions relative to cell differentiation.

Distinct Mechanosensing of Human Neural Stem Cells on Extremely Limited Anisotropic Cellular Contact

Human neural stem cells (hNSCs) can alter their fate choice in response to the biophysical cues provided during development. In particular, it has been reported that the differentiation of neural stem cells (NSCs) is enhanced by anisotropic contact, which facilitates focal adhesion (FA) formation and cytoskeletal organization. However, a biomolecular mechanism governing how the cells process the biophysical cues from these anisotropic geometries to their fate commitment is still poorly understood due to the limited availability of geometrical diversities (contact width above 50 nm) applicable to cell studies. Here, we firstly demonstrate that the biomolecular mechanism for enhanced neurogenesis on an anisotropic nanostructure is critically dependent on the resolution of a contact feature. We observed a totally different cellular response to anisotropic geometries by first utilizing a high-resolution nanogroove (HRN) structure with an extremely narrow contact width (15 nm). The width scale is sufficiently low to suppress the integrin clustering and enable us to elucidate how the contact area influences the neurogenesis of hNSCs at an aligned state. Both the HRN and control nanogroove (CN) pattern with a contact width of 1 μm induced the spontaneous topographic alignment of hNSCs. However, intriguingly, the focal adhesion (FA) formation and cytoskeletal reorganization were substantially limited on the HRN, although the cells on the CN showed enhanced FA formation compared with flat surfaces. In particular, the hNSCs on the HRN surface exhibited a strikingly lower fraction of nuclear yes-associated protein (YAP) than on the CN surface, which was turned out to be regulated by Rho GTPase in the same way as the cells sense the mechanical properties of the environment. Considering the previously reported role of YAP on neurogenesis, our finding newly substantiates that YAP and Rho GTPase also can be transducers of hNSCs to process topographical alternation to fate decision. Furthermore, this study with the unprecedented high-resolution nanostructure suggests a novel geometry sensing model where the functional crosstalk between YAP signaling and Rho GTPase integrally regulate the fate commitment of the hNSCs.

Biomaterials and computation: a strategic alliance to investigate emergent responses of neural cells

Synergistic use of biomaterials and computation allows to identify and unravel neural cell responses.

A silicone fiber coating as approach for the reduction of fibroblast growth on implant electrodes

In cochlear implant (CI) patients, an increase in electrode impedance due to fibrotic encapsulation is frequently observed. Several attempts have been proposed to reduce fibroblast growth at the electrode contacts, but none proved to be satisfactory so far. Here, a silicone fiber coating of the electrode contacts is presented that provides a complex micro-scale surface topography and increases hydrophobicity to inhibit fibroblast growth and adhesion. A silicone fiber electrospinning process was developed to create a thin and porous fiber mesh. Fiber coatings were applied on graphite specimen holders, glass cover slips and CI electrode contacts. For characterization of the coating's pore distribution, water contact angle and electrical impedance were analyzed. Cytotoxicity and in vitro fibroblast growth were evaluated to assess biological efficacy of the coatings. It could be shown that the silicone fiber mesh itself had only minor influence on electrode impedance. A uniform, hydrophobic fiber coating could be achieved that decreased fibroblast growth without showing toxic effects. Finally, CI electrode contacts were successfully coated in order to present this promising approach for a long-term improvement of CI electrodes. We are one of the first groups that could successfully adapt the electrospinning technique on the utilization of silicone. Silicone was chosen because of its high hydrophobicity, chemical stability and excellent biocompatibility and as it is one of the biomaterials already used in CIs. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2574-2580, 2017.

Intracellular calcium and cyclic nucleotide levels modulate neurite guidance by microtopographical substrate features

Micro- and nanoscale surface features have emerged as potential tools to direct neurite growth into close proximity with next generation neural prosthesis electrodes. However, the signaling events underlying the ability of growth cones to respond to topographical features remain largely unknown. Accordingly, this study probes the influence of [Ca(2+) ]i and cyclic nucleotide levels on the ability of neurites from spiral ganglion neurons (SGNs) to precisely track topographical micropatterns. Photopolymerization and photomasking were used to generate micropatterned methacrylate polymer substrates. Dissociated SGN cultures were plated on the micropatterned surfaces. Calcium influx and release from internal stores were manipulated by elevating extracellular K(+) , maintenance in calcium-free media, or bath application of various calcium channel blockers. Cyclic nucleotide activity was increased by application of cpt-cAMP or 8-Br-cGMP. Elevation of [Ca(2+) ]i by treatment of cultures with elevated potassium reduced neurite alignment to physical microfeatures. Maintenance of cultures in Ca(2+) -free medium or treatment with the non-selective voltage-gated calcium channel blocker cadmium or L-type Ca(2+) channel blocker nifedipine did not signficantly alter SGN neurite alignment. By contrast, ryanodine or xestospongin C, which block release of internal calcium stores via ryanodine-sensitive channels or inositol-1,4,5-trisphosphate receptors respectively, each significantly decreased neurite alignment. Cpt-cAMP significantly reduced neurite alignment while 8-Br-cGMP significantly enhanced neurite alignment. Manipulation of [Ca(2+) ]i or cAMP levels significantly disrupts neurite guidance while elevation of cGMP levels increases neurite alignment. The results suggest intracellular signaling pathways similar to those recruited by chemotactic cues are involved in neurite guidance by topographical features. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2037-2048, 2016.

Conductive hybrid carbon nanotube (CNT)–polythiophene coatings for innovative auditory neuron-multi-electrode array interfacing

Surface modification of platinum electrodes to improve neuron-electrode interface and electrode conductive properties in cochlear implants.

Microtopographical features generated by photopolymerization recruit RhoA/ROCK through TRPV1 to direct cell and neurite growth

Cell processes, including growth cones, respond to biophysical cues in their microenvironment to establish functional tissue architecture and intercellular networks. The mechanisms by which cells sense and translate biophysical cues into directed growth are unknown. We used photopolymerization to fabricate methacrylate platforms with patterned microtopographical features that precisely guide neurite growth and Schwann cell alignment. Pharmacologic inhibition of the transient receptor potential cation channel subfamily V member 1 (TRPV1) or reduced expression of TRPV1 by RNAi significantly disrupts neurite guidance by these microtopographical features. Exogenous expression of TRPV1 induces alignment of NIH3T3 fibroblasts that fail to align in the absence of TRPV1, further implicating TRPV1 channels as critical mediators of cellular responses to biophysical cues. Microtopographic features increase RhoA activity in growth cones and in TRPV1-expressing NIH3T3 cells. Further, Rho-associated kinase (ROCK) phosphorylation is elevated in growth cones and neurites on micropatterned surfaces. Inhibition of RhoA/ROCK by pharmacological compounds or reduced expression of either ROCKI or ROCKII isoforms by RNAi abolishes neurite and cell alignment, confirming that RhoA/ROCK signaling mediates neurite and cell alignment to microtopographic features. These studies demonstrate that microtopographical cues recruit TRPV1 channels and downstream signaling pathways, including RhoA and ROCK, to direct neurite and cell growth.

Impact of laser-structured biomaterial interfaces on guided cell responses

To achieve a perfect integration of biomaterials into the body, tissue formation in contact with the interface has to be controlled. In this connection, a selective cell control is required: fibrotic encapsulation has to be inhibited, while tissue guidance has to be stimulated. As conventional biomaterials do not fulfil this specification, functionalization of the biointerface is under development to mimic the natural environment of the cells. One approach focuses on the fabrication of defined surface topographies. Thereby, ultrashort pulse laser ablation is very beneficial, owing to a large variety of fabricated structures, reduced heat-affected zones, high precision and reproducibility. We demonstrate that nanostructures in platinum and microstructures in silicon selectively control cell behaviour: inhibiting fibroblasts, while stimulating neuronal attachment and differentiation. However, the control of fibroblasts strongly correlates with the created size dimensions of the surface structures. These findings suggest favourable biomaterial interfaces for electronic devices. The mechanisms which are responsible for selective cell control are poorly understood. To give an insight, cell behaviour in dependence of biomaterial interfaces is discussed-including basic research on the role of the extracellular matrix. This knowledge is essential to understand such specific cell responses and to optimize biomaterial interfaces for future biomedical applications.

Surface biotechnology for refining cochlear implants

The advent of the cochlear implant is phenomenal because it is the first surgical prosthesis that is capable of restoring one of the senses. The subsequent rapid evolution of cochlear implants through increasing complexity and functionality has been synchronized with the recent advancements in biotechnology. Surface biotechnology has refined cochlear implants by directly influencing the implant–tissue interface. Emerging surface biotechnology strategies are exemplified by nanofibrous polymeric materials, topographical surface modification, conducting polymer coatings, and neurotrophin-eluting implants. Although these novel developments have received individual attention in the recent literature, the time has come to investigate their collective applications to cochlear implants to restore lost hearing.

Neurons on nanometric topographies: insights into neuronal behaviors in vitro

Topography, the physical characteristics of an environment, is one of the most prominent stimuli neurons can encounter in the body. Many aspects of neurons and neuronal behavior are affected by the size, shape, and pattern of the physical features of the environment. A recent increase in the use of nanometric topographies, due to improved fabrication techniques, has resulted in new findings on neuronal behavior and development. Factors such as neuron adhesion, neurite alignment, and even the rate of neurite formation have all been highlighted through nanotopographies as complex phenomena that are driven by intricate intracellular mechanisms. Nanotopographies are suitable platforms, not only for fundamental studies on neuronal development, but also in practical applications, including multielectrode array devices and neuro-regenerative medicine. We reviewed recent publications that address the effects of nanotopography on neurons and categorized the observed behaviors as adherence, directional guidance, or accelerated outgrowth. We also discussed possible biological mechanisms of the molecular and cellular responses to topography, and suggested future perspectives for this field.