Synthesis of silver nanoparticles confined in hierarchically porous monolithic silica: a new function in aromatic hydrocarbon separations

Green Silver Nanoparticles Confined in Monolithic Silica Disk-packed Spin Column for Human Serum Albumin Preconcentration

Background:

In recent times many new uses have been found for nanomaterials that have undergone homogenous immobilization within porous supports. For this paper, immobilization of SNPs on a thiol-functionalized silica monolith using a fast, easy, environmentally friendly and costeffective process was performed. This was achieved by modifying the surface of a silica-based monolith using thiol groups, and then we fabricated green SNPs in situ, reducing an inorganic precursor silver nitrate solution (AgNO3) by employing tangerine peel extract as a reducing reagent, with Ag-thiol bonds forming along the monument. Doing this allows monoliths to be prepared in such a way that, as TEM analysis demonstrated, SNPs are evenly distributed along the rod's length. Once the materials had been fabricated, they were employed as a sorbent by being placed in a centrifuge. The SNP-thiol functionalized silica monolith was then tested using a standard protein (HSA).

Methods:

The process involves creating monolithic materials by employing a two-part sol-gel technique before modifying the surface of the silica-based monolith using thiol groups for hosting purposes. Homogenous surface coverage was achieved through the use of a non-toxic "green" reducing reagent (tangerine peel extract) to reduce a silver nitrate solution in place to create SNPs joined to the pore surface of a thiol-functionalized silica monolith, employing bonds of Ag-thiol. Once these materials were synthesized, they were classified by utilizing a number of methods based on SEM coupled with EDAX, TEM, AFM and BET analysis. The silica-based monolith, embedded with constructed SNPs, was employed as a sorbent in the preconcentration of human serum albumin (HSA).

Results:

The performance of the fabricated materials was measured against a silica-based monolith with no SNPs. Also, a silica monolith with constructed SNPs embedded was employed to capture HSA within a sample of human urine mixed with a double detergent concentrate (SDS). Such a monolith containing functionalized SNPs can be a highly effective sorbent for preconcentration of proteins in complex samples.

Conclusion:

It was shown to have superior performance compared to a bare silica-based monolith. Additionally, it was shown that a monolithic column modified by SNPs could preconcentrate spiked HSA in urine samples.

Silver nanoparticles-coated monolithic column for in-tube solid-phase microextraction of monounsaturated fatty acid methyl esters

Based on our developed sodium hyaluronate-functionalized urea-formaldehyde (HA-UF) monolith, a silver nanoparticles-coated monolithic column has been fabricated via the interaction between silver nanoparticles (Ag NPs) and HA. The successful coating of Ag NPs on the parent monolith was proven by SEM, EDAX, UV-vis spectrum and XPS. Nitrogen adsorption desorption isotherms and Barret-Joyner-Halenda (BJH) pore size distributions of the parent and resultant monolith were also performed. Due to the Ag⁺-like affinity interaction caused by the contact of unsaturated compounds and Ag NPs, the Ag NPs-coated monolith showed satisfactory extraction efficiency towards these compounds, and was applied for in-tube solid-phase microextraction (SPME) of monounsaturated fatty acid methyl esters (MUFAMEs). Several factors for in-tube SPME, such as ACN percentage in the sampling solution, elution volume, sampling and elution flow rate, were investigated with respect to the extraction efficiency of model MUFAMEs. Under the optimized SPME conditions, a simple in tube SPME-Ag⁺-HPLC method for detection of model MUFAMEs has been proposed, the limits of detection (LODs) were less than 5.2 μg/kg, and the recoveries of spiked French fry samples were ranged from 86.6% to 96.1% with relative standard deviations (RSDs) less than 5.2%. This study provided an Ag NPs-coated monolith with good reproducibility and repeatable extraction performance, and developed an efficient method for in-tube SPME of MUFAMEs in practical food samples.

Sugar-based micro/mesoporous hypercross-linked polymers with in situ embedded silver nanoparticles for catalytic reduction

Porous hypercross-linked polymers based on perbenzylated monosugars (SugPOP-1–3) have been synthesized by Friedel–Crafts reaction using formaldehyde dimethyl acetal as an external cross-linker. Three perbenzylated monosugars with similar chemical structure were used as monomers in order to tune the porosity. These obtained polymers exhibit microporous and mesoporous features. The highest Brunauer–Emmett–Teller specific surface area for the resulting polymers was found to be 1220 m² g⁻¹, and the related carbon dioxide storage capacity was found to be 14.4 wt % at 1.0 bar and 273 K. As the prepared porous polymer SugPOP-1 is based on hemiacetal glucose, Ag nanoparticles (AgNPs) can be successfully incorporated into the polymer by an in situ chemical reduction of freshly prepared Tollens’ reagent. The obtained AgNPs/SugPOP-1 composite demonstrates good catalytic activity in the reduction of 4-nitrophenol (4-NP) with an activity factor k_a = 51.4 s⁻¹ g⁻¹, which is higher than some reported AgNP-containing composite materials.

Recent Progress in Monolithic Silica Columns for High-Speed and High-Selectivity Separations

Monolithic silica columns have greater (through-pore size)/(skeleton size) ratios than particulate columns and fixed support structures in a column for chemical modification, resulting in high-efficiency columns and stationary phases. This review looks at how the size range of monolithic silica columns has been expanded, how high-efficiency monolithic silica columns have been realized, and how various methods of silica surface functionalization, leading to selective stationary phases, have been developed on monolithic silica supports, and provides information on the current status of these columns. Also discussed are the practical aspects of monolithic silica columns, including how their versatility can be improved by the preparation of small-sized structural features (sub-micron) and columns (1 mm ID or smaller) and by optimizing reaction conditions for in situ chemical modification with various restrictions, with an emphasis on recent research results for both topics.

Silver nanoparticles in aquatic environments: Physiochemical behavior and antimicrobial mechanisms

Nanosilver (silver nanoparticles or AgNPs) has unique physiochemical properties and strong antimicrobial activities. This paper provides a comprehensive review of the physicochemical behavior (e.g., dissolution and aggregation) and antimicrobial mechanisms of nanosilver in aquatic environments. The inconsistency in calculating the Gibbs free energy of formation of nanosilver [ΔGf(AgNPs)] in aquatic environments highlights the research needed to carefully determine the thermodynamic stability of nanosilver. The dissolutive release of silver ion (Ag(+)) in the literature is often described using a pseudo-first-order kinetics, but the fit is generally poor. This paper proposes a two-stage model that could better predict silver ion release kinetics. The theoretical analysis suggests that nanosilver dissolution could occur under anoxic conditions and that nanosilver may be sulfidized to form silver sulfide (Ag2S) under strict anaerobic conditions, but more investigation with carefully-designed experiments is required to confirm the analysis. Although silver ion release is likely the main antimicrobial mechanism of nanosilver, the contributions of (ion-free) AgNPs and reactive oxygen species (ROS) generation to the overall toxicity of nanosilver must not be neglected. Several research directions are proposed to better understand the dissolution kinetics of nanosilver and its antimicrobial mechanisms under various aquatic environmental conditions.

High-performance liquid chromatography separation of unsaturated organic compounds by a monolithic silica column embedded with silver nanoparticles

The optimization of a porous structure to ensure good separation performances is always a significant issue in high-performance liquid chromatography column design. Recently we reported the homogeneous embedment of Ag nanoparticles in periodic mesoporous silica monolith and the application of such Ag nanoparticles embedded silica monolith for the high-performance liquid chromatography separation of polyaromatic hydrocarbons. However, the separation performance remains to be improved and the retention mechanism as compared with the Ag ion high-performance liquid chromatography technique still needs to be clarified. In this research, Ag nanoparticles were introduced into a macro/mesoporous silica monolith with optimized pore parameters for high-performance liquid chromatography separations. Baseline separation of benzene, naphthalene, anthracene, and pyrene was achieved with the theoretical plate number for analyte naphthalene as 36,000 m(-1). Its separation function was further extended to cis/trans isomers of aromatic compounds where cis/trans stilbenes were chosen as a benchmark. Good separation of cis/trans-stilbene with separation factor as 7 and theoretical plate number as 76,000 m(-1) for cis-stilbene was obtained. The trans isomer, however, is retained more strongly, which contradicts the long- established retention rule of Ag ion chromatography. Such behavior of Ag nanoparticles embedded in a silica column can be attributed to the differences in the molecular geometric configuration of cis/trans stilbenes.

General Reagent Free Route to pH Responsive Polyacryloyl Hydrazide Capped Metal Nanogels for Synergistic Anticancer Therapeutics

Herewith, we report a facile synthesis of pH responsive polyacryloyl hydrazide (PAH) capped silver (Ag) or gold (Au) nanogels for anticancer therapeutic applications. A cost-effective instant synthesis of PAH-Ag or PAH-Au nanoparticles (NPs) possessing controllable particle diameter and narrow size distribution was accomplished by adding AgNO3 or AuCl to the aqueous solution of PAH under ambient conditions without using any additional reagent. PAH possessing carbonyl hydrazide pendant functionality served as both reducing and capping agent to produce and stabilize the NPs. The stability analysis by UV-vis, dynamic light scattering, and transmission electron microscopy techniques suggested that these NPs may be stored in a refrigerator for at least up to 2 weeks with negligible change in conformation. The average hydrodynamic size of PAH-Ag NPs synthesized using 0.2 mmol/L AgNO3 changed from 122 to 226 nm on changing the pH of the medium from 5.4 to 7.4, which is a characteristic property of pH responsive nanogel. Camptothecin (CPT) with adequate loading efficiency (6.3%) was encapsulated in the PAH-Ag nanogels. Under pH 5.4 conditions, these nanogels released 78% of the originally loaded CPT over a period of 70 h. The antiproliferative potential of PAH-Ag-CPT nanogels (at [CPT]=0.6 μg/mL) against MCF-7 breast adeno-carcinoma cells were ∼350% higher compared to that of the free CPT as evidenced by high cellular internalization of these nanogels. Induction of apoptosis in MCF-7 breast adeno-carcinoma cells by PAH-Ag-CPT nanogels was evidenced by accumulation of late apoptotic cell population. Drug along with the PAH-Ag NPs were also encapsulated in a pH responsive hydrogel through in situ gelation at room temperature using acrylic acid as the cross-linker. The resulting hydrogel released quantitative amounts of both drug and PAH-Ag NPs over a period of 16 h. The simplicity of synthesis and ease of drug loading with efficient release render these NPs a viable candidate for various biomedical applications, and moreover this synthetic procedure may be extended to other metal NPs.

Bioinspired preparation of monolithic ordered mesoporous silica for enrichment of endogenous peptides

Monolithic ordered mesoporous silica with various sizes and shapes were prepared in one-pot modified Stöber synthesis using pomelo peel and CTAB as dual templates, and applied as packing adsorbents for peptide enrichment.

Mechanically stable, hierarchically porous Cu3(btc)2 (HKUST-1) monoliths via direct conversion of copper(ii) hydroxide-based monoliths

Robust, hierarchically porous Cu₃(btc)₂ (HKUST-1, btc³⁻ = benzene-1,3,5-tricalboxylate) monoliths have been synthesized by direct conversion of sol–gel-derived Cu(OH)₂-based monoliths.

Hydrophobic gold nanostructures via electrochemical deposition for sensitive SERS detection of persistent toxic substances

The hydrophobic gold nanostructures were used for direct SERS detection of PTS with high sensitivity.

Preparation of silver nanoparticles embedded hierarchically porous AlPO4 monoliths

Silver nanoparticles were homogenously embedded on the skeletons of hierarchically porous AlPO₄ by immersing the monoliths in a silver colloid.

Fabrication of hierarchically porous materials and nanowires through coffee ring effect

We report a versatile method for the fabrication of nanowires and hierarchical porous materials from a wide variety of ceramic materials such as CaCO3, ZnO, CuO, Co3O4, Co-doped ZnO, and Ag2O. The method consists of evaporation of CO2-enriched water microdroplets (diameter ∼3 μm) deposited from an aerosol onto heated substrates (T = 120 °C). A variety of porous scaffolds with 1-3 μm sized pores can be generated by tuning the process conditions. Subsequent sintering of the scaffolds is shown to generate nanosized pores in the walls of the porous scaffold creating a dual hierarchy of pore sizes (∼50 nm and 1-3 μm). We propose a mechanism for the formation of scaffolds based on the coffee-ring effect during the evaporation of microdroplets. Ostwald-ripening of CaCO3 scaffolds prepared without sintering yields scaffold structures consisting of two-dimensional crystals of CaCO3 that are one unit cell thick. The favorable application of CaCO3 scaffolds for the enhancement of bone healing around titanium implants with improved biocompatibility is also demonstrated.

Highly selective detection of polycyclic aromatic hydrocarbons using multifunctional magnetic-luminescent molecularly imprinted polymers

A facile method is presented for the selective luminescence detection of trace polycyclic aromatic hydrocarbons (PAHs) based on a combination of the specific recognition of molecularly imprinted polymers (MIPs) and magnetic separation (MS). Multifunctional magnetic-luminescent MIP nanocomposites were fabricated via a one-pot emulsion strategy using polystyrene-co-methacrylic acid copolymer, hydrophobic Fe3O4 nanoparticles and luminescent LaVO4:Eu(3+) nanoparticles as building blocks with a phenanthrene template. The resulting nanocomposites can be employed in a simple method for the luminescence detection of phenanthrene. Furthermore, magnetic separation of the nanocomposites from the target mixture prior to luminescence detection of phenanthrene affords significantly enhanced selectivity and sensitivity, with a 3σ limit of detection (LOD) as low as 3.64 ng/mL. Milk samples spiked with phenanthrene (5.0 μg/mL) were assayed via this method and recoveries ranging from 97.11 to 101.9% were obtained, showing that our strategy is potentially applicable for the preconcentration, recovering, and monitoring of trace PAHs in complex mixtures.