Hydrolytic stability of mesoporous zirconium titanate frameworks containing coordinating organic functionalities

New insights into the radiolytic stability of metal(iv) phosphonate hybrid adsorbent materials

Stable metal(iv) phosphonate hybrids are a promising class of materials for the critical issue of nuclear waste cleanup. However, to be of practical use, adsorbent materials must demonstrate radiolytic stability and this property remains poorly understood. Therefore, the radiolytic stabilities of post-functionalised mesoporous zirconium titanate and zirconium phosphonate coordination polymers were compared. For the first time, solid-state ³¹P MAS-NMR was used to probe the radiolytic degradation of metal(iv) phosphonates and provide mechanistic insight. Polyphosphonate-functionalized hybrids were more stable than monophosphonate hybrids, as the monophosphonate readily detached from the oxide surface. The zirconium phosphonate coordination polymer (Zr-ATMP) demonstrated the greatest radiolytic stability, attributed to its high ligand loading and intimately mixed structure. Zr-ATMP maintained highly efficient sorption from strongly acidic solutions even after receiving doses of gamma radiation up to 2.9 MGy.

Heterogeneous Catalytic Upgrading of Biofuranic Aldehydes to Alcohols

Heterogeneous catalytic conversion of lignocellulosic components into valuable chemicals and biofuels is one of the promising ways for biomass valorization, which well meets green chemistry metrics, and can alleviate environmental and economic issues caused by the rapid depletion of fossil fuels. Among the identified biomass derivatives, furfural (FF) and 5-hydroxymethylfurfural (HMF) stand out as rich building blocks and can be directly produced from pentose and hexose sugars, respectively. In the past decades, much attention has been attracted to the selective hydrogenation of FF and 5-hydroxymethylfurfural using various heterogeneous catalysts. This review evaluates the recent progress of developing different heterogeneous catalytic materials, such as noble/non-noble metal particles, solid acids/bases, and alkali metal salts, for the efficient reduction of bio-based furanic aldehydes to alcohols. Emphasis is laid on the insights and challenges encountered in those biomass transformation processes, along with the focus on the understanding of reaction mechanisms to clarify the catalytic role of specific active species. Brief outlook is also made for further optimization of the catalytic systems and processes for the upgrading of biofuranic compounds.

Zirconium bistriazolylpyridine phosphonate materials for efficient, selective An(iii)/Ln(iii) separations

Direct synthesis of ZrCl₄ and bistriazolylpyridine phosphonate has produced novel sorbent materials that, for the first time, demonstrate selective extraction of Am(iii) in the presence of excess Eu(iii). Further, the high ligand content of these materials affords them high extraction efficiencies.

Facile preparation of magnetic carbon nanotubes@ZIF-67 for rapid removal of tetrabromobisphenol A from water sample

In this work, a novel magnetic carbon nanotube@zeolitic imidazolate framework-67 (MCNT@ZIF-67) composite was prepared facilely by a one-pot method using Fe₃O₄@SiO₂ as the magnetic element, CNTs as the carbon matrix, and 2-methylimidazole (2-MIM) and cobaltous nitrate (Co(NO₃)₂·6H₂O) as the organic and inorganic elements, respectively. The obtained MCNT@ZIF-67 composite was characterized by transmission electron microscopy (TEM), Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). Static adsorption experiments demonstrated that the maximum adsorption capacity of MCNTs@ZIF-67 for tetrabromobisphenol A (TBBPA) is 83.23 mg g^-1, and the sorption isotherm was fitted well by the Freundlich adsorption model. Dynamic adsorption experiments illustrated that the adsorption of TBBPA on MCNTs@ZIF-67 can reach equilibrium in 20 min, and the adsorption kinetics of TBBPA were fitted well by a pseudo-second-order kinetic model. The adsorption of TBBPA on MCNTs@ZIF-67 showed favorable selectivity. The pH and the NaCl and NH₄Cl common salts did not affect the TBBPA adsorption. Then, the proposed magnetic composite was applied as the adsorbent for the rapid removal of TBBPA in water samples, and the removal ratio of MCNTs@ZIF-67 for TBBPA in different spiked water samples with different volumes was above 95% with RSD < 5%. Furthermore, as a new removal sorbent, the removal reproducibility of MCNTs@ZIF-67 for TBBPA was favorable and stable, with only a 6.0% decrease after 6 cycles.

High-Capacity Poly(4-vinylpyridine) Grafted PolyHIPE Foams for Efficient Plutonium Separation and Purification

The use of anion-exchange resins to separate and purify plutonium from various sources represents a major bottleneck in the throughput that can be achieved when this step is part of a larger separation scheme. Slow sorption kinetics and broad elution profiles necessitate long contact times with the resin, and the recovered Pu is relatively dilute, requiring the handling of large volumes of hazardous material. In this work, high internal-phase emulsion (HIPE) foams were prepared with a comonomer containing a dormant nitroxide. Using surface-initiated nitroxide-mediated polymerization, the foam surface was decorated with a brush of poly(4-vinylpyridine), and the resulting materials were tested under controlled flow conditions as anion-exchange media for plutonium separations. It was found that the grafted foams demonstrated greater ion-exchange capacity per unit volume than a commercial resin commonly used for Pu separations and had narrower elution profiles. The ion-exchange sites (quaternized pyridine) were exposed on the surface of the large pores of the foam, resulting in convective mass transfer, the driving force for the excellent separation properties exhibited by the synthesized polyHIPE foams.

The Hydrolytic Stability and Degradation Mechanism of a Hierarchically Porous Metal Alkylphosphonate Framework

To aid the design of a hierarchically porous unconventional metal-phosphonate framework (HP-UMPF) for practical radioanalytical separation, a systematic investigation of the hydrolytic stability of bulk phase against acidic corrosion has been carried out for an archetypical HP-UMPF. Bulk dissolution results suggest that aqueous acidity has a more paramount effect on incongruent leaching than the temperature, and the kinetic stability reaches equilibrium by way of an accumulation of a partial leached species on the corrosion conduits. A variation of particle morphology, hierarchical porosity and backbone composition upon corrosion reveals that they are hydrolytically resilient without suffering any great degradation of porous texture, although large aggregates crack into sporadic fractures while the nucleophilic attack of inorganic layers cause the leaching of tin and phosphorus. The remaining selectivity of these HP-UMPFs is dictated by a balance between the elimination of free phosphonate and the exposure of confined phosphonates, thus allowing a real-time tailor of radionuclide sequestration. Moreover, a plausible degradation mechanism has been proposed for the triple progressive dissolution of three-level hierarchical porous structures to elucidate resultant reactivity. These HP-UMPFs are compared with benchmark metal-organic frameworks (MOFs) to obtain a rough grading of hydrolytic stability and two feasible approaches are suggested for enhancing their hydrolytic stability that are intended for real-life separation protocols.

Separation of actinides from spent nuclear fuel: A review

This review summarises the methods currently available to extract radioactive actinide elements from solutions of spent nuclear fuel. This separation of actinides reduces the hazards associated with spent nuclear fuel, such as its radiotoxicity, volume and the amount of time required for its' radioactivity to return to naturally occurring levels. Separation of actinides from environmental water systems is also briefly discussed. The actinide elements typically found in spent nuclear fuel include uranium, plutonium and the minor actinides (americium, neptunium and curium). Separation methods for uranium and plutonium are reasonably well established. On the other hand separation of the minor actinides from lanthanide fission products also present in spent nuclear fuel is an ongoing challenge and an area of active research. Several separation methods for selective removal of these actinides from spent nuclear fuel will be described. These separation methods include solvent extraction, which is the most commonly used method for radiochemical separations, as well as the less developed but promising use of adsorption and ion-exchange materials.

Selective sorption of actinides by titania nanoparticles covalently functionalized with simple organic ligands

Although current and proposed reprocessing of used nuclear fuel is performed predominantly by solvent extraction processes, solid phase sorbent materials have many advantages including the ability to avoid production of large volumes of organic waste. Therefore, three titania nanoparticle based sorbent materials have been developed, functionalized with organic ligands designed to impart selectivity for elements relevant to important separations at the back end of the nuclear fuel cycle. A novel, simplified method of covalent functionalization to the titania surface has been utilized, and the resulting materials have been shown to be hydrolytically stable at pH 2. The sorption behavior of these organofunctionalized titania materials was investigated over a wide pH range with a selection of elements including fission products and actinides. Titania nanoparticles functionalized with an amine or phosphate moiety were able to demonstrate exclusive extraction of uranium under optimized conditions. Titania nanoparticles functionalized with a picolinamide moiety exhibited superior minor actinide sorption properties, in terms of both efficiency and selectivity, to solvent extraction processes using similar organic moieties. As such, organo-functionalized titania materials as solid phase sorbents show promise as a future alternative to solvent extraction processes for nuclear separations.