Green synthetic, multifunctional hybrid micelles with shell embedded magnetic nanoparticles for theranostic applications

An MMP-2 Responsive Nanotheranostic Probe Enabled Synergistic Therapy of Rheumatoid Arthritis and MR/CT Assessment of Therapeutic Response In Situ

This study reports a facile and green synthesis of a new multifunctional nanotheranostic probe for the synergistic therapy of rheumatoid arthritis (RA) and in situ assessment of therapeutic response. The probe is synthesized through a one-step self-assembly of two exquisitely designed peptide-amphiphilic block copolymers (PEG-DTIPA-KGPLGVRK-MTX and Pal-GGGGHHHHD-TCZ) under mild conditions, requiring minimal energy input. The resultant probe demonstrates excellent biocompatibility, water solubility, and colloidal stability. It exhibits a strong IL-6R targeting ability toward inflamed joints, and releases drugs in an MMP-2-responsive manner. The co-loading of methotrexate(MTX) and tocilizumab (TCZ) into the probe enables synergistic RA therapy with improved efficacy by simultaneously decreasing the activity of adenosine synthetase and interfering with the binding of IL-6 to its receptor. In addition, the resultant probe exhibits a high r1 relaxation rate (7.00 mm-1  s-1 ) and X-ray absorption capability (69.04 Hu mm-1 ), enabling sensitive MR and CT dual-modal imaging for simultaneous evaluation of synovial thickness and bone erosion. Both in vitro experiments using lipopolysaccharide-treated RAW264.7 cells and in vivo experiments using collagen-induced arthritis mice demonstrate the probe's high effectiveness in synergistically inhibiting inflammation. This study provides new insights into RA theranostics, therapeutic monitoring, the design of multifunctional theranostic probes, and beyond.

Injectable thermosensitive lipo-hydrogels loaded with ropivacaine for prolonging local anesthesia

Reducing post-surgical pain can promote recovery of mobility, improve patient satisfaction, and reduce the risk of chronic pain syndrome. When managing post-surgical pain, single-injection local anesthesia is more convenient and involves lower risk to the patient than multi-injection regimes, but the effects are not long-lasting. Here we developed a system that can prolong local anesthesia after a single injection. In this system, ropivacaine (Ro) is encapsulated into liposomes, which are then loaded into Poloxamer 407-based thermosensitive hydrogels. The Ro-loaded liposome-in-gel system (Ro-Lip-Gel) is in a sol state before injection, and immediately after subcutaneous injection, it forms a gel in situ. We show through in vitro release and in vivo pharmacokinetics studies that this gel acts as a drug release depot. In rats, the initial burst release of Ro was smaller from Ro-Lip-Gel than from Ro solution or Ro-Gel, and Ro-Lip-Gel caused nerve blockade lasting four times longer than Ro solution. Ro-Lip-Gel degraded in vivo and showed good biocompatibility. Our results suggest that a liposome-in-gel system can show small initial burst release, long-term nerve blockade and good biocompatibility in vitro and in vivo. Therefore, such a system may be useful for sustained local anesthesia without systemic toxicity.

Small interfering RNA for cancer treatment: overcoming hurdles in delivery

In many ways, cancer cells are different from healthy cells. A lot of tactical nano-based drug delivery systems are based on the difference between cancer and healthy cells. Currently, nanotechnology-based delivery systems are the most promising tool to deliver DNA-based products to cancer cells. This review aims to highlight the latest development in the lipids and polymeric nanocarrier for siRNA delivery to the cancer cells. It also provides the necessary information about siRNA development and its mechanism of action. Overall, this review gives us a clear picture of lipid and polymer-based drug delivery systems, which in the future could form the base to translate the basic siRNA biology into siRNA-based cancer therapies.

A Versatile Strategy for Unimolecular Micelle-Derived Hollow Polymer Nanoparticles as General Nanoreactors

We reported the synthesis of a well-defined hollow polymer nanoparticle derived from star-shaped unimolecular micelles. β-Cyclodextrin was first applied as an efficient macroinitiator to prepare a star-shaped PCL via ring-opening polymerization (ROP). Then, the star-shaped PCL was modified to be a macro-RAFT agent for photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of S-Cl monomers. The prepared unimolecular micelles can be photocross-linked under UV irradiation after a simple nucleophilic substitution reaction, which made -Cl groups to be -N₃ groups. After the selective removal of the PCL core, hollow polymer nanoparticles were achieved and exhibited to be a general nanoreactor strategy for the fabrication of nanocrystals with well-controlled architectures. Compared with unimolecular micelle templates, the nanocrystals prepared by hollow templates are absolutely pure as no polymer chains are embedded in the inorganic nanocrystals. In addition, by changing the concentration of the precursor, the structure of the nanocrystal can be changed from a normal spherical structure to a hollow structure.

Nanomedicine for cancer diagnosis and therapy: advancement, success and structure-activity relationship

Multifunctional nanoparticles (NPs), composed of organic and inorganic materials, have been explored as promising drug-delivery vehicles for cancer diagnosis and therapy. The success of nanosystems has been attributed to its smaller size, biocompatibility, selective tumor accumulation and reduced toxicity. The relationship among numbers of molecules in payload, NP diameter and encapsulation efficacy have crucial role in clinical translation. Advancement of bioengineering, and systematic fine-tuning of functional components to NPs have diversified their optical and theranostic properties. In this review, we summarize wide varieties of NPs, such as ultrasmall polymer-lipid hybrid NPs, dendrimers, liposomes, quantum dots, carbon nanotubes, gold NPs and iron oxide NPs. We also discuss their tumor targetability, tissue penetration, pharmacokinetics, and therapeutic and diagnostic properties. [Formula: see text].

Facile synthesis, biofilm disruption properties and biocompatibility study of a poly-cationic peptide functionalized graphene–silver nanocomposite

Safe-by-design synthesis of a poly-cationic functionalized graphene–silver nanocomposite as a novel eco-benign antibacterial, biofilm inhibiting and disrupting agent.

Dual-Mode Encoded Magnetic Composite Microsphere Based on Fluorescence Reporters and Raman Probes as Covert Tag for Anticounterfeiting Applications

Utilizing fluorescence reporters and SERS probes as the security labels, a series of dual-mode encoded magnetic composite microspheres with micrometer size was designed and prepared for anticounterfeiting applications. At first, the micro-meter-sized melamine formaldehyde microspheres with different fluorescence molecules (FMF) were prepared by precipitation polymerization, and then the magnetite composite microspheres (FMF/MNPs) were fabricated by direct immobilization of magnetic nanoparticles (MNPs) onto the surface of FMF microspheres. After deposition of Ag nanoparticles (Ag-NPs) onto FMF/MNPs microspheres, the SERS probes were absorbed onto the surface of Ag-NPs, and then a protection layer of silica was coated on the composite microspheres by Stöber method. The combination of different fluorescence reporters and SERS probes greatly increased the encoding complexity and volume for high-level anticounterfeiting. The structure of the dual-encoded FMF/MNPs/Ag-NPs/SiO2 composite microspheres was characterized by FESEM, TEM, FLS(fluorescence spectrometer), XRD, VSM, UV-vis and EDS. The embedded magnetic nanoparticles enable the composite microspheres to be quickly isolated from the marked latex paint by magnet at the concentration of as low as 1 ppm, and the covert tag information can be read out even from one composite microsphere. In addition, the covert security information in the marked coating film can be also read out in situ and the existence of the composite microspheres does not influence the visible appearance of the coating film. All the above outstanding properties will make these dual-mode encoded composite microspheres as advanced security tags for next-generation anticounterfeiting applications.

Reduction-sensitive amphiphilic dextran derivatives as theranostic nanocarriers for chemotherapy and MR imaging

Reduction-sensitive, amphiphilic dextran derivatives were developed from disulfide-linked dextran-g-poly-(N-ε-carbobenzyloxy-l-lysine) graft polymer (Dex-g-SS-PZLL), and used as theranostic nanocarriers for chemotherapy and MR imaging.

Gadolinium/DOTA functionalized poly(ethylene glycol)-block-poly(acrylamide-co-acrylonitrile) micelles with synergistically enhanced cellular uptake for cancer theranostics

The combination of diagnostic and therapeutic functions into a nano-carrier could achieve a delivery system with both accurate diagnosis and delivery capabilities.

Photo-fluorescent and magnetic properties of iron oxide nanoparticles for biomedical applications

Iron oxide exhibits fascinating physical properties especially in the nanometer range, not only from the standpoint of basic science, but also for a variety of engineering, particularly biomedical applications. For instance, Fe3O4 behaves as superparamagnetic as the particle size is reduced to a few nanometers in the single-domain region depending on the type of the material. The superparamagnetism is an important property for biomedical applications such as magnetic hyperthermia therapy of cancer. In this review article, we report on some of the most recent experimental and theoretical studies on magnetic heating mechanisms under an alternating (AC) magnetic field. The heating mechanisms are interpreted based on Néel and Brownian relaxations, and hysteresis loss. We also report on the recently discovered photoluminescence of Fe3O4 and explain the emission mechanisms in terms of the electronic band structures. Both optical and magnetic properties are correlated to the materials parameters of particle size, distribution, and physical confinement. By adjusting these parameters, both optical and magnetic properties are optimized. An important motivation to study iron oxide is due to its high potential in biomedical applications. Iron oxide nanoparticles can be used for MRI/optical multimodal imaging as well as the therapeutic mediator in cancer treatment. Both magnetic hyperthermia and photothermal effect has been utilized to kill cancer cells and inhibit tumor growth. Once the iron oxide nanoparticles are up taken by the tumor with sufficient concentration, greater localization provides enhanced effects over disseminated delivery while simultaneously requiring less therapeutic mass to elicit an equal response. Multi-modality provides highly beneficial co-localization. For magnetite (Fe3O4) nanoparticles the co-localization of diagnostics and therapeutics is achieved through magnetic based imaging and local hyperthermia generation through magnetic field or photon application. Here, Fe3O4 nanoparticles are shown to provide excellent conjugation bases for entrapment of therapeutic molecules, fluorescent agents, and targeting ligands; enhancement of solid tumor treatment is achieved through co-application of local hyperthermia with chemotherapeutic agents.

Self-assembled superparamagnetic nanocomposite-labelled cells for noninvasive, controlled, targeted delivery and therapy

Efficient delivery of cells to targeted sites at optimal concentrations within rational limits of damage to normal tissue is a major challenge for cell delivery.

Nanomaterials for diagnosis: challenges and applications in smart devices based on molecular recognition

Clinical diagnosis has always been dependent on the efficient immobilization of biomolecules in solid matrices with preserved activity, but significant developments have taken place in recent years with the increasing control of molecular architecture in organized films. Of particular importance is the synergy achieved with distinct materials such as nanoparticles, antibodies, enzymes, and other nanostructures, forming structures organized on the nanoscale. In this review, emphasis will be placed on nanomaterials for biosensing based on molecular recognition, where the recognition element may be an enzyme, DNA, RNA, catalytic antibody, aptamer, and labeled biomolecule. All of these elements may be assembled in nanostructured films, whose layer-by-layer nature is essential for combining different properties in the same device. Sensing can be done with a number of optical, electrical, and electrochemical methods, which may also rely on nanostructures for enhanced performance, as is the case of reporting nanoparticles in bioelectronics devices. The successful design of such devices requires investigation of interface properties of functionalized surfaces, for which a variety of experimental and theoretical methods have been used. Because diagnosis involves the acquisition of large amounts of data, statistical and computational methods are now in widespread use, and one may envisage an integrated expert system where information from different sources may be mined to generate the diagnostics.

Superparamagnetic Nanoparticles for Atherosclerosis Imaging

The production of magnetic nanoparticles of utmost quality for biomedical imaging requires several steps, from the synthesis of highly crystalline magnetic cores to the attachment of the different molecules on the surface. This last step probably plays the key role in the production of clinically useful nanomaterials. The attachment of the different biomolecules should be performed in a defined and controlled fashion, avoiding the random adsorption of the components that could lead to undesirable byproducts and ill-characterized surface composition. In this work, we review the process of creating new magnetic nanomaterials for imaging, particularly for the detection of atherosclerotic plaque, in vivo. Our focus will be in the different biofunctionalization techniques that we and several other groups have recently developed. Magnetic nanomaterial functionalization should be performed by chemoselective techniques. This approach will facilitate the application of these nanomaterials in the clinic, not as an exception, but as any other pharmacological compound.

Multifunctional polymeric micelles for delivery of drugs and siRNA

Polymeric micelles, self-assembling nano-constructs of amphiphilic copolymers with a core-shell structure have been used as versatile carriers for delivery of drugs as well as nucleic acids. They have gained immense popularity owing to a host of favorable properties including their capacity to effectively solubilize a variety of poorly soluble pharmaceutical agents, biocompatibility, longevity, high stability in vitro and in vivo and the ability to accumulate in pathological areas with compromised vasculature. Moreover, additional functions can be imparted to these micelles by engineering their surface with various ligands and cell-penetrating moieties to allow for specific targeting and intracellular accumulation, respectively, to load them with contrast agents to confer imaging capabilities, and incorporating stimuli-sensitive groups that allow drug release in response to small changes in the environment. Recently, there has been an increasing trend toward designing polymeric micelles which integrate a number of the above functions into a single carrier to give rise to “smart,” multifunctional polymeric micelles. Such multifunctional micelles can be envisaged as key to improving the efficacy of current treatments which have seen a steady increase not only in hydrophobic small molecules, but also in biologics including therapeutic genes, antibodies and small interfering RNA (siRNA). The purpose of this review is to highlight recent advances in the development of multifunctional polymeric micelles specifically for delivery of drugs and siRNA. In spite of the tremendous potential of siRNA, its translation into clinics has been a significant challenge because of physiological barriers to its effective delivery and the lack of safe, effective and clinically suitable vehicles. To that end, we also discuss the potential and suitability of multifunctional polymeric micelles, including lipid-based micelles, as promising vehicles for both siRNA and drugs.

Multifunctional nanoplatforms for targeted multidrug-resistant-bacteria theranostic applications

The emergence of multidrug-resistant-bacteria (MDRB) infection poses a major burden to modern healthcare. Early detection in the bloodstream and a new strategy development for MDRB infection treatment without antibiotics are clinically significant to save millions of lives every year. To tackle the MDRB challenge, the current manuscript reports the design of "multifunctional nanoplatforms" consisting of a magnetic core-plasmonic shell nanoparticle, a methylene blue-bound aptamer, and an MDRB Salmonella DT104 specific antibody. The reported "multifunctional nanoplatform" is capable of targeted separation from a blood sample and sensing and multimodal therapeutic killing of MDRB. Experimental data using an MDRB-infected whole-blood sample show that nanoplatforms can be used for selective magnetic separation and fluorescence imaging. In vitro light-triggered photodestruction of MDRB, using combined photodynamic and photothermal treatment, shows that the multimodal treatment regime can enhance MDRB killing significantly. We discussed the possible mechanisms on combined synergistic therapy for killing MDRB. The "multifunctional nanoplatform" reported in this manuscript has great potential for the imaging and combined therapy of MDRB in clinical settings.