Influence of sodium halides (NaF, NaCl, NaBr, NaI) on the photocatalytic performance of hydrothermally synthesized hematite photoanodes

Photocatalytic oxidation of ciprofloxacin by UV/ α-Fe2O3/sulfite: mechanism, kinetic, degradation pathway

This study was aimed to investigate the synergistic effect of sulfite reducing agent on the UV/hematite (α-Fe₂O₃) photocatalytic process performance in the removal of ciprofloxacin from the aqueous solutions. For this purpose, influence of the operation parameters including initial antibiotic concentration, pH, sulfite to hematite molar ratio and the reaction time on the UV/hematite/sulfite (UHS) performance was evaluated. UV alone, UV/hematite (α-Fe₂O₃) (UH) and UV/sulfite (US) processes indicated to have little influence on the ciprofloxacin degradation. The simultaneous presence of hematite and sulfite in the reaction environment was significantly improved the degradation efficiency, as UHS process indicated an increase of 89%, 64% and 59% in the removal performance than that of UV alone, UH and US processes, respectively. Under the selected condition (pH of 7.0 and sulfite/hematite molar ratio of 1:3), 94% of ciprofloxacin (CFX) was degraded after 5 min of reaction. In addition, r_{obs (}mg L^-1 min) value for UHS process was 25.26, 6 and 4.8 times that of UV alone, UH and US processes, respectively. The EEO and TCS values for UV alone, US, UH and UHS processes were (44.21 kWh/m^-3 and 2.08 $ m^-3), (10.5 kWh/m^-3 and 1.1 $ m^-3), (4.8 kWh/m^-3 and 1.04 $ m^-3) and (1.75 kWh/m^-3 and 0.85 $ m^-3), respectively. In addition, the study of the reaction mechanism showed hydroxyl and sulfate radicals play a vital role in the degradation of CFX by UHS process.

Enhanced Metal Ion Rejection by a Low-Pressure Microfiltration System Using Cellulose Filter Papers Modified with Citric Acid

Energy consumption is always a major issue hindering the universal application of membrane-based filtration system. We herein demonstrated a low-energy-consumption microfiltration system that can be operated under ambient pressure while a great metal ion rejection rate (>95%) accompanied by a high permeate flux (100 L/m²h) was concurrently reached. This achievement was closely correlated to the enhanced metal ion adsorption by grafted carboxyl groups at the cellulose filter paper through esterification. Adsorbed metal ions consequently enhanced Donnan exclusion effect and therefore high rejection rate was achieved. Rejection rate of modified membrane was strongly correlated to the formation constant of associated carboxyl group to metal ions. Our results would be important for developing low-energy-consumption filtration systems for water and wastewater treatment application.

Hydrogenated hematite nanostructures for high-efficiency solar water oxidation

Hematite with oxygen vacancies can lower the onset potential and achieve a high photocurrent of 2.00 mA cm⁻² at 1.0 V_RHE.

Thin Water Films at Multifaceted Hematite Particle Surfaces

Mineral surfaces exposed to moist air stabilize nanometer- to micrometer-thick water films. This study resolves the nature of thin water film formation at multifaceted hematite (α-Fe2O3) nanoparticle surfaces with crystallographic faces resolved by selected area electron diffraction. Dynamic vapor adsorption (DVA) in the 0-19 Torr range at 298 K showed that these particles stabilize water films consisting of up to 4-5 monolayers. Modeling of these data predicts water loadings in terms of an "adsorption regime" (up to 16 H2O/nm(2)) involving direct water binding to hematite surface sites, and of a "condensation regime" (up to 34 H2O/nm(2)) involving water binding to hematite-bound water nanoclusters. Vibration spectroscopy identified the predominant hematite surface hydroxo groups (-OH, μ-OH, μ3-OH) through which first layer water molecules formed hydrogen bonds, as well as surface iron sites directly coordinating water molecules (i.e., as geminal η-(OH2)2 sites). Chemometric analyses of the vibration spectra also revealed a strong correspondence in the response of hematite surface hydroxo groups to DVA-derived water loadings. These findings point to a near-saturation of the hydrogen-bonding environment of surface hydroxo groups at a partial water vapor pressure of ∼8 Torr (∼40% relative humidity). Classical molecular dynamics (MD) resolved the interfacial water structures and hydrogen bonding populations at five representative crystallographic faces expressed in these nanoparticles. Simulations of single oriented slabs underscored the individual roles of all (hydro)oxo groups in donating and accepting hydrogen bonds with first layer water in the "adsorption regime". These analyses pointed to the preponderance of hydrogen bond-donating -OH groups in the stabilization of thin water films. Contributions of μ-OH and μ3-OH groups are secondary, yet remain essential in the stabilization of thin water films. MD simulations also helped resolve crystallographic controls on water-water interactions occurring in the "condensation regime". Water-water hydrogen bond populations are greatest on the (001) face, and decrease in importance in the order (001) > (012) ≈ (110) > (014) ≫ (100). Simulations of a single (∼5 nm × ∼ 6 nm × ∼ 6 nm) nanometric hematite particle terminated by the (001), (110), (012), and (100) faces also highlighted the key roles that sites at particle edges play in interconnecting thin water films grown along contiguous crystallographic faces. Hydroxo-water hydrogen bond populations showed that edges were the preferential loci of binding. These simulations also suggested that equilibration times for water binding at edges were slower than on crystallographic faces. In this regard, edges, and by extension roughened surfaces, are expected to play commanding roles in the stabilization of thin water films. Thus, in focusing on the properties of nanometric-thick water layers at hematite surfaces, this study revealed the nature of interactions between water and multifaced particle surfaces. Our results pave the way for furthering our understanding of mineral-thin water film interfacial structure and reactivity on a broader range of materials.

Synergistic contributions by decreasing overpotential and enhancing charge-transfer in α-Fe2O3/Mn3O4/graphene catalysts with heterostructures for photocatalytic water oxidation

Proposed mechanism of oxygen evolution from α-Fe₂O₃/Mn₃O₄-1/rGO-3 photocatalyst.