Barbituric acid-based magnetic N-halamine nanoparticles as recyclable antibacterial agents

High-efficacy antimicrobial acyclic N-halamine-grafted polyvinyl alcohol film

With N,N'-methylenebisacrylamide (MBA) and polyvinyl alcohol (PVA) as raw materials, a polymer (PVA-MBA) containing N-halamine precursor functional groups was obtained via grafting reaction between the active hydroxyl groups on PVA and α, β-unsaturated functional groups of MBA under the catalysis of sodium carbonate in an aqueous solution. An acyclic N-halamine precursor-grafted PVA (MBA-PVA) film was formed by simply spreading PVA-MBA aqueous solution in a glass dish and drying it. An antimicrobial acyclic N-halamine-grafted PVA (PVA-MBA-Cl) film was achieved by spraying the diluted sodium hypochlorite solution onto the surface of PVA-MBA film. The performance test of PVA-MBA-Cl film under the optimal preparation conditions showed that the tensile performance and the hydrophobicity were improved, compared to the PVA film. The storage stability test indicated that the oxidative chlorine content Cl+ (atoms/cm2) of the as-prepared PVA-MBA-Cl film only reduced by 14.3% after storage for 9 weeks, showing that the antibacterial N-halamine functional groups in PVA-MBA-Cl film has excellent storage stability under room temperature. Antibacterial test showed that the PVA-MBA-Cl film had very strong antibacterial efficacies and could completely kill 1.28 × 106 CFU/mL S. aureus and 1.89 × 106 CFU/mL E. coli within 1 min. Therefore, PVA-MBA-Cl film will have more potential applications in food package.

A Polysiloxane Delivery Vehicle of Cyclic N-Halamine for Biocidal Coating of Cellulose in Supercritical CO2

Cyclic N-halamines are highly antimicrobial, very stable, and not susceptible to bacterial resistance. A polysiloxane delivery vehicle was synthesized to deliver cyclic imide N-halamine onto cellulose via a benign and universal procedure that does not require a harmful solvent or chemical bonding. In brief, Knoevenagel condensation between barbituric acid and 4-hydroxybenzaldehyde furnished 5-(4-hydroxybenzylidene)pyrimidine-2,4,6-trione, whose phenolic O-H was subsequently reacted with the Si-H of poly(methylhydrosiloxane) (PMHS) via silane alcoholysis. The product of silane alcoholysis was interpenetrated into cellulose in supercritical CO₂ (scCO₂) at 50 °C, to form a continuous modification layer. The thickness of the modification layer positively correlated with interpenetration pressure in the experimental range of 10 to 28 MPa and reached a maximum value of 76.5 nm, which demonstrates the ability for tunable delivery, to control the loading of the imide N-H bond originating from barbituric acid unit. The imide N-H bonds on cellulose with the thickest modifier were then chlorinated into N-Cl counterparts using tert-butyl hypochlorite, to exert a powerful biocidability, providing ~7 log reductions of both S. aureus and E. coli in 20 min. The stability and rechargeability of the biocidability were both very promising, suggesting that the polysiloxane modifier has a satisfactory chemical structure and interlocks firmly with cellulose via scCO₂ interpenetration.

In vitro evaluation of the anticancer activity of barbituric/thiobarbituric acid-based chromene derivatives

BACKGROUND

Cancer is one of the most important reasons for mortality worldwide. Several synthetic products have shown valuable efficiency as an anticancer medicines. Chromene derivatives have long been used as the promising compounds which are potent in inhibition of the growth of tumors.

METHODS AND RESULTS

In this study, we investigate an anticancer activity of barbituric/thiobarbituric acid-based chromene derivates. For this purpose, viability, antioxidant and apoptotic assays were conducted using three different cancer cell lines (A2780, MCF7, and A549). In most cases, the antiproliferative activity of barbituric acid-based derivatives was higher than that of thiobarbituric acid-based compounds. Among 14 compounds, compound 4g was the most potent one, which showed the highest effect on cells by increasing the accumulation of ROS (up to 540% increase), increasing the level of caspase-3 and caspase-9 (~ 35% increase), and decreasing the mitochondrial membrane potential (2.5 folds reduction). To characterize the type of cell death involved into our experiment Annexin V/PI double staining of compound 4g was performed. The results showed that the number of late apoptotic and/or necrotic cells (Ann V + /PI +) increased fourfold upon treatment with IC₅₀ concentration of 4g.

CONCLUSIONS

Overall, the anti-proliferative activity of barbituric acid-based derivatives was higher than that of thiobarbituric acid compounds, and compound 4g can be introduced as a potential candidate to prevent various cancers.

A novel surface imprinted resin for the selective removal of metal-complexed dyes from aqueous solution in batch experiments: ACB GGN as a representative contaminant

Metal-complexed dyes are harmful to the environment and human health because they contain heavy metals and complex organic ligands. It is difficult to separate and recover these dyes from wastewater owing to their complex components and poor selectivity of common adsorbents. In this study, a novel surface molecularly imprinted polymer (SMIP) was prepared using 4-vinyl pyridine as the functional monomer and polystyrene resin as the carrier. SMIP showed better adsorption performance than non-imprinted polymer (SNIP) in the whole pH range with the best adsorption capacity at pH 1.5. The correlation coefficients (R²) fitted by Langmuir and Temkin models were greater than 0.97, and the adsorption was a spontaneous exothermic process. The pseudo-second-order and Elovich models fitted the adsorption kinetic curves well. The adsorption capacity of SMIP was approximately 20% higher than that of SNIP in the salt concentration ranging from 2 to 80 mg/L. In selective adsorption experiments, the relative selectivity coefficients (I) of SMIP for competitors were all greater than 2.41, and the Cr (Ⅲ) components of ACB GGN played a more important role in the recognition performance of SMIP than the sulfonic groups. Adsorption mechanism tests revealed that although the adsorption of ACB GGN by SMIP mainly relied on electrostatic attraction, hydrophobic interactions, π-π conjugation, and Cr (Ⅲ) coordination were also involved. These results show that SMIP has excellent selective adsorption properties for ACB GGN and a promising application potential in the treatment of metal-complexed dye wastewater.

An N-Halamine/Graphene Oxide-Functionalized Electrospun Polymer Membrane That Inactivates Bacteria on Contact and by Releasing Active Chlorine

The emergence of antibiotic-resistant "superbugs" in recent decades has led to widespread illness and death and is a major ongoing public health issue. Since traditional antimicrobials and antibiotics are in many cases showing limited or no effectiveness in fighting some emerging pathogens, there is an urgent need to develop and explore novel antibacterial agents that are both powerful and reliable. Combining two or more antibiotics or antimicrobials has become a hot topic in antibacterial research. In this contribution, we report on using a simple electrospinning technique to create an N-halamine/graphene oxide-modified polymer membrane with excellent antibacterial activity. With the assistance of advanced techniques, the as-obtained membrane was characterized in terms of its chemical composition, morphology, size, and the presence of active chlorine. Its antibacterial properties were tested with Escherichia coli (E. coli) as the model bacteria, using the colony-counting method. Interestingly, the final N-halamine/graphene oxide-based antibacterial fibrous membrane inactivated E. coli both on contact and by releasing active chlorine. We believe that the synergistic antimicrobial action of our as-fabricated fibrous membrane should have great potential for utilization in water disinfection, air purification, medical and healthcare products, textile products, and other antibacterial-associated fields.

Cow dung-derived biochars engineered as antibacterial agents for bacterial decontamination

Disposal of the pollutants arising from farming cattle and other livestock threatens the environment and public safety in diverse ways. Herein, we report on the synthesis of engineered biochars using cow dung as raw material, and investigating these biochars as antibacterial agents for water decontamination. By coating the biochars with N-halamine polymer and loading them with active chlorine (i.e., Cl⁺), we were able to regulate them on demand by tuning the polymer coating and bleaching conditions. The obtained N-halamine-modified biochars were found to be extremely potent against Escherichia coli and Staphylococcus aureus. We also investigated the possibility of using these N-halamine-modified biochars for bacterial decontamination in real-world applications. Our findings indicated that a homemade filter column packed with N-halamine-modified biochars removed pathogenic bacteria from mining sewage, dairy sewage, domestic sewage, and artificial seawater. This proposed strategy could indicate a new way for utilizing livestock pollutants to create on-demand decontaminants.

Facile and green synthesis of decatungstate-based nickel(ii) complex coated onto modified Fe3O4 nanoparticles with enhanced antimicrobial activity against antibiotic-resistant bacteria

A nanostructured Fe₃O₄@PDA@Ni-DT composite was successfully prepared with high-efficiency antibacterial properties and excellent recyclable performance.

Antibacterial N-halamine fibrous materials

Pathogenic microbial contamination poses serious threats to human healthcare and economies worldwide, which instigates the booming development of challenging antibacterial materials. N-halamine fibrous materials (NFMs), as an important part of antibacterial materials, featuring structural continuity, good pore connectivity, rapid sterilization, rechargeable bactericidal activity, and safety to humans and environment, have received significant research attention. This review aims to present a systematic discussion of the recent advances in N-halamine antibacterial fibrous materials. We firstly introduce the chemical structures and properties of N-halamine materials. Subsequently, the developed NFMs can be categorized based on their fabrication strategies, including surface modification and one-step spinning. Then some representative applications of these fibrous materials are highlighted. Finally, challenges and future research directions of the materials are discussed in the hope of giving suggestions for the following studies.

•

The chemical structures and properties of N-halamine materials are briefly introduced.

•

Design and fabrication strategies of N-halamine fibrous materials are systematically reviewed.

•

The functional applications of the N-halamine fibrous materials are discussed.

•

Challenges and future research directions of the antibacterial N-halamine fibrous materials are provided.

A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials

As the most abundant biopolymer on the earth, cellulose has recently gained significant attention in the development of antibacterial biomaterials. Biodegradability, renewability, strong mechanical properties, tunable aspect ratio, and low density offer tremendous possibilities for the use of cellulose in various fields. Owing to the high number of reactive groups (i.e., hydroxyl groups) on the cellulose surface, it can be readily functionalized with various functional groups, such as aldehydes, carboxylic acids, and amines, leading to diverse properties. In addition, the ease of surface modification of cellulose expands the range of compounds which can be grafted onto its structure, such as proteins, polymers, metal nanoparticles, and antibiotics. There are many studies in which cellulose nano-/microfibrils and nanocrystals are used as a support for antibacterial agents. However, little is known about the relationship between cellulose chemical surface modification and its antibacterial activity or biocompatibility. In this study, we have summarized various techniques for surface modifications of cellulose nanostructures and its derivatives along with their antibacterial and biocompatibility behavior to develop non-leaching and durable antibacterial materials. Despite the high effectiveness of surface-modified cellulosic antibacterial materials, more studies on their mechanism of action, the relationship between their properties and their effectivity, and more in vivo studies are required.

Bactericidal and antifouling electrospun PVA nanofibers modified with a quaternary ammonium salt and zwitterionic sulfopropylbetaine

Bacterial adhesion and colonization on material surfaces have attracted great attention due to their potential threat to human health. Combining bactericidal and antifouling functions has been confirmed as an optimal strategy to prevent microbial infection. In this work, biodegradable electrospun polyvinyl alcohol (PVA) nanofibers were chosen due to its high specific area and abundant reactive hydroxyl groups. A quaternary ammonium salt (IQAS) and zwitterionic sulfopropylbetaine (ISB), both containing isocyanate (NCO) groups, were chemically bonded to the PVA nanofiber surface via a coupling reaction between the OH groups of the PVA nanofibers and the NCO groups of IQAS or ISB. The results indicated that the antimicrobial rates of PVA nanofibers modified by IQAS (0.5%) reached 99.9% against both gram-positive Staphylococcus aureus (S. aureus, ATCC 6538) and gram-negative Escherichia coli (E. coli, ATCC 25922). Additionally, the live/dead staining and cytotoxicity test indicated that the dual functional IQAS/ISB/PVA nanofibers exhibited excellent bactericidal and antifouling activities with low cytotoxicity. This work may provide practical guidelines to fabricate bactericidal and antifouling materials for healthcare applications, including but not limited to wound dressings, textile, food packaging and air filtration.

Novel composite unit with one pyridinium and three N-halamine structures for enhanced synergism and superior biocidability on magnetic nanoparticles

A novel composite unit of enhanced synergism that rises from the use of a cationic pyridinium structure to attract anionic bacteria to three N-halamine structures was designed for superior biocidability on recyclable magnetic nanoparticles. Briefly, 5-(4-hydroxybenzylidene)hydantoin (HBH), containing one imide and amide NH bonds, was synthesized by Knoevenagel condensation ofp-hydroxybenzaldehyde with hydantoin. 3-Triethoxysilylpropyl succinic anhydride was ammonolyzed with 4-aminopyridine to introduce a pyridine structure and form an amide NH and a carboxylic acid group that was esterified with HBH to introduce its two NH bonds. The triethoxysilyl groups of the esterification product were hydrolyzed into silanols to condense with the counterparts of different hydrolysates and on silica modified Fe₃O₄nanoparticles to provide a layer of polymeric modifier. After quaternization of the pyridine and chlorination of NH bonds from each esterification product, the resultant layer is composed of units each of which contains one pyridinium and threeN-halamine sites and exerted higher biocidability against Escherichia coli and Staphylococcus aureus than comparable systems including synergistic ones with one cationic center and one N-halamine, demonstrating an enhanced synergism. The biocidal layer had promising stability under quenching-chlorinating cycles and long-term storage. The study affords a strategy for syntheses of more powerful biocidal surfaces.

Enhanced UV stability of N-halamine-immobilized Fe3O4@SiO2@TiO2 nanoparticles: synthesis, characteristics and antibacterial property

Recycling of N-halamine-modified Fe₃O₄@SiO₂@TiO₂ antibacterial materials with UV stability.

Engineering of antibacterial/recyclable difunctional nanoparticles via synergism of quaternary ammonia salt site and N-halamine sites on magnetic surface

A biocidal composite unit with improved synergism, using one cationic quaternary ammonia salt (QAS) site to attract electronegative bacteria to three highly biocidal N-halamine sites, was designed for the first time and attached onto surface of magnetic silica coated Fe₃O₄ nanoparticles (silica@Fe₃O₄NPs) for superior biocidability, large killing area, and easy recyclability. Briefly, a compound containing one imide and two amide NH bonds, 2-(2,5-dioxoimidazolidin-4-yl)-N-(4-hydroxyphenyl)acetamide (DHPA), was prepared by amidation of hydantoin acetic acid with p-aminophenol. A biocidal precursor of one QAS site and three N-halamine sites was then constructed by alcoholysis of 3-triethoxysilylpropyl succinic anhydride with 2-(dimethylamino)ethan-1-ol to introduce a tertiary amine and subsequent esterification with DHPA to introduce three NH bonds. The triethoxysilyl groups in the precursor were hydrolyzed to silanol groups to condense with their counterparts on silica@Fe₃O₄ NPs. The surface of resultant NPs carried units each contains one QAS site and three N-halamine sites after quaternization and chlorination. The biocidal surface showed superior biocidability against Escherichia coli and Staphylococcus aureus than reported systems due to the improved synergism between multiple antibacterial groups of different types and was stable towards quenching-chlorinating process and storage. The successful design opens insight in the syntheses of more powerful biocides.

Electrospun Sesbania Gum-Based Polymeric N-Halamines for Antibacterial Applications

Microorganism pollution induced by pathogens has become a serious concern in recent years. In response, research on antibacterial N-halamines has made impressive progress in developing ways to combat this pollution. While synthetic polymer-based N-halamines have been widely developed and in some cases even commercialized, N-halamines based on naturally occurring polymers remain underexplored. In this contribution, we report for the first time on a strategy for developing sesbania gum (SG)-based polymeric N-halamines by a four-step approach Using SG as the initial polymer, we obtained SG-based polymeric N-halamines (abbreviated as cSG-PAN nanofibers) via a step-by-step controllable synthesis process. With the assistance of advanced techniques, the as-synthesized cSG-PAN nanofibers were systematically characterized in terms of their chemical composition and morphology. In a series of antibacterial and cytotoxicity evaluations, the as-obtained cSG-PAN nanofibers displayed good antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as low cytotoxicity towards A549 cells. We believe this study offers a guide for developing naturally occurring polymer-based antibacterial N-halamines that have great potential for antibacterial applications.

Designing Melittin-Graphene Hybrid Complexes for Enhanced Antibacterial Activity

Antimicrobial peptides (AMPs) promise a fundamental solution to the devastating threat of drug-resistant bacteria. However, drawbacks of AMPs (e.g., poor cell membrane penetration efficiency) seriously block their clinical use. In this work, rational design of a hybrid complex of melittin (as a representative AMP) and graphene or graphene oxide (Gra or GO) nanosheets for enhanced antibacterial ability is achieved, via combining in-silico prediction and in-tube test. In comparison to pristine melittin, the specifically designed AMP-Gra (/GO) complex exhibits remarkable efficiency in transmembrane perforation with an over tenfold decrease in the threshold working concentration of peptide; moreover, it has an up to 20-fold enhancement in antibacterial activity against both Gram-negative and Gram-positive bacteria. Such improvement is ascribed to the synergetic insertion of nanosheets and melittin due to similarity in antibacterial mechanism between them and is further regulated by the structural factors of the complex, including the intersheet spacing and surface functionalization of the Gra/GO sheets, etc. These results provide practical guidelines to engineer AMPs with nanotechnology for improved antimicrobial performances, especially based on targeted functionalization of the Gra/GO nanosheets.

Sesbania Gum-Supported Hydrophilic Electrospun Fibers Containing Nanosilver with Superior Antibacterial Activity

In this contribution, we report for the first time on a new strategy for developing sesbania gum-supported hydrophilic fibers containing nanosilver using electrospinning (SG-Ag/PAN electrospun fibers), which gives the fibers superior antibacterial activity. Employing a series of advanced technologies-scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, UV-visible absorption spectroscopy, X-ray photoelectron spectroscopy, and contact angle testing-we characterized the as-synthesized SG-Ag/PAN electrospun fibers in terms of morphology, size, surface state, chemical composition, and hydrophilicity. By adjusting the synthesis conditions, in particular the feed ratio of sesbania gum (SG) and polyacrylonitrile (PAN) to Ag nanoparticles (NPs), we regulated the morphology and size of the as-electrospun fibers. The fibers' antibacterial properties were examined using the colony-counting method with two model bacteria: Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium). Interestingly, compared to Ag/PAN and SG-PAN electrospun fibers, the final SG-Ag/PAN showed enhanced antibacterial activity towards both of the model bacteria due to the combination of antibacterial Ag NPs and hydrophilic SG, which enabled the fibers to have sufficient contact with the bacteria. We believe this strategy has great potential for applications in antibacterial-related fields.

Construction of Antibacterial N-Halamine Polymer Nanomaterials Capable of Bacterial Membrane Disruption for Efficient Anti-Infective Wound Therapy

The increasing occurrence of bacterial infection at the wound sites is a serious global problem, demanding the rapid development of new antibacterial materials for wound dressing to avoid the abuse of antibiotics and thereby antibiotic resistance. In this work, the authors first report on antibacterial N-halamine polymer nanomaterials based on a strategic copolymerization of 3-allyl-5,5-dimethylhydantoin (ADMH) and methyl methacrylate (MMA), which exhibits in vitro and in vivo antimicrobial efficacy against pathogenic bacteria including Staphylococcus aureus and Escherichia coli. Particularly, when a biological evaluation is run for wound therapy, the N-halamine polymer nanomaterials exhibit a powerful antibacterial efficiency and wound healing ability after a series of histological examination of mouse wound. After the evaluation of biological and chemical surroundings, the proposed four-stage mechanism suggests that, with unique antibacterial NCl bonds, the N-halamine polymer nanomaterials can disrupt the bacterial membrane, as a result causing intracellular content leaked out and thereby cell death. Based on the synergistic action of antibacterial and wound therapy, the N-halamine polymer nanomaterials are expected to be promising as wound dressing materials in medical healing and biomaterials.

Povidone-iodine-functionalized fluorinated copolymers with dual-functional antibacterial and antifouling activities

Povidone-iodine-functionalized fluorinated polymer coatings with dual-functional antibacterial and antifouling activities should be very promising in practical biomedical applications.

Microenvironment-Responsive Magnetic Nanocomposites Based on Silver Nanoparticles/Gentamicin for Enhanced Biofilm Disruption by Magnetic Field

Biofilms contribute to persistent bacterial infections as well as formidable resistances to conventional antibiotics. However, it is still a major challenge to establish an advanced antibacterial nanoplatform that can efficiently eradicate biofilms while overcoming bacterial resistances. Taking advantage of the stimuli-responsive technique and the magnetic guidance strategy, here we present a highly efficient nanoplatform for planktonic inactivation and biofilm disruption. The multilayer films consisting of antibiotic gentamicin (Gen), tannic acid, and silver nanoparticles (AgNPs) were fabricated and coated on magnetic nanoparticles via electrostatic interactions. To achieve controlled drug release and improved biocompatibility, biodegradable hyaluronic acid was capped on the outer surface as a responsive shell. In vitro release profiles suggested that the nanocomposites showed both enzyme and pH-responsive release properties. The nanoplatform could be employed as a powerful nanocarrier for small molecular Gen and AgNPs delivery and on-demand release in response to bacterial infection microenvironment. The nanocomposites also showed satisfying antibacterial capacities against planktonic Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Intriguingly, with magnetic field navigation (NdFeB, 2000 gauss), the nanocomposites could be guided to handily penetrate into S. aureus biofilm and performed dual-responsive release, showing significantly enhanced biofilm disruption. Moreover, excess reactive oxygen species production resulting from the nanocomposites contributed to the decomposition of biofilm matrix and ultimate biofilm eradication. As a consequence, the ingenious antibacterial nanoplatform could be promising for combating biofilm infections while overcoming bacterial resistances with extra environmental factors such as magnetic field.

Progress of recyclable magnetic particles for biomedical applications

The preparation, types, recycling methods, biomedical applications and outlook of recyclable magnetic particles have been reviewed.

Controllable synthesis Fe3O4@POHABA core-shell nanostructure as high-performance recyclable bifunctional magnetic antimicrobial agent

We demonstrated a method to form magnetic antimicrobial POHABA (poly-N,N'-[(4,5-dihydroxy-1,2-phenylene)bis(methylene)]bisacrylamide)-based core-shell nanostructure by free-radical polymerization of OHABA on the Fe₃O₄ core surface. The magnetic antimicrobial agent Fe₃O₄@POHABA can be used in domestic water treatment against bacterial pathogens. The thickness of POHABA shell could be controlled from 10.4 ± 1.2 to 56.3 ± 11.7 nm by the dosage of OHABA. The results of antimicrobial-activity test indicated that POHABA-based core-shell nanostructure had broad-spectrum inhibitory against Gram-negative, Gram-positive bacteria and fungi. The minimum inhibitory concentration (MIC) values of Fe₃O₄@POHABA nanostructure against Escherichia coli and Bacillus subtilis were both 0.4 mg/mL. Fe₃O₄@POHABA nanostructures responded to a permanent magnet and were easily recycled. Fe₃O₄@POHABA nanoparticles retained 100% antimicrobial efficiency for both Gram-negative and Gram-positive bacteria throughout eight recycle procedures.

Polyanionic Antimicrobial Membranes: An Experimental and Theoretical Study

Polycationic polymers have been widely used as antimicrobial materials because of their broad spectrum activity and potential use as new antibiotics. Herein, we report the synthesis of polyanionic antimicrobial membranes by in situ photo-cross-linking of a sulfate based anionic monomer, followed by cation-exchange with organic (quaternary ammonium or imidazolium) or metal (Ag⁺, Cu²⁺, Fe³⁺, Zn²⁺, Na⁺, K⁺) cations. The resultant polyanionic membranes show high and broad spectrum antibacterial activities against both bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans ). In addition, the polyanionic antimicrobial membranes efficiently inhibited the formation of biofilms by SC5314 and its crk1 gene deleted (Δcrk1) C. albicans strains. Furthermore, the synthesized polyanionic membranes exhibit good blood compatibility, low cytotoxicity and long-term antibacterial stability, demonstrating safe antimicrobial materials in the application of healthcare.

N-Halamine-Containing Electrospun Fibers Kill Bacteria via a Contact/Release Co-Determined Antibacterial Pathway

N-Halamine-based antibacterial materials play a significant role in controlling microbial contamination, but their practical applications are limited because of their complicated synthetic process and indistinct antibacterial actions. In this study, novel antibacterial N-halamine-containing polymer fibers were synthesized via an one-step electrospinning of N-halamine-containing polymers without any additives. By adjusting the concentration of precursor and the molecular weight of polymers, the morphology and size of the as-spun N-halamine-containing fibers can be regulated. The as-spun fibers showed antibacterial activity against both Gram-positive and Gram-negative bacteria. After an antibacterial assessment using different biochemical techniques, a combined mechanism of contact/release co-determined killing action was evidenced for the as-spun N-halamine-containing fibers. With the aid of contact action and/or release action, this combined mechanism can allow N-halamines to attack bacteria, making the as-spun fibers wide in the application of antibacterial fields, whatever it is in dry or wet environment. Also, a recycle antibacterial test demonstrated that the as-spun fibers can still offer antibacterial property after five recycle experiments.

Engineering of Superparamagnetic Core-Shell Iron Oxide/N-Chloramine Nanoparticles for Water Purification

In this study, we describe the synthesis and characterization of superparamagnetic core-shell iron oxide (IO)/N-halamine antibacterial nanoparticles (NPs). For this purpose, superparamagnetic IO core NPs were coated with cross-linked polymethacrylamide (PMAA) by surfactant-free dispersion copolymerization of methacrylamide and N,N-methylenebis(acrylamide) in an aqueous continuous phase. The effect of the polymerization process on the chemical composition, size, shape, crystallinity, and magnetic properties of the IO/PMAA NPs was elucidated. Conversion of the core-shell IO/PMAA NPs into their N-halamine form, IO/PMAA-Cl, was accomplished using a chlorination reaction with sodium hypochlorite. The influence of chlorination on the shape, crystallinity, and magnetic properties of the IO/PMAA NPs was studied. The IO/PMAA-Cl NPs demonstrated excellent antibacterial activity against Gram-negative and Gram-positive bacteria. Finally, the chlorination recharging capabilities of the NPs and their potential for use in the purification of water containing bacteria were demonstrated with magnetic columns packed with the IO/PMAA-Cl NPs.

Chain-like Fe3O4@resorcinol-formaldehyde resins–Ag composite microstructures: facile construction and applications in antibacterial and catalytic fields

Chain-like Fe₃O₄@RF–Ag microstructures with excellent antibacterial and catalytic activities were constructed by a simple two-step route.

Cytocompatible antibacterial fibrous membranes based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and quaternarized N-halamine polymer

A novel polymeric N-halamine-containing quaternary ammonium salt (PHQS) was synthesized and used to make antibacterial electrospun fibrous membranes by blending with biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-4HB)).

Quaternized N-chloramine coated magnetic nanoparticles: a trifecta of superior antibacterial activity, minimal residual toxicity and rapid site removal

Applying nanoscience and nanotechnology to potentially allow the safe use of potent broad-spectrum biocides on topical wounds.

Facile synthesis of N-halamine-labeled silica-polyacrylamide multilayer core-shell nanoparticles for antibacterial ability

Silica-polymer antimicrobial composites with a core-shell nanostructure are often prepared through a polymeric process. However, it is difficult to control the polymerization degree of the polymers to give a uniform size distribution. In this article, we present a facile approach to produce antimicrobial silica@polyacrylamide (SiO₂@PAM) core-shell nanoparticles, which were synthesized via an electrostatic self-assembly method using acyclic N-halamine polymeric polyacrylamide. The morphologies and structures of these as-prepared nanoparticles were characterized by different techniques. And their antibacterial performance against both Gram-positive bacteria and Gram-negative bacteria was also evaluated. Based on the preliminary results, these core-shell nanosized spheres were made of an outer polymer shell which decorated the inner SiO₂ core, showing the encapsulation of silica nanoparticles with PAM polymers. After chlorination, the resultant nanosized particles displayed a powerful and stable bactericidal capability toward both of the two model bacterial species. Bactericidal assessment further suggested a coordinated effect of the well-known antibacterial performance of N-halamines and the flocculation of PAM on the antibacterial behavior. The in vitro cytotoxicity of the prepared nanoparticles with varying concentrations was studied using mouse fibroblast cells (L929). The CCK-8 assay revealed that the SiO₂@PAM composites possessed a non-cytotoxic and favorable response to the seeded cells in vitro. These results indicate the suitability of the SiO₂@PAM composite particles for controlling biocidal activity, demonstrating their potential applications in deactivating bacteria or even disease control.

Unexpected Enhancement in Antibacterial Activity of N-Halamine Polymers from Spheres to Fibers

Preventing bacterial infections is a main focus of medical care. Antibacterial agents with broad and excellent disinfection capability against pathogenic bacteria are in fact urgently required. Herein, a novel strategy for the development of N-halamine polymers from spheres to fibers using a combined copolymerization-electrospinning-chlorination technique was reported, allowing fight against bacterial pathogen. Optimizing the process conditions, e.g., comonomer molar ratio, concentration of electrospinning solution, chlorination order, and chlorination period, resulted in the formation of N-halamine fibers with controllable morphology. N-Halamine polymers were tested against two common bacterial pathogens, Escherichia coli and Staphylococcus aureus, and were found to be extremely potent against both bacteria, suggesting that they possess powerful sterilizing properties. Remarkably, compared with those with sphere morphology, N-halamine fibers show unexpected enhancement toward both pathogens possibly because of their shape (fiber morphology), surface state (rough surfaces), and surface charge (positive zeta potentials). It is believed that this approach has great potential to be utilized in various fields where antifouling and antibacterial properties are highly required.

Decorating CdTe QD-Embedded Mesoporous Silica Nanospheres with Ag NPs to Prevent Bacteria Invasion for Enhanced Anticounterfeit Applications

Quantum dots (QDs) as potent candidates possess advantageous superiority in fluorescence imaging applications, but they are susceptible to the biological circumstances (e.g., bacterial environment), leading to fluorescence quenching or lose of fluorescent properties. In this work, CdTe QDs were embedded into mesoporous silica nanospheres (m-SiO2 NSs) for preventing QD agglomeration, and then CdTe QD-embedded m-SiO2 NSs (m-SiO2/CdTe NSs) were modified with Ag nanoparticles (Ag NPs) to prevent bacteria invasion for enhanced anticounterfeit applications. The m-SiO2 NSs, which serve as intermediate layers to combine CdTe QDs with Ag NPs, help us establish a highly fluorescent and long-term antibacterial system (i.e., m-SiO2/CdTe/Ag NSs). More importantly, CdTe QD-embedded m-SiO2 NSs showed fluorescence quenching when they encounter bacteria, which was avoided by attaching Ag NPs outside. Ag NPs are superior to CdTe QDs for preventing bacteria invasion because of the structure (well-dispersed Ag NPs), size (small diameter), and surface charge (positive zeta potentials) of Ag NPs. The plausible antibacterial mechanisms of m-SiO2/CdTe/Ag NSs toward both Gram-positive and Gram-negative bacteria were established. As for potential applications, m-SiO2/CdTe/Ag NSs were developed as fluorescent anticounterfeiting ink for enhanced imaging applications.

Evaluation of Novel Antibacterial N-Halamine Nanoparticles Prodrugs towards Susceptibility of Escherichia coli Induced by DksA Protein

Novel N-halamine nanoparticles potentially useful for killing pathogenic bacteria, i.e., SiO2@PS/N-halamine NPs, were successfully synthesized via the immobilization of N-halamines onto the polystyrene-coated silica nanoparticles (SiO2@PS NPs). The effect of reaction conditions, i.e., chlorination temperature, bleaching concentration, chlorination time, on the oxidative chlorine content in the products was systematically investigated. The antibacterial activity of the products was tested via the modified plate counting methd using Escherichia coli (E. coli) as a model bacterium. The possible mechanism of the antibacterial action of the products was also studied using scanning electron microscopy combined with a inhibition zone study. The antimicrobial capability of the products was well controlled by tuning the oxidative chlorine content in the products. More importantly, the role of DksA protein in the susceptibility of E. coli against the products was proven using a time-kill assay. This in-depth investigation of the sensitivity of E. coli towards N-halamine NPs provides a systematic understanding of the utility of N-halamines for deactivating bacteria or even disease control.

Synthesis of antibacterial and magnetic nanocomposites by decorating graphene oxide surface with metal nanoparticles

Simple method for preparation of Ag NPs and GO + IO + Ag nanocomposites using cinnamon extract developed. The nanocomposites developed are magnetic and as effective as Ag NPs against bacteria and are cheaper due to less amount of Ag.

Synthesis and bactericidal evaluation of imide N-halamine-loaded PMMA nanoparticles

Antibacterial imide N-halamine-loaded PMMA nanoparticles were fabricated, and their bactericidal activities were systematically evaluated.

Poly(N-acryloyl ciprofloxacin-co-acrylic acid) grafted magnetite nanoparticles for microbial decontamination of collagen solution: have we conquered the problem of antimicrobial residues?

A strategy to avoid antimicrobial residues in decontaminated collagen solution is provided.