Highly sensitive detection of caspase-3 activities via a nonconjugated gold nanoparticle-quantum dot pair mediated by an inner-filter effect

A Comprehensive Exploration of Caspase Detection Methods: From Classical Approaches to Cutting-Edge Innovations

The activation of caspases is a crucial event and an indicator of programmed cell death, also known as apoptosis. These enzymes play a central role in cancer biology and are considered one promising target for current and future advancements in therapeutic interventions. Traditional methods of measuring caspase activity such as antibody-based methods provide fundamental insights into their biological functions, and are considered essential tools in the fields of cell and cancer biology, pharmacology and toxicology, and drug discovery. However, traditional methods, though extensively used, are now recognized as having various shortcomings. In addition, these methods fall short of providing solutions to and matching the needs of the rapid and expansive progress achieved in studying caspases. For these reasons, there has been a continuous improvement in detection methods for caspases and the network of pathways involved in their activation and downstream signaling. Over the past decade, newer methods based on cutting-edge state-of-the-art technologies have been introduced to the biomedical community. These methods enable both the temporal and spatial monitoring of the activity of caspases and their downstream substrates, and with enhanced accuracy and precision. These include fluorescent-labeled inhibitors (FLIs) for live imaging, single-cell live imaging, fluorescence resonance energy transfer (FRET) sensors, and activatable multifunctional probes for in vivo imaging. Recently, the recruitment of mass spectrometry (MS) techniques in the investigation of these enzymes expanded the repertoire of tools available for the identification and quantification of caspase substrates, cleavage products, and post-translational modifications in addition to unveiling the complex regulatory networks implicated. Collectively, these methods are enabling researchers to unravel much of the complex cellular processes involved in apoptosis, and are helping generate a clearer and comprehensive understanding of caspase-mediated proteolysis during apoptosis. Herein, we provide a comprehensive review of various assays and detection methods as they have evolved over the years, so to encourage further exploration of these enzymes, which should have direct implications for the advancement of therapeutics for cancer and other diseases.

Switch-on Fluorescence Analysis of Protease Activity with the Assistance of a Nickel Ion-Nitrilotriacetic Acid-Conjugated Magnetic Nanoparticle

Heterogeneous protease biosensors show high sensitivity and selectivity but usually require the immobilization of peptide substrates on a solid interface. Such methods exhibit the disadvantages of complex immobilization steps and low enzymatic efficiency induced by steric hindrance. In this work, we proposed an immobilization-free strategy for protease detection with high simplicity, sensitivity and selectivity. Specifically, a single-labeled peptide with oligohistidine-tag (His-tag) was designed as the protease substrate, which can be captured by a nickel ion-nitrilotriacetic acid (Ni-NTA)-conjugated magnetic nanoparticle (MNP) through the coordination interaction between His-tag and Ni-NTA. When the peptide was digested by protease in a homogeneous solution, the signal-labeled segment was released from the substrate. The unreacted peptide substrates could be removed by Ni-NTA-MNP, and the released segments remained in solution to emit strong fluorescence. The method was used to determine protease of caspase-3 with a low detection limit (4 pg/mL). By changing the peptide sequence and signal reporters, the proposal could be used to develop novel homogeneous biosensors for the detection of other proteases.

Disposable biosensor based on novel ternary Ru-PEI@PCN-333(Al) self-enhanced electrochemiluminescence system for on-site determination of caspase-3 activity

The number of death due to cancer-related diseases each year is at the alarming level and is constantly growing. Tools that can effectively and conveniently detect cancer cell apoptosis can play a significant role in cancer research, cancer therapy, and other related industries. Herein, we fabricated, for the first time, an ultrasensitive, disposable, self-enhanced off-on electrochemiluminescence (ECL) biosensor based on ternary Ru-PEI@PCN-333(Al) system to determine caspase-3 activity, the biomarker of apoptosis. The biosensor had a low detection limit of 0.017 pg/mL and was able to enhance the ECL emission and stability. A solid-state (SS) ECL strategy was adopted to overcome the relatively weak ECL emission due to the long distance between electrochemiluminophore and electrode surface. The analysis requires only one incubation step, which can significantly reduce the operational complexity and time. The biosensor had higher sensitivity, and the off-on ECL mode was achieved using caspase-3 as a switch. The on-site and rapid detection capability of the biosensor was achieved by the introduction of disposable screen-printed electrodes (SPEs). This study lays a foundation for the development of more advanced, ingenious, portable and reliable ECL devices for biosensing not only caspase-3, but also other bioanalytes.

Recent developments on carbon dots-based green analytical methods: New opportunities in fluorescence assay of pesticides, drugs and biomolecules

Fluorescent carbon dots (CDs) grabs huge attention in analytical and bioanalytical applications due to their high selectivity towards target analyte, specificity, photostability, and quantum yield. Cost-effective and biocompatible properties of...

Designing of various biosensor devices for determination of apoptosis: A comprehensive review

Apoptosis is a type of cell death caused by the occurrence of both pathological and physiological conditions triggered by ligation of death receptors outside the cell or triggered by DNA damage and/or cytoskeleton disruption. Timely monitoring of apoptosis can effectively help early diagnosis of related diseases and continuous assessment of the effectiveness of drugs. Detecting caspases, a protease family closely related to cellular apoptosis, and its identification as markers of apoptosis is a popular procedure. Biosensors are used for early diagnosis and play a very important role in preventing disease progression in various body sections. Recently, there has been a widespread increase in the desire to use materials made of paper (e.g. nitrocellulose membrane) for Point-of-Care (POC) testing systems since paper and paper-like materials are cheap, abundant and degradable. Microfluidic paper-based analytical devices (μPADs) are highly promising as they are cost-effective, easy to use, fast, precise and sustainable over time and under different environmental conditions. In this review, we focused our efforts on compiling the different approaches on identifying apoptosis pathway while giving brief information about apoptosis and biosensors. This review includes recent advantages in biosensing techniques to simply determine what happened in the cell life and which direction it would continue. As a conclusion, we believed that the review may help to researchers to compare/update the knowledge about diagnosis of the apoptosis pathway while reminding the basic definitions about the apoptosis and biosensor technologies.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Nanostructures for Biosensing, with a Brief Overview on Cancer Detection, IoT, and the Role of Machine Learning in Smart Biosensors

Biosensors are essential tools which have been traditionally used to monitor environmental pollution and detect the presence of toxic elements and biohazardous bacteria or virus in organic matter and biomolecules for clinical diagnostics. In the last couple of decades, the scientific community has witnessed their widespread application in the fields of military, health care, industrial process control, environmental monitoring, food-quality control, and microbiology. Biosensor technology has greatly evolved from in vitro studies based on the biosensing ability of organic beings to the highly sophisticated world of nanofabrication-enabled miniaturized biosensors. The incorporation of nanotechnology in the vast field of biosensing has led to the development of novel sensors and sensing mechanisms, as well as an increase in the sensitivity and performance of the existing biosensors. Additionally, the nanoscale dimension further assists the development of sensors for rapid and simple detection in vivo as well as the ability to probe single biomolecules and obtain critical information for their detection and analysis. However, the major drawbacks of this include, but are not limited to, potential toxicities associated with the unavoidable release of nanoparticles into the environment, miniaturization-induced unreliability, lack of automation, and difficulty of integrating the nanostructured-based biosensors, as well as unreliable transduction signals from these devices. Although the field of biosensors is vast, we intend to explore various nanotechnology-enabled biosensors as part of this review article and provide a brief description of their fundamental working principles and potential applications. The article aims to provide the reader a holistic overview of different nanostructures which have been used for biosensing purposes along with some specific applications in the field of cancer detection and the Internet of things (IoT), as well as a brief overview of machine-learning-based biosensing.

Stimuli-Responsive Plasmonic Assemblies and Their Biomedical Applications

Among the diverse development of stimuli-responsive assemblies, plasmonic nanoparticle (NP) assemblies functionalized with responsive molecules are of a major interest. In this review, we outline a comprehensive and up-to-date overview of recently reported studies on in vitro and in vivo assembly/disassembly and biomedical applications of plasmonic NPs, wherein stimuli such as enzymes, light, pH, redox potential, temperature, metal ions, magnetic or electric field, and/or multi-stimuli were involved. Stimuli-responsive assemblies have been applied in various biomedical fields including biosensors, surfaced-enhanced Raman scattering (SERS), photoacoustic (PA) imaging, multimodal imaging, photo-activated therapy, enhanced X-ray therapy, drug release, stimuli-responsive aggregation-induced cancer therapy, and so on. The perspectives on the use of stimuli-responsive plasmonic assemblies are discussed by addressing future scientific challenges involving assembly/disassembly strategies and applications.

Spectrofluorimetric determination of Cr(VI) and Cr(III) by quenching effect of Cr(III) based on the Cu-CDs with peroxidase-mimicking activity

The study presents a spectrofluorimetric method for the determination of Cr(III) based on 2,3-diaminophenazine (DAP) as fluorescent nano sensor. With the peroxidase-mimicking activity of copper-doped carbon dots (Cu-CDs), colorless o-phenylenediamine (OPD) was oxidized to fluorescent DAP in the presence of H₂O₂ via generation of hydroxyl radicals. The Cr(III) was found to decrease the fluorescent intensity of the Cu-CDs-mediated OPD oxidation system. Cr(VI) species were reduced to Cr(III) by employing 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) as the reductant, and a novel spectrofluorimetric method for the highly sensitive detection of speciation Cr(VI) and Cr(III) was developed. The Cu-CDs nanozyme was prepared from ethylenediaminetetraacetic acid copper disodium salt (Na₂[Cu (EDTA)]) by one-step pyrolysis method. Under optimal conditions, the fluorescence intensity of DAP is linearly proportional to the Cr(III) ion concentration in the range of 5 × 10^-6 to 1.5 × 10^-4 mol L^-1 and the detection limit is 1.2 × 10^-7 mol L^-1. The method has a good anti-interference performance against some metal ions, such as, Hg²⁺, Co²⁺, Cu²⁺, Mg²⁺, Ba²⁺, K⁺, Mn²⁺, Ni²⁺, Al³⁺, and Fe³⁺. The proposed method was successfully applied in the determination of Cr(VI) and Cr(III) in water samples.

Universal Platform for Ratiometric Sensing Based on Catalytically Induced Inner-Filter Effect by Cu2

Integrating two kinds of fluorescent probes in one system to develop a ratiometric sensing platform is of prime importance for achieving an accurate assay. Inspired by the efficient overlapped spectrum of 2-aminoterephthalic acid (PTA-NH₂) and 2,3-diaminophenazine (DAP), a new sensitive ratiometric fluorescent sensor has been developed for Cu²⁺ on the basis of in situ converting o-phenylenediamine (OPD) into DAP through the catalysis of Cu²⁺. Here, the presence of Cu²⁺ induced the emission of DAP, which acted as an energy acceptor to inhibit the emission of PTA-NH₂. This dual-emission reverse change ratiometric profile based on the inner-filter effect improved sensitivity and accuracy, and the highly sensitive determination of Cu²⁺ with a detection limit of 1.7 nmol·L^-1 was obtained. The proposed sensing platform displayed the wide range of detection of Cu²⁺ from 5 to 200 nmol·L^-1 by modulating the reaction time between Cu²⁺ and OPD. Moreover, based on the specific interaction between glutathione (GSH) and Cu²⁺, this fluorescent sensor showed high response toward GSH in a range of 0.5-80 μmol·L^-1 with a detection limit of 0.16 μmol·L^-1. The successful construction of this simple ratiometric sensing platform without the participation of enzymes provides a new route for the detection of small biological molecules that are closely related to human health.

Metal-Enhanced Fluorescence by Bifunctional Au Nanoparticles for Highly Sensitive and Simple Detection of Proteolytic Enzyme

Although fluorescence-based analytical methods have been used in intracellular analyses, their sensitivity is low for the precise analysis of intracellular proteolytic enzymes to observe cell apoptosis related to cancer and neurodegenerative diseases. In this study, a metal-enhanced-fluorescence (MEF)-based highly sensitive biosensor for the detection of proteolytic enzymes is proposed for the first time by using a bifunctional Au nanoparticle (AuNP), which is connected to the fluorophore by both single-stranded DNA (ssDNA) and a peptide. Once caspase-3, a proteolytic enzyme, cuts the peptide specifically, the fluorescence signal is drastically increased because the ssDNA maintains an optimal distance for the MEF. The proposed sensing method shows the highly sensitive detection of caspase-3 based on just a simple enzymatic cleavage reaction within 1 h, and caspase-3-related preapoptotic cell detection was successfully carried out with high sensitivity. The proposed sensing method is a rapid, simple, and one-step technique for the real-time monitoring of intracellular proteolytic enzymes and can be applied to the early diagnosis of cancer and neurodegenerative diseases.

Fast Activation and Tracing of Caspase-3 Involved Cell Apoptosis by Combined Electrostimulation and Smart Signal-Amplified SERS Nanoprobes

Caspase-3 is considered as one of the key proteases that can spontaneously regulate the life activities of cells, and its activation (usually is a slow process) will execute the apoptosis process of cells. Rapid activation of caspase-3 on demand in living-cells is therefore highly desired toward precise cancer therapy but it is still a key challenge. Herein, we applied electrostimulus (ES) to achieve fast activation of caspase-3 and trigger cell apoptosis, and developed a smart magnetic-plasmonic assembly nanoprobes (A-nanoprobes) to real-time trace cellular caspase-3 activation at the single cell level. The designer core-satellite A-nanoprobe, working specific to the activated caspase-3 via a disassembly tactic, provides strong "hot spots" to improve the sensitivity and therefore enables SERS sensing of cellular caspase-3 upon activated by ES. Single-cell analysis revealed that the ES can rapidly activate the apoptosis pathway of caspase-3 on demand to make the DNA fragmentation and ultimately induce the cell apoptosis. Such method and nanoplatform were further used to monitor ES-triggered caspase-3 activation in cell apoptosis process of different cell types, revealing that more caspase-3 will be activated for cancerous cells than normal cells during the ES to induce cells apoptosis. This strategy and platform are promising for detecting cellular caspase-3 and other enzymes in the process of cancer diagnosis and treatments.

Ratiometric Fluorescent Quantum Dot-Based Biosensor for Chlorothalonil Detection via an Inner-Filter Effect

A new sensitive sensor for detecting chlorothalonil (CHL) based on the inner-filter effect (IFE) between gold nanoparticles (AuNPs) and ratiometric fluorescent quantum dots (RF-QDs) was developed. Here, RF-QDs were designed by two different color CdTe QDs. Based on the IFE, the AuNPs can quench the fluorescence of the RF-QDs. Because of the electrostatic attraction between protamine (PRO) and the AuNPs, the PRO can restore fluorescence effectively. Papain (PAP) can easily hydrolyze PRO and causes the quench of fluorescence quenching. The addition of CHL can inhibit PAP activity and restore the fluorescent signal. Through the characterization of the structural changes of PAP, the inhibition and mechanism of CHL on PAP activity were studied. The ability of CHL to inhibit PAP activity was evaluated by measuring the fluorescence of the RF-QDs. Under the optimal conditions, this sensing platform shows a response to CHL in the range of 0.34-2320 ng/mL and a detection limit of 0.0017 ng/mL. Based on the CHL inhibition of PAP activity, the RF-QDs showed good selectivity for CHL. The practical application of the proposed system was demonstrated by detecting CHL in food and environmental samples with satisfying results.

Cell membrane-coated gold nanoparticles for apoptosis imaging in living cells based on fluorescent determination

A nanoprobe was developed to achieve apoptosis detection by cell membrane-functionalized gold nanoparticles (AuNP-pep@Mem). The fluorescence of the fluorescein isothiocyanate isomer I (FITC)-labeled caspase-3 substrates was quenched by the attachment to AuNPs. The fluorescence signal was recovered via the cleavage of caspase-3 under apoptotic conditions. It exhibited a low detection limit of 1.3 pg·mL^-1 with a linear range from 3.2 to 100 pg·mL^-1 for caspase-3 detection with excitation wavelength of 490 nm. After wrapped by the cell membrane, the nanoprobe was effectively delivered into cells with high cell permeability. AuNP-pep@Mem nanoprobe provided signal enhancement of 1.8 times in living cells compared to non-membrane-coated nanoparticles (AuNP-pep). In combination with its excellent stability, low LOD and good specificity, the AuNP-pep@Mem probe can be an ideal probe for fluorescence imaging of apoptosis. Graphical abstractSchematic representation of fluorescent determination for apoptosis in living cells based on cell membrane-coated gold nanoparticls.

Fluorescence-tunable copper nanoclusters and their application in hexavalent chromium sensing

Generally, metal nanoclusters are synthesized using only a single ligand. Thus, the properties and applications of these nanomaterials are limited by the nature of the ligand used. In this study, we have developed a new synthetic strategy to prepare bi-ligand copper nanoclusters (Cu NCs). These bi-ligand Cu NCs are synthesized from copper ions, thiosalicylic acid, and cysteamine by a simple one-pot method, and they exhibit high quantum yields (>18.9%) and good photostability. Most interestingly, the fluorescence intensities and surface properties of the Cu NCs can be tailored by changing the ratio of the two ligands. Consequently, the bi-ligand Cu NCs show great promise as fluorescent probes. Accordingly, the Cu NCs were applied to the inner-filter-effect-based detection of hexavalent chromium in water. A wide linear range of 0.1–1000 μM and a low detection limit (signal-to-noise ratio = 3) of 0.03 μM was obtained. The recoveries for the real sample analysis were between 98.3 and 105.0% and the relative standard deviations were below 4.54%, demonstrating the repeatability and practical utility of this assay.

Generally, metal nanoclusters are synthesized using only a single ligand.

Sensitive detection of caspase-3 enzymatic activities and inhibitor screening by mass spectrometry with dual maleimide labelling quantitation

There is a great need to develop sensitive and specific methods for quantitative analysis of caspase-3 activities in cell apoptosis.

Highly photoluminescent and temperature-sensitive P, N, B-co-doped carbon quantum dots and their highly sensitive recognition for curcumin

Temperature-sensitive P, N, B-co-doped carbon quantum dots (PNBCDs) synthesized using one-pot method exhibit many excellent features, such as strong fluorescence, good stability and sensitive detection for curcumin.

AuNP-peptide probe for caspase-3 detection in living cells by SERS

Colloidal nanoparticles can be used as surface-enhanced Raman scattering (SERS) substrates because the very close spacing between particles existing in these colloidal systems is beneficial for the generation of extremely strong and highly spatially localized electric field enhancements. Herein, a caspase-3-specified peptide was used as a molecular cross-linker to engineer gold nanoparticle (AuNP) junctions in a controllable manner. The peptide was designed with a sequence of CCALNNPFFDVED (Cys-Cys-Ala-Leu-Asn-Asn-Pro-Phe-Phe-Asp-Val-Glu-Asp) or CCALNNKYDDVED (Cys-Cys-Ala-Leu-Asn-Asn-Lys-Tyr-Asp-Asp-Val-Glu-Asp), where the CALNN (Cys-Ala-Leu-Asn-Asn) fragment helps to stabilize AuNP suspension in aqueous media and the sequence of DVED (Asp-Glu-Val-Asp) can be cleaved by caspase-3. In addition, the PFF (Pro-Phe-Phe) or KYD (Lys-Tyr-Asp) was exposed and interacted via the hydrophobic or alternate negative and positive electro-interaction in the presence of caspase-3, inducing the aggregation of colloidal Au-peptides accompanied with the enhancement of SERS. It can be observed that the SERS-enhanced signals were correlated with the caspase-3 concentrations and the limit of detection can reach 1.5 ng mL^-1. Finally, this caspase-3-specified AuNP-peptide probe has been found to be a promising candidate for its application in the analysis of caspase-3 in living cells.

Analyte-triggered cyclic autocatalytic oxidation amplification combined with an upconversion nanoparticle probe for fluorometric detection of copper(II)

The authors describe an upconversion nanoparticle-based (UCNP-based) fluorometric method for ultrasensitive and selective detection of Cu²⁺. The UCNPs show a strong emission band at 550 nm under near-infrared excitation at 980 nm. The principle of the strategy is that gold nanoparticles (AuNP) can quench the fluorescence of UCNP. In contrast, the addition of L-cysteine (Cys) can induce the aggregation of AuNP, resulting in a fluorescence recovery of the UCNPs. On addition of Cu²⁺, it oxidizes Cys to cystine and is reduced to Cu⁺. The Cu⁺ thusformed can be oxidized cyclically to Cu²⁺ by dissolved O₂, which catalyzes and recycles the whole reaction. Thus, the aggregation of AuNP is inhibited and the fluorescence recovered by Cys is quenched. Under the optimal condition, the quenching efficiency shows a good linear response to the concentrations of Cu²⁺ in the 0.4-40 nM range. The limit of detection is 0.16 nM, which is 5 orders of magnitude lower than the U.S. Environmental Protection Agency limit for Cu²⁺ in drinking water (20 μM). The method has been further applied to monitor Cu²⁺ levels in real samples. The results of detection are well consistent with those obtained by atomic absorption spectroscopy. Graphical abstract Gold nanoparticles (AuNP) as a high efficient fluorescence quenching reagent of upconversion nanoparticles (UCNP) were used in a fluorometric method for detection of Cu²⁺ based on a cyclic catalytic oxidation amplification strategy.

Advances in nanomaterial based optical biosensing and bioimaging of apoptosis via caspase-3 activity: a review

Caspase-3 plays a vital role in intrinsic and extrinsic pathways of programed cell death and in cell proliferation. Its detection is an important tool for early detection of some cancers and apoptosis-related diseases, and for monitoring the efficacy of pharmaceuticals and of chemo- and radiotherapy of cancers. This review (with 72 references) summarizes nanomaterial based methods for signal amplification in optical methods for the determination of caspase-3 activity. Following an introduction into the field, a first large section covers optical assays, with subsections on luminescent and chemiluminescence, fluorometric (including FRET based), and colorimetric assays. Further section summarize methods for bioimaging of caspase-3. A concluding section covers current challenges and future perspectives. Graphical Abstract ᅟ.

Detection of Sudan Dyes Based on Inner-Filter Effect with Reusable Conjugated Polymer Fibrous Membranes

Developing effective methods for detecting illegal additives in food or seasoning is of great significance. In this study, a sensing strategy for selective detection of Sudan dyes was designed based on the fluorescence inner-filter effect (IFE) by using poly(phenylenevinylene) (PPV) solid materials in combination with an optimized experimental protocol. Two types of fluorescent solid materials, electrospun fibrous membranes and drop-cast films, were fabricated with PPV as the fluorophore and poly(vinyl alcohol) as the matrix, respectively. Sudan dyes greatly quenched the fluorescence of the membrane and film, whereas other food colorings or possible food ingredients displayed a much smaller or negligible quenching effect. The sensing mechanism was studied, and the selectivity was ascribed to IFE, which requires the overlap between the absorption of the analyte and absorption/emission of the sensing material. The form of materials (membrane or film), the content of PPV, and the cross-linking process did not have much influence on the selectivity and sensitivity, which is consistent with the IFE mechanism and demonstrates the advantage of not requiring strict control of the preparative process. All the cross-linked materials were found to be stable against water/humidity and displayed good reversibility in sensing and can be reused at least for 10 cycles with negligible influence on the sensing performance. A cross-linked membrane was selected for detecting Sudan dyes in chili powder because folding did not affect the mechanical stability of the membrane. Two different protocols were used to pretreat the chili samples, which allowed the detection of Sudan dyes in chili powder as well as the discrimination of Sudan dyes from synthetic food coloring such as allura red. This study provides a facile and cost-effective method for preparing reusable sensing materials for detecting some dyes in commercial foods or food seasonings.

An upconversion nanoparticle-based fluorescence resonance energy transfer system for effectively sensing caspase-3 activity

We report a new fluorescence resonance energy transfer (FRET) sensing platform for the sensitive detection of caspase-3 activity in vitro and in cells using NaGdF₄:Yb³⁺,Er³⁺@NaGdF₄ upconversion nanoparticles (UCNPs) as the energy donor and Rhodamine B (RB) as the energy acceptor. The phosphorylated RB-modified peptide containing a caspase-3 cleavage site and cell-penetrating peptide (CPP) motif (sequence, (RB)-DEVDGGS(p)GCGT(p)GRKKRRQRRRPQ) is immobilized on the UCNP surface via the strong coordination interaction between Gd³⁺ ions with phosphate. After the cleavage of DEVD by caspase-3, the RB is released from the UCNP surface and the reduced upconversion luminescence (UCL) is recovered. Under the optimum conditions, the recovery ratio of the UCL is linearly dependent on the caspase-3 concentration within the range of 0.01 to 1000 pg mL^-1 and with a limit of detection (LOD) of 0.01 pg mL^-1 (S/N = 3). In particular, the as-proposed UCNP-based FRET sensing platform has reasonable selectivity which is successfully employed to monitor caspase-3 activity in drug-induced apoptosis of HeLa cells.

Phosphorescent inner filter effect-based sensing of xanthine oxidase and its inhibitors with Mn-doped ZnS quantum dots

Large bandgap semiconductor ZnS QDs (Mn-doped) were explored for inner filter effect-based sensing of xanthine oxidase and its inhibitors, due to the maximum spectral overlap between the absorption of uric acid (the enzymatic product of xanthine oxidase) and the excitation of Mn-doped ZnS QDs.

N-doped carbon dots as a fluorescent probe for the sensitive and facile detection of carbamazepine based on the inner filter effect

N-doped carbon dots are used as a fluorescent probe for the sensitive and facile determination of carbamazepine based on the inner filter effect.

Development of quantum dot-based biosensors: principles and applications

We review the recent advances in quantum dot-based biosensors and focus on quantum dot-based fluorescent, bioluminescent, chemiluminescent, and photoelectrochemical biosensors.

Highly Sensitive Ratiometric Fluorescent Sensor for Trinitrotoluene Based on the Inner Filter Effect between Gold Nanoparticles and Fluorescent Nanoparticles

In this work, we developed a simple and sensitive ratiometric fluorescent assay for sensing trinitrotoluene (TNT) based on the inner filter effect (IFE) between gold nanoparticles (AuNPs) and ratiometric fluorescent nanoparticles (RFNs), which was designed by hybridizing green emissive carbon dots (CDs) and red emissive quantum dots (QDs) into a silica sphere as a fluorophore pair. AuNPs in their dispersion state can be a powerful absorber to quench CDs, while the aggregated AuNPs can quench QDs in the IFE-based fluorescent assays as a result of complementary overlap between the absorption spectrum of AuNPs and emission spectrum of RFNs. As a result of the fact that TNT can induce the aggregation of AuNPs, with the addition of TNT, the fluorescent of QDs can be quenched, while the fluorescent of CDs would be recovered. Then, ratiometric fluorescent detection of TNT is feasible. The present IFE-based ratiometric fluorescent sensor can detect TNT ranging from 0.1 to 270 nM, with a detection limit of 0.029 nM. In addition, the developed method was successfully applied to investigate TNT in water and soil samples with satisfactory recoveries ranging from 95 to 103%, with precision below 4.5%. The simple sensing approach proposed here could improve the sensitivity of colorimetric analysis by changing the ultraviolet analysis to ratiometric fluorescent analysis and promote the development of a dual-mode detection system.

Inner filter effect-based fluorescent sensing systems: A review

Inner filter effect (IFE) was previously considered as an error in fluorescence measurement. In recent years, it has been developed as an important non-irradiation energy conversion model of spectroscopic technique and found wide applications in the fields of chemical sensing and biosensing. In comparison with traditional techniques based on forster resonance energy transfer (FRET), the IFE-based fluorescent approach is more flexible and straightforward without the link of absorber with fluorescer. The present review for the first time introduces the state of the art in the progress of the IFE-based fluorescent sensing systems, including sensing strategy, essential conditions, materials option, and their applications for the detection of various target analytes, e.g., ionic species, small molecules, and macromolecules. In addition, the benefits and limitations of the IFE-based fluorescent sensing systems are also critically discussed and highlighted.

Exploring the tunable excitation of QDs to maximize the overlap with the absorber for inner filter effect-based phosphorescence sensing of alkaline phosphatase

The inner filter effect (IFE) is an effective way for fluorescence modulation and thus has been extensively explored for the development of fluorescence assays. Theoretically, the key to maximize the sensitivity of IFE-based fluorescence assays is to enlarge the overlap between the absorption of the absorber and the excitation/emission of the fluorophore. Therefore, in this work, the tunable excitation of quantum dots (QDs) was explored for screening of the IFE pair having the best IFE-based assay sensitivity. A series of QDs, including CdTe QDs with different sizes, carbon dots, Cu-doped CdS QDs, and Mn-doped ZnS QDs, were investigated. PNPP (p-nitrophenylphosphate) was chosen as the absorber since its absorption overlapped with the above QDs. Besides, it can be catalytically converted to p-nitrophenol (PNP) by alkaline phosphatase (ALP) together with an absorption spectrum change (red-shift). Interestingly, it was found that the IFE efficiency of different PNPP-QD pairs increased almost linearly with the corresponding spectral overlap, and Mn-doped ZnS QDs were eventually chosen for the IFE assay of ALP because of the maximum spectral overlap and thus the best sensitivity. A simple and sensitive turn-on phosphorescence ALP assay was developed, with a detection limit of 4 × 10^-4 U L^-1. Because of the high sensitivity, we also found that ALP of different origins possessed different enzymatic activities. The developed ALP phosphorescence assay was successfully employed for the analysis of ALP in serum samples.

Highly Fluorescent Polyimide Covalent Organic Nanosheets as Sensing Probes for the Detection of 2,4,6-Trinitrophenol

A new fluorescent polyimide covalent organic framework (PI-COF) has been successfully synthesized through solvothermal route using tetra(4-aminophenyl) porphyrin and perylenetracarboxylic dianhydride, which possesses porous crystalline and excellent thermal stability (>500 °C). Furthermore, few-layered PI covalent organic nanosheets (PI-CONs) can be easily obtained from the fluorescent PI-COF through a facile liquid phase exfoliation approach, which were confirmed by atomic force microscopy and transmission electron microscopy analysis. It is interesting that the fluorescent intensity of PI-CONs is obviously enhanced relative to that of PI-COF. The PI-CONs have been successfully utilized as an efficient fluorescent probe for the highly sensitive and selective detection of 2,4,6-trinitrophenol (TNP). The mechanism might be attributed to the combination of electron transfer and inner filter effect based on DFT calculations and spectral overlap data. The system exhibits a good linear response toward TNP over the range from 0.5 to 10 μM with a detection limit of 0.25 μM.

A Turn-On Fluorescent Sensor for Selective and Sensitive Detection of Alkaline Phosphatase Activity with Gold Nanoclusters Based on Inner Filter Effect

In this work, a novel approach for simple and sensitive determination of alkaline phosphatase (ALP) is developed on the basis of an inner filter effect of p-nitrophenylphosphate (PNPP) on the fluorescence of gold nanoclusters (AuNCs). AuNCs with a high quantum yield of 12% were synthesized by one-pot strategy and were directly applied as fluorescent substance. When AuNCs were mixed with PNPP, the fluorescence of the AuNCs was remarkably quenched or was decreased via the inner filter effect since the absorption spectrum of PNPP overlaps well with the excitation spectrum of the AuNCs. While in the presence of ALP, PNPP was catalytically hydrolyzed into p-nitrophenol, which has different absorption characteristics from those of PNPP, resulting in the recovery of the AuNCs fluorescence. Thus, a novel "turn-on" fluorescent sensor for detecting ALP was established with a detection limit as low as 0.002 U/L (signal-to-noise ratio of 3). The turn-on fluorescent sensor exhibits many merits such as high sensitivity, excellent selectivity, and high signal output because of the low background signals. In addition, the developed sensing method was successfully applied to investigate ALP inhibitors and ALP determination in serum samples. A good linear relationship was obtained in the range from 0.02 to 50 U/L, and satisfactory recoveries at four spiking levels of ALP ranged from 95% to 106% with precision below 5%. The very simple sensing approach proposed here should promote the development of fluorescence turn-on chemosensors for chemo/biodetection.

Sensitive fluorescent detection of fibrin based on the inner filter effect of gold nanoparticles

A simple, rapid and sensitive fluorescent assay for determination of fibrin has been developed based on the inner filter effect (IFE) of gold nanoparticles (AuNPs).

Enhanced green fluorescence protein/layered double hydroxide composite ultrathin films: bio-hybrid assembly and potential application as a fluorescent biosensor

Protein immobilization is of significant interest for applications in biosensing, drug delivery and bioconversion, and challenges still remain for the in vitro immobilization and application of proteins. Due to it being non-specific to species, easy to express in cells and able to exhibit fluorescence after expression without the need for cofactors or chaperones, green fluorescent protein (GFP), together with its differently colored mutants, has been widely studied and applied. This article reports the fabrication of enhanced green fluorescent protein (EGFP)/layered double hydroxide nanosheet (EGFP/LDH)_n ultrathin films (UTFs) via a layer-by-layer assembly technique based on electrostatic and hydrogen-bond interactions, and this realized the immobilization of EGFP. The obtained UTFs show a long-range-ordered periodic layered stacking structure and strong fluorescence originating from EGFP, which also retains its predominant β-barrel structure well in the LDH laminates. The inorganic LDH laminates play an important role in protecting and improving the structure and properties of the EGFP in the UTFs. Furthermore, the UTFs exhibit a reversible fluorescence response between different pH environments or different wet or dry environments, and also could detect some small biological medicine molecules such as protoporphyrin, and thus they have the potential to be a novel type of biological fluorescence sensor.

Facile, green and clean one-step synthesis of carbon dots from wool: Application as a sensor for glyphosate detection based on the inner filter effect

In this work, we reported a green route for the fabrication of fluorescent carbon dots (CDs). Wool, a kind of nontoxic and natural raw material, was chosen as the precursor to prepare CDs via a one-step microwave-assisted pyrolysis process. Compared with previously reported methods for preparation of CDs based on biomass materials, this method was simple, facile and free of any additives, such as acids, bases, or salts, which avoid the complicated post-treatment process to purify the CDs. The CDs have a high quantum yield (16.3%) and their fluorescence could be quenched by silver nanoparticles (AgNPs) based on inner filter effect (IFE). The presence of glyphosate could induce the aggregation of AgNPs and thus result in the fluorescence recovery of the quenched CDs. Based on this phenomenon, we constructed a fluorescence system (CDs/AgNPs) for determination of glyphosate. Under the optimized conditions, the fluorescence intensity of the CDs/AgNPs system was proportional to the concentration of glyphosate in the range of 0.025-2.5μgmL(-1), with a detection limit of 12ngmL(-1). Furthermore, the established method has been successfully used for glyphosate detection in the cereal samples with satisfactory results.

Assembly of neutral conjugated polymers with layered double hydroxide nanosheets by the layer-by-layer method

This article reports that the neutral conjugated polymers (NCPs) can also be assembled with exfoliated MgAl-layered double hydroxide (LDH) nanosheets to form the ordered inorganic/organic hybrid ultrathin films via the LbL assembly technique.