Highly sensitive two-photon sensing of thrombin in serum using aptamers and silver nanoparticles

Catalytically active silver nanoparticles stabilized on a thiol-functionalized metal-organic framework for an efficient hydrogen evolution reaction

A post-synthetic technique, Solvent Assisted Ligand Incorporation (SALI), was used for thiol functionalization in the zirconium-based metal-organic framework NU-1000. This thiol-functionalized MOF was employed as a support for the growth of silver nanoparticles (Ag NPs) through coordination of a Ag(I) complex with a node-anchored thiol-ligand, followed by the reduction of Ag(I) to Ag(0). X-ray photoelectron spectroscopy revealed that the ratio of Ag(0) to Ag(I) proportionally increased with the loading of silver ions. The HER activity increased with the enhancement of Ag(0) in the system and the best efficiency was observed for the composite with ∼95% Ag(0). This composite displayed an overpotential of 165 mV in an acidic medium at 10 mA cm^-2 and a Tafel slope of 53 mA dec^-1. The loading of silver beyond the optimum value led to the aggregation of the particles which affected the overpotential substantially. The catalyst demonstrated appreciable static stability for 24 h, which promotes the use of the material as an HER catalyst. Therefore, these results emphasized that Ag NPs embedded onto a thiol-functionalized MOF is a propitious material for developing a clean and renewable energy source.

Photocatalytic redox on the surface of colloidal silver nanoparticles revealed by second harmonic generation and two-photon luminescence

The redox of silver on the surface of Ag nanoparticles (AgNPs) has received extensive attention because of its significant impact on the biological, physical and chemical properties of AgNPs and their applications. Here we demonstrate that the surface redox reaction of AgNPs in colloids may be investigated by the second harmonic generation (SHG) and two-photon luminescence (TPL) emission from the AgNPs. It was revealed that the oxidation of silver on the surface of AgNPs was accelerated upon femtosecond laser excitation, accompanied by a decrease in the SHG and TPL emissions from the AgNPs. The photon-induced reduction of oxidized silver on AgNPs and the formation of surface defects were also revealed by the changes in the SHG and TPL emissions. Size and morphology changes have not been detected by dynamic light scattering and TEM measurements. The changes in the UV-vis extinction spectra were also very weak compared with previous reports. However, the occurrence of redox reactions on the Ag surface upon femtosecond laser irradiation has been confirmed by multiple control experiments. This work demonstrates that SHG and TPL can sensitively probe the subtle structural change on the surface of AgNPs.

Novel Chemiluminescence Sensor for Thrombin Detection Based on Dual-Aptamer Biorecognition and Mesoporous Silica Encapsulated with Iron Porphyrin

Thrombin is a marker of blood-related diseases, and its detection is of great significance in the fields of medical and biological research. Herein, a novel chemiluminescence (CL) sensor for thrombin detection was prepared based on dual-aptamer biorecognition and mesoporous silica encapsulated with iron porphyrin. Mesoporous silica encapsulated with hematin by aptamer1 (Apt1/hematin/M-SiO₂) and magnetic microspheres modified with aptamer2 (Apt2/NH₂-MS) were successfully prepared, and the two materials were used to construct a CL sensor to detect thrombin. Primarily, Apt2/NH₂-MS is used for pretreatment separation of thrombin samples by the biorecognition effect between the aptamer (Apt2) and target (thrombin). Then, thrombin/Apt2/NH₂-MS is again recognized with Apt1 on the surface of Apt1/hematin/M-SiO₂ and Apt1/thrombin/Apt2/NH₂-MS is formed, so dual-aptamer biorecognition is realized. Meanwhile, the generated Apt1/thrombin/Apt2/NH₂-MS makes Apt1 shed off the surface of M-SiO₂ and release hematin. The released hematin can catalyze the luminol-H₂O₂ CL reaction. Therefore, a sandwich-type CL sensor was constructed based on dual-aptamer biorecognition and hematin catalysis for the detection of thrombin. The sensor has a linear range of 7.5 × 10^-15 to 2.5 × 10^-10 mol·L^-1 and a detection limit of 2.2 × 10^-15 mol·L^-1 and also exhibits excellent selectivity, reproducibility, and stability. The sensor was successfully used for the detection of thrombin in serum samples, which makes it possible to apply the sensor in the detection of thrombin in actual samples.

Noble Metal Nanostructured Materials for Chemical and Biosensing Systems

Nanomaterials with unique physical and chemical properties have attracted extensive attention of scientific research and will play an increasingly important role in the future development of science and technology. With the gradual deepening of research, noble metal nanomaterials have been applied in the fields of new energy materials, photoelectric information storage, and nano-enhanced catalysis due to their unique optical, electrical and catalytic properties. Nanostructured materials formed by noble metal elements (Au, Ag, etc.) exhibit remarkable photoelectric properties, good stability and low biotoxicity, which received extensive attention in chemical and biological sensing field and achieved significant research progress. In this paper, the research on the synthesis, modification and sensing application of the existing noble metal nanomaterials is reviewed in detail, which provides a theoretical guidance for further research on the functional properties of such nanostructured materials and their applications of other nanofields.

Aptamer-peptide conjugates as a new strategy to modulate human α-thrombin binding affinity

Aptamers are single-stranded RNA or DNA molecules that specifically recognize their targets and have proven valuable for functionalizing sensitive biosensors. α-thrombin is a trypsin-like serine proteinase which plays a crucial role in haemostasis and thrombosis. An abnormal activity or overexpression of this protein is associated with a variety of diseases. A great deal of attention was devoted to the construction of high-throughput biosensors for accurately detect thrombin for the early diagnosis and treatment of related diseases. Herein, we propose a new approach to modulate the interaction between α-thrombin and the aptamer TBA₁₅. To this end, TBA₁₅ was chemically conjugated to two peptide sequences (TBA-G₃FIE-Ac and TBA-G₃EIF-Ac) corresponding to a short fragment of the acidic region of the human factor V, which is known to interact directly with exosite I. Surface Plasmon Resonance (SPR) results showed enhanced analytical performances of thrombin with TBA-G₃EIF-Ac than with TBA wild-type, reaching a limit of detection as low as 44.9 pM. Electrophoresis mobility shift assay (EMSA) corroborated the SPR results. Molecular dynamics (MD) simulations support experimental evidences and provided further insight into thrombin/TBA-peptide interaction. Our findings demonstrate that the combination of TBA₁₅ with key interacting peptides offers good opportunities to produce sensitive devices for thrombin detection and potential candidates to block thrombin activity.

An "off-on" phosphorescent aptasensor for the detection of thrombin based on PRET

Thrombin plays an important role in the blood coagulation cascade and it stimulates the process of platelet aggregation. Herein, we developed a highly efficient and sensitive phosphorescent aptasensor system for the quantitative analysis of thrombin. The phosphorescence of 3-mercaptopropionic acid capped Mn-doped ZnS quantum dots (MPA-Mn:ZnS QDs) was gradually quenched with the addition of thrombin binding aptamers-BHQ2 (TBA-BHQ2) based on phosphorescence resonance energy transfer (PRET). With the addition of the target analyte thrombin into the system, TBA-BHQ2 could change its spatial structure from a random coil to an antiparallel G-quadruplex which resulted from the combination of thrombin and TBA-BHQ2, leading to the phosphorescence recovery. Finally, the concentration of thrombin could be accurately determined by means of measuring the phosphorescence intensity change value (ΔP). The limit of detection (LOD) was obtained as low as 15.26 pM with wide linear ranges both from 60 to 2000 pM and from 2 to 900 nM. The proposed strategy was also successfully applied for thrombin detection in human serum samples and plasma samples with satisfactory recoveries from 96% to 99% and 95% to 104%, respectively. The long lifetime of phosphorescent QDs possessed a suitable time delay to eliminate autofluorescence and scattered light interference from biological matrices effectively. Thus, the signal to noise ratio of the phosphorescent aptasensor was improved visibly for the analysis of target analytes.

Cu@Au(Ag)/Pt nanocomposite as peroxidase mimic and application of Cu@Au/Pt in colorimetric detection of glucose and l-cysteine

Nanomaterial-based artificial peroxidase has attracted extensive interests due to their distinct advantages over natural counterpart. Cu@Au/Pt and Cu@Ag/Pt nanocomposite with rambutan-like structure were prepared and discovered to function like peroxidase, which was illustrated by catalyzing the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine (TMB) accompanied with a blue color change. Steady-state investigation indicates that the catalytic kinetics of Cu@Au/Pt and Cu@Ag/Pt all followed typical Michaelis–Menten behaviors and Cu@Au/Pt showed a strong affinity for H₂O₂, while Cu@Ag/Pt showed strong affinity for TMB. The color change and absorbance intensity strongly depend on the concentration of H₂O₂, thus the direct determination of H₂O₂ and indirect detection of glucose were demonstrated using Cu@Au/Pt with a detection limit of 1.5 μM and 6 μM, respectively. What is more important, the method was applied for detection of glucose in 50% fetal bovine serum with a detection limit of 80 μM, which is much lower than the lowest glucose content in blood for diabetes (7 mM). Moreover, the Cu@Au/Pt nanocomposite were also successfully applied for sensing l-cysteine because of the inhibition effect. Considering the good peroxidase-like activity and novel structure, Cu@Au(Ag)/Pt is expected to have a wide range of applications in bioassays and biocatalysis.

Cu@Au(Ag)/Pt nanocomposite possess good peroxidase-like activity and can be used for detection of glucose and l-cysteine.

Target-programmed and autonomous proximity binding aptasensor for amplified electronic detection of thrombin

The development of sensitive and simple approaches capable of monitoring trace amounts of protein biomarkers is appealing for disease diagnosis and treatment. Towards this end, we have developed an electrochemical sensing platform for sensitive and simple detection of protein biomarkers by using thrombin as the model target molecules via a target-programmed proximity binding amplification approach. The binding of thrombin to the aptamer sequences in the partial dsDNA duplex probes induces the release of the ssDNA trigger strands, which catalyze subsequent assembly formation of many methylene blue (MB)-tagged proximate DNA motifs with the presence of the DNA fuel strands through cascaded toehold-mediated strand displacement reactions. Due to the proximity-binding effect, these MB-tagged proximate DNA motifs anneal with the capture probes on the sensor surface with significantly enhanced stability against the corresponding single component counterpart, thereby pulling the MB tags close to the sensor surface and generating substantially amplified signal responses for sensitive determination of thrombin down to 23.6 pM. In addition, such aptasensor can specifically discriminate thrombin from other interference proteins, and can also be utilized to monitor thrombin in diluted serum samples, demonstrating its great potential for sensitive determination of proteins for early disease diagnosis.

Metal Nanoparticles for Diagnosis and Therapy of Bacterial Infection

Infectious diseases caused by pathogenic bacteria, especially multidrug-resistant bacteria, and their global spreading have become serious public health concerns. Early diagnosis and effective therapy can efficiently prevent deterioration and further spreading of the infections. There is an urgent need for sensitive, selective, and facile diagnosis as well as therapeutically potent treatment. The emergence of nanotechnology has provided more options for diagnosis and treatments of bacterial infections. Metal nanoparticles and metal oxide nanoparticles have drawn intense attention owing to their unique optical, magnetic, and electrical properties. These versatile metal-based nanoparticles have great potential for selective detection of bacteria and/or therapy. This review gives an overview of recent efforts on developing various metal-based nanoparticles for bacterial detection and infection therapy. It begins with an introduction of fundamental concepts and mechanisms in designing diagnostic and therapeutic strategies. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. A brief discussion of challenges and perspective outlook in this field is provided at the end of this review.

Electrochemical aptasensor for thrombin using co-catalysis of hemin/G-quadruplex DNAzyme and octahedral Cu2O-Au nanocomposites for signal amplification

In this work, novel octahedral Cu₂O-Au nanocomposites were synthesized and first applied in an electrochemical aptasensor to detect thrombin (TB) with the aid of a DNAzyme for signal amplification. The octahedral Cu₂O-Au nanocomposites have not only simultaneously served as signal amplifying molecules but have also been utilized as an ideal loading platform to immobilize a large number of electroactive substances and recognition probes. Gold nanoparticles (AuNPs) were grown directly on the surface of the octahedral Cu₂O nanocrystals, and the Cu₂O-Au nanocomposites obtained had the advantages of large surface areas and excellent biocompatibilities. The hemin/G-quadruplex, which was formed by intercalating hemin into the amino terminated thrombin binding aptamer (NH₂-TBA), and the electroactive toluidine blue (Tb) were immobilized onto the Cu₂O-Au nanocomposite surfaces through a stable Au-N bond. AuNPs, Cu₂O and hemin/G-quadruplex co-catalyse the H₂O₂ in the working buffer to promote the electron transfer of Tb as a multiple signal amplification strategy in order to improve the performance of the electrochemical aptasensor. Under optimal conditions, the designed aptasensor exhibited sensitive detection of TB from 100 fM to 20nM with a lower detection limit of 23fM. This proposed aptasensor exhibited good sensitivity, high specificity and acceptable reproducibility and could be widely applied in bioassay analysis.

Novel application of fluorescence coupled capillary electrophoresis to resolve the interaction between the G-quadruplex aptamer and thrombin

The dynamic binding status between the thrombin and its G-quadruplex aptamers and the stability of its interaction partners were probed using our previously established fluorescence-coupled capillary electrophoresis method. A 29-nucleic acid thrombin binding aptamer was chosen as a model to study its binding affinity with the thrombin ligand. First, the effects of the cations on the formation of G-quadruplex from unstructured 29-nucleic acid thrombin binding aptamer were examined. Second, the rapid binding kinetics between the thrombin and 6-carboxyfluorescein labeled G-quadruplex aptamer was measured. Third, the stability of G-quadruplex aptamer-thrombin complex was also examined in the presence of the interfering species. Remarkably, it was found that the complementary strand of 29-nucleic acid thrombin binding aptamer could compete with G-quadruplex aptamer and thus disassociated the G-quadruplex structure into an unstructured aptamer. These data suggest that our in-house established fluorescence-coupled capillary electrophoresis assay could be applied to binding studies of the G-quadruplex aptamers, thrombin, and their ligands, while overcoming the complicated and costly approaches currently available.

Ultrasensitive Detection of Prostate-Specific Antigen and Thrombin Based on Gold-Upconversion Nanoparticle Assembled Pyramids

Self-assembled nanostructures have been used for the detection of numerous cancer biomarkers. In this study, a gold-upconversion-nanoparticle (Au-UCNP) pyramid based on aptamers is fabricated to simultaneously detect thrombin and prostate-specific antigen (PSA) using surface-enhanced Raman scattering (SERS) and fluorescence, respectively. The higher the concentration of thrombin, the lower the intensity of SERS. PSA connected with the PSA aptamer leads to an increase in fluorescence intensity. The limit of detection of thrombin and PSA reaches 57 × 10^-18 and 0.032 × 10^-18 m, respectively. In addition, the pyramid also exhibits great target specificity. The results of human serum target detection demonstrate that the Au-UCNP pyramid is an excellent choice for the quantitative determination of cancer biomarkers, and is feasible for the early diagnosis of cancer.

Copper and silver nanoparticles stabilized by bistriazole-based dendritic amphiphile micelles for 4-nitrophenol reduction

Copper and silver nanoparticles stabilized on dendritic amphiphiles catalyzed 4-nitrophenol reduction at the ppm level, with particle size influencing catalytic efficiency.

A sensitive sandwich-type electrochemical aptasensor for thrombin detection based on platinum nanoparticles decorated carbon nanocages as signal labels

In this work, a novel and sensitive sandwich-type electrochemical aptasensor has been developed for thrombin detection based on platinum nanoparticles (Pt NPs) decorated carbon nanocages (CNCs) as signal tags. The morphological and compositional of the Pt NPs/CNCs were examined using transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The results showed that the Pt NPs with about 3-5nm in diameter were well dispersed on the surface of CNCs. The thiolated aptamer was firstly immobilized on the gold electrode to capture the thrombin molecules, and then aptamer functionalized Pt NPs/CNCs nanocomposites were used to fabricate a sandwich sensing platform. Then, the high-content Pt NPs on carbon nanocages acting as hydrogen peroxide-mimicking enzyme catalyzed the reduction of H2O2, resulting in significant electrochemical signal amplification. Differential pulse voltammetry is employed to detect thrombin with different concentrations. Under optimized conditions, the approach provided a good linear response range from 0.05 pM to 20nM with a low detection limit of 10fM. This Pt NPs/CNCs-based aptasensor shows good precision, acceptable stability and reproducibility, which provided a promising strategy for electrochemical aptamer-based detection of other biomolecules.

On the convergence of nanotechnology and Big Data analysis for computer-aided diagnosis

An overview is provided of the challenges involved in building computer-aided diagnosis systems capable of precise medical diagnostics based on integration and interpretation of data from different sources and formats. The availability of massive amounts of data and computational methods associated with the Big Data paradigm has brought hope that such systems may soon be available in routine clinical practices, which is not the case today. We focus on visual and machine learning analysis of medical data acquired with varied nanotech-based techniques and on methods for Big Data infrastructure. Because diagnosis is essentially a classification task, we address the machine learning techniques with supervised and unsupervised classification, making a critical assessment of the progress already made in the medical field and the prospects for the near future. We also advocate that successful computer-aided diagnosis requires a merge of methods and concepts from nanotechnology and Big Data analysis.

A Novel Photoelectrochemical Biosensor for Tyrosinase and Thrombin Detection

A novel photoelectrochemical biosensor for step-by-step assay of tyrosinase and thrombin was fabricated based on the specific interactions between the designed peptide and the target enzymes. A peptide chain with a special sequence which contains a positively charged lysine-labeled terminal, tyrosine at the other end and a cleavage site recognized by thrombin between them was designed. The designed peptide can be fixed on surface of the CdTe quantum dots (QDs)-modified indium-tin oxide (ITO) electrode through electrostatic attraction to construct the photoelectrochemical biosensor. The tyrosinase target can catalyze the oxidization of tyrosine by oxygen into ortho-benzoquinone residues, which results in a decrease in the sensor photocurrent. Subsequently, the cleavage site could be recognized and cut off by another thrombin target, restoring the sensor photocurrent. The decrease or increase of photocurrent in the sensor enables us to assay tyrosinase and thrombin. Thus, the detection of tyrosinase and thrombin can be achieved in the linear range from 2.6 to 32 μg/mL and from 4.5 to 100 μg/mL with detection limits of 1.5 μg/mL and 1.9 μg/mL, respectively. Most importantly, this strategy shall allow us to detect different classes of enzymes simultaneously by designing various enzyme-specific peptide substrates.

Ultrasensitive Electrochemical Biosensor for HIV Gene Detection Based on Graphene Stabilized Gold Nanoclusters with Exonuclease Amplification

Because human immunodeficiency virus (HIV) has been one of the most terrible viruses in recent decades, early diagnosis of the HIV gene is of great importance for all scientists around the world. In our work, we developed a novel electrochemical biosensor based on one-step ultrasonic synthesized graphene stabilized gold nanocluster (GR/AuNC) modified glassy carbon electrode (GCE) with an exonuclease III (Exo III)-assisted target recycling amplification strategy for the detection of HIV DNA. It is the first time that GR/AuNCs have been used as biosensor platform and aptamer with cytosine-rich base set as capture probe to construct the biosensor. With the combination of cytosine-rich capture probe, good conductivity and high surfaces of GR/AuNCs, and Exo III-assisted target recycling amplification, we realized high sensitivity and good selectivity detection of target HIV DNA with a detection limit of 30 aM (S/N = 3). Furthermore, the proposed biosensor has a promising potential application for target detection in human serum analysis.

Plasmon coupling-enhanced two-photon photoluminescence of Au@Ag core-shell nanoparticles and applications in the nuclease assay

Au and Ag nanoparticles (NPs) have been known to display significantly enhanced two-photon photoluminescence (2PPL) upon the formation of nanoparticle aggregates. The enhancement effect of the core-shell nanoparticles has not been explored so far. Here we have prepared Au@Ag bimetallic core-shell nanoparticles with different thicknesses (1.1, 2.1, 3.5, 4.5, and 5.5 nm) of silver coating on 19 nm Au NPs to investigate the composition effects on plasmon coupling-enhanced 2PPL. A maximum 2PPL enhancement factor (IcoupledNPs/IisolatedNPs) of up to 840-fold was obtained for Au@Ag NPs with ∼3.5 nm Ag nanoshells. These Au@Ag NPs were subsequently utilized in two-photon detection of S1 nuclease as a photoluminescence turn on probe. This method displayed high sensitivity with the limit of detection of 1.4 × 10(-6) U μL(-1) and an excellent selectivity.

Dual aptamer-immobilized surfaces for improved affinity through multiple target binding in potentiometric thrombin biosensing

We developed a label-free and reagent-less potentiometric biosensor with improved affinity for thrombin. Two different oligomeric DNA aptamers that can recognize different epitopes in thrombin were introduced in parallel or serial manners on the sensing surface to capture the target via multiple contacts as found in many biological systems. The spacer and linker in the aptamer probes were optimized for exerting the best performance in molecular recognition. To gain the specificity of the sensor to the target, an antifouling molecule, sulfobeaine-3-undecanethiol (SB), was introduced on the sensor to form a self-assembled monolayer (SAM). Surface characterization revealed that the aptamer probe density was comparable to the distance of the two epitopes in thrombin, while the backfilling SB SAM was tightly aligned on the surface to resist nonspecific adsorption. The apparent binding parameters were obtained by thrombin sensing in potentiometry using the 1:1 Langmuir adsorption model, showing the improved dissociation constants (Kd) with the limit of detection of 5.5 nM on the dual aptamer-immobilized surfaces compared with single aptamer-immobilized ones. A fine control of spacer and linker length in the aptamer ligand was essential to realize the multivalent binding of thrombin on the sensor surface. The findings reported herein are effective for improving the sensitivity of potentiometric biosensor in an affordable way towards detection of tiny amount of biomolecules.

An aptamer-based single particle method for sensitive detection of thrombin using fluorescent quantum dots as labeling probes

In this study, an aptamer-based single particle method was developed for the thrombin detection in human serum samples using fluorescence correlation spectroscopy (FCS). In this method, quantum dots (QDs) were used as the fluorescent probes and thrombin-binding aptamer (TBA) was used as molecular recognition unit. When two QDs probes labeled with TBA (QD-TBA1 and QD-TBA2) are mixed in a sample containing thrombin targets, the binding of targets will cause QDs to form dimers (or oligomers) with bigger sizes, which leads to the nearly double increase in the characteristic diffusion time of QDs in the detection volume of FCS. FCS method can detect the change in the characteristic diffusion time of QDs. Firstly, the diffusion and blinking behaviors of QD-TBA probes in the presence of thrombin were investigated by FCS and total internal reflection fluorescence microscopy (TIRFM) imaging system, and the experimental results documented that QD-TBAs were bound together with "one-by-one" structure when thrombin were added into the solution. And then, the assay conditions were optimized in order to improve the sensitivity and specificity of this method. Under the optimized conditions, the linear range of the method is from 5.0 nM to 500 nM of thrombin, and the limit of detection is about 2.6 nM. Finally, this method was applied to homogeneous determination of thrombin in human serum samples.

Nanomaterials for diagnosis: challenges and applications in smart devices based on molecular recognition

Clinical diagnosis has always been dependent on the efficient immobilization of biomolecules in solid matrices with preserved activity, but significant developments have taken place in recent years with the increasing control of molecular architecture in organized films. Of particular importance is the synergy achieved with distinct materials such as nanoparticles, antibodies, enzymes, and other nanostructures, forming structures organized on the nanoscale. In this review, emphasis will be placed on nanomaterials for biosensing based on molecular recognition, where the recognition element may be an enzyme, DNA, RNA, catalytic antibody, aptamer, and labeled biomolecule. All of these elements may be assembled in nanostructured films, whose layer-by-layer nature is essential for combining different properties in the same device. Sensing can be done with a number of optical, electrical, and electrochemical methods, which may also rely on nanostructures for enhanced performance, as is the case of reporting nanoparticles in bioelectronics devices. The successful design of such devices requires investigation of interface properties of functionalized surfaces, for which a variety of experimental and theoretical methods have been used. Because diagnosis involves the acquisition of large amounts of data, statistical and computational methods are now in widespread use, and one may envisage an integrated expert system where information from different sources may be mined to generate the diagnostics.

Monitoring thrombin generation and screening anticoagulants through pulse laser-induced fragmentation of biofunctional nanogold on cellulose membranes

Thrombin generation (TG) has an important part in the blood coagulation system, and monitoring TG is useful for diagnosing various health issues related to hypo-coagulability and hyper-coagulability. In this study, we constructed probes by using mixed cellulose ester membranes (MCEMs) modified with gold nanoparticles (Au NPs) for monitoring thrombin activity using laser desorption/ionization mass spectrometry (LDI-MS). The LDI process produced Au cationic clusters ([Au(n)](+); n = 1-3) that we detected through MS. When thrombin reacted with fibrinogen on the Au NPs-MCEMs, insoluble fibrin was formed, hindering the formation of Au cationic clusters and, thereby, decreasing the intensity of their signals in the mass spectrum. Accordingly, we incorporated fibrinogen onto the Au NPs-MCEMs to form Fib-Au NPs-MCEM probes to monitor TG with good selectivity (>1000-fold toward thrombin with respect to other proteins or enzymes) and sensitivity (limit of detection for thrombin of ca. 2.5 pM in human plasma samples). Our probe exhibited remarkable performance in monitoring the inhibition of thrombin activity by direct thrombin inhibitors. Analyses of real samples using our new membrane-based probe suggested that it will be highly useful in practical applications for the effective management of hemostatic complications.

Tuning two-photon photoluminescence of gold nanoparticle aggregates with DNA and its application as turn-on photoluminescence probe for DNA sequence detection

Plasmon coupling between noble metal nanoparticles has been known to dramatically enhance linear and nonlinear optical properties of nearby chromophores and metal nanoparticles themselves. The interparticle distance is expected to have significant influence on the coupling strength. Here we have prepared DNA tuned Au nanoparticle assemblies with well controlled separation distances from 2.0 to 12.2 nm to investigate plasmon coupling strength and particle size effects on two-photon photoluminescence (TPPL) enhancement. TPPL intensities of these DNA coupled nanoassemblies were found to increase rapidly as the separation distance decreases. The largest TPPL enhancement factors of 115 and 265 were achieved at the shortest available separation distance of 2.0 nm for 21 and 41 nm Au NPs-dsDNA assemblies, respectively. We have further utilized DNA induced coupling of Au NPs and TPPL enhancement to develop a two-photon sensing scheme for detection of DNA sequences. This TPPL based method displayed high sensitivity with a limit of detection of 2.9 pM and excellent selectivity against ssDNA with mismatched bases. A single mismatch can be easily differentiated at room temperature. Taking the unique advantages of two-photon excitation, this method could be potentially further extended to DNA detection inside cells or even in vivo. These findings can provide important insight for fundamental understanding of plasmon-coupling enhanced TPPL and development of various two-photon excitation based applications.