Synthesis of porous hierarchical MgO and its superb adsorption properties

Anchoring Pt Single-Atom Sites on Vacancies of MgO(Al) Nanosheets as Bifunctional Catalysts to Accelerate Hydrogenation-Cyclization Cascade Reactions

The direct hydrogenation of 2-nitroacylbenzene to 2,1-benzisoxazole presents a significant challenge in the pharmaceutical and fine chemicals industries. In this study, a defect engineering strategy is employed to create bifunctional single-atom catalysts (SACs) by anchoring Pt single atoms onto metal vacancies within MgO(Al) nanosheets. The resultant Pt1/MgO(Al) SAC displays an exceptional catalytic activity and selectivity in the hydrogenation-cyclization of 2-nitroacylbenzene, achieving a 97.5 % yield at complete conversion and a record-breaking turnover frequency of 458.8 h-1 under the mild conditions. The synergistic catalysis between the fully exposed single-atom Pt sites within a unique Pt-O-Mg/Al moiety and the abundant basic sites of the MgO(Al) support is responsible for this outstanding catalytic performance. The current work, therefore, paves the way for developing bifunctional or multifunctional SACs that can enhance efficient organocatalytic conversions.

Efficient fluoride removal using nano MgO: mechanisms and performance evaluation

In this study, highly efficient fluoride removal of nano MgO was successfully synthesized using a simple hydrothermal precipitation method. Hexadecyl trimethyl ammonium bromide (CTMAB) was utilized as a surfactant. Its long-chain structure tightly wrapped around the precursor crystal of basic magnesium chloride, inhibiting the growth of precursor crystals, reducing their size, and improving crystal dispersion. This process enhanced the adsorption capacity of nano MgO for fluoride. The adsorption performance of nano MgO on fluoride was investigated. The results indicate that pseudo-second-order kinetics and the Langmuir isotherm model can describe the adsorption behavior for fluoride, with a maximum adsorption capacity of 122.47 mg/g. Methods such as XRD, SEM, XPS, and FTIR were employed to study the adsorption mechanisms of the adsorbent. Additionally, factors potentially affecting adsorption performance in practical applications, such as pH and competing ions, were examined. This study enhances our profound understanding of the defluorination effectiveness and mechanisms of nano MgO.

Ultrahigh-Porosity MgO Microparticles for Heat-Energy Storage

Continuous industrial development has increased the demand of energy. Inevitably, the development of energy sources is steadily progressing using various methods. Rather than establishing a new energy source, a system for storing waste heat generated by industry has now been accepted as a useful strategy. Among such systems, the hydration and dehydration reactions of MgO/Mg(OH)2  are eco-friendly, have relatively low toxicity and risk, and have a large reserves. Therefore, it is a promising candidate for a heat-storage system. In this study, ultrahigh-porosity particles are used to maximize the heat-storage efficiency of pure MgO. Due to its large surface area, the heat storage rate is 90.3% of the theoretical value and the reaction rate is very high. In addition, as structural collapse, likely to be caused by volume changes between reactions, is blocked as the porous region is filled and emptied, the cycle stability is secured. Ultrahigh-porosity MgO microparticles can be used to build eco-friendly heat-storage systems.

Rapid and enhanced adsorptive mitigation of groundwater fluoride by Mg(OH)2 nanoflakes

Fluoride is one of the most abundant anions in groundwater, posing a significant threat to the safe drinking water supply worldwide. Fluoride contamination in drinking water at levels greater than 1.5 mg L^-1 causes a variety of serious health problems. To address this problem, the current study deals with the synthesis of Mg(OH)₂ nanoflakes by a facile and simple hydrothermal method in the absence of any added template. The sizes of these nanoflakes are in the range of 90 to 200 nm. These nanoflakes are pure and crystalline, possessing hexagonal phase structures. The surface areas of Mg(OH)₂ nanoflakes are varying from 75.8 to 108.1 m² g^-1. These Mg(OH)₂ nanoflakes exhibit excellent adsorption performance for fluoride over a pH range of 2.0 to 9.0 with a maximum Langmuir adsorption capacity of 3129 mg g^-1 at pH 7.0 at 313 K which is the highest for such kind of adsorbent reported so far. The adsorption process is spontaneous and endothermic which primarily follows pseudo-second-order kinetics. The adsorbent is effective in the presence of co-existing anions and is reusable up to the fifth cycle with a minimal loss of adsorption performance. The nanoflakes can effectively remove highly concentrated groundwater fluoride to a permissible limit within a short time which increases the versatility of using these nanoflakes for practical applications.

Congo Red Dye Adsorption using Magnesium Hydroxide from Seawater Bittern

The study of Mg(OH)2 from seawater bittern as an adsorbent for Congo red (CR) from an aqueous solution has been performed. This study aimed to determine the effect of pH, contact time, and initial CR concentration on CR adsorption by Mg(OH)2. The adsorption kinetics and isotherms of CR on Mg(OH)2 in an aqueous solution were also studied. The optimum adsorption was obtained at pH 8 within 90 minutes of contact time with an adsorption capacity of 46.3 mg/g for an initial CR concentration of 29 mg/L. The adsorption process followed the Freundlich isotherm model with an n value of 2.579 and the pseudo-second-order kinetic model with a k2 value of 0.0021 g mg−1min−1.

Recovering metal ions from oxalic acid leaching palygorskite-rich clay wastewater to fabricate layered mixed metal oxide/carbon composites for high-efficient removing Congo red

This study developed a sustainable way to transform metallic residues in wastewater and spent adsorbents that adsorbed organic pollutants into novel high-efficiency adsorbents to treat water pollution again. The metal ions recovered from oxalic acid leaching palygorskite-rich clay wastewater was used to construct the hydrotalcite-like composites, after adsorbing organic pollutants, which was calcined and carbonized to convert into the mixed metal oxide/carbon composites (MMO/Cs). The fabricated MMO/Cs showed outstanding adsorption performance for the anionic azo dye Congo Red (CR). Especially, the MMO/C2 with the M²⁺/M³⁺ molar ratio of 2, which adjusted by supplementing Mg²⁺, had ultra-high adsorption capacity and ultra-clean removal efficiency for CR. The adsorption capacity was as high as 3303 mg/g, and only 0.5 g/L MMO/C2 dosing treatment for 6 h could completely decolor and remove the 2000 mg/L CR aqueous solution. Moreover, MMO/Cs exhibited the ability to simultaneous remove CR and Methylene blue (MB) mixed dye contaminants, and demonstrated the excellent recyclability. This work provides a promising method for the high-value conversion of waste resources and the synthesis of high-efficiency adsorbents.

Molecular Assemblies Offering Hydrogen-Bonding Cavities: Influence of Macrocyclic Cavity and Hydrogen Bonding on Dye Adsorption

This work presents a set of Hg macrocycles of amide-phosphine-based ligands offering H-bonding cavities of different dimensions. Such macrocycles are shown to selectively adsorb anionic dyes followed by neutral dyes as well as Prontosil, a biologically relevant antibiotic, within their cavities with the aid of H-bonding-assisted encapsulation. Kinetic experiments supported by spectroscopic and docking studies illustrate the importance of the cavity structure as well as H-bonds for the selective adsorption of dyes.

Synthesis of Mg-Al Hydrotalcite Clay with High Adsorption Capacity

A novel Mg-Al metal oxide has been successfully synthesized by the calcination of hierarchical porous Mg-Al hydrotalcite clay obtained by using filter paper as a template under hydrothermal conditions. Various characterizations of the obtained nanoscale oxide particles verified the uniform dispersion of Mg-Al metal oxides on the filter paper fiber, which had a size of 2–20 nm and a highest specific surface area (SSA) of 178.84 m²/g. Structural characterization revealed that the as-prepared Mg-Al metal oxides preserved the tubular morphology of the filter paper fibers. Further experiments showed that the as-synthesized Mg-Al metal oxides, present at concentrations of 0.3 g/L, could efficiently remove sulfonated lignite from oilfield wastewater (initial concentration of 200 mg/L) in a neutral environment (pH = 7) at a temperature of 298 K. An investigation of the reaction kinetics found that the adsorption process of sulfonated lignite (SL) on biomorphic Mg-Al metal oxides fits a Langmuir adsorption model and pseudo-second-order rate equation. Thermodynamic calculations propose that the adsorption of sulfonated lignite was spontaneous, endothermic, and a thermodynamically feasible process.

Exfoliation of 2D materials by saponin in water: Aerogel adsorption / photodegradation organic dye

The biggest challenge for the paint industry is to clean the contaminated waste dye solution before it released into the water or to reuse it to create new paint and to protect the water from environmental pollution. Here in this work, exfoliating layered transition metal dichalcogenide materials prepare to the exfoliated 2D materials thin sheets in water with the assistance of natural saponin. Then, the three-dimensional (3D) MoS₂-aerogel composite was synthesized by using greenway exfoliated two-dimensional (2D) MoS₂ thin sheets to form MoS₂-aerogel composite. The prepared 3D MoS₂-aerogel composite demonstrates excellent 94% methylene blue (MB) dye adsorption ability over 5 min. Moreover, the adsorbed MB of the MoS₂-aerogel shows ∼80% dye degradation activity in the presence of visible light. Therefore, these synthesized 3D MoS₂-aerogel composite could be an excellent candidate for photocatalytic applications in the future.

Mesoporous Magnesium Oxide Adsorbent Prepared via Lime (Citrus aurantifolia) Peel Bio-templating for CO2 Capture

The utilization of the lime (Citrus aurantifolia) peel as a template can improve the adsorbent’s structural properties, which consequently affect its CO2 uptake capacity. Herein, a mesoporous magnesium oxide (MgO-lime (Citrus aurantifolia) peel template (LPT)) adsorbent was synthesized using an LPT. MgO-LPT demonstrated improved structural properties and excellent CO2 uptake capacity. Moreover, another MgO adsorbent was prepared via thermal decomposition (MgO-TD) for comparison. The prepared adsorbents were characterized by N2 physisorption, Fourier transform infrared spectroscopy and thermogravimetric analysis. The CO2 uptake of these adsorbents was under 100% CO2 gas and ambient temperature and pressure conditions. MgO-LPT exhibited a higher Brunauer–Emmett–Teller surface area, Barrett–Joyner–Halenda pore volume, and pore diameter of 23 m2.g−1, 0.142 cm3.g−1, and 24.6 nm, respectively, than those of MgO-TD, which indicated the mesoporous structure of MgO-LPT. The CO2 uptake capacity of MgO-LPT is 3.79 mmol CO2.g−1, which is 15 times that of MgO-TD. This study shows that the application of lime peel as a template for the synthesis of MgO adsorbents is a promising approach to achieve MgO adsorbents with enhanced surface area and thus increased CO2 capture performance. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

A rational design of layered metal-organic framework towards high-performance adsorption of hazardous organic dye

Water pollution originating from organic dyes is endangering the survival and development of society; however, adsorbents with high capacity (>5000 mg g^-1) for the fast removal (≤30 min) of Congo Red (CR) in aqueous solution have been not reported to date. In the present work, an acid-base stably layered MOF, [Cd(H₂L)(BS)₂]_n·2nH₂O (L-MOF-1, H₂L = N1,N2-bis(pyridin-3-ylmethyl)ethane-1,2-diamine, BS = benzenesulfonate), was hydrothermally prepared. L-MOF-1 exhibited high-performance adsorption of CR in aqueous solution at room temperature. The experimental adsorption capacity of the L-MOF-1 adsorbent towards CR reached up to about 12 000 mg g^-1 in 20 min in the pH range of 2.2-4.7, which is the best adsorbent with the highest capacity and fastest adsorption of CR to date. The spontaneous adsorption process can be described by the pseudo-second-order kinetic and Langmuir isotherm models. Meanwhile, the L-MOF-1 absorbent possessed a highly positive zeta potential in acid condition (even at pH = 2.2, zeta potential = 36.2 mV). Its good adsorption performance mainly originates from its strong electrostatic attraction with CR in acidic condition, together with diverse hydrogen bonds and ππ stacking interactions. Furthermore, the L-MOF-1 absorbent exhibited good selectivity and could be reused five times through simply washing, where its adsorption efficiency was hardly affected. Therefore, L-MOF-1 is a potential absorbent for effectively removing CR from dye wastewater.

Efficient adsorption removal of anionic dyes by an imidazolium-based mesoporous poly(ionic liquid) including the continuous column adsorption-desorption process

The mesoporous poly(N,N'-methylene-bis(1-(3-vinylimidazolium)) chloride), labeled as PDVIm-Cl, with double anions (Cl^-) and low monomer molecular weight was synthesized and applied in the adsorption of anionic dyes (acid orange 7 (AO7), sunset yellow (SY), reactive blue 19 (RB19), congo red (CR)). Due to the mesoporous structure, abundant Cl^- and positively charged imidazole rings, the poly(ionic liquid) (PIL) exhibited superior adsorption ability towards anionic dyes. What is more, the RB19 adsorption by PDVIm-Cl could achieve the highest capacity (2605 ± 254 mg g^-1) which was nearly twice higher than the maximum adsorption capacity of the previously reported materials. All the adsorption kinetic data and isotherms fitted well with the pseudo second-order model and Langmuir-Freundlich model. To better explore the practical potential of the PIL for dye adsorption, the adsorption under different pH values and column adsorption performances were also evaluated. Results showed that PDVIm-Cl exhibited high removal efficiencies for anionic dyes over a wide pH range (2-10). Also, the great reusability could be well demonstrated by the achievable continuous column adsorption-desorption process. It is worth mentioning that the regeneration could be realized with very little desorbent which was far less than the adsorption volume flowing through the column and the desorption efficiency was well maintained after three consecutive cycles. At last, the adsorption mechanism was explored by experiments combined with quantum chemical calculations and showed anionic dyes adsorption by PDVIm-Cl was a joint process dominated by the ion exchange, electrostatic interaction, hydrogen bond and π-π stacking.

Nitrogen-rich covalent triazine frameworks for high-efficient removal of anion dyes and the synergistic adsorption of cationic dyes

Efficient adsorption of organic dyes from effluent has great importance for ecological and environmental protection. Herein, covalent triazine frameworks (CTFs) were constructed via the polycondensation of melamine and cyanuric chloride directly. Due to the numerous basic nitrogen atoms as high as 58.98 wt%, high BET surface area (670.2 m g^-1), and hierarchical pore structure, CTFs demonstrated selective adsorption of anionic dyes in high capacity (e.g., a maximum adsorption capacity of 1581 mg g^-1 for Congo red at 30 °C). The mechanism of the outstanding adsorption performance was carefully verified and ascribed to the electrostatic attraction and hydrogen bonding between CTFs and anionic dyes. The amine groups linking two adjacent triazine rings have primary responsibility for the superior performance. Unexpectedly, CTFs expressed a tuning synergetic effect for removing cationic dyes in aqueous solution coexisting with anionic dyes, exhibiting a great superiority in the specific and comprehensive treatment of organic dyes contaminated water. Furthermore, CTFs were stable and had long-periodic availability for more than 6 times, ensuring the adsorption rate higher than 90%. For better operation, hybrid monolithic aerogels were constructed by incorporating CTFs into polyvinylidene fluoride then casting in melamine resin foams. The obtained aerogels expressed high-efficient removal of anionic dyes coupled with convenient operation. This well-established metal-free porous material is a promising adsorbent candidate for anionic dyes selectively and even synergetic adsorption of cationic dyes in water remediation.

Facile preparation of robust dual MgO-loaded carbon foam as an efficient adsorbent for malachite green removal

This study developed a facile approach for the fabrication of dual MgO-loaded carbon foam (DMCF) via carbonization of a cured MgO/cyanate ester resin mixture, which underwent self-foaming of the resin followed by the carbothermal reduction of MgO. The features of the prepared DMCF prepared were characterized by FESEM, TEM, XRD, FTIR, XPS and so on, and the effects of adsorption conditions, adsorption isotherms, kinetics, and thermodynamics on malachite green (MG) removal using the DMCF as adsorbents were investigated through batch adsorption experiments. Results demonstrate that the DMCF possesses a unique dual loading of MgO particles which are not only loaded onto its foam walls but also filled within the walls with a graphene-wrapped core-shell structure. The experimental maximum adsorption capacity of MG reaches up to 1874.18 mg/g with a partition coefficient of 10.87 mg/g/μM. The adsorption process can be better described with Langmuir, pseudo-second-order, and intraparticle diffusion models. Moreover, the DMCF exhibits a removal percentage of 84.85% after five reuses, indicating that it is an efficient and promising adsorbent for MG adsorption.

Synthesis and characterization of magnesium oxide nanoparticle-containing biochar composites for efficient phosphorus removal from aqueous solution

The effective removal and recovery of phosphorus from aquatic environments are highly important for successful eutrophication control and phosphorus recycling. Herein, we prepared biochar containing MgO nanoparticles (MgO-biochar) by fast pyrolysis of MgCl₂-impregnated corn stalks, probed its phosphate adsorption performance. Through the fast pyrolysis, the MgCl₂ promoted the formation of micropores and mesoporous, and decomposed into MgO nanoparticles with the size smaller than 100 nm. The adsorption experiments showed that the adsorption property increased with the increase of Mg content, and had a strong correlation with the external surface area. And the phosphate adsorption was well described by the Langmuir-Freundlich model (maximum adsorption capacity was determined as 60.95 mg P/g). Kinetic analysis and characterization analysis of MgO-biochar for different adsorption time indicated that phosphate adsorption onto MgO-biochar was mainly controlled by rapid binding to the external surface (about 75% of the equilibrium adsorption amount), and the uptake rate was limited by the slow diffusion of phosphate into the biochar interior (about 25% of the equilibrium adsorption amount). The results suggested that the synthesized MgO-biochar with enough MgO active site dispersed on a higher external surface can be used as a potential adsorbent for phosphate removal and recovery from aqueous solution.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

Functional MgO-Lignin Hybrids and Their Application as Fillers for Polypropylene Composites

Inorganic-organic hybrids are a group of materials that have recently become the subject of intense scientific research. They exhibit some of the specific properties of both highly durable inorganic materials (e.g., titanium dioxide, zinc) and organic products with divergent physicochemical traits (e.g., lignin, chitin). This combination results in improved physicochemical, thermal or mechanical properties. Hybrids with defined characteristics can be used as fillers for polymer composites. In this study, three types of filler with different MgO/lignin ratio were used as fillers for polypropylene (PP). The effectiveness of MgO-lignin binding was confirmed using Fourier transform infrared spectroscopy. The fillers were also tested in terms of thermal stability, dispersive-morphological properties as well as porous structure. Polymer composites containing 3 wt.% of each filler were subjected to wide angle X-ray diffraction tests, differential scanning calorimetry and microscopic studies to define their structure, morphology and thermal properties. Additionally, tensile tests of the composites were performed. It was established that the composition of the filler has a significant influence on the crystallization of polypropylene-either spherulites or transcrystalline layers were formed. The value of Young's modulus and tensile strength remained unaffected by filler type. However, composites with hybrid fillers exhibited lower elongation at break than unfilled polypropylene.

Construction of a hierarchical-structured MgO-carbon nanocomposite from a metal–organic complex for efficient CO2 capture and organic pollutant removal

A hierarchical-structured porous MgO/C nanocomposite derived from a metal–organic complex performs as a remarkable adsorbent for CO₂ adsorption and organic pollutant removal.

Hectogram-scale green synthesis of hierarchical 4A zeolite@CuOx(OH)(2−2x) (0 ≤ x < 1) nanosheet assemblies core–shell nanoarchitectures with Superb Congo red adsorption performance

Delicate design of hierarchical nanoarchitectures has become a highly effective strategy to develop novel adsorbents with improved adsorption capacity. Herein, hectogram-scale green fabrication of hierarchical 4A zeolite@CuO_x(OH)_(2−2x) (0 ≤ x < 1) nanosheet assemblies core–shell nanoarchitectures (4A-Cu-T, T was the calcination temperature) with terrific Congo red (CR) dye adsorption performance was achieved through a simple, template-free and surfactant-free hydrothermal approach. A series of characterization techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction and photoelectron spectroscopy demonstrated that all resultant adsorbents featured a core–shell structure with 4A zeolite as core ingredients and CuO_x(OH)_(2−2x) (0 ≤ x < 1) nanosheet assemblies as shell components. The adsorption experimental results pointed out that 4A-Cu-300 with a maximum adsorption capacity of 512.987 mg g⁻¹ showed the best adsorption performance amongst all as-prepared adsorbents, and the adsorption capacity of shell component-CuO_xCu(OH)_(2−2x) (0 ≤ x < 1) nanosheet assemblies was calculated up to 3685.500 mg g⁻¹. The shell thickness and phase ratio of CuO and Cu(OH)₂ in CuO_x(OH)_(2−2x) (0 ≤ x < 1) nanosheet assemblies played key roles in improving the adsorption capacity. The successive tests suggested that the “carbon deposition” resulted in the decreased adsorption capacity of first-regenerated adsorbents, but little variance in adsorption performance among regenerated samples demonstrated the good stability of such adsorbents. This work unlocks a method for the rational design of high-performance adsorbents via delicate decoration of poor-performance materials with nanosheet assemblies, which will endow the non-active materials with enhanced adsorption properties.

The growth of CuO_xCu(OH)_(2−2x) (0 ≤ x < 1) nanosheet assemblies on the surface of 4A zeolite transforms poor-performance 4A zeolite adsorbents into high-performance 4A-Cu-300 adsorbents for Congo red study.

Self-templated microwave-assisted hydrothermal synthesis of two-dimensional holey hydroxyapatite nanosheets for efficient heavy metal removal

Heavy metals have caused serious environmental problems and threat to human health. Ultrathin and holey two-dimensional (2D) nanosheets have recently drawn significant attention as superb adsorbent material to remove heavy metal ions due to their unique physicochemical properties. Herein, we report a self-template-directed ultrafast reaction route to synthesis porous hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂) nanosheets via a microwave-assisted hydrothermal method using poly(allylamine hydrochloride) as an additive. The resulting hydroxyapatite nanosheets showed a high specific surface area (92.9 m² g^-1) and excellent adsorption performance for various heavy metal ions including Pb(II), Cu(II), and Cd(II), with maximum adsorption capacities of 210.5, 31.6, and 24.9 mg g^-1, respectively. The adsorption kinetics fitted well with the pseudo-second-order equation and the equilibrium data showed a high correlation coefficient with the Langmuir model. Based on the experimental results and analysis, we can conclude that the sorption of heavy metal ions with the hydroxyapatite nanosheets mainly attributes to surface complexation and cation exchange. The present synthetic strategy allows the fast and massive production of porous hydroxyapatite ultrathin nanosheets and may also potentially be applicable to the fabrication of other metal phosphates with assembled or hierarchical porous structures towards various applications such as water purification.

One-step preparation of polyimide-inlaid amine-rich porous organic block copolymer for efficient removal of chlorophenols from aqueous solution

A novel polyimide-inlaid amine-rich porous organic block copolymer (PI-b-ARPOP) was prepared via one-step polymerization by using different molar ratios of melamine (MA)/terephthalaldehyde (TA)/pyromellitic dianhydride (PMDA), at molar ratios of 4/3/1, 4/2/2 and 4/1/3. The copolymer contained both aminal groups belonging to ARPOP and imide groups belonging to PI, and the bonding styles of the monomers and growth orientations of the polymeric chains were diversiform, forming an excellent porous structure. Notably, MA/TA/PMDA (4/2/2) had a surface area and pore volume of 487.27 m²/g and 1.169 cm³/g, respectively. The adsorption performance of the materials towards 2,4-dichlorophenol (2,4-DCP) in ultra-pure water was systematically studied. The pH value of 7 was optimal in aqueous solution. Na⁺ and Cl^- ions did not negatively affect the adsorption process, while humic acid (HA) slightly decreased the capacity. The equilibrium time was 40 sec, and the maximum adsorption capacity reached 282.49 mg/g at 298 K. The removal process was endothermic and spontaneous, and the copolymer could maintain its porous structure and consistent performance after regeneration by treatment with alkali. Moreover, to further assess the practical applicability of the material, the adsorption performance towards 2,4-DCP in river water was also investigated. This paper demonstrated that the PI-b-ARPOP can be an efficient and practical adsorbent to remove chlorophenols from aqueous solution.

Preparation of magnetic polyimide@ Mg-Fe layered double hydroxides core-shell composite for effective removal of various organic contaminants from aqueous solution

In this work, a novel core-shell structured magnetic polyimide@layered double oxides (LDO) composites coating a porous polyimide (PI)-coated Fe3O4 magnetic core and layered double hydroxide (LDH) has been successfully synthesized by solve-thermal synthesis and co-precipitation process. The magnetic PI@LDO composites were characterized by scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction (XRD), thermogravimetry analysis (TGA) and magnetic properties analysis. The composite materials displayed core-shell structure with flower-like morphology. The magnetic PI@LDO composites were applied to remove tetracycline (TC), 2,4-dichlorophenol (2,4-DCP) and glyphosate (GP) from aqueous solution. The action pH value was ranged from 5 to 9 for TC and GP and 3 to 7 for 2,4-DCP, respectively. Cl- showed a weak competitive adsorption effect to TC, 2, 4-DCP and GP. In addition, the presence of humic acid (HA) could slightly reduce the adsorption capacity of magnetic PI@LDO composites. The adsorption process could be well described by pseudo-second-order model for TC and GP, while pseudo-first-order model for 2,4-DCP. The experimental data of TC and 2,4-DCP could be fitted better with Freundlich model, while that of GP were fitted better with Langmuir model. The adsorptions of TC, 2,4-DCP and GP were both spontaneous and endothermic. The adsorption capacity decreased slightly after adsorption-desorption cycles repeated five times. This study demonstrated that magnetic PI@LDO exhibited great potential to be a mild and cost-effective adsorbent for the removal of various organic contaminants from wastewater.