Water-soluble Pd nanoparticles synthesized from ω-carboxyl-S-alkanethiosulfate ligand precursors as unimolecular micelle catalysts

Water-Soluble Pd Nanoparticles for the Anti-Markovnikov Oxidation of Allyl Benzene in Water

The catalytic activity and selectivity of two different water-soluble palladium nanoparticles capped with 5-(trimethylammonio)pentanethiolate and 6-(carboxylate)hexanethiolate ligands are investigated using the catalytic reaction of allyl benzene. The results show that the regioselective transformation of allyl benzene to 3-phenylpropanal occurs at room temperature and under atmospheric pressure in neat water via a Tsuji-Wacker type oxidation. Conventionally, the Tsuji-Wacker oxidation promotes the Markovnikov oxidation of terminal alkenes to their respective ketones in the presence of dioxygen. Water-soluble Pd nanoparticles, however, catalyze the anti-Markovnikov oxidation of allyl benzene to 3-phenylpropanal in up to 83% yields. Catalytic results of other aromatic alkenes suggest that the presence of benzylic hydrogen is a key to the formation of a p-allyl Pd intermediate and the anti-Markovnikov addition of H₂O. The subsequent b-H elimination and tautomerization contribute to the formation of aldehyde products. Water-soluble Pd nanoparticles are characterized using nuclear magnetic resonance (NMR), UV-vis spectroscopy, thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). Catalysis results are examined using ¹H NMR and/or GC-MS analyses of isolated reaction mixtures.

Bioinspired Pd-Cu Alloy Nanoparticles as Accept Agent for Dye Degradation Performances

Dye degradation is a key reaction in organic decomposition production through electron donor transferring. Palladium (Pd) is the best-known element for synthesis Pd-based catalyst, the surface status determines the scope of relative applications. Here we first prepare Pd-Cu alloy nanoparticles (NPs) by co-reduction of Cu(acac)₂ (acac = acetylacetonate) and Pd(C₅HF₆O₂)₂ in the presence of sodium borohydride (NaBH₄) and glutathione (GSH). The obtained Pd-Cu is about ~10 nm with super-hydrophilicity in aqueous mediums. The structural analysis clearly demonstrated the uniform distribution of Pd and Cu element. The colloidal solution keeps stability even during 30 days. Bimetallic Pd-Cu NPs shows biocompatibility in form of cell lines (IMEF, HACAT, and 239 T) exposed to colloidal solution (50 µg mL^-1) for 2 days. It shows the catalytic multi-performance for dye degradation such as methyl orange (MO), rhodamine B (RhB), and methylene blue (MB), respectively. The as-synthesized nanoparticles showed one of the best multiple catalytic activities in the industrially important (electro)-catalytic reduction of 4-nitrophenol (4-NP) to corresponding amines with noticeable reduced reaction time and increased rate constant without the use of any large area support. In addition, it exhibits peroxidase-like activity in the 3, 3', 5, 5'-Tetramethylbenzidine (TMB) color test and exhibit obvious difference with previous individual metal materials. By treated with high intensity focused ultrasound filed (HIFU), Pd-Cu NPs might be recrystallized and decreased the diameters than before. The enhancement in catalytic performance is observed obviously. This work expedites rational design and synthesis of the high-hierarchy alloy catalyst for biological and environment-friendly agents.

Effects of lipid bilayer encapsulation and lipid composition on the catalytic activity and colloidal stability of hydrophobic palladium nanoparticles in water

This article shows the preparation of a lipid-nanoparticle assembly (LNA) which contains hydrophobic palladium nanoparticles (PdNPs) within the hydrophobic regions of the liposomal micelles. To understand the colloidal stability and catalytic activity of LNAs, the structure–property relationships of LNAs are investigated by manipulating the lipid composition and reaction temperature. The studies of LNAs using dynamic light scattering (DLS), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM) show decreased colloidal stability with the incorporation of PdNPs compared to their counterpart 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) liposomes without PdNPs. LNAs with PdNPs catalyze the hydrogenation of 1-octene and its isomers to octane under one atm hydrogen gas and at room temperature within 24 h. The kinetic studies show that the isomerization of 1-octene to 2-octene occurs more favorably in the early stage of the reactions, which is followed by the subsequent hydrogenation of all octene isomers. The studies on temperature effects indicate that there is a significant increase in conversion yield of substrates when the reaction temperature increases from 22 to 37 °C, which correspond to room temperature and biological temperature, respectively. Phase transition of DSPC-PdNP LNAs from gel to liquid crystalline phase changing the fluidity of the bilayer is proposed to be the main reason for dramatic increases in the catalytic activity of the LNAs. It is also found that the rate of hydrogenation is dependent on the lipid composition of LNAs with the presence of cholesterol having a negative influence on the catalytic activity of LNAs while increasing their colloidal stability.

Hydrophobic micellization effect and dynamic lipid bilayer–substrate interactions enhance the catalytic activity of hydrophobic Pd nanoparticles embedded in liposomal assemblies.

Water-Soluble Noble Metal Nanoparticle Catalysts Capped with Small Organic Molecules for Organic Transformations in Water

This article recaps a variety of interesting catalytic studies based on solubilized and freely movable noble metal nanoparticle catalysts employed for organic reactions in either pure water or water-organic biphasic systems. Small organic ligand-capped metal nanoparticles are fundamentally attractive materials due to their enormous potential as a well-defined system that can provide spatial control near active catalytic sites. The nanoparticle catalysts are first grouped based on the synthetic method (direct reduction, phase transfer, and redispersion) and then again based on the type of reaction such as alkene hydrogenation, arene hydrogenation, nitroaromatic reduction, carbon-carbon coupling reactions, etc. The impacts of various ligands on the catalytic activity and selectivity of semi-heterogeneous nanoparticles in water are discussed in detail. The catalytic systems using polymers, dendrimers, and ionic liquids as supporting or protecting materials are excluded from the subject of this review.

Colloidal Palladium Nanoparticles for Selective Hydrogenation of Styrene Derivatives with Reactive Functional Groups

This article presents the catalysis investigation of octanethiolate-capped palladium nanoparticles (C8 PdNP) and phenylethanethiolate-capped palladium nanoparticles (PhC2 PdNP) for chemoselective catalytic hydrogenation reactions of styrene derivatives in the presence of other reducible functionalities. The results show that the C8 PdNP is highly active under mild reaction conditions (room temperature and atmospheric pressure) and selective for hydrogenating monosubstituted alkene groups without reducing other reactive functional groups such as nitro, halo, carbonyls, and so forth. In comparison, the noncovalent interactions between surface phenyl ligands and aromatic substrates are found to hinder the hydrogenation activity of PhC2 PdNP.

Isolated Effects of Surface Ligand Density on the Catalytic Activity and Selectivity of Palladium Nanoparticles

Alkanethiolate-capped palladium nanoparticles (PdNPs) have previously been synthesized by using a modified Brust-Schiffrin synthesis (using alkanethiosulfate instead of alkanethiol), in which the nanoparticle core size is established during alkanethiosulfate ligand passivation of the nanoparticle nucleation-growth initiated by borohydride reduction. Because of the dependence of core size on the amount of ligand present, surface ligand density decreases with increasing core size. Herein we present a method in which the core size is established independent of ligand addition, allowing the formation of PdNPs with similar core sizes yet different surface ligand densities. In this method, the core size is established during the temporary passivation of growing nanoparticles by borohydride and tetra-N-octylammonium bromide (TOAB), allowing nucleation to reach completion. Various molar equivalents of alkyl thiosulfate are then added, prompting the replacement of borohydride and TOAB and the formation of alkanethiolate-capped PdNPs. The resulting PdNPs were characterized by using ¹H NMR, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The overall enhanced catalytic activity of hydrogenation/isomerization of alkenes and dienes was observed for PdNPs with a lower ligand density, proving the isolated effect of surface ligand density from other variations such as core size and shape. Surface ligand density is also shown to influence the hydrogenation/isomerization product selectivity of the catalytic reactions by regulating the formation of certain Pd-substrate intermediates and the kinetic diffusion of surface hydrogen/substrates.

Engineering of Surface Environment of Pd Nanoparticle Catalysts on Carbon Support with Pyrene-Thiol Ligands for Semihydrogenation of Alkynes

A new type of pyrene-thiol derivative-modified Pd nanoparticle (NP) catalyst on a carbon black support for the efficient semihydrogenation of alkynes to alkenes is reported herein. Colloidal Pd NPs surrounded by pyrene-thiol modifiers were prepared using the two-phase Brust method followed by impregnation of carbon black materials. Based on the structural characterization of the prepared catalyst (PyC₁₂S-Pd/VC) by NMR, UV-vis, FT-IR, TEM, HAADF-STEM, Pd K-edge XAFS, XRD, N₂ adsorption, and XPS, we show that highly dispersed Pd NPs are immobilized on the catalysts via π-π interaction between pyrene groups bound to the Pd NPs and carbon black supports. PyC₁₂S-Pd/VC efficiently catalyzes the alkyne semihydrogenation reaction while maintaining high alkene selectivity; an alkene selectivity of 94% is attained at 98% conversion after 5 h of reaction, and the selectivity was retained around 80% in 10 h of reaction. This performance is superior to that of a catalyst without pyrene groups and that of a commercial Lindlar catalyst. The steric hindrance of pyrene groups restricts access of the substrates to Pd NP surfaces, suppressing the unfavorable overhydrogenation of alkenes to alkanes, which is revealed by the solvent and substrate dependency on the catalytic performance and a DFT calculation study. Furthermore, the high selectivity and stability of PyC₁₂S-Pd/VC are caused by the strong interaction between pyrene groups and carbon supports, which prevents the separation of pyrene modifiers and the leaching or sintering of Pd NPs during the catalytic reaction. It is demonstrated that the combination of Pd NPs, pyrene-thiol modifiers, and carbon supports offers high activity, alkene selectivity, and stability in the semihydrogenation reaction.

Synthesis of Alkanethiolate-Capped Metal Nanoparticles Using Alkyl Thiosulfate Ligand Precursors: A Method to Generate Promising Reagents for Selective Catalysis

Evaluation of metal nanoparticle catalysts functionalized with well-defined thiolate ligands can be potentially important because such systems can provide a spatial control in the reactivity and selectivity of catalysts. A synthetic method utilizing Bunte salts (sodium S-alkylthiosulfates) allows the formation of metal nanoparticles (Au, Ag, Pd, Pt, and Ir) capped with alkanethiolate ligands. The catalysis studies on Pd nanoparticles show a strong correlation between the surface ligand structure/composition and the catalytic activity and selectivity for the hydrogenation/isomerization of alkenes, dienes, trienes, and allylic alcohols. The high selectivity of Pd nanoparticles is driven by the controlled electronic properties of the Pd surface limiting the formation of Pd⁻alkene adducts (or intermediates) necessary for (additional) hydrogenation. The synthesis of water soluble Pd nanoparticles using ω-carboxylate-S-alkanethiosulfate salts is successfully achieved and these Pd nanoparticles are examined for the hydrogenation of various unsaturated compounds in both homogeneous and heterogeneous environments. Alkanethiolate-capped Pt nanoparticles are also successfully synthesized and further investigated for the hydrogenation of various alkynes to understand their geometric and electronic surface properties. The high catalytic activity of activated terminal alkynes, but the significantly low activity of internal alkynes and unactivated terminal alkynes, are observed for Pt nanoparticles.

Photocatalytic Transfer Hydrogenolysis of Allylic Alcohols on Pd/TiO2 : A Shortcut to (S)-(+)-Lavandulol

We report herein a regio- and stereoselective photocatalytic hydrogenolysis of allylic alcohols to form unsaturated hydrocarbons employing a palladium(II)-loaded titanium oxide; the reaction proceeds at room temperature under light irradiation without stoichiometric generation of salt wastes. Olefin and saturated alcohol moieties tolerated the reaction conditions. Hydrogen atoms were selectively incorporated into less sterically congested carbons of the allylic functionalities. This protocol allowed a short-step synthesis of (S)-(+)-lavandulol from (R)-(-)-carvone by avoiding otherwise necessary protection/deprotection steps.

Effects of Noncovalent Interactions on the Catalytic Activity of Unsupported Colloidal Palladium Nanoparticles Stabilized with Thiolate Ligands

This article presents the systematic evaluation of colloidal palladium nanoparticles functionalized with well-defined small organic ligands that provide spatial control of the geometric and electronic surface properties of nanoparticle catalysts. Palladium nanoparticles stabilized with thiolate ligands of different structures and functionalities (linear alkyl vs cyclohexyl vs phenyl) are synthesized using the thiosulfate protocol in a two-phase system. The structure and composition of palladium nanoparticles are characterized using transmission electron microscopy, thermogravimetric analysis, NMR, and UV-vis spectroscopies. The catalysis studies show that the chemical and structural compositions of monolayers surrounding the nanoparticle core greatly influence the overall activity and selectivity of colloidal palladium nanoparticle catalysts for the hydrogenation, isomerization, and hydrogenolysis of allylic alcohols. Especially, noncovalent interactions between surface phenyl ligands and incoming aromatic substrates are found to have a profound influence on the selectivity of colloidal palladium nanoparticles.

Alkanethiolate-capped palladium nanoparticles for selective catalytic hydrogenation of dienes and trienes

Selective hydrogenation of dienes and trienes is an important process in the pharmaceutical and chemical industries. Our group previously reported that the thiosulfate protocol using a sodium S-alkylthiosulfate ligand could generate catalytically active Pd nanoparticles (PdNP) capped with a lower density of alkanethio-late ligands. This homogeneously soluble PdNP catalyst offers several advantages such as little contamination via Pd leaching and easy separation and recycling. In addition, the high activity of PdNP allows the reactions to be completed under mild conditions, at room temperature and atmospheric pressure. Herein, a PdNP catalyst capped with octanethiolate ligands (C8 PdNP) is investigated for the selective hydrogenation of conjugated dienes into monoenes. The strong influence of the thiolate ligands on the chemical and electronic properties of the Pd surface is confirmed by mechanistic studies and highly selective catalysis results. The studies also suggest two major routes for the conjugated diene hydrogenation: the 1,2-addition and 1,4-addition of hydrogen. The selectivity between two mono-hydrogenation products is controlled by the steric interaction of substrates and the thermodynamic stability of products. The catalytic hydrogenation of trienes also results in the almost quantitative formation of mono-hydrogenation products, the isolated dienes, from both ocimene and myrcene.

Preparation of Partially Poisoned Alkanethiolate-Capped Platinum Nanoparticles for Hydrogenation of Activated Terminal Alkynes

Stable and isolable alkanethiolate-stabilized Pt nanoparticles (PtNP) were synthesized using the two-phase thiosulfate method with sodium S-alkylthiosulfate as ligand precursor. The mechanistic formation of octanethiolate-capped PtNP (Pt-SC₈) from both sodium S-octylthiosulfate and 1-octanethiol ligands was investigated by using ¹H NMR and UV-vis spectroscopies, which revealed the formation of different Pt complexes as the reaction intermediates. The synthesis using S-octylthiosulfate ligand precursor produced Pt-SC₈ in higher yields than that using 1-octanethiol ligand. The obtained nanoparticles were characterized by ¹H NMR, UV-vis spectroscopy, infrared spectroscopy (IR), thermogravimetric analysis, and transmission electron microscopy (TEM). The results obtained from ¹H NMR, IR, and UV-vis spectroscopy were consistent with the formation of stable and pure alkanethiolate-capped PtNP. TEM images of PtNP confirmed their small average core size (∼1.5 nm) and high monodispersity. The partially poisoned PtNP with thiolate monolayer ligands were further investigated for the hydrogenation of various alkynes to understand the organic ligands-induced geometric and electronic surface properties of colloidal Pt nanoparticle catalysts. The high catalytic activity of activated terminal alkynes, but the significantly low activity of internal alkynes and unactivated terminal alkynes, were observed under the mild reaction conditions (room temperature and atmospheric pressure). These results indicated that the presence of alkanethiolate ligands could decrease the coordination activity of PtNP surface especially for the bulkier and unactivated substrates.

Long-Range Olefin Isomerization Catalyzed by Palladium(0) Nanoparticles

Long-range olefin isomerization of 2-alkenylbenzoic acid derivatives going through two to five sp³-carbon atoms to give (E)-alkenes was achieved with palladium(0) nanoparticles. The substrate scope of this reaction includes carboxylic acid, ester, and primary to tertiary amides and tolerates various substituents on the benzene ring. This isomerization reaction was catalyzed by recyclable Pd(0) nanoparticles, prepared in situ from PdCl₂ and characterized by X-ray powder diffraction and scanning electron microscopy analyses. ¹H NMR studies and kinetic modeling supported a stepwise process. This new process was applied to synthesize a natural dihydroisocoumarin with good efficiency.

Unsupported Micellar Palladium Nanoparticles for Biphasic Hydrogenation and Isomerization of Hydrophobic Allylic Alcohols in Water

This article presents the evaluation of water-soluble palladium nanoparticles with hydrophobic active sites that are ideal for the biphasic colloidal catalysis of water-insoluble organic substrates in aqueous solution. Palladium nanoparticles stabilized with ω-carboxylate-functionalized alkanethiolate are first synthesized using ω-carboxylate-S-alkylthiosulfate as their ligand precursor. The biphasic catalysis is carried out for the reaction of hydrophobic allylic alcohols without using any additional mixing solvent or surfactant, which results in the complete consumption of substrates under the atmospheric pressure of H₂ gas and at room temperature in less than 24 h. Systematic investigations on the influence of pH and substrate size are also performed to examine the utility of these thiolate-capped palladium nanoparticles as structurally stable and water-soluble micellar catalysts for the biphasic reaction.

Influence of Graphene Oxide Supports on Solution-Phase Catalysis of Thiolate-Protected Palladium Nanoparticles in Water

The influence of graphene oxide supports and thiolate surface ligands on the catalytic activity of colloidal Pd nanoparticles for alkyne hydrogenation in water is investigated. The studies show that unsupported, water-soluble thiolate-capped Pd nanoparticle catalysts favor the semi-hydrogenation over full-hydrogenation of dimethyl acetylene dicarboxylate (DMAD) under the atmospheric pressure and at room temperature. Pd nanoparticles supported on graphene oxide exhibit a similar activity for the hydrogenation of DMAD, but they show an improved long-term colloidal stability in aqueous solution after multiple catalytic cycles. After the heat treatment of Pd nanoparticles supported on graphene oxide at 300 °C, these heated hybrids exhibit an enhanced catalytic activity towards the full-hydrogenation. Overall, the studies suggest some influences of graphene oxide supports on the stability and thiolate surface ligands on the activity and selectivity of Pd nanoparticle catalysts.

Selective hydrogenation of α-pinene to cis-pinane over Ru nanocatalysts in aqueous micellar nanoreactors

Hydrogenation of α-pinene took place in the lipophilic core between the metal and the hydrogen-containing micelles.

Mechanistic interpretation of selective catalytic hydrogenation and isomerization of alkenes and dienes by ligand deactivated Pd nanoparticles

Unsupported thiolate-capped palladium nanoparticle catalysts are found to be highly substrate-selective for alkene hydrogenation and isomerization. Steric and poisoning effects from thiolate ligands on the nanoparticle surface control reactivity and selectivity by influencing alkene adsorption and directing either di-σ or mono-σ bond formation. The presence of overlapping p orbitals and α protons in alkenes greatly influences the catalytic properties of deactivated palladium nanoparticles leading to easily predictable hydrogenation or isomerization products.

Catalytic Properties of Unsupported Palladium Nanoparticle Surfaces Capped with Small Organic Ligands

This Minireview summarizes a variety of intriguing catalytic studies accomplished by employing unsupported, either solubilized or freely mobilized, and small organic ligand-capped palladium nanoparticles as catalysts. Small organic ligands are gaining more attention as nanoparticle stabilizers and alternates to larger organic supports, such as polymers and dendrimers, owing to their tremendous potential for a well-defined system with spatial control in surrounding environments of reactive surfaces. The nanoparticle catalysts are grouped depending on the type of surface stabilizers with reactive head groups, which include thiolate, phosphine, amine, and alkyl azide. Applications for the reactions such as hydrogenation, alkene isomerization, oxidation, and carbon-carbon cross coupling reactions are extensively discussed. The systems defined as "ligandless" Pd nanoparticle catalysts and solvent (e.g. ionic liquid)-stabilized Pd nanoparticle catalysts are not discussed in this review.

Hydrogenation of allyl alcohols catalyzed by aqueous palladium and platinum nanoparticles

Hydrogenations of allyl alcohols in aqueous media, at room temperature and pressure, were performed in presence of Pd or Pt lignin nanoparticles as catalysts to obtain saturated alcohols.

Mechanistic Insights into the Formation of Dodecanethiolate-Stabilized Magnetic Iridium Nanoparticles: Thiosulfate vs Thiol Ligands

The synthesis of stable and isolable iridium nanoparticles with an average core size of ∼1.2 ± 0.3 nm was achieved by employing sodium S-dodecylthiosulfate as a ligand precursor during the modified Brust-Schiffrin reaction. Transmission electron microscopy (TEM) of the isolated Ir nanoparticles revealed a high degree of monodispersity. Further characterizations with ¹H NMR, FT-IR, UV-vis spectroscopy, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS) confirmed that the synthesized Ir nanoparticles are stabilized by dodecanethiolate ligands produced upon the adsorption/cleavage of S-dodecylthiosulfate on the growing Ir nanoparticle surface. By comparison, synthetic attempts employing dodecanethiol as a stabilizing ligand led to the formation of Ir-thiolate species (Ir(SR)₃) as an intermediate and Ir-hydroxide species at the completion of reaction. Mechanistic investigations of these two reactions using S-dodecylthiosulfate and dodecanethiol provided deeper understandings on the novelty of thiosulfate ligands, which allow the successful formation of stable thiolate-capped Ir nanoparticles. Moreover, these Ir nanoparticles were shown to have strong magnetic properties.

Use of tyrosyl bolaamphiphile self-assembly as a biochemically reactive support for the creation of palladium catalysts

The self-assembly of tyrosine-containing bolaamphiphile was applied as a catalyst support on which palladium (Pd) catalysts were loaded to exploit the biochemical activity of tyrosine. The bolaamphiphile self-assembled to form spherical structures exposing tyrosine moieties on the surface. The phenyl group of tyrosine was then used to create the Pd catalyst on the spherical self-assembly. Silver (Ag) clusters were decorated on the surface, exploiting the reducing function of the phenyl group. These Ag clusters were further applied to create Pd catalysts through the galvanic replacement reaction in the next step. The produced Pd catalyst showed reliable catalytic activity in decomposing dichromate with a pseudo-first-order reaction rate. The reaction rate constant increased proportionally to the Pd loading on the self-assembly support. In addition, as a solid support, the bolaamphiphile self-assembly made catalyst recovery easy, and the recovered Pd catalysts showed consistent activity after several cycles. The experimental results demonstrated that the bolaamphiphile self-assembly is a promising organic support with biochemical activity for the facile creation of metallic catalysts.

Heat-induced coarsening of layer-by-layer assembled mixed Au and Pd nanoparticles

This article shows the coarsening behavior of nanoparticle multilayers during heat treatments which produce larger metallic nanostructures with varying shapes and sizes on glass slides. Nanoparticle multilayer films are initially constructed via the layer-by-layer self-assembly of small and monodispersed gold and/or palladium nanoparticles with different compositions (gold only, palladium only, or both gold and palladium) and assembly orders (compounding layers of gold layers over palladium layers or vice versa). Upon heating the slides at 600°C, the surface nanoparticles undergo coalescence becoming larger nanostructured metallic films. UV-Vis results show a clear reliance of the layering sequence on the optical properties of these metal films, which demonstrates an importance of the outmost (top) layers in each nanoparticle multilayer films. Topographic surface features show that the heat treatments of nanoparticle multilayer films result in the nucleation of nanoparticles and the formation of metallic cluster structures. The results confirm that different composition and layering sequence of nanoparticle multilayer films clearly affect the coalescence behavior of nanoparticles during heat treatments.