Vertical arrays of SiO2 micro/nanotubes templated from Si pillars by chemical oxidation for high loading capacity buoyant aquatic devices

Atmospheric Gas-Phase Catalyst Etching of SiO2 for Deep Microfabrication Using HF Gas and Patterned Photoresist

Micro/nanoscale structure fabrication is an important process for designing miniaturized devices. Recently, three-dimensional (3D) integrated circuits using SiO2 via-holes interlayer filling by copper have attracted attention to extend the lifetime of Moore's law. However, the fabrication of vertical and smooth-sidewall via-hole structures on SiO2 has not been achieved using the conventional dry etching method due to the limitation of the selective etching ratio of SiO2 and hard mask materials. In this study, we developed a unique method for the deep anisotropic dry etching of SiO2 using atmospheric gas-phase HF and a patterned photoresist. The hydroxyl groups in the photoresist catalyzed the HF gas-phase dry etching of SiO2 at high-temperature conditions. Therefore, fabrication of vertical with smooth-sidewall deep microstructures was demonstrated in the photoresist-covered area on SiO2 at a processing rate of 1.3 μm/min, which is 2-3 times faster than the conventional dry etching method. Additionally, the chemical reaction pathway in the photoresist-covered area on SiO2 with HF gas was revealed via density functional theory (DFT) calculations. This simple and high-speed microfabrication process will expand the commercial application scope of next-generation microfabricated SiO2-based devices.

Structuring of Si into Multiple Scales by Metal-Assisted Chemical Etching

Structuring Si, ranging from nanoscale to macroscale feature dimensions, is essential for many applications. Metal-assisted chemical etching (MaCE) has been developed as a simple, low-cost, and scalable method to produce structures across widely different dimensions. The process involves various parameters, such as catalyst, substrate doping type and level, crystallography, etchant formulation, and etch additives. Careful optimization of these parameters is the key to the successful fabrication of Si structures. In this review, recent additions to the MaCE process are presented after a brief introduction to the fundamental principles involved in MaCE. In particular, the bulk-scale structuring of Si by MaCE is summarized and critically discussed with application examples. Various approaches for effective mass transport schemes are introduced and discussed. Further, the fine control of etch directionality and uniformity, and the suppression of unwanted side etching are also discussed. Known application examples of Si macrostructures fabricated by MaCE, though limited thus far, are presented. There are significant opportunities for the application of macroscale Si structures in different fields, such as microfluidics, micro-total analysis systems, and microelectromechanical systems, etc. Thus more research is necessary on macroscale MaCE of Si and their applications.

Direct Visualization of Etching Trajectories in Metal-Assisted Chemical Etching of Si by the Chemical Oxidation of Porous Sidewalls

We demonstrate a simple method for the visualization of trajectories traced by noble metal nanoparticles during metal-assisted chemical etching (MaCE) of Si. The nanoporous Si layer formed around drilled pores is converted into SiO2 by simple chemical oxidation. Etch removal of the remaining Si using alkali hydroxide leaves SiO2 nanostructures that are the exact replica of those drilled pores or etching trajectories. The differences in etching characteristics between Ag and Au have been investigated using the proposed visualization method. The shape and chemical stability of metal nanoparticles used for MaCE have been found to be critical in determining etching paths. The proposed method would be very helpful in studying the fundamental mechanism of MaCE as well as in micro/nanostructuring of the Si surface for various applications. This approach can also be used for the generation of straight or helical SiO2 nanotubes.