A new class of red fluorescent organic nanoparticles: noncovalent fabrication and cell imaging applications

Fabrication and Impact of Fouling-Reducing Temperature-Responsive POEGMA Coatings with Embedded CaCO3 Nanoparticles on Different Cell Lines

In the present work, we have successfully prepared and characterized novel nanocomposite material exhibiting temperature-dependent surface wettability changes, based on grafted brush coatings of non-fouling poly(di(ethylene glycol)methyl ether methacrylate) (POEGMA) with the embedded CaCO3 nanoparticles. Grafted polymer brushes attached to the glass surface were prepared in a three-step process using atom transfer radical polymerization (ATRP). Subsequently, uniform CaCO3 nanoparticles (NPs) embedded in POEGMA-grafted brush coatings were synthesized using biomineralized precipitation from solutions of CaCl2 and Na2CO3. An impact of the low concentration of the embedded CaCO3 NPs on cell adhesion and growth depends strongly on the type of studied cell line: keratinocytes (HaCaT), melanoma (WM35) and osteoblastic (MC3T3-e1). Based on the temperature-responsive properties of grafted brush coatings and CaCO3 NPs acting as biologically active substrate, we hope that our research will lead to a new platform for tissue engineering with modified growth of the cells due to the release of biologically active substances from CaCO3 NPs and the ability to detach the cells in a controlled manner using temperature-induced changes of the brush.

Nanoparticles in sustainable agriculture: An emerging opportunity

Conventional agriculture often relies on bulky doses of fertilizers and pesticides that have adversely affected the living beings as well as the ecosystems. As a basic tenet of sustainable agriculture, minimum agrochemicals should be used so that the environment can be protected and various species can be conserved. Further, sustainable agriculture should be a low input system, where the production costs are lower and net returns are higher. The application of nanotechnology in agriculture can significantly enhance the efficiency of agricultural inputs and thus it offers a significant way to maintain sustainable development of agroecosystems via nanoparticles. In this regard, nano-plant growth promoters, nanopesticides, nanofertilizers, nano-herbicides, agrochemical encapsulated nanocarrier systems etc. have been developed for the potential applications in agriculture. These can have great benefits for agriculture, including higher production of crops, inhibition of plant pathogens, removal of unwanted weeds and insects with lesser cost, energy and waste production. However, there are several concerns related to the use of nanoparticles in agriculture. These include the approaches for synthesis, their mechanisms of penetration to applied surfaces and the risks involved. Though, advent of new technologies has significantly improved the synthesis and application of nanomaterials in agriculture, there are many uncertainties regarding nano-synthesis, their way of utilization, uptake and internalization inside the crop cells. Therefore, an elaborate investigation is required for deciphering the engineered nanomaterials, assessing their mechanistic application and agroecological toxicity. Hence, this review is aimed to critically highlight the NPs material application and points towards the vital gaps in the use of nanotechnology for sustainable agriculture.

Recent Advances in Polymeric Nanocomposites of Metal-Organic Frameworks (MOFs)

Recently, metal-organic frameworks (MOFs) have garnered enormous attention from researchers owing to their superior physicochemical properties, which are of particular interest in various fields such as catalysis and the diverse areas of biomedicine. Despite their position in the utilization for various applications compared to other innovative nanocarriers such as dendrimers and mesoporous silica nanoparticles (MSNs), in terms of advantageous physicochemical attributes, as well as attractive textural properties, ease of characterization, and abundant surface chemistry for functionalization and other benefits, MOFs yet suffer from several issues such as poor degradability, which might lead to accumulation-induced biocompatibility risk. In addition, some of the MOFs suffer from a shortcoming of poor colloidal stability in the aqueous solution, hindering their applicability in diverse biomedical fields. To address these limitations, several advancements have been made to fabricate polymeric nanocomposites of MOFs for their utility in various biomedical fields. In this review, we aim to provide a brief emphasis on various organic polymers used for coating over MOFs to improve their physicochemical attributes considering a series of recently reported intriguing studies. Finally, we summarize with perspectives.

Functionalized Acrylonitriles with Aggregation-Induced Emission: Structure Tuning by Simple Reaction-Condition Variation, Efficient Red Emission, and Two-Photon Bioimaging

Acrylonitriles with aggregation-induced emission (AIE) characteristics have been found to show promising applications in two-photon biomedical imaging. Generally, elaborate synthetic efforts are required to achieve different acrylonitriles with distinct functionalities. In this work, we first reported the synthesis of two different group-functionalized AIE-active acrylonitriles (TPAT-AN-XF and 2TPAT-AN) obtained simply by mixing the same reactants at different temperatures using a facile and transition metal-free synthetic method. These two AIE luminogens (AIEgens) exhibit unique properties such as bright red emission in the solid state, large Stokes shift, and large two-photon absorption cross section. Water-soluble nanoparticles (NPs) of 2TPAT-AN were prepared by a nanoprecipitation method. In vitro imaging data show that 2TPAT-AN NPs can selectively stain lysosome in live cells. Besides one-photon imaging, remarkable two-photon imaging of live tumor tissues can be achieved with high resolution and deep tissue penetration. 2TPAT-AN NPs show high biocompatibility and are successfully utilized in in vivo long-term imaging of mouse tumors with a high signal-to-noise ratio. Thus, the present work is anticipated to shed light on the preparation of a library of AIE-active functionalized acrylonitriles with intriguing properties for biomedical applications.

Dual red-NIR luminescent EuYb heterolanthanide nanoparticles as promising basis for cellular imaging and sensing

The present work introduces ternary Ln(III) (Ln = Eu, Yb, Lu) complexes with thenoyltriflouro1,3-diketonate (TTA^-) and phosphine oxide derivative (PhO) as building blocks for core-shell nanoparticles with both Eu(III)- or Yb(III)-centered luminescence and the dual Eu(III)-Yb(III)-centered luminescence. Solvent-mediated self-assembly of the complexes is presented herein as the procedure for formation of EuLu, EuYb and YbLu heterometallic or homometallic cores coated by hydrophilic polystyrenesulfonate-based shells. Steady state and time resolved Eu-centered luminescence in homolanthanide and heterolanthanide EuLu and EuYb cores is affected by Eu → Eu and Eu → Yb energy transfer due to a close proximity of the lanthanide blocks within the core of nanoparticles. The Eu → Yb energy transfer is highlighted to be the reason for the enhancement of the NIR Yb-centered luminescence. Efficient cellular uptake, low cytotoxicity towards normal and cancer cells, and sensing ability of EuYb nanoparticles on lomefloxacin additives via both red and NIR channels make them promising as cellular imaging agents and sensors.

To what extent do polymeric stabilizers affect nanoparticles characteristics?

Colloidal synthesis of nanoparticles using polymeric stabilizers as a template of a structure directing agent provided a plethora of opportunities in fabricating nanoparticles (NPs) with controlled size, shape, composition and structural characteristics. To understand the complete potency of polymeric stabilizers during the synthesis of nanoparticles, the relationship between polymer characteristics such as structure, molecular weight and concentration and nanoparticles characteristics is discussed in depth. This review portrays the use of polymers to attain nanostructured materials via covalent and non-covalent approaches. These polymers can also serve as surfaces modifier as well as the growth regulators during the synthesis of nanomaterials. The effect provided by polymers that directs the formation of nanomaterials into desired forms is otherwise hard to achieve. We especially spotlight on the approaches for tuning the characteristic properties of nanoparticles via cautious choice of the polymer system with special focus to stimuli-responsive polymers. This review mainly focusses on answering the main challenging question; what is the ideal polymeric stabilizer system to obtain specific morphology, size and phase structure of nanoparticles? Such vital information will enable rational design of nanoparticles to meet specific needs for different applications.

Organic Fluorescent Dye-based Nanomaterials: Advances in the Rational Design for Imaging and Sensing Applications

Self-assembled fluorescent nanomaterials based on small-molecule organic dyes are gaining increasing popularity in imaging and sensing applications over the past decade. This is primarily due to their ability to combine spectral properties tunability and biocompatibility of small molecule organic fluorophores with brightness, chemical and colloidal stability of inorganic materials. Such a unique combination of features comes with rich versatility of dye-based nanomaterials: from aggregates of small molecules to sophisticated core-shell nanoarchitectures involving hyperbranched polymers. Along with the ongoing discovery of new materials and better ways of their synthesis, it is very important to continue systematic studies of fundamental factors that regulate the key properties of fluorescent nanomaterials: their size, polydispersity, colloidal stability, chemical stability, absorption and emission maxima, biocompatibility, and interactions with biological interfaces. In this review, we focus on the systematic description of various types of organic fluorescent nanomaterials, approaches to their synthesis, and ways to optimize and control their characteristics. The discussion is built on examples from reports on recent advances in the design and applications of such materials. Conclusions made from this analysis allow a perspective on future development of fluorescent nanomaterials design for biomedical and related applications.

Simple One-Pot Preparation of a Rapid Response AIE Fluorescent Metal-Organic Framework

Luminogenic materials, particularly those that have turn-on response by sensing the analytes, are highly regarded as optical instruments, sensing material, fluorescent probes, etc. However, most of these materials are only usable in dilute form and often show the self-quenching effect at high concentrations. The use of light-emitting AIE-based materials (aggregation-induced emission) is the solution of this problem. The rigid structure of these active fluorescence ligands, which contains several aromatic rings attached to each other, does not lose its fluorescence properties by increasing the concentration. Unlike other AIE ligands, which have a complex or multistep synthetic route, here, we present a simple one-pot method for in situ synthesis of the AIE ligand and the metal-organic framework (MOF) contained therein. Presence of metal nodes having varied outer-shell electron configurations affects the fluorescence intensity of these materials and, thus, both high and low emissive "turn on" MOFs were readily acquired. Based on the possible interactions between the free nitrogens on the ligand and the phenolic compounds, the MOFs enable highly selective and sensitive detection of phenol derivatives in several seconds with low detection limits (less than 65 nM for 4-aminophenol and 120 nM for phenol) through turn-on emission fluorescence.

Novel fluorescent organic nanoparticles as a label-free biosensor for dopamine in serum

Fluorescent organic nanoparticles composed of an organic dye and a triblock copolymer have been constructed and utilized as a fluorescent biosensor for dopamine.

Recent developments in polydopamine: an emerging soft matter for surface modification and biomedical applications

After more than four billion years of evolution, nature has created a large number of fascinating living organisms, which show numerous peculiar structures and wonderful properties. Nature can provide sources of plentiful inspiration for scientists to create various materials and devices with special functions and uses. Since Messersmith proposed the fabrication of multifunctional coatings through mussel-inspired chemistry, this field has attracted considerable attention for its promising and exiciting applications. Polydopamine (PDA), an emerging soft matter, has been demonstrated to be a crucial component in mussel-inspired chemistry. In this review, the recent developments of PDA for mussel-inspired surface modification are summarized and discussed. The biomedical applications of PDA-based materials are also highlighted. We believe that this review can provide important and timely information regarding mussel-inspired chemistry and will be of great interest for scientists in the chemistry, materials, biology, medicine and interdisciplinary fields.

Strong green fluorescent hydrogels with Ba2 MgSi2 O7 :Eu2+ phosphor embedded in cellulose

Non-cytotoxic and green-emitting fluorescent hydrogels were constructed from a cellulose solution containing Ba₂ MgSi₂ O₇ :Eu²⁺ green phosphor in a NaOH/urea aqueous system. The structure, optical properties and cytotoxicity of these hydrogels were studied. The Ba₂ MgSi₂ O₇ :Eu²⁺ phosphor particles were dispersed evenly in the cellulose hydrogel matrix. Good luminescent properties of Ba₂ MgSi₂ O₇ :Eu²⁺ phosphor were maintained in the hydrogels, leading to strong green emission under ultraviolet excitation. Fluorescent hydrogels have no obvious cytotoxicity in a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) proliferation test, and have potential use in in vivo applications like optical imaging and drug delivery.

Deep-red to near-infrared fluorescent dyes: Synthesis, photophysical properties, and application in cell imaging

More and more attention has been paid to the design of new fluorescent imaging agents with good photostability and water solubility, especially those with emissions in the deep-red and near-infrared regions. In this work, we designed and synthesized four novel fluorescent dyes with deep-red or NIR fluorescence by hybridizing coumarin and pyronin moieties based on our previous work. Introduction of carboxylic acid in the dyes not only imparted the dyes with water solubility but also provided a versatile sensing platform for designing the fluorescent probes and sensors of biomolecules. The photophysical properties of these new dyes were investigated through absorption and fluorescence spectroscopy. Cell imaging experiments showed that esterification products could selectively stain lysosomes with good photostability, thereby indicating that they could be useful in the development of fluorescent probes for bioimaging.

Aggregation-induced emission enhancement and living cell imaging of novel diarylanthracene conjugated dyes

Diarylanthracene conjugated dyes with good aggregation-induced emission enhancement (AIEE) properties were synthesized and their BSA nanoparticles were successfully used in HeLa cell imaging.

Fluorophores based on a minimal thienylthiazole core: towards multifunctional materials with solid state red emissions, solvatochromism and AIE behaviour

Minimal architecture solid red emissive D–A–D–A tetrads were built on a thienylthiazole core and their photophysical properties were investigated.

Fabrication and biomedical applications of AIE active nanotheranostics through the combination of a ring-opening reaction and formation of dynamic hydrazones

AIE active nanotheranostics were fabricated through a ring-opening reaction and formation of a dynamic hydrazone bond.

Aggregation induced emission amphiphile with an ultra low critical micelle concentration: fabrication, self assembling, and cell imaging

A novel aggregation induced emission amphiphile is constructed, containing a tetraphenylethene hydrophobic moiety connected to a hydrophilic quarternary ammonium salt. Owing to an ultra low critical micelle concentration in water, the amphiphile tends to self assemble into well-defined organic nanoaggregates that exhibit intense fluorescence, stable dispersibility in dilute solutions, and excellent biocompatibility for cell imaging.

Polymeric AIE-based nanoprobes for biomedical applications: recent advances and perspectives

The development of polymeric luminescent nanomaterials for biomedical applications has recently attracted a large amount of attention due to the remarkable advantages of these materials compared with small organic dyes and fluorescent inorganic nanomaterials. Among these polymeric luminescent nanomaterials, polymeric luminescent nanomaterials based on dyes with aggregation-induced emission (AIE) properties should be of great research interest due to their unique AIE properties, the designability of polymers and their multifunctional potential. In this review, the recent advances in the design and biomedical applications of polymeric luminescent nanomaterials based on AIE dyes is summarized. Various design strategies for incorporation of these AIE dyes into polymeric systems are included. The potential biomedical applications such as biological imaging, and use in biological sensors and theranostic systems of these polymeric AIE-based nanomaterials have also been highlighted. We trust this review will attract significant interest from scientists from different research fields in chemistry, materials, biology and interdisciplinary areas.

Deep-red emissive crescent-shaped fluorescent dyes: substituent effect on live cell imaging

A series of crescent-shaped fluorescent dyes (CP1-CP6) were synthesized by hybridizing coumarin and pyronin moieties with different amino substituents at both ends. The molecular structures and photophysical properties of these fluorescent dyes were investigated through X-ray diffraction, absorption spectroscopy, and fluorescence spectroscopy. Results show that the fluorescent dyes exhibited crescent-shaped structures, deep-red emissions (approximately 650 nm), and significant Stokes shifts. In live-cell-imaging experiments, CP1 stains mitochondria, whereas CP3 and CP6 stain the lysosomes in a cytoplasm and the RNA in nucleoli. The relationships between different amino substituent groups and the imaging properties of CP dyes were discussed as well. Additionally, findings from the cytotoxicity and photostability experiments on living cells indicated the favorable biocompatibility and high photostability of the CP dyes.

Concentration-dependent and light-responsive self-assembly of bolaamphiphiles bearing α-cyanostilbene based photochromophore

In this paper, a new bolaamphiphile bearing 1-cyano-1,2-bis(phenyl)ethene (CNBE) has been synthesized. The self-assembly of this molecule in aqueous solution is concentration-dependent. Two distinct morphologies, monomolecular layered lamellas and helical nanofibres have been obtained with the as-prepared molecular configuration. Note worthily, the helical nanofibres provide an experimental evidence for the pure twisted structure in the liquid crystals, which is theoretically proposed by De Gennes. Due to the photoisomerization of CNBE, the self-assembled nanostructures undergo morphological changes upon irradiation. Although various nanostructures were observed in the solution-state, only nanofibres were obtained after the solution was cast on a substrate, which was attributed to a strong dewetting effect. This work illustrates concentration-dependent and light-responsive self-assembly and provides a novel avenue for fabricating smart soft materials.

A rather facile strategy for the fabrication of PEGylated AIE nanoprobes

A rather facile strategy was developed for the preparation of PEG-TPE FNPs taking advantage of the different reaction activities of anhydride and chloride toward PEG and DATPE.

A macrocyclic oligoelectrolyte as a facial platform for absorbing hyaluronic acid oligomers for targeted cancer cellular imaging

A macrocyclic oligoelectrolyte with a unique 3D rigid structure modified by hyaluronic acid was developed for targeted cancer cellular imaging, for the first time.

Morphology-controlled dual clickable nanoparticles via ultrasonic-assisted click polymerization

Morphology-controlled dual clickable nanoparticles (DCNPs) were synthesized in one stepviaultrasonic-assisted azide–alkyne click polymerization.

Red fluorescent cross-linked glycopolymer nanoparticles based on aggregation induced emission dyes for cell imaging

Aggregation induced emission dye based cross-linked fluorescent glycopolymer nanoparticles with red emission: their synthesis, characterization and application for cell imaging.

Solvatochromic fluorescent BODIPY derivative as imaging agent in camptothecin loaded hexosomes for possible theranostic applications

Tumor cell-targeted hexosomes simultaneously loaded with pyrene-modified BODIPY and camptothecin are easily internalized by HeLa cells.

Two-photon pumped emission of polymeric thin film doped with dicyanopyranone derivative

Two-photon pumped up-conversion emission of polymeric thin film doped with a fluorophore dye has been developed.

Preparation of biocompatible and photostable PEGylated red fluorescent nanoparticles for cellular imaging

Biocompatible and photostable PEGylated red fluorescent nanoparticles were preparedviasurface-initiated ATRP and their cellular imaging application was successfully demonstrated.