Investigation of interfacial adhesion between the top ends of carbon nanotubes

High-Temperature-Operable Electromechanical Computing Units Enabled by Aligned Carbon Nanotube Arrays

Nano/micro-electromechanical (NEM/MEM) contact switches have great potential as energy-efficient and high-temperature-operable computing units to surmount those limitations of transistors. However, despite recent advances, the high-temperature operation of the mechanical switch is not fully stable nor repetitive due to the melting and softening of the contact material in the mechanical switch. Herein, MEM switches with carbon nanotube (CNT) arrays capable of operating at high temperatures are presented. In addition to the excellent thermal stability of CNT arrays, the absence of a melting point of CNTs allows the proposed switches to operate successfully at up to 550 °C, surpassing the maximum operating temperatures of state-of-the-art mechanical switches. The switches with CNTs also show a highly reliable contact lifetime of over 1 million cycles, even at a high temperature of 550 °C. Moreover, symmetrical pairs of normally open and normally closed MEM switches, whose interfaces are initially in contact and separated, respectively, are introduced. Consequently, the complementary inverters and logic gates operating at high temperatures can be easily configured such as NOT, NOR, and NAND gates. These switches and logic gates reveal the possibility for developing low-power, high-performance integrated circuits for high-temperature operations.

Carbon nanotube-graphene hybrids for soft electronics, sensors, and actuators

Soft devices that are mechanically flexible and stretchable are considered as the building blocks for various applications ranging from wearable devices to robotics. Among the many candidate materials for constructing soft devices, carbon nanomaterials such as carbon nanotubes (CNTs) and graphene have been actively investigated owing to their outstanding characteristics, including their intrinsic flexibility, tunable conductivity, and potential for large-area processing. In particular, hybrids of CNTs and graphene can improve the performance of soft devices and provide them with novel capabilities. In this review, the advances in CNT-graphene hybrid-based soft electrodes, transistors, pressure and strain sensors, and actuators are discussed, highlighting the performance improvements of these devices originating from the synergistic effects of the hybrids of CNT and graphene. The integration of multidimensional heterogeneous carbon nanomaterials is expected to be a promising approach for accelerating the development of high-performance soft devices. Finally, current challenges and future opportunities are summarized, from the processing of hybrid materials to the system-level integration of multiple components.

Substrate adhesion evolves non-monotonically with processing time in millimeter-scale aligned carbon nanotube arrays

The advantageous intrinsic and scale-dependent properties of aligned nanofibers (NFs) and their assembly into 3D architectures motivate their use as dry adhesives and shape-engineerable materials. While controlling NF-substrate adhesion is critical for scaled manufacturing and application-specific performance, current understanding of how this property evolves with processing conditions is limited. In this report, we introduce substrate adhesion predictive capabilities by using an exemplary array of NFs, aligned carbon nanotubes (CNTs), studied as a function of their processing. Substrate adhesion is found to scale non-monotonically with process time in a hydrocarbon environment and is investigated via the tensile pull-off of mm-scale CNT arrays from their growth substrate. CNT synthesis follows two regimes: Mode I ('Growth') and Mode II ('Post-Growth'), separated by growth termination. Within 10 minutes of post-growth, experiments and modeling indicate an order-of-magnitude increase in CNT array-substrate adhesion strength (∼40 to 285 kPa) and effective elastic array modulus (∼6 to 47 MPa), and a two-orders-of-magnitude increase in the single CNT-substrate adhesion force (∼0.190 to 12.3 nN) and work of adhesion (∼0.07 to 1.5 J m^-2), where the iron catalyst is found to remain on the substrate. Growth number decay in Mode I and carbon accumulation in Mode II contribute to the mechanical response, which may imply a change in the deformation mechanism. Predictive capabilities of the model are assessed for previously studied NF arrays, suggesting that the current framework can enable the future design and manufacture of high-value NF array applications.

Selective Carbon Material Engineering for Improved MEMS and NEMS

The development of micro and nano electromechanical systems and achievement of higher performances with increased quality and life time is confronted to searching and mastering of material with superior properties and quality. Those can affect many aspects of the MEMS, NEMS and MOMS design including geometric tolerances and reproducibility of many specific solid-state structures and properties. Among those: Mechanical, adhesion, thermal and chemical stability, electrical and heat conductance, optical, optoelectronic and semiconducting properties, porosity, bulk and surface properties. They can be affected by different kinds of phase transformations and degrading, which greatly depends on the conditions of use and the way the materials have been selected, elaborated, modified and assembled. Distribution of these properties cover several orders of magnitude and depend on the design, actually achieved structure, type and number of defects. It is then essential to be well aware about all these, and to distinguish and characterize all features that are able to affect the results. For this achievement, we point out and discuss the necessity to take into account several recently revisited fundamentals on carbon atomic rearrangement and revised carbon Raman spectroscopy characterizing in addition to several other aspects we will briefly describe. Correctly selected and implemented, these carbon materials can then open new routes for many new and more performing microsystems including improved energy generation, storage and conversion, 2D superconductivity, light switches, light pipes and quantum devices and with new improved sensor and mechanical functions and biomedical applications.