Janus-compartmental alginate microbeads having polydiacetylene liposomes and magnetic nanoparticles for visual lead(II) detection

Insights into emulsion synthesis of self-assembled suprastructures formed by Janus silica particles with -NH2/-SH surface groups

Spherical particles with tunable anisotropic structures enabled by multiple surface functionalities have garnered interest for their potential applications in adsorption technologies. The presence of diverse functional groups in the surface layer, exhibiting varying acidity and hydrophilicity, can lead to unique characteristics in terms of surface structure and behaviour. In this study, the particles were synthesised using a two-step approach involving surface functionalisation of previously synthesised SiO2 Stöber particles. This was achieved by employing 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) in a toluene-in-water emulsion. The resulting particles were found to be nonporous, with a specific surface area of 8 m2 g-1. Their sizes were determined to be up to 350 nm through photon cross-correlation spectroscopy. Moreover, the particles exhibited a high net content of functional groups (both amino and mercapto) of 2 mmol g-1. The organisation of the particles during synthesis was observed through SEM images, providing insights into their structural characteristics. Additionally, the study of Eu(iii), Au(iii), and Ag(i) ions and fluorescein adsorption demonstrated varying interactions on the surface, highlighting the potential applications and versatility of these functionalised particles.

Liposome-Hydrogel Composites for Controlled Drug Delivery Applications

Various controlled delivery systems (CDSs) have been developed to overcome the shortcomings of traditional drug formulations (tablets, capsules, syrups, ointments, etc.). Among innovative CDSs, hydrogels and liposomes have shown great promise for clinical applications thanks to their cost-effectiveness, well-known chemistry and synthetic feasibility, biodegradability, biocompatibility and responsiveness to external stimuli. To date, several liposomal- and hydrogel-based products have been approved to treat cancer, as well as fungal and viral infections, hence the integration of liposomes into hydrogels has attracted increasing attention because of the benefit from both of them into a single platform, resulting in a multifunctional drug formulation, which is essential to develop efficient CDSs. This short review aims to present an updated report on the advancements of liposome-hydrogel systems for drug delivery purposes.

Concentration of Diynoic Acids in Bicellar Mixtures Derived from Those Phase Separation

Bicellar mixtures containing diacetylene molecules, such as diynoic acids, can be used as parent materials for functional membranes. A bicellar mixture consisting of a diynoic acid-10,12-tricosadiynoic acid (TCDA)-, a phospholipid-1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-, and a detergent-3-[(3-cholamidopropyl) dimethylammonio]-2-hydroxypropanesulfonate (CHAPSO)-was evaluated for its morphology and packing of TCDA molecules in its bicellar mixture. A TCDA/DMPC vesicle was prepared at different molar ratios, TCDA/DMPC = 2/8, 5/5, and 8/2; a TCDA/DMPC/CHAPSO bicellar mixture was prepared by mixing a CHAPSO solution with a TCDA/DMPC vesicle solution as a detergent at different composition ratios, x TCDA/DMPC = [TCDA/DMPC]/([TCDA/DMPC]+[CHAPSO]), of 1.0, 0.70, 0.50, and 0.30. A DMPC molecule formed a bilayer membrane structure and was used to suppress its precipitation. The packing density of the TCDA/DMPC/CHAPSO bicellar mixtures was increased by mixing a CHAPSO molecule in x TCDA/DMPC = 1.0 to 0.70 or 0.50. A TEM image of a TCDA/DMPC/CHAPSO bicellar mixture showed many discoidal assemblies at x TCDA/DMPC = 0.5 of TCDA/DMPC = 5/5. Polymerization of the TCDA molecules in the bicellar mixture by UV light suggested an ordered arrangement of TCDA. Polymerization at x TCDA/DMPC = 0.70 and 0.50 correlated with improved packing density.

Portable Colorimetric Hydrogel Beads for Point-of-Care Antimicrobial Susceptibility Testing

Sepsis is a life-threatening condition with systemic inflammatory responses caused by bacterial infections. Considering the emergence of antibiotic-resistant bacteria such as methicillin-resistant Staphylococcus aureus (MRSA), sepsis is a great threat to public health. The gold standard methods for antimicrobial susceptibility testing (AST), however, take at least approximately 3 days to implement the entire blood culture, pure culture, and AST processes. To overcome the time-consuming nature of conventional AST, a method employing a chromatic biosensor composed of poly(diacetylene), alginate, and LB broth (PAL) is introduced in this study. Compared to the gold standards, AST with PAL biosensors can be completed within a time frame as short as 16 h. Such a significant reduction in time is possible because the consecutive cultures and AST are carried out simultaneously by encapsulating the bacterial nutrients and detection molecules into a single component. The bead-like hydrogel sensors were used in their freeze-dried form, which endows them with portability and stability, thus making them adequate for point-of-care testing. The PAL biosensor yields minimum inhibitory concentrations comparable to those from the Clinical and Laboratory Standards Institute, and the applicability of the biosensor is further shown in MRSA-infected mice.

Polydiacetylene-based colorimetric and fluorometric sensors for lead ion recognition

Development of novel sensors for the detection of lead ions (Pb2+) has attracted increasing interest due to their inherent toxic effects on human health and the environment. In this study, we describe two new polydiacetylene (PDA)-based liposome sensors for the colorimetric and fluorometric recognition of Pb2+ in aqueous solution. In the sensor system, a thymine-1-acetic acid (TAA) or orotic acid (OA) group was reasonably introduced into the diacetylene monomer to work as a strong binding site for Pb2+. The TAA- or OA-functionalized monomer and 10,12-pentacosadiynoic acid (PCDA) were incorporated into PDA liposomes in aqueous solution. After UV light-induced polymerization, deep blue colored liposome solutions were obtained. Upon the addition of a series of transition metal cations into the liposome solutions, only Pb2+ could induce a color change from blue to red observable by the naked eye and a large fluorescence enhancement. The results clearly showed that the PDA-EDEA-TAA and PDA-EDEA-OA liposomes could act as highly selective and sensitive probes to detect Pb2+ in aqueous solution. The detection limits of PDA-EDEA-TAA and PDA-EDEA-OA systems are 38 nM and 25 nM, respectively. The excellent selectivity of PDA liposomes could be attributed to the stronger complexation behavior of Pb2+ with TAA (or OA) and the carboxylic acid at the lipid-solution interface which could perturb the PDA conjugated backbone. In addition, the proposed sensors were successfully applied to detect trace amounts of Pb2+ in real water samples with excellent recovery, indicating that the developed method had a good accuracy and precision for the analysis of trace Pb2+ in practical samples.

Potential use of Janus structures in food applications

Janus surfaces present technological opportunities both for research and industry in which different chemical, physical and/or structural components need to coexist for a single purpose such as chemistry, textile and material science. Varying inorganic and organic (polymer-based) materials are conventionally used however, utilizing nature-derived polymers to fabricate Janus structures is a recent and attractive trend which makes them more applicable for bio-based treatments with environmental concerns. Particularly, promising applications of Janus structures as being surfactants, drug delivery and micro/nano encapsulation vehicles for biomedical purposes successfully forward the interest on Janus concept to the food related practices. Producing Janus structures from nature-derived and food grade polymers such as alginate, cellulose, chitosan, lipid nanocrystals, zein and some plant-proteins and their usage stronger emulsions with higher stabilities, biosensing or antimicrobial practices as well as bioactive delivery and release control might be considered as a new era for food processing industry.

Lipase-catalyzed one-step regioselective synthesis of 1,2-dioctanoylgalloylglycerol in a solvent-free system: Optimization of reaction conditions and structural elucidation

A multi-functional galloylated structured lipid, 1,2-dioctanoylgalloylglycerol (DOGG), was synthesized enzymatically via a regioselective transesterification of propyl gallate and trioctanoate using an immobilized food-grade Candida antarctica lipase B (Lipozyme® 435) as the biocatalyst under solvent-free condition. The variables that affect the reaction, including reaction temperature, substrate ratio, reaction time, and enzyme load, were evaluated and optimized using Taguchi method and response surface methodology. Both methods predicted the same optimal reaction condition, resulting in a 68.8 ± 1.3% DOGG yield with reaction selectivity of 82.9 ± 0.6% at 90 °C, 25/1 trioctanoate/PG (mol/mol), 72 h reaction, and 25% enzyme load relative to the total substrate weight. The structure of the reaction product was elucidated using NMR spectroscopy and ESI-HRMS, confirming the regioselectivity of the reaction. Enzyme retained 50% of its activity after 5 cycles of reuse. It is feasible to synthesize DOGG as a potential antioxidant and nutraceutical using Lipozyme® 435.

"Smart" Delivery of Monoclonal Antibodies from a Magnetic Responsive Microgel Nanocomposite

"Smart" drug-delivery systems have significant potential to increase therapeutic efficiency, avoid undesired immune responses, and minimize drug side effects. Herein, we report on an innovative strategy to control the drug release process using two magneto-activated materials operating in the system. One of them, a polyvinyl alcohol (PVA)-diboronate (DB)-interpenetrated (IPN) alginate (Alg) microgel nanocomposite (PVA-DB-IPN-Alg) loaded with magnetic nanoparticles (MNPs), is acting as a drug-delivery system. The drugs or model (bio)molecules are loaded in the PVA-DB-IPN-Alg and then released upon receiving a magnetic signal. Another component of the system is represented with the MNPs functionalized with the glucose oxidase (GOx) enzyme, GOx-MNPs. The immobilized GOx biocatalytically produces H₂O₂ in the presence of glucose and oxygen, while the PVA-DB-IPN-Alg is decomposed/dissolved by reacting with H₂O₂. In the absence of a magnet, the biocatalytically produced H₂O₂ was mostly decomposed by the catalase enzyme present in the solution, thus not reaching the alginate microgel. Upon aggregation of these two types of particles induced by a magnet, the GOx-MNPs produced H₂O₂ in situ increasing locally its concentration, degrading the PVA-DB-IPN, thus opening pores in the alginate hydrogel resulting in a faster release of the entrapped payload. The release of the payload was confirmed in physiological complex environments, exemplified with human serum, demonstrating the stability and functionality of the materials in biological fluids. The release rate was strongly dependent on the concentration of catalase but not dependent on glucose concentration. The magneto-induced release process was confirmed for the small model protein payload, such as bovine serum albumin (BSA), as well as the trastuzumab monoclonal antibody (TmAb). For the latter, the release rate was up to 3.3 times higher in the presence of the magnet than in the absence of it in the human serum. We expect that the drug-delivery concept developed by these materials can find useful applications in the emerging field of "smart" materials in immunotherapy.

Alginate-Based Smart Materials and Their Application: Recent Advances and Perspectives

Nature produces materials using available molecular building blocks following a bottom-up approach. These materials are formed with great precision and flexibility in a controlled manner. This approach offers the inspiration for manufacturing new artificial materials and devices. Synthetic artificial materials can find many important applications ranging from personalized therapeutics to solutions for environmental problems. Among these materials, responsive synthetic materials are capable of changing their structure and/or properties in response to external stimuli, and hence are termed "smart" materials. Herein, this review focuses on alginate-based smart materials and their stimuli-responsive preparation, fragmentation, and applications in diverse fields from drug delivery and tissue engineering to water purification and environmental remediation. In the first part of this report, we review stimuli-induced preparation of alginate-based materials. Stimuli-triggered decomposition of alginate materials in a controlled fashion is documented in the second part, followed by the application of smart alginate materials in diverse fields. Because of their biocompatibility, easy accessibility, and simple techniques of material formation, alginates can provide solutions for several present and future problems of humankind. However, new research is needed for novel alginate-based materials with new functionalities and well-defined properties for targeted applications.

Polydiacetylene Liposome Microarray toward Facile Measurement of Platelet Activation in Whole Blood

The necessity of a simple measurement of platelet activation has been increasing in clinical medicine to regulate the proper dose of the antiplatelet drugs for patients having clinical outcomes in acute situations such as angina pectoris, stroke, or peripheral vascular disease or procedures involving angioplasty or coronary thrombolysis. We developed a self-signaling polydiacetylene (PDA) liposome microarray to detect activated platelets from whole blood samples in a single step. A specific antibody, 9F9 antibody, to platelet-bound fibrinogen was selected and conjugated to the PDA liposome microarray to quantify the fibrinogen-bound platelets. The developed PDA liposome-9F9 microarray generated an intense fluorescence signal when activated platelets in whole blood were introduced and also successfully distinguished the reduced platelet activation in the presence of Tirofiban, a model antiplatelet drug. The results of this single-step benchtop assay incorporates simple, sensitive, and rapid attributes that can detect the extent of platelet activation prior to needed clinical procedures.

Review on the advancements of magnetic gels: towards multifunctional magnetic liposome-hydrogel composites for biomedical applications

Magnetic gels have been gaining great attention in nanomedicine, as they combine features of hydrogels and magnetic nanoparticles into a single system. The incorporation of liposomes in magnetic gels further leads to a more robust multifunctional system enabling more functions and spatiotemporal control required for biomedical applications, which includes on-demand drug release. In this review, magnetic gels components are initially introduced, as well as an overview of advancements on the development, tuneability, manipulation and application of these materials. After a discussion of the advantages of combining hydrogels with liposomes, the properties, fabrication strategies and applications of magnetic liposome-hydrogel composites (magnetic lipogels or magnetolipogels) are reviewed. Overall, the progress of magnetic gels towards smart multifunctional materials are emphasized, considering the contributions for future developments.

Solvent-free enzymatic synthesis of 1,2-dipalmitoylgalloylglycerol: Characterization and optimization of reaction condition

A novel diacylglycerol-based galloyl structured lipid, 1,2-dipalmitoylgalloylglycerol (DPGG), was synthesized using the enzymatic transesterification of propyl gallate (PG) and tripalmitin under solvent-free condition. An immobilized and commercially available food-grade Candida antarctica lipase B, Lipozyme® 435, was used as the biocatalyst. The reaction variables that affect the yield of DPGG were optimized using a 3³ full factorial design. At 70 °C, DPGG was obtained at a yield of 33.0 ± 2.0% with PG conversion at 44.8 ± 1.8% when the following condition was used: 25 substrate molar ratio of tripalmitin to PG, 120 h reaction time, and 25% enzyme load relative to the total substrate weight. The structure of reaction product was elucidated using Fourier-transform infrared spectroscopy (FT-IR), electrospray ionization high-resolution accurate-mass tandem mass spectrometry (ESI-HRAM-MS/MS), and 1D and 2D nuclear magnetic resonance spectroscopy (NMR). The effects of different lipases and galloyl donors/acceptors on the transesterification were also investigated.

Janus particles: from concepts to environmentally friendly materials and sustainable applications

Janus particles represent a unique group of patchy particles combining two or more different physical or chemical functionalities at their opposite sides. Especially, individual Janus particles (JPs) with both chemical and geometrical anisotropy as well as their assembled layers provide considerable advantages over the conventional monofunctional particles or surfactant molecules offering (a) a high surface-to-volume ratio; (b) high interfacial activity; (c) target controlling and manipulation of their interfacial activity by external signals such as temperature, light, pH, or ionic strength and achieving switching between stable emulsions and macro-phase separation; (d) recovery and recycling; (e) controlling the mass transport across the interface between the two phases; and finally (f) tunable several functionalities in one particle allowing their use either as carrier materials for immobilized catalytically active substances or, alternatively, their site-selective attachment to substrates keeping another functionality active for further reactions. All these advantages of JPs make them exclusive materials for application in (bio-)catalysis and (bio-)sensing. Considering “green chemistry” aspects covering biogenic materials based on either natural or fully synthetic biocompatible and biodegradable polymers for the design of JPs may solve the problem of toxicity of some existing materials and open new paths for the development of more environmentally friendly and sustainable materials in the very near future. Considering the number of contributions published each year on the topic of Janus particles in general, the number of contributions regarding their environmentally friendly and sustainable applications is by far smaller. This certainly pinpoints an important challenge and is addressed in this review article. The first part of the review focuses on the synthesis of sustainable biogenic or biocompatible Janus particles, as well as strategies for their recovery, recycling, and reusability. The second part addresses recent advances in applications of biogenic/biocompatible and non-biocompatible JPs in environmental and biotechnological fields such as sensing of hazardous pollutants, water decontamination, and hydrogen production. Finally, we provide implications for the rational design of environmentally friendly and sustainable materials based on Janus particles.

Tuning chromatic response, sensitivity, and specificity of polydiacetylene-based sensors

In this review, we provide an overview of six major techniques to tune the sensitivity and specificity of polydiacetylene-based sensors.

Formation of Polarized, Functional Artificial Cells from Compartmentalized Droplet Networks and Nanomaterials, Using One-Step, Dual-Material 3D-Printed Microfluidics

The bottom-up construction of synthetic cells with user-defined chemical organization holds considerable promise in the creation of bioinspired materials. Complex emulsions, droplet networks, and nested vesicles all represent platforms for the engineering of segregated chemistries with controlled communication, analogous to biological cells. Microfluidic manufacture of such droplet-based materials typically results in radial or axisymmetric structures. In contrast, biological cells frequently display chemical polarity or gradients, which enable the determination of directionality, and inform higher-order interactions. Here, a dual-material, 3D-printing methodology to produce microfluidic architectures that enable the construction of functional, asymmetric, hierarchical, emulsion-based artificial cellular chassis is developed. These materials incorporate droplet networks, lipid membranes, and nanoparticle components. Microfluidic 3D-channel arrangements enable symmetry-breaking and the spatial patterning of droplet hierarchies. This approach can produce internal gradients and hemispherically patterned, multilayered shells alongside chemical compartmentalization. Such organization enables incorporation of organic and inorganic components, including lipid bilayers, within the same entity. In this way, functional polarization, that imparts individual and collective directionality on the resulting artificial cells, is demonstrated. This approach enables exploitation of polarity and asymmetry, in conjunction with compartmentalized and networked chemistry, in single and higher-order organized structures, thereby increasing the palette of functionality in artificial cellular materials.

Gas-Shearing Fabrication of Multicompartmental Microspheres: A One-Step and Oil-Free Approach

Multicompartmental microparticles (MCMs) have attracted considerable attention in biomedical engineering and materials sciences, as they can carry multiple materials in the separated phases of a single particle. However, the robust fabrication of monodisperse, highly compartmental MCMs at the micro- and nanoscales remains challenging. Here, a simple one-step and oil-free process, based on the gas-flow-assisted formation of microdroplets ("gas-shearing"), is established for the scalable production of monodisperse MCMs. By changing the configuration of the needle system and gas flow in the spray ejector device, the oil-free gas-shearing process easily allows the design of microparticles consisting of two, four, six, and even eight compartments with a precise control over the properties of each compartment. As oils and surfactants are not used, the gas-shearing method is highly cytocompatible. The versatile applications of such MCMs are demonstrated by producing a magnetic microrobot and a biocompatible carrier for the coculturing of cells. This research suggests that the oil-free gas-shearing strategy is a reliable, scalable, and biofriendly process for producing MCMs that may become attractive materials for biomedical applications.

Multi-stimuli-responsiveness of a novel polydiacetylene-based supramolecular gel

Herein, a novel supramolecular gel was fabricated through the bi-component co-assembly strategy of commercially available 10,12-pentacosadiynoic acid (PCDA) and laboratory-synthesized amphiphilic co-gelator N-(2-(1H-imidazol-4-yl)ethyl)stearamide (IMSA), which contains one imidazole head group and a long alkyl chain tail, by synergetic noncovalent interactions. Upon irradiation of normal 254 nm UV light, blue polydiacetylene (PDA) could be obtained by topo-polymerization of the PCDA monomers in the gel phase. This PDA-based supramolecular gel is able to respond to various environmental stimuli and shows a blue-to-red chromatic transition, which could be observed by the naked eye. Specifically, upon exposure to heat, pH, metal cation and organic solvent stimuli, the PDA gel displays thermochromism, halochromism, ionochromism and solvatochromism, respectively. More interestingly, the differences of the above-mentioned stimuli-induced color transition of the blue PDA supramolecular gels could be characterized by UV-Vis absorption spectra and Raman spectra, therefore illuminating a bright application prospect in the area of chemosensing.

Electromagnetic manipulation enabled calcium alginate Janus microsphere for targeted delivery of mesenchymal stem cells

We prepared Janus microspheres based on sodium alginate for the encapsulation of mesenchymal stem cells (MSC) in one compartment and iron oxide nanoparticles (IONP) or a drug in the second compartment. 4% percent sodium alginate solution was allowed to pass through a septum-theta capillary device and react with 2.5% calcium chloride to allow crosslinking to occur in the solution, forming calcium alginate Janus microspheres. Physico-chemical characterization of microspheres was done by FTIR, TGA, and XRD after loading of stem cells and IONP/drug. The mechanical integrity of microspheres was tested at different time points, which showed that 4% alginate microspheres were mechanically stable for a long period of time. Live/dead staining of MSCs alone and the MTS assay of MSCs and DMSO co-loaded were performed, which showed less toxicity to MSC in the Janus configuration. IONP/MSC-loaded Janus microspheres were tested by magnetic manipulation for targeted MSC delivery for cartilage repair using an electromagnetic manipulation (EMM) device. Janus microspheres can be used for targeted stem cell/drug delivery using EMM for cartilage repair in the near future.

Design of a simple paper-based colorimetric biosensor using polydiacetylene liposomes for neomycin detection

A paper-based analytical device (μPAD) combined with self-signaling polydiacetylene liposomes was developed for convenient visual neomycin detection.

Mussel-Inspired Universal Bioconjugation of Polydiacetylene Liposome for Droplet-Array Biosensors

Most solid-state biosensor platforms require a specific immobilization chemistry and a bioconjugation strategy separately to tether sensory molecules to a substrate and attach specific receptors to the sensory unit, respectively. We developed a mussel-inspired universal conjugation method that enables both surface immobilization and bioconjugation at the same time. By incorporating dopamine or catechol moiety into self-signaling polydiacetylene (PDA) liposomes, we demonstrated efficient immobilization of the PDA liposomes to a wide range of substrates, without any substrate modification. Moreover, receptor molecules having a specificity toward a target molecule can also be attached to the immobilized PDA liposome layer without any chemical modification. We applied our mussel-inspired conjugation method to a droplet-array biosensor by exploiting the hydrophilic nature of PDA liposomes coated on a hydrophobic polytetrafluoroethylene surface and demonstrated selective and sensitive detection of vascular endothelial growth factor down to 10 nM.

Advances in polydiacetylene development for the design of side chain groups in smart material applications – a mini review

This review focuses on various side chain groups based on PDAs published over the last 3 years, covering urea, melamine, ferriferous oxide and coumarin. Perspectives on the remaining challenges and future developments are also proposed.

Recent progress in stimuli-induced polydiacetylenes for sensing temperature, chemical and biological targets

Polydiacetylenes (PDAs) have received increasing attention as smart materials owing to their unique properties. Upon addition of various stimuli, blue PDAs can undergo a colorimetric transition from blue to red along with a change from non-fluorescent to fluorescent. The optical changes can be readily detected by the naked eye and by using absorption and fluorescence spectrometers. These properties make PDAs excellent materials for use in platforms for sensing chemical or biological targets. In recent years, a number of biosensors and chemosensors based on the optical responses of polydiacetylenes have been reported. In this review, recent advances made in this area were discussed following a format based on different cognizing targets, including temperature, metal ions, anions, surfactants, amines, water, gas, sugars, hydrocarbons, neomycin, heparin, virus, enzymes, bacteria, and cancers. Emphasis is given to the methods used to prepare PDA sensing systems as well as their sensing performance.

A Magnetically Responsive Polydiacetylene Precursor for Latent Fingerprint Analysis

A magnetically responsive diacetylene (DA) powder was developed for the visualization of latent fingerprints. A mixture of the DA and magnetite nanoparticles, applied to a surface containing latent fingermarks, becomes immobilized along the ridge patterns of the fingerprints when a magnetic field is applied. Alignment along the ridge structures is a consequence of favorable hydrophobic interactions occurring between the long alkyl chains in the DAs and the lipid-rich, sebaceous latent fingermarks. UV irradiation of the DA-magnetite composite immobilized on the latent fingerprint results in the generation of blue-colored PDAs. Heat treatment of the blue-colored image promotes a blue-to-red transition as well as fluorescence turn-on. A combination of the aligned pale brown-colored monomeric state, UV irradiation generated blue-colored PDA state, as well as the heat treatment generated red-colored and fluorescent PDA state enables efficient visual imaging of a latent fingerprint, which is deposited on various colored solid surfaces.

Biodegradable liposome-encapsulated hydrogels for biomedical applications: a marriage of convenience

Liposome-encapsulated hydrogels have emerged as an attractive strategy for medical and pharmaceutical applications.

Fabrication of shape controllable Janus alginate/pNIPAAm microgels via microfluidics technique and off-chip ionic cross-linking

A novel method to fabricate shape controllable alginate/pNIPAAm complex microgels is reported. Monodisperse alginate/pNIPAAm droplets are created via microfluidics and cross-linked in different concentrations of hot glycerol/barium acetate water solutions. By changing the initial droplet size and glycerol concentration of the collecting solution, the resultant microgel shape and surface details can be systematically tuned. High-speed imaging is used to visualize and explain the microgel formation process.

A polymerizable supramolecular approach for the fabrication of patterned magnetic nanoparticles

A straightforward method for the preparation of patterned magnetite nanoparticles (MNPs) was developed. The polymerizable supramolecular approach afforded finely patterned MNPs on a solid substrate after a sequential UV-irradiation-wet etching-calcination process with an MNP-embedded diacetylene film.