Branch density-controlled synthesis of hierarchical TiO2 nanobelt and tunable three-step electron transfer for enhanced photocatalytic property

Influence of Anatase-Rutile Ratio on Band Edge Position and Defect States of TiO2 Homojunction Catalyst

Removal of toxic air and water dissociation in the environment has become a major challenging issue throughout the world. Mixed phase rutile-anatase titanium dioxide catalysts are very effective in photocatalysis and have been studied extensively. However, the mechanism causing this effect and band alignment of the two phases are not fully understood. Pointing to the issue, we have designed one-dimensional mixed-phase TiO₂ and introduced defects near the valence band. Experimental results showed that band alignment between two phases, up-shift of the band edge, and optimum anatase percentage play a key role in the enhancement of the photocatalytic activity. We predicted shifts in band edge originating from surface electric dipole layer induced by defects.

Inorganic-organic nanofiber networks with antibacteria properties for enhanced particulate filtration: The critical role of amorphous titania

The demand for air filter media at indoor and outdoor is increasing tremendously due to air pollution and especially for problems related to airborne particulate matter (PM). To realize that, here a class nanofiber air filter media with strong antibacterial activity, hydrophobic nature, high filtration efficiency with low pressure drop is prepared. Novel organic-inorganic nanocomposite nanofibers used in this work benefited for the multifunctional performance. Amorphous titanium dioxide (mTiO₂) is utilized for air filtration application which exhibits excellent enhancement of PM_2.5 filtration properties and antibacterial activity. The unique Poly (vinylpyrrolidone) (PVP)-mTiO₂ nanofiber air filter media acquired hydrophobic nature with a large increase in water contact angle of 127° from 36°. The resulting free-standing nanofiber filters exhibit high PM_2.5 filtration efficiency of >99.9% and low pressure drop of 39 Pa. Antibacterial activity of nanofibrous membrane has been rationally engineered by titanium oxide as the barrier to bacterial ingression. A long term of 160 h filtration test has proved PVP-mTiO₂ nanofibers air filter media holds outstanding 99% filtration efficiency for PM_2.5. This work takes forward a significant lead in design and production of high performance and very low pressure drop air filter media with a wide range of functional properties.

One-pot synthesis of Fe2O3/Y2O3@TNS for enhanced photocatalytic and adsorption properties

TiO₂-based nanosheets (TNS) modified with Fe₂O₃ and Y₂O₃ particles (Fe₂O₃/Y₂O₃@TNS), possessing a laminar structure with large specific surface area of 382 m² g⁻¹, were synthesized via a one-pot hydrothermal method.

TiO2 Nanosheet Arrays with Layered SnS2 and CoOx Nanoparticles for Efficient Photoelectrochemical Water Splitting

Converting solar energy into sustainable hydrogen fuel by photoelectrochemical (PEC) water splitting is a promising technology to solve increasingly serious global energy supply and environmental issues. However, the PEC performance based on TiO2 nanomaterials is hindered by the limited sunlight-harvesting ability and its high recombination rate of photogenerated charge carriers. In this work, layered SnS2 absorbers and CoOx nanoparticles decorated two-dimensional (2D) TiO2 nanosheet array photoelectrode have been rationally designed and successfully synthesized, which remarkably enhanced the PEC performance for water splitting. As the result, photoconversion efficiency of TiO2/SnS2/CoOx and TiO2/SnS2 hybrid photoanodes increases by 3.6 and 2.0 times under simulated sunlight illumination, compared with the bare TiO2 nanosheet arrays photoanode. Furthermore, the TiO2/SnS2/CoOx photoanode also presented higher PEC stability owing to CoOx catalyst served as efficient water oxidation catalyst as well as an effective protectant for preventing absorber photocorrosion.

Synergistic effect of band edge potentials on BiFeO3/V2O5 composite: Enhanced photo catalytic activity

The BiFeO₃/V₂O₅ has been successfully synthesized by simple annealing of BiFeO₃ nanoplates and V₂O₅ nanoflower. The phase, structural, optical properties and chemical state of the BiFeO₃, V₂O₅ and different composition of BiFeO₃/V₂O₅ samples were comparatively characterized by various spectroscopic and microscopic techniques. The prepared catalyst exhibits unique photo catalytic and post-oxidation/reduction ability for removal of various (MB, Phenol, CV, RhB) water organic pollutants. Compared to pure BiFeO₃ and V₂O₅, the different Wt % of BiFeO₃/V₂O₅ composition exhibited higher photo catalytic activity. The fortunate BiFeO₃/V₂O₅ interface hybrid photo catalyst makes a significant impact in the enhancement of photo catalytic reaction. This remarkable efficiency could be ascribed to the synergistic effect between the V₂O₅ petals and BiFeO₃ plates. The exceptional morphology, increased surface area, uniformity, less-agglomerated spreading could increase the ability of visible light response, which lead the improved electron transport ability and the higher charge separation. The enhanced rate of photo generated charge carriers separations were evinced by the EIS and PL spectrum measurements. The allowed radical trapping experiment divulge that the hole (h⁺), and super oxide radical (O₂-) are the minimized effect in degradation, on the other hand hydroxyl radical (OH) is plays the foremost role and act as the active radicals in the catalytic organism. In relations of above investigation, a probable photo degradation mechanism of the as-synthesized photo catalyst is carefully explicated. This effort delivers an effective approach to design and fabricate the efficient photo catalyst through integrating of materials, which has a potential for industrial waste water purification.

Synthesis and applications of nano-TiO2: a review

TiO₂-based nanomaterials have attracted prodigious attention as a photocatalysts in numerous fields of applications. In this thematic issue, the mechanism behind the photocatalytic activity of nano-TiO₂ as well as the critical properties have been reviewed in details. The synthesis routes and the variables that affect the size and crystallinity of nano-TiO₂ have also been discussed in detail. Moreover, a newly emerged class of color TiO₂, TiO₂ in aerogel form, nanotubes form, doped and undoped form, and other forms of TiO₂ have been discussed in details. Photocatalytic and photovoltaic applications and the type of nano-TiO₂ that is more suitable for these applications have been discussed in this review.

Fabrication of mixed phase TiO2 heterojunction nanorods and their enhanced photoactivities

Substantial efforts have been made in recent times in solving the major limiting factors affecting the efficiency of a photocatalyst. The fabrication of efficient junction architectures is one of the viable approaches to resolve this setback. We have developed a facile and systematic approach for the synthesis of anatase TiO2 () nanoparticles and 1-D anatase and rutile TiO2 () heterojunction nanorods to enhance the interfacial contact area by adjusting the titanium(iv) butoxide (TBOT) to titanium chloride (TiCl4) volume ratio. Their narrower band gap, increasing surface area and anatase phase composition engineered by adjusting the relative concentrations of titanium butoxide (TBOT) and titanium chloride (TiCl4) (TBOT/TiCl4, 1 : 0, 1 : 0.25, 1 : 1 and 1 : 4 v/v for , , and respectively) are also addressed. The materials showed impressive photocatalytic activity for H2 evolution from water/methanol and the photodegradation of organic pollutants like rhodamine B (RhB) and methylene blue (MB) dyes. showed superior activity (16.4 mmol g(-1) h(-1)) with an apparent quantum efficiency (AQE) of 7.7% together with its long-term stability. This is attributed to the synergistic effect observed in the mixed phase nanorod heterojunction photocatalyst. Methyl viologen (MV(2+)) has been used as a probe to elucidate the photocatalytic activities and highlight the heterojunction driven separation of photo-excited charge carriers for enhanced hydrogen production.

Graphene-Anchored p-Type CuBO2 Nanocrystals for a Transparent Cold Cathode

CuBO₂ nanostructures were synthesized by employing a low-cost hydrothermal technique to combine into the CuBO₂-RGO nanocomposite for the first time using chemically prepared graphene sheets. The nanohybrid samples were characterized for structural information using X-ray diffraction (XRD) that revealed the proper crystalline phase formation of CuBO₂ unaltered by composite formation with graphene. Raman spectroscopic studies were employed to confirm the presence of graphene. A morphological study with field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) suggested the proper wrapping of RGO sheets over CuBO₂ nanocubes. Moreover, the close proximity of lattice planes of CuBO₂ and RGO to each other was observed in high-resolution TEM studies that were correlated with the Raman spectroscopic studies. Finally, the samples were characterized to study the field emission (FE) properties of the same using a laboratory-made high-vacuum field-emission setup. Finite-element-based theoretical simulation studies were carried out to explain and compare the field emission properties with the experimental results. The FE properties of the composite samples were found to be tuned by the nature of wrapping the RGO sheets over the CuBO₂ nanocubes, which was typically dependent upon the spiky morphology of the nanocubes.

Anchoring Tailored Low-Index Faceted BiOBr Nanoplates onto TiO2 Nanorods to Enhance the Stability and Visible-Light-Driven Catalytic Activity

In this work, a fantastic one-dimensional (1D) BiOBr/TiO₂ nanorod (NR) heterojunction composite was rationally proposed and designed from the perspective of molecular and interface engineering. The fabricated intimately connected interfacial heterojunction between two-dimensional BiOBr nanoplates and 1D TiO₂ NRs acts as an interfacial nanochannel to promote efficient interfacial charge migration and separation of photogenerated electron-hole pairs. As a result, 1D BiOBr/TiO₂ NR heterojunctions exhibited outstanding visible-light photocatalytic activities and sustained cycling performance. Under visible-light irradiation for 120 min, the reduction efficiency of Cr(VI) over the TB-2 sample (molar ratio: n(Ti)/n(Bi) = 2:1) is as high as 95.4% without adding any scavengers. Furthermore, the sample also shows excellent photodegradation activity of RhB with a much higher apparent rate constant of 0.49 min^-1 and 88.5% total organic carbon removal ratio. Furthermore, the corresponding mechanism of enhanced photocatalytic activity is proposed according to comprehensively investigated results from photoluminescence spectroscopy, photoelectrochemical measurement analysis, and radical trapping experiments. This study provides an attractive avenue to design and fabricate highly efficient 1D NR heterojunction photocatalysts, which possessed a high application value in the field of environmental remediation, especially for wastewater purification.

Band edge tuned ZnxCd1−xS solid solution nanopowders for efficient solar photocatalysis

Natural sunlight assisted catalytic activity of hydrothermally synthesized zinc blende Zn_xCd_1−xS solid solution with theoretical insights.

Three way electron transfer of a C–N–S tri doped two-phase junction of TiO2nanoparticles for efficient visible light photocatalytic dye degradation

C–N–S tridoped TiO₂nanoparticles were synthesized by a sol–gel method using thiourea as a compound source of carbon (C), nitrogen (N) and sulphur (S).

Structure, synthesis, and applications of TiO2 nanobelts

TiO2 semiconductor nanobelts have unique structural and functional properties, which lead to great potential in many fields, including photovoltaics, photocatalysis, energy storage, gas sensors, biosensors, and even biomaterials. A review of synthetic methods, properties, surface modification, and applications of TiO2 nanobelts is presented here. The structural features and basic properties of TiO2 nanobelts are systematically discussed, with the many applications of TiO2 nanobelts in the fields of photocatalysis, solar cells, gas sensors, biosensors, and lithium-ion batteries then introduced. Research efforts that aim to overcome the intrinsic drawbacks of TiO2 nanobelts are also highlighted. These efforts are focused on the rational design and modification of TiO2 nanobelts by doping with heteroatoms and/or forming surface heterostructures, to improve their desirable properties. Subsequently, the various types of surface heterostructures obtained by coupling TiO2 nanobelts with metal and metal oxide nanoparticles, chalcogenides, and conducting polymers are described. Further, the charge separation and electron transfer at the interfaces of these heterostructures are also discussed. These properties are related to improved sensitivity and selectivity for specific gases and biomolecules, as well as enhanced UV and visible light photocatalytic properties. The progress in developments of near-infrared-active photocatalysts based on TiO2 nanobelts is also highlighted. Finally, an outline of important directions of future research into the synthesis, modification, and applications of this unique material is given.

Structural design of TiO2-based photocatalyst for H2 production and degradation applications

This review aims to provide a comprehensive and contemporary overview, as well as a guide of the development of new generation TiO₂ based photocatalysts via structural design for improved solar energy conversion technologies.

Enhanced visible-light photocatalytic performance of electrospun carbon-doped TiO2/halloysite nanotube hybrid nanofibers

In this work, the effects of halloysite nanotubes (HNTs) on the visible-light photocatalytic ability of electrospun carbon doped TiO2/HNT (C-TH) nanofibers have been explored. Structural and morphological investigations demonstrate that incorporation of HNTs into anatase C-TH hybrid nanofibers was easily achieved by using sol-gel processing combined with electrospinning approach, thus HNTs could be uniformly embedded in the electrospun nanofibers. The visible-light photocatalytic efficiency of C-TH hybrid on the degradation of methyl blue (MB) was greatly enhanced with the combination of moderate amount of HNTs (8%), which was 23 times higher than that of commercial anatase TiO2. Mechanism of the enhancing effect of HNTs has been explored by analyzing the dual-effect of adsorption and photocatalysis in various amounts of HNTs incorporated C-TiO2 nanofibers. With nanotubular structure and considerable adsorption ability, incorporated HNTs functioned as porogen agent in C-TH nanofibers. This simple incorporation approach increases the specific surface areas of nanofibers, which improves the mass transport of reactant into the nanofibers and the adsorption of visible-light by scattering, meanwhile may suppress the charge recombination and enhance photoinduced charge separation, thus efficiently enhancing visible-light photocatalytic performance of the C-TH hybrid nanofibers.