Interconnected network of MnO2 nanowires with a "cocoonlike" morphology: redox couple-mediated performance enhancement in symmetric aqueous supercapacitor

Conductive Polymer-Based Electrodes and Supercapacitors: Materials, Electrolytes, and Characterizations

New materials and the interactions between them are the basis of novel energy storage devices such as supercapacitors and batteries. In recent years, because of the increasing demand for electricity as an energy source, the development of new energy storage materials is among the most actively studied topics. Conductive polymers (CPs), because of their intrinsic electrochemical activity and electrical conductivity, have also been intensively explored. While most of the high capacitance reported in the literature comes from hybrid materials, for example, conductive polymers composed of metal oxides and carbon materials, such as graphene and carbon nanotubes, new chemistry and the 3D structure of conductive polymers remain critical. This comprehensive review focuses on the basic properties of three popular conductive polymers and their composites with carbon materials and metal oxides that have been actively explored as energy storage materials, i.e., polypyrrole (PPy), polyaniline (PANi), and polythiophene (PTh), and various types of electrolytes, including aqueous, organic, quasi-solid, and self-healing electrolytes. Important experimental parameters affecting material property and morphology are also discussed. Electrochemical and analytical techniques frequently employed in material and supercapacitor research are presented. In particular, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are discussed in detail, including how to extract data from spectra to calculate key parameters. Pros and cons of CP-based supercapacitors are discussed together with their potential applications.

Locust Bean gum-based hydrogels embedded magnetic iron oxide nanoparticles nanocomposite: Advanced materials for environmental and energy applications

This paper reports a simple method of designing and synthesizing magnetic iron oxide (IO) integrated locust bean gum-cl-polyacrylonitrile hydrogel nanocomposites (LBG-cl-PAN/IONP) by in situ mineralization of iron ions in a hydrogel matrix. A two-step gel crosslink method followed by co-precipitation method was used to prepare these novel hydrogels embedded with magnetic iron oxide nanoparticles. The LBG-cl-PAN/IONP hydrogel nanocomposite (HNC) were tested in batch adsorption experiments for their ability to remove a cationic dyes, methylene blue (MB) & Methyl violet (MV), from aqueous solution. In order to analyze the LBG-cl-PAN/IONP HNC, FTIR, XRD, XPS, VSM, TEM, and EDX techniques were applied. Numerous operating parameters were studied, including the amount of adsorbent, the contact time, pH, temperature, the dye concentration, and the coexisting ion concentration. According to the Langmuir isotherm model, MB and MV had maximum monolayer adsorptive capacities of 1250 and 1111 mg/g, respectively. LBG-cl-PAN/IONP HNC controlled IONP oxidation as well as sustained adsorptive removal over a wide pH range (7-10). The key mechanism of adsorption consisted of electrostatic interaction and ion exchange. For successful use in successive cycles after regeneration using HNO₃ as eluent, the LBG-cl-PAN/IONP HNC can easily be reused. As a material, the LBG-cl-PAN/IONP HNC is a promising sorbent or composite material for removing toxic dyes from water, and therefore can be applied to enhance water and wastewater treatment technology. Additionally, we have briefly evaluated LBG-cl-PAN/IONP HNC for antibacterial and supercapacitor applications. According to our knowledge, this is the first report describing the use of LBG-cl-PAN/IONP HNC multifunctional efficacy as an excellent sorbent, antibacterial and electrochemical supercapacitor applications.

CoFe2O4 Hollow Spheres-Decorated Three-Dimensional rGO Sponge for Highly Efficient Electrochemical Charge Storage Devices

The energy demand, the crisis of fossil fuels, and the increasing popularity of portable and wearable electronics in the global market have triggered the demand to develop high-performance flexible all-solid-state supercapacitors that are capable of delivering high energy at high power density as well as being safely entrenched in those electronics. Herein, we have designed a nanocomposite, 80CFhs-20rGOsp, which exhibits a high specific capacitance (C S) value of 1032 F g-1 at 3 A g-1. Utilizing this nanocomposite as the cathode and reduced graphene oxide sponge (rGOsp) as the anode, a flexible all-solid-state asymmetric device has been fabricated. In this device, poly(vinyl alcohol) (PVA) gel embedded with a mixture of 3 M KOH and 0.1 M K4[Fe(CN)6] was used as an electrolyte cum separator. The fabricated device showed the capability to deliver an energy density of 65.8 W h kg-1 at a power density of 1500 W kg-1 and retained its capability even after various physical deformations. The device also exhibited a long cycle life and retained ∼96% of its C S value after 5000 cycles. Moreover, the fabricated flexible all-solid-state device successfully illuminated light-emitting diodes, which proved its potential use in real-life supercapacitor applications. The obtained results revealed the excellent electrochemical performances of the fabricated device and rendered it a promising candidate in the energy sector.

MnO2/DNAzyme-mediated ratiometric fluorescence assay of acetylcholinesterase

A ratiometric fluorescent probe (MnO2/DNAzyme) is constructed. In the presence of AChE, the product thiocholine reduces MnO2 to Mn2+. The released H1 strands hybridizes with H2 strands to activate DNAzyme and cause cleavage of DNA-F signal probe.

Dual-Purpose CuFe2O4-rGO-Based Nanocomposite for Asymmetric Flexible Supercapacitors and Catalytic Reduction of Nitroaromatic Derivatives

Energy storage and environmental pollution are two major global concerns in today's scenario. As a result of the momentous exhaustion of fossil fuels, the generation of energy from renewable sources is gaining immense importance. However, the irregular availability of energy from these renewable sources is the major encounter to achieve sustainable energy harvesting technology, yielding efficient but continuous and reliable energy supplies. Apart from the requirement of state-of-the-art heavy-duty technologies such as transportation, defense, etc., in the modern lifestyle to fulfill the demand for flexible electronic devices, the development of high-performance mechanically flexible all-solid-state supercapacitors is increasing massively. On the other hand, to cater to the need for accessibility of clean water for healthy lives, several technologies are evolving to treat wastewater and groundwater. Hence, the development of efficient catalysts for destroying water pollutants is an attractive approach. Considering these two crucial facets, in this paper, we have demonstrated the multifunctional features of a CuFe2O4-rGO nanocomposite, which was exploited to fabricate a high-performance mechanically flexible all-solid-state asymmetric supercapacitor and simultaneously used as an efficient but easily recoverable catalyst for the transformation of different nitroaromatic compounds. We have also demonstrated the conversion of trifluralin (a herbicide), which is present in the water body as a pollutant, to its corresponding amine derivatives, which can be utilized in the preparation of important pharmaceutical products.

A high-voltage quasi-solid-state flexible supercapacitor with a wide operational temperature range based on a low-cost "water-in-salt" hydrogel electrolyte

Recently, "water-in-salt" electrolytes have provided a huge boost to the realization of high energy density for water-based supercapacitors by broadening the electrochemical stability window. However, the high cost and low conductivity of high concentration LiTFSI greatly restrict the possibility of practical application. Herein, we adopt a new strategy to develop a low-cost and quasi-solid-state polyelectrolyte hydrogel accommodating a superhigh concentration of CH₃COOK through in situ polymerization, avoiding the problem that many conventional polymers cannot accommodate ultra-high ion concentration. The polyelectrolyte hydrogel with 24 M CH₃COOK exhibits a conductivity of up to 35.8 mS cm^-1 and a stretchability of 950%. With advanced N-doped graphene hydrogel electrodes, the assembled supercapacitor yields a voltage window of 2.1 V with an energy density of 33.0 W h kg^-1 and superior cyclability with 88.2% capacitance retention at 4 A g^-1 after 6000 cycles comparable to those supercapacitors using high-cost LiTFSI salts. Besides, the supercapacitor with excellent temperature stability in the range of -20 to 70 °C can light an LED for more than one minute. The assembled flexible device with the PAAK/CMC-24 M gel film sandwiched in between demonstrates excellent bendability from 0° to 180° and shows great potential for flexible/wearable electronic devices. Our feasible approach provides a new route for assembling quasi-solid-state flexible high-energy storage devices with "water-in-salt" electrolytes.

A novel self-supported structure of Ce-UiO-66/TNF in a redox electrolyte with high supercapacitive performance

A novel self-supported structure of Ce-UiO-66/TNF was firstly synthesized by growing Ce-UiO-66 on a TNF substrate. This novel Ce-UiO-66/TNF material was proved to possess a high supercapacitive performance in the redox electrolyte of Fe(CN)₆^3-/^4-, and it was also the first study for Ce-UiO-66 material on the supercapacitor application. High specific capacitances of 6.9 and 2.5 Fcm^-2 can be achieved at large current densities of 20 and 80 mAcm^-2, respectively. After 10,000 charge-discharge cycles, the capacitance retention can be kept at 95% and the coulomb efficiency can be maintained over 98%. Such outstanding electrochemical performance may be related to the redox property of the electrolyte, high specific surface area of the Ce-UiO-66 material, porous characteristic of the TNF substrate and self-supported structure of the whole electrode.

Snowflake-Like Dendritic CoNi Alloy-rGO Nanocomposite as a Cathode Electrode Material for an All-Solid-State Flexible Asymmetric High-Performance Supercapacitor Device

Flexible all-solid-state supercapacitors having high mechanical stability and foldable features are crucial to meet the growing demands for a large number of portable electronic devices such as wearable electronics, displays, touch screens, detectors, etc. Here, we report the fabrication of such a flexible all-solid-state asymmetric supercapacitor device by using a nanocomposite composed of a snowflake-like dendritic CoNi alloy and reduced graphene oxide ((CoNi_D)₆₀-rGO₄₀) as the positive electrode and pure rGO as the negative electrode for the first time. In this device, a polyvinyl alcohol (PVA) gel containing 3 M KOH and 0.1 M K₄[Fe(CN)₆] was used as the electrolyte cum separator. This supercapacitor device offers a high energy density value of 52.8 Wh kg^-1 at a power density of 2000 W kg^-1. The values of these two key performance parameters are superior to the many commercially available supercapacitors and reported values in the literature. In addition, this device also exhibits retention of ∼95% of its initial specific capacitance value after 4000 cycles at a current density of 2.5 A g^-1, displaying its high cycling stability. This supercapacitor is so flexible that no mechanical deformation occurs even after bending at different angles and folding up to 180°, and its specific capacitance value practically remains unaffected when the device was twisted at different bending angles. This flexible all-solid-state asymmetric supercapacitor device can power a light-emitting diode (LED) and demonstrates its promise to meet the practical applications in energy storage technology.

Mesoporous MnO2/SBA-15 as a synergetic adsorbent for enhanced uranium adsorption

Mesoporous MnO₂/SBA-15 composites were prepared via a simple route and were explored as a synergetic adsorbent for adsorption of U(vi).

MnO2 flowery nanocomposites for efficient and fast removal of mercury(ii) from aqueous solution: a facile strategy and mechanistic interpretation

MnO2 flowery nanocomposites were explored as a novel and cost effective nanoadsorbent for the fast and efficient extraction of toxic inorganic contaminants from aqueous solution.

Redox-Mediator-Enhanced Electrochemical Capacitors: Recent Advances and Future Perspectives

Supercapacitors deliver exceptional power densities, high cycling stability, and inherent safety but suffer from low energy densities. Many methods to enhance the energy density are based on exploring electrode materials with well-developed structures and designing asymmetric systems with wide voltage windows. The energy density is substantially enhanced at the compromise of power density by utilizing the sluggish kinetics of pseudocapacitive materials. Redox-active electrolytes can contribute additional pseudocapacitance from the reactions of redox mediators at the interface, which have attracted increasing attention of researchers. Redox-mediator-enhanced supercapacitors deliver high energy densities while retaining high power densities. This Minireview highlights the recently prominent progresses of single-, dual-, and ambipolar-redox-mediator-enhanced supercapacitors, the challenges they face, and approaches to suppress self-discharge and develop high-concentration redox-active electrolytes for performance promotion.

Synthesis of multifunctional CuFe2O4-reduced graphene oxide nanocomposite: an efficient magnetically separable catalyst as well as high performance supercapacitor and first-principles calculations of its electronic structures

Here, we report an 'in situ' co-precipitation reduction based synthetic methodology to prepare CuFe2O4 nanoparticle-reduced graphene oxide (CuFe2O4-RGO) nanocomposites. First principles calculations based on Density Functional Theory (DFT) were performed to obtain the electronic structures and properties of CuFe2O4, graphene and CuFe2O4-graphene composites, and to understand the interfacial interaction between CuFe2O4 and graphene in the composite. The synergistic effect, which resulted from the combination of the unique properties of RGO and CuFe2O4 nanoparticles, was exploited to design a magnetically separable catalyst and high performance supercapacitor. It has been demonstrated that the incorporation of RGO in the composite enhanced its catalytic properties as well as supercapacitance performance compared with pure CuFe2O4. The nanocomposite with 96 wt% CuFe2O4 and 4 wt% RGO (96CuFe2O4-4RGO) exhibited high catalytic efficiency towards (i) reduction of 4-nitrophenol to 4-aminophenol, and (ii) epoxidation of styrene to styrene oxide. For both of these reactions, the catalytic efficiency of 96CuFe2O4-4RGO was significantly higher than that of pure CuFe2O4. The easy magnetic separation of 96CuFe2O4-4RGO from the reaction mixture and good reusability of the recovered catalyst also showed here. 96CuFe2O4-4RGO also demonstrated better supercapacitance performance than pure CuFe2O4. 96CuFe2O4-4RGO showed specific capacitance of 797 F g-1 at a current density of 2 A g-1, along with ∼92% retention for up to 2000 cycles. To the best of our knowledge, this is the first investigation on the catalytic properties of CuFe2O4-RGO towards the reduction of 4-nitrophenol and the epoxidation reaction, and DFT calculations on the CuFe2O4-graphene composite have been reported.

High Performance of Supercapacitor from PEDOT:PSS Electrode and Redox Iodide Ion Electrolyte

Insufficient energy density and poor cyclic stability is still challenge for conductive polymer-based supercapacitor. Herein, high performance electrochemical system has been assembled by combining poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrene sulfonate) (PSS) redox electrode and potassium iodide redox electrolyte, which provide the maximum specific capacity of 51.3 mAh/g and the retention of specific capacity of 87.6% after 3000 cycles due to the synergic effect through a simultaneous redox reaction both in electrode and electrolyte, as well as the catalytic activity for reduction of triiodide of the PEDOT:PSS.

Hierarchical porous NiCo2O4/CeO2 hybrid materials for high performance supercapacitors

Hierarchical porous NiCo₂O₄/CeO₂ hybrid materials are successfully synthesized via a simple solvothermal method and subsequent heat treatment and exhibit remarkable electrochemical performances in supercapacitors.

Carbon Quantum Dot-Induced MnO2 Nanowire Formation and Construction of a Binder-Free Flexible Membrane with Excellent Superhydrophilicity and Enhanced Supercapacitor Performance

Manganese oxides (MnO₂) are regarded as typical and promising electrode materials for supercapacitors. However, the practical electrochemical performance of MnO₂ is far from its theoretical value. Nowadays, numerous efforts are being devoted to the design and preparation of nanostructured MnO₂ with the aim of improving its electrochemical properties. In this work, ultralong MnO₂ nanowires were fabricated in a process induced by carbon quantum dots (CQDs); subsequently, a binder-free flexible electrode membrane was easily obtained by vacuum filtration of the MnO₂ nanowires. The effects of the CQDs not only induced the formation of one-dimensional nanostructured MnO₂, but also significantly improved the wettability between electrode and electrolyte. In other words, the MnO₂ membrane demonstrated a superhydrophilic character in aqueous solution, indicating the sufficient and abundant contact probability between electrode and electrolyte. The binder-free flexible MnO₂ electrode exhibited a preeminent specific capacitance of 340 F g^-1 at 1 A g^-1; even when the current density reached 20 A g^-1, it still maintained 260 F g^-1 (76% retention rate compared to that at 1 A g^-1). Moreover, it also showed good cycling stability with 80.1% capacity retention over 10 000 cycles at 1 A g^-1. Furthermore, an asymmetric supercapacitor was constructed using the MnO₂ membrane and active carbon as the positive and negative electrodes, respectively, which exhibited a high energy density of 33.6 Wh kg^-1 at 1.0 kW kg^-1, and a high power density of 10 kW kg^-1 at 12.5 Wh kg^-1.

Nanowire Morphology of Mono- and Bidoped α-MnO2 Catalysts for Remarkable Enhancement in Soot Oxidation

In the present work, nanowire morphologies of α-MnO₂, cobalt monodoped α-MnO₂, Cu and Co bidoped α-MnO₂, and Ni and Co bidoped α-MnO₂ samples were prepared by a facile hydrothermal synthesis. The structural, morphological, surface, and redox properties of all the as-prepared samples were investigated by various characterization techniques, namely, scanning electron microscopy (SEM), transmission and high resolution electron microscopy (TEM and HR-TEM), powder X-ray diffraction (XRD), N₂ sorption surface area measurements, X-ray photoelectron spectroscopy (XPS), hydrogen-temperature-programmed reduction (H₂-TPR), and oxygen-temperature-programmed desorption (O₂-TPD). The soot oxidation performance was found to be significantly improved via metal mono- and bidoping. In particular, Cu and Co bidoped α-MnO₂ nanowires showed a remarkable improvement in soot oxidation performance, with its T₅₀ (50% soot conversion) values of 279 and 431 °C under tight and loose contact conditions, respectively. The soot combustion activation energy for the Cu and Co bidoped MnO₂ nanowires is 121 kJ/mol. The increased oxygen vacancies, greater number of active sites, facile redox behavior, and strong synergistic interaction were the key factors for the excellent catalytic activity. The longevity of Cu and Co bidoped α-MnO₂ nanowires was analyzed, and it was found that the Cu/Co bidoped α-MnO₂ nanowires were highly stable after five successive cycles and showed an insignificant decrease in soot oxidation activity. Furthermore, the HR-TEM analysis of a spent catalyst after five cycles indicated that the (310) crystal plane of α-MnO₂ interacts with the soot particles; therefore, we can assume that more-reactive exposed surfaces positively affect the reaction of soot oxidation. Thus, the Cu and Co bidoped α-MnO₂ nanowires provide promise as a highly effective alternative to precious metal based automotive catalysts.

Sonochemical preparation of stable porous MnO2 and its application as an efficient electrocatalyst for oxygen reduction reaction

Porous MnO₂ as a non-noble metal oxygen reduction reaction (ORR) electrocatalyst was prepared by a simple sonochemical route. The as-prepared porous MnO₂ exhibited higher electrocatalytic activity, superior stability and better methanol tolerance than commercial Pt/C catalyst in alkaline media. Furthermore, the ORR proceeded via a nearly four-electron pathway. Cyclic voltammetry (CV) and rotating-disk electrode (RDE) measurements verified that the ORR enhancement was attributed to the porous structure and good dispersity, which facilitated sufficient transport of ions, electrons, O₂ and other reactants in the process of ORR. The results indicated that a facile and feasible sonochemical route could be used to prepare highly active porous MnO₂ electrocatalyst for ORR, which might be promising for direct methanol fuel cells.

Preparation of graphene oxide-manganese dioxide for highly efficient adsorption and separation of Th(IV)/U(VI)

Manganese dioxide decorated graphene oxide (GOM) was prepared via fixation of crystallographic MnO2 (α, γ) on the surface of graphene oxide (GO) and was explored as an adsorbent material for simultaneous removal of thorium/uranium ions from aqueous solutions. In single component systems (Th(IV) or U(VI)), the α-GOM2 (the weight ratio of GO/α-MnO2 of 2) exhibited higher maximum adsorption capacities toward both Th(IV) (497.5mg/g) and U(VI) (185.2 mg/g) than those of GO. In the binary component system (Th(IV)/U(VI)), the saturated adsorption capacity of Th(IV) (408.8 mg/g)/U(VI) (66.8 mg/g) on α-GOM2 was also higher than those on GO. Based on the analysis of various data, it was proposed that the adsorption process may involve four types of molecular interactions including coordination, electrostatic interaction, cation-pi interaction, and Lewis acid-base interaction between Th(IV)/U(VI) and α-GOM2. Finally, the Th(IV)/U(VI) ions on α-GOM2 can be separated by a two-stage desorption process with Na2CO3/EDTA. Those results displayed that the α-GOM2 may be utilized as an potential adsorbent for removing and separating Th(IV)/U(VI) ions from aqueous solutions.

Construction of Hierarchical α-MnO2 Nanowires@Ultrathin δ-MnO2 Nanosheets Core-Shell Nanostructure with Excellent Cycling Stability for High-Power Asymmetric Supercapacitor Electrodes

Poor electrical conductivity and mechanical instability are two major obstacles to realizing high performance of MnO2 as pseudocapacitor material. The construction of unique hierarchical core-shell nanostructures, therefore, plays an important role in the efficient enhancement of the rate capacity and the stability of this material. We herein report the fabrication of a hierarchical α-MnO2 nanowires@ultrathin δ-MnO2 nanosheets core-shell nanostructure by adopting a facile and practical solution-phase technique. The novel hierarchical nanostructures are composed of ultrathin δ-MnO2 nanosheets with a few atomic layers growing well on the surface of the ultralong α-MnO2 nanowires. The first specific capacitance of hierarchical core-shell nanostructure reached 153.8 F g(-1) at the discharge current density of as high as 20 A g(-1), and the cycling stability is retained at 98.1% after 10,000 charge-discharge cycles, higher than those in the literature. The excellent rate capacity and stability of the hierarchical core-shell nanostructures can be attributed to the structural features of the two MnO2 crystals, in which a 1D α-MnO2 nanowire core provides a stable structural backbone and the ultrathin 2D δ-MnO2 nanosheet shell creates more reactive active sites. The synergistic effects of different dimensions also contribute to the superior rate capability.

A Novel and Facile One-Pot Solvothermal Synthesis of PEDOT-PSS/Ni-Mn-Co-O Hybrid as an Advanced Supercapacitor Electrode Material

In this work, a novel and facile one-pot method has been developed for the synthesis of a hybrid consisting of Ni-Mn-Co ternary oxide and poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (PEDOT-PSS/NMCO) with a hierarchical three-dimensional net structure via a solvothermal-coprecipitation coupled with oxidative polymerization route. Apart from the achievement of polymerization, coprecipitation, and solvothermal in one pot, the hydroxyl (OH(-)) ions generated from the oxidative polymerization of organic monomer by neutral KMnO4 solution were skillfully employed as precipitants for metal ions. As compared with the PEDOT-PSS/Ni-Mn binary oxide, PEDOT-PSS/Co-Mn binary oxide, and PEDOT-PSS/MnO2, PEDOT-PSS1.5/NMCO exhibits overwhelmingly superior supercapacitive performance, more specifically, a high specific capacitance of 1234.5 F g(-1) at a current density of 1 A g(-1), a good capacitance retention of 83.7% at a high current density of 5 A g(-1) after 1000 cycles, an energy density of 51.9 W h kg(-1) at a power density of 275 W kg(-1), and an energy density of 21.4 W h kg(-1) at an extremely elevated power density of 5500 W kg(-1). Noticeably, the energy density and power density of PEDOT-PSS/NMCO are by far higher than those of the existing analogues recently reported. The exceptional performance of PEDOT-PSS/NMCO benefits from its unique mesoporous architecture, which could provide a larger reaction surface area, faster ion and electron transfer ability, and good structural stability. The desirable integrated performance enables the multicomponent composite to be a promising electrode material for energy storage applications.

A review of electrolyte materials and compositions for electrochemical supercapacitors

Electrolytes have been identified as some of the most influential components in the performance of electrochemical supercapacitors (ESs), which include: electrical double-layer capacitors, pseudocapacitors and hybrid supercapacitors. This paper reviews recent progress in the research and development of ES electrolytes. The electrolytes are classified into several categories, including: aqueous, organic, ionic liquids, solid-state or quasi-solid-state, as well as redox-active electrolytes. Effects of electrolyte properties on ES performance are discussed in detail. The principles and methods of designing and optimizing electrolytes for ES performance and application are highlighted through a comprehensive analysis of the literature. Interaction among the electrolytes, electro-active materials and inactive components (current collectors, binders, and separators) is discussed. The challenges in producing high-performing electrolytes are analyzed. Several possible research directions to overcome these challenges are proposed for future efforts, with the main aim of improving ESs' energy density without sacrificing existing advantages (e.g., a high power density and a long cycle-life) (507 references).