Promoting the selection and maintenance of fetal liver stem/progenitor cell colonies by layer-by-layer polypeptide tethered supported lipid bilayer

Hybrid Surface Nanostructures Using Chemical Vapor Deposition and Colloidal Self-Assembled Patterns for Human Mesenchymal Stem Cell Culture—A Preliminary Study

Surface coatings are critical in biomaterials and biomedical devices. Chemical vapor deposition (CVD) is a well-known technology for the generation of thin films on a surface. However, the granular structures produced using CVD are rare. Recently, we used PPX-C, an excellent insulating material, for granular structure coating using CVD. Colloidal self-assembly is also a well-established method to generate granular structures named colloidal self-assembled patterns (cSAPs). In this study, we combined these two technologies to generate hierarchical granular structures and tested the biophysical effect of these hybrid surfaces on human bone marrow mesenchymal stem cells (hBMSCs). Two CVD-derived granular structures were made using water or glycerin droplets (i.e., CVD or GlyCVD surfaces). Water drops generate porous particles, while glycerin drops generate core–shell particles on the surface. These particles were dispersed randomly on the surface with sizes ranging from 1 to 20 μm. These CVD surfaces were hydrophobic (WCA ~ 80–110 degrees). On the other hand, a binary colloidal crystal (BCC), one type of cSAPs, composed of 5 μm Si and 400 nm carboxylated polystyrene (PSC) particles, had a close-packed structure and a hydrophilic surface (WCA ~ 45 degrees). The hybrid surfaces (i.e., CVD-BCC and GlyCVD-BCC) were smooth (Ra ~ 1.1–1.5 μm) and hydrophilic (WCA ~ 50 degrees), indicating a large surface coverage of BCC dominating the surface property. The hybrid surfaces were expected to be slightly negatively charged due to naturally charged CVD particles and negatively charged BCC particles. Cell adhesion was reduced on the hybrid surfaces, leading to an aggregated cell morphology, without reducing cell activity, compared to the flat control after 5 days. qPCR analysis showed that gene expression of type II collagen (COL2) was highly expressed on the GlyCVD-BCC without chemical induction after 3 and 14 days compared to the flat control. This proof-of-concept study demonstrates the potential of combining two technologies to make hybrid structures that can modulate stem cell attachment and differentiation.

Supported Lipid Bilayer Formation from Phospholipid-Fatty Acid Bicellar Mixtures

Supported lipid bilayers (SLBs) are versatile cell membrane-mimicking biointerfaces for various applications such as biosensors and drug delivery systems, and there is broad interest in developing simple, cost-effective methods to achieve SLB fabrication. One promising approach involves the deposition of quasi-two-dimensional bicelle nanostructures that are composed of long-chain phospholipids and either short-chain phospholipids or detergent molecules. While a variety of long-chain phospholipids have been used to prepare bicelles for SLB fabrication applications, only two short-chain phospholipids, 1,2-dihexanoyl-sn-glycero-3-phosphocholine and 1,2-diheptanoyl-sn-glycero-3-phosphocholine (collectively referred to as DHPC), have been investigated. There remains an outstanding need to identify natural alternatives to DHPC, especially ones that are more affordable, to improve fabrication prospects and application opportunities. Herein, we explored the potential to fabricate SLBs from bicellar mixtures composed of long-chain phospholipids and lauric acid (LA), which is a low-cost, naturally abundant fatty acid that is widely used in soapmaking and various industrial applications. Quartz crystal microbalance-dissipation (QCM-D) experiments were conducted to track bicelle adsorption onto silica surfaces as a function of bicelle composition and lipid concentration, along with time-lapse fluorescence microscopy imaging and fluorescence recovery after photobleaching (FRAP) experiments to further characterize lipid adlayer properties. The results identified optimal conditions where it is possible to efficiently form SLBs from LA-containing bicelles at low lipid concentrations while also unraveling mechanistic insights into the bicelle-mediated SLB formation process and verifying that LA-containing bicelles are biocompatible with human cells for surface coating applications.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Counting charges on membrane-bound peptides

Quantifying the number of charges on peptides bound to interfaces requires reliable estimates of (i) surface coverage and (ii) surface charge, both of which are notoriously difficult parameters to obtain, especially at solid/water interfaces. Here, we report the thermodynamics and electrostatics governing the interactions of l-lysine and l-arginine octamers (Lys₈ and Arg₈) with supported lipid bilayers prepared.

Quantifying the number of charges on peptides bound to interfaces requires reliable estimates of (i) surface coverage and (ii) surface charge, both of which are notoriously difficult parameters to obtain, especially at solid/water interfaces. Here, we report the thermodynamics and electrostatics governing the interactions of l-lysine and l-arginine octamers (Lys₈ and Arg₈) with supported lipid bilayers prepared from a 9 : 1 mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (sodium salt) (DMPG) from second harmonic generation (SHG) spectroscopy, quartz crystal microbalance with dissipation monitoring (QCM-D) and nanoplasmonic sensing (NPS) mass measurements, and atomistic simulations. The combined SHG/QCM-D/NPS approach provides interfacial charge density estimates from mean field theory for the attached peptides that are smaller by a factor of approximately two (0.12 ± 0.03 C m^–2 for Lys₈ and 0.10 ± 0.02 C m^–2 for Arg₈) relative to poly-l-lysine and poly-l-arginine. These results, along with atomistic simulations, indicate that the surface charge density of the supported lipid bilayer is neutralized by the attached cationic peptides. Moreover, the number of charges associated with each attached peptide is commensurate with those found in solution; that is, Lys₈ and Arg₈ are fully ionized when attached to the bilayer. Computer simulations indicate Lys₈ is more likely than Arg₈ to “stand-up” on the surface, interacting with lipid headgroups through one or two sidechains while Arg₈ is more likely to assume a “buried” conformation, interacting with the bilayer through up to six sidechains. Analysis of electrostatic potential and charge distribution from atomistic simulations suggests that the Gouy–Chapman model, which is widely used for mapping surface potential to surface charge, is semi-quantitatively valid; despite considerable orientational preference of interfacial water, the apparent dielectric constant for the interfacial solvent is about 30, due to the thermal fluctuation of the lipid–water interface.

Optimizing the Performance of Supported Lipid Bilayers as Cell Culture Platforms Based on Extracellular Matrix Functionalization

Strategies to fabricate biofunctionalized surfaces are essential for many biotechnological applications. Zwitterionic lipid bilayer coatings doped with lipids with chemically selective headgroups provide a robust platform for immobilization of biomolecules in an antifouling, protein resistant background. Herein, we assess the biological activity of two important components of the extracellular matrix (ECM), collagen type I (Col I) and fibronectin (FN), which are covalently attached to a supported lipid bilayer (SLB), and compare their activity with the same proteins, nonspecifically adsorbed onto a SiO₂ surface. The characterization of protein coatings by quartz crystal microbalance with dissipation revealed that Col I and FN attached to SLB are less dense and have higher structural flexibility than when adsorbed onto SiO₂. Cell adhesion, proliferation, and function, as well as Col I-FN interactions, were more efficient on the ECM-functionalized SLB, making it a promising platform for cell-based diagnostics, tissue engineering, medical implants, and biosensor development.

Promotion and guidance of neural network formation on SU-8 photoresist microchannels adjusted with multilayer films

Induction of neural stem/progenitor cells (NSPCs) and establishment of neural network are important issues on neural engineering. In this work, a platform was designed to control and evaluate the differentiation of NSPCs, neurite direction, and to promote the neurite outgrowth. Polyelectrolyte multilayer (PEM) films provide surface properties by and have been used to regulate NSPCs differentiation in our previous study. Herein, a culture platform composed of SU-8 microchannel and PEM films was designed to achieve the goal of promoting NSPCs differentiation and to evaluate the effect of PEM films on the guidance of neural network formation. In this culture platform, NSPCs were induced into functional neurons, and neural network formation was accomplished on ITO glass-PEM films successfully.

Nonspecific Binding Domains in Lipid Membranes Induced by Phospholipase A2

Phospholipase A2 (PLA2) is a peripheral membrane protein that can hydrolyze phospholipids to produce lysolipids and fatty acids. It has been found to play crucial roles in various cellular processes and is thought as a potential candidate for triggering drug release from liposomes for medical treatment. Here, we directly observed that PLA2 hydrolysis reaction can induce the formation of PLA2-binding domains at lipid bilayer interface and found that the formation was significantly influenced by the fluidity of the lipid bilayer. We prepared supported lipid bilayers (SLBs) with various molar ratios of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) to adjust the reactivity and fluidity of the lipid bilayers. A significant amount of the PLA2-induced domains was observed in mixtures of DPPC and DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) but not in either pure DPPC or pure DOPC bilayer, which might be the reason that previous studies rarely observed these domains in lipid bilayer systems. The fluorescently labeled PLA2 experiment showed that newly formed domains acted as binding templates for PLA2. The AFM result showed that the induced domain has stepwise plateau structure, suggesting that PLA2 hydrolysis products may align as bilayers and accumulate layer by layer on the support, and the hydrophobic acyl chains at the side of the layer structure may be exposed to the outside aqueous environment. The introduced hydrophobic region could have hydrophobic interactions with proteins and therefore can attract the binding of not only PLA2 but also other types of proteins such as proteoglycans and streptavidin. The results suggest that the formation of PLA2-induced domains may convert part of a zwitterionic nonsticky lipid membrane to a site where biomolecules can nonspecifically bind.

Niche Mimicking for Selection and Enrichment of Liver Cancer Stem Cells by Hyaluronic Acid-Based Multilayer Films

Cancer stem cells (CSCs) represent a subpopulation of tumor cells that exhibit capacities for self-renewal, tumor initiation, disease relapse or metastasis, and resistance to chemotherapy and radiotherapy. However, the major obstacle associated with the use of CSCs is the difficulty in their isolation and enrichment. According to recent studies, CSCs share similar properties with normal stem cells, and it has been observed that hyaluronan (HA) plays a key factor in CSCs niches and that HA-mediated CD44 interaction promotes tumor progression. Therefore, HA-based multilayer films were used to fabricate sequential surface properties variation and to mimic CSC niches. A quartz crystal microbalance was used to investigate the layer-by-layer adsorption of PAH/HA multilayer films. Colony formation was observed on a series of poly(allylamine hydrochloride) PAH/HA multilayer films, and cytotoxicity and cell viability were evaluated by MTT, LDH and live/dead assay. It was observed that the cells isolated from (PAH/HA)3 displayed the best colony formation ability and that the expression of CD133/CD44 double positive cells was up-regulated to approximately 70% after 7 days of culture. Furthermore, the cells isolated from (PAH/HA)3 displayed higher chemo-resistance than the control group. The stem-cell-related genes expression of selected cells from (PAH/HA)3 after 7 days of culture was significantly different from that of the control group. In conclusion, this study provides a label-free selection and enrichment system that could serve as a new strategy for the future development of CSC selection and drug evaluation in cancer therapy.

Evaluating the effects of charged oligopeptide motifs coupled with RGD on osteogenic differentiation of mesenchymal stem cells

Mesenchymal stem cells, due to their multilineage differentiation potential, have emerged as a promising cell candidate for cell-based therapy. In recent years, biomaterials were artificially synthesized to control the differentiation of mesenchymal stem cells. In this study, a series of charged or neutral oligopeptide motifs coupled with RGD were synthesized and used for surface modification using quartz substrates as model. Cell behaviors on the modified surfaces with different charged oligopeptide motifs were studied. It was found that these different charged oligopeptide motifs coupled with RGD were biocompatible for cell proliferation and adhesion. Moreover, it was demonstrated that the positively charged oligopeptide motif could inhibit osteogenic differentiation, while the negatively charged and neutral oligopeptide motifs could enhance osteogenic differentiation in the presence of RGD. This work may bring us enlightenment that different charged oligopeptide motifs coupled with RGD may be used for biomaterial surface modification for different stem cell-based therapies.