Reduction-responsive core-shell-corona micelles based on triblock copolymers: novel synthetic strategy, characterization, and application as a tumor microenvironment-responsive drug delivery system

Molecular Design and Controlled Self-Assembly of Copolymers as Core-Shell-Corona Nanoparticles for Smarter Tumor Treatment

Copolymer-based core-shell-corona nanoparticles have attracted more interest for tumor chemotherapy, owing to their unique multifunctionality benefiting from their unique multilevel topological structure in comparison with the conventional core-shell ones. Here, the recent progress in such core-shell-corona nanoparticle-based drug delivery systems (DDSs) in tumor chemotherapy was reviewed, focusing on additive functionality of the shell layer for controlled drug release performance from the viewpoints of the molecular design and controlled self-assembly, such as stimuli-responsive gatekeepers, independent loading of active substances, and so on. Moreover, future perspectives have been prospected for smarter tumor treatment.

Preparation of reversible cross-linked amphiphilic polymeric micelles with pH-responsive behavior for smart drug delivery

A new type of reversible cross-linked and pH-responsive polymeric micelle (PM), poly[polyethylene glycol methacrylate-co-2-(acetoacetoxy)ethyl methacrylate]-b-poly [2-(dimethylamino)ethyl methacrylate] [P(PEGMA-co-AEMA)-b-PDMAEMA], was synthesized for targeted delivery of curcumin. After reversible cross-linking of the micellar shell, the PMs with a typical core-shell structure exhibited excellent stability against extensive dilution and good reversibility of pH-responsiveness in solutions with different pH values. P(PEGMA9-co-AEMA6)-b-PDMAEMA10 has the lowest critical micelle concentration (CMC) value (0.0041 mg mL-1), the highest loading capacity (13.86%) and entrapment efficiency (97.03%). A slow sustained drug release at pH 7.4 with 12.36% in 108 h, while a fast release (42.36%) was observed at pH 5.0. Furthermore, a dissipative particle dynamics (DPD) simulation method was employed to investigate the self-assembly process and pH-responsive behavior of PMs. The optimal drug-carrier ratio (2%) and fraction of water (92%) were confirmed by analyzing the drug distribution and morphology of micelles during the self-assembly process of the block copolymer. The simulation results were consistent with experimental results, indicating DPD simulation shows potential to study the structure properties of reversible cross-linked micelles. The present findings provide a new method for the development of SDDS with good structural stability and controlled drug release properties.

Ciprofloxacin-Loaded Mixed Polymeric Micelles as Antibiofilm Agents

In this work, mixed polymeric micelles (MPMs) based on a cationic poly(2-(dimethylamino)ethyl methacrylate)-b-poly(ε-caprolactone)-b-poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA₂₉-b-PCL₇₀-b-PDMAEMA₂₉) and a non-ionic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO₉₉-b-PPO₆₇-b-PEO₉₉) triblock copolymers, blended at different molar ratios, were developed. The key physicochemical parameters of MPMs, including size, size distribution, and critical micellar concentration (CMC), were evaluated. The resulting MPMs are nanoscopic with a hydrodynamic diameter of around 35 nm, and the ζ-potential and CMC values strongly depend on the MPM's composition. Ciprofloxacin (CF) was solubilized by the micelles via hydrophobic interaction with the micellar core and electrostatic interaction between the polycationic blocks, and the drug localized it, to some extent, in the micellar corona. The effect of a polymer-to-drug mass ratio on the drug-loading content (DLC) and encapsulation efficiency (EE) of MPMs was assessed. MPMs prepared at a polymer-to-drug mass ratio of 10:1 exhibited very high EE and a prolonged release profile. All micellar systems demonstrated their capability to detach pre-formed Gram-positive and Gram-negative bacterial biofilms and significantly reduced their biomass. The metabolic activity of the biofilm was strongly suppressed by the CF-loaded MPMs indicating the successful drug delivery and release. The cytotoxicity of empty and CF-loaded MPMs was evaluated. The test reveals composition-dependent cell viability without cell destruction or morphological signs of cell death.

NIR-II Fluorescent Activatable Drug Delivery Nanoplatform for Cancer-Targeted Combined Photodynamic and Chemotherapy

Nanotheranostics with integrated imaging functions can help monitor nanoparticle accumulation in tumors, thus achieving synergism and higher therapeutic accuracy in cancer therapy. However, it remains challenging to monitor the release of therapeutic drugs in real time from a nanoparticulate drug delivery system (nano-DDS) in the body. Herein, we developed a nano-DDS for fluorescence imaging in the second near-infrared window (NIR-II) region, which can be used for monitoring the responsive release of drugs and cancer-targeted combined photodynamic and chemotherapy. There is a linear correlation between the cumulative release of the drug and the NIR-II fluorescence intensity. Moreover, hyaluronidase/glutathione dual-response RGD-SS-DOX/Ce6@HA-IR-1061 (RSSDCHI) exhibited a higher tumor-to-normal-tissue ratio in NIR-II fluorescence imaging and enhanced antitumor efficacy in vivo. This makes it possible to visualize drug release at the cellular level by the nanocomposites and to predict the treatment effect according to the NIR-II fluorescence intensity in the tumor site, serving as a promising nanoplatform for precision nanomedicine.

Near-Infrared Light-Responsive Shell-Crosslinked Micelles of Poly(d,l-lactide)-b-poly((furfuryl methacrylate)-co-(N-acryloylmorpholine)) Prepared by Diels-Alder Reaction for the Triggered Release of Doxorubicin

In the present study, we developed near-infrared (NIR)-responsive shell-crosslinked (SCL) micelles using the Diels-Alder (DA) click reaction between an amphiphilic copolymer poly(d,l-lactide)20-b-poly((furfuryl methacrylate)10-co-(N-acryloylmorpholine)78) (PLA20-b-P(FMA10-co-NAM78)) and a diselenide-containing crosslinker, bis(maleimidoethyl) 3,3'-diselanediyldipropionoate (BMEDSeDP). The PLA20-b-P(FMA10-co-NAM78) copolymer was synthesized by RAFT polymerization of FMA and NAM using a PLA20-macro-chain transfer agent (PLA20-CTA). The DA reaction between BMEDSeDP and the furfuryl moieties in the copolymeric micelles in water resulted in the formation of SCL micelles. The SCL micelles were analyzed by 1H-NMR, FE-SEM, and DLS. An anticancer drug, doxorubicin (DOX), and an NIR sensitizer, indocyanine green (ICG), were effectively incorporated into the SCL micelles during the crosslinking reaction. The DOX/ICG-loaded SCL micelles showed pH- and NIR-responsive drug release, where burst release was observed under NIR laser irradiation. The in vitro cytotoxicity analysis demonstrated that the SCL was not cytotoxic against normal HFF-1 cells, while DOX/ICG-loaded SCL micelles exhibited significant antitumor activity toward HeLa cells. Thus, the SCL micelles of PLA20-b-P(FMA10-co-NAM78) can be used as a potential delivery vehicle for the controlled drug release in cancer therapy.

1, 2-Dihexadecanoyl-sn-glycero-3-phosphoethanolamin (DPPE), doxorubicin and folic acid conjugated micelles for cancer management in tumor bearing BALB/c mice

Aim of the present investigation was to assess and compare the in-vitro and in-vivo cancer targeting propensity of DPPE-FA-DOX Micelles and free DOX in tumor bearing BALB/c mice. The DOX was conjugated with 1, 2-Dihexadecanoyl-sn-glycero-3-phosphoethanolamin (DPPE) and folic acid using Di-cyclohexyl-carbodiimide, confirmed by Fourier transform infrared spectroscopy (FTIR) and proton NMR. DPPE-FA-DOX micelles were prepared using thin film method and evaluated for zeta potential, particle size, surface morphology, in- vitro drug release study etc. In-vitro anticancer activity and apoptosis assay was evaluated in breast cancer (MCF-7) cells using MTT assay and flow cytometer respectively. In-vivo biodistribution and toxicity assessment were evaluated in rats whereas antitumor activity in tumor bearing BALB/c mice. Prepared micelles were spherical with size and zeta potential of 295.6 + 84.4 nm and 0.8 ± 0.24 mV respectively. Apoptosis assay for DPPE-FA-DOX micelles treated cells using Annexin V/PI staining demonstrated 56.2% apoptotic cells. Remarkably, DPPE-FA-DOX micelles improved DOX bioavailability by 7 fold and diminished plasma elimination with no sign of tissue toxicity compared to free DOX. In-vivo biodistribution studies revealed that micelles facilitated higher accumulation of DOX in tumor than free DOX. DPPE-FA-DOX micelles treated mice survived for 62 days than Free DOX (40 days), revealed by Kaplan-Meier survival curve analysis. Histopathological examination of liver, kidney and heart tissues of micelles treated rat's corroborated reduced systemic toxicity than free DOX. Conclusively, DPPE-FA-DOX micelles could potentially facilitate the targeted delivery of DOX to tumors.

Thermo/glutathione-sensitive release kinetics of heterogeneous magnetic micro-organogel prepared by sono-catalysis

To improve the loading and delivery for hydrophobic drugs and optimize the release efficiency in tumor microenvironment, a novel core-shell magnetic micro-organogel carrier was successfully prepared by a sono-catalysis process in the study. As-synthesized magnetic micro-organogel had an appropriate dispersibility in water owing to the hydrophilicity of protein shell and could be kept steadily with a well-defined spherical morphology owing to the three-dimensional gel structure of oil core, and it promised an accessible targeted drug delivery owing to its good magnetism-mediated motion ability. Moreover, the magnetic micro-organogel showed a high loading efficiency up to 94.22% for coumarin 6 which was dissolved into the micro-organogel as a model hydrophobic drug. More importantly, the release kinetics revealed that the magnetic micro-organogel had a thermo-sensitive and glutathione (GSH)-sensitive ability to control the drug release, and proved that its release mechanisms referred to the combination of erosion, diffusion and degradation.

Tumor-targeted Drug Delivery by Nanocomposites

BACKGROUND

Tumor-targeted delivery by nanoparticles is a great achievement towards the use of highly effective drug at very low doses. The conventional development of tumor-targeted delivery by nanoparticles is based on enhanced permeability and retention (EPR) effect and endocytosis based on receptor-mediated are very demanding due to the biological and natural complications of tumors as well as the restrictions on the design of the accurate nanoparticle delivery systems.

METHODS

Different tumor environment stimuli are responsible for triggered multistage drug delivery systems (MSDDS) for tumor therapy and imaging. Physicochemical properties, such as size, hydrophobicity and potential transform by MSDDS because of the physiological blood circulation different, intracellular tumor environment. This system accomplishes tumor penetration, cellular uptake improved, discharge of drugs on accurate time, and endosomal discharge.

RESULTS

Maximum drug delivery by MSDDS mechanism to target therapeutic cells and also tumor tissues and sub cellular organism. Poorly soluble compounds and bioavailability issues have been faced by pharmaceutical industries, which are resolved by nanoparticle formulation.

CONCLUSION

In our review, we illustrate different types of triggered moods and stimuli of the tumor environment, which help in smart multistage drug delivery systems by nanoparticles, basically a multi-stimuli sensitive delivery system, and elaborate their function, effects, and diagnosis.

Metallic Oxide-Induced Self-Assembly of Block Copolymers to Form Polymeric Hybrid Micelles with Tunable Stability for Tumor Microenvironment-Responsive Drug Delivery

Since block copolymers are able to self-assemble into various polymeric architectures, it is intriguing to explore a unique self-assembly strategy for polymers. Two different metallic oxides [manganese dioxide (MnO2) and zinc oxide (ZnO)] are displayed herein to demonstrate this self-assembly mechanism of polymers. In situ generation of metallic oxides induces self-assembly of block copolymers to form polymeric hybrid micelles with tunable stability in aqueous solutions. These final ZnO-cross-linked polymeric micelles exhibited a high drug loading capacity of 0.41 mg mg-1 toward doxorubicin (DOX), whereas DOX-loaded ZnO-cross-linked polymeric micelles could be broken down into Zn2+ and polymer scraps, which facilitated drug release in tumor microenvironments. Both in vitro and in vivo investigations showed that the drug-loaded ZnO-cross-linked polymeric micelles effectively suppressed tumor growth. Accordingly, the present study demonstrates a novel strategy of polymer self-assembly for fabricating polymeric architectures that can potentially provide insight for developing other polymeric architectures.

Stimuli-responsive nanocarriers for therapeutic applications in cancer

Cancer has become a very serious challenge with aging of the human population. Advances in nanotechnology have provided new perspectives in the treatment of cancer. Through the combination of nanotechnology and therapeutics, nanomedicine has been successfully used to treat cancer in recent years. In terms of nanomedicine, nanocarriers play a key role in delivering therapeutic agents, reducing severe side effects, simplifying the administration scheme, and improving therapeutic efficacies. Modulations of the structure and function of nanocarriers for improved therapeutic efficacy in cancer have attracted increasing attention in recent years. Stimuli-responsive nanocarriers penetrate deeply into tissues and respond to external or internal stimuli by releasing the therapeutic agent for cancer therapy. Notably, stimuli-responsive nanocarriers reduce the severe side effects of therapeutic agents, when compared with systemic chemotherapy, and achieve controlled drug release at tumor sites. Therefore, the development of stimuli-responsive nanocarriers plays a crucial role in drug delivery for cancer therapy. This article focuses on the development of nanomaterials with stimuli-responsive properties for use as nanocarriers, in the last few decades. These nanocarriers are more effective at delivering the therapeutic agent under the control of external or internal stimuli. Furthermore, nanocarriers with theranostic features have been designed and fabricated to confirm their great potential in achieving effective treatment of cancer, which will provide us with better choices for cancer therapy.

Berberine-Loaded Thiolated Pluronic F127 Polymeric Micelles for Improving Skin Permeation and Retention

Background

Challenges associated with local antibacterial and anti-inflammatory drugs include low penetration and retention of drugs at the expected action site. Additionally, improving these challenges allows for the prevention of side effects that are caused by drug absorption into the systemic circulation and helps to safely treat local skin diseases.

Methods

In the current study, we successfully prepared a thiolated pluronic F127 polymer micelles (BTFM), which binds to keratin through a disulphide bond, to produce skin retention. In addition, the small particle size of polymer micelles promotes the penetration of carriers into the skin. The current study was divided into two experiments: an in vitro experiment; an in vivo experiment that involved the penetration of the micelle-loaded drugs into the skin of rats, the skin irritation test and the anti-inflammatory activity of the drug-loaded micelles on dimethyl benzene-induced ear edema in mice.

Results

Results from our in vitro transdermal experiment revealed that the amount of drug absorbed through the skin was decreased after the drug was loaded in the BTFM. Further, results from the vivo study, which used fluorescence microscopy to identify the location of the BTFM after penetration, revealed that there was strong fluorescence in the epidermis layer, but there was no strong fluorescence in the deep skin layer. In addition, the BTFM had a very good safety profile with no potentially hazardous skin irritation and transdermal administration of BTFM could significantly suppress ear edema induced by dimethyl benzene. Therefore, these findings indicated that BTFM reduced the amount of drug that entered the systemic circulation. Our results also demonstrated that the BTFM had a certain affinity for keratin.

Conclusion

Our experimental results suggest that the BTFM may be an effective drug carrier for local skin therapy with good safety profile.

Nanoparticulated Systems Based on Natural Polymers Loaded with Miconazole Nitrate and Lidocaine for the Treatment of Topical Candidiasis

People with weakened immune systems are at risk of developing candidiasis which is a fungal infection caused by several species of Candida genus. In this work, polymeric nanoparticles containing miconazole nitrate and the anesthetic lidocaine clorhydrate were developed. Miconazole was chosen as a typical drug to treat buccopharyngeal candidiasis whereas lidocaine may be useful in the management of the pain burning, and pruritus caused by the infection. Nanoparticles were synthesized using chitosan and gelatin at different ratios ranging from 10:90 to 90:10. The nano-systems presented nanometric size (between 80 and 300 nm in water; with polydispersion index ranging from 0.120 to 0.596), and positive Z potential (between 20.11 and 37.12 mV). The determined encapsulation efficiency ranges from 65 to 99% or 34 to 91% for miconazole nitrate and lidocaine clorhydrate, respectively. X-ray diffraction and DSC analysis suggested that both drugs were in amorphous state in the nanoparticles. Finally, the systems fitted best the Korsmeyer-Peppas model showing that the release from the nanoparticles was through diffusion allowing a sustained release of both drugs and prolonged the activity of miconazole nitrate over time against Candida albicans for at least 24 h.

Factors affecting the morphology of some organic and inorganic nanostructures for drug delivery: characterization, modifications, and toxicological perspectives

Introduction: In this review, we aim to highlight the impact of various processes and formulation variables influencing the characteristics of certain surfactant-based nanoconstructs for drug delivery. Areas covered: The review includes the discussion on processing parameters for the preparation of nanoconstructs, especially those made up of surfactants. Articles published in last 15 years (437) were reviewed, 381 articles were selected for data review and most appropriate articles (215) were included in article. Effect of variables such as surfactant concentration and type, membrane additives, temperature, and pH-dependent transitions on morphology has been highlighted along with effect of shape on nanoparticle uptake by cells. Various characterization techniques explored for these nanostructures with respect to size, morphology, lamellarity, distribution, etc., and a separate section on polymeric vesicles and the influence of block copolymers, type of block copolymer, control of block length, interaction of multiple block copolymers on the structure of polymersomes and chimeric nanostructures have been discussed. Finally, applications, modification, degradation, and toxicological aspects of these drug delivery systems have been highlighted. Expert opinion: Parameters influencing the morphology of micelles and vesicles can directly or indirectly affect the efficacy of small molecule cellular internalization as well as uptake in the case of biologicals.[Figure: see text].

Multicompartment Polymeric Nanocarriers for Biomedical Applications

Multicompartment polymeric nanocarriers which mimic the compartmentalized architecture of living cells have received considerable research attention in the biomedical field. The advancement of synthetic polymeric chemistry has allowed multicompartment polymeric nanocarriers to be tailored for biomedical applications such as drug delivery, encapsulated catalysis, and artificial cellular mimics. In this review, polymer-based multicompartment nanocarriers (multicompartment micelles, multicompartment polymersomes, and capsosomes) have been discussed. This review focuses on multicompartment systems applied to biomedical applications over the last ten years. The synthetic procedures and structural properties that impact the specific application are also highlighted.

Europium based coordination polyelectrolytes enable core-shell-corona micelles as luminescent probes

Core-shell-corona (CSC) micelles have multiple layers, which can serve as separate compartments. This property allows them to combine multiple functionalities in a single nanoparticle, with obvious application potential. Here, we propose a new type of CSC micelles with an apolar core and a polyelectrolyte complex shell incorporating coordination polymers. We obtain these particles by using a poly(styrene)-b-poly(vinyl pyridine)-b-poly(ethylene oxide) (PS-b-PVP-b-PEO) triblock copolymer with quaternized PVP blocks. This polymer leads to well-defined CSC micelles with a cationic shell, which allows us to entrap anionic coordination polymers without disturbing the micellar structure. Useful properties can be imported in this way, e.g., europium (Eu)-based coordination polymers endow the CSC micelles with strong luminescence. Moreover, copper ions (Cu2+) can quench the luminescence because they disturb the Eu-ligand coordination. Upon adding sulfide ions (S2-), copper ions precipitate as CuS and the Eu-ligand bond as well as the corresponding luminescence are restored. This effect is highly specific for Cu2+ and S2-: other cations or anions hardly interfere with this "on-off-on" luminescence response towards Cu2+ and S2-, demonstrating the selectivity of these CSC micelles as detectors of copper and sulfide ions.

Aqueous Self-Assembly of Block Copolymers to Form Manganese Oxide-Based Polymeric Vesicles for Tumor Microenvironment-Activated Drug Delivery

HIGHLIGHTS

The formation of manganese oxide induces self-assembly of block copolymers to form polymeric vesicles. The polymeric vesicles possessed strong stability and high drug loading capacity. The drug-loaded polymeric vesicles have been demonstrated, especially in in vivo studies, to exhibit a higher efficacy of tumor suppression without known cardiotoxicity.

ABSTRACT

Molecular self-assembly is crucially fundamental to nature. However, the aqueous self-assembly of polymers is still a challenge. To achieve self-assembly of block copolymers [(polyacrylic acid–block–polyethylene glycol–block–polyacrylic acid (PAA₆₈–b–PEG₈₆–b–PAA₆₈)] in an aqueous phase, manganese oxide (MnO₂) is first generated to drive phase separation of the PAA block to form the PAA₆₈–b–PEG₈₆–b–PAA₆₈/MnO₂ polymeric assembly that exhibits a stable structure in a physiological medium. The polymeric assembly exhibits vesicular morphology with a diameter of approximately 30 nm and high doxorubicin (DOX) loading capacity of approximately 94%. The transformation from MnO₂ to Mn²⁺ caused by endogenous glutathione (GSH) facilitates the disassembly of PAA₆₈–b–PEG₈₆–b–PAA₆₈/MnO₂ to enable its drug delivery at the tumor sites. The toxicity of DOX-loaded PAA₆₈–b–PEG₈₆–b–PAA₆₈/MnO₂ to tumor cells has been verified in vitro and in vivo. Notably, drug-loaded polymeric vesicles have been demonstrated, especially in in vivo studies, to overcome the cardiotoxicity of DOX. We expect this work to encourage the potential application of polymer self-assembly. [Image: see text]

ELECTRONIC SUPPLEMENTARY MATERIAL

The online version of this article (10.1007/s40820-020-00447-9) contains supplementary material, which is available to authorized users.

Magnetic resonance energy transfer for in vivo glutathione susceptibility weighted imaging

Glutathione (GSH) plays a vital role in maintaining biological redox homeostasis. Accordingly, accurate imaging of glutathione in vivo is of great significance. Herein, we propose a magnetic resonance energy transfer (MRET) strategy based on a distance-dependent magnetic exchange coupling effect (MECE), which can realize GSH detection within tumors in vivo by susceptibility weighted imaging (SWI). Fe₃O₄ nanoparticles (NPs) and CoFe₂O₄ NPs linked with cystamine (Fe₃O₄-S-S-CoFe₂O₄) have been successfully designed as SWI nanoprobes. After the disulfide bonds are broken by excess GSH in the tumor, the increase in the distance between Fe₃O₄ NPs and CoFe₂O₄ NPs will induce a decrease of MECE and magnetic susceptibility. As a result, the changes in the SWI signals are used for tumor GSH detection in vivo. Experimental results in vitro and in vivo demonstrate that the Fe₃O₄-S-S-CoFe₂O₄ SWI nanoprobe can sensitively detect concentrations of GSH in tumors. Hence, this strategy not only improves the sensitivity of the GSH response in SWI but also provides a powerful basis for the design of other responsive functional MRI nanoprobes.

Polymerization of dopamine accompanying its coupling to induce self-assembly of block copolymer and application in drug delivery

The polymerization of dopamine and its coupling occur in succession, which synergistically induces the self-assembly of block copolymer to yield ordered structures, including micelles and vesicles.

Enzyme-responsive polymeric micelles with fluorescence fabricated through aggregation-induced copolymer self-assembly for anticancer drug delivery

The TPE moiety with AIE is employed as functional hydrophobic chain to induce copolymer self-assembly and form polymeric micelle that can show enzyme-responsive drug delivery.

Ultrasonic-assisted fabrication and release kinetics of two model redox-responsive magnetic microcapsules for hydrophobic drug delivery

The smart biocompatible carriers have an advantage in the high-efficiency delivery and stimuli-responsive release of drugs. This study describes two model magnetic microcapsules (MMC) fabricated by sonicating the hydrophobic drug-loaded oil phase in an albumin aqueous solution, where magnetic nanoparticles are either encapsulated into the core or embedded onto the albumin shell. The as-prepared MMC with magnetic shell (MS) or with magnetic core (MC) shows an appropriate dispersibility with a well-defined spherical morphology in water, an excellent magnetism-mediated shifting ability for targeted drug delivery, and a good biocompatibility for high-level cell viability. Moreover, both the two microcapsules also show a high efficiency to trap the hydrophobic drugs, where the embedding ratios are 87.41% for MMC-MS and 95.31% for MMC-MC, respectively. Meanwhile in current study, the release kinetics and mechanism reveal that the sulfhydryl-crosslinked shell structure endows the MMC with a redox-responsive behavior to release the contents for controlled drug release, and the release rate or the release amount can be adjusted by changing the dosage of reducing agent. Therefore, the MMC have great potential as a smart carrier of hydrophobic drugs for enhancing the therapeutic efficiency.

The synthesis and co-micellization of PCL-P(HEMA/HEMA-LA) and PCL-P(HEMA/HEMA-FA) as shell cross-linked drug carriers with target/redox properties

In order to obtain target/redox shell cross-linked micelles (TCM), copolymers poly(ε-caprolactone)-poly(2-hydroxyethyl methacrylate/methacrylate-alpha lipoic acid) and poly(ε-caprolactone)-poly(2-hydroxyethyl methacrylate/methacrylate-folate, PCL-P(HEMA/HEMA-LA) and PCL-P(HEMA/HEMA-FA) were designed and synthesized. The copolymers PCL-P(HEMA/HEMA-LA) could form reduction-sensitive cross-linked micelles (CM) by using a catalytic amount of DTT. The micelles maintained high stability against dilution but were destroyed in 10 mM dithiothreitol (DTT). The drug loaded content (DLC) of CM was 8.9%, which was almost twice as much as non-cross-linked micelle (NCM). In vitro drug release at pH 7.4 showed that the cumulative release rate of CM in 36 h was less than 30%, while it was about 50% for NCM. When PCL-P(HEMA/HEMA-LA) and PCL-P(HEMA/HEMA-FA) (FA 1%, 3% and 5%) formed target/redox micelles, IC50 of TCM with FA 3% was the lowest (1.4 µg/mL) to Hela cells with excessive expression folate receptors. The cell uptake of TCM by Hela cells is higher than target non-cross-linked micelles (TNCM), while there was not much difference between both micelles uptaken by A549 cells, which are lack of folate receptors. Therefore, the drug carriers of TCM have potential to be explored as shell cross-linked target/redox drug carriers to the cancer cells on the surface with excessive folate receptors.

Nanostructured Chitosan-Based Biomaterials for Sustained and Colon-Specific Resveratrol Release

In the present work, we demonstrate the preparation of chitosan-based composites as vehicles of the natural occurring multi-drug resveratrol (RES). Such systems are endowed with potential therapeutic effects on inflammatory bowel diseases (IBD), such as Crohn's disease (CD) and ulcerative colitis, through the sustained colonic release of RES from long-lasting mucoadhesive drug depots. The loading of RES into nanoparticles (NPs) was optimized regarding two independent variables: RES/polymer ratio, and temperature. Twenty experiments were carried out and a Box⁻Behnken experimental design was used to evaluate the significance of these independent variables related to encapsulation efficiency (EE). The enhanced RES EE values were achieved in 24 h at 39 °C and at RES/polymer ratio of 0.75:1 w/w. Sizes and polydispersities of the optimized NPs were studied by dynamic light scattering (DLS). Chitosan (CTS) dispersions containing the RES-loaded NPs were ionically gelled with tricarballylic acid to yield CTS-NPs composites. Macro- and microscopic features (morphology and porosity studied by SEM and spreadability), thermal stability (studied by TGA), and release kinetics of the RES-loaded CTS-NPs were investigated. Release patterns in simulated colon conditions for 48 h displayed significant differences between the NPs (final cumulative drug release: 79⁻81%), and the CTS-NPs composites (29⁻34%).

Supramolecular micellar drug delivery system based on multi-arm block copolymer for highly effective encapsulation and sustained-release chemotherapy

A novel multi-arm polyphosphoester-based nanomaterial provides high drug loading efficiency and sustained-release drug delivery for effective chemotherapy.

Exchange dynamics between amphiphilic block copolymers and lipidic membranes through hydrophobic pyrene probe transfer

Vectorization has experienced significant development over the last few years and has been used to control the distribution of active ingredients to a target by their association with a vector. However, controlled drug delivery suffers from "burst release" as the drugs are released before the targeted site. Very few studies have examined the collective mechanisms of fission-fusion on micelles in the transport and expulsion of active ingredients. Endocytosis and exocytosis of cells are examples of fusion and fission in biological matter. Understanding these dynamics becomes crucial for the design and the control of new materials and new processes effective in controlled drug delivery. In this work, a study of the exchange dynamics between amphiphilic block copolymers and lipid membranes for vectorization of hydrophobic molecules using a fluorescence technique is presented. A highly hydrophobic alkylated pyrene, PyC₁₈, is used as a fluorescent probe that can be exchanged between amphiphilic block copolymer micelles and liposomes via different mechanisms. It is demonstrated that the exchange dynamics evaluated for different liposome concentrations is a collective mechanism characterized by having two rate constants.

Chemoenzymatic synthesis of dual-responsive graft copolymers for drug delivery: long-term stability, high loading and cell selectivity

A series of amphiphilic graft copolymers, poly(N-propargyldiethanolamine 4,4'-dithiodibutyionate)-graft-monomethoxy poly(ethylene glycol) (PPD-g-mPEG), were designed via a chemoenzymatic method for pH and reduced glutathione (GSH) dual-responsive drug delivery. The effects of percent grafting and molecular weights of mPEG on critical micelle concentration (CMC) values, size of micelles, drug loading and dual-response were tested. The graft copolymers could easily form homogeneous spherical micelles with appropriate sizes and zeta-potentials. The micelles of PPD-g-mPEG copolymers loaded doxorubicin (DOX) in high efficiency, and showed excellent stability under physiological conditions and synergetic dual-response to weakly acidic pH and GSH. In vitro experiments confirmed that the DOX-loaded micelles could be internalized into cancer cells efficiently and release DOX over time. Furthermore, cell cytotoxicity assays indicated that the graft copolymers were non-cytotoxic to both cancerous and normal cells while the DOX-loaded micelles greatly improved the selectivity ratios between HeLa cells and HL-7702 cells. DOX-loaded micelles also avoided hemolysis of red blood cells (RBCs) effectively compared with commercialized doxorubicin hydrochloride. All these demonstrated the potential of PPD-g-mPEG as a model to create more functional dual-responsive nanocarriers for controlled drug delivery.

Redox-responsive chemosensitive polyspermine delivers ursolic acid targeting to human breast tumor cells: The depletion of intracellular GSH contents arouses chemosensitizing effects

Antitumor efficacy of ursolic acid (UA) is seriously limited due to its low hydrophilicity and needy bioavailability. To overcome these obstacles, chemosensitive polyspermine (CPSP) conjugated with UA and folic acid (FA) as a novel targeted prodrug was designed and successfully synthesized in this investigation. This prodrug not only showed high aqueous solubility, GSH-triggered degradation and good biocompatibility, but also exhibited better inhibition effect on the tumor cells proliferation in comparison with free UA. FA-CPSP-UA could down-regulate the generation of GSH and manifest excellent ability in enhancing antitumor efficacy. In addition, FA-CPSP-UA could inhibit the expression of MMP-9, which led to restricting MCF-7 cells migration. Taken together, the results indicated that FA-CPSP-UA, as a carrier, can efficiently deliver UA to folate receptor positive cancer cells and improve tumor therapy of UA by Chemosensitive effect.

Recent advances in "smart" delivery systems for extended drug release in cancer therapy

Advances in nanomedicine have become indispensable for targeted drug delivery, early detection, and increasingly personalized approaches to cancer treatment. Nanoparticle-based drug-delivery systems have overcome some of the limitations associated with traditional cancer-therapy administration, such as reduced drug solubility, chemoresistance, systemic toxicity, narrow therapeutic indices, and poor oral bioavailability. Advances in the field of nanomedicine include “smart” drug delivery, or multiple levels of targeting, and extended-release drug-delivery systems that provide additional methods of overcoming these limitations. More recently, the idea of combining smart drug delivery with extended-release has emerged in hopes of developing highly efficient nanoparticles with improved delivery, bioavailability, and safety profiles. Although functionalized and extended-release drug-delivery systems have been studied extensively, there remain gaps in the literature concerning their application in cancer treatment. We aim to provide an overview of smart and extended-release drug-delivery systems for the delivery of cancer therapies, as well as to introduce innovative advancements in nanoparticle design incorporating these principles. With the growing need for increasingly personalized medicine in cancer treatment, smart extended-release nanoparticles have the potential to enhance chemotherapy delivery, patient adherence, and treatment outcomes in cancer patients.

Self-Healable Antifouling Zwitterionic Hydrogel Based on Synergistic Phototriggered Dynamic Disulfide Metathesis Reaction and Ionic Interaction

A self-healable antifouling hydrogel based on zwitterionic block copolymer was prepared via reversible addition-fragmentation chain transfer polymerization and Diels-Alder "click" chemistry. The hydrogel consists of a core-cross-linked zwitterionic block copolymer having poly(furfuryl methacrylate) as core and poly(dimethyl-[3-(2-methyl-acryloylamino)-propyl]-(3-sulfopropyl)ammonium) (poly(sulfobetaine)) as shell. The core was cross-linked with dithiobismaleimidoethane. The block copolymers were characterized by dynamic light scattering, field emission scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy (AFM), differential scanning calorimetry, water contact angle, and small-angle X-ray scattering analyses. This zwitterionic hydrogel showed self-healing activity via combined effect of phototriggered dynamic disulfide metathesis reaction and zwitterionic interaction, which was monitored by optical microscopy and AFM depth profilometry. The mechanical properties of the hydrogel before and after self-healing were studied using depth-sensing nanoindentation method. It was observed that the prepared zwitterionic hydrogel could reduce the formation of biofilm, which was established by studying the bovine serum albumin (model protein) adsorption over the coating. This multifunctional hydrogel can pave a new direction in antifouling self-healable gel coating applications.

One-Pot Synthesis of pH/Redox Responsive Polymeric Prodrug and Fabrication of Shell Cross-Linked Prodrug Micelles for Antitumor Drug Transportation

Shell cross-linked (SCL) polymeric prodrug micelles have the advantages of good blood circulation stability and high drug content. Herein, we report on a new kind of pH/redox responsive dynamic covalent SCL micelle, which was fabricated by self-assembly of a multifunctional polymeric prodrug. At first, a macroinitiator PBYP- ss- iBuBr was prepared via ring-opening polymerization (ROP), wherein PBYP represents poly[2-(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane]. Subsequently, PBYP- hyd-DOX- ss-P(DMAEMA- co-FBEMA) prodrug was synthesized by a one-pot method with a combination of atom transfer radical polymerization (ATRP) and a Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction using a doxorubicin (DOX) derivative containing an azide group to react with the alkynyl group of the side chain in the PBYP block, while DMAEMA and FBEMA are the abbriviations of N, N-(2-dimethylamino)ethyl methacrylate and 2-(4-formylbenzoyloxy)ethyl methacrylate, respectively. The chemical structures of the polymer precursors and the prodrugs have been fully characterized. The SCL prodrug micelles were obtained by self-assembly of the prodrug and adding cross-linker dithiol bis(propanoic dihydrazide) (DTP). Compared with the shell un-cross-linked prodrug micelles, the SCL prodrug micelles can enhance the stability and prevent the drug from leaking in the body during blood circulation. The average size and morphology of the SCL prodrug micelles were measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. The SCL micelles can be dissociated under a moderately acidic and/or reductive microenvironment, that is, endosomal/lysosomal pH medium or high GSH level in the tumorous cytosol. The results of DOX release also confirmed that the SCL prodrug micelles possessed pH/reduction responsive properties. Cytotoxicity and cellular uptake analyses further revealed that the SCL prodrug micelles could be rapidly internalized into tumor cells through endocytosis and efficiently release DOX into the HeLa and HepG2 cells, which could efficiently inhibit the cell proliferation. This study provides a fast and precise synthesis method for preparing multifunctional polymer prodrugs, which hold great potential for optimal antitumor therapy.

Fabrication of Hybrid Capsules via CaCO3 Crystallization on Degradable Coacervate Droplets

Organic-inorganic CaCO₃ capsules were prepared by crystallization of CaCO₃ on Pickering emulsion prepared using coacervate droplets made from thermoresponsive and degradable poly(2-methylene-1,3-dioxepane- co-2-hydroxyethyl acrylate) (poly(MDO- co-HEA)) in sole aqueous medium. The diameters of CaCO₃-based Pickering emulsion could be controlled by varying several parameters: diameter of CaCO₃ powders, initial polymer concentration, and copolymer composition. The CaCO₃ Pickering emulsion was able to load low-molecular-weight hydrophobic substances at temperatures above the lower critical solution temperature (LCST) due to formation of polymer-concentrated phases, i.e., coacervate droplets. The diameter of CaCO₃ capsules prepared by crystallization also depended on the diameter of the CaCO₃ Pickering emulsion. The CaCO₃ shell was composed of calcite-type crystals, the most stable polymorph among known CaCO₃ crystals. The facially prepared CaCO₃ capsules are valuable for use in functional biomaterials, such as drug delivery carriers and cell culture scaffolds for noninvasive bone-regenerative medicine.

Design and Development of Graphene Oxide Nanoparticle/Chitosan Hybrids Showing pH-Sensitive Surface Charge-Reversible Ability for Efficient Intracellular Doxorubicin Delivery

A novel graphene oxide nanoparticle (GON)-based drug delivery system containing GONs as carriers of anticancer drugs and chitosan/dimethylmaleic anhydride-modified chitosan (CS/CS-DMMA) as surface charge-reversible shells is fabricated via the classic self-assembly of the deprotonated carboxyl of GONs and the protonated amine of the CS backbone by electrostatic interaction, and CS-DMMA serves as the outmost layer. In this GON-based drug delivery system, the GON cores as desired carriers might adsorb doxorubicin hydrochloride (DOX) via the π-π stacking interaction between the large π conjugated structures of GO and the aromatic structure of DOX. Meanwhile, the chitosan-based polyelectrolyte shells served as a smart protection screen to evade the premature release of the as-loaded DOX in normal extracellular condition, and then, the release of DOX was accelerated because of the detachment of chitosan coating at low pH. Furthermore, the re-exposure of amino groups after hydrolysis of CS-DMMA endowed the drug delivery system with positive surface charge by taking advantage of the pH difference between physiological conditions and the tumor microenvironment to enhance the cellular uptake. Then, the pH-dependent site-specific drug release was realized. The in vitro investigations confirmed that these promising GON/CS/CS-DMMA hybrids with the charge-reversible character possessed various merits including excellent encapsulation efficiency, high stability under physiological conditions, enhanced cellular uptake by HepG2 cells, and tunable intracellular chemotherapeutic agent release profiles, proving its capability as an intelligent anticancer agent nanocarrier with enhanced therapeutic effects. This smart GON/CS/CS-DMMA vehicle with the surface charge-reversible character may be used as a significant drug delivery system for cancer treatment.

Validation of Smart Nanoparticles as Controlled Drug Delivery Systems: Loading and pH-Dependent Release of Pilocarpine

Micelles are good devices for use as controlled drug delivery systems because they exhibit the ability to protect the encapsulated substance from the routes of degradation until they reach the site of action. The present work assesses loading kinetics of a hydrophobic drug, pilocarpine, in polymeric micellar nanoparticles (NPs) and its pH-dependent release in hydrophilic environments. The trigger pH stimulus, pH 5.5, was the value encountered in damaged tissues in solid tumors. The new nanoparticles were prepared from an amphiphilic block copolymer, [(HEMA_19%-DMA_31%)-(FMA_5%-DEA_45%)]. For the present research, three systems were validated, two of them with cross-linked cores and the other without chemical stabilization. A comparison of their loading kinetics and release profiles is discussed, with the support of additional data obtained by scanning electron microscopy and dynamic light scattering. The drug was loaded into the NPs within the first minutes; the load was dependent on the degree of cross-linking. All of the systems experienced a boost in drug release at acidic pH, ranging from 50 to 80% within the first 48 h. NPs with the highest degree (20%) of core cross-linking delivered the highest percentage of drug at fixed times. The studied systems exhibited fine-tuned sustained release features, which may provide a continuous delivery of the drug at specific acidic locations, thereby diminishing side effects and increasing therapeutic rates. Hence, the studied NPs proved to behave as smart controlled drug delivery systems capable of responding to changes in pH.

Development of fisetin-loaded folate functionalized pluronic micelles for breast cancer targeting

The natural flavonoid fisetin (FS) has shown anticancer properties but its in-vivo administration remains challenging due to its poor aqueous solubility. The aim of the study was to develop FS loaded pluronic127 (PF)-folic acid (FA) conjugated micelles (FS-PF-FA) by the way of increasing solubility, bioavailability and active targetability of FS shall increase its therapeutic efficacy. FA-conjugated PF was prepared by carbodiimide crosslinker chemistry. FS-PF-FA micelles were prepared by thin-film hydration method and evaluated in comparison with free FS and FS loaded PF micelles (FS-PF). The smooth surfaces with spherical in shape of FS-PF-PF micelles displayed smaller in size (103.2 ± 6.1 nm), good encapsulation efficiency (82.50 ± 1.78%), zeta potential (-26.7 ± 0.44 mV) and sustained FS release. Bioavailability of FS from FS-PF-PF micelles was increased by 6-fold with long circulation time, slower plasma elimination and no sign of tissue toxicity as compared to free FS. Further, the FS-PF-FA micelles demonstrated active targeting effect on folate overexpressed human breast cancer MCF-7 cells. The concentration of the drug needed for growth inhibition of 50% of cells in a designed time period (GI50) was 14.3 ± 1.2 µg/ml for FS while it was greatly decreased to 9.8 ± 0.78 µg/ml, i.e. a 31.46% decrease for the FS-PF. Furthermore, the GI50 value for FS-PF-FA was 4.9 ± 0.4 µg/ml, i.e. a 65.737% decrease compared to FS and 50% decrease compare to FS-PF. The results indicate that the FS-PF-FA micelles have the potential to be applied for targeting anticancer drug delivery.