Plasmonic photosensitization of polyaniline prepared by a novel process for high-performance flexible photodetector

An investigation into the hybrid architecture of Mn-Co nanoferrites incorporated into a polyaniline matrix for photoresponse studies

In this study, an enhanced photoresponse was observed in the Mn-Co Nanoferrites (MCFs)-Polyaniline (PANI) nanohybrid architecture due to the formation of interface between PANI and MCFs, which provided a conduction pathway for the movement of charge carriers, and these interfaces were observed in a high-resolution transmission electron micrograph (HR-TEM). X-ray photoelectron spectroscopy (XPS) suggests that the carbon (C 1s) of the MCF-PANI nanohybrid shows peaks at 287.80 eV for CO, 286.17 eV for C-O, 285.24 eV for C-N, 284.50 eV for the sp3 hybridized carbon (C-C/C-H) and 283.84 eV for the sp2 hybridized carbon (CC). Current-voltage (I-V) curves reveal an ohmic nature of the MCF-PANI nanohybrid photodetector device. The photoresponse measurements were analyzed using the trap depth concept, demonstrating that the conductive polymer increases the photoconduction mechanism efficiency of MCFs. The constructed photodetector device exhibits a high photoresponsivity of 22.69 A W-1, a remarkable detectivity of 1.36 × 1012 cm Hz1/2 W-1 and a fast rise/decay time of 0.7/0.8 s. The excellent performance of the as-fabricated photodetector device could be explained by the intimate interaction between MCFs and PANI at their interface.

Earth-abundant and environmentally benign Ni-Zn iron oxide intercalated in a polyaniline based nanohybrid as an ultrafast photodetector

Nickel-zinc iron oxide (NZF) was introduced into a polyaniline (PANI) matrix by an in situ chemical oxidation polymerization approach. The surface composition and chemical states were investigated by X-ray photoelectron spectroscopy (XPS), which revealed an Fe 2p spectrum with the two peak positions of Fe 2p_3/2 and Fe 2p_1/2 at 711.00 and 724.48 eV, respectively. Deconvolution of the Fe 2p_3/2 peak revealed two components with binding energies of 713.98 and 718.16 eV, corresponding to the presence of Fe cations in the octahedral and tetrahedral sites. Additionally, the Rietveld refinement of NZF showed a cubic system with the Fd₃m space group. High-resolution transmission electron microscopy (HRTEM) analysis showed that the NZF material strongly interacts with polyaniline, while the selected area electron diffraction (SAED) pattern perfectly matched with the XRD data. Lognormal distribution was used to determine the particle size, which was found to be in the range of 1-100 nm. A flexible photodetector device utilizing the NZF-PANI nanohybrid was fabricated on an environmentally friendly, biodegradable cellulose paper substrate and the device exhibited excellent performance, i.e., a responsivity of 0.069 A W^-1 and detectivity of 7.258 × 10¹⁰ Jones at a very low voltage of 0.1 V. The non-stretched device showed a responsivity of 24.980 A W^-1 at 5 V, whereas at 2 cm^-1 bending curvature, the device showed a responsivity of 20.175 A W^-1, which was much higher than the responsivity of a commercial photodetector (<0.5 A W^-1).

Advanced Multifunctional Aqueous Rechargeable Batteries Design: From Materials and Devices to Systems

Multifunctional aqueous rechargeable batteries (MARBs) are regarded as safe, cost-effective, and scalable electrochemical energy storage devices, which offer additional functionalities that conventional batteries cannot achieve, which ideally leads to unprecedented applications. Although MARBs are among the most exciting and rapidly growing topics in scientific research and industrial development nowadays, a systematic summary of the evolution and advances in the field of MARBs is still not available. Therefore, the review presented comprehensively and systematically summarizes the design principles and the recent advances of MARBs by categories of smart ARBs and integrated systems, together with an analysis of their device design and configuration, electrochemical performance, and diverse smart functions. The two most promising strategies to construct novel MARBs may be A) the introduction of functional materials into ARB components, and B) integration of ARBs with other functional devices. The ongoing challenges and future perspectives in this research and development field are outlined to foster the future development of MARBs. Finally, the most important upcoming research directions in this rapidly developing field are highlighted that may be most promising to lead to the commercialization of MARBs and to a further broadening of their range of applications.

Flexible Photodetectors Based on Novel Functional Materials

Flexible photodetectors have attracted a great deal of research interest in recent years due to their great possibilities for application in a variety of emerging areas such as flexible, stretchable, implantable, portable, wearable and printed electronics and optoelectronics. Novel functional materials, including materials with zero-dimensional (0D) and one-dimensional (1D) inorganic nanostructures, two-dimensional (2D) layered materials, organic semiconductors and perovskite materials, exhibit appealing electrical and optoelectrical properties, as well as outstanding mechanical flexibility, and have been widely studied as building blocks in cost-effective flexible photodetection. Here, we comprehensively review the outstanding performance of flexible photodetectors made from these novel functional materials reported in recent years. The photoresponse characteristics and flexibility of the devices will be discussed systematically. Summaries and challenges are provided to guide future directions of this vital research field.

An ultrafast-temporally-responsive flexible photodetector with high sensitivity based on high-crystallinity organic-inorganic perovskite nanoflake

Flexible cameras are important early warning wearable devices to protect security personnel from dangerous events. However, the desired key component of flexible cameras, a highly-sensitive and high-response-speed flexible photodetector, is difficult to create using conventional inorganic semiconductors. Here, we propose a low-temperature synthesis method to grow perovskite nanoflakes with high flexibility and crystallinity on a polymeric substrate. Furthermore, a high-performance flexible photodetector based on the obtained perovskite nanoflakes was fabricated. Its photoresponsivity rivals the highest values reported and, simultaneously, its response speed is faster than those of most current flexible photodetectors by 1-3 orders of magnitude.

Flexible Photodetectors Based on 1D Inorganic Nanostructures

Flexible photodetectors with excellent flexibility, high mechanical stability and good detectivity, have attracted great research interest in recent years. 1D inorganic nanostructures provide a number of opportunities and capabilities for use in flexible photodetectors as they have unique geometry, good transparency, outstanding mechanical flexibility, and excellent electronic/optoelectronic properties. This article offers a comprehensive review of several types of flexible photodetectors based on 1D nanostructures from the past ten years, including flexible ultraviolet, visible, and infrared photodetectors. High-performance organic-inorganic hybrid photodetectors, as well as devices with 1D nanowire (NW) arrays, are also reviewed. Finally, new concepts of flexible photodetectors including piezophototronic, stretchable and self-powered photodetectors are examined to showcase the future research in this exciting field.

Self-Powered Broadband Photodetector using Plasmonic Titanium Nitride

We report the demonstration of plasmonic titanium nitride (TiN) for fabrication of an efficient hybrid photodetector. A novel synthesis method based on plasma nanotechnology is utilized for producing air stable plasma polymerized aniline-TiN (PPA-TiN) nanocomposite and its integration in photodetector geometry. The device performs as a self-powered detector that responds to ultraviolet and visible light at zero bias. The photodetector has the advantage of broadband absorption and outcomes an enhanced photoresponse including high responsivity and detectivity under low light conditions. This work opens up a new direction for plasmonic TiN-based hybrid nanocomposite and its exploitation in optoelectronic applications including imaging, light-wave communication and wire-free route for artificial vision.

Plasmonic Hot Hole Generation by Interband Transition in Gold-Polyaniline

Studies on hot carrier science and technology associated with various types of nanostructures are dominating today’s nanotechnology research. Here we report a novel synthesis of polyaniline-gold (PAni-Au) nanocomposite thin films with gold nanostructures (AuNs) of desired shape and size uniformly incorporated in the polymer matrix. According to shape as well as size variation of AuNs, two tunable plasmonic UV-Visible absorption bands are observed in each of the nanocomposites. Plasmonic devices are fabricated using PAni-Au nanocomposite having different UV-Visible plasmon absorption bands. However, all the devices show strong photoelectrical responses in the blue region (400–500 nm) of the visible spectrum. The d-band to sp-band (d-sp) transition of electrons in AuNs produces hot holes that are the only carriers in the material responsible for photocurrent generation in the device. This work provides an experimental evidence of novel plasmonic hot hole generation process that was still a prediction.