From polymer latexes to multifunctional liquid marbles

pH- and Photoresponsive Liquid Plasticine

Liquid marbles (LMs) can be prepared by adsorption of hydrophobic particles at the air-liquid interface of a water droplet. LMs have been studied for their application as microreaction vessels. However, their opaqueness poses challenges for internal observation. Liquid plasticines (LPs), akin to LMs, can be prepared by the adsorption of hydrophobic particles with a diameter of 50 nm or less, at the air-liquid interface of a water droplet. Unlike LMs, LPs are transparent, allowing for internal observation, thus presenting promising applications as reactors and culture vessels on a microliter scale. In this study, the surface of silica particles, approximately 20 nm in diameter, was rendered hydrophobic to prepare hydrophobic silica particles (SD0). A small amount of poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) was then grafted onto the surface of SD0, yielding SD1. SD0 particles exhibited consistent hydrophobicity irrespective of the environmental pH atmosphere. Under acidic conditions, SD1 became hydrophilic due to the protonation of pendant tertiary amines in the grafted PDPA chains. However, SD1 alone was unsuitable for LP preparation due to its high surface wettability regardless of atmospheric pH, attributable to the presence of PDPA-grafted chains. Therefore, to prepare pH-responsive LP, SD1 and SD0 were mixed (SD1/SD0 = 3/7). Upon exposure to HCl gas, these LPs ruptured, with the leaked water from the LPs being absorbed by adjacent paper. Moreover, clear LPs, prepared using an aqueous solution containing a water-soluble photoacid generator (PAG), disintegrated upon exposure to light as PAG generated acid, leading to LP breakdown. In summary, pH-responsive LPs, capable of disintegration under acidic conditions and upon light irradiation, were successfully prepared in this study.

Preparation of Oriented Superhydrophobic Surface to Reduce Agglomeration in Preparing Melt Marbles

Numerous innovative granulation techniques utilizing the concept of liquid marbles have been proposed before. However, these processes frequently encounter issues such as collisions, aggregation, and fragmentation of liquid/melt marble during the granulation process. In this study, the oriented superhydrophobic surface (OSS) was successfully prepared by utilizing copper wire to solve the above problem, facilitating efficient batch production and guided transportation of uniform marbles. The parameters and mechanisms of this process were thoroughly studied. The optimized structure is that the copper wire spacing (d) and height (h) are set as 1.0 and 0.1 mm, respectively. This resulted in a surface contact angle (CA) of 156° and anisotropic sliding (ΔSA) of 16.3 ± 1.34°. Using the prepared substrate, high-quality urea products were successfully obtained through the controlled transport of urea melt marbles. The mechanism of guided and directional drag reduction, based on the solid/solid contact on the surface, is proposed. These findings in this study have significant implications for improving granulation processes.

Exploring the Effects of Liquid Marbles' Deformation on Their Rolling Resistance

Liquid marbles (LMs) are nonwetting droplets manufactured by encapsulating droplets with micro- or nanoscale particles. These marbles are widely used as transport carriers for digital microfluidics due to their rapid displacement velocity and leak-free transport. An improved understanding of the resistance mechanism of rolling LMs is crucial for their transport and manipulation. In this study, we investigated the rolling resistance of LMs obtained with different powders and volumes using a high-speed camera. Our findings suggest that the deformation of liquid marbles would hinder their rolling by a resistance torque. To depict this resistance effect, we propose a theoretical model ( f ∼ λ ( ε - 1 2 Bo 1 / 2 ε 2 + 1 4 Bo ε 3 ) ) , where f is the rolling resistance of marbles, λ is the deflection coefficient, Bo is the Bond number, and (ε is the contact surface deformation) that accurately predicts the relationship between deformation and rolling resistance, which is supported by our experimental results. To further validate our theoretical model, we conducted three independent experiments: shape detection of prepared LMs, measuring the elastic force of LMs, and detecting the diffusive motion of the encapsulating particles. Furthermore, we discuss three factors that affect the rolling resistance: the volume of the marbles, the type and size of the encapsulating particles, and the substrate roughness. This comprehensive study not only generalizes the mechanism of deformation hindering the rolling of liquid marbles but also provides a theoretical framework to predict the relationship between the deformation and rolling resistance. These findings have practical implications for improving the manipulation efficiency and advancing the use of LMs as microfluidic carriers.

Time-Resolved Small-Angle X-ray Scattering Studies during the Aqueous Emulsion Polymerization of Methyl Methacrylate

Recently, we reported time-resolved synchrotron small-angle X-ray scattering (TR-SAXS) studies during aqueous emulsion polymerization using a bespoke stirrable reaction cell (J. Am. Chem. Soc.2021, 143, 1474–1484). This proof-of-concept study utilized a semifluorinated specialty monomer (2,2,2-trifluoroethyl methacrylate) to ensure high X-ray contrast relative to water. Herein, we extend this approach to emulsion polymerization of methyl methacrylate (MMA) in the presence or absence of sodium dodecyl sulfate (SDS) at 70 °C. Solution conductivity measurements for this anionic surfactant indicated a critical micelle concentration (CMC) of 10.9 mM at this temperature. Thus, SDS was employed at either 1.0 or 20.0 mM, which corresponds to well below or well above its CMC. Postmortem analysis by ¹H NMR spectroscopy indicated MMA conversions of 93–95% for these three formulations. We demonstrate that the X-ray contrast between water and PMMA is sufficiently large to produce high-quality scattering patterns during TR-SAXS experiments. Such patterns were fitted using a hard-sphere scattering model to monitor the evolution in particle diameter. This enabled (i) determination of the time point for the onset of nucleation and (ii) the evolution in particle size to be monitored during the MMA polymerization. The final particle diameters obtained from such TR-SAXS studies were consistent with postmortem DLS analyses, while TEM studies confirmed that near-monodisperse latex particles were formed. Micellar nucleation occurs within just 2 min when the SDS concentration is well above its CMC, resulting in a high particle number concentration and relatively small latex particles. In contrast, when SDS is either absent or present below its CMC, particle nuclei are formed by homogeneous nucleation over significantly longer time scales (14–15 min). In the latter case, adsorption of SDS onto nascent particles reduces their coagulation, giving rise to a larger number of smaller particles compared to the surfactant-free polymerization. However, the characteristic time required for the onset of nucleation is barely affected because this is mainly controlled by the kinetics of homogeneous polymerization of the relatively water-soluble MMA monomer within the aqueous phase. These results suggest that the aqueous emulsion polymerization of several other (meth)acrylic monomers, and perhaps also vinyl acetate, may be amenable to TR-SAXS studies.

Liquid marbles, floating droplets: preparations, properties, operations and applications

Liquid marbles (LMs) are non-wettable droplets formed with a coating of hydrophobic particles. They can move easily across either solid or liquid surfaces since the hydrophobic particles protect the internal liquid from contacting the substrate. In recent years, mainly due to their simple preparation, abundant materials, non-wetting/non-adhesive properties, elasticities and stabilities, LMs have been applied in many fields such as microfluidics, sensors and biological incubators. In this review, the recent advances in the preparation, physical properties and applications of liquid marbles, especially operations and floating abilities, are summarized. Moreover, the challenges to achieve uniformity, slow volatilization and stronger stability are pointed out. Various applications generated by LMs' structural characteristics are also expected.

Ionic Liquid-Based Surfactants: Recent Advances in Their Syntheses, Solution Properties, and Applications

The impetus for the expanding interest in ionic liquids (ILs) is their favorable properties and important applications. Ionic liquid-based surfactants (ILBSs) carry long-chain hydrophobic tails. Two or more molecules of ILBSs can be joined by covalent bonds leading, e.g., to gemini compounds (GILBSs). This review article focuses on aspects of the chemistry and applications of ILBSs and GILBSs, especially in the last ten years. Data on their adsorption at the interface and micelle formation are relevant for the applications of these surfactants. Therefore, we collected data for 152 ILBSs and 11 biamphiphilic compounds. The head ions of ILBSs are usually heterocyclic (imidazolium, pyridinium, pyrrolidinium, etc.). Most of these head-ions are also present in the reported 53 GILBSs. Where possible, we correlate the adsorption/micellar properties of the surfactants with their molecular structures, in particular, the number of carbon atoms present in the hydrocarbon "tail". The use of ILBSs as templates for the fabrication of mesoporous nanoparticles enables better control of particle porosity and size, hence increasing their usefulness. ILs and ILBSs form thermodynamically stable water/oil and oil/water microemulsions. These were employed as templates for (radical) polymerization reactions, where the monomer is the "oil" component. The formed polymer nanoparticles can be further stabilized against aggregation by using a functionalized ILBS that is co-polymerized with the monomers. In addition to updating the literature on the subject, we hope that this review highlights the versatility and hence the potential applications of these classes of surfactants in several fields, including synthesis, catalysis, polymers, decontamination, and drug delivery.

Responsive Photonic Liquid Marbles

Liquid marbles have potential to serve as mini-reactors for fabricating new materials, but this has been exploited little and mostly for conventional chemical reactions. Here, we uncover the unparalleled capability of liquid marbles to act as platforms for controlling the self-assembly of a bio-derived polymer, hydroxypropyl cellulose, into a cholesteric liquid crystalline phase showing structural coloration by Bragg reflection. By adjusting the cholesteric pitch via quantitative water extraction, we achieve liquid marbles that we can tailor for structural color anywhere in the visible range. Liquid marbles respond with color change that can be detected by eye, to changes in temperature, exposure to toxic chemicals and mechanical deformation. Our concept demonstrates the advantages of using liquid marbles as a miniature platform for controlling the liquid crystal self-assembly of bio-derived polymers, and their exploitation to fabricate sustainable, responsive soft photonic objects.

Influence of particle size on extraction from a charged bed - toward liquid marble formation

The interactions between particles and the role of their physical properties are not well understood for the electrostatic formation of liquid marbles. Here we focus initially on the impact of increasing particle diameter (notionally 20 to 140 μm) on the ease of particle extraction from an advancing bed of charged particles beneath an earthed, suspended water droplet. A larger particle diameter increased the ease of extraction, due to decreased interparticle cohesion, with increased potential applied to the particle bed. Whilst particle extraction is a crucial step in liquid marble formation, transport to the droplet and subsequent coating and stabilisation of the liquid is also significant. Further investigation highlighted that the smaller particle diameters afforded increased liquid stabilisation due to increased coverage and smaller interstitial spaces between particles on the liquid surface. Optimal conditions for controllable liquid marble formation using electrostatics was postulated as a trade-off between drop-bed separation distance, applied potential and kinetics of coating when studying impact of particle size. Furthermore, preliminary modelling, utilising weakest-link statistics and fracture mechanics, of the experimental data was undertaken to focus on development of the relationship between particle properties and extractability in the presence of electrostatics. This model represents a step towards predicting the suitability of particles for use in the electrostatic formation of liquid marbles prior to undertaking experimental work.

CO2-Triggered microreactions in liquid marbles

CO₂-Triggered microreactions in liquid marbles were developed by using CO₂ to coalesce contacting patchy liquid marbles containing separate reagents.

The Potential of Liquid Marbles for Biomedical Applications: A Critical Review

Liquid marbles (LM) are freestanding droplets covered by micro/nanoparticles with hydrophobic/hydrophilic properties, which can be manipulated as a soft solid. The phenomenon that generates these soft structures is regarded as a different method to generate a superhydrophobic behavior in the liquid/solid interface without modifying the surface. Several applications for the LM have been reported in very different fields, however the developments for biomedical applications are very recent. At first, the LM properties are reviewed, namely shell structure, LM shape, evaporation, floatability and robustness. The different strategies for LM manipulation are also described, which make use of magnetic, electrostatic and gravitational forces, ultraviolet and infrared radiation, and approaches that induce LM self-propulsion. Then, very distinctive applications for LM in the biomedical field are presented, namely for diagnostic assays, cell culture, drug screening and cryopreservation of mammalian cells. Finally, a critical outlook about the unexplored potential of LM for biomedical applications is presented, suggesting possible advances on this emergent scientific area.

Liquid Marbles, Elastic Nonstick Droplets: From Minireactors to Self-Propulsion

Liquid marbles are nonstick droplets wrapped by micro- or nanometrically scaled colloidal particles, representing a platform for a variety of chemical, biological, and microfluidics applications. Liquid marbles demonstrate elastic properties and do not coalesce when bounced or pressed. The effective surface tension and Young modulus of liquid marbles are discussed. Physical sources of the elasticity of liquid marbles are considered. Liquids and powders used for the fabrication of liquid marbles are surveyed. This feature article reviews properties and applications of liquid marbles. Liquid marbles demonstrate potential as microreactors, microcontainers for growing micro-organisms and cells, and microfluidics devices. The Marangoni-flow-driven self-propulsion of marbles supported by liquids is addressed.

MoS2 armored polystyrene particles with a narrow size distribution via membrane-assisted Pickering emulsions for monolayer-shelled liquid marbles

Monolayer-shelled liquid marbles were successfully stabilized by MoS₂ armored polystyrene particles with a narrow size distribution via membrane-assisted Pickering emulsions.