Soluble and meltable hyperbranched polyborosilazanes toward high-temperature stable SiBCN ceramics

Phase-Transformation Nanoparticles Synchronously Boosting Mechanical and Electromagnetic Performance of SiBCN Ceramics

Precursor-derived silicoboron carbonitride ceramic (PDC-SiBCN) has attracted significant attention as an advanced electromagnetic (EM) wave-absorbing material. However, the inherent porous and brittle characteristics limit its application as a structural load component in an EM interference environment. In this study, phase-transformation HfO₂ nanoparticles were incorporated into PDC-SiBCN to reduce volume shrinkage, improve bonding interactions, and control structural defects, simultaneously boosting the plastic deformation and EM performance of brittle ceramics. The obtained HfO₂/SiBCN ceramic showed enhanced flexural strength of up to 430.1% compared with that of the pure SiBCN ceramic. Furthermore, the HfO₂/SiBCN ceramic also demonstrated excellent high-temperature EM absorption. The minimum reflection coefficient (RC_min) could reach -45.26 dB, and the effective absorption bandwidth (EAB) covered 2.80 GHz of the X band at 2.28 mm thickness at room temperature. Furthermore, the RC_min can still reach -44.83 dB, and the EAB can cover 2.4 GHz at 1.58 mm even at 1073 K. This work shows that phase-transformation nanoparticles could simultaneously improve the deformation ability and EM wave absorption properties of SiBCN ceramics. The results could guide the design and preparation of PDCs with strong carrying capacity and excellent EM absorption, even in harsh environments.

Evaluating Use of Boron- and Hafnium-Modified Polysilazanes for Ceramic Matrix Minicomposites

In this study, the potential of polymer-derived ceramic matrix composites (CMCs) is demonstrated by the addition of thin ceramic coatings on carbon fiber (CF) bundles. Boron- and hafnium-modified polysilazane liquid precursors were synthesized and used to infiltrate the fiber bundles of CF to fabricate lab-scale Si(B)CN/CF and Si(Hf)CN/CF CMC minicomposites, respectively by crosslinking and then pyrolysis at 800 °C. The crosslinked precursor to ceramic yield was observed to be as high as 90% when the procedure was carried out in inert environment. The Si(B)CN/CF contained Si-N and B-N bonds, while Si-N and Hf-O-Si bonds were observed for the Si(Hf)CN/CF sample with uniform and dense surfaces. Room-temperature tensile tests showed that the Si(Hf)CN/CF sample could reach a tensile strength of ∼790 MPa and an elastic modulus of 66.88 GPa among the composites. An oxidation study of the Si(Hf)CN/CF minicomposites showed higher stability compared to SiCN/CF and Si(B)CN/CF minicomposites up to 1500 °C.

Recent advances in precursor-derived ceramics integrated with two-dimensional materials

This review focused on the recent advances in precursor-derived ceramics integrated with two-dimensional materials. Their fabrication methods, structures and applications were discussed in detail and the perspectives in this field were presented.

Strong and thermostable hydrothermal carbon coated 3D needled carbon fiber reinforced silicon-boron carbonitride composites with broadband and tunable high-performance microwave absorption

Excellent electromagnetic wave (EMW) absorbing materials with high-temperature stable and superior mechanical properties are among the most promising candidates for practical application. Here, novel hydrothermal carbon coated three-dimensional (3D) needled carbon fiber reinforced silicon-boron carbonitride (HC-CF/SiBCN) composites with a hierarchical A (CF)/B (HC)/C (SiBCN) structure were constructed and prepared for the first time by combining hydrothermal transformation and precursor infiltration and pyrolysis (PIP) process. The thickness of the HC coating controlled by the glucose concentration played a crucial role in tailoring the EMW capacity of the composite. The incorporation of SiBCN could not only effectively improve the oxidation resistance but also actively enhance the mechanical properties of the HC coated CF structure. Compared to the weak high-temperature oxidation resistance and mechanical properties of pristine 3D needled CF felt, the composites after the introduction of HC and SiBCN were thermostable in air atmosphere beyond 1000 °C to about above 70% weight retention, and the maximum flexural and compression strength of the composites could reach to 23.51 ± 1.37 and 12.22 ± 1.12 MPa, respectively. A substantial enhancement of EMW absorption ability was achieved through incorporation of HC and SiBCN, which could be attributed to the matched characteristic impedance and enhanced loss ability, whose optimization EMW absorption performance was the minimum reflection loss (RL_min) of -52.08 dB and effective absorption bandwidth (EAB) of 7.64 GHz for the composite obtained by two PIP cycles with 24 wt% glucose solution, demonstrating that the HC-CF/SiBCN composites with high-temperature stable, excellent mechanical and superior EMW absorption properties could be considered as a promising candidate for the applications in harsh environments.

Graphene Shield by SiBCN Ceramic: A Promising High-Temperature Electromagnetic Wave-Absorbing Material with Oxidation Resistance

As cutting-edge emerging electromagnetic (EM) wave-absorbing materials, the Achilles' heel of graphenes is vulnerable to oxidation under high temperature and oxygen atmosphere, particularly at temperatures more than 600 °C. Herein, a graphene@Fe₃O₄/siliconboron carbonitride (SiBCN) nanocomplex with a hierarchical A/B/C structure, in which SiBCN serves as a "shield" to protect graphene@Fe₃O₄ from undergoing high-temperature oxidation, was designed and tuned by polymer-derived ceramic route. The nanocomplexes are stable even at 1100-1400 °C in either argon or air atmosphere. Their minimum reflection coefficient (RC_min) and effective absorption bandwidth (EAB) are -43.78 dB and 3.4 GHz at ambient temperature, respectively. After oxidation at 600 °C, they exhibit much better EM wave absorption, where the RC_min decreases to -66.21 dB and EAB increases to 3.69 GHz in X-band. At a high temperature of 600 °C, they also possess excellent and promising EW wave absorption, for which EAB is 3.93 GHz, covering 93.6% range of X-band. In comparison to previous works on graphenes, either the EAB or the RC_min of these nanocomplexes is excellent at high-temperature oxidation. This novel nanomaterial technology may shed light on the downstream applications of graphenes in EM-wave-absorbing devices and smart structures worked in harsh environments.

Low Infrared Emissivity Coating Based on Graphene Surface-Modified Flaky Aluminum

A low infrared emissivity coating was prepared using graphene surface-modified flaky aluminum complex powders (rGO-FAl) as fillers. The flaky aluminum powders were coated with graphene through chemical bonding. Compared with pure flaky aluminum, the Vis-NIR diffuse reflectance of rGO-FAl complex powders was significantly decreased, which was beneficial to the low glossiness of the coating. After the modification, the glossiness at 60° of the coating with 40% (mass fraction) pigments decreased from 12.8 to 6.7, while the coating maintained low infrared emissivity (0.238~0.247) at a spectral range of 8–14 μm. In the electrochemical impedance spectroscopy (EIS) measurement, at the lowest frequency, the impedance of the Al-rGO test plate was at least two orders of magnitude greater than that of the control Al test plate, and the graphene layer significantly increased the bandwidth of the maximum phase angle, which indicates a good protective effect of the ultra-thin graphene layer on metal in a corrosive environment. The coating with 40% rGO-FAl complex powders can maintain its appearance after 500 h of salt spray corrosion testing. In contrast, the color of the coating with the original aluminum powders changed after only 300 h.

High-Temperature Stable and Metal-Free Electromagnetic Wave-Absorbing SiBCN Ceramics Derived from Carbon-Rich Hyperbranched Polyborosilazanes

High-temperature stable and metal-free siliconboron carbonitride ceramics with high electromagnetic (EM) wave-absorbing efficiency were achieved through the structural design and pyrolysis of carbon-rich hyperbranched polyborosilazane precursors with pendent phenyl groups. The introduction of benzene rings into the precursors dramatically changes the microstructure and the EM wave-absorbing property of ceramics. It reveals that the ceramics pyrolyzed from the benzene ring-containing preceramic precursors have a higher carbon content and a larger number of sp² carbons and generate crystalline carbons (graphitic carbons and tubular carbons) in situ, which lead to excellent EM wave-absorbing properties. The EM wave absorption efficiency and effective absorption bandwidth (EAB, reflection coefficient (RC) below -10 dB) can be tuned via annealing of the ceramics. The ceramics stable at 1320 °C exhibit their optimized EM wave-absorbing performance with a minimum RC (RC_min) of -71.80 dB and an EAB of 3.65 GHz (8.2-11.85 GHz). We believe that the research extends the design strategy of advanced EM wave-absorbing functional materials, which have great potential as promising absorbers in commercial or military applications.

High-Temperature Corrosion Behavior of SiBCN Fibers for Aerospace Applications

Amorphous SiBCN fibers possessing superior stability against oxidation have become a desirable candidate for high-temperature aerospace applications. Currently, investigations on the high-temperature corrosion behavior of these fibers for the application in high-heat engines are insufficient. Here, our polymer-derived SiBCN fibers were corroded at 1400 °C in air and simulated combustion environments. The fibers' structural evolution after corrosion in two different conditions and the potential mechanisms are investigated. It shows that the as-prepared SiBCN fibers mainly consist of amorphous networks of SiN₃C, SiN₄, B-N hexatomic rings, free carbon clusters, and BN₂C units. High-resolution transmission electron microscopy cross-section observations combined with energy-dispersive spectrometry/electron energy-loss spectroscopy analysis exhibit a trilayer structure with no detectable cracks for fibers after corrosion, including the outermost SiO₂ layer, the h-BN grain-contained interlayer, and the uncorroded fiber core. A high percentage of water vapor contained in the simulated combustion environment triggers the formation of abundant α-cristobalite nanoparticles dispersing in the amorphous SiO₂ phase, which are absent in fibers corroded in air. The formation of h-BN grains in the interlayer could be ascribed to the sacrificial effects of free carbon clusters, Si-C, and Si-N units reacting with oxygen diffusing inward, which protects h-BN grains formed by networks of B-N hexatomic rings in original SiBCN fibers. These results improve our understanding of the corrosion process of SiBCN fibers in a high-temperature oxygen- and water-rich atmosphere.

Preparation of novel polyamine-type chelating resin with hyperbranched structures and its adsorption performance

This paper explored the method of combining atom transfer radical polymerization (ATRP) technology and hyperbranched polymer principle to prepare the high capacity chelating resin. First, surface-initiated atom transfer radical polymerization (SI-ATRP) method was used to graft glycidyl methacrylate (GMA) on chloromethylated cross-linked styrene-divinylbenzene resin, and then the novel polyamine chelating resin with a kind of hyperbranched structure was prepared through the amination reaction between amino group of (2-aminoethyl) triamine and epoxy group in GMA. This resin had a selective effect on As(V) and Cr(VI) at a relatively low pH and can be used for the disposal of waste water containing As(V) and Cr(VI). It had a relatively strong adsorption effect on Cu(II), Pb(II), Cd(II) and Cr(III) and can be used for the disposal of heavy metal ion waste water. The finding was that, the adsorption capacity of resin on the studied heavy metal ions was higher than that of the chelating resin synthesized by traditional technology and also higher than that of the resin modified by ATRP technology and bifunctional chelator, indicating that the combination of ATRP and hyperbranched polymer concept is an effective method to prepare chelating resin with high capacity.

Facile synthesis, microstructure and photophysical properties of core-shell nanostructured (SiCN)/BN nanocomposites

Increasing structural complexity at nanoscale can permit superior control over photophysical properties in the precursor-derived semiconductors. We demonstrate here the synthesis of silicon carbonitride (SiCN)/boron nitride (BN) nanocomposites via a polymer precursor route wherein the cobalt polyamine complexes used as the catalyst, exhibiting novel composite structures and photophysical properties. High Resolution Transmission Electron Microscopy (HRTEM) analysis shows that the diameters of SiCN-BN core-shell nanocomposites and BN shells are 50‒400 nm and 5‒25 nm, respectively. BN nanosheets (BNNSs) are also observed with an average sheet size of 5‒15 nm. The photophysical properties of these nanocomposites are characterized using the UV-Vis and photoluminescence (PL) analyses. The as-produced composites have emission behavior including an emission lifetime of 2.5 ns (±20 ps) longer observed in BN doped SiCN than that seen for SiC nanoparticles. Our results suggest that the SiCN/BN nanocomposites act as semiconductor displaying superior width photoluminescence at wavelengths spanning the visible to near-infrared (NIR) spectral range (400‒700 nm), owing to the heterojunction of the interface between the SiC(N) nanowire core and the BN nanosheet shell.

Tunable room-temperature soft ferromagnetism in magnetoceramics of organometallic dendrimers

This article represents an introduction of new dendrimeric precursors to magnetic ceramics, and homometallic and heterometallic dendrimers with tunable magnetic properties.

Facile synthesis of core–shell carbon nanotubes@MnOOH nanocomposites with remarkable dielectric loss and electromagnetic shielding properties

Sodium dodecyl benzene sulfonate (SDBS) favors the formation of carbon nanotubes@MnOOH core–shell nanostructures with excellent shielding properties.

Hyperbranched polymers from A2 + B3 strategy: recent advances in description and control of fine topology

Recent advances in the fine topology regulation of hyperbranched polymers from an A₂ + B₃ strategy were presented from the perspectives of topology description and architecture control.

Disulfide bonds-containing amphiphilic conetworks with tunable reductive-cleavage

The disulfide bonds-containing amphiphilic conetworks were presented with tunable reduction-cleavage via click reaction of azide terminated poly(ε-caprolactone) and alkyne-terminated polyethylene glycol.

100% hyperbranched polymers via the acid-catalyzed Friedel–Crafts aromatic substitution reaction

A highly efficient and benign strategy to synthesize hyperbranched polymers with a degree of branching of 100% was presented via the Friedel–Crafts reaction.

Magnetic two-dimensional molecularly imprinted materials for the recognition and separation of proteins

We report a novel design of magnetic two-dimensional molecularly imprinted polymers on Fe₃O₄@GO for the high recognition and separation of proteins.

Synthesis and structural evolution of dual-boron-source-modified polysilazane derived SiBCN ceramics

A dual-boron-source approach is proposed to enrich the boron content of SiBCN ceramics through aminolysis and hydroboration reactions.

Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying

Carbon strongly impacts microstructure evolution, amorphization and nucleation of SiBCN ceramics revealing an intense relationship between chemistry and final structure.

Advanced Aromatic Polymers with Excellent Antiatomic Oxygen Performance Derived from Molecular Precursor Strategy and Copolymerization of Polyhedral Oligomeric Silsesquioxane

In this contribution, the advanced aromatic polymers with excellent antiatomic oxygen (AO) performance were designed and synthesized using molecular precursor strategy and copolymerization of polyhedral oligomeric silsesquioxane (POSS). A soluble poly(p-phenylene benzobisoxazole) (PBO) precursor, that is, TBS-PBO (tert-butyldimethylsilyl was denoted as TBS), was designed to overcome the poor solubility of PBO in organic solvents. Then the new copolymer of TBS-PBO-POSS was synthesized by the copolymerization of TBS-PBO and POSS, which possessed good solubility and film-forming ability in common organic solvents, such as N-methylpyrrolidone, N,N-dimethylacetamide, and dimethyl sulfoxide. More importantly, the TBS-PBO-POSS films exhibited outstanding antiatomic oxygen properties because of the incorporation of POSS monomers with cagelike structure into the main chain of copolymer, which drastically reduced the AO-induced erosion owing to the formation of the passivating silica layer on the surface of polymers. When the TBS-PBO-POSS films were exposed to AO effective fluences of 1.5495×10(20) atom cm(-2) (5 h) and 4.6486×10(20) atom cm(-2) (15 h), the relative mass loss was merely 0.19% and 0.41%, respectively. This work provides a new perspective and efficient strategy for the molecular design of aromatic heterocyclic polymers possessing excellent combination properties including processing convenience and antioxidative and mechanical properties, which can be employed as potential candidates to endure the aggressive environment encountered in low earth orbits.