Organization of water and atmospherically relevant ions and solutes: vibrational sum frequency spectroscopy at the vapor/liquid and liquid/solid interfaces

De Novo Design and Characterization of Amphiphilic Peptides with Basic Side Chains for Tailored Interfacial Chemistries

Lysine-leucine (LK) peptides have been used as model systems and platforms for 2D material design for decades. LK peptides are amphiphilic sequences designed to bind and fold at hydrophobic surfaces through hydrophobic leucine side chains and hydrophilic lysine side chains extending into the aqueous subphase. The hydrophobic periodicity of the sequence dictates the secondary structure at the interface. This robust design makes them ideal candidates for controlling interfacial chemistry. This study presents the de novo design and characterization of two novel peptides: LRα14 and LHα14, which substitute lysine with arginine and histidine, respectively, in the helical LKα14 sequence. This modification is intended to expand the LK peptide platform to a new basic interfacial chemistry. We explore the stability of the new LRα14 and LHα14 designs with respect to changes in pH and salt concentration in bulk solution and at the interface using circular dichroism (UV-CD) and vibrational sum-frequency generation spectroscopy, respectively. Notably, the structural stability of the peptides remains unaffected across a wide range of pH and ionic strength values. At the same time, the variation of side-chain chemistry leads to a wide spectrum of interfacial water structures. By extension of the LK platform to include arginine and histidine, this study broadens the toolbox for designing tailored interfacial chemistries with applications in material and biomedical sciences.

A review of ion scattering spectroscopy studies at liquid interfaces with noble gas ion projectiles

Ion scattering spectroscopy (ISS) is an analytical tool that provides direct structural, topographical, and atomic compositional information at interfaces when ions are used as projectiles. Since its development in 1967, ISS is commonly used to obtain quantitative information about solid interfaces. Over the last couple of decades, ISS has emerged as an important technique to probe liquid interfaces and their studies employing ISS has become not uncommon, more so with Neutral impact collision ion scattering spectroscopy (NICISS). Therefore, here the principle of ISS with a particular focus on NICISS and its data evaluation are summarised while reviewing some important studies at vapor-liquid interfaces that provide direct information for molecular orientation of liquids (including ionic liquids), composition and distribution of atoms (or solutes) and charges as a function of depth to gain vast variety of thermodynamical information. Employing ISS such information can be achieved with high depth resolution of ∼1-2 Å (depending on the nature of the experiment). These examples highlight the significance of ISS and show potential for its application for studies related to specific ion effects, atmospheric reaction in aerosol and sea water droplets, and even determining the fate of environmental pollutants like heavy metal ions and per-fluoroalkyl substances (PFAS). Furthermore, some limitations of ISS are also discussed relating to investigation of high-vapor pressure liquids and probing buried interfaces like liquid-liquid interfaces while presenting progresses made in probing solid-liquid interfaces.

Adsorption, Orientation, and Speciation of Amino Acids at Air-Aqueous Interfaces for the Direct Air Capture of CO2

Amino acids make up a promising family of molecules capable of direct air capture (DAC) of CO2 from the atmosphere. Under alkaline conditions, CO2 reacts with the anionic form of an amino acid to produce carbamates and deactivated zwitterionic amino acids. The presence of the various species of amino acids and reactive intermediates can have a significant effect on DAC chemistry, the role of which is poorly understood. In this study, all-atom molecular dynamics (MD) based computational simulations and vibrational sum frequency generation (vSFG) spectroscopy studies were conducted to understand the role of competitive interactions at the air-aqueous interface in the context of DAC. We find that the presence of potassium bicarbonate ions, in combination with the anionic and zwitterionic forms of amino acids, induces concentration and charge gradients at the interface, generating a layered molecular arrangement that changes under pre- and post-DAC conditions. In parallel, an enhancement in the surface activity of both anionic and zwitterionic forms of amino acids is observed, which is attributed to enhanced interfacial stability and favorable intermolecular interactions between the adsorbed amino acids in their anionic and zwitterionic forms. The collective influence of these competitive interactions, along with the resulting interfacial heterogeneity, may in turn affect subsequent capture reactions and associated rates. These effects underscore the need to consider dynamic changes in interfacial chemical makeup to enhance DAC efficiency and to develop successful negative emission and storage technologies.

The Effects of External Interfaces on Hydrophobic Interactions I: Smooth Surface

External interfaces, such as the air-water and solid-liquid interfaces, are ubiquitous in nature. Hydrophobic interactions are considered the fundamental driving force in many physical and chemical processes occurring in aqueous solutions. It is important to understand the effects of external interfaces on hydrophobic interactions. According to the structural studies on liquid water and the air-water interface, the external interface primarily affects the structure of the topmost water layer (interfacial water). Therefore, an external interface may affect hydrophobic interactions. The effects of interfaces on hydrophobicity are related not only to surface molecular polarity but also to the geometric characteristics of the external interface, such as shape and surface roughness. This study is devoted to understanding the effects of a smooth interface on hydrophobicity. Due to hydrophobic interactions, the solutes tend to accumulate at external interfaces to maximize the hydrogen bonding of water. Additionally, these can be demonstrated by the calculated potential mean forces (PMFs) using molecular dynamic (MD) simulations.

Agglomeration Drives the Reversed Fractionation of Aqueous Carbonate and Bicarbonate at the Air-Water Interface

In the course of our investigations of the adsorption of ions to the air-water interface, we previously reported the surprising result that doubly charged carbonate anions exhibit a stronger surface affinity than singly charged bicarbonate anions. In contrast to monovalent, weakly hydrated anions, which generally show enhanced concentrations in the interfacial region, multivalent (and strongly hydrated) anions are expected to show a much weaker surface propensity. In the present work, we use resonantly enhanced deep-UV second-harmonic generation spectroscopy to measure the Gibbs free energy of adsorption of both carbonate (CO32-) and bicarbonate (HCO3-) anions to the air-water interface. Contrasting the predictions of classical electrostatic theory and in support of our previous findings from X-ray photoelectron spectroscopy, we find that carbonate anions do indeed exhibit much stronger surface affinity than do the bicarbonate anions. Extensive computer simulations reveal that strong ion pairing of CO32- with the Na+ countercation in the interfacial region results in the formation of near-neutral agglomerate clusters, consistent with a theory of interfacial ion adsorption based on hydration free energy and capillary waves. Simulated X-ray photoelectron spectra predict a 1 eV shift in the carbonate spectra compared to that of bicarbonate, further confirming our experiments. These findings not only advance our fundamental understanding of ion adsorption chemistry but also impact important practical processes such as ocean acidification, sea-spray aerosol chemistry, and mammalian respiration physiology.

Convenient Confinement: Interplay of Solution Conditions and Graphene Oxide Film Structure on Rare Earth Separations

Graphene oxide (GO) membranes are excellent candidates for a range of separation applications, including rare earth segregation and radionuclide decontamination. Understanding nanoscale water and ion behavior near interfacial GO is critical for groundbreaking membrane advances, including improved selectivity and permeability. We experimentally examine the impact of solution conditions on water and lanthanide interactions with interfacial GO films and connect these results to GO membrane performance. The investigation of the confined films at the air-water interface with a combination of surface-specific spectroscopy and X-ray scattering techniques allows us to understand water and ion behaviors separately. Sum frequency generation spectroscopy reveals a dramatic change in interfacial water organization because of graphene oxide film deprotonation. Interfacial X-ray fluorescence measurements show a 17× increase in adsorbed lanthanide to the GO film from subphase pH 3 to pH 9. Liquid surface X-ray reflectivity data show an additional 2.7 e^- per Ų for GO films at pH 9 versus pH 3 as well. These results are connected to GO membrane performance, which show increased selectivity and decreased flux for membranes filtering pH 9 solutions. We posit insoluble lanthanide hydroxides form at higher pHs. Taken together, these results highlight the importance of interfacial experiments on model GO systems.

On the mechanisms of ion adsorption to aqueous interfaces: air-water vs. oil-water

The adsorption of ions to water-hydrophobe interfaces influences a wide range of phenomena, including chemical reaction rates, ion transport across biological membranes, and electrochemical and many catalytic processes; hence, developing a detailed understanding of the behavior of ions at water-hydrophobe interfaces is of central interest. Here, we characterize the adsorption of the chaotropic thiocyanate anion (SCN^-) to two prototypical liquid hydrophobic surfaces, water-toluene and water-decane, by surface-sensitive nonlinear spectroscopy and compare the results against our previous studies of SCN^- adsorption to the air-water interface. For these systems, we observe no spectral shift in the charge transfer to solvent spectrum of SCN^-, and the Gibb's free energies of adsorption for these three different interfaces all agree within error. We employed molecular dynamics simulations to develop a molecular-level understanding of the adsorption mechanism and found that the adsorption for SCN^- to both water-toluene and water-decane interfaces is driven by an increase in entropy, with very little enthalpic contribution. This is a qualitatively different mechanism than reported for SCN^- adsorption to the air-water and graphene-water interfaces, wherein a favorable enthalpy change was the main driving force, against an unfavorable entropy change.

Investigation of Water Evaporation Process at Air/Water Interface using Hofmeister Ions

Evaporation is an interfacial phenomenon in which a water molecule breaks the intermolecular hydrogen (H-) bonds and enters the vapor phase. However, a detailed demonstration of the role of interfacial water structure in the evaporation process is still lacking. Here, we purposefully perturb the H-bonding environment at the air/water interface by introducing kosmotropic (HPO₄^-2, SO₄^-2, and CO₃^-2) and chaotropic ions (NO₃^- and I^-) to determine their influence on the evaporation process. Using time-resolved interferometry on aqueous salt droplets, we found that kosmotropes reduce evaporation, whereas chaotropes accelerate the evaporation process, following the Hofmeister series: HPO₄^-2 < SO₄^-2 < CO₃^-2 < Cl^- < NO₃^- < I^-. To extract deeper molecular-level insights into the observed Hofmeister trend in the evaporation rates, we investigated the air/water interface in the presence of ions using surface-specific sum frequency generation (SFG) vibrational spectroscopy. The SFG vibrational spectra reveal the significant impact of ions on the strength of the H-bonding environment and the orientation of free OH oscillators from ∼36.2 to 48.4° at the air/water interface, where both the effects follow the Hofmeister series. It is established that the slow evaporating water molecules experience a strong H-bonding environment with free OH oscillators tilted away from the surface normal in the presence of kosmotropes. In contrast, the fast evaporating water molecules experience a weak H-bonding environment with free OH oscillators tilted toward the surface normal in the presence of chaotropes at the air/water interface. Our experimental outcomes showcase the complex bonding environment of interfacial water molecules and their decisive role in the evaporation process.

Rapid Water Dynamics Structures the OH-Stretching Spectra of Solitary Water in Ionic Liquids and Dipolar Solvents

In a recent study [ J. Phys. Chem. B 126, 4584 (2022)] we used infrared spectroscopy to investigate the solvation and dynamics of solitary water in ionic liquids and dipolar solvents. Complex shapes observed for water OH-stretching bands common to all high-polarity solvents were assigned to water in several solvation states. In the present study, classical molecular dynamics simulations of a single water molecule in four ionic liquids and three dipolar solvents were used to test and refine this interpretation. Consistent with past assignments, simulations show solitary water usually donates two hydrogen bonds to distinct solvent molecules. Such symmetrically solvated water produces the primary pair of peaks identified in the OH spectra of water in nearly all solvents. We had further proposed that additional features flanking this main peak are due to asymmetric solvation states, states in which only one OH group makes a hydrogen bond to solvent. Such states were found in significant concentrations in all of the systems simulated. Simulations of the OH stretching spectra using a semiclassical description and the vibrational map developed by Auer and Skinner [ J. Chem. Phys. 128, 224511 (2008)] provided semi-quantitative agreement with experiment. Analysis of species-specific spectra also confirmed assignment of the additional features in the experimental spectra to asymmetrically solvated water. The simulations also showed that rapid water motions cause a marked motional narrowing compared to the inhomogeneous limit, and that this narrowing is largely responsible for making the additional features due to minority solvation states manifest in the spectra.

Liquid-Solid Interfaces under Dynamic Shear Flow: Recent Insights into the Interfacial Slip

The development of micro/nanofluidic techniques has recently revived interest in dynamic shear flow at liquid-solid interfaces. When the nature of the liquid-solid boundaries was revisited, the slip of the fluids relative to the solid wall was predicted theoretically and confirmed experimentally. This indicates that the molecular-level structures of the liquid-solid interfaces will be influenced by the liquid flow over certain temporal and spatial criteria. However, the fluid flow at the boundary layer still cannot be precisely predicted and effectively controlled, somehow limiting its practical applications. Here, we summarize the recent advances for the microscopic structures at the liquid-solid interfaces upon shear flow. Special attention was given to a second-order nonlinear optical technique, sum frequency generation vibrational spectroscopy, which is a powerful tool for exploring the molecular-level structures and structural dynamics at the liquid-solid interfaces and offering new insights into the molecular mechanisms of the fluid slip at the interfaces. Moreover, we discuss the possible approaches for controlling the interfacial slip at the molecular level and highlight the current challenges and opportunities. Although the theoretical framework of the slip at the liquid-solid interfaces is still incomplete, we hope that this Perspective will complement and enhance our understanding of various interfacial properties and phenomena with respect to practical non-equilibrium dynamic processes happening at the interfaces.

Characterizing Anion Adsorption to Aqueous Interfaces: Toluene-Water versus Air-Water

We continue our investigation of the behavior of simple ions at aqueous interfaces, employing the combination of two surface-sensitive nonlinear spectroscopy tools, broadband deep UV electronic sum-frequency generation and UV second harmonic generation, to characterize the adsorption of thiocyanate to the interface of water with toluene─a prototypical hydrophobe. We find that both the interfacial spectrum and the Gibbs free energy of adsorption closely match results previously reported for the air-water interface. We observe no relative spectral shift in the higher-energy CTTS transition of thiocyanate, implying similar solvation environments for the two interfaces. Similarly, the Gibbs free energies of adsorption agree within error; however, we expect the respective enthalpic and entropic contributions to differ between the two interfaces, similar to our earlier findings for the air-water versus graphene-water interfaces. Further experiments and theoretical modeling are necessary to quantify the mechanistic differences.

Electrification at water-hydrophobe interfaces

The mechanisms leading to the electrification of water when it comes in contact with hydrophobic surfaces remains a research frontier in chemical science. A clear understanding of these mechanisms could, for instance, aid the rational design of triboelectric generators and micro- and nano-fluidic devices. Here, we investigate the origins of the excess positive charges incurred on water droplets that are dispensed from capillaries made of polypropylene, perfluorodecyltrichlorosilane-coated glass, and polytetrafluoroethylene. Results demonstrate that the magnitude and sign of electrical charges vary depending on: the hydrophobicity/hydrophilicity of the capillary; the presence/absence of a water reservoir inside the capillary; the chemical and physical properties of aqueous solutions such as pH, ionic strength, dielectric constant and dissolved CO2 content; and environmental conditions such as relative humidity. Based on these results, we deduce that common hydrophobic materials possess surface-bound negative charge. Thus, when these surfaces are submerged in water, hydrated cations form an electrical double layer. Furthermore, we demonstrate that the primary role of hydrophobicity is to facilitate water-substrate separation without leaving a significant amount of liquid behind. These results advance the fundamental understanding of water-hydrophobe interfaces and should translate into superior materials and technologies for energy transduction, electrowetting, and separation processes, among others.

Structure and sum-frequency generation spectra of water on uncharged Q4 silica surfaces: a molecular dynamics study

The structural characteristics and sum-frequency generation (SFG) spectra of water near neutral Q₄ silica surfaces were investigated by molecular dynamics simulations. The interactions of water molecules with atoms of the solid were described by different potential models, in particular by the CLAYFF [Cygan et al., J. Phys. Chem. B, 2004, 108, 1255] and INTERFACE [Heinz et al. Langmuir, 2013, 29, 1754] force fields. The calculations of the contact angle of water have shown that the silica surface modeled with CLAYFF behaves as macroscopically hydrophilic, in contrast to the surface described with the INTERFACE model. The hydrophilicity of CLAYFF stems from too attractive electrostatic surface-water interactions. Regardless of the surface's affinity for water, the aqueous phase has a layered structure in the direction perpendicular to the surface with density fluctuations decaying within a distance of 10 Å from the surface. The orientational ordering of H₂O molecules was found to be more short-range than the density fluctuations, especially for the hydrophobic surfaces. Modeling the SFG spectra has shown that the spectra of all studied hydrophobic silica-water interfaces are similar and have features in common with the spectrum of the water-vapor interface. The spectra fairly agree with experimental results obtained for the silica-water interface at low pH conditions [Myalitsin et al., J. Phys. Chem. C, 2016, 120, 9357]. The spectral response for the hydrophobic interface was computed to primarily arise from the topmost molecules of the first layer of interfacial water. In contrast, the SFG signal from the hydrophilic silica-water interface is accumulated over a greater distance extending for several water layers due to more long-range perturbation of the structure by the surface.

A General Approach To Combine the Advantages of Collinear and Noncollinear Spectrometer Designs in Phase-Resolved Second-Order Nonlinear Spectroscopy

Recent years have seen a huge progress in the development of phase-sensitive second-order laser spectroscopy which has proven to be a very powerful tool for the investigation of interfaces. In these techniques, the nonlinear interaction between two short laser pulses and the sample yields a signal pulse which subsequently interferes with a third pulse, the so-called local oscillator. To obtain accurate phase information, the relative phases between the signal and local oscillator pulses must be stabilized and their timings precisely controlled. Despite much progress made, fulfilling both requirements remains a formidable experimental challenge. The two common approaches employ different beam geometries which each yields its particular advantages and deficiencies. While noncollinear spectrometers allow for a relatively simple timing control they typically yield poor phase stability and require a challenging alignment. Collinear approaches in contrast come with a simplified alignment and improved phase stability but typically suffer from a highly limited timing control. In this contribution we present a general experimental solution which allows for combining the advantages of both approaches while being compatible with most of the common spectrometer types. On the basis of a collinear geometry, we exploit different selected polarization states of the light pulses in well-defined places in the spectrometer to achieve a precise timing control. The combination of this technique with a balanced detection scheme allows for the acquisition of highly accurate phase-resolved nonlinear spectra without any loss in experimental flexibility. In fact, we show that the implementation of this technique allows us to employ advanced pulse timing schemes inside the spectrometer, which can be used to suppress nonlinear background signals and extend the capabilities of our spectrometer to measure phase-resolved sum frequency spectra of interfaces in a liquid cell.

Gate-Controlled Sum-Frequency Vibrational Spectroscopy for Probing Charged Oxide/Water Interfaces

The rich chemistry of oxide/aqueous interfaces originates from the interfacial layer formed by surface charges and adjoining water molecules. Yet not much is clear about such layers, because they are difficult to access, and measurements unavoidably collect signals from the diffuse layer nearby, which is perturbed by the surface potential extending into the bulk water. Here we show that gating of a semiconductor/oxide/water junction can effectively vary the surface charge density at the oxide/water interface but keep the surface potential low and barely varying, allowing effective removal of the diffuse layer contribution. With sum-frequency vibrational spectroscopy on a silicon/silica/deionized-water model junction, the variation of the bonded layer water structure in response to surface charging can be readily detected. This new scheme is generally applicable to all oxide/water interfaces, providing opportunities for future investigations at a deeper molecular level.

Quantifying Double-Layer Potentials at Liquid-Gas Interfaces from Vibrational Sum-Frequency Generation

Vibrational sum-frequency generation (SFG) spectroscopy is demonstrated as a fast method to quantify variations of the electric double-layer potential ϕ₀ at liquid-gas interfaces. For this, mixed solutions of nonionic tetraethyleneglycol-monodecylether (C₁₀E₄) and cationic hexadecyltrimethylammonium bromide (C₁₆TAB) surfactants were investigated using SFG spectroscopy and a thin-film pressure balance (TFPB). Derjaguin-Landau-Verwey-Overbeek analysis of disjoining pressure isotherms obtained with the TFPB technique provides complementary information on ϕ₀, which we apply to validate the results from SFG spectroscopy. By using a single ϕ₀ value, we can disentangle χ⁽²⁾ and χ⁽³⁾ contributions to the O-H stretching modes of interfacial water molecules in the SFG spectra. Having established the latter, we show that unknown double-layer potentials at the liquid-gas interface from solutions with different C₁₆TAB/C₁₀E₄ mixing ratios can be obtained from an analysis of SFG spectra and are in excellent agreement with the complementary results from the TFPB technique.

Specific Ion Effects on an Oligopeptide: Bidentate Binding Matters for the Guanidinium Cation

Ion-protein interactions are important for protein function, yet challenging to rationalize owing to the multitude of possible ion-protein interactions. To explore specific ion effects on protein binding sites, we investigate the interaction of different salts with the zwitterionic peptide triglycine in solution. Dielectric spectroscopy shows that salts affect the peptide's reorientational dynamics, with a more pronounced effect for denaturing cations (Li⁺ , guanidinium (Gdm⁺ )) and anions (I^- , SCN^- ) than for weakly denaturing ones (K⁺ , Cl^- ). The effects of Gdm⁺ and Li⁺ were found to be comparable. Molecular dynamics simulations confirm the enhanced binding of Gdm⁺ and Li⁺ to triglycine, yet with a different binding geometry: While Li⁺ predominantly binds to the C-terminal carboxylate group, bidentate binding to the terminus and the nearest amide is particularly important for Gdm⁺ . This bidentate binding markedly affects peptide conformation, and may help to explain the high denaturation activity of Gdm⁺ salts.

The chemical reactions in electrosprays of water do not always correspond to those at the pristine air-water interface

The recent application of electrosprays to characterize the air-water interface, along with the reports on dramatically accelerated chemical reactions in aqueous electrosprays, have sparked a broad interest. Herein, we report on complementary laboratory and in silico experiments tracking the oligomerization of isoprene, an important biogenic gas, in electrosprays and isoprene-water emulsions to differentiate the contributions of interfacial effects from those of high voltages leading to charge-separation and concentration of reactants in the electrosprays. To this end, we employed electrospray ionization mass spectrometry, proton nuclear magnetic resonance, ab initio calculations and molecular dynamics simulations. We found that the oligomerization of isoprene in aqueous electrosprays involved minimally hydrated and highly reactive hydronium ions. Those conditions, however, are non-existent at pristine air-water interfaces and oil-water emulsions under normal temperature and pressure. Thus, electrosprays should be complemented with surface-specific platforms and theoretical methods to reliably investigate chemistries at the pristine air-water interface.

Isolating the Isomeric Hydrogen Bonding Signatures of the Cyanide-Water Complex by Cryogenic Ion Trap Vibrational Spectroscopy

The vibrational spectroscopy of the cyanide-water complex and its fully deuterated isotopologue is studied in the spectral range from 800 to 3800 cm^-1. Infrared/infrared double-resonance population labeling spectroscopy of the cryogenically cooled, messenger-tagged complexes isolates the spectral signature of the two quasi-isoenergetic, singly hydrogen-bonded isomers HOH···NC^- and HOH···CN^-. The infrared photodissociation spectra are assigned based on a comparison to simulated anharmonic spectra. Infrared multiple photon dissociation spectra in the temperature range from 6 to 300 K confirm the stability of the two isomers at lower temperatures and provide evidence for a considerably more dynamic structure, also involving doubly hydrogen-bonded configurations, at higher internal energies. The observed red shifts Δν_OH of the hydrogen-bonded O-H stretches, 671 cm^-1 (HOH···NC^-) and 812 cm^-1 (HOH···CN^-), confirm the universal correlation of Δν_OH with the corresponding proton affinities.

Structural and electrostatic effects at the surfaces of size- and charge-selected aqueous nanodrops

The effects of ion charge, polarity and size on the surface morphology of size-selected aqueous nanodrops containing a single ion and up to 550 water molecules are investigated with infrared photodissociation (IRPD) spectroscopy and theory.

The effects of ion charge, polarity and size on the surface morphology of size-selected aqueous nanodrops containing a single ion and up to 550 water molecules are investigated with infrared photodissociation (IRPD) spectroscopy and theory. IRPD spectra of M(H₂O)_n where M = La³⁺, Ca²⁺, Na⁺, Li⁺, I^–, SO₄^2– and supporting molecular dynamics simulations indicate that strong interactions between multiply charged ions and water molecules can disrupt optimal hydrogen bonding (H-bonding) at the nanodrop surface. The IRPD spectra also reveal that “free” OH stretching frequencies of surface-bound water molecules are highly sensitive to the ion's identity and the OH bond's local H-bond environment. The measured frequency shifts are qualitatively reproduced by a computationally inexpensive point-charge model that shows the frequency shifts are consistent with a Stark shift from the ion's electric field. For multiply charged cations, pronounced Stark shifting is observed for clusters containing ∼100 or fewer water molecules. This is attributed to ion-induced solvent patterning that extends to the nanodrop surface, and serves as a spectroscopic signature for a cation's ability to influence the H-bond network of water located remotely from the ion. The Stark shifts measured for the larger nanodrops are extrapolated to infinite dilution to obtain the free OH stretching frequency of a surface-bound water molecule at the bulk air–water interface (3696.5–3701.0 cm^–1), well within the relatively wide range of values obtained from SFG measurements. These cluster measurements also indicate that surface curvature effects can influence the free OH stretching frequency, and that even nanodrops without an ion have a surface potential that depends on cluster size.

Electrochemistry-mass spectrometry for mechanism study of oxygen reduction at water/oil interface

Electrochemistry methods have been widely employed in the development of renewable energy, and involved in various processes, e.g. water splitting and oxygen reduction. Remarkable progress notwithstanding, there are still many challenges in further optimization of catalysts to achieve high performance. For this purpose, an in-depth understanding of reaction mechanism is needed. In this study, an electrochemistry-mass spectrometry method based on a Y-shaped dual-channel microchip as electrochemical cell and ionization device was demonstrated. Combined solutions of aqueous phase and oil phase were introduced into mass spectrometer directly when electrochemical reactions were happening to study the reduction of oxygen by decamethylferrocene or tetrathiafulvalene under the catalysis of a metal-free porphyrin, tetraphenylporphyrin, at water/1,2-dichloroethane interfaces. Monoprotonated and diprotonated tetraphenylporphyrin were detected by mass spectrometer, confirming the previously proposed mechanism of the oxygen reduction reaction. This work offers a new approach to study electrochemical reactions at liquid-liquid interface.

Introductory lecture: atmospheric chemistry in the Anthropocene

The term “Anthropocene” was coined by Professor Paul Crutzen in 2000 to describe an unprecedented era in which anthropogenic activities are impacting planet Earth on a global scale. Greatly increased emissions into the atmosphere, reflecting the advent of the Industrial Revolution, have caused significant changes in both the lower and upper atmosphere. Atmospheric reactions of the anthropogenic emissions and of those with biogenic compounds have significant impacts on human health, visibility, climate and weather. Two activities that have had particularly large impacts on the troposphere are fossil fuel combustion and agriculture, both associated with a burgeoning population. Emissions are also changing due to alterations in land use. This paper describes some of the tropospheric chemistry associated with the Anthropocene, with emphasis on areas having large uncertainties. These include heterogeneous chemistry such as those of oxides of nitrogen and the neonicotinoid pesticides, reactions at liquid interfaces, organic oxidations and particle formation, the role of sulfur compounds in the Anthropocene and biogenic–anthropogenic interactions. A clear and quantitative understanding of the connections between emissions, reactions, deposition and atmospheric composition is central to developing appropriate cost-effective strategies for minimizing the impacts of anthropogenic activities. The evolving nature of emissions in the Anthropocene places atmospheric chemistry at the fulcrum of determining human health and welfare in the future.

DMSO induces dehydration near lipid membrane surfaces

Dimethyl sulfoxide (DMSO) has been broadly used in biology as a cosolvent, a cryoprotectant, and an enhancer of membrane permeability, leading to the general assumption that DMSO-induced structural changes in cell membranes and their hydration water play important functional roles. Although the effects of DMSO on the membrane structure and the headgroup dehydration have been extensively studied, the mechanism by which DMSO invokes its effect on lipid membranes and the direct role of water in this process are unresolved. By directly probing the translational water diffusivity near unconfined lipid vesicle surfaces, the lipid headgroup mobility, and the repeat distances in multilamellar vesicles, we found that DMSO exclusively weakens the surface water network near the lipid membrane at a bulk DMSO mole fraction (XDMSO) of <0.1, regardless of the lipid composition and the lipid phase. Specifically, DMSO was found to effectively destabilize the hydration water structure at the lipid membrane surface at XDMSO <0.1, lower the energetic barrier to dehydrate this surface water, whose displacement otherwise requires a higher activation energy, consequently yielding compressed interbilayer distances in multilamellar vesicles at equilibrium with unaltered bilayer thicknesses. At XDMSO >0.1, DMSO enters the lipid interface and restricts the lipid headgroup motion. We postulate that DMSO acts as an efficient cryoprotectant even at low concentrations by exclusively disrupting the water network near the lipid membrane surface, weakening the cohesion between water and adhesion of water to the lipid headgroups, and so mitigating the stress induced by the volume change of water during freeze-thaw.

Water orientation and hydrogen-bond structure at the fluorite/water interface

Water in contact with mineral interfaces is important for a variety of different processes. Here, we present a combined theoretical/experimental study which provides a quantitative, molecular-level understanding of the ubiquitous and important CaF2/water interface. Our results show that, at low pH, the surface is positively charged, causing a substantial degree of water ordering. The surface charge originates primarily from the dissolution of fluoride ions, rather than from adsorption of protons to the surface. At high pH we observe the presence of Ca-OH species pointing into the water. These OH groups interact remarkably weakly with the surrounding water, and are responsible for the "free OH" signature in the VSFG spectrum, which can be explained from local electronic structure effects. The quantification of the surface termination, near-surface ion distribution and water arrangement is enabled by a combination of advanced phase-resolved Vibrational Sum Frequency Generation spectra of CaF2/water interfaces and state-of-the-art ab initio molecular dynamics simulations which include electronic structure effects.

Oppositely Charged Ions at Water-Air and Water-Oil Interfaces: Contrasting the Molecular Picture with Thermodynamics

The surface-active ions tetraphenylarsonium (Ph4As(+)) and tetraphenylboron (Ph4B(-)) have a similar structure but opposite charge. At the solution-air interface, the two ions affect the surface tension in an identical manner, yet sum-frequency generation (SFG) spectra reveal an enhanced surface propensity for Ph4As(+) compared with Ph4B(-), in addition to opposite alignment of interfacial water molecules. At the water-oil interface, the interfacial tension is 7 mN/m lower for Ph4As(+) than for Ph4B(-) salts, but this can be fully accounted for by the different bulk solubility of these ions in the hydrophobic phase, rather than inherently different surface activities. The different solubility can be accounted for by differences in electronic structure, as evidenced by quantum chemical calculations and NMR studies. Our results show that the surface propensity concluded from SFG spectroscopy does not necessarily correlate with interfacial adsorption concluded from thermodynamic measurements.

Two-dimensional sum-frequency generation (2D SFG) spectroscopy: summary of principles and its application to amyloid fiber monolayers

By adding a mid-infrared pulse shaper to a sum-frequency generation (SFG) spectrometer, we have built a 2D SFG spectrometer capable of measuring spectra analogous to 2D IR spectra but with monolayer sensitivity and SFG selection rules. In this paper, we describe the experimental apparatus and provide an introduction to 2D SFG spectroscopy to help the reader interpret 2D SFG spectra. The main aim of this manuscript is to report 2D SFG spectra of the amyloid forming peptide FGAIL. FGAIL is a critical segment of the human islet amyloid polypeptide (hIAPP or amylin) that aggregates in people with type 2 diabetes. FGAIL is catalyzed into amyloid fibers by many types of surfaces. Here, we study the structure of FGAIL upon deposition onto a gold surface covered with a self-assembled monolayer of methyl-4-mercaptobenzoate (MMB) that produces an ester coating. FGAIL deposited on bare gold does not form ordered layers. The measured 2D SFG spectrum is consistent with amyloid fiber formation, exhibiting both the parallel (a+) and perpendicular (a-) symmetry modes associated with amyloid β-sheets. Cross peaks are observed between the ester stretches of the coating and the FGAIL peptides. Simulations are presented for two possible structures of FGAIL amyloid β-sheets that illustrate the sensitivity of the 2D SFG spectra to structure and orientation. These results provide some of the first molecular insights into surface catalyzed amyloid fiber structure.

Stabilized phase detection of heterodyne sum frequency generation for interfacial studies

We present a collinear-geometry heterodyne sum frequency generation (HD-SFG) method for interfacial studies. The HD detection is based on a collinear SFG configuration, in which picosecond visible and femtosecond IR beams are used to first produce a strong local oscillator and then to generate weak SFG signals from an interface. A time-delay compensator, consisting of an MgF2 window, is placed before the sample to introduce the time delay between the local oscillator and the interfacial SFG signals for spectral interferometry. Our HD-SFG method exhibits advantages of long-time phase stability. It is not sensitive to sample heights, does not require reflection correction, and is easy to implement.

Characterization of the mobility and reactivity of water molecules on TiO2 nanoparticles by 1H solid-state nuclear magnetic resonance

Understanding interfacial water behavior is essential to improving our understanding of the surface chemistry and interfacial properties of nanomaterials. Here using 1H solid-state nuclear magnetic resonance (1H SSNMR), we successfully monitored ligand exchange reaction between oleylamine (OLA) and adsorbed water on titanium dioxide nanoparticles (TiO2 NPs). Three different types of interfacial waters with different reactivities were distinguished. The mobility of the adsorbed water molecules was characterized by dipolar filtered 1H SSNMR. Our experimental results demonstrate that the adsorbed water can be categorized into three different layers: (i) rigid water species with restricted mobility closest to the surface of TiO2 NPs, (ii) less mobile water species weakly confined on TiO2 NPs, and (iii) water molecules with high mobility. Water in the third layer could be replaced by OLA, while water in the first and second layers remained intact. The finding that the interfacial water with the highest mobility has the strongest reactivity has guiding significance for tailoring the hydrophilic and hydrophobic properties of TiO2 NPs.