Altering molecular photophysics by merging organic and inorganic chromophores

Luminescent Platinum Complexes with π-Extended Aryl Acetylide Ligands Supported by Isocyanides or Acyclic Diaminocarbenes

In this work, we present a series of luminescent platinum acetylide complexes with acetylides that are electronically modified and/or π-extended. Six isocyanide-supported complexes with the general formula cis-[Pt(CNAr)2(C≡CR)2] and six acyclic diaminocarbene (ADC) complexes of the form trans-[Pt(ADC)2(C≡CR)2], all using the same five acetylide ligands, are described. The compounds are characterized by multinuclear NMR, FT-IR, and single-crystal X-ray diffraction. In most cases, the phosphorescence arises from an acetylide-centered 3(π → π*) excited state, although in one of the isocyanide compounds there is evidence for a charge-transfer excited state. The photoluminescence wavelength depends strongly on the substitution pattern and extent of the π conjugation on the acetylide, with maxima spanning the range of ca. 460-540 nm. Most photoluminescence lifetimes are long, beyond 50 μs, and quantum yields are low to moderate, 0.043-0.27. The photoluminescence quantum yields and lifetimes in these compounds do not systematically improve in the ADC complexes compared to the isocyanide versions, suggesting the neutral ligand σ-donor character does not play a large role in the excited-state dynamics when the triplet excited state is delocalized over a large π system.

A stronger acceptor decreases the rates of charge transfer: ultrafast dynamics and on/off switching of charge separation in organometallic donor-bridge-acceptor systems

To unravel the role of driving force and structural changes in directing the photoinduced pathways in donor-bridge-acceptor (DBA) systems, we compared the ultrafast dynamics in novel DBAs which share a phenothiazine (PTZ) electron donor and a Pt(ii) trans-acetylide bridge (-C[triple bond, length as m-dash]C-Pt-C[triple bond, length as m-dash]C-), but bear different acceptors conjugated into the bridge (naphthalene-diimide, NDI; or naphthalene-monoimide, NAP). The excited state dynamics were elucidated by transient absorption, time-resolved infrared (TRIR, directly following electron density changes on the bridge/acceptor), and broadband fluorescence-upconversion (FLUP, directly following sub-picosecond intersystem crossing) spectroscopies, supported by TDDFT calculations. Direct conjugation of a strong acceptor into the bridge leads to switching of the lowest excited state from the intraligand 3IL state to the desired charge-separated 3CSS state. We observe two surprising effects of an increased strength of the acceptor in NDI vs. NAP: a ca. 70-fold slow-down of the 3CSS formation-(971 ps)-1vs. (14 ps)-1, and a longer lifetime of the 3CSS (5.9 vs. 1 ns); these are attributed to differences in the driving force ΔGet, and to distance dependence. The 100-fold increase in the rate of intersystem crossing-to sub-500 fs-by the stronger acceptor highlights the role of delocalisation across the heavy-atom containing bridge in this process. The close proximity of several excited states allows one to control the yield of 3CSS from ∼100% to 0% by solvent polarity. The new DBAs offer a versatile platform for investigating the role of bridge vibrations as a tool to control excited state dynamics.

Exploring Differences in Lanthanide Excited State Reactivity Using a Simple Example: The Photophysics of La and Ce Thenoyltrifluoroacetone Complexes

A series of four lanthanide thenoyltrifluoroacetone (TTA) complexes consisting of two f0 (La3+ and Ce4+) and two f1 (Ce3+) complexes was examined using steady-state and time-resolved spectroscopic techniques. The wide range of spectroscopic techniques presented herein have enabled us to discern the nature of the excited states (charge transfer, CT vs ligand localized, LL) as well as construct a Jablonski diagram for detailing the excited state reactivity within the series of molecules. The wavelength and excitation power dependence for these series of complexes are the first direct verification for the presence of simultaneous competing, noninteracting CT and LL excited states. Additionally, a computational framework is described that can be used to support spectroscopic assignments as a guide for future studies. Finally, the relationship between the obtained photophysics and possible photochemical separation mechanisms is described.

Triplet quenching pathway control with molecular dyads enables the identification of a highly oxidizing annihilator class

Metal complex - arene dyads typically act as more potent triplet energy donors compared to their parent metal complexes, which is frequently exploited for increasing the efficiencies of energy transfer applications. Using unexplored dicationic phosphonium-bridged ladder stilbenes (P-X2+) as quenchers, we exclusively observed photoinduced electron transfer photochemistry with commercial organic photosensitizers and photoactive metal complexes. In contrast, the corresponding pyrene dyads of the tested ruthenium complexes with the very same metal complex units efficiently sensitize the P-X2+ triplets. The long-lived and comparatively redox-inert pyrene donor triplet in the dyads thus provides an efficient access to acceptor triplet states that are otherwise very tricky to obtain. This dyad-enabled control over the quenching pathway allowed us to explore the P-X2+ photochemistry in detail using laser flash photolysis. The P-X2+ triplet undergoes annihilation producing the corresponding excited singlet, which is an extremely strong oxidant (+2.3 V vs. NHE) as demonstrated by halide quenching experiments. This behavior was observed for three P2+ derivatives allowing us to add a novel basic structure to the very limited number of annihilators for sensitized triplet-triplet annihilation in neat water.

The three kingdoms-Photoinduced electron transfer cascades controlled by electronic couplings

Excited states are the key species in photocatalysis, while the critical parameters that govern their applications are (i) excitation energy, (ii) accessibility, and (iii) lifetime. However, in molecular transition metal-based photosensitizers, there is a design tension between the creation of long-lived excited (triplet), e.g., metal-to-ligand charge transfer (3MLCT) states and the population of such states. Long-lived triplet states have low spin-orbit coupling (SOC) and hence their population is low. Thus, a long-lived triplet state can be populated but inefficiently. If the SOC is increased, the triplet state population efficiency is improved-coming at the cost of decreasing the lifetime. A promising strategy to isolate the triplet excited state away from the metal after intersystem crossing (ISC) involves the combination of transition metal complex and an organic donor/acceptor group. Here, we elucidate the excited state branching processes in a series of Ru(II)-terpyridyl push-pull triads by quantum chemical simulations. Scalar-relativistic time-dependent density theory simulations reveal that efficient ISC takes place along 1/3MLCT gateway states. Subsequently, competitive electron transfer (ET) pathways involving the organic chromophore, i.e., 10-methylphenothiazinyl and the terpyridyl ligands are available. The kinetics of the underlying ET processes were investigated within the semiclassical Marcus picture and along efficient internal reaction coordinates that connect the respective photoredox intermediates. The key parameter that governs the population transfer away from the metal toward the organic chromophore either by means of ligand-to-ligand (3LLCT; weakly coupled) or intra-ligand charge transfer (3ILCT; strongly coupled) states was determined to be the magnitude of the involved electronic coupling.

Excited state processes of dinuclear Pt(II) complexes bridged by 8-hydroxyquinoline

Dinuclear d⁸ Pt(II) complexes, where two mononuclear square planar Pt(II) units are bridged in an "A-frame" geometry, possess photophysical properties characterised by either metal-to-ligand-(MLCT) or metal-metal-ligand-to-ligand charge transfer (MMLCT) transitions determined by the distance between the two Pt(II) centres. When using 8-hydroxyquinoline (8HQH) as the bridging ligand to construct novel dinuclear complexes with general formula [C^NPt(μ-8HQ)]₂, where C^N is either 2-phenylpyridine (1) or 7,8-benzoquinoline (2), triplet ligand-centered (³LC) photophysics results echoing that in a mononuclear model chromophore, [Pt(8HQ)₂] (3). The lengthened Pt-Pt distances of 3.255 Å (1) and 3.243 Å (2) results in a lowest energy absorption centred around 480 nm assigned as having mixed LC/MLCT character by TD-DFT, mirroring the visible absorption spectrum of 3. Additionally, 1 and 2 exhibit ³LC photoluminescence with limited quantum yields (0.008) from broad transitions centred near 680 nm. Photoexcitation of 1-3 leads to an initially prepared excited state that relaxes within 15 ps to a ³LC excited state centred on the 8HQ bridge, which then persists for several microseconds. All the experimental results correspond well with DFT electronic structure calculations.

Luminescent Complexes of Platinum, Iridium, and Coinage Metals Containing N-Heterocyclic Carbene Ligands: Design, Structural Diversity, and Photophysical Properties

The employment of N-heterocyclic carbenes (NHCs) to design luminescent metal compounds has been the focus of recent intense investigations because of the strong σ-donor properties, which bring stability to the whole system and tend to push the d-d dark states so high in energy that they are rendered thermally inaccessible, thereby generating highly emissive complexes for useful applications such as organic light-emitting diodes (OLEDs), or featuring chiroptical properties, a field that is still in its infancy. Among the NHC complexes, those containing organic chromophores such as naphthalimide, pyrene, and carbazole exhibit rich emission behavior and thus have attracted extensive interest in the past five years, especially carbene coinage metal complexes with carbazolate ligands. In this review, the design strategies of NHC-based luminescent platinum and iridium complexes with large spin-orbit-coupling (SOC) are described first. Subsequent paragraphs illustrate the recent advances of luminescent coinage metal complexes with nucleophilic- and electrophilic-based carbenes based on silver, gold, and copper metal complexes that have the ability to display rich excited state emissions in particular via thermally activated delayed fluorescence (TADF). The luminescence mechanism and excited state dynamics are also described. We then summarize the advance of NHC-metal complexes in the aforementioned fields in recent years. Finally, we propose the development trend of this fast-growing field of luminescent NHC-metal complexes.

Water-soluble ruthenium complex-pyrene dyads with extended triplet lifetimes for efficient energy transfer applications

Long triplet lifetimes of excited photosensitizers are essential for efficient energy transfer reactions in water, given that the concentrations of dissolved oxygen and suitable acceptors in aqueous media are typically much lower than in organic solvents. Herein, we report the design, synthesis and photochemical characterization of two structurally related water-soluble ruthenium complex-based dyads decorated with a covalently attached pyrene chromophore. The triplet energy of the latter is slightly below that of the metal complex enabling a so-called triplet reservoir and excited-state lifetime extensions of up to two orders of magnitude. The diimine co-ligands, which can be modified easily, have a major impact on both the ultrafast intramolecular energy transfer (iEnT) kinetics upon excitation with visible light and the lifetime of the resulting long-lived pyrene triplet. The phenanthroline-containing dyad shows fast triplet pyrene formation (25 ps) and an exceptionally long triplet lifetime beyond 50 microseconds in neat water. The iEnT process via the Dexter mechanism is slower by a factor of two when bipyridine co-ligands are employed, which is rationalized by a poor orbital overlap. Both dyads are very efficient sensitizers for the formation of singlet oxygen in air-saturated water as well as for the bimolecular generation of anthracene triplets that are key intermediates in upconversion mechanisms. This is demonstrated by the 5-hydroxymethylfurfural oxidation, which yields completely different main products depending on the pH value of the aqueous solution, as an initial application-related experiment and by time-resolved spectroscopy. Our findings are important in the greater contexts of photocatalysis and energy conversion in the "green" solvent water.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4′,5′]-isoquinolino-[2′,1′,:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Thermally Activated Bright-State Delayed Blue Photoluminescence from InP Quantum Dots

Thermally activated delayed photoluminescence (TADPL) generated from organic chromophore-functionalized quantum dots (QDs) is potentially beneficial for persistent light generation, QD-based PL sensors, and photochemical synthesis. While previous research demonstrated that naphthoic acid-functionalized InP QDs can be employed as low-toxicity, blue-emissive TADPL materials, the electron trap states inherent in these nanocrystals inhibited the observation of TADPL emerging from the higher-lying bright states. Here, we address this challenge by employing the heterocyclic aromatic compound 8-quinolinecarboxylic acid (QCA), whose triplet energy is strategically positioned to bypass the electron trap states in InP QDs. Transient absorption and photoluminescence spectroscopies revealed the generation of bright-state TADPL from QCA-functionalized InP QDs resulting from a nearly quantitative Dexter-like triplet-triplet energy transfer (TTET) from photoexcited InP QDs to surface-anchored QCA chromophores followed by reverse TTET from these bound molecules to the InP QDs. This modification resulted in a 119-fold increase in the average PL intensity decay time with respect to the as-synthesized InP QDs.

Dinuclear Pt(II) Complexes with Red and NIR Emission Governed by Ligand Control of the Intramolecular Pt-Pt Distance

Red and near-infrared (NIR) phosphorescent double-decker dinuclear Pt(II) complexes were synthesized, and their structural and spectroscopic properties were characterized. The Pt(II) complexes, which are composed of achiral ligands and are themselves chiral, were shown to exist as racemic mixtures using single-crystal X-ray crystallography. The Pt(II) complexes have different intramolecular Pt-Pt distances that are governed by the electronic characteristics of the component C^N ligands. Specifically, strengthening of π-back-donation between Pt(II) and N atom of the C^N ligand leads to shortening of the Pt-Pt distance. The results of both experimental and computational investigations show that the Pt-Pt distances in the dinuclear Pt(II) complexes significantly influence the band gap energies and corresponding emission wavelengths. Consequently, the uncovered C^N ligand based method to finely control intramolecular Pt-Pt distances in dinuclear Pt(II) complexes can be utilized as a guideline for the design of the double-decker dinuclear Pt(II) complexes with red and NIR tuned phosphorescence.

Merging of a Perylene Moiety Enables a RuII Photosensitizer with Long-Lived Excited States and the Efficient Production of Singlet Oxygen

Multichromophoric systems based on a RuII polypyridine moiety containing an additional organic chromophore are of increasing interest with respect to different light-driven applications. Here, we present the synthesis and detailed characterization of a novel RuII photosensitizer, namely [(tbbpy)2 Ru((2-(perylen-3-yl)-1H-imidazo[4,5-f][1,10]-phenanthrolline))](PF6 )2 RuipPer, that includes a merged perylene dye in the back of the ip ligand. This complex features two emissive excited states as well as a long-lived (8 μs) dark state in acetonitrile solution. Compared to prototype [(bpy)3 Ru]2+ -like complexes, a strongly altered absorption (ϵ=50.3×103  M-1  cm-1 at 467 nm) and emission behavior caused by the introduction of the perylene unit is found. A combination of spectro-electrochemistry and time-resolved spectroscopy was used to elucidate the nature of the excited states. Finally, this photosensitizer was successfully used for the efficient formation of reactive singlet oxygen.

A novel heterometallic platinum(ii)–silver(i) alkynyl complex [PtAg(dppm)2(CCC6H4COOCH3-4)2Cl] with two crystal morphologies exhibiting morphology-dependent photoluminescence

A novel complex [PtAg(dppm)2(CCC6H4COOCH3-4)2Cl] with two crystal morphologies as rod-like and prism was separately obtained by manipulating the recrystallization solvents. They exhibit glamorous morphology-dependent photoluminescence.

Photoactive iron complexes: more sustainable, but still a challenge

With the “Criticality Score” used as a benchmark for sustainability – potentials, strategies and challenges are discussed to replace noble metal compounds in photosensitizers by the sustainable alternative iron.

Comprehensive Picture of the Excited State Dynamics of Cu(I)- and Ru(II)-Based Photosensitizers with Long-Lived Triplet States

Ru(II)- and Cu(I)-based photosensitizers featuring the recently developed biipo ligand (16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one) were comprehensively investigated by X-ray crystallography, electrochemistry, and especially several time-resolved spectroscopic methods covering all time scales from femto- to milliseconds. The analysis of the experimental results is supported by density functional theory (DFT) calculations. The biipo ligand consists of a coordinating 1,10-phenanthroline moiety fused with a 1,8-naphthalimide unit, which results in an extended π-system with an incorporated electron acceptor moiety. In a previous study, it was shown that this ligand enabled a Ru(II) complex that is an efficient singlet oxygen producer and of potential use for other light-driven applications due to its long emission lifetime. The goal of our here presented research is to provide a full spectroscopic picture of the processes that follow optical excitation. Interestingly, the Ru(II) and Cu(I) complexes differ in their characteristics even though the lowest electronically excited states involve in both cases the biipo ligand. The combined spectroscopic results indicate that an emissive ³MLCT state and a rather dark ³LC state are populated, each to some extent. For the Cu(I) complex, most of the excited population ends up in the ³LC state with an extraordinary lifetime of 439 μs in the solid state at 20 K, while a significant population of the ³MLCT state causes luminescence for the Ru(II) complex. Hence, there is a balance between these two states, which can be tuned by altering the metal center or even by thermal energy, as suggested by the temperature-dependent experiments.

Perylene Bisimide-Cored Supramolecular Coordination Complexes: Interplay between Ensembles, Excited State Processes, and Aggregation Behaviors

Manipulating the optical properties of fluorescent species is challenging owing to complicated and tedious synthetic works. Herein, the photophysical properties of perylene bisimide (PBI) were effectively tuned by varying the geometrical arrangement of PBI moieties within supramolecular coordination complexes (SCCs), where a PBI-based dicycle (2) and a trigonal prism (3) were generated via using a typical 90° Pt(II) reagent, cis-(PEt₃ )₂ Pt(OTf)₂ -based coordination-driven self-assembly approach. The ligand, an ortho-tetrapyridiyl-PBI (1), exhibits a moderate fluorescence quantum yield (∼13 %) and efficient inter-system crossing (ISC). 2, however, is much more emissive with a fluorescence quantum yield of ∼41 %, and the relevant ISC process is significantly hindered. The fluorescence quantum yield of 3 is merely ∼6 % due to the observed symmetry-breaking charge separation (SB-CS), which turns to triplet state upon charge recombination. Interestingly, 3 could be fully transformed into 2 by simply adding a suitable amount of a 90° Pt(II)-based neutral triangle. Moreover, 2 tends to form discrete dimers both in crystal and solution states, but 3 does not show the property. Therefore, controlling geometrical arrangement of fluorophores through coordination-driven self-assembly could be taken as another effective way to tune their excited state relaxation pathways and construct high-performance optical molecular materials, which generally have to be prepared via organic synthesis.

Accessing the triplet manifold of naphthalene benzimidazole-phenanthroline in rhenium(I) bichromophores

The steady-state and ultrafast to supra-nanosecond excited state dynamics of fac-[Re(NBI-phen)(CO)₃(L)](PF₆) (NBI-phen = 16H-benzo[4',5']isoquinolino[2',1':1,2]imidazo[4,5-f][1,10]phenanthrolin-16-one) as well as their respective models of the general molecular formula [Re(phen)(CO)₃(L)](PF₆) (L = PPh₃ and CH₃CN) has been investigated using transient absorption and time-gated photoluminescence spectroscopy. The NBI-phen containing molecules exhibited enhanced visible light absorption with respect to their models and a rapid formation (<6 ns) of the triplet ligand-centred (LC) excited state of the organic ligand, NBI-phen. These triplet states exhibit an extended excited state lifetime that enable the energized molecules to readily engage in triplet-triplet annihilation photochemistry.

Ligand-to-Metal Charge-Transfer Photophysics and Photochemistry of Emissive d0 Titanocenes: A Spectroscopic and Computational Investigation

Complexes with ligand-to-metal charge-transfer (LMCT) excited states involving d⁰ metals represent a new design for photocatalysts. Herein, the photochemistry and photophysics of d⁰ titanocenes of the type Cp₂Ti(C₂R)₂, where C₂R = ethynylphenyl (C₂Ph), 4-ethynyldimethylaniline (C₂DMA), or 4-ethynyltriphenylamine (C₂TPA), have been investigated. Cp₂Ti(C₂Ph)₂ and Cp₂Ti(C₂DMA)₂ have also been characterized by single-crystal X-ray diffraction. The two aryl rings in Cp₂Ti(C₂DMA)₂ are nearly face-to-face in the solid state, whereas they are mutually perpendicular for Cp₂Ti(C₂Ph)₂. All three complexes are brightly emissive at 77 K but photodecompose at room temperature when irradiated into their lowest-energy absorption band. The emission wavelengths and photodecomposition quantum yields are as follows: Cp₂Ti(C₂Ph)₂, 575 nm and 0.65; Cp₂Ti(C₂TPA)₂, 642 nm and 0.42; Cp₂Ti(C₂DMA)₂, 672 nm and 0.25. Extensive benchmarking of the density functional theory (DFT) model against the structural data and of the time-dependent DFT (TDDFT) model against the absorption and emission data was performed using combinations of 13 different functionals and 4 basis sets. The model that predicted the absorption and emission data with the greatest fidelity utilized MN15/LANL2DZ for both the DFT optimization and the TDDFT. Computational analysis shows that absorption involves a transition to a ¹LMCT state. Whereas the spectroscopic data for Cp₂Ti(C₂TPA)₂ and Cp₂Ti(C₂DMA)₂ are well modeled using the optimized structure of these complexes, Cp₂Ti(C₂Ph)₂ required averaging of the spectra from multiple rotamers involving rotation of the Ph rings. Consistent with this finding, an energy scan of all rotamers showed a very flat energetic surface, with less than 1.3 kcal/mol separating the minimum and maximum. The computational data suggest that emission occurs from a ³LMCT state. Optimization of the ³LMCT state demonstrates compression of the C-Ti-C bond angle, consistent with the known products of photodecomposition.

Bis-N-Heterocyclic Carbene Complexes of Coinage Metals Containing Four Naphthalimide Units: A Structure-Emission Properties Relationship Study

Naphthalimide derivatives provide highly versatile self-assembled systems and aggregated forms with fascinating emission properties that make them potential candidates for many applications such as bioimaging and sensing. Although various aggregated species of naphthalimide derivatives have been well documented, little is known about the correlation between their structure and photophysical properties. Here the preparation of a series of tetrameric naphthalimide molecules in which naphthalimide units are linked by bis-N-heterocyclic carbene complexes of coinage metals is described. An in-depth structural investigation into these tetramers has been carried out in solution and the solid state using spectroscopic methods, X-ray crystallography, and computational methods. The experimental and calculated data indicate that the magnitude of the intramolecular interchromophoric π-interactions increases either by an increase in the metal ionic radius or on going from the solid to the solution state. These tetrameric naphthalimide compounds show intramolecular excimeric emissions in the solid and solution phases. However, the quantum yield efficiencies of these excimeric emissions show a trend similar to that for the intramolecular π-interactions either by going from the solution to the solid state or with an increase in the metal ionic radius. Surprisingly, the amine derivative analogues of the silver(I) compound showed an unusual increase in the emission quantum yield efficiency to 92% in solution due to intramolecular hydrogen bonds between amine substituents on adjacent naphthalimde units.

6,6'-Ditriphenylamine-2,2'-bipyridine: Coordination Chemistry and Electrochemical and Photophysical Properties

A 2,2'-bipyridine with bulky triphenylamine substituents in the 6 and 6' positions of the ligand (6,6'-ditriphenylamine-2,2'-bipyridine, 6,6'-diTPAbpy) was generated. Despite the steric bulk, the ligand readily formed bis(homoleptic) complexes with copper(I) and silver(I) ions. Unfortunately, efforts to use the 6,6'-diTPAbpy system to generate heteroleptic [Cu(6,6'-diTPAbpy)(bpy)]⁺ complexes were unsuccessful with only the [Cu(6,6'-diTPAbpy)₂](PF₆) complex observed. The 6,6'-diTPAbpy ligand could also be reacted with 6-coordinate metal ions that featured small ancillary ligands, namely, the [Re(CO)₃Cl] and [Ru(CO)₂Cl₂] fragments. While the complexes could be formed in good yields, the steric bulk of the TPA units does alter the coordination geometry. This is most readily seen in the [(6,6'-diTPAbpy)Re(CO)₃Cl] complex where the Re(I) ion is forced to sit 23° out of the plane formed by the bpy unit. The electrochemical and photophysical properties of the family of compounds were also examined. 6,6'-diTPAbpy exhibits a strong ILCT absorption band (356 nm, 50 mM^-1 cm^-1) which displays a small increase in intensity for the homoleptic complexes ([Cu(6,6'-diTPAbpy)₂]⁺; 353 nm, 72 mM^-1 cm^-1, [Ag(6,6'-diTPAbpy)₂]⁺; 353 nm, 75 mM^-1 cm^-1), despite containing 2 equiv of the ligand, attributed to an increased dihedral angle between the TPA and bpy moieties. For the 6-coordinate complexes the ILCT band is further decreased in intensity and overlaps with MLCT bands, consistent with a further increased TPA-bpy dihedral angle. Emission from the ¹ILCT state is observed at 436 nm (τ = 4.4 ns) for 6,6'-diTPAbpy and does not shift for the Cu, Ag, and Re complexes, although an additional ³MLCT emission is observed for [Re(6,6'-diTPAbpy)(CO)₃Cl] (640 nm, τ = 13.8 ns). No emission was observed for [Ru(6,6'-diTPAbpy)(CO)₂Cl₂]. Transient absorption measurements revealed the population of a ³ILCT state for the Cu and Ag complexes (τ = 80 ns). All assignments were supported by TD-DFT calculations and resonance Raman spectroscopic measurements.

Excited-State Switching in Rhenium(I) Bipyridyl Complexes with Donor-Donor and Donor-Acceptor Substituents

The optical properties of two Re(CO)₃(bpy)Cl complexes in which the bpy is substituted with two donor (triphenylamine, TPA, ReTPA₂) as well as both donor (TPA) and acceptor (benzothiadiazole, BTD, ReTPA-BTD) groups are presented. For ReTPA₂ the absorption spectra show intense intraligand charge-transfer (ILCT) bands at 460 nm with small solvatochromic behavior; for ReTPA-BTD the ILCT transitions are weaker. These transitions are assigned as TPA → bpy transitions as supported by resonance Raman data and TDDFT calculations. The excited-state spectroscopy shows the presence of two emissive states for both complexes. The intensity of these emission signals is modulated by solvent. Time-resolved infrared spectroscopy definitively assigns the excited states present in CH₂Cl₂ to be MLCT in nature, and in MeCN the excited states are ILCT in nature. DFT calculations indicated this switching with solvent is governed by access to states controlled by spin-orbit coupling, which is sufficiently different in the two solvents, allowing to select out each of the charge-transfer states.

Controlling Spin-Correlated Radical Pairs with Donor-Acceptor Dyads: A New Concept to Generate Reduced Metal Complexes for More Efficient Photocatalysis

One-electron reduced metal complexes derived from photoactive ruthenium or iridium complexes are important intermediates for substrate activation steps in photoredox catalysis and for the photocatalytic generation of solar fuels. However, owing to the heavy atom effect, direct photochemical pathways to these key intermediates suffer from intrinsic efficiency problems resulting from rapid geminate recombination of radical pairs within the so-called solvent cage. In this study, we prepared and investigated molecular dyads capable of producing reduced metal complexes via an indirect pathway relying on a sequence of energy and electron transfer processes between a Ru complex and a covalently connected anthracene moiety. Our test reaction to establish the proof-of-concept is the photochemical reduction of ruthenium(tris)bipyridine by the ascorbate dianion as sacrificial donor in aqueous solution. The photochemical key step in the Ru-anthracene dyads is the reduction of a purely organic (anthracene) triplet excited state by the ascorbate dianion, yielding a spin-correlated radical pair whose (unproductive) recombination is strongly spin-forbidden. By carrying out detailed laser flash photolysis investigations, we provide clear evidence for the indirect reduced metal complex generation mechanism and show that this pathway can outperform the conventional direct metal complex photoreduction. The further optimization of our approach involving relatively simple molecular dyads might result in novel photocatalysts that convert substrates with unprecedented quantum yields.

Temperature and solvent-dependent photoluminescence quenching in [Ru(bpy)2(bpy-cc-AQ)]2

I have herein investigated the solvent-dependent photoluminescence quenching mechanism of [Ru(bpy)₂(bpy-cc-AQ)]²⁺ using variable temperature emission spectroscopies. The photophysics of this complex are dominated by an excited-state thermal equilibrium between a photoluminescent ³MLCT state and a charge-separated state that lies higher in energy relative to the ³MLCT state in low polarity solvents and approximately isoenergetic in high polarity solvents. Furthermore, an unusual photoluminescence temperature-dependence in high polarity solvents is shown to arise from competition between enthalpic factors favouring the charge-separated state and entropic factors favouring the photoluminescent ³MLCT state, analogous to the molecular light-switch effect of [Ru(bpy)₂(dppz)]²⁺. The solvent-dependent photoluminescence quenching of [Ru(bpy)₂(bpy-cc-AQ)]²⁺ is attributed to two key solvent-dependent factors: (1) the excited-state equilibrium position and (2) the rate of charge-recombination from the charge-separated state.

Ultrafast processes: coordination chemistry and quantum theory

Coordination compounds, characterized by fascinating and tunable electronic properties, are capable of binding easily to proteins, polymers, wires and DNA. Upon irradiation, these molecular systems develop functions finding applications in solar cells, photocatalysis, luminescent and conformational probes, electron transfer triggers and diagnostic or therapeutic tools. The control of these functions is activated by the light wavelength, the metal/ligand cooperation and the environment within the first picoseconds (ps). After a brief summary of the theoretical background, this perspective reviews case studies, from 1st row to 3rd row transition metal complexes, that illustrate how spin-orbit, vibronic coupling and quantum effects drive the photophysics of this class of molecules at the early stage of the photoinduced elementary processes within the fs-ps time scale range.

Efficient Deep Blue Platinum Acetylide Phosphors with Acyclic Diaminocarbene Ligands

Here we report five blue-phosphorescent platinum bis-phenylacetylide complexes with an investigation of their photophysical and electrochemical attributes. Three of the complexes (1-3) are of the general formula cis-Pt(CNR)₂ (C≡CPh)₂ , in which CNR is a variably substituted isocyanide and C≡CPh is phenylacetylide. These isocyanide complexes serve as precursors for complexes of the general formula cis-Pt(CNR)(ADC)(C≡CPh)₂ (4 and 5), in which ADC is an acyclic diaminocarbene installed by amine nucleophilic addition to one of the isocyanides. All of the complexes exhibit deep blue phosphorescence with λ_max ∼430 nm in poly(methyl methacrylate) (PMMA) thin films. Whereas isocyanide complexes 1-3 exhibit modest photoluminescence quantum yields (Φ_PL ), incorporation of one acyclic diaminocarbene ligand results in a three-fold to 16-fold increase in Φ_PL while still maintaining an identical deep blue color profile.

Role of MLCT States in the Franck-Condon Region of Neutral, Heteroleptic Cu(I)-4H-imidazolate Complexes: A Spectroscopic and Theoretical Study

The impact of the electronic structure of a series of 4H-imidazolate ligands in neutral, heteroleptic Cu(I) complexes is investigated. Remarkable broad and strong ligand-dependent absorption in the visible range of the electromagnetic spectrum renders the studied complexes promising photosensitizers for photocatalytic applications. The electronic structure of the Cu(I) complexes and the localization of photoexcited states in the Franck-Condon region are unraveled by means of UV-vis absorption and resonance Raman (rR) spectroscopy supported by time-dependent density functional theory (TD-DFT) calculations. The visible absorption bands stem from a superposition of bright metal-to-ligand charge-transfer (MLCT) and π-π* as well as weakly absorbing MLCT states. Additionally, the analysis of involved molecular orbitals and rR spectra upon excitation of MLCT and π-π* states highlights the impact of the electronic structure of the 4H-imidazolate ligands on the properties of the corresponding Cu(I) complexes to avail a toolbox for predictive studies and efficient complex design.

Novel luminescent homo/heterometallic platinum(ii) alkynyl complexes based on Y-shaped pyridyl diphosphines

A series of dinuclear platinum(ii) alkynyl complexes [Pt2L2(C[triple bond, length as m-dash]CC6H4R-4)4] (R = H 1, CH32, But3) and unusual tetranuclear Pt(ii)-Ag(i) clusters [Pt2Ag2L(C[triple bond, length as m-dash]CC6H4R-4)6] (R = H, 4; CH3, 5; But, 6), together with novel polymer crystals [Pt2Ag2L(C[triple bond, length as m-dash]CC6H5)6]∞ ([4]∞), were synthesized by a self-assembly reaction between [NBu4]2[Pt(C[triple bond, length as m-dash]CC6H4-R-4)4] and [Ag6L6]6+ (L = 4-(3,5-(diphenylphosphine)phenyl)pyridine). These complexes were characterized by using a range of spectroscopic techniques and complexes 1, 3, 5, and [4]∞ were analysed by X-ray crystallography. Each platinum atom of the Pt(ii)-Ag(i) clusters shows an unusual asymmetric distorted square planar geometry with three alkynyl groups and one bridging L phosphorus atom. Dinuclear complexes 1-3 demonstrate solid-state weak blue luminescence, while tetranuclear Pt(ii)-Ag(i) clusters 4-6 show intense blue-green or yellow-green emission. Furthermore, the crystalline samples of polymer [4]∞ display bright yellow emission (518 nm) that is significantly red-shifted as compared to monomer crystal 4.

Energy Migration Processes in Re(I) MLCT Complexes Featuring a Chromophoric Ancillary Ligand

We present the synthesis, structural characterization, electronic structure calculations, and ultrafast and supra-nanosecond photophysical properties of a series of five Re(I) bichromophores exhibiting metal to ligand charge transfer (MLCT) excited states based on the general formula fac-[Re(N^∧N)(CO)₃(PNI-py)]PF_6, where PNI-py is 4-piperidinyl-1,8-naphthalimidepyridine and N^∧N is a diimine ligand (Re1-5), along with their corresponding model chromophores where 4-ethylpyridine was substituted for PNI-py (Mod1-5). The diimine ligands used include 1,10-phenanthroline (phen, 1), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bcp, 2), 4,4'-di-tert-butyl-2,2'-bipyridine (dtbb, 3), 4,4'-diethyl ester-2,2'-bipyridine (deeb, 4), and 2,2'-biquinoline (biq, 5). In these metal-organic bichromophores, structural modification of the diimine ligand resulted in substantial changes to the observed energy transfer efficiencies between the two chromophores as a result of the variation in ³MLCT excited-state energies. The photophysical properties and energetic pathways of the model chromophores were investigated in parallel to accurately track the changes that arose from introduction of the organic chromophore pendant on the ancillary ligand. All relevant photophysical and energy transfer processes were probed and characterized using time-resolved photoluminescence spectroscopy, ultrafast and nanosecond transient absorption spectroscopy, and time-dependent density functional theory calculations. Of the five bichromophores in this study, four (Re1-4) exhibited a thermal equilibrium between the ³PNI-py and the ³MLCT excited state, drastically extending the lifetimes of the parent model chromophores.

Thermally Activated Delayed Photoluminescence: Deterministic Control of Excited-State Decay

Thermally activated photophysical processes are ubiquitous in numerous organic and metal-organic molecules, leading to chromophores with excited-state properties that can be considered an equilibrium mixture of the available low-lying states. Relative populations of the equilibrated states are governed by temperature. Such molecules have been devised as high quantum yield emitters in modern organic light-emitting diode technology and for deterministic excited-state lifetime control to enhance chemical reactivity in solar energy conversion and photocatalytic schemes. The recent discovery of thermally activated photophysics at CdSe nanocrystal-molecule interfaces enables a new paradigm wherein molecule-quantum dot constructs are used to systematically generate material with predetermined photophysical response and excited-state properties. Semiconductor nanomaterials feature size-tunable energy level engineering, which considerably expands the purview of thermally activated photophysics beyond what is possible using only molecules. This Perspective is intended to provide a nonexhaustive overview of the advances that led to the integration of semiconductor quantum dots in thermally activated delayed photoluminescence (TADPL) schemes and to identify important challenges moving into the future. The initial establishment of excited-state lifetime extension utilizing triplet-triplet excited-state equilibria is detailed. Next, advances involving the rational design of molecules composed of both metal-containing and organic-based chromophores that produce the desired TADPL are described. Finally, the recent introduction of semiconductor nanomaterials into hybrid TADPL constructs is discussed, paving the way toward the realization of fine-tuned deterministic control of excited-state decay. It is envisioned that libraries of synthetically facile composites will be broadly deployed as photosensitizers and light emitters for numerous synthetic and optoelectronic applications in the near future.

Picosecond to Nanosecond Manipulation of Excited-State Lifetimes in Complexes with an FeII to TiIV Metal-to-Metal Charge Transfer: The Role of Ferrocene Centered Excited States

Time-resolved transient absorption spectroscopy and computational analysis of D-π-A complexes comprising Fe^II donors and Ti^IV acceptors with the general formula ^RCp₂Ti(C₂Fc)₂ (where ^RCp = Cp*, Cp, and ^MeOOCCp) and ^TMSCp₂Ti(C₂Fc)(C₂R) (where R = Ph or CF₃) are reported. The transient absorption spectra are consistent with an Fe^III/Ti^III metal-to-metal charge-transfer (MMCT) excited state for all complexes. Thus, excited-state decay is assigned to back-electron transfer (BET), the lifetime of which ranges from 18.8 to 41 ps. Though spectroscopic analysis suggests BET should fall into the Marcus inverted regime, the observed kinetics are not consistent with this assertion. TDDFT calculations reveal that the singlet metal-to-metal charge-transfer (¹MMCT) excited state for the Fe^II/Ti^IV complexes is not purely MMCT in nature but is contaminated with the higher-energy ¹Fc (d-d) state. For the diferrocenyl complexes, ^RCp₂Ti(C₂Fc)₂, the ratio of MMCT to Fc centered character ranges from 57:43 for the Cp* complex to 85:15 for the ^MeOOCCp complex. For the diferrocenyl and monoferrocenyl complexes investigated herein, the excited-state lifetimes decrease with increased ¹Fc character. The effect of Cu^I coordination was also analyzed by time-resolved transient absorption spectroscopy and reveals the elongation of the excited-state lifetime by 3 orders of magnitude to 63 ns. The transient spectra and TDDFT analysis suggest that the long-lived excited state in Cp₂Ti(C₂Fc)₂·CuX (where X is Cl or Br) is a triplet iron species with an electron arrangement of Ti^IV-³Fe^II-Cu^I.

Excited-State Triplet Equilibria in a Series of Re(I)-Naphthalimide Bichromophores

We present the synthesis, structural characterization, electronic structure calculations, and the ultrafast and supra-nanosecond photophysical properties of a series of five bichromophores of the general structural formula [Re(5-R-phen)(CO)₃(dmap)](PF₆), where R is a naphthalimide (NI), phen = 1,10-phenanthroline, and dmap is 4-dimethylaminopyridine. The NI chromophores were systematically modified at their 4-positions with -H (NI), -Br (BrNI), phenoxy (PONI), thiobenzene (PSNI), and piperidine (PNI), rendering a series of metal-organic bichromophores (Re1-Re5, respectively) featuring variability in the singlet and triplet energies in the pendant NI subunit. Five closely related organic chromophores as well as [Re(phen)(CO)₃(dmap)](PF₆) (Re6) were investigated in parallel to appropriately model the photophysical properties exhibited in the bichromophores. The excited state processes of all molecules in this study were elucidated using a combination of transient absorption spectroscopy and time-resolved photoluminescence (PL) spectroscopy, revealing the kinetics of the energy transfer processes occurring between the appended chromophores. The spectroscopic analysis was further supported by electronic structure calculations which identified the origin of many of the experimentally observed electronic transitions.

Novel ruthenium(ii) and iridium(iii) BODIPY dyes: insights into their application in photodynamic therapy in vitro

Organic-metal complexes are promising molecules for use in photodynamic therapy (PDT). The aim of this study was to investigate in vitro effects of novel Ru(ii) and Ir(iii) BODIPY complexes for PDT. These hybrid organic-metal molecules (Ru-BD and Ir-BD) have been synthesized via reactions of a BODIPY precursor (BD) with a phenanthroline unit bearing Ru(ii) (3) and novel Ir(iii) (4) compounds. The crystal structures of the new distyryl BODIPY (BD) and Ru(ii) complex (3) are also reported. The photophysical and singlet oxygen generation properties of Ru-BD and Ir-BD were investigated in comparison with unsubstituted BODIPY (BD). Moreover, Ru-BD and Ir-BD have been biologically evaluated in vitro in chronic myeloid leukemia and cervical cancer cell lines in terms of photodynamic therapy efficacy in the presence of BD control. These complexes were not toxic in the dark but red light was needed to induce cell death. These data support the fact that Ru-BD could be accepted as a valuable photosensitizer-drug for further PDT treatment.

Solution versus solid-state dual emission of the Au(i)-alkynyl diphosphine complexes via modification of polyaromatic spacers

Single molecule luminophores capable of multiple emissions are essential for the development of new materials with unconventional photophysical behavior.

A family of readily synthesised phosphorescent platinum(ii) complexes based on tridentate N^N^O-coordinating Schiff-base ligands

Tridentate ligands, easily synthesised by condensation reactions of simple starting materials, can be used to prepare Pt(ii) complexes that are luminescent in solution, emitting in the red or deep-red spectral region, according to the substituents.

Ultrafast Dynamics of Charge Transfer and Photochemical Reactions in Solar Energy Conversion

For decades, ultrafast time-resolved spectroscopy has found its way into an increasing number of applications. It has become a vital technique to investigate energy conversion processes and charge transfer dynamics in optoelectronic systems such as solar cells and solar-driven photocatalytic applications. The understanding of charge transfer and photochemical reactions can help optimize and improve the performance of relevant devices with solar energy conversion processes. Here, the fundamental principles of photochemical and photophysical processes in photoinduced reactions, in which the fundamental charge carrier dynamic processes include interfacial electron transfer, singlet excitons, triplet excitons, excitons fission, and recombination, are reviewed. Transient absorption (TA) spectroscopy techniques provide a good understanding of the energy/electron transfer processes. These processes, including excited state generation and interfacial energy/electron transfer, are dominate constituents of solar energy conversion applications, for example, dye-sensitized solar cells and photocatalysis. An outlook for intrinsic electron/energy transfer dynamics via TA spectroscopic characterization is provided, establishing a foundation for the rational design of solar energy conversion devices.

Semiconductor Nanocrystal Light Absorbers for Photon Upconversion

Semiconductor nanocrystals (NCs) can initiate energy and charge transfer in multiple applications with their unique optical and electronic properties. In particular, NCs are excellent light absorbers for initiating triplet energy transfer (TET) to organic molecules, a key step in triplet-fusion-based photon upconversion. Triplet energy transfer across this inorganic-organic interface is one of the bottlenecks that currently limits the overall photon upconversion quantum yield. In this Perspective, we summarize the progress made in the past three years on this hybrid photon upconversion platform. We discuss the effects of NC size, composition, and surface states on TET. Nanocrystal surface engineering may address the loss mechanisms arising from defect states and exciton-phonon coupling. Alternative materials for NC triplet photosensitizers that do not contain toxic heavy metals will be especially useful for various biological applications.

Sensitized triplet-triplet annihilation upconversion in water and its application to photochemical transformations

Sensitized triplet-triplet annihilation (TTA) is a promising mechanism for solar energy conversion, but so far its application has been practically completely limited to organic solvents and self-assembled or solid state systems. Combining water-soluble ruthenium complex-pyrene dyads with particularly long excited-state lifetimes as sensitizers and highly fluorescent commercial anthracenes as acceptors/annihilators, we were able to achieve green-to-violet upconversion with unprecedented quantum yields in pure water. Compared to the only known system exploiting sensitized TTA in homogeneous aqueous solution, we improve the overall photon upconversion efficiency by a full order of magnitude and present the very first example for a chemical transformation on a laboratory scale via upconversion in water. Specifically, we found that a thermodynamically challenging carbon-chlorine bond activation can be driven by green photons from an inexpensive continuous wave light source in the presence of dissolved oxygen. Our study is thus potentially relevant in the context of cleaning water from halogenated (toxic) contaminants and for sustainable photochemistry in the most environmentally friendly solvent.

Solid-State Photon Upconversion Materials: Structural Integrity and Triplet-Singlet Dual Energy Migration

Triplet-triplet annihilation-based photon upconversion (TTA-UC) is a process wherein longer-wavelength light (lower-energy photons) is converted into shorter-wavelength light (higher-energy photons) under low excitation intensity in multichromophore systems. There have been many reports on highly efficient TTA-UC in solution; however, significant challenges remain in the development of solid-state upconverters in order to explore real-world applications. In this Perspective, we discuss the advantages and challenges of different approaches for TTA-UC in solvent-free solid systems. We consider that the energy migration-based TTA-UC has the potential to achieve ideal materials with high UC efficiency at weak solar irradiance. While the UC performance of such systems is still limited at this moment, we introduce recently developed important concepts to improve it, including kinetic/thermodynamic donor dispersion in acceptor assemblies, defectless crystals, and triplet-singlet dual energy migration. Future integration of these concepts into a single material would realize the ideal TTA-UC system.

Chromophore-Functionalized Phenanthro-diimine Ligands and Their Re(I) Complexes

A series of diimine ligands has been designed on the basis of 2-pyridyl-1 H-phenanthro[9,10- d]imidazole (L1, L2). Coupling the basic motif of L1 with anthracene-containing fragments affords the bichromophore compounds L3-L5, of which L4 and L5 adopt a donor-acceptor architecture. The latter allows intramolecular charge transfer with intense absorption bands in the visible spectrum (lowest λabs 464 nm (ε = 1.2 × 104 M-1 cm-1) and 490 nm (ε = 5.2 × 104 M-1 cm-1) in CH2Cl2 for L4 and L5, respectively). L1-L5 show strong fluorescence in a fluid medium (Φem = 22-92%, λem 370-602 nm in CH2Cl2); discernible emission solvatochromism is observed for L4 and L5. In addition, the presence of pyridyl (L1-L5) and dimethylaminophenyl (L5) groups enables reversible alteration of their optical properties by means of protonation. Ligands L1-L5 were used to synthesize the corresponding [Re(CO)3X(diimine)] (X = Cl, 1-5; X = CN, 1-CN) complexes. 1 and 2 exhibit unusual dual emission of singlet and triplet parentage, which originate from independently populated 1ππ* and 3MLCT excited states. In contrast to the majority of the reported Re(I) carbonyl luminophores, complexes 3-5 display moderately intense ligand-based fluorescence from an anthracene-containing secondary chromophore and complete quenching of emission from the 3MLCT state presumably due to the triplet-triplet energy transfer (3MLCT → 3ILCT).