Molecular Phosphonate Cages: Model Compounds and Starting Materials for Phosphate Materials

Oxyphosphoranes as precursors to bridging phosphate-catecholate ligands

Examples of chelating ligands that incorporate P-O donors are seldom encountered. Herein, a series of novel bridging diphosphate ligand supported bimetallic Zr(iv), V(iii) and Ni(ii) complexes have been derived from reactions of the oxyphosphorane (C6Cl4O2)P(OEt)3 with the corresponding metal halides. The mechanism is probed and shown to involve elimination of ethyl halide, and ring opening affording the chelating phosphate-catecholate ligands.

Assembly of discrete and oligomeric structures of organotin double-decker silsesquioxanes: inherent stability studies

Discrete and oligomeric organotin DDSQs have been synthesized and characterized, both experimentally and through computational study. The stability of these compounds remains intrigued with the organization of their structure in the crystal lattice.

Assembling Homometallic Sb6 and Heterometallic Ti4Sb2 Oxo Clusters

Isolation and structural characterization of novel organoantimony(V)-based oxo clusters are reported. (RSb)₄(OH)₄(t-BuPO₃)₆ and (RSb)₂(O)(t-BuPO₃H)₆ independently in the presence of pyridine under solvothermal conditions afford the hexanuclear organoantimonate clusters [(RSb)₆(μ₃-O)₂(μ₂-O)₆(t-BuPO₃)₄], where R = p-i-PrC₆H₄ (1), p-ClC₆H₄ (2). Further, reaction of organostibonate phosphonate with Ti(OⁱPr)₄ in the presence of pyridine under solvothermal conditions afforded the mixed-metal titanium stibonate hexanuclear clusters [(RSb)₂Ti₄(μ₃-O)₂(μ₂-O)₂(t-BuPO₃)₄(μ-OCH₃)₄(OCH₃)₄], where R = p-i-PrC₆H₄ (3), p-ClC₆H₄ (4). Band gap measurements were performed on 1-4. They reveal a remarkable reduction in the band gap on moving from the heavier main-group-based oxo cages (1 and 2) to the titanium-incorporated oxo cages (3 and 4).

Modulation of the nuclearity of molecular Mg(ii)-phosphates: solid-state structural change involving coordinating solvents

Herein, we report the synthesis and molecular structures of various magnesium(ii)-phosphate monoesters. By using a bulky aryl substituted phosphate monoester, ArOPO₃H₂ (Ar = 2,6-(CHPh₂)₂-4-tBu-C₆H₂), we have reproducibly assembled mono-, di-, tetra- (cage and ring), hexa-, and polynuclear magnesium(ii)-phosphate monoesters. Interestingly, the hexanuclear magnesium(ii)-phosphate monoester encapsulates an open-cage dodecanuclear water cluster.

New Directions in Metal Phosphonate and Phosphinate Chemistry

In September 2018, the First European Workshop on Metal Phosphonates Chemistry brought together some prominent researchers in the field of metal phosphonates and phosphinates with the aim of discussing past and current research efforts and identifying future directions. The scope of this perspective article is to provide a critical overview of the topics discussed during the workshop, which are divided into two main areas: synthesis and characterisation, and applications. In terms of synthetic methods, there has been a push towards cleaner and more efficient approaches. This has led to the introduction of high-throughput synthesis and mechanochemical synthesis. The recent success of metal–organic frameworks has also promoted renewed interest in the synthesis of porous metal phosphonates and phosphinates. Regarding characterisation, the main advances are the development of electron diffraction as a tool for crystal structure determination and the deployment of in situ characterisation techniques, which have allowed for a better understanding of reaction pathways. In terms of applications, metal phosphonates have been found to be suitable materials for several purposes: they have been employed as heterogeneous catalysts for the synthesis of fine chemicals, as solid sorbents for gas separation, notably CO2 capture, as materials for electrochemical devices, such as fuel cells and rechargeable batteries, and as matrices for drug delivery.

Neutral and anionic phosphate-diesters as molecular templates for the encapsulation of a water dimer

Neutral and anionic phosphate diesters act as molecular templates for the encapsulation of water dimers.

New molecular heptanuclear cobalt phosphonates: synthesis, structures and magnetic properties

Synthesis, structures and magnetic properties (strong anisotropy, ferromagnetic and antiferromagnetic interactions) of novel {Co₇} homoleptic molecular cobalt phosphonates with a similar structure motif are described.

A highly efficient nucleophilic substitution reaction between R2P(O)H and triarylmethanols to synthesize phosphorus-substituted triarylmethanes

A highly efficient nucleophilic substitution reaction between R₂P(O)H and triarylmethanols was reported, which provides phosphorus-substituted triarylmethanes in rich diversity with 40–96% yields.

Dimensionality Alteration and Intra- versus Inter-SBU Void Encapsulation in Zinc Phosphate Frameworks

4,4'-Bipyridine-N-oxide (BIPYMO, 1), a less commonly employed coordination polymer linker, has been used as a ditopic spacer to bridge double-four-ring (D4R) zinc phosphate clusters to form novel framework coordination polymers. Zinc phosphate framework compounds [Zn4(X-dipp)4(BIPYMO)2]n·2MeOH [X = H (2), Cl (3), Br (4), I (5); dipp = 2,6-diisopropylphenyl phosphate] have been obtained by treating a methanol solution of zinc acetate with X-dippH2 and BIPYMO (in a 1:1:1 molar ratio) at ambient conditions. Framework phosphates 2-5 can also be obtained by treating the preformed D4R cubanes [Zn(X-dipp)(DMSO)]4 with required quantities of BIPYMO in methanol. Single-crystal X-ray diffraction studies reveal that these framework solids are two-dimensional (2D) networks as opposed to the diamondoid networks obtained when the parent unoxidized 4,4'-bipyridine is used as the linker (Inorg. Chem. 2014, 53, 8959). The two types of voids (viz., smaller intra-D4R and larger inter-D4R) present in these framework solids can be utilized for different types of encapsulation processes. For example, the in situ generated 2D framework 2 encapsulates fluoride ions accompanied by a change in the dimensionality of the framework to yield {[(nC4H9)4N][F@(Zn4(dipp)4(BIPYMO)2)]}n (6). The three-dimensional framework 6 represents the first structurally characterized example of a fluoride-ion-encapsulated polymeric coordination compound or a metal-organic framework. The possibility of utilizing inter-D4R voids as hosts for small organic molecules has been explored by treating in situ generated 2 with a series of organic molecules of appropriate size. Framework 2 has been found to be a selective host for benzil and not for other structurally similar molecules such as benzoquinone, benzidine, anthracene, naphthalene, α-pyridoin, etc. The benzil-occluded isolated framework [benzil@{Zn4(dipp)4(BIPYMO)2}]n (7) has been isolated as single crystals, and its crystal structure determination revealed the binding of benzil molecules to the framework through strong π-π interactions.

N-Heterocyclic carbene catalysed 1,6-hydrophosphonylation of p-quinone methides and fuchsones: an atom economical route to unsymmetrical diaryl- and triarylmethyl phosphonates

A direct method for the synthesis of diaryl- and triarylmethyl phosphonates through 1,6-hydrophosphonylation ofp-quinone methides and fuchsones using NHC as a Brønsted base catalyst is described.

Alkylzinc diorganophosphates: synthesis, structural diversity and unique ability to incorporate zincoxane units

New tetrameric alkylzinc organophosphates of a drum-like structure and novel aggregates based on alkylzinc organophosphates with incorporated zincoxane units were synthesized and structurally characterized.

Octanuclear zinc phosphates with hitherto unknown cluster architectures: ancillary ligand and solvent assisted structural transformations thereof

Structural variations in zinc phosphate cluster chemistry have been achieved through a careful selection of phosphate ligand, ancillary ligand, and solvent medium. The use of 4-haloaryl phosphates (X-dippH2) as phosphate source in conjunction with 2-hydroxypyridine (hpy) ancillary ligand in acetonitrile solvent resulted in the isolation of the first examples of octameric zinc phosphates [Zn8(X-dipp)8(hpy)4(CH3CN)2(H2O)2]·4H2O (X = Cl 2, Br 3) and not the expected tetranuclear D4R cubane clusters. Use of 2,3-dihydroxypyridine (dhpy) as ancillary ligand, under otherwise similar reaction conditions with the same set of phosphate ligands and solvent, resulted in isolation of another type of octanuclear zinc phosphate clusters {[(Zn8(X-dipp)4(X-dippH)4(dhpyH)4(dhpyH2)2(H2O)2]·2solvent} (X = Cl, solvent = MeCN 4; Br, solvent = H2O 5), as the only isolated products. X-ray crystal diffraction studies reveal that 2 and 3 are octanuclear clusters that are essentially formed by edge fusion of two D4R zinc phosphates. Although 4 and 5 are also octanuclear clusters, they exhibit a completely different cluster architecture and have been presumably formed by the ability of 2,3-dihydroxypyridine to bridge zinc centers in addition to the X-dipp ligands. Dissolution of both types of octanuclear clusters in DMSO followed by crystallization yields D4R cubanes [Zn(X-dipp)(DMSO)]4 (X = Cl 6, Br 7), in which the ancillary ligands such as hpy, H2O, and CH3CN originally present on the zinc centers of 2-5 have been replaced by DMSO. DFT calculations carried out to understand the preference of Zn8 versus Zn4 clusters in different solvent media reveal that use of CH3CN as solvent favors the formation of fused cubanes of the type 2 and 3, whereas use of DMSO as the solvent medium promotes the formation of D4R structures of the type 6 and 7. The calculations also reveal that the vacant exocluster coordination sites on the zinc centers at the bridgehead positions prefer coordination by water to hpy or CH3CN. Interestingly, the initially inaccessible D4R cubanes [Zn(X-dipp)(hpy)]4·2MeCN (X = Cl 8, Br 9) could be isolated as the sole products from the corresponding DMSO-decorated cubanes 6 and 7 by combining them with hpy in CH3CN.

Synthetic strategies to achieve further-functionalised monoaryl phosphate primary building units: crystal structures and solid-state aggregation behavior

The synthesis of a new class of functionalized organophosphates, potential building units in materials and zeolite chemistry, has been reported.

Discrete and polymeric cobalt organophosphates: isolation of a 3-D cobalt phosphate framework exhibiting selective CO2 capture

Auxiliary ligand assisted control over the structural diversity has been achieved in the case of cobalt(ii) organophosphates.

2,6-Dimethylphenol derived H-phosphonate and α-hydroxyphosphonate: facile synthesis, crystal chemistry, supramolecular association and metal complexation

A H-phosphonate and an α-hydroxyarylphosphonate with active P–H and P–OH groups have been synthesized from 2,6-dimethylphenol and their aggregation behavior has been investigated.

Single molecule magnet behaviour in a {Dy4P2} octahedron

Two new {Ln₄} cages are reported, bridged by phosphonate ligands. The anisotropy axes at the Dy(iii) sites are aligned, leading to slow relaxation of magnetisation.

Synthesis of heteroboroxines with MB₂O₃ core (M = Sb, Bi, Sn)--an influence of the substitution of parent boronic acids

The synthesis and structure of stiba-, stanna- and bismaheteroboroxines of a general formula L(E)M[(OBR)2O] supported by a N,C,N-chelating ligand L [where L = C6H3-2,6-(CH2NMe2)2, M, E = Sb, lone pair or Sn, Ph or Bi, lone pair] is reported. The target compounds are prepared by straightforward one-step reactions between oxides (LMO)2 (M = Sb or Bi) or organotin(iv) carbonate L(Ph)Sn(CO3) with four or two molar equivalents of corresponding organoboronic acid. All compounds were characterized with the help of elemental analysis, multinuclear NMR spectroscopy and on several occasions the molecular structure was determined using single-crystal X-ray diffraction analysis. The influence of both the substitution of the parent organoboronic acid and the central atom used on the feasibility of the condensation reaction was addressed. Furthermore, several heteroboroxines containing nitrogen donor functionality (i.e. NH2, NMe2, CN or 4-pyridyl) included in the boronic acid residue were synthesized and characterized with the aim to prepare boroxine-based covalent frameworks (through intermolecular N→B interactions) containing metal atoms in their structures. Although no such intermolecular bonding was detected in solution of these compounds, it was shown that the organotin(iv) heteroboroxine substituted by 4-pyridyl group forms an infinite polymeric chains via N→B interactions in the solid state. This polymer collapsed back to monomeric units upon dissolution.