In Situ SVVYGLR Peptide Conjugation into Injectable Gelatin-Poly(ethylene glycol)-Tyramine Hydrogel via Enzyme-Mediated Reaction for Enhancement of Endothelial Cell Activity and Neo-Vascularization

Injectable hydrogels as emerging drug-delivery platforms for tumor therapy

Tumor therapy continues to be a prominent field within biomedical research. The development of various drug carriers has been propelled by concerns surrounding the side effects and targeting efficacy of various chemotherapeutic drugs and other therapeutic agents. These carriers strive to enhance drug concentration at tumor sites, minimize systemic side effects, and improve therapeutic outcomes. Among the reported delivery systems, injectable hydrogels have emerged as an emerging candidate for the in vivo delivery of chemotherapeutic drugs due to their minimal invasive drug delivery properties. This review systematically summarizes the composition and preparation methodologies of injectable hydrogels and further highlights the delivery mechanisms of diverse drugs using these hydrogels for tumor therapy, along with an in-depth discussion on the optimized therapeutic efficiency of drugs encapsulated within the hydrogels. The work concludes by providing a dynamic forward-looking perspective on the potential challenges and possible solutions of the in situ injectable hydrogels for non-surgical and real-time diagnostic applications.

Peptide-Based Biomaterials for Bone and Cartilage Regeneration

The healing of osteochondral defects (OCDs) that result from injury, osteochondritis, or osteoarthritis and bear lesions in the cartilage and bone, pain, and loss of joint function in middle- and old-age individuals presents challenges to clinical practitioners because of non-regenerative cartilage and the limitations of current therapies. Bioactive peptide-based osteochondral (OC) tissue regeneration is becoming more popular because it does not have the immunogenicity, misfolding, or denaturation problems associated with original proteins. Periodically, reviews are published on the regeneration of bone and cartilage separately; however, none of them addressed the simultaneous healing of these tissues in the complicated heterogeneous environment of the osteochondral (OC) interface. As regulators of cell adhesion, proliferation, differentiation, angiogenesis, immunomodulation, and antibacterial activity, potential therapeutic strategies for OCDs utilizing bone and cartilage-specific peptides should be examined and investigated. The main goal of this review was to study how they contribute to the healing of OCDs, either alone or in conjunction with other peptides and biomaterials.

Liposomal oxygen-generating hydrogel for enhancing cell survival under hypoxia condition

The inadequate oxygen supply to engineered tissues has been a persistent challenge in tissue engineering and regenerative medicine. To overcome this limitation, we developed a scaffold combined with an oxygen-releasing liposomal system comprising catalase-loaded liposomes (CAT@Lip) and H2O2-loaded liposomes (H2O2@Lip). This oxygenation system has shown high cytocompatibility when they were applied to human stromal cells. Under hypoxic conditions, the cell viability enclosed in the oxygen-releasing liposomal alginate hydrogel (94.62 ± 3.46 %) was significantly higher than that of cells enclosed in hydrogel without liposomes (47.18 ± 9.68 %). There was no significant difference in cell viability and apoptosis rate compared to normoxia conditions after three days, indicating the effectiveness of the oxygen-releasing approach in hypoxic conditions. In conclusion, our study demonstrates that the use of liposomal oxygen-releasing scaffolds can overcome the oxygen diffusion challenge in tissue implant fabrication, providing a simple solution for cellular oxygenation that could be a crucial element in tissue engineering.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Injectable hydrogels in central nervous system: Unique and novel platforms for promoting extracellular matrix remodeling and tissue engineering

Repairing central nervous system (CNS) is difficult due to the inability of neurons to recover after damage. A clinically acceptable treatment to promote CNS functional recovery and regeneration is currently unavailable. According to recent studies, injectable hydrogels as biodegradable scaffolds for CNS tissue engineering and regeneration have exceptionally desirable attributes. Hydrogel has a biomimetic structure similar to extracellular matrix, hence has been considered a 3D scaffold for CNS regeneration. An interesting new type of hydrogel, injectable hydrogels, can be injected into target areas with little invasiveness and imitate several aspects of CNS. Injectable hydrogels are being researched as therapeutic agents because they may imitate numerous properties of CNS tissues and hence reduce subsequent injury and regenerate neural tissue. Because of their less adverse effects and cost, easier use and implantation with less pain, and faster regeneration capacity, injectable hydrogels, are more desirable than non-injectable hydrogels. This article discusses the pathophysiology of CNS and the use of several kinds of injectable hydrogels for brain and spinal cord tissue engineering, paying particular emphasis to recent experimental studies.

Enzymatic co-crosslinking of star-shaped poly(ethylene glycol) tyramine and hyaluronic acid tyramine conjugates provides elastic biocompatible and biodegradable hydrogels

A combination of the viscoelastic properties of hyaluronic acid (HA) and the elastic properties of star shaped 8-arm poly(ethylene glycol) (8-arm PEG) was used to design in-situ forming hydrogels. Hydrogels were prepared by the enzymatic crosslinking of a partially tyramine modified 8-arm PEG and a tyramine conjugated HA using horseradish peroxidase in the presence of hydrogen peroxide. Hydrogels of the homopolymer conjugates and mixtures thereof were rapidly formed within seconds under physiological conditions at low polymer and enzyme concentrations. Elastic hydrogels with high gel content (≥95%) and high storage moduli (up to 22.4 kPa) were obtained. An in vitro study in the presence of hyaluronidase (100 U/mL) revealed that with increasing PEG content the degradation time of the hybrid hydrogels increased up to several weeks, whereas hydrogels composed of only hyaluronic acid degraded within 2 weeks. Human mesenchymal stem cells (hMSCs) incorporated in the hybrid hydrogels remained viable as shown by a PrestoBlue and a live-dead assay, confirming the biocompatibility of the constructs. The production of an extracellular matrix by re-differentiation of encapsulated human chondrocytes was followed over a period of 28 days. Gene expression indicated that these highly elastic hydrogels induced an enhanced production of collagen type II. At low PEG-TA/HA-TA ratios a higher expression of SOX 9 and ACAN was observed. These results indicate that by modulating the ratio of PEG/HA, injectable hydrogels can be prepared applicable as scaffolds for tissue regeneration applications.

Fabrication and Bioactivity of Peptide-Conjugated Biomaterial Tissue Engineering Constructs

Tissue engineering combines materials engineering, cells and biochemical factors to improve, restore or replace various types of biological tissues. A nearly limitless combination of these strategies can be combined, providing a means to augment the function of a number of biological tissues such as skin tissue, neural tissue, bones, and cartilage. Compounds such as small molecule therapeutics, proteins, and even living cells have been incorporated into tissue engineering constructs to influence biological processes at the site of implantation. Peptides have been conjugated to tissue engineering constructs to circumvent limitations associated with conjugation of proteins or incorporation of cells. This review highlights various contemporary examples in which peptide conjugation is used to overcome the disadvantages associated with the inclusion of other bioactive compounds. This review covers several peptides that are commonly used in the literature as well as those that do not appear as frequently to provide a broad scope of the utility of the peptide conjugation technique for designing constructs capable of influencing the repair and regeneration of various bodily tissues. Additionally, a brief description of the construct fabrication techniques encountered in the covered examples and their advantages in various tissue engineering applications is provided.

Enzymatically crosslinked hydrogel based on tyramine modified gelatin and sialylated chitosan

The enzymatically crosslinked hydrogel could replicate the cellular microenvironment for biomedical applications. In the present study, to improve the cytocompatibility of chitosan (CS), sialic acid (SA) was introduced to CS to synthesize sialylated CS (CS-SA), and the tyramine (TA) was grafted to gelatin (G) to obtain TA modified gelatin (G-TA). The successful synthesis of CS-SA and G-TA was confirmed using¹H NMR and UV-Vis absorption spectra. The interpenetrating polymer networks G-TA/CS-SA (GC) hydrogel was then fabricated via blending G-TA and CS-SA solutions and crosslinked using horseradish peroxidase. The storage modulus (G') of the fabricated GC hydrogels with different ratios of G-TA/CS-SA greatly varied during the formation and strain of hydrogels. With the increase of CS-SA concentration from 0% to 2%, the storage modulus of GC hydrogels was also observed to decrease from 1500 Pa to 101 Pa; the water uptake capacity of GC hydrogels increased from 1000% to 4500%. Additionally, the cell counting kit-8 and fluorescent images demonstrated the excellent cytocompatibility of GC hydrogels after culturing with NIH 3T3 cells. The obtained results indicated that the fabricated GC hydrogels might have potential in biomedical fields, such as wound dressing.

Strategy for improving cell-mediated vascularized soft tissue formation in a hydrogen peroxide-triggered chemically-crosslinked hydrogel

The physically-crosslinked collagen hydrogels can provide suitable microenvironments for cell-based functional vascular network formation due to their biodegradability, biocompatibility, and good diffusion properties. However, encapsulation of cells into collagen hydrogels results in extensive contraction and rapid degradation of hydrogels, an effect known from their utilization as a pre-vascularized graft in vivo. Various types of chemically-crosslinked collagen-based hydrogels have been successfully synthesized to decrease volume contraction, retard the degradation rate, and increase mechanical tunability. However, these hydrogels failed to form vascularized tissues with uniformly distributed microvessels in vivo. Here, the enzymatically chemically-crosslinked collagen-Phenolic hydrogel was used as a model to determine and overcome the difficulties in engineering vascular networks. Results showed that a longer duration of inflammation and excessive levels of hydrogen peroxide limited the capability for blood vessel forming cells-mediated vasculature formation in vivo. Lowering the unreacted amount of crosslinkers reduced the densities of infiltrating host myeloid cells by half on days 2–4 after implantation, but blood vessels remained at low density and were mainly located on the edge of the implanted constructs. Co-implantation of a designed spacer with cell-laden hydrogel maintained the structural integrity of the hydrogel and increased the degree of hypoxia in embedded cells. These effects resulted in a two-fold increase in the density of perfused blood vessels in the hydrogel. Results agreed with computer-based simulations. Collectively, our findings suggest that simultaneous reduction of the crosslinker-induced host immune response and increase in hypoxia in hydrogen peroxide-triggered chemically-crosslinked hydrogels can effectively improve the formation of cell-mediated functional vascular networks.

Recent advances in design and applications of biomimetic self-assembled peptide hydrogels for hard tissue regeneration

Abstract

The development of natural biomaterials applied for hard tissue repair and regeneration is of great importance, especially in societies with a large elderly population. Self-assembled peptide hydrogels are a new generation of biomaterials that provide excellent biocompatibility, tunable mechanical stability, injectability, trigger capability, lack of immunogenic reactions, and the ability to load cells and active pharmaceutical agents for tissue regeneration. Peptide-based hydrogels are ideal templates for the deposition of hydroxyapatite crystals, which can mimic the extracellular matrix. Thus, peptide-based hydrogels enhance hard tissue repair and regeneration compared to conventional methods. This review presents three major self-assembled peptide hydrogels with potential application for bone and dental tissue regeneration, including ionic self-complementary peptides, amphiphilic (surfactant-like) peptides, and triple-helix (collagen-like) peptides. Special attention is given to the main bioactive peptides, the role and importance of self-assembled peptide hydrogels, and a brief overview on molecular simulation of self-assembled peptide hydrogels applied for bone and dental tissue engineering and regeneration.

Graphic abstract

Tunable and high tissue adhesive properties of injectable chitosan based hydrogels through polymer architecture modulation

Chitosan-based hydrogels have been widely used for various biomedical applications due to their versatile properties such as biocompatibility, biodegradability, muco-adhesiveness, hemostatic effect and so on. However, the inherent rigidity and brittleness of pure chitosan hydrogels are still unmanageable, which has limited their potential use in biomaterial research. In this study, we developed in situ forming chitosan/PEG hydrogels with improved mechanical properties, using the enzymatic crosslinking reaction of horseradish peroxidase (HRP). The effect of PEG on physico-chemical properties of hybrid hydrogels was thoroughly elucidated by varying the content (0-100 %), molecular weight (4, 10 and 20 kDa) and geometry (linear, 4-arm) of the PEG derivatives. The resulting hydrogels demonstrated excellent hemostatic ability and are highly biocompatible in vivo, comparable to commercially available fibrin glue. We suggest these chitosan/PEG hybrid hydrogels with tunable physicochemical and tissue adhesive properties have great potential for a wide range of biomedical applications in the near future.

Osteopontin sequence modified mesoporous calcium silicate scaffolds to promote angiogenesis in bone tissue regeneration

Sufficient blood supply remains the key issue to be addressed for an optimal performance of implanted bone tissue engineering scaffolds. Host vessel invasion is limited to a depth of only several hundred micrometers from the scaffold/host interface. In this study, an osteopontin sequenced polypeptide SVVYGLR was grafted into/onto mesoporous calcium silicate (MCS) and then 3D-printed into scaffolds. The peptide motifs can be accessed on the scaffold surfaces and released as well. In vitro studies of human umbilical vein endothelial cells (HUVECs) indicated enhanced cell adhesion and vascular-like structure formation on MCS-SVVYGLR scaffolds. At the same time, human bone marrow stromal cells (hBMSCs) showed enhanced osteogenic differentiation capability and higher expression levels of angiogenic genes and proteins as well. The results of in vivo radial defect repair tests of rabbits showed that more tubular vessels formed throughout the whole MCS-SVVYGLR scaffolds, and therefore, a more homogeneous new bone formation pattern was obtained on MCS-SVVYGLR scaffolds instead of a peripheral bone growth pattern on pure MCS scaffolds by Micro-CT and tissue staining techniques over 3 months. Relative gene and protein expressions in PI3K/AKT and ERK1/2 pathways suggested that the SVVYGLR motif on the MCS scaffold surface could initiate the PI3K/AKT signaling pathway and up-regulate ERK1/2 expression, which positively stimulated VEGF expression, to improve angiogenesis.

The application of bone marrow mesenchymal stem cells and biomaterials in skeletal muscle regeneration

Skeletal muscle injuries have bothered doctors and caused great burdens to the public medical insurance system for a long time. Once injured, skeletal muscles usually go through the processes of inflammation, repairing and remodeling. If repairing and remodeling stages are out of balance, scars will be formed to replace injured skeletal muscles. At present, clinicians usually use conventional methods to restore the injured skeletal muscles, such as flap transplantation. However, flap transplantation sometimes needs to sacrifice healthy autologous tissues and will bring extra harm to patients. In recent years, stem cells-based tissue engineering provides us new treatment ideas for skeletal muscle injuries. Stem cells are cells with multiple differentiation potential and have ability to differentiate into adult cells under special condition. Skeletal muscle tissues also have stem cells, called satellite cells, but they are in small amount and new muscle fibers that derived from them may not be enough to replace injured fibers. Bone marrow mesenchymal stem cells (BM-MSCs) could promote musculoskeletal tissue regeneration and activate the myogenic differentiation of satellite cells. Biomaterial is another important factor to promote tissue regeneration and greatly enhance physiological activities of stem cells in vivo. The combined use of stem cells and biomaterials will gradually become a mainstream to restore injured skeletal muscles in the future. This review article mainly focuses on the review of research about the application of BM-MSCs and several major biomaterials in skeletal muscle regeneration over the past decades.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Multicomponent hydrogels for the formation of vascularized bone-like constructs in vitro

The native extracellular matrix (ECM) is a complex gel-like system with a broad range of structural features and biomolecular signals. Hydrogel platforms that can recapitulate the complexity and signaling properties of this ECM would have enormous impact in fields ranging from tissue engineering to drug discovery. Here, we report on the design, synthesis, and proof-of-concept validation of a microporous and nanofibrous hydrogel exhibiting multiple bioactive epitopes designed to recreate key features of the bone ECM. The material platform integrates self-assembly with orthogonal enzymatic cross-linking to create a supramolecular environment comprising hyaluronic acid modified with tyramine (HA-Tyr) and peptides amphiphiles (PAs) designed to promote cell adhesion (RGDS-PA), osteogenesis (Osteo-PA), and angiogenesis (Angio-PA). Through individual and co-cultures of human adipose derived mesenchymal stem cells (hAMSCs) and human umbilical vascular endothelial cells (HUVECs), we confirmed the capacity of the HA-Tyr/RGDS-PA/Osteo-PA/Angio-PA hydrogel to promote cell adhesion as well as osteogenic and angiogenic differentiation in both 2D and 3D setups. Furthermore, using immunofluorescent staining and reverse transcription-quantitative polymerase chain reaction (RT-qPCR), we demonstrated co-differentiation and organization of hAMSCs and HUVECs into 3D aggregates resembling vascularized bone-like constructs. STATEMENT OF SIGNIFICANCE: This body of work presents a new approach to develop more complex, yet functional, in vitro environments for cell culture while enabling a high level of control, tuneability, and reproducibility. The multicomponent self-assembling bioactive 2D and 3D hydrogels with nanofibrous architecture designed to recreate key molecular and macromolecular features of the native bone ECM and promote both osteogenesis and angiogenesis. The materials induce endothelial cells towards large vascular lumens and MSCs into bone cells on/within the same platform and form vascularized-bone like construct in vitro. This strategy looks encouraging for lifelike bone tissue engineering in vitro and bone tissue regeneration in vivo.

Enzymatically crosslinked silk and silk-gelatin hydrogels with tunable gelation kinetics, mechanical properties and bioactivity for cell culture and encapsulation

Silk fibroin (SF) was enzymatically crosslinked with tyramine-substituted silk fibroin (SF-TA) or gelatin (G-TA) to fabricate hybrid hydrogels with tunable gelation kinetics, mechanical properties and bioactivity. Horseradish peroxidase (HRP)/hydrogen peroxide (H2O2) mediated crosslinking of SF in physiological buffers results in slow gelation and limited mechanical properties. Moreover, SF lacks cell attachment sequences, leading to poor cell-material interactions. These shortcomings can limit the uses of enzymatically crosslinked silk hydrogels in injectable tissue fillings, 3D bioprinting or cell microencapsulation, where rapid gelation and high bioactivity are desired. Here SF/SF-TA and SF/G-TA composite hydrogels were characterized for hydrogel properties and the influence of conjugated cyclic arginine-glycine-aspartic acid (RGD) peptide or G-TA content on bioactivity was explored. Both SF-TA and G-TA significantly increased gelation kinetics, improved mechanical properties and delayed enzymatic degradation in a concentration-dependent manner. β-Sheet formation and hydrogel stiffening were accelerated by SF-TA content but delayed by G-TA. Both cyclic RGD and G-TA significantly improved morphology and metabolic activity of human mesenchymal stem cells (hMSCs) cultured on or encapsulated in composite hydrogels. The hydrogel formulations introduced in this study provide improved control of gel formation and properties, along with biocompatible systems that can be utilized in tissue engineering and cell delivery applications.

Achieving Controlled Biomolecule-Biomaterial Conjugation

The conjugation of biomolecules can impart materials with the bioactivity necessary to modulate specific cell behaviors. While the biological roles of particular polypeptide, oligonucleotide, and glycan structures have been extensively reviewed, along with the influence of attachment on material structure and function, the key role played by the conjugation strategy in determining activity is often overlooked. In this review, we focus on the chemistry of biomolecule conjugation and provide a comprehensive overview of the key strategies for achieving controlled biomaterial functionalization. No universal method exists to provide optimal attachment, and here we will discuss both the relative advantages and disadvantages of each technique. In doing so, we highlight the importance of carefully considering the impact and suitability of a particular technique during biomaterial design.

Visible Light-Induced Hydrogelation of an Alginate Derivative and Application to Stereolithographic Bioprinting Using a Visible Light Projector and Acid Red

Visible light-induced hydrogelation is attractive for various biomedical applications. In this study, hydrogels of alginate with phenolic hydroxyl groups (Alg-Ph) were obtained by irradiating a solution containing the polymer, ruthenium II trisbipyridyl chloride ([Ru(bpy)₃]²⁺) and sodium persulfate (SPS), with visible light. The hydrogelation kinetics and the mechanical properties of the resultant hydrogels were tunable by controlling the intensity of the light and the concentrations of [Ru(bpy)₃]²⁺ and SPS. With appropriate concentrations of [Ru(bpy)₃]²⁺ and SPS, the hydrogel could be obtained following approximately 10 s of irradiation using a normal desktop lamp. The hydrogelation process and the resultant hydrogel were cytocompatible; mouse fibroblast cells enclosed in the Alg-Ph hydrogel maintained more than 90% viability for 1 week. The solution containing Alg-Ph, [Ru(bpy)₃]²⁺ and SPS was useful as a bioink for stereolithographic bioprinting. Cell-laden hydrogel constructs could be printed using the bioprinting system equipped with a visible light projector without a significant decrease in cell viability in the presence of photoabsorbent Acid Red 18. The hydrogel construct including a perfusable helical lumen of 1 mm in diameter could be fabricated using the printing system. These results demonstrate the significant potential of this visible light-induced hydrogelation system and the stereolithographic bioprinting using the hydrogelation system for tissue engineering and regenerative medicine.

The use of bioactive peptides to modify materials for bone tissue repair

It has been well recognized that the modification of biomaterials with appropriate bioactive peptides could further enhance their functions. Especially, it has been shown that peptide-modified bone repair materials could promote new bone formation more efficiently compared with conventional ones. The purpose of this article is to give a general review of recent studies on bioactive peptide-modified materials for bone tissue repair. Firstly, the main peptides for inducing bone regeneration and commonly used methods to prepare peptide-modified bone repair materials are introduced. Then, current in vitro and in vivo research progress of peptide-modified composites used as potential bone repair materials are reviewed and discussed. Generally speaking, the recent related studies have fully suggested that the modification of bone repair materials with osteogenic-related peptides provide promising strategies for the development of bioactive materials and substrates for enhanced bone regeneration and the therapy of bone tissue diseases. Furthermore, we have proposed some research trends in the conclusion and perspectives part.

Injectable hydrogels for cartilage and bone tissue engineering

Tissue engineering has become a promising strategy for repairing damaged cartilage and bone tissue. Among the scaffolds for tissue-engineering applications, injectable hydrogels have demonstrated great potential for use as three-dimensional cell culture scaffolds in cartilage and bone tissue engineering, owing to their high water content, similarity to the natural extracellular matrix (ECM), porous framework for cell transplantation and proliferation, minimal invasive properties, and ability to match irregular defects. In this review, we describe the selection of appropriate biomaterials and fabrication methods to prepare novel injectable hydrogels for cartilage and bone tissue engineering. In addition, the biology of cartilage and the bony ECM is also summarized. Finally, future perspectives for injectable hydrogels in cartilage and bone tissue engineering are discussed.

Enzymatic in situ formed hydrogel from gelatin-tyramine and chitosan-4-hydroxylphenyl acetamide for the co-delivery of human adipose-derived stem cells and platelet-derived growth factor towards vascularization

An injectable, in situ forming hydrogel system capable of co-delivering human adipose-derived stem cells (hADSC) and platelet-derived growth factor (PDGF) was investigated as a new system for tissue engineering, envisaged to support vascularization. The system consists of tyramine-conjugated gelatin and hydroxyphenyl acetamide chitosan derivative. Both are soluble and stable at physiologic conditions, which is a key factor for retaining viable cells and active growth factor. In situ gelation involved enzymatic crosslinking using horseradish peroxidase as a catalyst and hydrogen peroxide as an oxidant. Gel formation occurred within 30-90 s by controlling the concentration of polymers. PDGF release showed adequate release kinetics within the intended period of time and hADSC showed good compatibility with the hydrogel formulation based on the in vitro assay and subcutaneous implantation into BALB/c-nu/nu nude female mice. Immunohistochemical analysis confirmed viability of delivered hADSC. Histological analysis showed no immune reaction and confirmed blood vessel formation. The results implicate the hydrogel as a promising delivery vehicle or carrier of both cell and growth factor, which support vascularization for tissue engineering applications.

Oxidized cyclodextrin-functionalized injectable gelatin hydrogels as a new platform for tissue-adhesive hydrophobic drug delivery

Dual-functional injectable gelatin-based hydrogels utilizing oxidized β-cyclodextrin show high adhesiveness and hydrophobic drug supply.

Pericyte Seeded Dual Peptide Scaffold with Improved Endothelialization for Vascular Graft Tissue Engineering

The development of synthetic vascular grafts for coronary artery bypass is challenged by insufficient endothelialization, which increases the risk of thrombosis, and the lack of native cellular constituents, which favors pathological remodeling. Here, a bifunctional electrospun poly(ε-caprolactone) (PCL) scaffold with potential for synthetic vascular graft applications is presented. This scaffold incorporates two tethered peptides: the osteopontin-derived peptide (Adh) on the "luminal" side and a heparin-binding peptide (Hep) on the "abluminal" side. Additionally, the "abluminal" side of the scaffold is seeded with saphenous vein-derived pericytes (SVPs) as a source of proangiogenic growth factors. The Adh peptide significantly increases endothelial cell adhesion, while the Hep peptide promotes accumulation of vascular endothelial growth factor secreted by SVPs. SVPs increase endothelial migration both in a transwell assay and a modified scratch assay performed on the PCL scaffold. Seeding of SVPs on the "abluminal"/Hep side of the scaffold further increases endothelial cell density, indicating a combinatory effect of the peptides and pericytes. Finally, SVP-seeded scaffolds are preserved by freezing in a xeno-free medium, maintaining good cell viability and function. In conclusion, this engineered scaffold combines patient-derived pericytes and spatially organized functionalities, which synergistically increase endothelial cell density and growth factor retention.

The role of peptides in bone healing and regeneration: a systematic review

BACKGROUND

Bone tissue engineering and the research surrounding peptides has expanded significantly over the last few decades. Several peptides have been shown to support and stimulate the bone healing response and have been proposed as therapeutic vehicles for clinical use. The aim of this comprehensive review is to present the clinical and experimental studies analysing the potential role of peptides for bone healing and bone regeneration.

METHODS

A systematic review according to PRISMA guidelines was conducted. Articles presenting peptides capable of exerting an upregulatory effect on osteoprogenitor cells and bone healing were included in the study.

RESULTS

Based on the available literature, a significant amount of experimental in vitro and in vivo evidence exists. Several peptides were found to upregulate the bone healing response in experimental models and could act as potential candidates for future clinical applications. However, from the available peptides that reached the level of clinical trials, the presented results are limited.

CONCLUSION

Further research is desirable to shed more light into the processes governing the osteoprogenitor cellular responses. With further advances in the field of biomimetic materials and scaffolds, new treatment modalities for bone repair will emerge.

Fabrication, characterization, and in vitro evaluation of silver-containing arabinoxylan foams as antimicrobial wound dressing

Arabinoxylan ferulate (AXF) foams were fabricated via enzymatic peroxidase/hydrogen peroxide crosslinking reaction followed by freeze-drying and studied as a potential wound dressing material. The AXF foam's rheological, morphological, porous, and swelling properties were examined. AXF foams were found to be a viscoelastic material that proved to be highly porous and water absorbent. AXF foams possessed low endotoxin levels and were cytocompatible with fibroblasts. Silver was successfully integrated into AXF foams and slowly released over 48 h. AXF foams impregnated with silver demonstrated efficacy inhibiting bacterial growth according to a modified Kirby-Bauer disk diffusion susceptibility test. Overall, AXF foams possess appropriate material properties and the silver-loaded AXF foams showed antimicrobial activity necessary to be a candidate material in wound dressing development. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2456-2465, 2016.

Surface bound VEGF mimicking peptide maintains endothelial cell proliferation in the absence of soluble VEGF in vitro

Continuous glucose monitoring is an efficient method for the management of diabetes and in limiting the complications induced by large fluctuations in glucose levels. For this, intravascular systems may assist in producing more reliable and accurate devices. However, neovascularization is a key factor to be addressed in improving their biocompatibility. In this scope, the perennial modification of the surface of an implant with the proangiogenic Vascular Endothelial Growth Factor mimic peptide (SVVYGLR peptide sequence) holds great promise. Herein, we report on the preparation of gold substrates presenting the covalently grafted SVVYGLR peptide sequence and their effect on HUVEC behavior. Effective coupling was demonstrated using XPS and PM-IRRAS. The produced surfaces were shown to be beneficial for HUVEC adhesion. Importantly, surface bound SVVYGLR is able to maintain HUVEC proliferation even in the absence of soluble VEGF. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1425-1436, 2016.

Dual growth factor-loaded in situ gel-forming bulking agent: passive and bioactive effects for the treatment of urinary incontinence

Stress urinary incontinence (SUI) is one of the major medical problems for adult females and has a devastating effect on their quality of life. The major cause of the development of the SUI is dysfunction of the urethral supporting tissues as a result of aging and childbirth. In this study, in situ gel-forming bulking agent loaded with dual growth factors, nerve growth factor (NGF) and basic fibroblast growth factor (bFGF), was fabricated. The bulking agent consisted of three components; (i) polycaprolactone (PCL) beads, (ii) bFGF-loaded nanogels, and (iii) NGF-loaded in situ gel forming solution. The bulking agent can provide an initial passive bulking effect (from the PCL beads) and regenerate malfunctioning tissues around the urethra (from the sequential and continuous release of growth factors from the hydrogel) for the effective treatment of SUI. The PCL beads were located stably at the applied urethra site (urinary incontinent SD rat) without migration to provide a passive bulking effect. The sequential release of the growth factors (NGF within a week and bFGF for more than 4 weeks) from the bulking agent provided regeneration of damaged nerve and smooth muscle, and thus enhanced biological function around the urethra. From the findings, we suggest that dual growth factor (NGF and bFGF)-loaded in situ gel-forming bulking agent may be a promising injectable bioactive system for the treatment for SUI.

Micro- and nanogels with labile crosslinks – from synthesis to biomedical applications

We emphasize the synthetic strategies to produce micro-/nanogels and the importance of degradable linkers incorporated in the gel network.

Horseradish peroxidase-catalysed in situ-forming hydrogels for tissue-engineering applications

In situ-forming hydrogels are an attractive class of implantable biomaterials that are used for biomedical applications. These injectable hydrogels are versatile and provide a convenient platform for delivering cells and drugs via minimally invasive surgery. Although several crosslinking methods for preparing in situ forming hydrogels have been developed over the past two decades, most hydrogels are not sufficiently versatile for use in a wide variety of tissue-engineering applications. In recent years, enzyme-catalysed crosslinking approaches have been emerged as a new approach for developing in situ-forming hydrogels. In particular, the horseradish peroxidase (HRP)-catalysed crosslinking approach has received increasing interest, due to its highly improved and tunable capacity to obtain hydrogels with desirable properties. The HRP-catalysed crosslinking reaction immediately occurs upon mixing phenol-rich polymers with HRP and hydrogen peroxide (H2O2) in aqueous media. Based on this unique gel-forming feature, recent studies have shown that various properties of formed hydrogels, such as gelation time, stiffness and degradation rate, can be easily manipulated by varying the concentrations of HRP and H2O2. In this review, we outline the versatile properties of HRP-catalysed in situ-forming hydrogels, with a brief introduction to the crosslinking mechanisms involved. In addition, the recent biomedical applications of HRP-catalysed in situ-forming hydrogels for tissue regeneration are described.

Enzymatic conjugation of a bioactive peptide into an injectable hyaluronic acid-tyramine hydrogel system to promote the formation of functional vasculature

In this study, one-step enzyme-mediated preparation of a multi-functional injectable hyaluronic-acid-based hydrogel system is reported. Hydrogel was formed through the in situ coupling of phenol moieties by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2), and bioactive peptides were simultaneously conjugated into the hydrogel during the gel formation process. The preparation of this multi-functional hydrogel was made possible by synthesizing peptides containing phenols which could couple with the phenol moieties of hyaluronic-acid-tyramine (HA-Tyr) during the HRP-mediated crosslinking reaction. Preliminary studies demonstrated that two phenol moieties per molecule resulted in a consistently high degree of conjugation into the HA-Tyr hydrogel network, unlike the one modified with one phenol moiety per molecule. Therefore, an Arg-Gly-Asp (RGD) peptide bearing two phenol moieties (phenol2-poly(ethylene glycol)-RGD) was designed for conjugation to endow the HA-Tyr hydrogel with adhesion signals and enhance its bioactivities. Human umbilical vein endothelial cells (HUVECs) cultured on or within the RGD-modified hydrogels showed significantly different adhesion behavior, from non-adherence on the HA-Tyr hydrogel to strong adhesion on hydrogels modified with phenol2-poly(ethylene glycol)-RGD. This altered cell adhesion behavior led to improved cell proliferation, migration and formation of capillary-like network in the hydrogel in vitro. More importantly, when HUVECs and human fibroblasts (HFF1) were encapsulated together in the RGD-modified HA-Tyr hydrogel, functional vasculature was observed inside the cell-laden gel after 2weeks in the subcutaneous tissue. Taken together, the in situ conjugation of phenol2-poly(ethylene glycol)-RGD into HA-Tyr hydrogel system, coupled with the ease of incorporating cells, offers a simple and effective means to introduce biological signals for preparation of multi-functional injectable hydrogels for tissue engineering application.

Combined effects of brain-derived neurotrophic factor immobilized poly-lactic-co-glycolic acid membrane with human adipose-derived stem cells and basic fibroblast growth factor hydrogel on recovery of erectile dysfunction

Erectile dysfunction (ED) is the most frequent long-term problem after radical prostatectomy. We aimed to evaluate whether the use of combination therapy with basic fibroblast growth factor (bFGF)-hydrogel on corpus cavernosum and with adipose-derived stem cells (ADSCs) and brain-derived neurotrophic factor (BDNF)-immobilized poly-lactic-co-glycolic acid (PLGA) membrane on the cavernous nerve (CN) could improve erectile function in a rat model of bilateral cavernous nerve crush injury (BCNI). Rats were randomly divided into five groups (n=15 per group): a normal group (N group), a group receiving saline application after bilateral cavernous nerve crush injury (BCNI), a group undergoing bFGF-hydrogel injection in the corpus cavernosum after BCNI (bFGF), a group receiving ADSC application covered with BDNF-membrane after BCNI (ADSC/BDNF), and a group undergoing coadministration of bFGF-hydrogel injection and BDNF-membrane with ADSCs after BDNF (bFGF+ADSC/BDNF). Four weeks postoperatively, the erectile function was assessed by detecting the ratio of intracavernous pressure (ICP) to mean arterial pressure (MAP). Smooth muscle and collagen contents were measured using Masson's trichrome staining. Neuronal nitric oxide synthase (nNOS) expression in the dorsal penile nerve was detected by immunostaining. The protein expression of the α-smooth muscle actin (α-SMA) and the cyclic guanosine monophosphate (cGMP) level of the corpus cavernosum were quantified by western blot and cGMP assay, respectively. In the bFGF+ADSC/BDNF group, the erectile function was significantly elevated compared with the BCNI and other treated groups and showed a significantly increased smooth muscle/collagen ratio, nNOS content, α-SMA expression, and cGMP level. In particular, there were no statistical differences in the ICP/MAP ratio, smooth muscle/collagen ratio, and α-SMA and cGMP levels between the bFGF+ADSC/BDNF group and normal group. Application of the BDNF-immobilized PLGA membrane with human ADSC into the CN and bFGF-incorporated hydrogel into the corpus carvernosum improved nearly normal erectile function in a rat model of postprostatectomy ED. This result suggests that a combined application of bFGF+ADSC/BDNF might be a promising treatment for postprostatectomy ED.

Designing unconventional Fmoc-peptide-based biomaterials: structure and related properties

We have recently employed L-amino acids in the lipase-catalyzed biofabrication of a class of self-assembling Fmoc-peptides that form 3-dimensional nanofiber scaffolds. Here we report that using d-amino acids, the homochiral self-assembling peptide Fmoc-D-Phe3 (Fmoc-F*F*F*) also forms a 3-dimensional nanofiber scaffold that is substantially distinguishable from its L-peptide and heterochiral peptide (F*FF and FF*F*) counterparts on the basis of their physico-chemical properties. Such chiral peptides self-assemble into ordered nanofibers with well defined fibrillar motifs. Circular dichroism and atomic force microscopy have been employed to study in depth such fibrillar peptide structures. Dexamethasone release kinetics from PLGA and CS-PLGA nanoparticles entrapped within the peptidic hydrogel matrix encourage its use for applications in drug controlled release.

Injectable biodegradable hydrogels: progress and challenges

Over the past decades, injectable hydrogels have emerged as promising biomaterials because of their biocompatibility, excellent permeability, minimal invasion, and easy integration into surgical procedures. These systems provide an effective and convenient way to administer a wide variety of bioactive agents such as proteins, genes, and even living cells. Additionally, they can be designed to be degradable and eventually cleared from the body after completing their missions. Given their unique characteristics, injectable biodegradable hydrogels have been actively explored as drug reservoir systems for sustained release of bioactive agents and temporary extracellular matrices for tissue engineering. This review provides an overview of state-of-the-art strategies towards constructing a rational design of injectable biodegradable hydrogels for protein drug delivery and tissue engineering. We also discuss the use of injectable hydrogels for gene delivery systems and biomedical adhesives.