Structure of the protease from simian immunodeficiency virus: complex with an irreversible nonpeptide inhibitor

Water Plays a Cocatalytic Role in Epoxide Ring Opening Reaction in Aspartate Proteases: A QM/MM Study

Aspartate proteases are potential targets for various diseases, and many of their inhibitors are FDA-approved drugs. However, these peptidomimetic and reversibly bound drugs become ineffective upon prolonged use. Attempts have been made to design and synthesize various nonpeptidic epoxide-based irreversible inhibitors to combat the drug-resistance enigma. Here, we study the mechanism of epoxide ring opening in two widely studied aspartate proteases, HIV-1 protease and pepsin. Our results from QM/MM molecular dynamics show that the epoxide ring opening in aspartate proteases follow a two-step mechanism with the formation of an oxyanion intermediate, stabilized by a set of water molecules in the protein active site. These water molecules by virtue of "low-barrier hydrogen bonds" with the epoxide ring reduce the intrinsic reaction barrier while remaining structurally unperturbed, thus playing a cocatalytic role. We validated our results by reproducing the experimentally observed protease/pepsin-epoxide covalent complexes as end products. The observed stability of our oxyanion intermediate in a four-water-coordinated state is also consistent with the reported stable state of the hydroxide ion in water as OH^-(H₂O)₄. Our study could pave the way for the design of new class "HIV protease irreversible inhibitors" from the acquired knowledge of the structures of intermediate and transition states traced during the explored reaction mechanism.

Developing HIV-1 Protease Inhibitors through Stereospecific Reactions in Protein Crystals

Protease inhibitors are key components in the chemotherapy of HIV infection. However, the appearance of viral mutants routinely compromises their clinical efficacy, creating a constant need for new and more potent inhibitors. Recently, a new class of epoxide-based inhibitors of HIV-1 protease was investigated and the configuration of the epoxide carbons was demonstrated to play a crucial role in determining the binding affinity. Here we report the comparison between three crystal structures at near-atomic resolution of HIV-1 protease in complex with the epoxide-based inhibitor, revealing an in-situ epoxide ring opening triggered by a pH change in the mother solution of the crystal. Increased pH in the crystal allows a stereospecific nucleophile attack of an ammonia molecule onto an epoxide carbon, with formation of a new inhibitor containing amino-alcohol functions. The described experiments open a pathway for the development of new stereospecific protease inhibitors from a reactive lead compound.

Peptidase inhibitors in the MEROPS database

The MEROPS website (http://merops.sanger.ac.uk) includes information on peptidase inhibitors as well as on peptidases and their substrates. Displays have been put in place to link peptidases and inhibitors together. The classification of protein peptidase inhibitors is continually being revised, and currently inhibitors are grouped into 67 families based on comparisons of protein sequences. These families can be further grouped into 38 clans based on comparisons of tertiary structure. Small molecule inhibitors are important reagents for peptidase characterization and, with the increasing importance of peptidases as drug targets, they are also important to the pharmaceutical industry. Small molecule inhibitors are now included in MEROPS and over 160 summaries have been written.

HIV-1 protease function and structure studies with the simplicial neighborhood analysis of protein packing method

The Simplicial Neighborhood Analysis of Protein Packing (SNAPP) method was used to predict the effect of mutagenesis on the enzymatic activity of the HIV-1 protease (HIVP). SNAPP relies on a four-body statistical scoring function derived from the analysis of spatially nearest neighbor residue compositional preferences in a diverse and representative subset of protein structures from the Protein Data Bank. The method was applied to the analysis of HIVP mutants with residue substitutions in the hydrophobic core as well as at the interface between the two protease monomers. Both wild-type and tethered structures were employed in the calculations. We obtained a strong correlation, with R(2) as high as 0.96, between DeltaSNAPP score (i.e., the difference in SNAPP scores between wild-type and mutant proteins) and the protease catalytic activity for tethered structures. However, a weaker but significant correlation was obtained for nontethered structures. Our analysis identified residues both in the hydrophobic core and at the dimeric interface that are very important for the protease function. This study demonstrates a potential utility of the SNAPP method for rational design of mutagenesis studies and protein engineering.

Structural insights into the mechanisms of drug resistance in HIV-1 protease NL4-3

The development of resistance to anti-retroviral drugs targeted against HIV is an increasing clinical problem in the treatment of HIV-1-infected individuals. Many patients develop drug-resistant strains of the virus after treatment with inhibitor cocktails (HAART therapy), which include multiple protease inhibitors. Therefore, it is imperative that we understand the mechanisms by which the viral proteins, in particular HIV-1 protease, develop resistance. We have determined the three-dimensional structure of HIV-1 protease NL4-3 in complex with the potent protease inhibitor TL-3 at 2.0 A resolution. We have also obtained the crystal structures of three mutant forms of NL4-3 protease containing one (V82A), three (V82A, M46I, F53L) and six (V82A, M46I, F53L, V77I, L24I, L63P) point mutations in complex with TL-3. The three protease mutants arose sequentially under ex vivo selective pressure in the presence of TL-3, and exhibit fourfold, 11-fold, and 30-fold resistance to TL-3, respectively. This series of protease crystal structures offers insights into the biochemical and structural mechanisms by which the enzyme can overcome inhibition by TL-3 while recovering some of its native catalytic activity.

Functional characterization and crystal structure of the C215D mutant of protein-tyrosine phosphatase-1B

We have characterized the C215D active-site mutant of protein-tyrosine phosphatase-1B (PTP-1B) and solved the crystal structure of the catalytic domain of the apoenzyme to a resolution of 1.6 A. The mutant enzyme displayed maximal catalytic activity at pH approximately 4.5, which is significantly lower than the pH optimum of 6 for wild-type PTP-1B. Although both forms of the enzyme exhibited identical Km values for hydrolysis of p-nitrophenyl phosphate at pH 4.5 and 6, the kcat values of C215D were approximately 70- and approximately 7000-fold lower than those of wild-type PTP-1B, respectively. Arrhenius plots revealed that the mutant and wild-type enzymes displayed activation energies of 61 +/- 1 and 18 +/- 2 kJ/mol, respectively, at their pH optima. Unlike wild-type PTP-1B, C215D-mediated p-nitrophenyl phosphate hydrolysis was inactivated by 1,2-epoxy-3-(p-nitrophenoxy)propane, suggesting a direct involvement of Asp215 in catalysis. Increasing solvent microviscosity with sucrose (up to 40% (w/v)) caused a significant decrease in kcat/Km of the wild-type enzyme, but did not alter the catalytic efficiency of the mutant protein. Structurally, the apoenzyme was identical to wild-type PTP-1B, aside from the flexible WPD loop region, which was in both "open" and "closed" conformations. At physiological pH, the C215D mutant of PTP-1B should be an effective substrate-trapping mutant that can be used to identify cellular substrates of PTP-1B. In addition, because of its insensitivity to oxidation, this mutant may be used for screening fermentation broth and other natural products to identify inhibitors of PTP-1B.

Mutagenesis of the dimer interface residues of tethered and untethered HIV-1 protease result in differential activity and suggest multiple mechanisms of compensation

As is the case for all retroviruses, the protease of HIV-1 is only functional as a homodimer; dimerization of two protease monomers results in the formation of the enzyme active site. This dimer structure is supported primarily by interactions between the first four amino-terminal and the last four carboxy-terminal amino acids. These eight amino acids form a beta-sheet in which hydrophobic residues are oriented towards the core of the molecule and polar residues are directed towards the solvent. Although the structure of the dimer interface has been determined, the forces that support dimerization have not been fully characterized. Here, we describe a tethered construct in which two protease monomers are joined by a 5 amino acid linker. We evaluate the relative role of each dimer interface residue in functional homo- and heterodimers. Our studies indicate that the hydrophobic residues of the dimer interface are particularly important in maintaining enzyme activity and that enzyme activity is more sensitive to substitutions of the C-terminal amino acids. Further, we demonstrate that the presence of the tether is able to compensate for mutations within the dimer interface that inactivate the enzyme.

Structure-based design of AIDS drugs and the development of resistance

AIDS is a major worldwide epidemic spread primarily through contact with infected blood during sexual activity, drug injection, birth, and, rarely now, blood transfusion. More than a dozen drugs for the treatment of AIDS have been introduced in the last 15 years and the process leading to their development offers an excellent example of the progress made in the field of rational drug design. The principal targets of the approved drugs are reverse transcriptase and protease enzymes encoded by the human immunodeficiency virus. In particular, introduction of protease inhibitors has led to a significant decrease of the mortality and morbidity associated with AIDS. My presentation will discuss methods utilized for the development of selected AIDS drugs, primarily protease inhibitors, and the emergence of drug resistance which is presently the greatest challenge in fighting this disease in developed countries.

Combining mutations in HIV-1 protease to understand mechanisms of resistance

HIV-1 develops resistance to protease inhibitors predominantly by selecting mutations in the protease gene. Studies of resistant mutants of HIV-1 protease with single amino acid substitutions have shown a range of independent effects on specificity, inhibition, and stability. Four double mutants, K45I/L90M, K45I/V82S, D30N/V82S, and N88D/L90M were selected for analysis on the basis of observations of increased or decreased stability or enzymatic activity for the respective single mutants. The double mutants were assayed for catalysis, inhibition, and stability. Crystal structures were analyzed for the double mutants at resolutions of 2.2-1.2 A to determine the associated molecular changes. Sequence-dependent changes in protease-inhibitor interactions were observed in the crystal structures. Mutations D30N, K45I, and V82S showed altered interactions with inhibitor residues at P2/P2', P3/P3'/P4/P4', and P1/P1', respectively. One of the conformations of Met90 in K45I/L90M has an unfavorably close contact with the carbonyl oxygen of Asp25, as observed previously in the L90M single mutant. The observed catalytic efficiency and inhibition for the double mutants depended on the specific substrate or inhibitor. In particular, large variation in cleavage of p6(pol)-PR substrate was observed, which is likely to result in defects in the maturation of the protease from the Gag-Pol precursor and hence viral replication. Three of the double mutants showed values for stability that were intermediate between the values observed for the respective single mutants. D30N/V82S mutant showed lower stability than either of the two individual mutations, which is possibly due to concerted changes in the central P2-P2' and S2-S2' sites. The complex effects of combining mutations are discussed.

Rational approach to AIDS drug design through structural biology

The discovery and development of more than a dozen drugs in the past 15 years for the treatment of AIDS offer an excellent example of progress in the field of rational drug design. At this time, the principal targets are reverse transcriptase and protease, enzymes encoded by the human immunodeficiency virus. The introduction of protease inhibitors, in particular, has drastically decreased the mortality and morbidity associated with AIDS. This review presents the methods used to develop such drugs and discusses the remaining problems, such as the rapid emergence of drug resistance.

Retroviral proteases

SUMMARY

The proteases of retroviruses, such as leukemia viruses, immunodeficiency viruses (including the human immunodeficiency virus, HIV), infectious anemia viruses, and mammary tumor viruses, form a family with the proteases encoded by several retrotransposons in Drosophila and yeast and endogenous viral sequences in primates. Retroviral proteases are key enzymes in viral propagation and are initially synthesized with other viral proteins as polyprotein precursors that are subsequently cleaved by the viral protease activity at specific sites to produce mature, functional units. Active retroviral proteases are homodimers, with each dimer structurally related to the larger class of single-chain aspartic peptidases. Each monomer has four structural elements: two distinct hairpin loops, a wide loop containing the catalytic aspartic acid and an alpha helix. Retroviral gene sequences can vary between infected individuals, and mutations affecting the binding cleft of the protease or the substrate cleavage sites can alter the response of the virus to therapeutic drugs. The need to develop new drugs against HIV will continue to be, to a large extent, the driving force behind further characterization of retroviral proteases.

Structural implications of drug-resistant mutants of HIV-1 protease: high-resolution crystal structures of the mutant protease/substrate analogue complexes

Emergence of drug-resistant mutants of HIV-1 protease is an ongoing problem in the fight against AIDS. The mechanisms governing resistance are both complex and varied. We have determined crystal structures of HIV-1 protease mutants, D30N, K45I, N88D, and L90M complexed with peptide inhibitor analogues of CA-p2 and p2-NC cleavage sites in the Gag-pol precursor in order to study the structural mechanisms underlying resistance. The structures were determined at 1.55-1.9-A resolution and compared with the wild-type structure. The conformational disorder seen for most of the hydrophobic side-chains around the inhibitor binding site indicates flexibility of binding. Eight water molecules are conserved in all 9 structures; their location suggests that they are important for catalysis as well as structural stability. Structural differences among the mutants were analyzed in relation to the observed changes in protease activity and stability. Mutant L90M shows steric contacts with the catalytic Asp25 that could destabilize the catalytic loop at the dimer interface, leading to its observed decreased dimer stability and activity. Mutant K45I reduces the mobility of the flap and the inhibitor and contributes to an enhancement in structural stability and activity. The side-chain variations at residue 30 relative to wild-type are the largest in D30N and the changes are consistent with the altered activity observed with peptide substrates. Polar interactions in D30N are maintained, in agreement with the observed urea sensitivity. The side-chains of D30N and N88D are linked through a water molecule suggesting correlated changes at the two sites, as seen with clinical inhibitors. Structural changes seen in N88D are small; however, water molecules that mediate interactions between Asn88 and Thr74/Thr31/Asp30 in other complexes are missing in N88D.

Structural and biochemical studies of retroviral proteases

Retroviral proteases form a unique subclass of the family of aspartic proteases. These homodimeric enzymes from a number of viral sources have by now been extensively characterized, both structurally and biochemically. The importance of such knowledge to the development of new drugs against AIDS has been, to a large extent, the driving force behind this progress. High-resolution structures are now available for enzymes from human immunodeficiency virus types 1 and 2, simian immunodeficiency virus, feline immunodeficiency virus, Rous sarcoma virus, and equine infectious anemia virus. In this review, structural and biochemical data for retroviral proteases are compared in order to analyze the similarities and differences between the enzymes from different sources and to enhance our understanding of their properties.

Heterocyclic HIV-1 protease inhibitors

[formula: see text] A series of simple heterocyclic HIV-1 protease inhibitors were developed on the basis of size, shape, and electronic complementarity to the active site of the enzyme. The C2-symmetric heterocycles do not contain a transition-state isostere nor are they active site directed irreversible inhibitors; thus, they represent the success of a new design strategy. The first generation heterocycles inhibit the protease in the micromolar range, whereas control compounds show no bioactivity at the same concentrations.

Structural biology of HIV

The human immunodeficiency virus (HIV) genome encodes a total of three structural proteins, two envelope proteins, three enzymes, and six accessory proteins. Studies over the past ten years have provided high-resolution three-dimensional structural information for all of the viral enzymes, structural proteins and envelope proteins, as well as for three of the accessory proteins. In some cases it has been possible to solve the structures of the intact, native proteins, but in most cases structural data were obtained for isolated protein domains, peptidic fragments, or mutants. Peptide complexes with two regulatory RNA fragments and a protein complex with an RNA recognition/encapsidation element have also been structurally characterized. This article summarizes the high-resolution structural information that is currently available for HIV proteins and reviews current structure-function and structure-biological relationships.

Inhibitors of HIV-1 protease: a major success of structure-assisted drug design

Retroviral protease (PR) from the human immunodeficiency virus type 1 (HIV-1) was identified over a decade ago as a potential target for structure-based drug design. This effort was very successful. Four drugs are already approved, and others are undergoing clinical trials. The techniques utilized in this remarkable example of structure-assisted drug design included crystallography, NMR, computational studies, and advanced chemical synthesis. The development of these drugs is discussed in detail. Other approaches to designing HIV-1 PR inhibitors, based on the concepts of symmetry and on the replacement of a water molecule that had been found tetrahedrally coordinated between the enzyme and the inhibitors, are also discussed. The emergence of drug-induced mutations of HIV-1 PR leads to rapid loss of potency of the existing drugs and to the need to continue the development process. The structural basis of drug resistance and the ways of overcoming this phenomenon are mentioned.

Alkylation of a catalytic aspartate group of the SIV protease by an epoxide inhibitor

Specific irreversible inhibition of the SIV protease by FMOC-protected piperidine epoxide 1 involves alkylation of the protein. Tryptic digestion of the alkylated protein and mass spectrometric analysis of the peptides identify an active site aspartic acid (Asp-25) as the single residue that is alkylated. Computer modeling of 1 bound in the crystal structure of the SIV protease using DOCK 3.5 indicates that 1 has appropriate access to the active site. It is able to align in an orientation that allows a proton to be transferred to the epoxide from one of the catalytic aspartic acid groups in conjunction with nucleophilic attack on the epoxide of the carboxylate moiety of the second catalytic aspartic acid residue. Hydrophobic interactions are not optimal for this process due, in part, to the rigidity of the inhibitor ring system and the planar conformation of the amide. The combination of modeling with protein alkylation can provide insights into structural modifications of the inhibitor that may lead to improved inhibitory activity.

A new class of HIV-1 protease inhibitor: the crystallographic structure, inhibition and chemical synthesis of an aminimide peptide isostere

The essential role of HIV-1 protease (HIV-1 PR) in the viral life cycle makes it an attractive target for the development of substrate-based inhibitors that may find efficacy as anti-AIDS drugs. However, resistance has arisen to potent peptidomimetic drugs necessitating the further development of novel chemical backbones for diversity based chemistry focused on probing the active site for inhibitor interactions and binding modes that evade protease resistance. AQ148 is a potent inhibitor of HIV-1 PR and represents a new class of transition state analogues incorporating an aminimide peptide isostere. A 3-D crystallographic structure of AQ148, a tetrapeptide isostere, has been determined in complex with its target HIV-1 PR to a resolution of 2.5 A and used to evaluate the specific structural determinants of AQ148 potency and to correlate structure-activity relationships within the class of related compounds. AQ148 is a competitive inhibitor of HIV-1 PR with a Ki value of 137 nM. Twenty-nine derivatives have been synthesized and chemical modifications have been made at the P1, P2, P1', and P2' sites. The atomic resolution structure of AQ148 bound to HIV-1 PR reveals both an inhibitor binding mode that closely resembles that of other peptidomimetic inhibitors and specific protein/inhibitor interactions that correlate with structure-activity relationships. The structure provides the basis for the design, synthesis and evaluation of the next generation of hydroxyethyl aminimide inhibitors. The aminimide peptide isostere is a scaffold with favorable biological properties well suited to both the combinatorial methods of peptidomimesis and the rational design of potent and specific substrate-based analogues.

Structure-assisted design of nonpeptide human immunodeficiency virus-1 protease inhibitors

The discovery of therapeutic agents has, in the past, started primarily with random screening efforts. These screens, although effective, are time-consuming and expensive. Attempts are now being made to design more efficient methods of screening that take into account available information about the three-dimensional structure of a target receptor or enzyme. In the case of acquired immunodeficiency syndrome, the structure of a proteolytic enzyme, the human immunodeficiency virus (HIV) protease, an aspartyl protease that plays a crucial role in the viral life cycle, has been determined and extensively characterized. Using the protease structure and the computer program DOCK, the active site of the protease was mapped and its shape used to screen a subset of the Cambridge Structural Database. Among the molecules whose shape was complementary to the active site was the antipsychotic agent haloperidol. This molecule and several chemically modified derivatives were shown to bind competitively with micromolar affinity to the HIV protease but not to cellular aspartyl proteases. X-ray structures of the HIV protease complexed with haloperidol derivatives show the molecules binding in the predicted position at the active site. In an attempt to overcome the problems associated with low-affinity competitive inhibitors, reactive groups that enable the molecule to serve as a specific irreversible inhibitor of the HIV protease were introduced onto the haloperidol scaffold. These inhibitors demonstrated an ability to block viral polyprotein processing in a tissue culture model of HIV-1 infection, although their cytotoxicity is pronounced.(ABSTRACT TRUNCATED AT 250 WORDS)