Pre-steady-state kinetic analysis of sequence-dependent nucleotide excision by the 3'-exonuclease activity of bacteriophage T4 DNA polymerase

High-Throughput Exonuclease Assay Based on the Fluorescent Base Analogue 2-Aminopurine

Exonucleases are essential enzymes that remove nucleotides from free DNA ends during DNA replication, DNA repair, and telomere maintenance. Due to their essential role, they are potential targets for novel anticancer and antimicrobial drugs but have so far been little exploited. Here, we present a simple and versatile real-time exonuclease assay based on 2-aminopurine, an intrinsically fluorescent nucleotide that is quenched by neighboring bases when embedded in DNA. We show that our assay is applicable to different eukaryotic and bacterial exonucleases acting on both 3' and 5' DNA ends over a wide range of protein activities and suitable for a high-throughput inhibitor screening campaign. Using our assay, we discover a novel inhibitor of the Mycobacterium tuberculosis PHP-exonuclease that is part of the replicative DNA polymerase DnaE1. Hence, our novel assay will be a useful tool for high-throughput screening for novel exonuclease inhibitors that may interfere with DNA replication or DNA maintenance.

Kinetics of DNA strand transfer between polymerase and proofreading exonuclease active sites regulates error correction during high-fidelity replication

We show that T7 DNA polymerase (pol) and exonuclease (exo) domains contribute to selective error correction during DNA replication by regulating bidirectional strand transfer between the two active sites. To explore the kinetic basis for selective removal of mismatches, we used a fluorescent cytosine analog (1,3-diaza-2-oxophenoxazine) to monitor the kinetics of DNA transfer between the exo and pol sites. We globally fit stopped-flow fluorescence and base excision kinetic data and compared results obtained with ssDNA versus duplex DNA to resolve how DNA transfer governs exo specificity. We performed parallel studies using hydrolysis-resistant phosphorothioate oligonucleotides to monitor DNA transfer to the exo site without hydrolysis. ssDNA binds to the exo site at the diffusion limit (10⁹ M^-1 s^-1, K_d = 40 nM) followed by fast hydrolysis of the 3'-terminal nucleotide (>5000 s^-1). Analysis using duplex DNA with a 3'-terminal mismatch or a buried mismatch exposed a unique intermediate state between pol and exo active sites and revealed that transfer via the intermediate to the exo site is stimulated by free nucleoside triphosphates. Transfer from the exo site back to the pol site after cleavage is fast and efficient. We propose a model to explain why buried mismatches are removed faster than single 3'-terminal mismatches and thereby provide an additional opportunity for error correction. Our data provide the first comprehensive model to explain how DNA transfer from pol to exo active sites and back again after base excision allow efficient selective mismatch removal during DNA replication to improve fidelity by more than 1000-fold.

Substrate specificity and proposed structure of the proofreading complex of T7 DNA polymerase

Faithful replication of genomic DNA by high-fidelity DNA polymerases is crucial for the survival of most living organisms. While high-fidelity DNA polymerases favor canonical base pairs over mismatches by a factor of ∼1 × 10⁵, fidelity is further enhanced several orders of magnitude by a 3′–5′ proofreading exonuclease that selectively removes mispaired bases in the primer strand. Despite the importance of proofreading to maintaining genome stability, it remains much less studied than the fidelity mechanisms employed at the polymerase active site. Here we characterize the substrate specificity for the proofreading exonuclease of a high-fidelity DNA polymerase by investigating the proofreading kinetics on various DNA substrates. The contribution of the exonuclease to net fidelity is a function of the kinetic partitioning between extension and excision. We show that while proofreading of a terminal mismatch is efficient, proofreading a mismatch buried by one or two correct bases is even more efficient. Because the polymerase stalls after incorporation of a mismatch and after incorporation of one or two correct bases on top of a mismatch, the net contribution of the exonuclease is a function of multiple opportunities to correct mistakes. We also characterize the exonuclease stereospecificity using phosphorothioate-modified DNA, provide a homology model for the DNA primer strand in the exonuclease active site, and propose a dynamic structural model for the transfer of DNA from the polymerase to the exonuclease active site based on MD simulations.

John W. (Jan) Drake: A Biochemical View of a Geneticist Par Excellence

John W. Drake died 02-02-2020, a mathematical palindrome, which he would have enjoyed, given his love of "word play and logic," as stated in his obituary and echoed by his family, friends, students, and colleagues. Many aspects of Jan's career have been reviewed previously, including his early years as a Caltech graduate student, and when he was editor-in-chief, with the devoted assistance of his wife Pam, of this journal for 15 impactful years. During his editorship, he raised the profile of GENETICS as the flagship journal of the Genetics Society of America and inspired and contributed to the creation of the Perspectives column, coedited by Jim Crow and William Dove. At the same time, Jan was building from scratch the Laboratory of Molecular Genetics on the newly established Research Triangle Park campus of the National Institute of Environmental Health Science, which he headed for 30 years. This commentary offers a unique perspective on Jan's legacy; we showcase Jan's 1969 benchmark discovery of antimutagenic T4 DNA polymerases and the research by three generations (and counting) of scientists whose research stems from that groundbreaking discovery. This is followed by a brief discussion of Jan's passion: his overriding interest in analyzing mutation rates across species. Several anecdotal stories are included to bring alive one of Jan's favorite phrases, "to think like a geneticist." We feature Jan's genetical approach to mutation studies, along with the biochemistry of DNA polymerase function, our area of expertise. But in the end, we acknowledge, as Jan did, that genetics, also known as in vivo biochemistry, prevails.

Resistance to excision determines efficiency of hepatitis C virus RNA-dependent RNA polymerase inhibition by nucleotide analogs

NS5B is the RNA-dependent RNA polymerase that catalyzes the replication of the hepatitis C virus genome. It is a major target for antiviral drugs including nucleoside analogs, such as the prodrugs mericitabine and sofosbuvir, which get metabolized to 2'-fluoro-2'C-methylcytidine-5'-triphosphate and 2'-fluoro-2'C-methyluridine-5'-triphosphate, respectively. These analogs act as chain terminators after they are incorporated during RNA synthesis. Recently, it has been shown that NS5B can efficiently remove chain terminators by a nucleotide-mediated excision reaction that rescues RNA synthesis. In this study, we use transient-state kinetics to understand the efficiency of inhibition for five nucleoside analogs. We show that CTP analogs are readily incorporated into a growing primer by NS5B but are also efficiently excised. In contrast, although UMP analogs are more slowly incorporated, the excision of UMP is slow and inefficient, and modifications to the 2'-carbon of the UTP ribose ring further decreased rates of excision to an undetectable level. Taken together, these data suggest that the clinical effectiveness of sofosbuvir is largely a function of being intractable to nucleotide-mediated excision compared with similar nucleoside analogs.

Functional evaluation of the C-terminal region of bacteriophage T4 Rad50

Bacteriophage T4 encodes orthologs of the proteins Rad50 (gp46) and Mre11 (gp47), which form a heterotetrameric complex (MR) that participates in the processing of DNA ends for recombination-dependent DNA repair. Crystal and high-resolution cryo-EM structures of Rad50 have revealed DNA binding sites near the dimer interface of Rad50 opposite of Mre11, and near the base of the coiled-coils that extend out from the globular head domain. An analysis of T4-Rad50 using sequenced-based algorithms to identify DNA binding residues predicts that a conserved region of positively charged residues near the C-terminus, distal to the observed binding sites, interacts with DNA. Mutant proteins were generated to test this prediction and their enzymatic and DNA binding activities were evaluated. Consistent with the predictions, the Rad50 C-terminal mutants had reduced affinity for DNA as measured by Rad50 equilibrium DNA binding assays and an increased Km-DNA as determined in MR complex nuclease assays. Moreover, the allosteric activation of ATP hydrolysis activity due to DNA binding was substantially reduced, suggesting that these residues may be involved in the communication between the DNA and ATP binding sites.

High-resolution mapping of DNA polymerase fidelity using nucleotide imbalances and next-generation sequencing

DNA polymerase fidelity is affected by both intrinsic properties and environmental conditions. Current strategies for measuring DNA polymerase error rate in vitro are constrained by low error subtype sensitivity, poor scalability, and lack of flexibility in types of sequence contexts that can be tested. We have developed the Magnification via Nucleotide Imbalance Fidelity (MagNIFi) assay, a scalable next-generation sequencing assay that uses a biased deoxynucleotide pool to quantitatively shift error rates into a range where errors are frequent and hence measurement is robust, while still allowing for accurate mapping to error rates under typical conditions. This assay is compatible with a wide range of fidelity-modulating conditions, and enables high-throughput analysis of sequence context effects on base substitution and single nucleotide deletion fidelity using a built-in template library. We validate this assay by comparing to previously established fidelity metrics, and use it to investigate neighboring sequence-mediated effects on fidelity for several DNA polymerases. Through these demonstrations, we establish the MagNIFi assay for robust, high-throughput analysis of DNA polymerase fidelity.

Determinants of Base-Pair Substitution Patterns Revealed by Whole-Genome Sequencing of DNA Mismatch Repair Defective Escherichia coli

Mismatch repair (MMR) is a major contributor to replication fidelity, but its impact varies with sequence context and the nature of the mismatch. Mutation accumulation experiments followed by whole-genome sequencing of MMR-defective Escherichia coli strains yielded ≈30,000 base-pair substitutions (BPSs), revealing mutational patterns across the entire chromosome. The BPS spectrum was dominated by A:T to G:C transitions, which occurred predominantly at the center base of 5'NAC3'+5'GTN3' triplets. Surprisingly, growth on minimal medium or at low temperature attenuated these mutations. Mononucleotide runs were also hotspots for BPSs, and the rate at which these occurred increased with run length. Comparison with ≈2000 BPSs accumulated in MMR-proficient strains revealed that both kinds of hotspots appeared in the wild-type spectrum and so are likely to be sites of frequent replication errors. In MMR-defective strains transitions were strand biased, occurring twice as often when A and C rather than T and G were on the lagging-strand template. Loss of nucleotide diphosphate kinase increases the cellular concentration of dCTP, which resulted in increased rates of mutations due to misinsertion of C opposite A and T. In an mmr ndk double mutant strain, these mutations were more frequent when the template A and T were on the leading strand, suggesting that lagging-strand synthesis was more error-prone, or less well corrected by proofreading, than was leading strand synthesis.

Contrasting Determinants of Mutation Rates in Germline and Soma

Recent studies of somatic and germline mutations have led to the identification of a number of factors that influence point mutation rates, including CpG methylation, expression levels, replication timing, and GC content. Intriguingly, some of the effects appear to differ between soma and germline: in particular, whereas mutation rates have been reported to decrease with expression levels in tumors, no clear effect has been detected in the germline. Distinct approaches were taken to analyze the data, however, so it is hard to know whether these apparent differences are real. To enable a cleaner comparison, we considered a statistical model in which the mutation rate of a coding region is predicted by GC content, expression levels, replication timing, and two histone repressive marks. We applied this model to both a set of germline mutations identified in exomes and to exonic somatic mutations in four types of tumors. Most determinants of mutations are shared: notably, we detected an effect of expression levels on both germline and somatic mutation rates. Moreover, in all tissues considered, higher expression levels are associated with greater strand asymmetry of mutations. However, mutation rates increase with expression levels in testis (and, more tentatively, in ovary), whereas they decrease with expression levels in somatic tissues. This contrast points to differences in damage or repair rates during transcription in soma and germline.

Variants of sequence family B Thermococcus kodakaraensis DNA polymerase with increased mismatch extension selectivity

Fidelity and selectivity of DNA polymerases are critical determinants for the biology of life, as well as important tools for biotechnological applications. DNA polymerases catalyze the formation of DNA strands by adding deoxynucleotides to a primer, which is complementarily bound to a template. To ensure the integrity of the genome, DNA polymerases select the correct nucleotide and further extend the nascent DNA strand. Thus, DNA polymerase fidelity is pivotal for ensuring that cells can replicate their genome with minimal error. DNA polymerases are, however, further optimized for more specific biotechnological or diagnostic applications. Here we report on the semi-rational design of mutant libraries derived by saturation mutagenesis at single sites of a 3’-5’-exonuclease deficient variant of Thermococcus kodakaraensis DNA polymerase (KOD pol) and the discovery for variants with enhanced mismatch extension selectivity by screening. Sites of potential interest for saturation mutagenesis were selected by their proximity to primer or template strands. The resulting libraries were screened via quantitative real-time PCR. We identified three variants with single amino acid exchanges—R501C, R606Q, and R606W—which exhibited increased mismatch extension selectivity. These variants were further characterized towards their potential in mismatch discrimination. Additionally, the identified enzymes were also able to differentiate between cytosine and 5-methylcytosine. Our results demonstrate the potential in characterizing and developing DNA polymerases for specific PCR based applications in DNA biotechnology and diagnostics.

Measuring specificity in multi-substrate/product systems as a tool to investigate selectivity in vivo

Multiple substrate enzymes present a particular challenge when it comes to understanding their activity in a complex system. Although a single target may be easy to model, it does not always present an accurate representation of what that enzyme will do in the presence of multiple substrates simultaneously. Therefore, there is a need to find better ways to both study these enzymes in complicated systems, as well as accurately describe the interactions through kinetic parameters. This review looks at different methods for studying multiple substrate enzymes, as well as explores options on how to most accurately describe an enzyme's activity within these multi-substrate systems. Identifying and defining this enzymatic activity should help clear the way to using in vitro systems to accurately predicting the behavior of multi-substrate enzymes in vivo. This article is part of a Special Issue entitled: Physiological Enzymology and Protein Functions.

DNA polymerase 3'→5' exonuclease activity: Different roles of the beta hairpin structure in family-B DNA polymerases

Proofreading by the bacteriophage T4 and RB69 DNA polymerases requires a β hairpin structure that resides in the exonuclease domain. Genetic, biochemical and structural studies demonstrate that the phage β hairpin acts as a wedge to separate the primer-end from the template strand in exonuclease complexes. Single amino acid substitutions in the tip of the hairpin or deletion of the hairpin prevent proofreading and create "mutator" DNA polymerases. There is little known, however, about the function of similar hairpin structures in other family B DNA polymerases. We present mutational analysis of the yeast (Saccharomyces cerevisiae) DNA polymerase δ hairpin. Deletion of the DNA polymerase δ hairpin (hpΔ) did not significantly reduce DNA replication fidelity; thus, the β hairpin structure in yeast DNA polymerase δ is not essential for proofreading. However, replication efficiency was reduced as indicated by a slow growth phenotype. In contrast, the G447D amino acid substitution in the tip of the hairpin increased frameshift mutations and sensitivity to hydroxyurea (HU). A chimeric yeast DNA polymerase δ was constructed in which the T4 DNA polymerase hairpin (T4hp) replaced the yeast DNA polymerase δ hairpin; a strong increase in frameshift mutations was observed and the mutant strain was sensitive to HU and to the pyrophosphate analog, phosphonoacetic acid (PAA). But all phenotypes - slow growth, HU-sensitivity, PAA-sensitivity, and reduced fidelity, were observed only in the absence of mismatch repair (MMR), which implicates a role for MMR in mediating DNA polymerase δ replication problems. In comparison, another family B DNA polymerase, DNA polymerase ɛ, has only an atrophied hairpin with no apparent function. Thus, while family B DNA polymerases share conserved motifs and general structural features, the β hairpin has evolved to meet specific needs.

Yeast DNA polymerase ϵ catalytic core and holoenzyme have comparable catalytic rates

The holoenzyme of yeast DNA polymerase ϵ (Pol ϵ) consists of four subunits: Pol2, Dpb2, Dpb3, and Dpb4. A protease-sensitive site results in an N-terminal proteolytic fragment of Pol2, called Pol2core, that consists of the catalytic core of Pol ϵ and retains both polymerase and exonuclease activities. Pre-steady-state kinetics showed that the exonuclease rates on single-stranded, double-stranded, and mismatched DNA were comparable between Pol ϵ and Pol2core. Single-turnover pre-steady-state kinetics also showed that the kpol of Pol ϵ and Pol2core were comparable when preloading the polymerase onto the primer-template before adding Mg(2+) and dTTP. However, a global fit of the data over six sequential nucleotide incorporations revealed that the overall polymerization rate and processivity were higher for Pol ϵ than for Pol2core. The largest difference between Pol ϵ and Pol2core was observed when challenged for the formation of a ternary complex and incorporation of the first nucleotide. Pol ϵ needed less than 1 s to incorporate a nucleotide, but several seconds passed before Pol2core incorporated detectable levels of the first nucleotide. We conclude that the accessory subunits and the C terminus of Pol2 do not influence the catalytic rate of Pol ϵ but facilitate the loading and incorporation of the first nucleotide by Pol ϵ.

Catalytic mechanism of bacteriophage T4 Rad50 ATP hydrolysis

Spontaneous double-strand breaks (DSBs) are one of the most deleterious forms of DNA damage, and their improper repair can lead to cellular dysfunction. The Mre11 and Rad50 proteins, a nuclease and an ATPase, respectively, form a well-conserved complex that is involved in the initial processing of DSBs. Here we examine the kinetic and catalytic mechanism of ATP hydrolysis by T4 Rad50 (gp46) in the presence and absence of Mre11 (gp47) and DNA. Single-turnover and pre-steady state kinetics on the wild-type protein indicate that the rate-limiting step for Rad50, the MR complex, and the MR-DNA complex is either chemistry or a conformational change prior to catalysis. Pre-steady state product release kinetics, coupled with viscosity steady state kinetics, also supports that the binding of DNA to the MR complex does not alter the rate-limiting step. The lack of a positive deuterium solvent isotope effect for the wild type and several active site mutants, combined with pH-rate profiles, implies that chemistry is rate-limiting and the ATPase mechanism proceeds via an asymmetric, dissociative-like transition state. Mutation of the Walker A/B and H-loop residues also affects the allosteric communication between Rad50 active sites, suggesting possible routes for cooperativity between the ATP active sites.

Engineering processive DNA polymerases with maximum benefit at minimum cost

DNA polymerases need to be engineered to achieve optimal performance for biotechnological applications, which often require high fidelity replication when using modified nucleotides and when replicating difficult DNA sequences. These tasks are achieved for the bacteriophage T4 DNA polymerase by replacing leucine with methionine in the highly conserved Motif A sequence (L412M). The costs are minimal. Although base substitution errors increase moderately, accuracy is maintained for templates with mono- and dinucleotide repeats while replication efficiency is enhanced. The L412M substitution increases intrinsic processivity and addition of phage T4 clamp and single-stranded DNA binding proteins further enhance the ability of the phage T4 L412M-DNA polymerase to replicate all types of difficult DNA sequences. Increased pyrophosphorolysis is a drawback of increased processivity, but pyrophosphorolysis is curbed by adding an inorganic pyrophosphatase or divalent metal cations, Mn²⁺ or Ca²⁺. In the absence of pyrophosphorolysis inhibitors, the T4 L412M-DNA polymerase catalyzed sequence-dependent pyrophosphorolysis under DNA sequencing conditions. The sequence specificity of the pyrophosphorolysis reaction provides insights into how the T4 DNA polymerase switches between nucleotide incorporation, pyrophosphorolysis and proofreading pathways. The L-to-M substitution was also tested in the yeast DNA polymerases delta and alpha. Because the mutant DNA polymerases displayed similar characteristics, we propose that amino acid substitutions in Motif A have the potential to increase processivity and to enhance performance in biotechnological applications. An underlying theme in this chapter is the use of genetic methods to identify mutant DNA polymerases with potential for use in current and future biotechnological applications.

Autoinhibition of bacteriophage T4 Mre11 by its C-terminal domain

Mre11 and Rad50 form a stable complex (MR) and work cooperatively in repairing DNA double strand breaks. In the bacteriophage T4, Rad50 (gene product 46) enhances the nuclease activity of Mre11 (gene product 47), and Mre11 and DNA in combination stimulate the ATPase activity of Rad50. The structural basis for the cross-activation of the MR complex has been elusive. Various crystal structures of the MR complex display limited protein-protein interfaces that mainly exist between the C terminus of Mre11 and the coiled-coil domain of Rad50. To test the role of the C-terminal Rad50 binding domain (RBD) in Mre11 activation, we constructed a series of C-terminal deletions and mutations in bacteriophage T4 Mre11. Deletion of the RBD in Mre11 eliminates Rad50 binding but only has moderate effect on its intrinsic nuclease activity; however, the additional deletion of the highly acidic flexible linker that lies between RBD and the main body of Mre11 increases the nuclease activity of Mre11 by 20-fold. Replacement of the acidic residues in the flexible linker with alanine elevates the Mre11 activity to the level of the MR complex when combined with deletion of RBD. Nuclease activity kinetics indicate that Rad50 association and deletion of the C terminus of Mre11 both enhance DNA substrate binding. Additionally, a short peptide that contains the flexible linker and RBD of Mre11 acts as an inhibitor of Mre11 nuclease activity. These results support a model where the Mre11 RBD and linker domain act as an autoinhibitory domain when not in complex with Rad50. Complex formation with Rad50 alleviates this inhibition due to the tight association of the RBD and the Rad50 coiled-coil.

Detecting DNA modifications from SMRT sequencing data by modeling sequence context dependence of polymerase kinetic

DNA modifications such as methylation and DNA damage can play critical regulatory roles in biological systems. Single molecule, real time (SMRT) sequencing technology generates DNA sequences as well as DNA polymerase kinetic information that can be used for the direct detection of DNA modifications. We demonstrate that local sequence context has a strong impact on DNA polymerase kinetics in the neighborhood of the incorporation site during the DNA synthesis reaction, allowing for the possibility of estimating the expected kinetic rate of the enzyme at the incorporation site using kinetic rate information collected from existing SMRT sequencing data (historical data) covering the same local sequence contexts of interest. We develop an Empirical Bayesian hierarchical model for incorporating historical data. Our results show that the model could greatly increase DNA modification detection accuracy, and reduce requirement of control data coverage. For some DNA modifications that have a strong signal, a control sample is not even needed by using historical data as alternative to control. Thus, sequencing costs can be greatly reduced by using the model. We implemented the model in a R package named seqPatch, which is available at https://github.com/zhixingfeng/seqPatch.

DNA modifications have been found in a wide range of living organisms, from bacteria to human. Many existing studies have shown that they play important roles in development, disease, bacteria virulence, etc. However, for many types of DNA modification, for example N6-methyladenine and 8-oxoG, there is not an efficient and accurate detection method. Single molecule real time (SMRT) sequencing not only generates DNA sequences, but also generates DNA polymerase kinetic information. The kinetic information is sensitive to DNA modifications in the sequenced DNA template, and therefore can be used for detecting a wide range of DNA modification types. The usual detection strategy is a case-control method, which compare kinetic information between native sample and a control sample whose modifications have been removed. However, generating a control sample doubles the cost. We proposed a hierarchical model, which can incorporate existing SMRT sequencing data to increase detection accuracy and reduce coverage requirement of control sample or even avoid the need of a control sample in some cases. We tested our method on SMRT sequencing data of plasmids with known modified sites and E. coli K-12 strain to demonstrate our method can greatly increase detection accuracy and reduce sequencing cost.

Unwinding of primer-templates by archaeal family-B DNA polymerases in response to template-strand uracil

Archaeal family-B DNA polymerases bind tightly to deaminated bases and stall replication on encountering uracil in template strands, four bases ahead of the primer-template junction. Should the polymerase progress further towards the uracil, for example, to position uracil only two bases in front of the junction, 3′–5′ proof-reading exonuclease activity becomes stimulated, trimming the primer and re-setting uracil to the +4 position. Uracil sensing prevents copying of the deaminated base and permanent mutation in 50% of the progeny. This publication uses both steady-state and time-resolved 2-aminopurine fluorescence to show pronounced unwinding of primer-templates with Pyrococcus furiosus (Pfu) polymerase–DNA complexes containing uracil at +2; much less strand separation is seen with uracil at +4. DNA unwinding has long been recognized as necessary for proof-reading exonuclease activity. The roles of M247 and Y261, amino acids suggested by structural studies to play a role in primer-template unwinding, have been probed. M247 appears to be unimportant, but 2-aminopurine fluorescence measurements show that Y261 plays a role in primer-template strand separation. Y261 is also required for full exonuclease activity and contributes to the fidelity of the polymerase.

[The fidelity mechanism of DNA synthesis]

Accurate DNA synthesis is vital to maintain genome stability and ensure propagation of species. Synthetic errors have far reaching consequences. Therefore, DNA synthesis is remarkably accurate. The high fidelity is mainly achieved through three steps: ① nucleotide selection, which is based on hydrogen, base pair shape, or some other elements; ② 3'→5' exonuclease proofreading, which removes mis-incorporated nucleotides in cis or trans; ③ repair process, which could correct mismatched nucleotides escaping from proofreading, such as mismatch repair, excission repair, homologous recombination repair, and translesion DNA synthesis. Because all polymerases are suitable targets for anticancer or antiviral drugs, their fidelity is involved in drug resistance and side effects. Understanding the molecular basis of synthesis fidelity is of vital importance. In this review, the fidelity mechanisms of DNA synthesis will be discussed in detail. Furthermore, their application perspective was discussed.

Fluorescent DNA-based enzyme sensors

Fluorescent sensors that make use of DNA structures have become widely useful in monitoring enzymatic activities. Early studies focused primarily on enzymes that naturally use DNA or RNA as the substrate. However, recent advances in molecular design have enabled the development of nucleic acid sensors for a wider range of functions, including enzymes that do not normally bind DNA or RNA. Nucleic acid sensors present some potential advantages over classical small-molecule sensors, including water solubility and ease of synthesis. An overview of the multiple strategies under recent development is presented in this critical review, and expected future developments in microarrays, single molecule analysis, and in vivo sensing are discussed (160 references).

Structure of the 2-aminopurine-cytosine base pair formed in the polymerase active site of the RB69 Y567A-DNA polymerase

The adenine base analogue 2-aminopurine (2AP) is a potent base substitution mutagen in prokaryotes because of its enhanceed ability to form a mutagenic base pair with an incoming dCTP. Despite more than 50 years of research, the structure of the 2AP-C base pair remains unclear. We report the structure of the 2AP-dCTP base pair formed within the polymerase active site of the RB69 Y567A-DNA polymerase. A modified wobble 2AP-C base pair was detected with one H-bond between N1 of 2AP and a proton from the C4 amino group of cytosine and an apparent bifurcated H-bond between a proton on the 2-amino group of 2-aminopurine and the ring N3 and O2 atoms of cytosine. Interestingly, a primer-terminal region rich in AT base pairs, compared to GC base pairs, facilitated dCTP binding opposite template 2AP. We propose that the increased flexibility of the nucleotide binding pocket formed in the Y567A-DNA polymerase and increased "breathing" at the primer-terminal junction of A+T-rich DNA facilitate dCTP binding opposite template 2AP. Thus, interactions between DNA polymerase residues with a dynamic primer-terminal junction play a role in determining base selectivity within the polymerase active site of RB69 DNA polymerase.

Functional evaluation of bacteriophage T4 Rad50 signature motif residues

The repair of DNA double-strand breaks (DSBs) is essential to maintaining the integrity of the genome, and organisms have evolved a conserved mechanism to facilitate their repair. In eukaryotes, archaea, and some bacteriophage, a complex made up of Mre11 and Rad50 (MR complex), which are a nuclease and ATPase, respectively, is involved in the initial processing of DSBs. Rad50 is a member of the ATP Binding Cassette (ABC) protein superfamily, the members of which contain an important Signature motif that acts in trans to complete the dimeric ATP binding site. To explore the functional relevance of this motif, four of its five residues were mutated in bacteriophage T4 Rad50, and their respective ATPase and nuclease activities were evaluated. The mutations reveal the functional roles of the Signature motif in ATP binding, hydrolysis, and cooperativity. In several mutants, the degree of DNA activation of ATP hydrolysis activity is reduced, indicating that the Signature motif is involved in allosteric signal transmission between the DNA and ATP binding sites of the MR complex. ATP hydrolysis is not required for nuclease activity when the probe is near the beginning of the DNA substrate; however, when an internal probe is used, decreases in ATPase activity have substantial effects on nuclease activity, suggesting that ATP hydrolysis is involved in translocation of the complex. Unexpectedly, the ATP hydrolysis and nuclease activities are not directly correlated with each other, and each mutation appears to differentially affect the exonuclease activity of Mre11.

Photoinduced electron transfer occurs between 2-aminopurine and the DNA nucleic acid monophosphates: results from cyclic voltammetry and fluorescence quenching

2-Aminopurine (2AP) is a fluorescent adenine analogue that is useful in part because its substantial fluorescence quantum yield is sensitive to base stacking with native bases in ss- and ds-DNA. However, the degree of quenching is sequence dependent and the mechanism of quenching is still a matter of some debate. Here we show that the most likely quenching mechanism in aqueous solution involves photoinduced electron transfer (PET), as revealed by cyclic voltammetry (CV) performed in aprotic organic solvents. These potentials were used with spectroscopic data to obtain excited-state reduction and oxidation potentials. Stern-Volmer (S-V) experiments using the native base monophosphate nucleotides (NMPs) rGMP, rAMP, rCMP, and dTMP were performed in aqueous solution to obtain quenching rate constants kq. The results suggest that 2AP* can act as either an electron donor or an electron acceptor depending on the particular NMP but that PET proceeds for all NMPs tested.

Biochemical characterization of bacteriophage T4 Mre11-Rad50 complex

The Mre11-Rad50 complex (MR) from bacteriophage T4 (gp46/47) is involved in the processing of DNA double-strand breaks. Here, we describe the activities of the T4 MR complex and its modulation by proteins involved in homologous recombination. T4 Mre11 is a Rad50- and Mn(2+)-dependent dsDNA exonuclease and ssDNA endonuclease. ATP hydrolysis is required for the removal of multiple nucleotides via dsDNA exonuclease activity but not for the removal of the first nucleotide or for ssDNA endonuclease activity, indicating ATP hydrolysis is only required for repetitive nucleotide removal. By itself, Rad50 is a relatively inefficient ATPase, but the presence of Mre11 and dsDNA increases ATP hydrolysis by 20-fold. The ATP hydrolysis reaction exhibits positive cooperativity with Hill coefficients ranging from 1.4 for Rad50 alone to 2.4 for the Rad50-Mre11-DNA complex. Kinetic assays suggest that approximately four nucleotides are removed per ATP hydrolyzed. Directionality assays indicate that the prevailing activity is a 3' to 5' dsDNA exonuclease, which is incompatible with the proposed role of MR in the production of 3' ssDNA ends. Interestingly, we found that in the presence of a recombination mediator protein (UvsY) and ssDNA-binding protein (gp32), Mre11 is capable of using Mg(2+) as a cofactor for its nuclease activity. Additionally, the Mg(2+)-dependent nuclease activity, activated by UvsY and gp32, results in the formation of endonuclease reaction products. These results suggest that gp32 and UvsY may alter divalent cation preference and facilitate the formation of a 3' ssDNA overhang, which is a necessary intermediate for recombination-mediated double-strand break repair.

A label-free assay of exonuclease activity using a pyrosequencing technique

Enzymes with 3'-5' exonuclease activities are important in promoting the accuracy of DNA replication and DNA repair by proofreading. The alteration of the function of these enzymes by endogenous or exogenous effectors could, therefore, have a considerable impact on DNA replication and ultimately on genome integrity. We have developed a label-free high-throughput screening method for quantifying the effects of different reagents on exonuclease activity. The assay is based on a hairpin-forming biotinylated oligonucleotide substrate that contains one or more exonuclease-resistant phosphorothioate nucleotides. The activity and specificity of the selected 3'-5' exonuclease is determined indirectly using a sensitive pyrosequencing reaction after cleanup of the samples. In this pyrosequencing step, the amount of nucleotides filled into each position of the exonucleolytically degraded 3' end of the substrate can be recorded quantitatively and equals the amount of the nucleotides removed by the exonuclease. This system allows the estimation of both processivity and efficiency of the exonuclease activity. We have employed compounds reported in the literature to inhibit the exonuclease activities of either exonuclease III or the large fragment of polymerase I (Klenow fragment) to evaluate the assay.

DNA polymerase fidelity: comparing direct competition of right and wrong dNTP substrates with steady state and pre-steady state kinetics

DNA polymerase fidelity is defined as the ratio of right (R) to wrong (W) nucleotide incorporations when dRTP and dWTP substrates compete at equal concentrations for primer extension at the same site in the polymerase-primer-template DNA complex. Typically, R incorporation is favored over W by 10(3)-10(5)-fold, even in the absence of 3'-exonuclease proofreading. Straightforward in principle, a direct competition fidelity measurement is difficult to perform in practice because detection of a small amount of W is masked by a large amount of R. As an alternative, enzyme kinetics measurements to evaluate k(cat)/K(m) for R and W in separate reactions are widely used to measure polymerase fidelity indirectly, based on a steady state derivation by Fersht. A systematic comparison between direct competition and kinetics has not been made until now. By separating R and W products using electrophoresis, we have successfully taken accurate fidelity measurements for directly competing R and W dNTP substrates for 9 of the 12 natural base mispairs. We compare our direct competition results with steady state and pre-steady state kinetic measurements of fidelity at the same template site, using the proofreading-deficient mutant of Klenow fragment (KF(-)) DNA polymerase. All the data are in quantitative agreement.

Proofreading dynamics of a processive DNA polymerase

Replicative DNA polymerases present an intrinsic proofreading activity during which the DNA primer chain is transferred between the polymerization and exonuclease sites of the protein. The dynamics of this primer transfer reaction during active polymerization remain poorly understood. Here we describe a single-molecule mechanical method to investigate the conformational dynamics of the intramolecular DNA primer transfer during the processive replicative activity of the Phi 29 DNA polymerase and two of its mutants. We find that mechanical tension applied to a single polymerase-DNA complex promotes the intramolecular transfer of the primer in a similar way to the incorporation of a mismatched nucleotide. The primer transfer is achieved through two novel intermediates, one a tension-sensitive and functional polymerization conformation and a second non-active state that may work as a fidelity check point for the proofreading reaction.

The use of 2-aminopurine fluorescence to study DNA polymerase function

The fluorescence of the base analog 2-aminopurine (2AP) is used in highly sensitive assays to determine kinetic parameters for DNA polymerase catalyzed reactions, including exonucleolytic proofreading and nucleotide binding and incorporation. Since 2AP fluorescence can also be used to probe DNA polymerase-induced conformational changes in 2AP-labeled DNA substrates, reaction steps that occur before product formation can be detected. Instruction is provided here in the use of 2AP fluorescence in steady-state and presteady-state assays to study DNA polymerase function and DNA replication.

Influence of neighbouring base sequences on the mutagenesis induced by 7,8-dihydro-8-oxoguanine in yeast

We have analysed the influence of neighbouring base sequences on the mutagenesis induced by 7,8-dihydro-8-oxoguanine (8-oxoG or G(o)), a typical oxidative lesion of DNA, using the yeast oligonucleotide transformation technique. Two oligonucleotides, oligo-CCG(o) and oligo-CGG(o), each possessing a single 8-oxoG residue and represented by the sequences 5'-CCG(o)-3' and 5'-CGG(o)-3', respectively, were introduced into a chromosome of Saccharomyces cerevisiae and their mutagenic potentials were compared. In a wild-type strain, 8-oxoG showed very weak mutagenic potential in both cases. However, the lesion in 5'-CCG(o)-3' can cause efficient G-to-T transversion in a strain lacking the rad30 gene which encodes yeast DNA polymerase eta (Ypoleta). To explore the properties associated with this translesion synthesis (TLS), the same two oligonucleotides possessing an 8-oxoG were used as templates for a standing-start primer extension assay, and the nucleotide incorporation opposite 8-oxoG was investigated. We found that dATP incorporation opposite 8-oxoG with Ypoleta was low for both sequences. In particular, very low dATP incorporation was observed for the 5'-CCG(o)-3' sequence. These results account for the efficient inhibition of mutagenesis by Ypoleta. TLS plays an important role in one DNA sequence in terms of avoiding mutagenesis induced by 8-oxoG in yeast. In contrast, human yeast DNA polymerase eta showed higher dATP incorporation rates even with the 5'-CCG(o)-3' sequence.

Use of 2-aminopurine fluorescence to study the role of the beta hairpin in the proofreading pathway catalyzed by the phage T4 and RB69 DNA polymerases

For DNA polymerases to proofread a misincorporated nucleotide, the terminal 3-4 nucleotides of the primer strand must be separated from the template strand before being bound in the exonuclease active center. Genetic and biochemical studies of the bacteriophage T4 DNA polymerase revealed that a prominent beta-hairpin structure in the exonuclease domain is needed to efficiently form the strand-separated exonuclease complexes. We present here further mutational analysis of the loop region of the T4 DNA polymerase beta-hairpin structure, which provides additional evidence that residues in the loop, namely, Y254 and G255, are important for DNA replication fidelity. The mechanism of strand separation was probed in in vitro reactions using the fluorescence of the base analogue 2-aminopurine (2AP) and mutant RB69 DNA polymerases that have modifications to the beta hairpin, to the exonuclease active site, or to both. We propose from these studies that the beta hairpin in the exonuclease domain of the T4 and RB69 DNA polymerases functions to facilitate strand separation, but residues in the exonuclease active center are required to capture the 3' end of the primer strand following strand separation.

DNA polymerase proofreading: active site switching catalyzed by the bacteriophage T4 DNA polymerase

DNA polymerases achieve high-fidelity DNA replication in part by checking the accuracy of each nucleotide that is incorporated and, if a mistake is made, the incorrect nucleotide is removed before further primer extension takes place. In order to proofread, the primer-end must be separated from the template strand and transferred from the polymerase to the exonuclease active center where the excision reaction takes place; then the trimmed primer-end is returned to the polymerase active center. Thus, proofreading requires polymerase-to-exonuclease and exonuclease-to-polymerase active site switching. We have used a fluorescence assay that uses differences in the fluorescence intensity of 2-aminopurine (2AP) to measure the rates of active site switching for the bacteriophage T4 DNA polymerase. There are three findings: (i) the rate of return of the trimmed primer-end from the exonuclease to the polymerase active center is rapid, >500 s⁻¹; (ii) T4 DNA polymerase can remove two incorrect nucleotides under single turnover conditions, which includes presumed exonuclease-to-polymerase and polymerase-to-exonuclease active site switching steps and (iii) proofreading reactions that initiate in the polymerase active center are not intrinsically processive.

Fluorescent analysis of translesion DNA synthesis by using a novel, non-natural nucleotide analogue

The replication of damaged DNA is a promutagenic process that can lead to disease development. This report evaluates the dynamics of nucleotide incorporation opposite an abasic site, a commonly formed DNA lesion, by using two fluorescent nucleotide analogues, 2-aminopurine deoxyribose triphosphate (2-APTP) and 5-phenylindole deoxyribose triphosphate (5-PhITP). In both cases, the kinetics of incorporation were compared by using a 32P-radiolabel extension assay versus a fluorescence-quenching assay. Although 2-APTP is efficiently incorporated opposite a templating nucleobase (thymine), the kinetics for incorporation opposite an abasic site are significantly slower. The lower catalytic efficiency hinders its use as a probe to study translesion DNA synthesis. In contrast, the rate constant for the incorporation of 5-PhITP opposite the DNA lesion is 100-fold faster than that for 2-APTP. Nearly identical kinetic parameters are obtained from fluorescence quenching or the 32P-radiolabel assay. Surprisingly, distinct differences in the kinetics of 5-PhITP incorporation opposite the DNA lesion are detected when using either bacteriophage T4 DNA polymerase or the Escherichia coli Klenow fragment. These differences suggest that the dynamics of nucleotide incorporation opposite an abasic site are polymerase-dependent. Collectively, these data indicate that 5-PhITP can be used to perform real-time analyses of translesion DNA synthesis as well as to functionally probe differences in polymerase function.

Kinetics of error generation in homologous B-family DNA polymerases

The kinetics of forming a proper Watson-Crick base pair as well incorporating bases opposite furan, an abasic site analog, have been well characterized for the B Family replicative DNA polymerase from bacteriophage T4. Structural studies of these reactions, however, have only been performed with the homologous enzyme from bacteriophage RB69. In this work, the homologous enzymes from RB69 and T4 were compared in parallel reactions to determine the relative abilities of the two polymerases to incorporate correct nucleotides as well as to form improper pairings. The kinetic rates for three different exonuclease mutants for each enzyme were measured for incorporation of an A opposite T and an A opposite furan as well as for the formation of A:C and T:T mismatches. The T4 exonuclease mutants were all approximately 2- to 7-fold more efficient than the corresponding RB69 exonuclease mutants depending on whether a T or furan was in the templating position and which exonuclease mutant was used. The rates for mismatch formation by T4 were significantly reduced compared with incorporation opposite furan, much more so than the corresponding RB69 mutant. These results show that there are kinetic differences between the two enzymes but they are not large enough to preclude structural assumptions for T4 DNA polymerase based on the known structure of the RB69 DNA polymerase.

Dynamics of nucleotide incorporation: snapshots revealed by 2-aminopurine fluorescence studies

Formation of a noncanonical base pair between dFTP, a dTTP analogue that cannot form H bonds, and the fluorescent base analogue 2-aminopurine (2AP) was studied in order to discover how the bacteriophage T4 DNA polymerase selects nucleotides with high accuracy. Changes in 2AP fluorescence intensity provided a spectroscopic reporter of the nucleotide binding reactions, which were combined with rapid-quench, pre-steady-state reactions to measure product formation. These studies supported and extended previous findings that the T4 DNA polymerase binds nucleotides in multiple steps with increasing selectivity. With 2AP in the template position, initial dTTP binding was rapid but selective: K(d(dTTP)) (first step) = 31 microM; K(d(dCTP)) (first step) approximately 3 mM. In studies with dFTP, this step was revealed to have two components: formation of an initial preinsertion complex in which H bonds between bases in the newly forming base pair were not essential, which was followed by formation of a final preinsertion complex in which H bonds assisted. The second nucleotide binding step was characterized by increased discrimination against dTTP binding opposite template 2AP, K(d) (second step) = 367 microM, and additional conformational changes were detected in ternary enzyme-DNA-dTTP complexes, as expected for forming closed complexes. We demonstrate here that the second binding step occurs before formation of the phosphodiester bond. Thus, the high fidelity of nucleotide insertion by T4 DNA polymerase is accomplished by the sequential application of selectivity in first forming accurate preinsertion complexes, and then additional conformational changes are applied that further increase discrimination against incorrect nucleotides.

A Selective, Noncovalent Assay for Base Flipping in DNA

Base flipping, the conformational change of a nucleobase to an extrahelical position, is a key step in the enzymatic repair of damaged DNA. An assay that can detect the flipped-out species in free solution without covalent modification of the DNA would be desirable. The design and synthesis of a simple, sensitive, and rapid assay using specific noncovalent binding to pyrimidines by zinc-cyclen and a commonly used fluorescent reporter group, dansyl, is reported. The binding of the zinc-cyclen unit to a flipped-out thymine base results in a change in the fluorescent properties of the dansyl group that is distinct from nonspecific binding to duplex DNA or intercalation into either the flipped-in or flipped-out species. The assay was tested using fluorescence spectroscopy and detection at 533 +/- 5 nm with normal and abasic duplex DNA as negative and positive controls. The data obtained are fitted to a one-site binding model to determine the equilibrium constant for the two-step process involving base flipping and binding to be approximately 10-6 M.

Exchange of DNA base pairs that coincides with recognition of homology promoted by E. coli RecA protein

The unresolved mechanism by which a single strand of DNA recognizes homology in duplex DNA is central to understanding genetic recombination and repair of double-strand breaks. Using stopped-flow fluorescence we monitored strand exchange catalyzed by E. coli RecA protein, measuring simultaneously the rate of exchange of A:T base pairs and the rates of formation and dissociation of the three-stranded intermediates called synaptic complexes. The rate of exchange of A:T base pairs was indistinguishable from the rate of formation of synaptic complexes, whereas the rate of displacement of a single strand from complexes was five to ten times slower. This physical evidence shows that a subset of bases exchanges at a rate that is fast enough to account for recognition of homology. Together, several studies suggest that a mechanism governed by the dynamic structure of DNA and catalyzed by diverse enzymes underlies both recognition of homology and initiation of strand exchange.

To slip or skip, visualizing frameshift mutation dynamics for error-prone DNA polymerases

Three models describing frameshift mutations are "classical" Streisinger slippage, proposed for repetitive DNA, and "misincorporatation misalignment" and "dNTP-stabilized misalignment," proposed for non-repetitive DNA. We distinguish between models using pre-steady state fluorescence kinetics to visualize transiently misaligned DNA intermediates and nucleotide incorporation products formed by DNA polymerases adept at making small frameshift mutations in vivo. Human polymerase (pol) mu catalyzes Streisinger slippage exclusively in repetitive DNA, requiring as little as a dinucleotide repeat. Escherichia coli pol IV uses dNTP-stabilized misalignment in identical repetitive DNA sequences, revealing that pol mu and pol IV use different mechanisms in repetitive DNA to achieve the same mutational end point. In non-repeat sequences, pol mu switches to dNTP-stabilized misalignment. pol beta generates -1 frameshifts in "long" repeats and base substitutions in "short" repeats. Thus, two polymerases can use two different frameshift mechanisms on identical sequences, whereas one polymerase can alternate between frameshift mechanisms to process different sequences.

Bacteriophage T4 genome

Phage T4 has provided countless contributions to the paradigms of genetics and biochemistry. Its complete genome sequence of 168,903 bp encodes about 300 gene products. T4 biology and its genomic sequence provide the best-understood model for modern functional genomics and proteomics. Variations on gene expression, including overlapping genes, internal translation initiation, spliced genes, translational bypassing, and RNA processing, alert us to the caveats of purely computational methods. The T4 transcriptional pattern reflects its dependence on the host RNA polymerase and the use of phage-encoded proteins that sequentially modify RNA polymerase; transcriptional activator proteins, a phage sigma factor, anti-sigma, and sigma decoy proteins also act to specify early, middle, and late promoter recognition. Posttranscriptional controls by T4 provide excellent systems for the study of RNA-dependent processes, particularly at the structural level. The redundancy of DNA replication and recombination systems of T4 reveals how phage and other genomes are stably replicated and repaired in different environments, providing insight into genome evolution and adaptations to new hosts and growth environments. Moreover, genomic sequence analysis has provided new insights into tail fiber variation, lysis, gene duplications, and membrane localization of proteins, while high-resolution structural determination of the "cell-puncturing device," combined with the three-dimensional image reconstruction of the baseplate, has revealed the mechanism of penetration during infection. Despite these advances, nearly 130 potential T4 genes remain uncharacterized. Current phage-sequencing initiatives are now revealing the similarities and differences among members of the T4 family, including those that infect bacteria other than Escherichia coli. T4 functional genomics will aid in the interpretation of these newly sequenced T4-related genomes and in broadening our understanding of the complex evolution and ecology of phages-the most abundant and among the most ancient biological entities on Earth.

Using 2-aminopurine fluorescence to measure incorporation of incorrect nucleotides by wild type and mutant bacteriophage T4 DNA polymerases

The ability of wild type and mutant T4 DNA polymerases to discriminate in the utilization of the base analog 2-aminopurine (2AP) and the fluorescence of 2AP were used to determine how DNA polymerases distinguish between correct and incorrect nucleotides. Because T4 DNA polymerase incorporates dTMP opposite 2AP under single-turnover conditions, it was possible to compare directly the kinetic parameters for incorporation of dTMP opposite template 2AP to the parameters for incorporation of dTMP opposite template A without the complication of enzyme dissociation. The most significant difference detected was in the K(d) for dTTP, which was 10-fold higher for incorporation of dTMP opposite template 2AP (approximately 367 microm) than for incorporation of dTMP opposite template A (approximately 31 microm). In contrast, the dTMP incorporation rate was reduced only about 2-fold from about 318 s(-1) with template A to about 165 s(-1) for template 2AP. Discrimination is due to the high selectivity in the initial nucleotide-binding step. T4 DNA polymerase binding to DNA with 2AP in the template position induces formation of a nucleotide binding pocket that is preshaped to bind dTTP and to exclude other nucleotides. If nucleotide binding is hindered, initiation of the proofreading pathway acts as an error avoidance mechanism to prevent incorporation of incorrect nucleotides.

Synthesis and fluorescence study of 7-azaindole in DNA oligonucleotides replacing a purine base

The fluorescence spectroscopy of 7-azaindole (7aIn) incorporated in DNA oligonucleotides is investigated. Incorporation of 7aIn into DNA oligonucleotides is accomplished through standard solid-phase phosphoramidite chemistry. Fluorescence emission of the 7aIn chromophore shifts slightly to the red (from 386 nm to 388 nm) upon glycosylation at the N-1 position, but its relative fluorescence quantum yield increases 23 times, from 0.023 to 0.53. Upon incorporation into DNA, the fluorescence emission of 7aIn is greatly quenched with fluorescence quantum yields of 0.020 and 0.016 in single and double strand DNA, respectively. The fluorescence emission for 7aIn in DNA oligonucleotides shifts to the blue with an emission maximum at 379 nm. Both the strong fluorescence quenching and the blue shift of the emission spectrum signify that 7aIn is stacked with neighboring DNA bases in both single and double strand DNA. As the duplex DNA melts due to temperature increase, the fluorescence of the 7aIn chromophore increases, indicating the transition from the less fluorescent duplex DNA to the more fluorescent single strand DNA. Since this fluorescent 7aIn is a structural analog of purine, its fluorescence property may be utilized as a probe for studying nucleic acid structure and dynamics.

Fidelity of Escherichia coli DNA polymerase IV. Preferential generation of small deletion mutations by dNTP-stabilized misalignment

Escherichia coli DNA polymerase IV (pol IV), a member of the error-prone Y family, predominantly generates -1 frameshifts when copying DNA in vitro. T-->G transversions and T-->C transitions are the most frequent base substitutions observed. The in vitro data agree with mutational spectra obtained when pol IV is overexpressed in vivo. Single base deletion and base substitution rates measured in the lacZalpha gene in vitro are, on average, 2 x 10(-4) and 5 x 10(-5), respectively. The range of misincorporation and mismatch extension efficiencies determined kinetically are 10(-3) to 10(-5). The presence of beta sliding clamp and gamma-complex clamp loading proteins strongly enhance pol IV processivity but have no discernible influence on fidelity. By analyzing changes in fluorescence of a 2-aminopurine template base undergoing replication in real time, we show that a "dNTP-stabilized" misalignment mechanism is responsible for making -1 frameshift mutations on undamaged DNA. In this mechanism, a dNTP substrate is paired "correctly" opposite a downstream template base, on a "looped out" template strand instead of mispairing opposite a next available template base. By using the same mechanism, pol IV "skips" past an abasic template lesion to generate a -1 frameshift. A crystal structure depicting dNTP-stabilized misalignment was reported recently for Sulfolubus solfataricus Dpo4, a Y family homolog of Escherichia coli pol IV.

Flipping duplex DNA inside out: a double base-flipping reaction mechanism by Escherichia coli MutY adenine glycosylase

The Escherichia coli MutY adenine glycosylase plays a critical role in repairing mismatches in DNA between adenine and the oxidatively damaged guanine base 8-oxoguanine. Crystallographic studies of the catalytic core domain of MutY show that the scissile adenine is extruded from the DNA helix to be bound in the active site of the enzyme (Guan, Y., Manuel, R. C., Arvai, A. S., Parikh, S. S., Mol, C. D., Miller, J. H., Lloyd, S., and Tainer, J. A. (1998) Nat. Struct. Biol. 5, 1058-1064). However, the structural and mechanistic bases for the recognition of the 8-oxoguanine remain poorly understood. In experiments using a single-stranded 8-bromoguanine-containing synthetic oligodeoxyribonucleotide alone and in a duplex construct mismatched to an adenine, we observed UV cross-linking between MutY and the 8-bromoguanine probe. We further observed enhanced cross-linking in the single strand experiments, suggesting that neither the duplex context nor the mismatch with adenine is required for recognition of the 8-oxoguanine moiety. Stopped-flow fluorescence studies using 2-aminopurine-containing oligodeoxyribonucleotides further revealed the sequential extrusion of the 8-oxoguanine at 108 s(-1) followed by the adenine at 16 s(-1). A protein isomerization step following base flipping at 1.9 s(-1) was also observed and is postulated to provide additional stabilization of the extruded adenine thereby facilitating its capture by the active site for excision.

Resolving a fidelity paradox: why Escherichia coli DNA polymerase II makes more base substitution errors in AT- compared with GC-rich DNA

The activity of DNA polymerase-associated proofreading 3'-exonucleases is generally enhanced in less stable DNA regions leading to a reduction in base substitution error frequencies in AT- versus GC-rich sequences. Unexpectedly, however, the opposite result was found for Escherichia coli DNA polymerase II (pol II). Nucleotide misincorporation frequencies for pol II were found to be 3-5-fold higher in AT- compared with GC-rich DNA, both in the presence and absence of polymerase processivity subunits, beta dimer and gamma complex. In contrast, E. coli pol III holoenzyme, behaving "as expected," exhibited 3-5-fold lower misincorporation frequencies in AT-rich DNA. A reduction in fidelity in AT-rich regions occurred for pol II despite having an associated 3'-exonuclease proofreading activity that preferentially degrades AT-rich compared with GC-rich DNA primer-template in the absence of DNA synthesis. Concomitant with a reduction in fidelity, pol II polymerization efficiencies were 2-6-fold higher in AT-rich DNA, depending on sequence context. Pol II paradoxical fidelity behavior can be accounted for by the enzyme's preference for forward polymerization in AT-rich sequences. The more efficient polymerization suppresses proofreading thereby causing a significant increase in base substitution error rates in AT-rich regions.

Exonuclease proofreading by human mitochondrial DNA polymerase

We have examined the ability of the human mitochondrial DNA polymerase to correct errors in DNA sequence using single turnover kinetic methods. The rate of excision of single-stranded DNA ranged from 0.07 to 0.17 x s(-1), depending on the identity of the 3'-base. Excision of the 3'-terminal base from correctly base paired DNA occurred at a rate of 0.05 x s(-1), indicating that the cost of proofreading is minimal, as defined by the ratio of the k(exo) for correctly base-paired DNA divided by the rate of forward polymerization (0.05/37 = 0.14%). Excision of duplex DNA containing 1-7 mismatches was biphasic, and the rate and amplitude of the fast phase increased with the number of mismatches, reaching a maximum of 9 x s(-1). We showed that transfer of DNA from the polymerase to the exonuclease active site and back again occurs through an intramolecular reaction, allowing for a complete cycle of reactions for error correction. For DNA containing a buried mismatch (T:T followed by C:G base pairs), the 3' base was removed at a rate of 3 x s(-1). The addition of nucleotide to the reaction that is identical to the 3' base increased the rate of excision 7-fold to 21 x s(-1). We propose that the free nucleotide enhances the rate of transfer of the DNA to the exonuclease active site by interrupting the correct 3' base pair through interaction with the template base. The exonuclease contribution to fidelity is minimal if the calculation is based on hydrolysis of a single mismatch: (k(exo) + k(pol,over))/(k(pol,over)) = 10, but this value increases to approximately 200 when examining error correction in the presence of nucleotides.