Isolation and characterization of 101-succinimide lysozyme that possesses the cyclic imide at Asp101-Gly102

Deuterium Labeling of Isoaspartic and Isoglutamic Acids for Mass Spectrometry Analysis

Isoaspartic acid (isoAsp) is a common protein modification that spontaneously arises from asparagine or aspartic acid and has been linked to various diseases and health conditions. However, current methods for identifying isoAsp sites in proteins often suffer from ambiguity and have not gained widespread adoption. We developed a novel method that exclusively labels isoAsp with deuterium. This method capitalizes on the unique structural characteristics of isoAsp residues, which possess a free α-carboxyl group and can form an oxazolone ring. Once the oxazolone ring forms, it facilitates racemization at the Cα-position, incorporating a deuteron from a D2O solvent. The sites of deuterium-incorporated isoAsp in proteins can be unequivocally determined by comparing the precursor and product ion masses of the peptides from proteins reacted in H2O and D2O. The effectiveness of this method has been demonstrated through its application to model proteins lysozyme and rituximab. Furthermore, we have confirmed that the isoAsp deuterium-labeling reaction efficiently labels both l- and d-isoAsp without distinction, as well as isoglutamic acid (isoGlu), for which no effective detection methods currently exist.

[Modulation of Aggregation and Immunogenicity of a Protein: Based on the Study of Hen Lysozyme]

This study focuses on the modulation of protein aggregation and immunogenicity. As a starting point for investigating long-range interactions within a non-native protein, the effects of perturbing denatured protein states on their aggregation, including the formation of amyloid fibrils, were evaluated. The effects of adducts, sugar modifications, and stabilization on protein aggregation were then examined. We also investigated how protein immunogenicity was affected by enhancing protein conformational stability and other factors.

Structural Analysis of Hen Egg Lysozyme Refolded after Denaturation at Acidic pH

Protein structures fluctuate in solution; therefore, proteins have multiple stable structures that are slightly different from each other. In this study, we determined the crystal structure of hen egg lysozyme refolded after denaturation at acidic pH (rHEL) and found a structure different from native HEL (nHEL). The different local conformations of the peptide bond between Asp101 and Gly102 found in the crystal structure was supported by the NMR results for nHEL and rHEL. The NMR experiments also showed shifts in the heteronuclear single quantum coherence signals derived from Thr43 and Asp52. The chemical shift change of Asp52 could be explained by the crystal structure of rHEL, showing the conformational change of Tyr53, whose phenol ring directly lies on the main chain of Asp52. The catalytic activity of rHEL was similar to that of nHEL, indicating that the conformational change had little effect on activity. In contrast, conformational changes could be detected by the binding of monoclonal antibodies against HEL. Using multiple methods, we successfully detected the unusual structure of HEL, which might be another stable structure of HEL in solution.

Detecting aspartate isomerization and backbone cleavage after aspartate in intact proteins by NMR spectroscopy

The monitoring of non-enzymatic post-translational modifications (PTMs) in therapeutic proteins is important to ensure drug safety and efficacy. Together with methionine and asparagine, aspartic acid (Asp) is very sensitive to spontaneous alterations. In particular, Asp residues can undergo isomerization and peptide-bond hydrolysis, especially when embedded in sequence motifs that are prone to succinimide formation or when followed by proline (Pro). As Asp and isoAsp have the same mass, and the Asp-Pro peptide-bond cleavage may lead to an unspecific mass difference of + 18 Da under native conditions or in the case of disulfide-bridged cleavage products, it is challenging to directly detect and characterize such modifications by mass spectrometry (MS). Here we propose a 2D NMR-based approach for the unambiguous identification of isoAsp and the products of Asp-Pro peptide-bond cleavage, namely N-terminal Pro and C-terminal Asp, and demonstrate its applicability to proteins including a therapeutic monoclonal antibody (mAb). To choose the ideal pH conditions under which the NMR signals of isoAsp and C-terminal Asp are distinct from other random coil signals, we determined the pK_a values of isoAsp and C-terminal Asp in short peptides. The characteristic ¹H-¹³C chemical shift correlations of isoAsp, N-terminal Pro and C-terminal Asp under standardized conditions were used to identify these PTMs in lysozyme and in the therapeutic mAb rituximab (MabThera) upon prolonged storage under acidic conditions (pH 4-5) and 40 °C. The results show that the application of our 2D NMR-based protocol is straightforward and allows detecting chemical changes of proteins that may be otherwise unnoticed with other analytical methods.

Complete NMR Assignment of Succinimide and Its Detection and Quantification in Peptides and Intact Proteins

Detecting and quantifying post-translational modifications (PTMs) in full-length proteins is a challenge, especially in the case of spontaneously occurring, nonenzymatic PTMs. Such a PTM is the formation of succinimide (Snn) in a protein that occurs spontaneously in prone primary sequences and leads typically to an equilibrium between Snn and its hydrolysis products isoaspartate (isoAsp) and aspartate. In order to detect these modifications in proteins by NMR spectroscopy, chemical shift assignments of reference compounds are required. We used peptide synthesis and 2D NMR spectroscopy to assign all ¹H and ¹³C chemical shifts of Snn and isoAsp and found characteristic chemical shift correlations. To provide chemical shift reference data suitable for comparison with data of denatured proteins, we repeated the assignment in 7 M urea (pH 2.3) and in DMSO. Most characteristic of Snn are the two downfield shifted carbonyl chemical shifts, the chemical shift correlations of Cβ-Hβ of Snn and Cα-Hα of the succeeding residue which are clearly distinct from random coil chemical shift correlations. The characteristic 2D NMR fingerprints of Snn were used to detect and quantify this PTM in the model protein lysozyme, the biotherapeutic filgrastim, and the Fc part of immunoglobulin G1. Mass spectrometry (MS) was applied as an additional independent method. The orthogonality of the NMR and MS techniques allows cross-validation, which is especially important to search for subtle PTMs in proteins. Studying PTMs by NMR spectroscopy is a promising method to analyze proteins and peptides from natural sources, recombinant expression, or chemical synthesis.

Characterization of succinimide stability during trypsin digestion for LC-MS analysis

LC-MS peptide mapping is the most commonly used method to analyze protein modifications. The proteins are generally digested using trypsin at a slightly basic pH at 37 °C from several hours to overnight. Assay-induced artifacts can be generated during this procedure, potentially causing false-positive or false-negative results for a given modification. Unfortunately, for the analysis of succinimide, both false-negative and false-positive results can be generated within the same procedure. This study evaluates the stability of succinimide during the peptide mapping procedure and has demonstrated that up to 13% of pre-existing succinimide was lost during a 4 h trypsin digestion at pH 5.0 which was previously determined to be optimal for the detection of succinimide. The same procedure was able to simultaneously generate approximately 3% succinimide. Using the optimized procedure, it was also found that two aspartate residues that are followed by glycine residues in the conserved Fc region of a recombinant monoclonal antibody were not prone to isomerization. On the other hand, an aspartate residue followed by a glycine in the heavy chain variable domain was highly susceptible to isomerization. Interestingly, the antibody containing the succinimide eluted from an SEC column after the monomer peak.

Unexpected functional implication of a stable succinimide in the structural stability of Methanocaldococcus jannaschii glutaminase

Protein ageing is often mediated by the formation of succinimide intermediates. These short-lived intermediates derive from asparaginyl deamidation and aspartyl dehydration and are rapidly converted into β-aspartyl or D-aspartyl residues. Here we report the presence of a highly stable succinimide intermediate in the glutaminase subunit of GMP synthetase from the hyperthermophile Methanocaldoccocus jannaschii. By comparing the biophysical properties of the wild-type protein and of several mutants, we show that the presence of succinimide increases the structural stability of the glutaminase subunit. The protein bearing this modification in fact remains folded at 100 °C and in 8 M guanidinium chloride. Mutation of the residue following the reactive asparagine provides insight into the factors that contribute to the hydrolytic stability of the succinimide. Our findings suggest that sequences that stabilize succinimides from hydrolysis may be evolutionarily selected to confer extreme thermal stability.

Succinimide is a post-translational modification susceptible to rapid hydrolysis and generally associated with protein destabilisation. Here, the authors use mass spectroscopy to identify a stable succinimide intermediate that is responsible for the high thermostability of a thermophilic enzyme.

Acetic acid can catalyze succinimide formation from aspartic acid residues by a concerted bond reorganization mechanism: a computational study

Succinimide formation from aspartic acid (Asp) residues is a concern in the formulation of protein drugs. Based on density functional theory calculations using Ace-Asp-Nme (Ace = acetyl, Nme = NHMe) as a model compound, we propose the possibility that acetic acid (AA), which is often used in protein drug formulation for mildly acidic buffer solutions, catalyzes the succinimide formation from Asp residues by acting as a proton-transfer mediator. The proposed mechanism comprises two steps: cyclization (intramolecular addition) to form a gem-diol tetrahedral intermediate and dehydration of the intermediate. Both steps are catalyzed by an AA molecule, and the first step was predicted to be rate-determining. The cyclization results from a bond formation between the amide nitrogen on the C-terminal side and the side-chain carboxyl carbon, which is part of an extensive bond reorganization (formation and breaking of single bonds and the interchange of single and double bonds) occurring concertedly in a cyclic structure formed by the amide NH bond, the AA molecule and the side-chain C=O group and involving a double proton transfer. The second step also involves an AA-mediated bond reorganization. Carboxylic acids other than AA are also expected to catalyze the succinimide formation by a similar mechanism.

Detection and quantitation of succinimide in intact protein via hydrazine trapping and chemical derivatization

The formation of aspartyl succinimide is a common post-translational modification of protein pharmaceuticals under acidic conditions. We present a method to detect and quantitate succinimide in intact protein via hydrazine trapping and chemical derivatization. Succinimide, which is labile under typical analytical conditions, is first trapped with hydrazine to form stable hydrazide and can be directly analyzed by mass spectrometry. The resulting aspartyl hydrazide can be selectively derivatized by various tags, such as fluorescent rhodamine sulfonyl chloride that absorbs strongly in the visible region (570 nm). Our tagging strategy allows the labeled protein to be analyzed by orthogonal methods, including HPLC-UV-Vis, liquid chromatography mass spectrometry (LC-MS), and SDS-PAGE coupled with fluorescence imaging. A unique advantage of our method is that variants containing succinimide, after derivatization, can be readily resolved via either affinity enrichment or chromatographic separation. This allows further investigation of individual factors in a complex protein mixture that affect succinimide formation. Some additional advantages are imparted by fluorescence labeling including the facile detection of the intact protein without proteolytic digestion to peptides; and high sensitivity, for example, without optimization, 0.41% succinimide was readily detected. As such, our method should be useful for rapid screening, optimization of formulation conditions, and related processes relevant to protein pharmaceuticals.

Structure-based prediction of asparagine and aspartate degradation sites in antibody variable regions

Monoclonal antibodies (mAbs) and proteins containing antibody domains are the most prevalent class of biotherapeutics in diverse indication areas. Today, established techniques such as immunization or phage display allow for an efficient generation of new mAbs. Besides functional properties, the stability of future therapeutic mAbs is a key selection criterion which is essential for the development of a drug candidate into a marketed product. Therapeutic proteins may degrade via asparagine (Asn) deamidation and aspartate (Asp) isomerization, but the factors responsible for such degradation remain poorly understood. We studied the structural properties of a large, uniform dataset of Asn and Asp residues in the variable domains of antibodies. Their structural parameters were correlated with the degradation propensities measured by mass spectrometry. We show that degradation hotspots can be characterized by their conformational flexibility, the size of the C-terminally flanking amino acid residue, and secondary structural parameters. From these results we derive an accurate in silico prediction method for the degradation propensity of both Asn and Asp residues in the complementarity-determining regions (CDRs) of mAbs.

Succinimidyl residue formation in hen egg-white lysozyme favors the formation of intermolecular covalent bonds without affecting its tertiary structure

Protein chemical degradations occur naturally into living cells as soon as proteins have been synthesized. Among these modifications, deamidation of asparagine or glutamine residues has been extensively studied, whereas the intermediate state, a succinimide derivative, was poorly investigated because of the difficulty of isolating those transient species. We used an indirect method, a limited thermal treatment in the dry state at acidic pH, to produce stable cyclic imide residues in hen lysozyme molecules, enabling us to examine the structural and functional properties of so modified proteins. Five cyclic imide rings have been located at sites directly accessible to solvent and did not lead to any changes in secondary or tertiary structures. However, they altered the catalytic properties of lysozyme and significantly decreased the intrinsic stability of the molecules. Moreover, dimerization occurred during the treatment, and this phenomenon was proportional to the extent of chemical degradation. We propose that succinimide formation could be responsible for covalent bond formation under specific physicochemical conditions that could be found in vivo.

Stability of protein pharmaceuticals: an update

In 1989, Manning, Patel, and Borchardt wrote a review of protein stability (Manning et al., Pharm. Res. 6:903-918, 1989), which has been widely referenced ever since. At the time, recombinant protein therapy was still in its infancy. This review summarizes the advances that have been made since then regarding protein stabilization and formulation. In addition to a discussion of the current understanding of chemical and physical instability, sections are included on stabilization in aqueous solution and the dried state, the use of chemical modification and mutagenesis to improve stability, and the interrelationship between chemical and physical instability.

Improved lysozyme stability and release properties of poly(lactide-co-glycolide) implants prepared by hot-melt extrusion

PURPOSE

To assess the feasibility of hot-melt extrusion (HME) for preparing implants based on protein/poly(lactide-co-glycolide) (PLGA) formulations with special emphasis on protein stability, burst release and release completeness.

METHOD

Model protein (lysozyme)-loaded PLGA implants were prepared with a screw extruder and a self-built syringe-die device as a rapid screening tool for HME formulation optimization. Lysozyme stability was determined using DSC, FTIR, HPLC and biological activity. The simultaneous effect of lysozyme and PEG loadings was investigated to obtain optimized formulations with high drug loading but low initial release.

RESULTS

Lysozyme was recovered from implants with full biological activity after HME. The release from all implants reached the 100% value in 60-80 days with nearly complete enzymatic activity of the last fraction of released lysozyme. Pure PLGA implants with up to 20% lysozyme loading could be formulated without initial burst. The incorporation of PEG 400 reduced the initial burst at drug loadings in excess of 20%.

CONCLUSION

A complete lysozyme recovery in active form with a burst-free and complete release from PLGA implants prepared by hot-melt extrusion was obtained. This is in contrast to many reported microparticulate lysozyme-PLGA systems and suggests the great potential of hot-melt extrusion for the preparation of protein-PLGA implants.

Accumulation of Succinimide in a Recombinant Monoclonal Antibody in Mildly Acidic Buffers Under Elevated Temperatures

PURPOSE

The purpose of this paper was to identify the location of a succinimide and determine the rate of its formation and hydrolysis in a recombinant human monoclonal IgG2 antibody aged in mildly acidic buffers at elevated temperatures.

MATERIALS AND METHODS

Cation exchange (CEX) HPLC separated multiple Main Peaks and high levels (up to 50%) of basic variants, the identification of which was an analytical challenge and required several complementary techniques. The relative abundance of the CEX basic variants was used to quantify the percentage of succinimide and to study the rates of its formation and hydrolysis.

RESULTS

Mass decrease by approximately 18 Da for intact antibodies from the CEX basic fractions suggested succinimide formation from aspartic acid as the major modification. Reversed-phase HPLC/MS of the reduced and trypsin-digested samples detected an isoaspartate 30 (isoD30) in the light chain peptide A25-R37. Direct evidence that isoD30 was from succinimide was obtained by performing succinimide hydrolysis in H2(18)O followed by tryptic digestion in H2(16)O.

CONCLUSIONS

Succinimide formation increased as pH became more acidic, whereas its hydrolysis was faster as pH became neutral and alkaline. Succinimide hydrolysis in a denatured sample was estimated to have completed in less than 2 h, but approximately three days for a similar pH but without denaturant. These observations suggest that protein conformation affects succinimide hydrolysis.

A Highly Amyloidogenic Region of Hen Lysozyme

Amyloid fibrils obtained after incubating hen egg-white lysozyme (HEWL) at pH 2.0 and 65 degrees C for extended periods of time have been found to consist predominantly of fragments of the protein corresponding to residues 49-100, 49-101, 53-100 and 53-101, derived largely from the partial acid hydrolysis of Asp-X peptide bonds. These internal fragments of HEWL encompass part of the beta-domain and all the residues forming the C-helix in the native protein, and contain two internal disulfide bridges Cys64-Cys80 and Cys76-Cys94. The complementary protein fragments, including helices A, B and D of the native protein, are not significantly incorporated into the network of fibrils, but remain largely soluble, in agreement with their predicted lower propensities to aggregate. Further analysis of the properties of different regions of HEWL to form amyloid fibrils was carried out by studying fragments produced by limited proteolysis of the protein by pepsin. Here, we show that only fragment 57-107, but not fragment 1-38/108-129, is able to generate well-defined amyloid fibrils under the conditions used. This finding is of particular importance, as the beta-domain and C-helix of the highly homologous human lysozyme have been shown to unfold locally in the amyloidogenic variant D67H, which is associated with the familial cases of systemic amyloidosis linked to lysozyme deposition. The identification of the highly amyloidogenic character of this region of the polypeptide chain provides strong support for the involvement of partially unfolded species in the initiation of the aggregation events that lead to amyloid deposition in clinical disease.

Formation of an RNase A derivative containing an aminosuccinyl residue in place of asparagine 67

At acidic pH, Asp67 and beta-Asp67 (beta-Asp: isoaspartic acid residue) derivatives of RNase A, obtained by selective deamidation of the parent enzyme, spontaneously produces a new derivative containing an aminosuccinyl residue (Asu). The overall secondary structure of the protein chain does not change as a consequence of this substitution, while the catalytic activity on RNA is reduced to about 25%. The pH dependence of the first-order rate constants for the Asu formation has a bell-shaped profile, the maximum being close to the pK(a) of the aspartic acid side chains. Moreover, the values of the rate constants are of the same magnitude of those measured for Asp-containing peptides whose sequence mimics the Asu formation site of the enzyme. This feature indicates that Asp67 and beta-Asp67 residues in the deamidated RNase A derivatives are sited in a region flexible enough to permit the cyclization of the carboxylic side chain to succinimide ring. These results are discussed at the light on to the three-dimensional structure and the thermodynamic stability of the aspartic acid derivatives of RNase A.

A helix-loop-helix peptide at the upper lip of the active site cleft of lysozyme confers potent antimicrobial activity with membrane permeabilization action

Recently, we have found that partially unfolded lysozyme exerts broad spectrum antimicrobial action in vitro against Gram-negative and Gram-positive bacteria independent of its catalytic activity. In parallel, an internal peptide (residues 98-112) of hen egg white lysozyme, obtained after digestion with clostripain, possessed broad spectrum antimicrobial action in vitro. This internal peptide is part of a helix-loop-helix domain (87-114 sequence of hen lysozyme) located at the upper lip of the active site cleft of lysozyme. The helix-loop-helix (HLH) structures are known motifs commonly found in membrane-active and DNA-binding proteins. To evaluate the contribution of the HLH peptide to the antimicrobial properties of lysozyme, the HLH sequence and its secondary structure derivatives of chicken and human lysozyme were synthesized and tested for antimicrobial activity against several bacterial strains. We found that the full HLH peptide of both chicken and human lysozymes was potently microbicidal against both Gram-positive and Gram-negative bacteria and the fungus Candida albicans. The N-terminal helix of HLH was specifically bactericidal to Gram-positive bacteria, whereas the C-terminal helix was bactericidal to all tested strains. Outer and inner membrane permeabilization studies, as well as measurements of transmembrane electrochemical potentials, provided evidence that HLH peptide and its C-terminal helix domain kill Gram-negative bacteria by crossing the outer membrane via self-promoted uptake and causing damage to the inner membrane through channel formation. The results are discussed in terms of proposed mechanisms for the catalytically independent antimicrobial activity of lysozyme that offer a new strategy for the design of potential antimicrobial drugs in the treatment of infectious diseases.

Identification of multiple sources of charge heterogeneity in a recombinant antibody

Seven forms of a therapeutic recombinant antibody that binds to the her2/neu gene product were resolved by cation-exchange chromatography. Structural differences were assigned by peptide mapping and HIC after papain digestion. Deamidation of light chain asparagine 30 to aspartate in one or both light chains is responsible for two acidic forms. A low potency form is due to isomerization of heavy chain aspartate 102; the Asp102 succinimide is also present in a basic peak fraction. Forms with both Asn30 deamidation and Asp102 isomerization modifications were isolated. Deamidation of heavy chain Asn55 to isoaspartate was also detected. Isoelectric focusing in a polyacrylamide gel was used to verify the assignments. All modifications were found in complementarity determining regions.

Crystal structure of protein isoaspartyl methyltransferase: a catalyst for protein repair

BACKGROUND

Formation of isoaspartyl residues is one of several processes that damage proteins as they age. Protein L-isoaspartate (D-aspartate) O-methyltransferase (PIMT) is a conserved and nearly ubiquitous enzyme that catalyzes the repair of proteins damaged by isoaspartyl formation.

RESULTS

We have determined the first structure of a PIMT from crystals of the T. maritima enzyme complexed to S-adenosyl-L-homocysteine (AdoHcy) and refined it to 1.8 A resolution. Although PIMT forms one structural unit, the protein can be divided functionally into three subdomains. The central subdomain closely resembles other S-adenosyl-L-methionine-dependent methyltransferases but bears a striking alteration of topological connectivity, which is not shared by any other member of this family. Rather than arranged as a mixed beta sheet with topology 6 upward arrow7 downward arrow5 upward arrow4 upward arrow1 upward arrow2 upward arrow3 upward arrow, the central sheet of PIMT is reorganized to 7 upward arrow6 downward arrow5 upward arrow4 upward arrow1 upward arrow2 upward arrow3 upward arrow. AdoHcy is largely buried between the N-terminal and central subdomains by a conserved and largely hydrophobic loop on one rim of the binding cleft, and a conserved Ser/Thr-rich beta strand on the other. The Ser/Thr-rich strand may provide hydrogen bonds for specific interactions with isoaspartyl substrates. The side chain of Ile-206, a conserved residue, crosses the cleft, restricting access to the donor methyl group to a deep well, the putative isoaspartyl methyl acceptor site.

CONCLUSIONS

The structure of PIMT reveals a unique modification of the methyltransferase fold along with a site for specific recognition of isoaspartyl substrates. The sequence conservation among PIMTs suggests that the current structure should prove a reliable model for understanding the repair of isoaspartyl damage in all organisms.

Identification of Asp95 as the site of succinimide formation in recombinant human glial cell line-derived neurotrophic factor

Human glial cell line-derived neurotrophic factor is a single polypeptide of 134 amino acids and functions as a disulfide-linked dimer. Incubation of the protein in pH 5.0 and at 37 degreesC for 1 week showed that 5% of the material was converted to a form that eluted after the major protein peak on a cation-exchange column. The modified component gave an average molecular mass of 30367.0 u (theoretical = 30384.8 u). Within measurement error, this 17.8-u decrease in mass indicated the loss of a water molecule. This observation, together with the protein's behavior on cation-exchange chromatography and the mode of incubation used to generate the modification, was consistent with cyclic imide (succinimide) formation at an aspartyl residue. Hence, only a monomer of the dimeric protein was modified. The modified monomer was purified and subjected to peptic degradation. By a combination of N-terminal analysis and mass spectrometry, the region containing Asp95-Lys96 was identified to be modified. This was further confirmed by carboxypeptidase Y digestion of the modified peptide where the modified region was found to be resistant to further enzymatic degradation. Furthermore, incubation of the modified monomer in pH 8. 5 for 2 h yielded two peaks, in agreement with the succinimide model where the cyclic imide was hydrolyzed into a mixture of isoaspartate and aspartate. Tryptic mapping of the isoaspartyl-containing protein showed that Asp95 was refractory to Edman degradation, confirming it was in the isoaspartate form. Hence, the modification observed was due to succinimide formation at Asp95. This is the first report of succinimide formation at an Asp-Lys linkage.

Succinimide and isoaspartate residues in the crystal structures of hen egg-white lysozyme complexed with tri-N-acetylchitotriose

The isomerization of Asp101 to isoaspartate autocatalytically proceeds via a succinimide intermediate in hen egg-white lysozyme at a mildly acidic condition. The crystal structures of succinimide and isoaspartate forms of the lysozyme proteins, each complexed with a tri-N-acetylchitotriose ligand, have been determined at 1.8 A resolution, and distinctively elucidate coplanar cyclic aminosuccinyl and beta-linked isoaspartyl residues. Compared with the liganded native protein with normal Asp101, succinimide 101 protrudes toward the ligand, and isoaspartate 101 extends away from the ligand. The formations of these residues caused the loss of three hydrogen-bonds between the ligand and the side-chains of Asp101 and Asn103 along with 0.5 A displacement of the ligand location.

Engineering of lysozyme

As the most extensively investigated model protein, the protein engineering of lysozyme is described. By utilizing modifications made possible by chemical or gene engineering methods, we can get a better understanding of protein behaviour and we can also improve their properties. The results of the protein engineering of lysozyme are described, which give some ideas for a better understanding of the physiological function of proteins, their stabilization, and how to engineer a novel protein.