Recognition of fibronectin by the platelet integrin alpha IIb beta 3 involves an extended interface with multiple electrostatic interactions

A fibronectin mimetic motif improves integrin mediated cell biding to recombinant spider silk matrices

The cell binding motif RGD is the most widely used peptide to improve cell binding properties of various biomaterials, including recombinant spider silk. In this paper we use genetic engineering to further enhance the cell supportive capacity of spider silk by presenting the RGD motif as a turn loop, similar to the one found in fibronectin (FN), but in the silk stabilized by cysteines, and therefore denoted FNCC. Human primary cells cultured on FNCC-silk showed increased attachment, spreading, stress fiber formation and focal adhesions, not only compared to RGD-silk, but also to silk fused with linear controls of the RGD containing motif from fibronectin. Cell binding to FNCC-silk was shown to involve the α5β1 integrin, and to support proliferation and migration of keratinocytes. The FNCC-silk protein allowed efficient assembly, and could even be transformed into free standing films, on which keratinocytes could readily form a monolayer culture. The results hold promise for future applications within tissue engineering.

Extra-domain B in oncofetal fibronectin structurally promotes fibrillar head-to-tail dimerization of extracellular matrix protein

The type III extra-domain B (ED-B) is specifically spliced into fibronectin (Fn) during embryogenesis and neoangiogenesis, including many cancers. The x-ray structure of the recombinant four-domain fragment Fn(III)7B89 reveals a tightly associated, extended head-to-tail dimer, which is stabilized via pair-wise shape and charge complementarity. A tendency toward ED-B-dependent dimer formation in solution was supported by size exclusion chromatography and analytical ultracentrifugation. When amending the model with the known three-dimensional structure of the Fn(III)10 domain, its RGD loop as well as the adhesion synergy region in Fn(III)9-10 become displayed on the same face of the dimer; this should allow simultaneous binding of at least two integrins and, thus, receptor clustering on the cell surface and intracellular signaling. Insertion of ED-B appears to stabilize overall head-to-tail dimerization of two separate Fn chains, which, together with alternating homodimer formation via disulfide bridges at the C-terminal Fn tail, should lead to the known macromolecular fibril formation.

Plasma and cellular fibronectin: distinct and independent functions during tissue repair

Fibronectin (FN) is a ubiquitous extracellular matrix (ECM) glycoprotein that plays vital roles during tissue repair. The plasma form of FN circulates in the blood, and upon tissue injury, is incorporated into fibrin clots to exert effects on platelet function and to mediate hemostasis. Cellular FN is then synthesized and assembled by cells as they migrate into the clot to reconstitute damaged tissue. The assembly of FN into a complex three-dimensional matrix during physiological repair plays a key role not only as a structural scaffold, but also as a regulator of cell function during this stage of tissue repair. FN fibrillogenesis is a complex, stepwise process that is strictly regulated by a multitude of factors. During fibrosis, there is excessive deposition of ECM, of which FN is one of the major components. Aberrant FN-matrix assembly is a major contributing factor to the switch from normal tissue repair to misregulated fibrosis. Understanding the mechanisms involved in FN assembly and how these interplay with cellular, fibrotic and immune responses may reveal targets for the future development of therapies to regulate aberrant tissue-repair processes.

Response of blood platelets to beta-glucan from Saccharomyces cerevisiae

The effects of the beta-D-glucan, a polysaccharide derived from the yeast cell walls of species such as Saccharomyces cerevisiae, on blood platelets activation induced by physiological agonists (thrombin, ADP, collagen) in vitro were studied. The aim of our study was to assess in vitro if beta-glucan, a naturally strong biological response modifier, may modify platelet activation, i.e. platelet aggregation and degranulation (release of proteins and adenine nucleotides) induced by thrombin, ADP and collagen. Cytochrome c reduction method was used to test the ability of beta-glucan to change superoxide anion generation in platelets. Moreover, we determined also its effect on enzymatic arachidonic acid cascade. The obtained results indicate that beta-glucan has the inhibitory effects on platelet aggregation and secretion. beta-glucan distinctly reduced the arachidonic acid pathway and superoxide anion radical generation in platelets stimulated by biological agonists. The results of the present study suggest that beta-glucan from Saccharomyces cerevisiae has antiplatelet and antioxidative activities, and therefore may be beneficial in the prevention of the excessive blood platelet activation-related diseases, such as cardiovascular or inflammatory diseases.

Arylsulfatase B regulates colonic epithelial cell migration by effects on MMP9 expression and RhoA activation

Arylsulfatase B (ASB; N-acetylgalactosamine-4-sulfatase; 4-sulfatase; ARSB) is the enzyme that removes 4-sulfate groups from N-acetylgalactosamine 4-sulfate, which combines with glucuronate to form the disaccharide unit of chondroitin-4-sulfate (C4S). In this study, we report how variation in expression of ASB affected the migration of human colonic epithelial cells. In the T84 cell line, derived from lung metastasis of malignant colonic epithelial cells, the activity of ASB, as well as steroid sulfatase, arylsulfatase A, and galactose-6-sulfatase, were significantly less than in normal, primary colonic epithelial cells and in the NCM460 cell line which was derived from normal colonocytes. In the T84 cells, matrix metalloproteinase 9 (MMP9), activated RhoA, and cell migration, as well as C4S content, were significantly more than in the NCM460 cells. Silencing and overexpression of ASB had inverse effects on MMP9, activated RhoA, and cell migration, as well as the C4S content, in the NCM460 and T84 cells. When ASB expression was silenced by siRNA in the NCM460 cells, MMP9 secretion increased to over 3 times the basal level, activated RhoA increased * 85%, and cell migration increased * 52%. Following overexpression of ASB, MMP9 declined 51%, activated RhoA declined * 51%, and cell migration decreased * 37%. These findings demonstrate marked effects of ASB expression on the migratory activity of colonic epithelial cells, activated RhoA, and MMP9, and suggest a potential vital role of ASB, due to its impact on chondroitin sulfation, on determination of the invasive phenotype of colonic epithelial cells.

Importance of a N-terminal aspartate in the internalization of the neuropeptide Y Y2 receptor

With human neuropeptide Y Y2 receptor expressed in the Chinese hamster ovary (CHO) cells, the Asp35Ala mutation, and especially the change of Pro34Asp35 to Ala34Ala35, decrease the compartmentalization and strongly accelerate internalization of the receptor. These changes are not associated with alterations in agonist affinity, G-protein interaction, dimerization, or level of expression of the mutated receptors relative to the wildtype receptor. The proline-flanked aspartate in the N-terminal extracellular segment of the neuropeptide Y Y2 receptor thus apparently has a large role in anchoring and compartmentalization of the receptor. However, the Pro34Ala mutation does not significantly affect the embedding and cycling of the receptor.

Fibronectin unfolding revisited: modeling cell traction-mediated unfolding of the tenth type-III repeat

Fibronectin polymerization is essential for the development and repair of the extracellular matrix. Consequently, deciphering the mechanism of fibronectin fibril formation is of immense interest. Fibronectin fibrillogenesis is driven by cell-traction forces that mechanically unfold particular modules within fibronectin. Previously, mechanical unfolding of fibronectin has been modeled by applying tensile forces at the N- and C-termini of fibronectin domains; however, physiological loading is likely focused on the solvent-exposed RGD loop in the 10^th type-III repeat of fibronectin (10FNIII), which mediates binding to cell-surface integrin receptors. In this work we used steered molecular dynamics to study the mechanical unfolding of 10FNIII under tensile force applied at this RGD site. We demonstrate that mechanically unfolding 10FNIII by pulling at the RGD site requires less work than unfolding by pulling at the N- and C- termini. Moreover, pulling at the N- and C-termini leads to 10FNIII unfolding along several pathways while pulling on the RGD site leads to a single exclusive unfolding pathway that includes a partially unfolded intermediate with exposed hydrophobic N-terminal β-strands – residues that may facilitate fibronectin self-association. Additional mechanical unfolding triggers an essential arginine residue, which is required for high affinity binding to integrins, to move to a position far from the integrin binding site. This cell traction-induced conformational change may promote cell detachment after important partially unfolded kinetic intermediates are formed. These data suggest a novel mechanism that explains how cell-mediated forces promote fibronectin fibrillogenesis and how cell surface integrins detach from newly forming fibrils. This process enables cells to bind and unfold additional fibronectin modules – a method that propagates matrix assembly.

Designing an extracellular matrix protein with enhanced mechanical stability

The extracellular matrix proteins tenascin and fibronectin experience significant mechanical forces in vivo. Both contain a number of tandem repeating homologous fibronectin type III (fnIII) domains, and atomic force microscopy experiments have demonstrated that the mechanical strength of these domains can vary significantly. Previous work has shown that mutations in the core of an fnIII domain from human tenascin (TNfn3) reduce the unfolding force of that domain significantly: The composition of the core is apparently crucial to the mechanical stability of these proteins. Based on these results, we have used rational redesign to increase the mechanical stability of the 10th fnIII domain of human fibronectin, FNfn10, which is directly involved in integrin binding. The hydrophobic core of FNfn10 was replaced with that of the homologous, mechanically stronger TNfn3 domain. Despite the extensive substitution, FNoTNc retains both the three-dimensional structure and the cell adhesion activity of FNfn10. Atomic force microscopy experiments reveal that the unfolding forces of the engineered protein FNoTNc increase by approximately 20% to match those of TNfn3. Thus, we have specifically designed a protein with increased mechanical stability. Our results demonstrate that core engineering can be used to change the mechanical strength of proteins while retaining functional surface interactions.

The synergy site of fibronectin is required for strong interaction with the platelet integrin alphaIIbbeta3

Integrins are a class of cell adhesion molecules that bind to ligands containing the RGD peptide sequence. There is increasing evidence that peptide sites other than the RGD site are required for optimal binding of integrins with their ligands. We have examined the sites on the protein fibronectin that are needed for optimal binding to the platelet integrin alphaIIbbeta3 using a strategy of site directed mutagenesis. Single amino acids near the RGD site or near the synergy site of fibronectin were mutated and the resultant proteins were expressed in a bacterial expression system. The purified protein was coated onto glass cover slips. Platelets, expressing alphaIIbbeta3 were perfused over the surface at physiologically relevant shear rates and the extent of adhesion was quantified. We found that the single amino acid substitution of the aspartic acid in the RGD sequence, D1495A, completely abolished adhesion. Surprisingly, the mutants R1445A and R1448Q that are near the RGD site also abolished adhesion of platelets under flow. Additionally, the synergy site mutants R1371A, R1374Q, or R1379A displayed only minimal adhesion of platelets. These results show that the binding site for alphaIIbbeta3 on fibronectin extends over a considerable distance from the RGD site and that these distant sites are required for optimal attachment of cells in the presence of physiologically relevant shear stress.

Fibronectin-binding proteins of Staphylococcus aureus mediate activation of human platelets via fibrinogen and fibronectin bridges to integrin GPIIb/IIIa and IgG binding to the FcgammaRIIa receptor

Staphylococcus aureus is a leading cause of infective endocarditis (IE). Platelet activation promoted by S. aureus resulting in aggregation and thrombus formation is an important step in the pathogenesis of IE. Here, we report that the fibrinogen/fibronectin-binding proteins FnBPA and FnBPB are major platelet-activating factors on the surface of S. aureus from the exponential phase of growth. Truncated derivatives of FnBPA, presenting either the fibrinogen-binding A domain or the fibronectin-binding BCD region, each promoted platelet activation when expressed on the surface of S. aureus or Lactococcus lactis, indicating two distinct mechanisms of activation. FnBPA-promoted platelet activation is mediated by fibrinogen and fibronectin bridges between the A domain and the BCD domains, respectively, to the low affinity form of the integrin GPIIb/IIIa on resting platelets. Antibodies recognizing the FnBPA A domain or the complex between the FnBPA BCD domains and fibronectin were essential for activation promoted by bacteria expressing the A domain or the BCD domain respectively. Activation was inhibited by a monoclonal antibody (IV-3) specific for the FcgammaRIIa IgG receptor on platelets. We propose that the activation of quiescent platelets by bacteria expressing FnBPs involves the formation of a bridge between the bacterial cell and the platelet surface by (i) fibronectin and fibrinogen interacting with the low affinity form of GPIIb/IIIa and (ii) by antibodies specific to FnBPs that engage the platelet Fc receptor FcgammaRIIa. Platelet activation by S. aureus clinical IE isolates from both the exponential and stationary phases of growth was completely inhibited by monoclonal antibody IV-3 suggesting that the IgG-FcgammaRIIa interaction is of fundamental importance for platelet activation mediated by this organism. This suggests new avenues for development of therapeutics against vascular infections.

Nanoparticle-induced platelet aggregation and vascular thrombosis

Ever increasing use of engineered carbon nanoparticles in nanopharmacology for selective imaging, sensor or drug delivery systems has increased the potential for blood platelet-nanoparticle interactions. We studied the effects of engineered and combustion-derived carbon nanoparticles on human platelet aggregation in vitro and rat vascular thrombosis in vivo. Multiplewall (MWNT), singlewall (SWNT) nanotubes, C60 fullerenes (C60CS) and mixed carbon nanoparticles (MCN) (0.2-300 microg ml(-1)) were investigated. Nanoparticles were compared with standard urban particulate matter (SRM1648, average size 1.4 microm). Platelet function was studied using lumi aggregometry, phase-contrast, immunofluorescence and transmission electron microscopy, flow cytometry, zymography and pharmacological inhibitors of platelet aggregation. Vascular thrombosis was induced by ferric chloride and the rate of thrombosis was measured, in the presence of carbon particles, with an ultrasonic flow probe. Carbon particles, except C60CS, stimulated platelet aggregation (MCN>or=SWNT>MWNT>SRM1648) and accelerated the rate of vascular thrombosis in rat carotid arteries with a similar rank order of efficacy. All particles resulted in upregulation of GPIIb/IIIa in platelets. In contrast, particles differentially affected the release of platelet granules, as well as the activity of thromboxane-, ADP, matrix metalloproteinase- and protein kinase C-dependent pathways of aggregation. Furthermore, particle-induced aggregation was inhibited by prostacyclin and S-nitroso-glutathione, but not by aspirin. Thus, some carbon nanoparticles and microparticles have the ability to activate platelets and enhance vascular thrombosis. These observations are of importance for the pharmacological use of carbon nanoparticles and pathology of urban particulate matter.

Interdomain tilt angle determines integrin-dependent function of the ninth and tenth FIII domains of human fibronectin

Integrins are an important family of signaling receptors that mediate diverse cellular processes. The binding of the abundant extracellular matrix ligand fibronectin to integrins alpha(5)beta(1) and alpha(v)beta(3) is known to depend upon the Arg-Gly-Asp (RGD) motif on the tenth fibronectin FIII domain. The adjacent ninth FIII domain provides a synergistic effect on RGD-mediated integrin alpha(5)beta(1) binding and downstream function. The precise molecular basis of this synergy remains elusive. Here we have dissected further the function of FIII9 in integrin binding by analyzing the biological activity of the FIII9-10 interdomain interface variants and by determining their structural and dynamic properties in solution. We demonstrate that the contribution of FIII9 to both alpha(5)beta(1) and alpha(v)beta(3) binding and downstream function critically depends upon the interdomain tilt between the FIII9 and FIII10 domains. Our data suggest that modulation of integrin binding by FIII9 may arise in part from its steric properties that determine accessibility of the RGD motif. These findings have wider implications for mechanisms of integrin-ligand binding in the physiological context.

Integrins, cations and ligands: making the connection

Integrins are cell adhesion receptors that couple extracellular divalent cation-dependent recognition events with intracellular mechanical and biochemical responses and vice versa, thus affecting every function of nucleated cells. The structural basis of this bidirectional signaling and its dependency on cations has been the focus of intensive study over the past three decades. Significant progress made recently in elucidating the three-dimensional structure of the extracellular and cytoplasmic segments of integrins is giving valuable new insights into the tertiary and quaternary changes that underlie activation, ligand recognition and signaling by these receptors.

Force measurements of the alpha5beta1 integrin-fibronectin interaction

The interaction of the alpha(5)beta(1) integrin and its ligand, fibronectin (FN), plays a crucial role in the adhesion of cells to the extracellular matrix. An important intrinsic property of the alpha(5)beta(1)/FN interaction is the dynamic response of the complex to a pulling force. We have carried out atomic force microscopy measurements of the interaction between alpha(5)beta(1) and a fibronectin fragment derived from the seventh through tenth type III repeats of FN (i.e., FN7-10) containing both the arg-gly-asp (RGD) sequence and the synergy site. Direct force measurements obtained from an experimental system consisting of an alpha(5)beta(1) expressing K562 cell attached to the atomic force microscopy cantilever and FN7-10 adsorbed on a substrate were used to determine the dynamic response of the alpha(5)beta(1)/FN7-10 complex to a pulling force. The experiments were carried out over a three-orders-of-magnitude change in loading rate and under conditions that allowed for detection of individual alpha(5)beta(1)/FN7-10 interactions. The dynamic rupture force of the alpha(5)beta(1)/FN7-10 complex revealed two regimes of loading: a fast loading regime (>10,000 pN/s) and a slow loading regime (<10,000 pN/s) that characterize the inner and outer activation barriers of the complex, respectively. Activation by TS2/16 antibody increased both the frequency of adhesion and elevated the rupture force of the alpha(5)beta(1)/wild type FN7-10 complex to higher values in the slow loading regime. In experiments carried out with a FN7-10 RGD deleted mutant, the force measurements revealed that both inner and outer activation barriers were suppressed by the mutation. Mutations to the synergy site of FN, however, suppressed only the outer barrier activation of the complex. For both the RGD and synergy deletions, the frequency of adhesion was less than that of the wild type FN7-10, but was increased by integrin activation. The rupture force of these mutants was only slightly less than that of the wild type, and was not increased by activation. These results suggest that integrin activation involved a cooperative interaction with both the RGD and synergy sites.

Coming to grips with integrin binding to ligands

Integrins are alphabeta heterodimeric cell-surface receptors that are vital to the survival and function of nucleated cells. They recognize aspartic-acid- or a glutamic-acid-based sequence motifs in structurally diverse ligands. Integrin recognition of most ligands is divalent cation dependent and conformationally sensitive. In addition to this common property, there is an underlying binding specificity between integrins and ligands for which there has been no structural basis. The recently reported crystal structures of the extracellular segment of an integrin in its unliganded state and in complex with a prototypical Arg-Gly-Asp (RGD) ligand have provided an atomic basis for cation-mediated binding of aspartic-acid-based ligands to integrins. They also serve as a basis for modelling other integrins in complex with larger physiologic ligands. These models provide new insights into the molecular basis for ligand binding specificity in integrins and its regulation by activation-driven tertiary and quaternary changes.

In vitro selection of fibronectin gain-of-function mutations

Directed protein evolution, which employs a combination of random mutagenesis, phage display, and in vitro selection, was used to identify second-site suppressors of the fibronectin (Fn) cell binding domain mutation Asp1495Ala (RGA). The mutations in the Fn 9th (3fn9) and 10th (3fn10) type III repeats obtained after selection on purified integrins alphaIIbbeta3(D119Y) and alpha5beta1 are reported. The 3fn9-10(D1495A) phage with substitution mutations at Asp1418, which is located within the linker region between 3fn9 and 3fn10, enhanced binding to the integrins alphaIIbbeta3 and alpha5beta1, but not alphavbeta3. The substitution mutations identified at residue Asp1418 were introduced into the native recombinant 3fn9-10 sequence and found to augment binding to alphaIIbbeta3, demonstrating that the observed gain-of-function phenotype was independent of the multivalent character of the phage. These results support the following conclusions. First, regions of Fn in addition to the RGD loop are in close proximity to alphaIIbbeta3 and alpha5beta1 and are capable of participating in the binding to these integrins. Secondly, the conformational relationship between the 3fn9 and 3fn10 modules may be an important factor in the binding of Fn to these two integrins. Thirdly, other altered properties of Fn-integrin interactions, such as integrin specificity, may also be selected. This is the first description of Fn mutations that augment binding to integrins. The ability to select for particular phenotypes in vitro and the subsequent characterization of these mutations should further our understanding of the molecular details involved in the association of integrins and their ligands. Additionally, these higher-affinity 3fn9-10 ligands provide a starting point for further in vitro evolution and engineering of integrin-specific modules.

The lymphocyte metalloprotease MDC-L (ADAM 28) is a ligand for the integrin alpha4beta1

The interaction of lymphocytes with other cells is critical for normal immune surveillance and response. MDC-L (ADAM 28), a member of the ADAM (a disintegrin and metalloprotease) protein family, is expressed on the surface of human lymphocytes. ADAMs possess a disintegrin-like domain similar in sequence to small non-enzymatic snake venom peptides that act as integrin antagonists. We report here that the disintegrin domain of MDC-L is recognized by the leukocyte integrin alpha(4)beta(1). Recombinant Fc fusion proteins possessing the disintegrin domain of MDC-L supported adhesion of the T-lymphoma cell line, Jurkat, in a concentration- and divalent cation-dependent manner. Adhesion of Jurkat cells to the disintegrin domain of MDC-L was inhibited by an anti-MDC-L monoclonal antibody (mAb), Dis1-1. The epitope for mAb Dis1-1 was localized within 59 residues of the disintegrin domain. Recombinant expression of this 59-residue fragment of the disintegrin domain also supported cell adhesion. Adhesion of Jurkat cells to the MDC-L disintegrin domain was specifically inhibited by anti-alpha(4) and anti-beta(1) function-blocking mAbs. Furthermore, adhesion of various cell lines to MDC-L correlated with expression of the integrin alpha(4)-subunit. Transfected K562 cells expressing alpha(4)beta(1) adhered to the disintegrin domain in contrast to non-transfected K562 cells. We further investigated the binding of recombinant MDC-L disintegrin domain (rDis-Fc) in solution. The rDis-Fc was found to bind to Jurkat cells in solution in a concentration-dependent and saturable manner. Both adhesion and solution binding of rDis-Fc was inhibited by the alpha(4)beta(1) ligand mimetic CS-1 peptide. Additionally, recognition of the MDC-L disintegrin domain required "activation" of lymphocyte beta(1) integrins. The interaction of MDC-L with alpha(4)beta(1) may potentially regulate metalloprotease function by targeting or sequestering the active protease on the cell surface. These results suggest a potential role for the lymphocyte ADAM, MDC-L, in the interaction of lymphocytes with alpha(4)beta(1)-expressing leukocytes.