Secondary-structure characterization of two proficient kinase deoxyribozymes

Proximity-Dependent Activation of Split DNAzyme Kinase

Binary (also known as split) nucleic acid enzymes have emerged as novel tools in biosensors. We report a new split strategy to split the DNAzyme kinase into two independent and non-functional fragments, denoted Dk1sub and Dk1enz. In the presence of the specific target, their free ends are brought sufficiently close to interact with each other without the formation of Watson-Crick base pairings between Dk1sub and Dk1enz, thus allowing the DNA phosphorylation reaction. We term this approach proximity-dependent activation of split DNAzyme kinase (ProxSDK). The utility of ProxSDK is demonstrated by engineering a biosensing system that is capable of measuring specific DNA-protein interactions. We envision that the approach described herein will find useful applications in biosensing, imaging, and clinical diagnosis.

Rapid and Specific Imaging of Extracellular Signaling Molecule Adenosine Triphosphate with a Self-Phosphorylating DNAzyme

Adenosine 5'-triphosphate (ATP) is a central extracellular signaling agent involved in various physiological and pathological processes. However, precise measurements of the temporal and spatial components of ATP dynamics are lacking due primarily to the limitations of available methods for ATP detection. Here, we report on the first effort to design a self-phosphorylating DNAzyme (SPDz) sensor for fluorescence imaging of ATP. In response to ATP, SPDz sensors exhibit subsecond response kinetics, extremely high specificity, and micromolar affinities. In particular, we demonstrate cell-surface-anchored SPDz sensors for fluorescence imaging of both stress-induced endogenous ATP release in astrocytes and mechanical stimulation-evoked ATP release at the single-cell level. We also validated their utility for visualizing the rapid dynamic properties of ATP signaling upon electrical stimulation in astrocytes. Thus, SPDz sensors are robust tools for monitoring ATP signaling underlying diverse cellular processes.

A DNAzyme-based label-free fluorescent probe for guanosine-5'-triphosphate detection

Guanosine-5'-triphosphate (GTP) plays a key role in many important biological processes of cells. It is not only a primer for DNA replication and one of the four essential nucleoside triphosphates for mRNA synthesis, but also an energy source for translation and other important cellular processes. It can be converted to adenine nucleoside triphosphate (ATP), and the intracellular GTP level is closely related to the specific pathological state, so it is crucial to establish a simple and accurate method for the detection of GTP. Deoxyribozymes have unique catalytic and structural properties. One of the deoxyribozymes which is named DK2 with self-phosphorylation ability can transfer a phosphate from GTP to the 5' end in the presence of manganese(ii), while lambda exonuclease (λexo) catalyzes the gradual hydrolysis of double-stranded DNA molecules phosphorylated at the 5'-end from 5' to 3', but cannot cleave the 5'-OH end. The fluorescent dye SYBR Green I (SG I) can bind to dsDNA and produce significant fluorescence, but it can only give out weak fluorescence when it is mixed with a single strand. Here, we present a novel unlabeled fluorescence assay for GTP based on the self-phosphorylation of deoxyribozyme DK2 and the specific hydrolysis of λexo. Owing to the advantages of simple operation, high sensitivity, good specificity, low cost and without fluorophore (quenching group) labeling, this method has great potential in biological applications.

DNA Oligonucleotide 3'-Phosphorylation by a DNA Enzyme

T4 polynucleotide kinase is widely used for 5'-phosphorylation of DNA and RNA oligonucleotide termini, but no natural protein enzyme is capable of 3'-phosphorylation. Here, we report the in vitro selection of deoxyribozymes (DNA enzymes) capable of DNA oligonucleotide 3'-phosphorylation, using a 5'-triphosphorylated RNA transcript (pppRNA) as the phosphoryl donor. The basis of selection was the capture, during each selection round, of the 3'-phosphorylated DNA substrate terminus by 2-methylimidazole activation of the 3'-phosphate (forming 3'-MeImp) and subsequent splint ligation with a 5'-amino DNA oligonucleotide. Competing and precedented DNA-catalyzed reactions were DNA phosphodiester hydrolysis or deglycosylation, each also leading to a 3'-phosphate but at a different nucleotide position within the DNA substrate. One oligonucleotide 3'-kinase deoxyribozyme, obtained from an N40 random pool and named 3'Kin1, can 3'-phosphorylate nearly any DNA oligonucleotide substrate for which the 3'-terminus has the sequence motif 5'-NKR-3', where N denotes any oligonucleotide sequence, K = T or G, and R = A or G. These results establish the viabilty of in vitro selection for identifying DNA enzymes that 3'-phosphorylate DNA oligonucleotides.

DNA Catalysis: The Chemical Repertoire of DNAzymes

Deoxyribozymes or DNAzymes are single-stranded catalytic DNA molecules that are obtained by combinatorial in vitro selection methods. Initially conceived to function as gene silencing agents, the scope of DNAzymes has rapidly expanded into diverse fields, including biosensing, diagnostics, logic gate operations, and the development of novel synthetic and biological tools. In this review, an overview of all the different chemical reactions catalyzed by DNAzymes is given with an emphasis on RNA cleavage and the use of non-nucleosidic substrates. The use of modified nucleoside triphosphates (dN*TPs) to expand the chemical space to be explored in selection experiments and ultimately to generate DNAzymes with an expanded chemical repertoire is also highlighted.

An Efficient Catalytic DNA that Cleaves L-RNA

Many DNAzymes have been isolated from synthetic DNA pools to cleave natural RNA (D-RNA) substrates and some have been utilized for the design of aptazyme biosensors for bioanalytical applications. Even though these biosensors perform well in simple sample matrices, they do not function effectively in complex biological samples due to ubiquitous RNases that can efficiently cleave D-RNA substrates. To overcome this issue, we set out to develop DNAzymes that cleave L-RNA, the enantiomer of D-RNA, which is known to be completely resistant to RNases. Through in vitro selection we isolated three L-RNA-cleaving DNAzymes from a random-sequence DNA pool. The most active DNAzyme exhibits a catalytic rate constant ~3 min^-1 and has a structure that contains a kissing loop, a structural motif that has never been observed with D-RNA-cleaving DNAzymes. Furthermore we have used this DNAzyme and a well-known ATP-binding DNA aptamer to construct an aptazyme sensor and demonstrated that this biosensor can achieve ATP detection in biological samples that contain RNases. The current work lays the foundation for exploring RNA-cleaving DNAzymes for engineering biosensors that are compatible with complex biological samples.

Self-phosphorylating deoxyribozyme initiated cascade enzymatic amplification for guanosine-5'-triphosphate detection

The self-phosphorylating deoxyribozymes identified by in vitro selection can catalyze their own phosphorylation by utilizing phosphate donor guanosine-5'-triphosphate (GTP) which plays a critical role in a majority of cellular processes. On the basis of the unique properties of self-phosphorylating deoxyribozymes, we report a novel GTP sensor coupled with λ exonuclease cleavage reaction and nicking enzyme assisted fluorescence signal amplification process. The deoxyribozymes with special catalytic and structural characteristics display good stability compared to protein and RNA enzymes. We combined these properties with enzymatic recycling cleavage strategy to build a sensor which produced enhanced fluorescence signal. Sensitive and selective detection of GTP was successfully realized with the well-designed deoxyribozyme-based sensing platform by taking advantage of the self-phosphorylating ability of the kinase deoxyribozyme, efficient digestion capacity of λ exonuclease, and enzymatic recycling amplification of nicking enzyme. The method not only provides a platform for detecting GTP but also shows great potential in analyzing a variety of targets by combining deoxyribozymes with signal amplification strategy.

DNA catalysts with tyrosine kinase activity

We show that DNA catalysts (deoxyribozymes, DNA enzymes) can phosphorylate tyrosine residues of peptides. Using in vitro selection, we identified deoxyribozymes that transfer the γ-phosphoryl group from a 5'-triphosphorylated donor (a pppRNA oligonucleotide or GTP) to the tyrosine hydroxyl acceptor of a tethered hexapeptide. Tyrosine kinase deoxyribozymes that use pppRNA were identified from each of N30, N40, and N50 random-sequence pools. Each deoxyribozyme requires Zn(2+), and most additionally require Mn(2+). The deoxyribozymes have little or no selectivity for the amino acid identities near the tyrosine, but they are highly selective for phosphorylating tyrosine rather than serine. Analogous GTP-dependent DNA catalysts were identified and found to have apparent Km(GTP) as low as ∼20 μM. These findings establish that DNA has the fundamental catalytic ability to phosphorylate the tyrosine side chain of a peptide substrate.

Turning a kinase deoxyribozyme into a sensor

The vast majority of deoxyribozyme-based sensors are designed using modified RNA-cleaving deoxyribozymes and detect analytes that act as allosteric regulators of their catalytic activity. These sensors are susceptible to background signals due to catalytic activity in the absence of target or contaminant molecules that cleave the RNA substrate, mimicking the deoxyribozyme reaction. In this manuscript, we introduce a novel system that avoids these problems by using the analyte as the substrate for a deoxyribozyme catalyzed self-phosphorylation reaction. This reaction creates a modified deoxyribozyme product that can be circularized and subjected to massive signal amplification by rolling circle amplification, leading to a sensor system with high sensitivity and low background, which can be coupled to numerous reporter systems. As an example of the potential of this system, we used the self-phosphorylating deoxyribozyme Dk2 to detect as little as 25 nM GTP even in the presence of 1 mM ATP, a potential contaminant. To demonstrate the adaptive properties of this system, we appended another DNA sequence to Dk2, which, once amplified by RCA, codes for a fluorescence generating deoxyribozyme. This two-deoxyribozyme system was able to report the presence of GTP from 4 μM to 1 mM, with specificity over other NTP molecules. Using this model system, we were able to show that small molecule modifying deoxyribozymes can be converted to analyte sensors by coupling their catalytic activity to signal amplification and reporting.

Characterization of non-8-17 sequences uncovers structurally diverse RNA-cleaving deoxyribozymes

RNA-cleaving deoxyribozymes (DNAzymes) can be isolated from random-sequence DNA pools via the process of in vitro selection. However, small and simple catalytic motifs, such as the 8-17 DNAzyme, are commonly observed in sequence space, presenting a challenge in discovering large and complex DNAzymes. In an effort to investigate underrepresented molecular species derived from in vitro selection, in this study we sought to characterize non-8-17 sequences obtained from a previous in vitro selection experiment wherein the 8-17 deoxyribozyme was the dominant motif. We examined 9 sequence families from 21 motifs by characterizing their structural and functional features. We discovered 9 novel deoxyribozyme classes with large catalytic domains (>40 nucleotides) utilizing three-way or four-way junction structural frameworks. Kinetic studies revealed that these deoxyribozymes exhibit moderate to excellent catalytic rates (k(obs) from 0.003 to 1 min(-1)), compared to other known RNA-cleaving DNAzymes. Although chemical probing experiments, site-directed mutational analyses, and metal cofactor dependency tests suggest unique catalytic cores for each deoxyribozyme, common dinucleotide junction selectivity was observed between DNAzymes with similar secondary structural features. Together, our findings indicate that larger, structurally more complex, and diverse catalytic motifs are able to survive the process of in vitro selection despite a sequence space dominated by smaller and structurally simpler catalysts.

Assembly and activation of a kinase ribozyme

RNA activities can be regulated by modulating the relative energies of all conformations in a folding landscape; however, it is often unknown precisely how peripheral elements perturb the overall landscape in the absence of discrete alternative folds (inactive ensemble). This work explores the effects of sequence and secondary structure in governing kinase ribozyme activity. Kin.46 catalyzes thiophosphoryl transfer from ATPγS onto the 5' hydroxyl of polynucleotide substrates, and is regulated 10,000-fold by annealing an effector oligonucleotide to form activator helix P4. Transfer kinetics for an extensive series of ribozyme variants identified several dispensable internal single-stranded segments, in addition to a potential pseudoknot at the active site between segments J1/4 and J3/2 that is partially supported by compensatory rescue. Standard allosteric mechanisms were ruled out, such as formation of discrete repressive structures or docking P4 into the rest of the ribozyme via backbone 2' hydroxyls. Instead, P4 serves both to complete an important structural element (100-fold contribution to the reaction relative to a P4-deleted variant) and to mitigate nonspecific, inhibitory effects of the single-stranded tail (an additional 100-fold contribution to the apparent rate constant, k(obs)). Thermodynamic activation parameters ΔH(‡) and ΔS(‡), calculated from the temperature dependence of k(obs), varied with tail length and sequence. Inhibitory effects of the unpaired tail are largely enthalpic for short tails and are both enthalpic and entropic for longer tails. These results refine the structural view of this kinase ribozyme and highlight the importance of nonspecific ensemble effects in conformational regulation by peripheral elements.

The structural diversity of deoxyribozymes

When not constrained to long double-helical arrangements, DNA is capable of forming structural arrangements that enable specific sequences to perform functions such as binding and catalysis under defined conditions. Through a process called in vitro selection, numerous catalytic DNAs, known as deoxyribozymes or DNAzymes, have been isolated. Many of these molecules have the potential to act as therapeutic agents and diagnostic tools. As such, a better understanding of the structural arrangements present in these functional DNAs will aid further efforts in the development and optimization of these useful molecules. Structural characterization of several deoxyribozymes through mutagenesis, in vitro re-selection, chemical probing and circular dichroism has revealed many distinct and elaborate structural classes. Deoxyribozymes have been found to contain diverse structural elements including helical junctions, pseudoknots, triplexes, and guanine quadruplexes. Some of these studies have further shown the repeated isolation of similar structural motifs in independent selection experiments for the same type of chemical reaction, suggesting that some structural motifs are well suited for catalyzing a specific chemical reaction. To investigate the extent of structural diversity possible in deoxyribozymes, a group of kinase deoxyribozymes have been extensively characterized. Such studies have discovered some interesting structural features of these DNAzymes while revealing some novel DNA structures.

Improved deoxyribozymes for synthesis of covalently branched DNA and RNA

A covalently branched nucleic acid can be synthesized by joining the 2′-hydroxyl of the branch-site ribonucleotide of a DNA or RNA strand to the activated 5′-phosphorus of a separate DNA or RNA strand. We have previously used deoxyribozymes to synthesize several types of branched nucleic acids for experiments in biotechnology and biochemistry. Here, we report in vitro selection experiments to identify improved deoxyribozymes for synthesis of branched DNA and RNA. Each of the new deoxyribozymes requires Mn²⁺ as a cofactor, rather than Mg²⁺ as used by our previous branch-forming deoxyribozymes, and each has an initially random region of 40 rather than 22 or fewer combined nucleotides. The deoxyribozymes all function by forming a three-helix-junction (3HJ) complex with their two oligonucleotide substrates. For synthesis of branched DNA, the best new deoxyribozyme, 8LV13, has k_obs on the order of 0.1 min⁻¹, which is about two orders of magnitude faster than our previously identified 15HA9 deoxyribozyme. 8LV13 also functions at closer-to-neutral pH than does 15HA9 (pH 7.5 versus 9.0) and has useful tolerance for many DNA substrate sequences. For synthesis of branched RNA, two new deoxyribozymes, 8LX1 and 8LX6, were identified with broad sequence tolerances and substantial activity at pH 7.5, versus pH 9.0 for many of our previous deoxyribozymes that form branched RNA. These experiments provide new, and in key aspects improved, practical catalysts for preparation of synthetic branched DNA and RNA.

Convergent donor and acceptor substrate utilization among kinase ribozymes

Accommodation of donor and acceptor substrates is critical to the catalysis of (thio)phosphoryl group transfer, but there has been no systematic study of donor nucleotide recognition by kinase ribozymes, and there is relatively little known about the structural requirements for phosphorylating internal 2′OH. To address these questions, new self-phosphorylating ribozymes were selected that utilize ATP(gammaS) or GTP(gammaS) for 2′OH (thio)phosphorylation. Eight independent sequence families were identified among 57 sequenced isolates. Kinetics, donor nucleotide recognition and secondary structures were analyzed for representatives from each family. Each ribozyme was highly specific for its cognate donor. Competition assays with nucleotide analogs showed a remarkable convergence of donor recognition requirements, with critical contributions to recognition provided by the Watson–Crick face of the nucleobase, lesser contributions from donor nucleotide ribose hydroxyls, and little or no contribution from the Hoogsteen face. Importantly, most ribozymes showed evidence of significant interaction with one or more donor phosphates, suggesting that—unlike most aptamers—these ribozymes use phosphate interactions to orient the gamma phosphate within the active site for in-line displacement. All but one of the mapped (thio)phosphorylation sites are on unpaired guanosines within internal bulges. Comparative structural analysis identified three loosely-defined consensus structural motifs for kinase ribozyme active sites.

A complex RNA-cleaving DNAzyme that can efficiently cleave a pyrimidine-pyrimidine junction

Several RNA-cleaving deoxyribozymes (DNAzymes) have been reported for efficient cleavage of purine-containing junctions, but none is able to efficiently cleave pyrimidine-pyrimidine (Pyr-Pyr) junctions. We hypothesize that a stronger Pyr-Pyr cleavage activity requires larger DNAzymes with complex structures that are difficult to isolate directly from a DNA library; one possible way to obtain such DNAzymes is to optimize DNA sequences with weak activities. To test this, we carried out an in vitro selection study to derive DNAzymes capable of cleaving an rC-T junction in a chimeric DNA/RNA substrate from DNA libraries constructed through chemical mutagenesis of five previous DNAzymes with a k(obs) of approximately 0.001 min-1 for the rC-T junction. After several rounds of selective amplification, DNAzyme descendants with a k(obs) of approximately 0.1 min-1 were obtained from a DNAzyme pool. The most efficient motif, denoted "CT10-3.29," was found to have a catalytic core of approximately 50 nt, larger than other known RNA-cleaving DNAzymes, and its secondary structure contains five short duplexes confined by a four-way junction. Several variants of CT10-3.29 exhibit a k(obs) of 0.3-1.4 min-1 against the rC-T junction. CT10-3.29 also shows strong activity (k(obs)>0.1 min-1) for rU-A and rU-T junctions, medium activity (>0.01 min-1) for rC-A and rA-T junctions, and weak activity (>0.001 min-1) for rA-A, rG-T, and rG-A junctions. Interestingly, a single-point mutation within the catalytic core of CT10-3.29 altered the pattern of junction specificity with a significantly decreased ability to cleave rC-T and rC-A junctions and a substantially increased ability to cleave rA-A, rA-T, rG-A, rG-T, rU-A, and rU-T junctions. This observation illustrates the intricacy and plasticity of this RNA-cleaving DNAzyme in dinucleotide junction selectivity. The current study shows that it is feasible to derive efficient DNAzymes for a difficult chemical task and reveals that DNAzymes require more complex structural solutions for such a task.

Catalytic DNAzymes: derivations and functions

BACKGROUND

Although catalytic RNA enzymes (CRzs) are naturally occurring in many organisms, their DNA counterparts (CDzs) were developed by in vitro selection/evolution from random sequence libraries.

OBJECTIVE

To provide a brief overview of how CDzs have been selected in vitro, and of their properties and functions, as well as their possible future utility.

METHODS

We concentrated on examples of 'direct' selection of CDzs. Many CDzs have been used in biological settings, for example downregulation of target mRNAs, while many more recent applications use CDzs in biosensor and nanotechnology settings.

CONCLUSIONS

Although much work has concentrated on using CDzs for regulating gene expression, their potential as nucleic acid medicines has diminished substantially, supplanted by simple antisense oligonucleotides and, more recently, by small interfering RNAs (siRNAs). It seems unlikely that CDzs will have clinical utility. In contrast, they are likely to have significant potential in the sensor/nanotechnology arena.

Recent advances in DNA catalysis

Studies of catalytically active DNA sequences have expanded considerably since the first artificial deoxyribozyme was identified in 1994. Nevertheless, the field is still quite young, and advances in both fundamental understanding and practical applications of deoxyribozymes are still developing. Deoxyribozymes that either cleave or ligate two RNA substrates have been most widely investigated, and this review describes recent advances in the fundamental studies and applications of these DNA enzymes. Deoxyribozymes with catalytic activities other than RNA ligation and cleavage are also increasingly pursued, and this review covers several key examples.

A deoxyribozyme with a novel guanine quartet-helix pseudoknot structure

Here we report a deoxyribozyme with a unique structure that contains a two-tiered guanine quadruplex interlinked to a Watson-Crick duplex. Through in vitro selection, sequence mutation, and methylation interference, we show the presence of both the two-tiered guanine-quadruplex and two helical regions contained in the active structure of this self-phosphorylating deoxyribozyme. Interestingly, one GG element of the quadruplex is part of a hairpin loop within one of the identified helical regions. Circular dichroism analysis showed that antiparallel quadruplex formation was dependent on this helix. To our knowledge, this is the first report of a pseudoknot nucleic acid structure that involves a guanine quadruplex. Our findings indicate that guanine quadruplexes can be part of complex structural arrangements, increasing the likelihood of finding more complex guanine quadruplex arrangements in biological systems.

Characterization of pH3DZ1 — An RNA-cleaving deoxyribozyme with optimal activity at pH 3

We previously described a cis-acting RNA-cleaving deoxyribozyme known as pH3DZ1 that exhibits optimal catalytic activity at pH 3.0 (Zhongjie Liu, Shirley H. Mei, John D. Brennan, and Yingfu Li. J. Am. Chem. Soc. 125, 7539 (2003)). This DNA catalyst was made of a 99-nucleotide (nt) catalytic domain covalently linked to a 23-nt DNA–RNA chimeric substrate containing a single ribonucleotide as the cleavage site. In the present work, we conducted an extensive sequence examination of this deoxyribozyme via nucleotide truncation and reselection experiments, with a goal to minimize its size and identify the nucleotides that are crucial to its catalytic function. A trans-acting deoxyribozyme that can process an external substrate was also successfully designed. Stretches of 30 and 17 nucleotides from the 5′ and 3′ ends of the trans catalyst, respectively, were found to be completely dispensable; in contrast, few nucleotides could be deleted internally without producing a detrimental effect. The reselection experiment led to the discovery of 7 and 5 absolutely conserved nucleotides located at the 5′ and 3′ ends of the minimized catalyst, respectively, separated by a 31-nt element in which 14 highly conserved nucleotides were scattered among 17 variable nucleotides. The shortened deoxyribozyme and the original catalyst showed a similar pH profile with the optimal activity at pH 3; however, the minimized deoxyribozyme still exhibited strong catalytic activity at pH 2.5, while the full-length catalyst was barely active at this pH. Finally, it was found that this deoxyribozyme generated two cleavage fragments, one with 2′,3′-cyclic phosphate and the other with 5′-OH.Key words: DNA, deoxyribozyme, RNA cleavage, in vitro selection, catalysis.

Entrapment of Fluorescence Signaling DNA Enzymes in Sol−Gel-Derived Materials for Metal Ion Sensing

Three fluorescence signaling DNA enzymes (deoxyribozymes or DNAzymes) were successfully immobilized within a series of sol-gel-derived matrixes and used for sensing of various metal ions. The DNAzymes are designed such that binding of appropriate metal ions induces the formation of a catalytic site that cleaves a ribonucleotide linkage within a DNA substrate. A fluorophore (fluorescein) and a quencher (DABCYL, [4-(4-dimethylaminophenylazo)benzoic acid]) were placed on the two deoxythymidines flanking the ribonucleotide to allow the generation of fluorescence upon the catalytic cleavage at the RNA linkage. In general, all DNAzymes retained at least partial catalytic function when entrapped in either hydrophilic or hydrophobic silica-based materials, but displayed slower response times and lower overall signal changes relative to solution. Interestingly, it was determined that maximum sensitivity toward metal ions was obtained when DNAzymes were entrapped into composite materials containing approximately 40% of methyltrimethoxysilane (MTMS) and approximately 60% tetramethoxysilane (TMOS). Highly polar materials derived from sodium silicate, diglycerylsilane, or TMOS had relatively low signal enhancements, while materials with very high levels of MTMS showed significant leaching and low signal enhancements. Entrapment into the hybrid silica material also reduced signal interferences that were related to metal-induced quenching; such interferences were a significant problem for solution-based assays and for polar materials. Extension of the solid-phase DNAzyme assay toward a multiplexed assay format for metal detection is demonstrated, and shows that sol-gel technology can provide new opportunities for the development of DNAzyme-based biosensors.

Characterization of long RNA-cleaving deoxyribozymes with short catalytic cores: the effect of excess sequence elements on the outcome of in vitro selection

We previously conducted an in vitro selection experiment for RNA-cleaving deoxyribozymes, using a combinatorial DNA library containing 80 random nucleotides. Ultimately, 110 different sequence classes were isolated, but the vast majority contained a short14-15 nt catalytic DNA motif commonly known as 8-17. Herein, we report extensive truncation experiments conducted on multiple sequence classes to confirm the suspected catalytic role played by 8-17 and to determine the effect of excess sequence elements on the activity of this motif and the outcome of selection. Although we observed beneficial, detrimental and neutral consequences for activity, the magnitude of the effect rarely exceeded 2-fold. These deoxyribozymes appear to have survived increasing selection pressure despite the presence of additional sequence elements, rather than because of them. A new deoxyribozyme with comparable activity, called G15-30, was approximately 2.5-fold larger and experienced a approximately 4-fold greater inhibitory effect from excess sequence elements than the average 8-17 motif. Our results suggest that 8-17 may be less susceptible to the potential inhibitory effects of excess arbitrary sequence than larger motifs, which represents a previously unappreciated selective advantage that may contribute to its widespread recurrence.

Quenching of fluorophore-labeled DNA oligonucleotides by divalent metal ions: implications for selection, design, and applications of signaling aptamers and signaling deoxyribozymes

Recent years have seen a dramatic increase in the use of fluorescence-signaling DNA aptamers and deoxyribozymes as novel biosensing moieties. Many of these functional single-stranded DNA molecules are either engineered to function in the presence of divalent metal ion cofactors or designed as sensors for specific divalent metal ions. However, many divalent metal ions are potent fluorescence quenchers. In this study, we first set out to examine the factors that contribute to quenching of DNA-bound fluorophores by commonly used divalent metal ions, with the goal of establishing general principles that can guide future exploitation of fluorescence-signaling DNA aptamers and deoxyribozymes as biosensing probes. We then extended these studies to examine the effect of specific metals on the signaling performance of both a structure-switching signaling DNA aptamer and an RNA-cleaving and fluorescence-signaling deoxyribozyme. These studies showed extensive quenching was obtained when using divalent transition metal ions owing to direct DNA-metal ion interactions, leading to combined static and dynamic quenching. The extent of quenching was dependent on the type of metal ion and the concentration of supporting monovalent cations in the buffer, with quenching increasing with the number of unpaired electrons in the metal ion and decreasing with the concentration of monovalent ions. The extent of quenching was independent of the fluorophore, indicating that quenching cannot be alleviated simply by changing the nature of the fluorescent probe. Our results also show that the DNA sequence and the local secondary structure in the region of the fluorescent tag can dramatically influence the degree of quenching by divalent transition metal ions. In particular, the extent of quenching is predominantly determined by the fluorophore location with respect to guanine-rich and duplex regions within the strand sequence. Examination of the effect of both the type and concentration of metal ions on the performance of a fluorescence-signaling aptamer and a signaling deoxyribozyme confirms that judicious choice of divalent transition metal ions is important in maximizing signals obtained from such systems.

Revitalization of Six Abandoned Catalytic DNA Species Reveals a Common Three-way Junction Framework and Diverse Catalytic Cores

A library containing as many as 10(16) nucleic acid candidates is typically used to isolate artificial ribozymes and deoxyribozymes (DNAzymes) in an in vitro selection experiment, with only a handful of sequences surviving many rounds of stringent selection steps. These winning species are generally the focus of interest whereas the less competitive contenders are usually not examined. Nevertheless, molecular species abandoned during the selection process might still represent a rich pool of catalytic motifs that are useful for the examination of DNA's inherent catalytic ability, and for the design of molecular tools for practical applications. Here we report a study of six RNA-cleaving, fluorescence-signaling deoxyribozymes that appeared in the early generations of a previous in vitro selection experiment, using the combined approaches of reselection, rational structural analysis, and reaction condition optimization. All six deoxyribozymes were found to use a three-way junction as a common structural framework for catalysis. However, disparities observed in the conserved nucleotide allocations, methylation interference patterns and metal-ion selectivities, pointed to distinct catalytic cores. The rate constants of the optimized deoxyribozymes fell in the range of approximately 0.2 to 1.6 min(-1), which are comparable to those of similar ribozymes. Our findings indicate that deoxyribozymes eliminated by harsh selection criteria are structurally simple molecules that can be tailored into efficient catalysts.

Characterization of a catalytically efficient acidic RNA-cleaving deoxyribozyme

We previously demonstrated—through the isolation of RNA-cleaving deoxyribozymes by in vitro selection that are catalytically active in highly acidic solutions—that DNA, despite its chemical simplicity, could perform catalysis under challenging chemical conditions [Liu,Z., Mei,S.H., Brennan,J.D. and Li,Y. (2003) J. Am. Chem. Soc. 125, 7539–7545]. One remarkable DNA molecule therefrom is pH4DZ1, a self-cleaving deoxyribozyme that exhibits a k_obs of ∼1 min⁻¹ at pH 3.8. In this study, we carried out a series of experiments to examine the sequence and catalytic properties of this acidic deoxyribozyme. Extensive nucleotide truncation experiments indicated that pH4DZ1 was a considerably large deoxyribozyme, requiring ∼80 out of the original 123 nt for the optimal catalytic activity. A reselection experiment identified ten absolutely conserved nucleotides that are distributed in three catalytically crucial sequence elements. In addition, a trans deoxyribozyme was successfully designed. Comparison of the observed rate constant of pH4DZ1 with experimentally determined rate constant for the uncatalyzed reaction revealed that pH4DZ1 achieved a rate enhancement of ∼10⁶-fold. This study provides valuable information about this low-pH-functional deoxyribozyme and paves way for further structural and mechanistic characterization of this unique catalytic DNA.