Three-dimensional structure in lipid micelles of the pediocin-like antimicrobial peptide curvacin A

Understanding bacteriocin heterologous expression: A review

Bacteriocins are a diverse group of ribosomally synthesised antimicrobial peptides/proteins that play an important role in self-defence. They are widely used as bio-preservatives and effective substitutes for disease eradication. They can be used in conjunction with or as an alternative to antibiotics to minimize the risk of resistance development. There are remarkably few reports indicating resistance to bacteriocins. Although there are many research reports that emphasise heterologous expression of bacteriocin, there are no convincing reports on the significant role that intrinsic and extrinsic factors play in overexpression. A coordinated and cooperative expression system works in concert with multiple genetic elements encoding native proteins, immunoproteins, exporters, transporters and enzymes involved in the post-translational modification of bacteriocins. The simplest way could be to utilise the existing E. coli expression system, which is conventional, widely used for heterologous expression and has been further extended for bacteriocin expression. In this article, we will review the intrinsic and extrinsic factors, advantages, disadvantages and major problems associated with bacteriocin overexpression in E. coli. Finally, we recommend the most effective strategies as well as numerous bacteriocin expression systems from E. coli, Lactococcus, Kluveromyces lactis, Saccharomyces cerevisiae and Pichia pastoris for their suitability for successful overexpression.

Structural Features, Mechanisms of Action, and Prospects for Practical Application of Class II Bacteriocins

Bacteriocins are antimicrobial peptides ribosomally synthesized by both Gram-negative and Gram-positive bacteria, as well as by archaea. Bacteriocins are usually active against phylogenetically related bacteria, providing competitive advantage to their producers in the natural bacterial environment. However, some bacteriocins are known to have a broader spectrum of antibacterial activity, including activity against multidrug-resistant bacterial strains. Multitude of bacteriocins studied to date are characterized by a wide variety of chemical structures and mechanisms of action. Existing classification systems for bacteriocins take into account structural features and biosynthetic pathways of bacteriocins, as well as the phylogenetic affiliation of their producing organisms. Heat-stable bacteriocins with molecular weight of less than 10 kDa from Gram-positive and Gram-negative producers are divided into post-translationally modified (class I) and unmodified peptides (class II). In recent years there has been an increasing interest in the class II bacteriocins as potential therapeutic agents that can help to combat antibiotic-resistant infections. Advantages of unmodified peptides are relative simplicity of their biotechnological production in heterologous systems and chemical synthesis. Potential for the combined use of bacteriocins with other antimicrobial agents allowing to enhance their efficacy, low probability of cross-resistance development, and ability of probiotic strains to produce bacteriocins in situ make them promising candidate compounds for creation of new drugs. The review focuses on structural diversity of the class II bacteriocins and their practical relevance.

Application of Liposome Encapsulating Lactobacillus curvatus Extract in Cosmetic Emulsion Lotion

Probiotic extracts have various positive attributes, such as antioxidant, tyrosinase inhibitory, and antimicrobial activity. Lactobacillus curvatus produces bacteriocin, which activates the lipid membrane structure and has potential as a natural preservative for cosmetic emulsions. In this study, L. curvatus extract was encapsulated in liposomes and formulated as an oil-in-water (O/W) emulsion. Radical scavenging activity, tyrosinase inhibition, and challenge tests were conducted to confirm the liposome activity and the activity of the applied lotion emulsion. The liposome-encapsulated extract had a relatively high absolute ζ-potential (52.53 > 35.43), indicating its stability, and 96% permeability, which indicates its potential as an active agent in lotion emulsions. Characterization of emulsions containing the liposomes also indicated a stable state. The liposome-encapsulated extract exhibited a higher radical scavenging activity than samples without the extract and non-encapsulated samples, and the functionality was preserved in the lotion emulsion. The tyrosinase inhibition activity of the lotion emulsion with the liposome-encapsulated extract was similar to that of the non-treated extract. Candida albicans and Aspergillus niger were also inhibited in the challenge test with the lotion emulsions during storage. Collectively, these findings indicate that the liposome-encapsulated extract and the lotion containing the encapsulated extract have potential applicability as natural preservatives.

Heterologous Expression of the Class IIa Bacteriocins, Plantaricin 423 and Mundticin ST4SA, in Escherichia coli Using Green Fluorescent Protein as a Fusion Partner

The antilisterial class IIa bacteriocins, plantaricin 423 and mundticin ST4SA, have previously been purified from the cell-free supernatants of Lactobacillus plantarum 423 and Enterococcus mundtii ST4SA, respectively. Here, we present the fusions of mature plantaricin 423 and mundticin ST4SA to His-tagged green fluorescent protein (GFP) for respective heterologous expression in Escherichia coli. Fusion of plantaricin 423 and mundticin ST4SA to His-tagged GFP produced the fusion proteins GFP-PlaX and GFP-MunX, respectively. Both fusion proteins were autofluorescent, circumvented inclusion body formation and lowered the toxicity of class IIa bacteriocins during heterologous expression. Not only did GFP-class IIa fusion stabilize heterologous expression and boost yields, the fluorescent intensity of GFP-PlaX and GFP-MunX could be monitored quantitatively and qualitatively throughout expression and purification. This robust fluorometric property allowed rapid optimization of conditions for expression and bacteriocin liberation from GFP via the incorporated WELQut protease cleavage sequence. Incubation temperature and IPTG concentration had a significant effect on bacteriocin yield, and was optimal at 18°C and 0.1-0.2 mM, respectively. GFP-MunX was approximately produced at a yield of 153.30 mg/L culture which resulted in 12.4 mg/L active mundticin ST4SA after liberation and HPLC purification. While GFP-PlaX was produced at a yield of 121.29 mg/L culture, evidence suggests heterologous expression resulted in conformation isomers of WELQut liberated plantaricin 423.

The case for class II bacteriocins: A biophysical approach using "suicide probes" in receptor-free hosts to study their mechanism of action

Class II bacteriocins are unmodified membrane-active peptides that act over a narrow spectrum of target bacteria. They bind a specific receptor protein on the membrane to form a pore, leading to membrane permeabilization and cell death. However, little is known about the molecular events triggering the pore formation after the bacteriocin recognizes the receptor. It is not clear yet if the pore is the same receptor forced into an open conformation or if the pore results from the bacteriocin insertion and oligomeric assembly in the lipid bilayer. In order to reveal which model is more suitable to explain the toxicity mechanism, in this work we use chimeric peptides, resulting from the fusion of the bitopic membrane protein EtpM with different class II bacteriocins: enterocin CRL35, pediocin PA-1 and microcin V. E. coli strains lacking the specific receptors for these bacteriocins were chosen as expression hosts. As these constructs display a lethal effect when they are heterologously expressed, they are called "suicide probes". The results suggest that, indeed, the specific receptor would act as a docking molecule more than as a structural piece of the pore, as long as the bacteriocin is somehow anchored to the membrane. These set of chimeric peptides also represent an in vivo system that allows to study the interaction of the bacteriocins with real bacterial membranes, instead of model membranes. Hence, the effects of these suicide probes in membrane fluidity and transmembrane potential were also assessed, using fluorescence spectroscopy. The data show that the different suicide probes are able to increase phospholipid order and depolarize the membranes of receptor-free bacterial cells.

Pediocin-Like Antimicrobial Peptides of Bacteria

Bacteriocins are bacterial antimicrobial peptides that, unlike classical peptide antibiotics, are products of ribosomal synthesis and usually have a narrow spectrum of antibacterial activity against species closely related to the producers. Pediocin-like bacteriocins (PLBs) belong to the class IIa of the bacteriocins of Gram-positive bacteria. PLBs possess high activity against pathogenic bacteria from Listeria and Enterococcus genera. Molecular target for PLBs is a membrane protein complex - bacterial mannose-phosphotransferase. PLBs can be synthesized by components of symbiotic microflora and participate in the maintenance of homeostasis in various compartments of the digestive tract and on the surface of epithelial tissues contacting the external environment. PLBs could give a rise to a new group of antibiotics of narrow spectrum of activity.

The expanding structural variety among bacteriocins from Gram-positive bacteria

Bacteria use various strategies to compete in an ecological niche, including the production of bacteriocins. Bacteriocins are ribosomally synthesized antibacterial peptides, and it has been postulated that the majority of Gram-positive bacteria produce one or more of these natural products. Bacteriocins can be used in food preservation and are also considered as potential alternatives to antibiotics. The majority of bacteriocins from Gram-positive bacteria had been traditionally divided into two major classes, namely lantibiotics, which are post-translationally modified bacteriocins, and unmodified bacteriocins. The last decade has seen an expanding number of ribosomally synthesized and post-translationally modified peptides (RiPPs) in Gram-positive bacteria that have antibacterial activity. These include linear azol(in)e-containing peptides, thiopeptides, bottromycins, glycocins, lasso peptides and lipolanthines. In addition, the three-dimensional (3D) structures of a number of modified and unmodified bacteriocins have been elucidated in recent years. This review gives an overview on the structural variety of bacteriocins from Gram-positive bacteria. It will focus on the chemical and 3D structures of these peptides, and their interactions with receptors and membranes, structure-function relationships and possible modes of action.

Novel Antimicrobial Peptides from the Arctic Polychaeta Nicomache minor Provide New Molecular Insight into Biological Role of the BRICHOS Domain

Endogenous antimicrobial peptides (AMPs) are among the earliest molecular factors in the evolution of animal innate immunity. In this study, novel AMPs named nicomicins were identified in the small marine polychaeta Nicomache minor in the Maldanidae family. Full-length mRNA sequences encoded 239-residue prepropeptides consisting of a putative signal sequence region, the BRICHOS domain within an acidic proregion, and 33-residue mature cationic peptides. Nicomicin-1 was expressed in the bacterial system, and its spatial structure was analyzed by circular dichroism and nuclear magnetic resonance spectroscopy. Nicomicins are unique among polychaeta AMPs scaffolds, combining an amphipathic N-terminal α-helix and C-terminal extended part with a six-residue loop stabilized by a disulfide bridge. This structural arrangement resembles the Rana-box motif observed in the α-helical host-defense peptides isolated from frog skin. Nicomicin-1 exhibited strong in vitro antimicrobial activity against Gram-positive bacteria at submicromolar concentrations. The main mechanism of nicomicin-1 action is based on membrane damage but not on the inhibition of bacterial translation. The peptide possessed cytotoxicity against cancer and normal adherent cells as well as toward human erythrocytes.

In Silico Structural Evaluation of Short Cationic Antimicrobial Peptides

Cationic peptides with antimicrobial properties are ubiquitous in nature and have been studied for many years in an attempt to design novel antibiotics. However, very few molecules are used in the clinic so far, sometimes due to their complexity but, mostly, as a consequence of the unfavorable pharmacokinetic profile associated with peptides. The aim of this work is to investigate cationic peptides in order to identify common structural features which could be useful for the design of small peptides or peptido-mimetics with improved drug-like properties and activity against Gram negative bacteria. Two sets of cationic peptides (AMPs) with known antimicrobial activity have been investigated. The first reference set comprised molecules with experimentally-known conformations available in the protein databank (PDB), and the second one was composed of short peptides active against Gram negative bacteria but with no significant structural information available. The predicted structures of the peptides from the first set were in excellent agreement with those experimentally-observed, which allowed analysis of the structural features of the second group using computationally-derived conformations. The peptide conformations, either experimentally available or predicted, were clustered in an “all vs. all” fashion and the most populated clusters were then analyzed. It was confirmed that these peptides tend to assume an amphipathic conformation regardless of the environment. It was also observed that positively-charged amino acid residues can often be found next to aromatic residues. Finally, a protocol was evaluated for the investigation of the behavior of short cationic peptides in the presence of a membrane-like environment such as dodecylphosphocholine (DPC) micelles. The results presented herein introduce a promising approach to inform the design of novel short peptides with a potential antimicrobial activity.

Synthesis, antimicrobial activity and conformational analysis of the class IIa bacteriocin pediocin PA-1 and analogs thereof

The antimicrobial peptide pediocin PA-1 is a class IIa bacteriocin that inhibits several clinically relevant pathogens including Listeria spp. Here we report the synthesis and characterization of whole pediocin PA-1 and novel analogs thereof using a combination of solid- and solution-phase strategies to overcome difficulties due to instability and undesired reactions. Pediocin PA-1 thus synthesized was a potent inhibitor of Listeria monocytogenes (MIC = 6.8 nM), similar to the bacteriocin produced naturally by Pediococcus acidilactici. Of particular interest is that linear analogs lacking both of the disulfide bridges characterizing pediocin PA-1 were as potent. One linear analog was also a strong inhibitor of Clostridium perfringens, another important food-borne pathogen. These results are discussed in light of conformational information derived from circular dichroism, solution NMR spectroscopy and structure-activity relationship studies.

Pediocin-like bacteriocins: new perspectives on mechanism of action and immunity

This review attempts to analyze the mechanism of action and immunity of class IIa bacteriocins. These peptides are promising alternative food preservatives and they have a great potential application in medical sciences. Class IIa bacteriocins act on the cytoplasmic membrane of Gram-positive cells dissipating the transmembrane electrical potential by forming pores. However, their toxicity and immunity mechanism remains elusive. Here we discuss the role of the mannose phosphotransferase system (man-PTS) as the receptor for class IIa bacteriocins and the influence of the membrane composition on the activity of these antimicrobial peptides. A model that is consistent with experimental results obtained by different researchers involves the non-specific binding of the bacteriocin to the negatively charged membrane of target bacteria. This step would facilitate a specific binding to the receptor protein, altering its functionality and forming an independent pore in which the bacteriocin is inserted in the membrane. An immunity protein could specifically recognize and block the pore. Bacteriocins function in bacterial ecosystems and energetic costs associated with their production are also discussed. Theoretical models based on solid experimental evidence are vital to understand bacteriocins mechanism of action and to promote new technological developments.

Solution Structure of Enterocin HF, an Antilisterial Bacteriocin Produced by Enterococcus faecium M3K31

The solution structure of enterocin HF (EntHF), a class IIa bacteriocin of 43 amino acids produced by Enterococcus faecium M3K31, was evaluated by CD and NMR spectroscopy. Purified EntHF was unstructured in water, but CD analysis supports that EntHF adopts an α-helical conformation when exposed to increasing concentrations of trifluoroethanol. Furthermore, NMR spectroscopy indicates that this bacteriocin adopts an antiparallel β-sheet structure in the N-terminal region (residues 1-17), followed by a well-defined central α-helix (residues 19-30) and a more disordered C-terminal end (residues 31-43). EntHF could be structurally organized into three flexible regions that might act in a coordinated manner. This is in agreement with the absence of long-range nuclear Overhauser effect signals between the β-sheet domain and the C-terminal end of the bacteriocin. The 3D structure recorded for EntHF fits emerging facts regarding target recognition and mode of action of class IIa bacteriocins.

The Pediocin PA-1 Accessory Protein Ensures Correct Disulfide Bond Formation in the Antimicrobial Peptide Pediocin PA-1

Peptides, in contrast to proteins, are generally not large enough to form stable and well-defined three-dimensional structures. However, peptides are still able to form correct disulfide bonds. Using pediocin-like bacteriocins, we have examined how this may be achieved. Some pediocin-like bacteriocins, such as pediocin PA-1 and sakacin P[N24C+44C], have four cysteines. There are three possible ways by which the four cysteines may combine to form two disulfide bonds, and the three variants are expected to be produced in approximately equal amounts if their formation is random. Pediocin PA-1 and sakacin P[N24C+44C] with correct disulfide bonds were the main products when they were secreted by the pediocin PA-1 ABC transporter and accessory protein, but when they were secreted by the corresponding secretion machinery for sakacin A, a pediocin-like bacteriocin with one disulfide bond (two cysteines), peptides with all three possible disulfide bonds were produced in approximately equal amounts. All five cysteines in the pediocin PA-1 ABC transporter and the two cysteines (that form a CxxC motif) in the accessory protein were individually replaced with serines to examine their involvement in disulfide bond formation in pediocin PA-1. The Cys86Ser mutation in the accessory protein caused a 2-fold decrease in the amount of pediocin PA-1 with correct disulfide bonds, while the Cys83Ser mutation nearly abolished the production of pediocin PA-1 and resulted in the production of all three disufide bond variants in equal amounts. The Cys19Ser mutation in the ABC transporter completely abolished secretion of pediocin PA-1, suggesting that Cys19 is in the proteolytic active site and involved in cleaving the prebacteriocin. Replacing the other four cysteines in the ABC transporter with serines caused a slight reduction in the overall amount of secreted pediocin PA-1, but the relative amount with the correct disulfide bonds remained large. These results indicate that the pediocin PA-1 accessory protein has a chaperone-like activity in that it ensures the formation of the correct disulfide bond in pediocin PA-1.

Mutational analysis of positively charged residues in the N-terminal region of the class IIa bacteriocin pediocin PA-1

The significance of positively charged residues for the target cell binding of pediocin PA-1 bacteriocins was studied by site-directed mutagenesis. Most of the charged residues are located in the N-terminal half of the peptide, which is thought to mediate the initial binding of these bacteriocins to their target cells through electrostatic interactions. Mutated peptides in which the positively charged residues were substituted or increased in number were constructed, and some of these peptides exhibited a twofold increase in the bacteriostatic activity. The greatest enhancement was achieved by introduced the positive charges at position 13, their results show the benefits of introducing an additional cationic residue within this patch in the middle of the N-terminal half of pediocin PA-1 bacteriocins. Thus, the presence of additional cationic residues in the N-terminal half influenced the electrostatic binding of this bacteriocin to its target cells and increased the potency of the peptide on the potency of Micrococcus luteus and Staphylococcus aureus.

SIGNIFICANCE AND IMPACT OF THE STUDY

No previous work has systematically examined the N-terminal cationic residues of the pediocin PA-1 for their functional importance or redundancy. In this study, we examined the structure-function relationships of pediocin PA-1 by site-directed mutagenesis. Mutated peptides in which the positively charged residues were substituted and increased in number exhibited a twofold increase in the bacteriostatic activity. This study demonstrated the importance of the cationic patch in the N-terminal half of pediocin PA-1. The cationic residues influenced the electrostatic binding of the bacteriocin to the target cells and had a greater effect on the potency of the peptide towards Micrococcus luteus and Staphylococcus aureus.

Class IIa bacteriocins: diversity and new developments

Class IIa bacteriocins are heat-stable, unmodified peptides with a conserved amino acids sequence YGNGV on their N-terminal domains, and have received much attention due to their generally recognized as safe (GRAS) status, their high biological activity, and their excellent heat stability. They are promising and attractive agents that could function as biopreservatives in the food industry. This review summarizes the new developments in the area of class IIa bacteriocins and aims to provide uptodate information that can be used in designing future research.

Target recognition, resistance, immunity and genome mining of class II bacteriocins from Gram-positive bacteria

Due to their very potent antimicrobial activity against diverse food-spoiling bacteria and pathogens and their favourable biochemical properties, peptide bacteriocins from Gram-positive bacteria have long been considered promising for applications in food preservation or medical treatment. To take advantage of bacteriocins in different applications, it is crucial to have detailed knowledge on the molecular mechanisms by which these peptides recognize and kill target cells, how producer cells protect themselves from their own bacteriocin (self-immunity) and how target cells may develop resistance. In this review we discuss some important recent progress in these areas for the non-lantibiotic (class II) bacteriocins. We also discuss some examples of how the current wealth of genome sequences provides an invaluable source in the search for novel class II bacteriocins.

Development of Class IIa Bacteriocins as Therapeutic Agents

Class IIa bacteriocins have been primarily explored as natural food preservatives, but there is much interest in exploring the application of these peptides as therapeutic antimicrobial agents. Bacteriocins of this class possess antimicrobial activity against several important human pathogens. Therefore, the therapeutic development of these bacteriocins will be reviewed. Biological and chemical modifications to both stabilize and increase the potency of bacteriocins are discussed, as well as the optimization of their production and purification. The suitability of bacteriocins as pharmaceuticals is explored through determinations of cytotoxicity, effects on the natural microbiota, and in vivo efficacy in mouse models. Recent results suggest that class IIa bacteriocins show promise as a class of therapeutic agents.

Mutational analysis of residues in the helical region of the class IIa bacteriocin pediocin PA-1

A 15-mer fragment that is derived from the helical region in the C-terminal half of pediocin PA-1 inhibited the activity of pediocin PA-1. Of 13 other pediocin-like (hybrid) bacteriocins, only the hybrid bacteriocin Sak/Ped was markedly inhibited by the 15-mer fragment. Sak/Ped was the only one of these bacteriocins that had a sequence (in the C-terminal helix-containing half) identical to that of the 15-mer fragment, indicating that the fragment inhibits pediocin-like bacteriocins in a sequence-dependent manner. By replacing (one at a time) all 15 residues in the fragment with Ala or Leu, five residues (K1, A2, T4, N8, and A15) were identified as being especially important for the inhibitory action of the fragment. The results suggest that the corresponding residues (K20, A21, T23, N27, and A34, respectively) in pediocin PA-1 might be involved in interactions between pediocin PA-1 and its receptor. To characterize the environment surrounding these five residues when pediocin PA-1 interacts with target cells, these residues were replaced (one at a time) with a hydrophobic large (Leu) residue, a hydrophilic charged (Asp or Arg) residue, and a small (Ala or Gly) residue. The results revealed that residues A21 and A34 are in a spatially constrained environment, since the replacement with a small (Gly) residue was the only substitution that did not markedly reduce the bacteriocin activity. The positive charge in K20 and the polar amide group in N27 appeared to interact with electronegative groups, since the replacement of these two residues with a positive (Arg) residue was well tolerated, while replacement with a negative (Asp) residue was detrimental to the bacteriocin activity. K20 was in a less constrained environment than N27, since the replacement of K20 with a large hydrophobic (Leu) residue was tolerated fairly well and to a greater extent than N27. T23 seemed to be in an environment that was not restricted with respect to size, polarity, and charge, since replacements with large (Leu) and small (Ala) hydrophobic residues and a hydrophilic negative (Asp) residue were tolerated fairly well (2- to 6-fold reduction in activity). Moreover, the replacement of T23 with a large positive (Arg) residue resulted in wild-type or better-than-wild-type activity.

Structural characterisation of the natively unfolded enterocin EJ97

Bacteriocins belong to the wide variety of antimicrobial ribosomal peptides synthesised by bacteria. Enterococci are Gram-positive, catalase-negative bacteria that produce lactic acid as the major end product of glucose fermentation. Many enterococcal strains produce bacteriocins, named enterocins. We describe in this work, the structural characterisation of the 44 residues-long enterocin EJ97, produced by Enterococcus faecalis EJ97. To this end, we have used a combined theoretical and experimental approach. First, we have characterised experimentally the conformational properties of EJ97 in solution under different conditions by using a number of spectroscopic techniques, namely fluorescence, CD, FTIR and NMR. Then, we have used several bioinformatic tools as an aid to complement the experimental information about the conformational properties of EJ97. We have shown that EJ97 is monomeric in aqueous solution and that it appears to be chiefly unfolded, save some flickering helical- or turn-like structures, probably stabilised by hydrophobic clustering. Accordingly, EJ97 does not show a cooperative sigmoidal transition when heated or upon addition of GdmCl. These conformational features are essentially pH-independent, as shown by NMR assignments at pHs 5.9 and 7.0. The computational results were puzzling, since some algorithms revealed the natively unfolded character of EJ97 (FoldIndex, the mean scaled hydropathy), whereas some others suggested the presence of ordered structure in its central region (PONDR, RONN and IUPRED). A future challenge is to produce much more experimental results to aid the development of accurate software tools for predicting disorder in proteins.

The structure of pyogenecin immunity protein, a novel bacteriocin-like immunity protein from Streptococcus pyogenes

Background

Many Gram-positive lactic acid bacteria (LAB) produce anti-bacterial peptides and small proteins called bacteriocins, which enable them to compete against other bacteria in the environment. These peptides fall structurally into three different classes, I, II, III, with class IIa being pediocin-like single entities and class IIb being two-peptide bacteriocins. Self-protective cognate immunity proteins are usually co-transcribed with these toxins. Several examples of cognates for IIa have already been solved structurally. Streptococcus pyogenes, closely related to LAB, is one of the most common human pathogens, so knowledge of how it competes against other LAB species is likely to prove invaluable.

Results

We have solved the crystal structure of the gene-product of locus Spy_2152 from S. pyogenes, (PDB:2fu2), and found it to comprise an anti-parallel four-helix bundle that is structurally similar to other bacteriocin immunity proteins. Sequence analyses indicate this protein to be a possible immunity protein protective against class IIa or IIb bacteriocins. However, given that S. pyogenes appears to lack any IIa pediocin-like proteins but does possess class IIb bacteriocins, we suggest this protein confers immunity to IIb-like peptides.

Conclusions

Combined structural, genomic and proteomic analyses have allowed the identification and in silico characterization of a new putative immunity protein from S. pyogenes, possibly the first structure of an immunity protein protective against potential class IIb two-peptide bacteriocins. We have named the two pairs of putative bacteriocins found in S. pyogenes pyogenecin 1, 2, 3 and 4.

Structure and Mode-of-Action of the Two-Peptide (Class-IIb) Bacteriocins

This review focuses on the structure and mode-of-action of the two-peptide (class-IIb) bacteriocins that consist of two different peptides whose genes are next to each other in the same operon. Optimal antibacterial activity requires the presence of both peptides in about equal amounts. The two peptides are synthesized as preforms that contain a 15–30 residue double-glycine-type N-terminal leader sequence that is cleaved off at the C-terminal side of two glycine residues by a dedicated ABC-transporter that concomitantly transfers the bacteriocin peptides across cell membranes. Two-peptide bacteriocins render the membrane of sensitive bacteria permeable to a selected group of ions, indicating that the bacteriocins form or induce the formation of pores that display specificity with respect to the transport of molecules. Based on structure–function studies, it has been proposed that the two peptides of two-peptide bacteriocins form a membrane-penetrating helix–helix structure involving helix–helix-interacting GxxxG-motifs that are present in all characterized two-peptide bacteriocins. It has also been suggested that the membrane-penetrating helix–helix structure interacts with an integrated membrane protein, thereby triggering a conformational alteration in the protein, which in turn causes membrane-leakage. This proposed mode-of-action is similar to the mode-of-action of the pediocin-like (class-IIa) bacteriocins and lactococcin A (a class-IId bacteriocin), which bind to a membrane-embedded part of the mannose phosphotransferase permease in a manner that causes membrane-leakage and cell death.

Characterization of mundticin L, a class IIa anti-Listeria bacteriocin from Enterococcus mundtii CUGF08

Enterococcus mundtii CUGF08, a lactic acid bacterium isolated from alfalfa sprouts, was found to produce mundticin L, a new class IIa bacteriocin that has a high level of inhibitory activity against the genus Listeria. The plasmid-associated operons containing genes for the mundticin L precursor, the ATP binding cassette (ABC) transporter, and immunity were cloned and sequenced. The fifth residue of the conservative consensus sequence YGNGX in the mature bacteriocin is leucine instead of valine in the sequences of the homologous molecules mundticin KS (ATO6) and enterocin CRL35. The primary structures of the ABC transporter and the immunity protein are homologous but unique.

Insights into structure-activity relationships in the C-terminal region of divercin V41, a class IIa bacteriocin with high-level antilisterial activity

Divercin V41 (DvnV41) is a class IIa bacteriocin with potent antilisterial activity isolated from Carnobacterium divergens V41. Previously, we expressed from a synthetic gene, in Escherichia coli Origami, a recombinant DvnV41 designated DvnRV41, which possesses four additional amino acids (AMDP) in the N-terminal region that result from enzymatic cleavage and retains the initial DvnV41 activity. To unravel the relationship between the structure of DvnRV41 and its particularly elevated activity, we produced by site-directed mutagenesis eight variants in which a single amino acid replacement was specifically introduced into the sequence. The point mutations were designed to change either conserved residues in class IIa bacteriocins or residues specific to DvnV41 located mainly in the C-terminal region. The fusion proteins were purified from the cytosoluble fractions by immobilized affinity chromatography. DvnRV41 and its variants were released from the fusion proteins by enzymatic cleavage, using enterokinase. The purity of DvnRV41 and of the variants was checked by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, high-performance liquid chromatography, and mass spectrometry. The antibacterial activity of DvnRV41 and its variants was assessed using different indicator strains, including Listeria monocytogenes EGDe and Enterococcus faecalis JH2-2. The activity of all of the variants appeared to be less than the activity of DvnRV41. The decrease in activity did not appear to be related to a global conformational change, as determined by circular dichroism. Overall, the variants of DvnRV41 produced in the present study provide interesting insights into structure-activity relationships of class IIa bacteriocins.

Mutational analysis of the class IIa bacteriocin curvacin A and its orientation in target cell membranes

To analyze the orientation in target cell membranes of the pediocin-like bacteriocin (antimicrobial peptide) curvacin A, 55 variants were generated by site-directed mutagenesis and their potencies against four different target cells determined. The result suggest that the somewhat hydrophilic short central helix (residues 19 to 24), along with the N-terminal beta-sheet-like structure (residues 1 to 16), inserts in the interface region of the target cell membrane, with Ala22 close to the hydrophobic core of the membrane. The following hinge region, with Gly28 as an important residue, may then form a turn wherein Gly28 becomes positioned near the border between the interface and the hydrophobic regions, thus permitting the longer and more-hydrophobic C-terminal helix (residues 29 to 41) to insert into the hydrophobic core of the membrane. This helix contains three glycine residues (G33, G37, and G40) that form a putative helix-helix-interacting GxxxGxxG motif. The replacement of any of these glycines with a larger residue was very detrimental, suggesting their possible involvement in helix-helix interactions with a membrane-embedded receptor protein.

Nuclear magnetic resonance solution structure of PisI, a group B immunity protein that provides protection against the type IIa bacteriocin piscicolin 126, PisA

Lactic acid bacteria produce and secrete bacteriocins. These bacteriocins are potent antimicrobial peptides that are active against other closely related bacteria. As a means of self-protection, producer organisms also express immunity proteins. Immunity proteins are generally located on the same genetic locus and are cotranscribed with the bacteriocin. Although some cross immunity between bacteriocins has been observed, immunity proteins are typically highly specific. Immunity proteins for the type IIa bacteriocins range from 81 to 115 amino acids in length and display substantial variation in their sequences. Nonetheless, such immunity proteins have been classified into three groupings (groups A, B, and C) according to sequence homology. The structures of a group C (ImB2) and two group A (EntA-im and PedB) immunity proteins have previously been reported. We herein report the nuclear magnetic resonance solution structure of the remaining class of the type IIa immunity proteins. PisI, a 98-amino acid protein, is a group B immunity protein conferring immunity against piscicolin 126 (PisA). Like ImB2, EntA-im, and PedB, PisI folds into a globular protein in aqueous solution and contains an antiparallel four-helix bundle. Compared to ImB2 and EntA-im, PisI has a substantially longer and more flexible N-terminus, but a shorter C-terminus. No direct interaction between the bacteriocin and immunity protein is observed by NMR in either aqueous or membrane mimicking environments. This further suggests that the mechanism that mediates immunity is not due to a direct bacteriocin-immunity protein interaction but rather is receptor-mediated. It has now been confirmed that the four-helix bundle is indeed a structural motif among the type IIa immunity proteins.

Three-dimensional structure of the two peptides that constitute the two-peptide bacteriocin plantaricin EF

The three-dimensional structures of the two peptides plantaricin E (plnE; 33 residues) and plantaricin F (plnF; 34 residues) constituting the two-peptide bacteriocin plantaricin EF (plnEF) have been determined by nuclear magnetic resonance (NMR) spectroscopy in the presence of DPC micelles. PlnE has an N-terminal alpha-helix (residues 10-21), and a C-terminal alpha-helix-like structure (residues 25-31). PlnF has a long central alpha-helix (residues 7-32) with a kink of 38+/-7 degrees at Pro20. There is some flexibility in the helix in the kink region. Both helices in plnE are amphiphilic, while the helix in plnF is polar in its N-terminal half and amphiphilic in its C-terminal half. The alpha-helical content obtained by NMR spectroscopy is in agreement with CD studies. PlnE has two GxxxG motifs which are putative helix-helix interaction motifs, one at residues 5 to 9 and one at residues 20 to 24, while plnF has one such motif at residues 30 to 34. The peptides are flexible in these GxxxG regions. It is suggested that the two peptides lie parallel in a staggered fashion relative to each other and interact through helix-helix interactions involving the GxxxG motifs.

Three-dimensional structure of the two peptides that constitute the two-peptide bacteriocin lactococcin G

The three-dimensional structures of the two peptides, lactococcin G-alpha (LcnG-alpha; contains 39 residues) and lactococcin G-beta (LcnG-beta, contains 35 residues), that constitute the two-peptide bacteriocin lactococcin G (LcnG) have been determined by nuclear magnetic resonance (NMR) spectroscopy in the presence of DPC micelles and TFE. In DPC, LcnG-alpha has an N-terminal alpha-helix (residues 3-21) that contains a GxxxG helix-helix interaction motif (residues 7-11) and a less well defined C-terminal alpha-helix (residues 24-34), and in between (residues 18-22) there is a second somewhat flexible GxxxG-motif. Its structure in TFE was similar. In DPC, LcnG-beta has an N-terminal alpha-helix (residues 6-19). The region from residues 20 to 35, which also contains a flexible GxxxG-motif (residues 18-22), appeared to be fairly unstructured in DPC. In the presence of TFE, however, the region between and including residues 23 and 32 formed a well defined alpha-helix. The N-terminal helix between and including residues 6 and 19 seen in the presence of DPC, was broken at residues 8 and 9 in the presence of TFE. The N-terminal helices, both in LcnG-alpha and -beta, are amphiphilic. We postulate that LcnG-alpha and -beta have a parallel orientation and interact through helix-helix interactions involving the first GxxxG (residues 7-11) motif in LcnG-alpha and the one (residues 18-22) in LcnG-beta, and that they thus lie in a staggered fashion relative to each other.

Development of innovative pediocin PA-1 by DNA shuffling among class IIa bacteriocins

Pediocin PA-1 is a member of the class IIa bacteriocins, which show antimicrobial effects against lactic acid bacteria. To develop an improved version of pediocin PA-1, reciprocal chimeras between pediocin PA-1 and enterocin A, another class IIa bacteriocin, were constructed. Chimera EP, which consisted of the C-terminal half of pediocin PA-1 fused to the N-terminal half of enterocin A, showed increased activity against a strain of Leuconostoc lactis isolated from a sour-spoiled dairy product. To develop an even more effective version of this chimera, a DNA-shuffling library was constructed, wherein four specific regions within the N-terminal half of pediocin PA-1 were shuffled with the corresponding sequences from 10 other class IIa bacteriocins. Activity screening indicated that 63 out of 280 shuffled mutants had antimicrobial activity. A colony overlay activity assay showed that one of the mutants (designated B1) produced a >7.8-mm growth inhibition circle on L. lactis, whereas the parent pediocin PA-1 did not produce any circle. Furthermore, the active shuffled mutants showed increased activity against various species of Lactobacillus, Pediococcus, and Carnobacterium. Sequence analysis revealed that the active mutants had novel N-terminal sequences; in active mutant B1, for example, the parental pediocin PA-1 sequence (KYYGNGVTCGKHSC) was changed to TKYYGNGVSCTKSGC. These new and improved DNA-shuffled bacteriocins could prove useful as food additives for inhibiting sour spoilage of dairy products.

Molecular dynamics simulation study of interaction between a class IIa bacteriocin and its immunity protein

Molecular dynamics (MD) simulations of carnobacteriocin B2 (CbnB2), a structurally well-characterized class IIa bacteriocin, and its immunity protein (ImB2) in lipid bilayer environment have been conducted to explore the interaction between them. Six 30-ns simulations were conducted in DPPC or POPG bilayer systems. In these simulations, ImB2 was placed in the aqueous layer with different orientations facing CbnB2 to sample all the faces of ImB2. The MD results indicate that (i) while CbnB2 remained embedded in the bilayer, it tends to move toward the interface, and (ii) the presence of CbnB2 in the DPPC bilayer attracts ImB2 toward the bilayer. In one of the orientations in DPPC bilayer system (simulation 1), ImB2 penetrates the bilayer and interacts with CbnB2 by ion-pair interaction. At several instances toward the later half of the simulation (15-30 ns), ImB2 and CbnB2 were found to form salt-bridge between Arg95 of ImB2 and Glu24 of CbnB2. Simulation in POPG bilayer displayed strong interaction between the positively charged ImB2 and the negatively charged polar head groups of the POPG molecules at the lipid-water interface. However, ImB2 was not able to penetrate the bilayer thereby preventing any interaction between ImB2 and CbnB2.

Short peptides derived from the NH2-terminus of subclass IIa bacteriocin enterocin CRL35 show antimicrobial activity

OBJECTIVES

Subclass IIa bacteriocins are characterized by a hydrophilic N-terminal domain that shares a YGNGVxCxxxxC consensus and a variable hydrophobic C-terminus. Enterocin CRL35 is a 43-amino-acid heat stable peptide with antilisterial activity. Short synthetic peptides derived from the N-terminal half of enterocin CRL35 and other subclass IIa bacteriocins were evaluated for antimicrobial properties.

METHODS

In vitro activities of synthetic peptides were evaluated in complex, chemically defined and minimal media. MIC assays were performed by the agar well-diffusion method. Fluorescence assays to evaluate the dissipation of membrane potentials in intact cells were carried out. Time-kill kinetics of Listeria innocua cells with the active peptide were performed.

RESULTS AND CONCLUSIONS

A 15-mer peptide derived from enterocin CRL35 inhibited the growth of L. innocua and Listeria monocytogenes in synthetic/minimal media and dissipated the membrane potential of sensitive cells, with MICs of 10 and 50 microM, respectively. 15-mer derivatives from other class IIa bacteriocins (mesentericin Y105, pediocin PA-1 and piscicolin 126) also showed antimicrobial activities.

Phospholamban and its phosphorylated form interact differently with lipid bilayers: a 31P, 2H, and 13C solid-state NMR spectroscopic study

Phospholamban (PLB) is a 52-amino acid integral membrane protein that helps to regulate the flow of Ca(2+) ions in cardiac muscle cells. Recent structural studies on the PLB pentamer and the functionally active monomer (AFA-PLB) debate whether its cytoplasmic domain, in either the phosphorylated or dephosphorylated states, is alpha-helical in structure as well as whether it associates with the lipid head groups (Oxenoid, K. (2005) Proc. Natl. Acad. Sci. U.S.A. 102, 10870-10875; Karim, C. B. (2004) Proc. Natl. Acad. Sci. U.S.A. 101, 14437-14442; Andronesi, C.A. (2005) J. Am. Chem. Soc. 127, 12965-12974; Li, J. (2003) Biochemistry 42, 10674-10682; Metcalfe, E. E. (2005) Biochemistry 44, 4386-4396: Clayton, J. C. (2005) Biochemistry 44, 17016-17026). Comparing the secondary structure of the PLB pentamer and its phosphorylated form (P-PLB) as well as their interaction with the lipid bilayer is crucial in order to understand its regulatory function. Therefore, in this study, the full-length wild-type (WT) PLB and P-PLB were incorporated into 1-palmitoyl-2-oleoyl-sn-glycero-phosphocholine (POPC) phospholipid bilayers and studied utilizing solid-state NMR spectroscopy. The analysis of the (2)H and (31)P solid-state NMR data of PLB and P-PLB in POPC multilamellar vesicles (MLVs) indicates that a direct interaction takes place between both proteins and the phospholipid head groups. However, the interaction of P-PLB with POPC bilayers was less significant compared that with PLB. Moreover, the secondary structure using (13)C=O site-specific isotopically labeled Ala15-PLB and Ala15-P-PLB in POPC bilayers suggests that this residue, located in the cytoplasmic domain, is a part of an alpha-helical structure for both PLB and P-PLB.

The continuing story of class IIa bacteriocins

Many bacteria produce antimicrobial peptides, which are also referred to as peptide bacteriocins. The class IIa bacteriocins, often designated pediocin-like bacteriocins, constitute the most dominant group of antimicrobial peptides produced by lactic acid bacteria. The bacteriocins that belong to this class are structurally related and kill target cells by membrane permeabilization. Despite their structural similarity, class IIa bacteriocins display different target cell specificities. In the search for new antibiotic substances, the class IIa bacteriocins have been identified as promising new candidates and have thus received much attention. They kill some pathogenic bacteria (e.g., Listeria) with high efficiency, and they constitute a good model system for structure-function analyses of antimicrobial peptides in general. This review focuses on class IIa bacteriocins, especially on their structure, function, mode of action, biosynthesis, bacteriocin immunity, and current food applications. The genetics and biosynthesis of class IIa bacteriocins are well understood. The bacteriocins are ribosomally synthesized with an N-terminal leader sequence, which is cleaved off upon secretion. After externalization, the class IIa bacteriocins attach to potential target cells and, through electrostatic and hydrophobic interactions, subsequently permeabilize the cell membrane of sensitive cells. Recent observations suggest that a chiral interaction and possibly the presence of a mannose permease protein on the target cell surface are required for a bacteria to be sensitive to class IIa bacteriocins. There is also substantial evidence that the C-terminal half penetrates into the target cell membrane, and it plays an important role in determining the target cell specificity of these bacteriocins. Immunity proteins protect the bacteriocin producer from the bacteriocin it secretes. The three-dimensional structures of two class IIa immunity proteins have been determined, and it has been shown that the C-terminal halves of these cytosolic four-helix bundle proteins specify which class IIa bacteriocin they protect against.

Mutational analysis and membrane-interactions of the β-sheet-like N-terminal domain of the pediocin-like antimicrobial peptide sakacin P

To gain insight into how the N-terminal three-stranded beta-sheet-like domain in pediocin-like antimicrobial peptides positions itself on membranes, residues in the well-conserved (Y)YGNGV-motif in the domain were substituted and the effect of the substitutions on antimicrobial activity and binding of peptides to liposomes was determined. Peptide-liposome interactions were detected by measuring tryptophan-fluorescence upon exposing liposomes to peptides in which a tryptophan residue had been introduced in the N-terminal domain. The results revealed that the N-terminal domain associates readily with anionic liposomes, but not with neutral liposomes. The electrostatic interactions between peptides and liposomes facilitated the penetration of some of the peptide residues into the liposomes. Measuring the antimicrobial activity of the mutated peptides revealed that the Tyr2Leu and Tyr3Leu mutations resulted in about a 10-fold reduction in activity, whereas the Tyr2Trp, Tyr2Phe, Tyr3Trp and Tyr3Phe mutations were tolerated fairly well, especially the mutations in position 3. The Val7Ile mutation did not have a marked detrimental effect on the activity. The Gly6Ala mutation was highly detrimental, consistent with Gly6 being in one of the turns in the beta-sheet-like N-terminal domain, whereas the Gly4Ala mutation was tolerated fairly well. All mutations involving Asn5, including the conservative mutations Asn5Gln and Asn5Asp, were very deleterious. Thus, both the polar amide group on the side chain of Asn5 and its exact position in space were crucial for the peptides to be fully active. Taken together, the results are consistent with Val7 positioning itself in the hydrophobic core of target membranes, thus forcing most of the other residues in the N-terminal domain into the membrane interface region: Tyr3 and Asn5 in the lower half with their side chains pointing downward and approaching the hydrophobic core, Tyr2, Gly4 and His8 and 12 in the upper half, Lys1 near the middle of the interface region, and the side chain of Lys11 pointing out toward the membrane surface.