Mechanistic studies of the yeast polyamine oxidase Fms1: kinetic mechanism, substrate specificity, and pH dependence

Computational Insights on the Hydride and Proton Transfer Mechanisms of D-Arginine Dehydrogenase

D-Arginine dehydrogenase from Pseudomonas aeruginosa (PaDADH) is an amine oxidase which catalyzes the conversion of D-arginine into iminoarginine. It contains a non-covalent FAD cofactor that is involved in the oxidation mechanism. Based on substrate, solvent, and multiple kinetic isotope effects studies, a stepwise hydride transfer mechanism is proposed. It was shown that D-arginine binds to the active site of enzyme as α-amino group protonated, and it is deprotonated before a hydride ion is transferred from its α-C to FAD. Based on a mutagenesis study, it was concluded that a water molecule is the most likely catalytic base responsible from the deprotonation of α-amino group. In this study, we formulated computational models based on ONIOM method to elucidate the oxidation mechanism of D-arginine into iminoarginine using the crystal structure of enzyme complexed with iminoarginine. The calculations showed that Arg222, Arg305, Tyr249, Glu87, His 48, and two active site water molecules play key roles in binding and catalysis. Model systems showed that the deprotonation step occurs prior to hydride transfer step, and active site water molecule(s) may have participated in the deprotonation process.

On the use of noncompetitive kinetic isotope effects to investigate flavoenzyme mechanism

This account describes the application of kinetic isotope effects (KIEs) to investigate the mechanistic properties of flavin dependent enzymes. Assays can be conducted during steady-state catalytic turnover of the flavoenzyme with its substrate or by using rapid-kinetic techniques to measure either the reductive or oxidative half-reactions of the enzyme. Great care should be taken to ensure that the observed effects are due to isotopic substitution and not other factors such as pH effects or changes in the solvent viscosity of the reaction mixture. Different types of KIEs are described along with a physical description of their origins and the unique information each can provide about the mechanism of an enzyme. Detailed experimental techniques are outlined with special emphasis on the proper controls and data analysis that must be carried out to avoid erroneous conclusions. Examples are provided for each type of KIE measurement from references in the literature. It is our hope that this article will clarify any confusion concerning the utility of KIEs in the study of flavoprotein mechanism and encourage their use by the community.

Controlling the regioselectivity and stereospecificity of FAD-dependent polyamine oxidases with the use of amine-attached guide molecules as conformational modulators

Enzymes generally display strict stereospecificity and regioselectivity for their substrates. Here by using FAD-dependent human acetylpolyamine oxidase (APAO), human spermine (Spm) oxidase (SMOX) and yeast polyamine oxidase (Fms1), we demonstrate that these fundamental properties of the enzymes may be regulated using simple guide molecules, being either covalently attached to polyamines or used as a supplement to the substrate mixtures. APAO, which naturally metabolizes achiral N1-acetylated polyamines, displays aldehyde-controllable stereospecificity with chiral 1-methylated polyamines, like (R)- and (S)-1-methylspermidine (1,8-diamino-5-azanonane) (1-MeSpd). Among the novel N1-acyl derivatives of MeSpd, isonicotinic acid (P4) or benzoic acid (Bz) with (R)-MeSpd had Km of 3.6 ± 0.6/1.2 ± 0.7 µM and kcat of 5.2 ± 0.6/4.6 ± 0.7 s-1 respectively, while N1 -AcSpd had Km 8.2 ± 0.4 µM and kcat 2.7 ± 0.0 s-1 On the contrary, corresponding (S)-MeSpd amides were practically inactive (kcat < 0.03 s-1) but they retained micromole level Km for APAO. SMOX did not metabolize any of the tested compounds (kcat < 0.05 s-1) that acted as non-competitive inhibitors having Ki ≥ 155 µM for SMOX. In addition, we tested (R,R)-1,12-bis-methylspermine (2,13-diamino-5,10-diazatetradecane) (R,R)-(Me2Spm) and (S,S)-Me2Spm as substrates for Fms1. Fms1 preferred (S,S)- to (R,R)-diastereoisomer, but with notably lower kcat in comparison with spermine. Interestingly, Fms1 was prone to aldehyde supplementation in its regioselectivity, i.e. the cleavage site of spermidine. Thus, aldehyde supplementation to generate aldimines or N-terminal substituents in polyamines, i.e. attachment of guide molecule, generates novel ligands with altered charge distribution changing the binding and catalytic properties with polyamine oxidases. This provides means for exploiting hidden capabilities of polyamine oxidases for controlling their regioselectivity and stereospecificity.

The Structure of Murine N1-Acetylspermine Oxidase Reveals Molecular Details of Vertebrate Polyamine Catabolism

N¹-Acetylspermine oxidase (APAO) catalyzes the conversion of N¹-acetylspermine or N¹-acetylspermidine to spermidine or putrescine, respectively, with concomitant formation of N-acetyl-3-aminopropanal and hydrogen peroxide. Here we present the structure of murine APAO in its oxidized holo form and in complex with substrate. The structures provide a basis for understanding molecular details of substrate interaction in vertebrate APAO, highlighting a key role for an asparagine residue in coordinating the N¹-acetyl group of the substrate. We applied computational methods to the crystal structures to rationalize previous observations with regard to the substrate charge state. The analysis suggests that APAO features an active site ideally suited for binding of charged polyamines. We also reveal the structure of APAO in complex with the irreversible inhibitor MDL72527. In addition to the covalent adduct, a second MDL72527 molecule is bound in the active site. Binding of MDL72527 is accompanied by altered conformations in the APAO backbone. On the basis of structures of APAO, we discuss the potential for development of specific inhibitors.

Kinetic mechanism of putrescine oxidase from Rhodococcus erythropolis

Putrescine oxidase from Rhodococcus erythropolis (PuO) is a flavin-containing amine oxidase from the monoamine oxidase family that performs oxidative deamination of aliphatic diamines. In this study we report pre-steady-state kinetic analyses of the enzyme with the use of single- and double-mixing stopped-flow spectroscopy and putrescine as a substrate. During the fast and irreversible reductive half-reaction no radical intermediates were observed, suggesting a direct hydride transfer from the substrate to the FAD. The rate constant of flavin reoxidation depends on the ligand binding; when the imine product was bound to the enzyme the rate constant was higher than with free enzyme species. Similar results were obtained with product-mimicking ligands and this indicates that a ternary complex is formed during catalysis. The obtained kinetic data were used together with steady-state rate equations derived for ping-pong, ordered sequential and bifurcated mechanisms to explore which mechanism is operative. The integrated analysis revealed that PuO employs a bifurcated mechanism due to comparable rate constants of product release from the reduced enzyme and reoxidation of the reduced enzyme-product complex.

Mechanistic and structural analyses of the roles of active site residues in yeast polyamine oxidase Fms1: characterization of the N195A and D94N enzymes

Flavoprotein Fms1 from Saccharomyces cerevisiae catalyzes the oxidation of spermine in the biosynthetic pathway for pantothenic acid. The same reaction is catalyzed by the mammalian polyamine and spermine oxidases. The active site of Fms1 contains three amino acid residues positioned to interact with the polyamine substrate, His67, Asn195, and Asp94. These three residues form a hydrogen-bonding triad with Asn195 being the central residue. Previous studies of the effects of mutating His67 are consistent with that residue being important both for interacting with the substrate and for maintaining the hydrogen bonds in the triad [Adachi, M. S., Taylor, A. B., Hart, P. J., and Fitzpatrick, P. F. (2012) Biochemistry 51, 4888-4897]. The N195A and D94N enzymes have now been characterized to evaluate their roles in catalysis. Both mutations primarily affect the reductive half-reaction. With N(1)-acetylspermine as the substrate, the rate constant for flavin reduction decreases ~450-fold for both mutations; the effects with spermine as the substrate are smaller, 20-40-fold. The k(cat)/K(amine)- and k(cat)-pH profiles with N(1)-acetylspermine are only slightly changed from the profiles for the wild-type enzyme, consistent with the pK(a) values arising from the amine substrate or product and not from active site residues. The structure of the N195A enzyme was determined at a resolution of 2.0 Å. The structure shows a molecule of tetraethylene glycol in the active site and establishes that the mutation has no effect on the protein structure. Overall, the results are consistent with the role of Asn195 and Asp94 being to properly position the polyamine substrate for oxidation.

Isotope effects suggest a stepwise mechanism for berberine bridge enzyme

The flavoprotein Berberine Bridge Enzyme (BBE) catalyzes the regioselective oxidative cyclization of (S)-reticuline to (S)-scoulerine in an alkaloid biosynthetic pathway. A series of solvent and substrate deuterium kinetic isotope effect studies were conducted to discriminate between a concerted mechanism, in which deprotonation of the substrate phenol occurs before or during the transfer of a hydride from the substrate to the flavin cofactor and substrate cyclization, and a stepwise mechanism, in which hydride transfer results in the formation of a methylene iminium ion intermediate that is subsequently cyclized. The substrate deuterium isotope effect of 3.5 on k(red), the rate constant for flavin reduction, is pH-independent, indicating that C-H bond cleavage is rate-limiting during flavin reduction. Solvent isotope effects on k(red) are equal to 1 for both wild-type BBE and the E417Q mutant, indicating that solvent exchangeable protons are not in flight during or before flavin reduction, thus eliminating a fully concerted mechanism as a possibility for catalysis by BBE. An intermediate was not detected by rapid chemical quench or continuous-flow mass spectrometry experiments, indicating that it must be short-lived.

Mechanistic and structural analyses of the role of His67 in the yeast polyamine oxidase Fms1

The flavoprotein oxidase Fms1 from Saccharomyces cerevisiae catalyzes the oxidation of spermine and N(1)-acetylspermine to spermidine and 3-aminopropanal or N-acetyl-3-aminopropanal. Within the active site of Fms1, His67 is positioned to form hydrogen bonds with the polyamine substrate. This residue is also conserved in other polyamine oxidases. The catalytic properties of H67Q, H67N, and H67A Fms1 have been characterized to evaluate the role of this residue in catalysis. With both spermine and N(1)-acetylspermine as the amine substrate, the value of the first-order rate constant for flavin reduction decreases 2-3 orders of magnitude, with the H67Q mutation having the smallest effect and H67N the largest. The k(cat)/K(O2) value changes very little upon mutation with N(1)-acetylspermine as the amine substrate and decreases only an order of magnitude with spermine. The k(cat)/K(M)-pH profiles with N(1)-acetylspermine are bell-shaped for all the mutants; the similarity to the profile of the wild-type enzyme rules out His67 as being responsible for either of the pK(a) values. The pH profiles for the rate constant for flavin reduction for all the mutant enzymes similarly show the same pK(a) as wild-type Fms1, about ∼7.4; this pK(a) is assigned to the substrate N4. The k(cat)/K(O2)-pH profiles for wild-type Fms1 and the H67A enzyme both show a pK(a) of about ∼6.9; this suggests His67 is not responsible for this pH behavior. With the H67Q, H67N, and H67A enzymes the k(cat) value decreases when a single residue is protonated, as is the case with the wild-type enzyme. The structure of H67Q Fms1 has been determined at a resolution of 2.4 Å. The structure shows that the mutation disrupts a hydrogen bond network in the active site, suggesting that His67 is important both for direct interactions with the substrate and to maintain the overall active site structure.

Spermine oxidase: ten years after

Spermine oxidase (SMO) was discovered much more recently than other enzymes involved in polyamine metabolism; this review summarizes 10 years of researches on this enzyme. Spermine oxidase (SMO) is a FAD-dependent enzyme that specifically oxidizes spermine (Spm) and plays a dominant role in the highly regulated mammalian polyamines catabolism. SMO participates in drug response, apoptosis, response to stressful stimuli and etiology of several pathological conditions, including cancer. SMO is a highly inducible enzyme, its deregulation can alter polyamine homeostasis, and dysregulation of polyamine catabolism is often associated with several disease states. The oxidative products of SMO activity are spermidine, and the reactive oxygen species H(2)O(2) and the aldehyde 3-aminopropanal each with the potential to produce cellular damages and pathologies. The SMO substrate Spm is a tetramine that plays mandatory roles in several cell functions, such as DNA synthesis, cellular proliferation, modulation of ion channels function, cellular signaling, nitric oxide synthesis and inhibition of immune responses. The goal of this review is to cover the main biochemical, cellular and physiological processes in which SMO is involved.

Structures and Mechanism of the Monoamine Oxidase Family

Members of the monoamine oxidase family of flavoproteins catalyze the oxidation of primary and secondary amines, polyamines, amino acids, and methylated lysine side chains in proteins. The enzymes have similar overall structures, with conserved FAD-binding domains and varied substrate-binding sites. Multiple mechanisms have been proposed for the catalytic reactions of these enzymes. The present review compares the structures of different members of the family and the various mechanistic proposals.