Chemistry with an artificial primer of polyhydroxybutyrate synthase suggests a mechanism for chain termination

The PHB Granule Biogenesis Pathway in Caulobacter

PHB granules are bacterial organelles that store excess carbohydrates in the form of water-insoluble polyhydroxybutyrate (PHB). The PHB polymerase, phasin (a small amphipathic protein), and active PHB synthesis are essential for the formation of mature PHB granules in Caulobacter crescentus. Granule formation was found to be initiated by the condensation of self-associating PHB polymerase-GFP into foci, closely followed by the recruitment and condensation of phasin-mCherry. Following the active synthesis of PHB and granule maturation, the polymerase dissociates from mature granules and the PHB depolymerase is recruited to the granule. The polymerase directly binds phasin in vitro through its intrinsically disordered N-terminal domain. Thus, granule biogenesis is initiated and controlled by the action of a PHB polymerase and an associated helper protein, phasin, that together synthesize the hydrophobic granule's content while forming the granules protein boundary.

Real-time NMR analysis of polyhydroxyalkanoate synthase reaction that synthesizes block copolymer comprising glycolate and 3-hydroxybutyrate

The sequence-regulating polyhydroxyalkanoate (PHA) synthase PhaC_AR spontaneously synthesizes the homo-random block copolymer, poly[3-hydroxybutyrate (3HB)]-b-poly[glycolate (GL)-ran-3HB]. In this study, a real-time in vitro chasing system was established using a high-resolution 800 MHz nuclear magnetic resonance (NMR) and ¹³C-labeled monomers to monitor the polymerization of GL-CoA and 3HB-CoA into this atypical copolymer. Consequently, PhaC_AR initially consumed only 3HB-CoA and subsequently consumed both substrates. The structure of the nascent polymer was analyzed by extracting it with deuterated hexafluoro-isopropanol. In the primary reaction product, a 3HB-3HB dyad was detected, and GL-3HB linkages were subsequently formed. According to these results, the P(3HB) homopolymer segment is synthesized prior to the random copolymer segment. This is the first report of its kind which proposes the application of real-time NMR to a PHA synthase assay, paving the way for elucidating the mechanisms of PHA block copolymerization.

Versatile aliphatic polyester biosynthesis system for producing random and block copolymers composed of 2-, 3-, 4-, 5-, and 6-hydroxyalkanoates using the sequence-regulating polyhydroxyalkanoate synthase PhaCAR

BACKGROUND

Polyhydroxyalkanoates (PHAs) are microbial polyesters synthesized by PHA synthases. Naturally occurring PHA copolymers possess a random monomer sequence. The development of PhaCAR, a unique sequence-regulating PHA synthase, has enabled the spontaneous biosynthesis of PHA block copolymers. PhaCAR synthesizes both a block copolymer poly(2-hydroxybutyrate)-b-poly(3-hydroxybutyrate) [P(2HB)-b-P(3HB)], and a random copolymer, poly(3HB-co-3-hydroxyhexanoate), indicating that the combination of monomers determines the monomer sequence. Therefore, in this study, we explored the substrate scope of PhaCAR and the monomer sequences of the resulting copolymers to identify the determinants of the monomer sequence. PhaCAR is a class I PHA synthase that is thought to incorporate long-main-chain hydroxyalkanoates (LMC HAs, > C3 in the main [backbone] chain). Thus, the LMC monomers, 4-hydroxy-2-methylbutyrate (4H2MB), 5-hydroxyvalerate (5HV), and 6-hydroxyhexanoate (6HHx), as well as 2HB, 3HB, and 3-hydroxypropionate (3HP) were tested.

RESULTS

Recombinant Escherichia coli harboring PhaCAR, CoA transferase and CoA ligase genes was used for PHA production. The medium contained the monomer precursors, 2HB, 3HB, 3HP, 4H2MB, 5HV, and 6HHx, either individually or in combination. As a result, homopolymers were obtained only for 3HB and 3HP. Moreover, 3HB and 3HP were randomly copolymerized by PhaCAR. 3HB-based binary copolymers P(3HB-co-LMC HA)s containing up to 2.9 mol% 4H2MB, 4.8 mol% 5HV, or 1.8 mol% 6HHx were produced. Differential scanning calorimetry analysis of the copolymers indicated that P(3HB-co-LMC HA)s had a random sequence. In contrast, combining 3HP and 2HB induced the synthesis of P(3HP)-b-P(2HB). Similarly, P(2HB) segment-containing block copolymers P(3HB-co-LMC HA)-b-P(2HB)s were synthesized. Binary copolymers of LMC HAs and 2HB were not obtained, indicating that the 3HB or 3HP unit is essential to the polymer synthesis.

CONCLUSION

PhaCAR possesses a wide substrate scope towards 2-, 3-, 4-, 5-, and 6-hydroxyalkanoates. 3HB or 3HP units are essential for polymer synthesis using PhaCAR. The presence of a 2HB monomer is key to synthesizing block copolymers, such as P(3HP)-b-P(2HB) and P(3HB-co-LMC HA)-b-P(2HB)s. The copolymers that did not contain 2HB units had a random sequence. This study's results provide insights into the mechanism of sequence regulation by PhaCAR and pave the way for designing PHA block copolymers.

Directed Evolution of Sequence-Regulating Polyhydroxyalkanoate Synthase to Synthesize a Medium-Chain-Length-Short-Chain-Length (MCL-SCL) Block Copolymer

Sequence-regulating polyhydroxyalkanoate synthase PhaC_AR is a chimeric enzyme comprising PhaCs from Aeromonas caviae and Ralstonia eutropha (Cupriavidus necator). It spontaneously synthesizes a short-chain-length (SCL, ≤C₅) block copolymer poly(2-hydroxybutyrate)-b-poly(3-hydroxybutyrate) [P(2HB)-b-P(3HB)] from a mixture of monomer substrates. In this study, directed evolution of PhaC_AR was performed to increase its activity toward a medium-chain-length (MCL, C_6-12) monomer, 3-hydroxyhexanoyl (3HHx)-coenzyme A (CoA). Random mutagenesis and selection based on P(3HB-co-3HHx) production in Escherichia coli found that beneficial mutations N149D and F314L increase the 3HHx fraction. The site-directed saturation mutagenesis at position 314, which is adjacent to the catalytic center C315, demonstrated that F314H synthesizes the P(3HHx) homopolymer. The F314H mutant exhibited increased activity toward 3HHx-CoA compared with the parent enzyme, whereas the activity toward 3HB-CoA decreased. The predicted tertiary structure of PhaC_AR by AlphaFold2 provided insight into the mechanism of the beneficial mutations. In addition, this finding enabled the synthesis of a new PHA block copolymer, P(3HHx)-b-P(2HB). Solvent fractionation indicated the presence of a covalent linkage between the polymer segments. This novel MCL-SCL block copolymer considerably expands the range of the molecular design of PHA block copolymers.

Artificial polyhydroxyalkanoate poly[2-hydroxybutyrate-block-3-hydroxybutyrate] elastomer-like material

The first polyhydroxyalkanoate (PHA) block copolymer poly(2-hydroxybutyrate-b-3-hydroxybutyrate) [P(2HB-b-3HB)] was previously synthesized using engineered Escherichia coli expressing a chimeric PHA synthase PhaCAR with monomer sequence-regulating capacity. In the present study, the physical properties of the block copolymer and its relevant random copolymer P(2HB-ran-3HB) were evaluated. Stress-strain tests on the P(88 mol% 2HB-b-3HB) film showed an increasing stress value during elongation up to 393%. In addition, the block copolymer film exhibited slow contraction behavior after elongation, indicating that P(2HB-b-3HB) is an elastomer-like material. In contrast, the P(92 mol% 2HB-ran-3HB) film, which was stretched up to 692% with nearly constant stress, was stretchable but not elastic. The differential scanning calorimetry and wide-angle X-ray diffraction analyses indicated that the P(2HB-b-3HB) contained the amorphous P(2HB) phase and the crystalline P(3HB) phase, whereas P(2HB-ran-3HB) was wholly amorphous. Therefore, the elasticity of P(2HB-b-3HB) can be attributed to the presence of the crystalline P(3HB) phase and a noncovalent crosslinked structure by the crystals. These results show the potential of block PHAs as elastic materials.

Structural Insights into Polyhydroxyalkanoates Biosynthesis

Polyhydroxyalkanoates (PHAs) are diverse biopolyesters produced by numerous microorganisms and have attracted much attention as a substitute for petroleum-based polymers. Despite several decades of study, the detailed molecular mechanisms of PHA biosynthesis have remained unknown due to the lack of structural information on the key PHA biosynthetic enzyme PHA synthase. The recently determined crystal structure of PHA synthase, together with the structures of acetyl-coenzyme A (CoA) acetyltransferase and reductase, have changed this situation. Structural and biochemical studies provided important clues for the molecular mechanisms of each enzyme as well as the overall mechanism of PHA biosynthesis from acetyl-CoA. This new information and knowledge is expected to facilitate production of designed novel PHAs and also enhanced production of PHAs.

Structure of polyhydroxyalkanoate (PHA) synthase PhaC from Chromobacterium sp. USM2, producing biodegradable plastics

Polyhydroxyalkanoate (PHA) is a promising candidate for use as an alternative bioplastic to replace petroleum-based plastics. Our understanding of PHA synthase PhaC is poor due to the paucity of available three-dimensional structural information. Here we present a high-resolution crystal structure of the catalytic domain of PhaC from Chromobacterium sp. USM2, PhaC _Cs -CAT. The structure shows that PhaC _Cs -CAT forms an α/β hydrolase fold comprising α/β core and CAP subdomains. The active site containing Cys291, Asp447 and His477 is located at the bottom of the cavity, which is filled with water molecules and is covered by the partly disordered CAP subdomain. We designated our structure as the closed form, which is distinct from the recently reported catalytic domain from Cupriavidus necator (PhaC _Cn -CAT). Structural comparison showed PhaC _Cn -CAT adopting a partially open form maintaining a narrow substrate access channel to the active site, but no product egress. PhaC _Cs -CAT forms a face-to-face dimer mediated by the CAP subdomains. This arrangement of the dimer is also distinct from that of the PhaC _Cn -CAT dimer. These findings suggest that the CAP subdomain should undergo a conformational change during catalytic activity that involves rearrangement of the dimer to facilitate substrate entry and product formation and egress from the active site.

Structure of the Catalytic Domain of the Class I Polyhydroxybutyrate Synthase from Cupriavidus necator

Polyhydroxybutyrate synthase (PhaC) catalyzes the polymerization of 3-(R)-hydroxybutyryl-coenzyme A as a means of carbon storage in many bacteria. The resulting polymers can be used to make biodegradable materials with properties similar to those of thermoplastics and are an environmentally friendly alternative to traditional petroleum-based plastics. A full biochemical and mechanistic understanding of this process has been hindered in part by a lack of structural information on PhaC. Here we present the first structure of the catalytic domain (residues 201-589) of the class I PhaC from Cupriavidus necator (formerly Ralstonia eutropha) to 1.80 Å resolution. We observe a symmetrical dimeric architecture in which the active site of each monomer is separated from the other by ∼33 Å across an extensive dimer interface, suggesting a mechanism in which polyhydroxybutyrate biosynthesis occurs at a single active site. The structure additionally highlights key side chain interactions within the active site that play likely roles in facilitating catalysis, leading to the proposal of a modified mechanistic scheme involving two distinct roles for the active site histidine. We also identify putative substrate entrance and product egress routes within the enzyme, which are discussed in the context of previously reported biochemical observations. Our structure lays a foundation for further biochemical and structural characterization of PhaC, which could assist in engineering efforts for the production of eco-friendly materials.

Study of Class I and Class III Polyhydroxyalkanoate (PHA) Synthases with Substrates Containing a Modified Side Chain

Polyhydroxyalkanoates (PHAs) are carbon and energy storage polymers produced by a variety of microbial organisms under nutrient-limited conditions. They have been considered as an environmentally friendly alternative to oil-based plastics due to their renewability, versatility, and biodegradability. PHA synthase (PhaC) plays a central role in PHA biosynthesis, in which its activity and substrate specificity are major factors in determining the productivity and properties of the produced polymers. However, the effects of modifying the substrate side chain are not well understood because of the difficulty to accessing the desired analogues. In this report, a series of 3-(R)-hydroxyacyl coenzyme A (HACoA) analogues were synthesized and tested with class I synthases from Chromobacterium sp. USM2 (PhaCCs and A479S-PhaCCs) and Caulobacter crescentus (PhaCCc) as well as class III synthase from Allochromatium vinosum (PhaECAv). It was found that, while different PHA synthases displayed distinct preference with regard to the length of the alkyl side chains, they could withstand moderate side chain modifications such as terminal unsaturated bonds and the azide group. Specifically, the specific activity of PhaCCs toward propynyl analogue (HHxyCoA) was only 5-fold less than that toward the classical substrate HBCoA. The catalytic efficiency (kcat/Km) of PhaECAv toward azide analogue (HABCoA) was determined to be 2.86 × 10(5) M(-1) s(-1), which was 6.2% of the value of HBCoA (4.62 × 10(6) M(-1) s(-1)) measured in the presence of bovine serum albumin (BSA). These side chain modifications may be employed to introduce new material functions to PHAs as well as to study PHA biogenesis via click-chemistry, in which the latter remains unknown and is important for metabolic engineering to produce PHAs economically.