HIV-1 Peptide Vaccine Candidates: Selecting Constrained V3 Peptides with Highest Affinity to Antibody 447-52D

Requirements for Empirical Immunogenicity Trials, Rather than Structure-Based Design, for Developing an Effective HIV Vaccine

The claim that it is possible to rationally design a structure-based HIV-1 vaccine is based on misconceptions regarding the nature of protein epitopes and of immunological specificity. Attempts to use reverse vaccinology to generate an HIV-1 vaccine on the basis of the structure of viral epitopes bound to monoclonal neutralizing antibodies have failed so far because it was not possible to extrapolate from an observed antigenic structure to the immunogenic structure required in a vaccine. Vaccine immunogenicity depends on numerous extrinsic factors such as the host immunoglobulin gene repertoire, the presence of various cellular and regulatory mechanisms in the immunized host and the process of antibody affinity maturation. All these factors played a role in the appearance of the neutralizing antibody used to select the epitope to be investigated as potential vaccine immunogen, but they cannot be expected to be present in identical form in the host to be vaccinated. It is possible to rationally design and optimize an epitope to fit one particular antibody molecule or to improve the paratope binding efficacy of a monoclonal antibody intended for passive immunotherapy. What is not possible is to rationally design an HIV-1 vaccine immunogen that will elicit a protective polyclonal antibody response of predetermined efficacy. An effective vaccine immunogen can only be discovered by investigating experimentally the immunogenicity of a candidate molecule and demonstrating its ability to induce a protective immune response. It cannot be discovered by determining which epitopes of an engineered antigen molecule are recognized by a neutralizing monoclonal antibody. This means that empirical immunogenicity trials rather than structural analyses of antigens offer the best hope of discovering an HIV-1 vaccine.

Display of the HIV envelope protein at the yeast cell surface for immunogen development

As a step toward the development of variant forms of Env with enhanced immunogenic properties, we have expressed the glycoprotein in the yeast surface display system in a form that can be subjected to random mutagenesis followed by screening for forms with enhanced binding to germline antibodies. To optimize the expression and immunogenicity of the yeast-displayed Env protein, we tested different approaches for cell wall anchoring, expression of gp120 and gp140 Env from different viral strains, the effects of introducing mutations designed to stabilize Env, and the effects of procedures for altering N-linked glycosylation of Env. We find that diverse forms of HIV envelope glycoprotein can be efficiently expressed at the yeast cell surface and that gp140 forms of Env are effectively cleaved by Kex2p, the yeast furin protease homolog. Multiple yeast-displayed gp120 and gp140 proteins are capable of binding to antibodies directed against the V3-variable loop, CD4 binding site, and gp41 membrane-proximal regions, including some antibodies whose binding is known to depend on Env conformation and N-linked glycan. Based on antibody recognition and sensitivity to glycosidases, yeast glycosylation patterns partially mimic high mannose-type N-glycosylation in mammalian cells. However, yeast-displayed Env is not recognized by some anti-Env antibodies sensitive to quaternary structure, suggesting either that the displayed protein exists in a monomeric state or that for these antibodies, yeast glycosylation in certain regions hinders recognition or access. Consistent with studies in other systems, reconstructed predicted unmutated precursors to anti-Env antibodies exhibit little affinity for the yeast-displayed envelope protein.

Structure-Based Reverse Vaccinology Failed in the Case of HIV Because it Disregarded Accepted Immunological Theory

Two types of reverse vaccinology (RV) should be distinguished: genome-based RV for bacterial vaccines and structure-based RV for viral vaccines. Structure-based RV consists in trying to generate a vaccine by first determining the crystallographic structure of a complex between a viral epitope and a neutralizing monoclonal antibody (nMab) and then reconstructing the epitope by reverse molecular engineering outside the context of the native viral protein. It is based on the unwarranted assumption that the epitope designed to fit the nMab will have acquired the immunogenic capacity to elicit a polyclonal antibody response with the same protective capacity as the nMab. After more than a decade of intensive research using this type of RV, this approach has failed to deliver an effective, preventive HIV-1 vaccine. The structure and dynamics of different types of HIV-1 epitopes and of paratopes are described. The rational design of an anti-HIV-1 vaccine is shown to be a misnomer since investigators who claim that they design a vaccine are actually only improving the antigenic binding capacity of one epitope with respect to only one paratope and not the immunogenic capacity of an epitope to elicit neutralizing antibodies. Because of the degeneracy of the immune system and the polyspecificity of antibodies, each epitope studied by the structure-based RV procedure is only one of the many epitopes that the particular nMab is able to recognize and there is no reason to assume that this nMab must have been elicited by this one epitope of known structure. Recent evidence is presented that the trimeric Env spikes of the virus possess such an enormous plasticity and intrinsic structural flexibility that it is it extremely difficult to determine which Env regions are the best candidate vaccine immunogens most likely to elicit protective antibodies.

Identification of Peptide Mimics of a Glycan Epitope on the Surface of Parasitic Nematode Larvae

Phage display was used to identify peptide mimics of an immunologically protective nematode glycan (CarLA) by screening a constrained C7C peptide library for ligands that bound to an anti-CarLA mAb (PAB1). Characterisation of these peptide mimotopes revealed functional similarities with an epitope that is defined by PAB1. Mimotope vaccinations of mice with three selected individual phage clones facilitated the induction of antibody responses that recognised the purified, native CarLA molecule which was obtained from Trichostrongylus colubriformis. Furthermore, these mimotopes are specifically recognised by antibodies in the saliva of animals that were immune to natural polygeneric nematode challenge. This shows that antibodies to the PAB1 epitope form part of the mucosal polyclonal anti-CarLA antibody response of nematode immune host animals. This demonstrates that the selected peptide mimotopes are of biological relevance. These peptides are the first to mimic the PAB1 epitope of CarLA, a defined larval glycan epitope which is conserved between many nematode species.

A recombinant adenovirus-based vector elicits a specific humoral immune response against the V3 loop of HIV-1 gp120 in mice through the "Antigen Capsid-Incorporation" strategy

Background

Due to potential advantages, human adenoviral vectors have been evaluated pre-clinically as recombinant vaccine vectors against several cancers and infectious diseases, including human immunodeficiency virus (HIV) infection. The V3 loop of HIV-1 glycoprotein 120 (gp120) contains important neutralizing epitopes and plays key roles in HIV entry and infectivity.

Methods

In order to investigate the humoral immune response development against portions of the V3 loop, we sought to generate four versions of adenovirus (Ad)-based V3 vectors by incorporating four different antigen inserts into the hypervariable region 1 (HVR1) of human adenovirus type 5 (hAd5) hexon. The strategy whereby antigens are incorporated within the adenovirus capsid is known as the “Antigen Capsid-Incorporation” strategy.

Results

Of the four recombinant vectors, Ad-HVR1-lgs-His₆-V3 and Ad-HVR1-long-V3 had the capability to present heterologous antigens on capsid surface, while maintaining low viral particle to infectious particle (VP/IP) ratios. The VP/IP ratios indicated both high viability and stability of these two vectors, as well as the possibility that V3 epitopes on these two vectors could be presented to immune system. Furthermore, both Ad-HVR1-lgs-His₆-V3 and Ad-HVR1-long-V3 could, to some extent escape the neutralization by anti-adenovirus polyclonal antibody (PAb), but rather not the immunity by anti-gp120 (902) monoclonal antibody (MAb). The neutralization assay together with the whole virus enzyme-linked immunosorbent assay (ELISA) suggested that these two vectors could present V3 epitopes similar to the natural V3 presence in native HIV virions. However, subsequent mice immunizations clearly showed that only Ad-HVR1-lgs-His₆-V3 elicited strong humoral immune response against V3. Isotype ELISAs identified IgG2a and IgG2b as the dominant IgG isotypes, while IgG1 comprised the minority.

Conclusions

Our findings demonstrated that human adenovirus (hAd) vectors which present HIV antigen via the “Antigen Capsid-Incorporation” strategy could successfully elicit antigen-specific humoral immune responses, which could potentially open an avenue for the development of Ad-based HIV V3 vaccines.

Protein engineering strategies for the development of viral vaccines and immunotherapeutics

Vaccines that elicit a protective broadly neutralizing antibody (bNAb) response and monoclonal antibody therapies are critical for the treatment and prevention of viral infections. However, isolation of protective neutralizing antibodies has been challenging for some viruses, notably those with high antigenic diversity or those that do not elicit a bNAb response in the course of natural infection. Here, we discuss recent work that employs protein engineering strategies to design immunogens that elicit bNAbs or engineer novel bNAbs. We highlight the use of rational, computational, and combinatorial strategies and assess the potential of these approaches for the development of new vaccines and immunotherapeutics.

Max Bergmann lecture protein epitope mimetics in the age of structural vaccinology

This review highlights the growing importance of protein epitope mimetics in the discovery of new biologically active molecules and their potential applications in drug and vaccine research. The focus is on folded β-hairpin mimetics, which are designed to mimic β-hairpin motifs in biologically important peptides and proteins. An ever-growing number of protein crystal structures reveal how β-hairpin motifs often play key roles in protein-protein and protein-nucleic acid interactions. This review illustrates how using protein structures as a starting point for small-molecule mimetic design can provide novel ligands as protein-protein interaction inhibitors, as protease inhibitors, and as ligands for chemokine receptors and folded RNA targets, as well as novel antibiotics to combat the growing health threat posed by the emergence of antibiotic-resistant bacteria. The β-hairpin antibiotics are shown to target a β-barrel outer membrane protein (LptD) in Pseudomonas sp., which is essential for the biogenesis of the outer cell membrane. Another exciting prospect is that protein epitope mimetics will be of increasing importance in synthetic vaccine design, in the emerging field of structural vaccinology. Crystal structures of protective antibodies bound to their pathogen-derived epitopes provide an ideal starting point for the design of synthetic epitope mimetics. The mimetics can be delivered to the immune system in a highly immunogenic format on the surface of synthetic virus-like particles. The scientific challenges in molecular design remain great, but the potential significance of success in this area is even greater.

HIV-1 V3 loop crown epitope-focused mimotope selection by patient serum from random phage display libraries: implications for the epitope structural features

The crown region of the V3 loop in HIV-1 that contains the conserved amino acid sequence GPGR/G is known as the principal neutralizing determinant due to the extraordinary ability of antibodies to this region to neutralize the virus. To complement the existing peptide models of this epitope, we describe a family of 18 phage-displayed peptides, which include linear 12mer and constrained 7mer peptides that was selected by screening random libraries with serum from HIV-1 subtype B-infected patients. The 7mer constrained peptides presented two conserved amino acid sequences: PR-L in N-terminus and GPG in the C-terminus. On the basis of these peptides we propose a mimotope model of the V3 crown epitope in which the PR-L and GPG sequences represent the two known epitope binding sites. The GPG, has the same function as the V3 crown GPGR sequence but without the involvement of the "R" despite its being considered as the signature of the epitope in B-subtype viruses. The PR-L contains a proline not existing in the epitope that is postulated to induce kinks in the backbones of all peptides and create a spatial element mimicking the N-terminal conformationally variable binding site. Rabbit serum to these mimotopes recognized the V3 peptides and moderately decreased the fusion between HIV-1 Env- and CD4-expressing Jurkat cells. This study proposes the efficient generation by means of patient sera of V3 epitope mimics validated by interaction with the antibodies to contemporary viruses induced in patients. The serum antibody-selectable mimotopes are sources of novel information on the fine structure-function properties of HIV-1 principal neutralizing domain and candidate anti-HIV-1 immunogens.

Survey of the 2009 commercial optical biosensor literature

We took a different approach to reviewing the commercial biosensor literature this year by inviting 22 biosensor users to serve as a review committee. They set the criteria for what to expect in a publication and ultimately decided to use a pass/fail system for selecting which papers to include in this year's reference list. Of the 1514 publications in 2009 that reported using commercially available optical biosensor technology, only 20% passed their cutoff. The most common criticism the reviewers had with the literature was that "the biosensor experiments could have been done better." They selected 10 papers to highlight good experimental technique, data presentation, and unique applications of the technology. This communal review process was educational for everyone involved and one we will not soon forget.

Limitations to the structure-based design of HIV-1 vaccine immunogens

In spite of 25 years of intensive research, no effective human immunodeficiency virus type 1 (HIV-1) vaccine has yet been developed. One reason for this is that investigators have concentrated mainly on the structural analysis of HIV-1 antigens because they assumed that it should be possible to deduce vaccine-relevant immunogens from the structure of viral antigens bound to neutralizing monoclonal antibodies. This unwarranted assumption arises from misconceptions regarding the nature of protein epitopes and from the belief that it is justified to extrapolate from the antigenicity to the immunogenicity of proteins. Although the structure of the major HIV-1 antigenic sites has been elucidated, this knowledge has been of little use for designing an HIV-1 vaccine. Little attention has been given to the fact that protective immune responses tend to be polyclonal and involve antibodies directed to several different epitopes. It is concluded that only trial and error, empirical investigations using numerous immunization protocols may eventually allow us to identify which mixtures of immunogens are likely to be the best candidates for an HIV-1 vaccine.

Structure-based design of a protein immunogen that displays an HIV-1 gp41 neutralizing epitope

Antibody Z13e1 is a relatively broadly neutralizing anti-human immunodeficiency virus type 1 antibody that recognizes the membrane-proximal external region (MPER) of the human immunodeficiency virus type 1 envelope glycoprotein gp41. Based on the crystal structure of an MPER epitope peptide in complex with Z13e1 Fab, we identified an unrelated protein, interleukin (IL)-22, with a surface-exposed region that is structurally homologous in its backbone to the gp41 Z13e1 epitope. By grafting the gp41 Z13e1 epitope sequence onto the structurally homologous region in IL-22, we engineered a novel protein (Z13-IL22-2) that contains the MPER epitope sequence for use as a potential immunogen and as a reagent for the detection of Z13e1-like antibodies. The Z13-IL22-2 protein binds Fab Z13e1 with a K(d) of 73 nM. The crystal structure of Z13-IL22-2 in complex with Fab Z13e1 shows that the epitope region is faithfully replicated in the Fab-bound scaffold protein; however, isothermal calorimetry studies indicate that Fab binding to Z13-IL22-2 is not a lock-and-key event, leaving open the question of whether conformational changes upon binding occur in the Fab, in Z13-IL-22, or in both.

Synthetic virus-like particles and conformationally constrained peptidomimetics in vaccine design

Conformationally constrained peptidomimetics could be of great value in the design of vaccines targeting protective epitopes on viral and bacterial pathogens. But the poor immunogenicity of small synthetic molecules represents a serious obstacle for their use in vaccine development. Here, we show how a constrained epitope mimetic can be rendered highly immunogenic through multivalent display on the surface of synthetic virus-like nanoparticles. The target epitope is the V3 loop from the gp120 glycoprotein of HIV-1 bound to the neutralizing antibody F425-B4e8. The antibody-bound V3 loop adopts a β-hairpin conformation, which is effectively stabilized by transplantation onto a D-Pro-L-Pro template. The resulting mimetic after coupling to synthetic virus-like particles elicited antibodies in rabbits that recognized recombinant gp120. The elicited antibodies also blocked infection by the neutralization sensitive tier-1 strain MN of HIV-1, as well as engineered viruses with the V1V2 loop deleted; this result is consistent with screening of V3 by the V1V2 loop in intact trimeric viral gp120 spikes. The results provide new insights into HIV-1 vaccine design based on the V3 loop, and illustrate how knowledge from structural biology can be exploited for the design of constrained epitope mimetics, which can be delivered to the immune system by using a highly immunogenic synthetic nanoparticle delivery system.

Requirements for empirical immunogenicity trials, rather than structure-based design, for developing an effective HIV vaccine

The claim that it is possible to rationally design a structure-based HIV-1 vaccine is based on misconceptions regarding the nature of protein epitopes and of immunological specificity. Attempts to use reverse vaccinology to generate an HIV-1 vaccine on the basis of the structure of viral epitopes bound to monoclonal neutralizing antibodies have failed so far because it was not possible to extrapolate from an observed antigenic structure to the immunogenic structure required in a vaccine. Vaccine immunogenicity depends on numerous extrinsic factors such as the host immunoglobulin gene repertoire, the presence of various cellular and regulatory mechanisms in the immunized host and the process of antibody affinity maturation. All these factors played a role in the appearance of the neutralizing antibody used to select the epitope to be investigated as potential vaccine immunogen, but they cannot be expected to be present in identical form in the host to be vaccinated. It is possible to rationally design and optimize an epitope to fit one particular antibody molecule or to improve the paratope binding efficacy of a monoclonal antibody intended for passive immunotherapy. What is not possible is to rationally design an HIV-1 vaccine immunogen that will elicit a protective polyclonal antibody response of predetermined efficacy. An effective vaccine immunogen can only be discovered by investigating experimentally the immunogenicity of a candidate molecule and demonstrating its ability to induce a protective immune response. It cannot be discovered by determining which epitopes of an engineered antigen molecule are recognized by a neutralizing monoclonal antibody. This means that empirical immunogenicity trials rather than structural analyses of antigens offer the best hope of discovering an HIV-1 vaccine.

Surface plasmon resonance for vaccine design and efficacy studies: recent applications and future trends

The lack of a clear correlation between design and protection continues to present a barrier to progress in vaccine research. In this article, we outline how surface plasmon resonance (SPR) biosensors are emerging as tools to help resolve some of the key biophysical determinants of protection and, thereby, facilitate more rational vaccine design campaigns. SPR technology has contributed significantly to our understanding of the complex biophysical determinants of HIV neutralization and offers a platform for preclinical evaluation of vaccine candidates. In particular, the concept of reverse-engineering HIV vaccine targets based on known broadly neutralizing antibody modalities is explored and extended to include other infectious diseases, such as malaria and influenza, and other diseases such as cancer. The analytical capacity afforded by SPR includes serum screening to monitor immune responses and highly efficient quality-control surveillance measures. These are discussed alongside key technological advances, such as developments in sample throughput, and a perspective predicting continued growth and diversification of the role of SPR in vaccine development is proposed.

An optimally constrained V3 peptide is a better immunogen than its linear homolog or HIV-1 gp120

Synthetic peptides offer an attractive option for development of a V3-directed vaccine. However, immunization with flexible linear peptides may result in an immune response to multiple conformations, many of which differ from the native conformation of the corresponding region in the protein. Here we show that optimization of the location of a disulfide bond in peptides constrained to mimic the beta-hairpin conformation of the V3, yields an immunogen that elicits a 30-fold stronger HIV-1 neutralizing response in rabbits compared with the homologous linear V3 peptide. The HIV-1 neutralizing response elicited by the optimally constrained peptide is also significantly stronger than that elicited by a gp120 construct in which the V3 is exposed. Neutralization of an HIV-1 strain that shares only 72% identity with the immunizing peptide was demonstrated. The most effective immunogen was also able to neutralize primary isolates that are more resistant to neutralization such as SS1196 and 6535.