Characterization of an aldolase-dehydrogenase complex that exhibits substrate channeling in the polychlorinated biphenyls degradation pathway

Crystal structure of L-2-keto-3-deoxyfuconate 4-dehydrogenase reveals a unique binding mode as a α-furanosyl hemiketal of substrates

L-2-Keto-3-deoxyfuconate 4-dehydrogenase (L-KDFDH) catalyzes the NAD+-dependent oxidization of L-2-keto-3-deoxyfuconate (L-KDF) to L-2,4-diketo-3-deoxyfuconate (L-2,4-DKDF) in the non-phosphorylating L-fucose pathway from bacteria, and its substrate was previously considered to be the acyclic α-keto form of L-KDF. On the other hand, BDH2, a mammalian homolog with L-KDFDH, functions as a dehydrogenase for cis-4-hydroxy-L-proline (C4LHyp) with the cyclic structure. We found that L-KDFDH and BDH2 utilize C4LHyp and L-KDF, respectively. Therefore, to elucidate unique substrate specificity at the atomic level, we herein investigated for the first time the crystal structures of L-KDFDH from Herbaspirillum huttiense in the ligand-free, L-KDF and L-2,4-DKDF, D-KDP (D-2-keto-3-deoxypentonate; additional substrate), or L-2,4-DKDF and NADH bound forms. In complexed structures, L-KDF, L-2,4-DKDF, and D-KDP commonly bound as a α-furanosyl hemiketal. Furthermore, L-KDFDH showed no activity for L-KDF and D-KDP analogs without the C5 hydroxyl group, which form only the acyclic α-keto form. The C1 carboxyl and α-anomeric C2 hydroxyl groups and O5 oxygen atom of the substrate (and product) were specifically recognized by Arg148, Arg192, and Arg214. The side chain of Trp252 was important for hydrophobically recognizing the C6 methyl group of L-KDF. This is the first example showing the physiological role of the hemiketal of 2-keto-3-deoxysugar acid.

Genome analysis of a coral-associated bacterial consortium highlights complementary hydrocarbon degradation ability and other beneficial mechanisms for the host

Here we report the oil degradation genetic potential of six oil-degrading bacteria (ODB), previously used as a bioremediation consortium, isolated from the hydrocoral Millepora alcicornis and seawater. The strains were identified as Halomonas sp. (LC_1), Cobetia sp. (LC_6), Pseudoalteromonas shioyasakiensis (LC_2), Halopseudomonas aestusnigri (LC_3), Shewanella algae (LC_4), and Brucella intermedia (LC_5). The taxonomic identification differed from that of the original paper when we used whole genome gene markers instead of just 16S rRNA gene. Genes responsible for the degradation of aromatic hydrocarbons and n-alkanes were found in all genomes, although different (and complementary) steps of the metabolic pathways were unique to each strain. Genes for naphthalene and toluene degradation were found in various strains. We annotated quinate degradation genes in LC_6, while LC_3 and LC_5 presented genes for biosurfactant and rhamnolipid biosynthesis. We also annotated genes related to beneficial mechanisms for corals, such as genes involved in nitrogen and DMSP metabolism, cobalamin biosynthesis and antimicrobial compounds production. Our findings reinforce the importance of using bacterial consortia for bioremediation approaches instead of single strains, due to their complementary genomic arsenals. We also propose a genome-based framework to select complementary ODB that can provide additional benefits to coral health.

Bacterial Hydratases Involved in Steroid Side Chain Degradation Have Distinct Substrate Specificities

Actinobacterial MaoC family enoyl coenzyme A (CoA) hydratases catalyze the addition of water across the double bond of CoA esters during steroid side chain catabolism. We determined that heteromeric MaoC type hydratases, exemplified by ChsH1-ChsH2_Mtb of Mycobacterium tuberculosis and CasM-CasO_Rjost from Rhodococcus jostii RHA1, are specific toward a 3-carbon side chain steroid metabolite, consistent with their roles in the last β-oxidation cycle of steroid side chain degradation. Hydratases containing two fused MaoC domains are responsible for the degradation of longer steroid side chains. These hydratases, encoded in the cholesterol degradation gene clusters of M. tuberculosis and R. jostii RHA1, have broad specificity and were able to catalyze the hydration of the 5-carbon side chain of both cholesterol and bile acid metabolites. Surprisingly, the homologous hydratases from the bile acid degradation pathway have low catalytic efficiencies or no activity toward the 5-carbon side chain bile acid metabolites, cholyl-enoyl-CoA, lithocholyl-enoyl-CoA, and chenodeoxycholyl-enoyl-CoA. Instead, these hydratases preferred a cholate metabolite with oxidized steroid rings and a planar ring structure. Together, the results suggest that ring oxidation occurs prior to side chain degradation in the actinobacterial bile acid degradation pathway. IMPORTANCE Characterization of the substrate specificity of hydratases described here will facilitate the development of specific inhibitors that may be useful as novel therapeutics against M. tuberculosis and to metabolically engineer bacteria to produce steroid pharmaceuticals with desired steroid rings and side chain structures.

Unifying Scheme for the Biosynthesis of Acyl-Branched Sugars: Extended Substrate Scope of Thiamine-Dependent Enzymes

Thiamine diphosphate (ThDP) dependent enzymes are useful catalysts for asymmetric C−C bond formation through benzoin‐type condensation reactions that result in α‐hydroxy ketones. A wide range of aldehydes and ketones can be used as acceptor substrates; however, the donor substrate range is mostly limited to achiral α‐keto acids and simple aldehydes. By using a unifying retro‐biosynthetic approach towards acyl‐branched sugars, we identified a subclass of (myco)bacterial ThDP‐dependent enzymes with a greatly extended donor substrate range, namely functionalized chiral α‐keto acids with a chain length from C₄ to C₈. Highly enantioenriched acyloin products were obtained in good to high yields and several reactions were performed on a preparative scale. The newly introduced functionalized α‐keto acids, accessible by known aldolase‐catalyzed transformations, substantially broaden the donor substrate range of ThDP‐dependent enzymes, thus enabling a more general use of these already valuable catalysts.

Challenges Associated With the Formation of Recombinant Protein Inclusion Bodies in Escherichia coli and Strategies to Address Them for Industrial Applications

Recombinant proteins are becoming increasingly important for industrial applications, where Escherichia coli is the most widely used bacterial host for their production. However, the formation of inclusion bodies is a frequently encountered challenge for producing soluble and functional recombinant proteins. To overcome this hurdle, different strategies have been developed through adjusting growth conditions, engineering host strains of E. coli, altering expression vectors, and modifying the proteins of interest. These approaches will be comprehensively highlighted with some of the new developments in this review. Additionally, the unique features of protein inclusion bodies, the mechanism and influencing factors of their formation, and their potential advantages will also be discussed.

A Key Glycine in Bacterial Steroid-Degrading Acyl-CoA Dehydrogenases Allows Flavin-Ring Repositioning and Modulates Substrate Side Chain Specificity

A wide variety of steroid metabolites synthesized by eukaryotes are all ultimately catabolized by bacteria; while generally saprophytic, pathogenic Mycobacteria have repurposed these pathways to utilize host intracellular cholesterol pools. Steroid degradation is complex, but a recurring theme is that cycles of β-oxidation are used to iteratively remove acetyl- or propanoyl-CoA groups. These β-oxidation cycles are initiated by the FAD-dependent oxidation of acyl groups, catalyzed by acyl-CoA dehydrogenases (ACADs). We show here that the tcur3481 and tcur3483 genes of Thermomonospora curvata encode subunits of a single ACAD that degrades steroid side chains with a preference for three-carbon over five-carbon substituents. The structure confirms that this enzyme is heterotetrameric, with active sites only in the Tcur3483 subunits. In comparison with the steroid ACAD FadE26-FadE27 from Mycobacterium tuberculosis, the active site is narrower and closed at the steroid-binding end, suggesting that Tcur3481-Tcur3483 is in a catalytically productive state, while FadE26-FadE27 is opened up to allow substrate entry. The flavin rings in Tcur3481-Tcur3483 sit in an unusual pocket created by Gly363, a residue conserved as Ala in steroid ACADs narrowly specific for five-carbon side chains, including FadE34. A Gly363Ala variant of Tcur3481-Tcur3483 prefers five-carbon side chains, while an inverse Ala691Gly FadE34 variant enables three-carbon side chain steroid oxidation. We determined the structure of the Tcur3483 Gly363Ala variant, showing that the flavin rings shift into the more conventional position. Modeling suggests that the shifted flavin position made possible by Gly363 is required to allow the bulky, inflexible three-carbon steroid to bind productively in the active site.

Challenges of ligand identification for the second wave of orphan riboswitch candidates

Orphan riboswitch candidates are noncoding RNA motifs whose representatives are believed to function as genetic regulatory elements, but whose target ligands have yet to be identified. The study of certain orphans, particularly classes that have resisted experimental validation for many years, has led to the discovery of important biological pathways and processes once their ligands were identified. Previously, we highlighted details for four of the most common and intriguing orphan riboswitch candidates. This facilitated the validation of riboswitches for the signaling molecules c-di-AMP, ZTP, and ppGpp, the metal ion Mn2+, and the metabolites guanidine and PRPP. Such studies also yield useful linkages between the ligands sensed by the riboswitches and numerous biochemical pathways. In the current report, we describe the known characteristics of 30 distinct classes of orphan riboswitch candidates - some of which have remained unsolved for over a decade. We also discuss the prospects for uncovering novel biological insights via focused studies on these RNAs. Lastly, we make recommendations for experimental objectives along the path to finding ligands for these mysterious RNAs.

Nucleophile Promiscuity of Engineered Class II Pyruvate Aldolase YfaU from E. Coli

Pyruvate-dependent aldolases exhibit a stringent selectivity for pyruvate, limiting application of their synthetic potential, which is a drawback shared with other existing aldolases. Structure-guided rational protein engineering rendered a 2-keto-3-deoxy-l-rhamnonate aldolase variant, fused with a maltose-binding protein (MBP-YfaU W23V/L216A), capable of efficiently converting larger pyruvate analogues, for example, those with linear and branched aliphatic chains, in aldol addition reactions. Combination of these nucleophiles with N-Cbz-alaninal (Cbz=benzyloxycarbonyl) and N-Cbz-prolinal electrophiles gave access to chiral building blocks, for example, derivatives of (2S,3S,4R)-4-amino-3-hydroxy-2-methylpentanoic acid (68 %, d.r. 90:10) and the enantiomer of dolaproine (33 %, d.r. 94:6) as well as a collection of unprecedented α-amino acid derivatives of the proline and pyrrolizidine type. Conversions varied between 6-93 % and diastereomeric ratios from 50:50 to 95:5 depending on the nucleophilic and electrophilic components.

Characterization of an Aldolase Involved in Cholesterol Side Chain Degradation in Mycobacterium tuberculosis

The heteromeric acyl coenzyme A (acyl-CoA) dehydrogenase FadE28-FadE29 and the enoyl-CoA hydratase ChsH1-ChsH2, encoded by genes within the intracellular growth (igr) operon of Mycobacterium tuberculosis, catalyze the dehydrogenation of the cholesterol metabolite 3-oxo-4-pregnene-20-carboxyl-CoA (3-OPC-CoA), with a 3-carbon side chain, and subsequent hydration of the product 3-oxo-4,17-pregnadiene-20-carboxyl-CoA (3-OPDC-CoA) to form 17-hydroxy-3-oxo-4-pregnene-20-carboxyl-CoA (17-HOPC-CoA). The gene downstream of chsH2, i.e., ltp2, was expressed in recombinant Rhodococcus jostii RHA1 in combination with other genes within the igr operon. His-tagged Ltp2 copurified with untagged ChsH1-ChsH2, ChsH2, or the C-terminal domain of ChsH2, which contains a domain of unknown function (DUF35). Ltp2 in association with ChsH1-ChsH2 or just the DUF35 domain of ChsH2 was shown to catalyze the retroaldol cleavage of 17-HOPC-CoA to form androst-4-ene-3,17-dione and propionyl-CoA. Steady-state kinetic analysis using the Ltp2-DUF35 complex showed that the aldolase had optimal activity at pH 7.5, with a K_m of 6.54 ± 0.90 μM and a k_cat of 159 ± 8.50 s^-1 ChsH1-ChsH2 could hydrate only about 30% of 3-OPDC-CoA, but this unfavorable equilibrium could be overcome when the aldolase was present to remove the hydrated product, providing a rationale for the close association of the aldolase with the hydratase. Homologs of ChsH1, ChsH2, and Ltp2 are found in steroid-degrading Gram-positive and Gram-negative bacteria, suggesting that side chains of diverse steroids may be cleaved by aldolases in the bacteria.IMPORTANCE The C-C bond cleavage of the D-ring side chain of cholesterol was shown to be catalyzed by an aldolase. The aldolase associates with the hydratase that catalyzes the preceding reaction in the cholesterol side chain degradation pathway. These enzymes are encoded by genes within the intracellular growth (igr) operon of M. tuberculosis, and the operon was demonstrated previously to be linked to the pathogenicity and persistence of the bacteria in macrophages and in mice.

Investigation into the Mode of Phosphate Activation in the 4-Hydroxy-4-Methyl-2-Oxoglutarate/4-Carboxy-4-Hydroxy-2-Oxoadipate Aldolase from Pseudomonas putida F1

The 4-hydroxy-4-methyl-2-oxoglutarate (HMG)/4-carboxy-4-hydroxy-2-oxoadipate (CHA) aldolase is the last enzyme of both the gallate and protocatechuate 4,5-cleavage pathways which links aromatic catabolism to central cellular metabolism. The enzyme is a class II, divalent metal dependent, aldolase which is activated in the presence of inorganic phosphate (Pi), increasing its turnover rate >10-fold. This phosphate activation is unique for a class II aldolase. The aldolase pyruvate methyl proton exchange rate, a probe of the general acid half reaction, was increased 300-fold in the presence of 1 mM Pi and the rate enhancement followed saturation kinetics giving rise to a KM of 397 ± 30 μM. Docking studies revealed a potential Pi binding site close to, or overlapping with, the proposed general acid water site. Putative Pi binding residues were substituted by site-directed mutagenesis which resulted in reductions of Pi activation. Significantly, the active site residue Arg-123, known to be critical for the catalytic mechanism of the enzyme, was also implicated in supporting Pi mediated activation.

Stereochemical Consequences of Vinylpyruvate Hydratase-Catalyzed Reactions

A stereochemical analysis has been carried out on two vinylpyruvate hydratases (VPH), which convert 2-hydroxy-2,4-pentadienoate to 2-keto-4S-hydroxypentanoate in meta-fission pathways. Bacterial strains with this pathway can use aromatic compounds as sole sources of energy and carbon. The analysis was carried out using the 5-methyl and 5-chloro derivatives of 2-hydroxy-2,4-pentadienoate with the enzymes from Pseudomonas putida mt-2 (Pp) and Leptothrix cholodnii SP-6 (Lc). In both organisms, VPH is in a complex with the preceding enzyme in the pathway, 4-oxalocrotonate decarboxylase (4-OD). In D2O, a deuteron is incorporated stereospecifically at the C-3 and C-5 positions of product by both Pp and Lc enzymes. Accordingly, the complexes generate (3S,5S)-3,5-[di-D]-2-keto-4S-hydroxyhexanoate and (3S,5R)-3,5-[di-D]-2-keto-4R-hydroxy-5-chloropentanoate (4R and 5R due to a priority numbering change). The substitution at C-5 (CH3 or Cl) or the source of the enzyme (Pp or Lc) does not change the stereochemical outcome. One mechanism that can account for the results is the ketonization of the 5-substituted dienol to the α,β-unsaturated ketone (placing a deuteron at C-5 in D2O), followed by the conjugate addition of water (placing a deuteron at C-3). The stereochemical outcome for VPH (from Pp and Lc) is the same as that reported for a related enzyme, 2-oxo-hept-4-ene-1,7-dioate hydratase, from Escherichia coli C. The combined observations suggest similar mechanisms for these three enzymes that could possibly be common to this group of enzymes.

Building Bridges: Biocatalytic C-C-Bond Formation toward Multifunctional Products

Carbon-carbon bond formation is the key reaction for organic synthesis to construct the carbon framework of organic molecules. The review gives a selection of biocatalytic C-C-bond-forming reactions which have been investigated during the last 5 years and which have already been proven to be applicable for organic synthesis. In most cases, the reactions lead to products functionalized at the site of C-C-bond formation (e.g., α-hydroxy ketones, aminoalcohols, diols, 1,4-diketones, etc.) or allow to decorate aromatic and heteroaromatic molecules. Furthermore, examples for cyclization of (non)natural precursors leading to saturated carbocycles are given as well as the stereoselective cyclopropanation of olefins affording cyclopropanes. Although many tools are already available, recent research also makes it clear that nature provides an even broader set of enzymes to perform specific C-C coupling reactions. The possibilities are without limit; however, a big library of variants for different types of reactions is required to have the specific enzyme for a desired specific (stereoselective) reaction at hand.

The application of reaction engineering to biocatalysis

Biocatalysis is a growing area of synthetic and process chemistry with the ability to deliver not only improved processes for the synthesis of existing compounds, but also new routes to new compounds.

Characterization of novel acyl coenzyme A dehydrogenases involved in bacterial steroid degradation

The acyl coenzyme A (acyl-CoA) dehydrogenases (ACADs) FadE34 and CasC, encoded by the cholesterol and cholate gene clusters of Mycobacterium tuberculosis and Rhodococcus jostii RHA1, respectively, were successfully purified. Both enzymes differ from previously characterized ACADs in that they contain two fused acyl-CoA dehydrogenase domains in a single polypeptide. Site-specific mutagenesis showed that only the C-terminal ACAD domain contains the catalytic glutamate base required for enzyme activity, while the N-terminal ACAD domain contains an arginine required for ionic interactions with the pyrophosphate of the flavin adenine dinucleotide (FAD) cofactor. Therefore, the two ACAD domains must associate to form a single active site. FadE34 and CasC were not active toward the 3-carbon side chain steroid metabolite 3-oxo-23,24-bisnorchol-4-en-22-oyl-CoA (4BNC-CoA) but were active toward steroid CoA esters containing 5-carbon side chains. CasC has similar specificity constants for cholyl-CoA, deoxycholyl-CoA, and 3β-hydroxy-5-cholen-24-oyl-CoA, while FadE34 has a preference for the last compound, which has a ring structure similar to that of cholesterol metabolites. Knockout of the casC gene in R. jostii RHA1 resulted in a reduced growth on cholate as a sole carbon source and accumulation of a 5-carbon side chain cholate metabolite. FadE34 and CasC represent unique members of ACADs with primary structures and substrate specificities that are distinct from those of previously characterized ACADs.

IMPORTANCE

We report here the identification and characterization of acyl-CoA dehydrogenases (ACADs) involved in the metabolism of 5-carbon side chains of cholesterol and cholate. The two homologous enzymes FadE34 and CasC, from M. tuberculosis and Rhodococcus jostii RHA1, respectively, contain two ACAD domains per polypeptide, and we show that these two domains interact to form a single active site. FadE34 and CasC are therefore representatives of a new class of ACADs with unique primary and quaternary structures. The bacterial steroid degradation pathway is important for the removal of steroid waste in the environment and for survival of the pathogen M. tuberculosis within host macrophages. FadE34 is a potential target for development of new antibiotics against tuberculosis.

Binding and channeling of alternative substrates in the enzyme DmpFG: a molecular dynamics study

DmpFG is a bifunctional enzyme comprised of an aldolase subunit, DmpG, and a dehydrogenase subunit, DmpF. The aldehyde intermediate produced by the aldolase is channeled directly through a buried molecular channel in the protein structure from the aldolase to the dehydrogenase active site. In this study, we have investigated the binding of a series of progressively larger substrates to the aldolase, DmpG, using molecular dynamics. All substrates investigated are easily accommodated within the active site, binding with free energy values comparable to the physiological substrate 4-hydroxy-2-ketovalerate. Subsequently, umbrella sampling was utilized to obtain free energy surfaces for the aldehyde intermediates (which would be generated from the aldolase reaction on each of these substrates) to move through the channel to the dehydrogenase DmpF. Small substrates were channeled with limited barriers in an energetically feasible process. We show that the barriers preventing bulky intermediates such as benzaldehyde from moving through the wild-type protein can be removed by selective mutation of channel-lining residues, demonstrating the potential for tailoring this enzyme to allow its use for the synthesis of specific chemical products. Furthermore, positions of transient escape routes in this flexible channel were determined.

Biochemical and structural analysis of RraA proteins to decipher their relationships with 4-hydroxy-4-methyl-2-oxoglutarate/4-carboxy-4-hydroxy-2-oxoadipate aldolases

4-Hydroxy-4-methyl-2-oxoglutarate (HMG)/4-carboxy-4-hydroxy-2-oxoadipate (CHA) aldolases are class II (divalent metal ion dependent) pyruvate aldolases from the meta cleavage pathways of protocatechuate and gallate. The enzyme from Pseudomonas putida F1 is structurally similar to a group of proteins termed regulators of RNase E activity A (RraA) that bind to the regulatory domain of RNase E and inhibit the ribonuclease activity in certain bacteria. Analysis of homologous RraA-like proteins from varying species revealed that they share sequence conservation within the active site of HMG/CHA aldolase. In particular, the P. putida F1 HMG/CHA aldolase has a D-X20-R-D motif, whereas a G-X20-R-D-X2-E/D motif is observed in the structures of the RraA-like proteins from Thermus thermophilus HB8 (TtRraA) and Saccharomyces cerevisiae S288C (Yer010Cp) that may support metal binding. TtRraA and Yer010Cp were found to contain HMG aldolase and oxaloacetate decarboxylase activities. Similar to the P. putida F1 HMG/CHA aldolase, both TtRraA and Yer010Cp enzymes required divalent metal ions for activity and were competitively inhibited by oxalate, a pyruvate enolate analogue, suggesting a common mechanism among the enzymes. The RraA from Escherichia coli (EcRraA) lacked detectable C-C lyase activity. Upon restoration of the G-X20-R-D-X2-E/D motif, by site-specific mutagenesis, the EcRraA variant was able to catalyze oxaloacetate decarboxylation. Sequence analysis of RraA-like gene products found across all the domains of life revealed conservation of the metal binding motifs that can likely support a divalent metal ion-dependent enzyme reaction either in addition to or in place of the putative RraA function.

Mechanism of the dehydrogenase reaction of DmpFG and analysis of inter-subunit channeling efficiency and thermodynamic parameters in the overall reaction

The bifunctional, microbial enzyme DmpFG is comprised of two subunits: the aldolase, DmpG, and the dehydrogenase, DmpF. DmpFG is of interest due to its ability to channel substrates between the two spatially distinct active sites. While the aldolase is well studied, significantly less is known about the dehydrogenase. Steady-state kinetic measurements of the reverse reaction of DmpF confirmed that the dehydrogenase uses a ping-pong mechanism, with substrate inhibition by acetyl CoA indicating that NAD(+)/NADH and CoA/acetyl CoA bind to the same site in DmpF. The Km of DmpF for exogenous acetaldehyde as a substrate was 23.7 mM, demonstrating the necessity for the channel to deliver acetaldehyde directly from the aldolase to the dehydrogenase active site. A channeling assay on the bifunctional enzyme gave an efficiency of 93% indicating that less than 10% of the toxic acetaldehyde leaks out of the channel into the bulk media, prior to reaching the dehydrogenase active site. The thermodynamic activation parameters of the reactions catalyzed by the aldolase, the dehydrogenase and the DmpFG complex were determined. The Gibb's free energy of activation for the dehydrogenase reaction was lower than that obtained for the full DmpFG reaction, in agreement with the high kcat obtained for the dehydrogenase reaction in isolation. Furthermore, although both the DmpF and DmpG reactions occur with small, favorable entropies of activation, the full DmpFG reaction occurs with a negative entropy of activation. This supports the concept of allosteric structural communication between the two enzymes to coordinate their activities.

Characterization of an aldolase-dehydrogenase complex from the cholesterol degradation pathway of Mycobacterium tuberculosis

HsaF and HsaG are an aldolase and dehydrogenase from the cholesterol degradation pathway of Mycobacterium tuberculosis. HsaF could be heterologously expressed and purified as a soluble dimer, but the enzyme was inactive in the absence of HsaG. HsaF catalyzes the aldol cleavage of 4-hydroxy-2-oxoacids to produce pyruvate and an aldehyde. The enzyme requires divalent metals for activity, with a preference for Mn(2+). The Km values for 4-hydroxy-2-oxoacids were about 20-fold lower than observed for the aldolase homologue, BphI from the polychlorinated biphenyl degradation pathway. Acetaldehyde and propionaldehyde were channeled directly to the dehydrogenase, HsaG, without export to the bulk solvent where they were transformed to acyl-CoA in an NAD(+) and coenzyme A dependent reaction. HsaG is able to utilize aldehydes up to five carbons in length as substrates, with similar catalytic efficiencies. The HsaF-HsaG complex was crystallized and its structure was determined to a resolution of 1.93 Å. Substitution of serine 41 in HsaG with isoleucine or aspartate resulted in about 35-fold increase in Km for CoA but only 4-fold increase in Km dephospho-CoA, suggesting that this residue interacts with the 3'-ribose phosphate of CoA. A second protein annotated as a 4-hydroxy-2-oxopentanoic acid aldolase in M. tuberculosis (MhpE, Rv3469c) was expressed and purified, but was found to lack aldolase activity. Instead this enzyme was found to possess oxaloacetate decarboxylase activity, consistent with the conservation (with the 4-hydroxy-2-oxoacid aldolases) of residues involved in pyruvate enolate stabilization.

Rational approaches for engineering novel functionalities in carbon-carbon bond forming enzymes

Enzymes that catalyze carbon-carbon bond formation can be exploited as biocatalyst for synthetic organic chemistry. However, natural enzymes frequently do not possess the required properties or specificities to catalyze industrially useful transformations. This mini-review describes recent work using knowledge-guided site-specific mutagenesis of key active site residues to alter substrate specificity, stereospecificity and reaction specificity of these enzymes. In addition, examples of de novo designed enzymes that catalyze C-C bond reactions not found in nature will be discussed.

Deepening TOL and TOU catabolic pathways of Pseudomonas sp. OX1: cloning, sequencing and characterization of the lower pathways

Pseudomonas sp. OX1 is able to metabolize toluene and o-xylene through the TOU catabolic pathway, whereas its mutant M1 strain was found to be able to use m- and p-xylene as carbon and energy source, using the TOL catabolic pathway. Here we report the complete nucleotide sequence of the phe lower operon of the TOU catabolic pathway, and the sequence of the last four genes of the xyl-like lower operon of the TOL catabolic pathway. DNA sequence analysis shows the gene order within the operons to be pheCDEFGHI (phe operon) and xyl-likeQKIH (xyl-like operon), identical to the order found for the isofunctional genes of meta operons in the toluene/xylene pathway of TOL plasmid pWW0 from Pseudomonas putida mt-2 and the phenol/methylphenol pathway of pVIl50 from Pseudomonas sp. CF600. The nucleotide and the deduced amino acid sequences are homologous to the equivalent gene and enzyme sequences from other Pseudomonas meta pathways. Recombinant 2-hydroxymuconic semialdehyde dehydrogenase (HMSD) and 2-hydroxymuconic semialdehyde hydrolase (HMSH), coded by pheCD genes, respectively, and ADA and HOA enzymes from both phe and xyl operons were expressed in E. coli and steady-state kinetic analysis was carried out. The analysis of the kinetic parameters of HMSD and HMSH showed that the enzymes from Pseudomonas sp. OX1 are more specialized to channel metabolites into the two branches of the lower pathway than homologous enzymes from other pseudomonads. The kinetics parameters of recombinant ADA from phe and xyl-like operon were found to be similar to those of homologous enzymes from other Pseudomonas strains. In addition, the enzyme from xyl-like operon showed a substrate affinity three times higher than the enzyme from phe operon.

Substrate specificity, substrate channeling, and allostery in BphJ: an acylating aldehyde dehydrogenase associated with the pyruvate aldolase BphI

BphJ, a nonphosphorylating acylating aldehyde dehydrogenase, catalyzes the conversion of aldehydes to form acyl-coenzyme A in the presence of NAD(+) and coenzyme A (CoA). The enzyme is structurally related to the nonacylating aldehyde dehydrogenases, aspartate-β-semialdehyde dehydrogenase and phosphorylating glyceraldehyde-3-phosphate dehydrogenase. Cys-131 was identified as the catalytic thiol in BphJ, and pH profiles together with site-specific mutagenesis data demonstrated that the catalytic thiol is not activated by an aspartate residue, as previously proposed. In contrast to the wild-type enzyme that had similar specificities for two- or three-carbon aldehydes, an I195A variant was observed to have a 20-fold higher catalytic efficiency for butyraldehyde and pentaldehyde compared to the catalytic efficiency of the wild type toward its natural substrate, acetaldehyde. BphJ forms a heterotetrameric complex with the class II aldolase BphI that channels aldehydes produced in the aldol cleavage reaction to the dehydrogenase via a molecular tunnel. Replacement of Ile-171 and Ile-195 with bulkier amino acid residues resulted in no more than a 35% reduction in acetaldehyde channeling efficiency, showing that these residues are not critical in gating the exit of the channel. Likewise, the replacement of Asn-170 in BphJ with alanine and aspartate did not substantially alter aldehyde channeling efficiencies. Levels of activation of BphI by BphJ N170A, N170D, and I171A were reduced by ≥3-fold in the presence of NADH and ≥4.5-fold when BphJ was undergoing turnover, indicating that allosteric activation of the aldolase has been compromised in these variants. The results demonstrate that the dehydrogenase coordinates the catalytic activity of BphI through allostery rather than through aldehyde channeling.

Protein-protein interactions and substrate channeling in orthologous and chimeric aldolase-dehydrogenase complexes

Bacterial aldolase-dehydrogenase complexes catalyze the last steps in the meta cleavage pathway of aromatic hydrocarbon degradation. The aldolase (TTHB246) and dehydrogenase (TTHB247) from Thermus thermophilus were separately expressed and purified from recombinant Escherichia coli. The aldolase forms a dimer, while the dehydrogenase is a monomer; these enzymes can form a stable tetrameric complex in vitro, consisting of two aldolase and two dehydrogenase subunits. Upon complex formation, the K(m) value of 4-hydroxy-2-oxopentanoate, the substrate of TTHB246, is decreased 4-fold while the K(m) of acetaldehyde, the substrate of TTHB247, is increased 3-fold. The k(cat) values of each enzyme were reduced by ~2-fold when they were in a complex. The half-life of TTHB247 at 50 °C increased by ~4-fold when it was in a complex with TTHB246. The acetaldehyde product from TTHB246 could be efficiently channelled directly to TTHB247, but the channeling efficiency for the larger propionaldehyde was ~40% lower. A single A324G substitution in TTHB246 increased the channeling efficiency of propionaldehyde to a value comparable to that of acetaldehyde. Stable and catalytically competent chimeric complexes could be formed between the T. thermophilus enzymes and the orthologous aldolase (BphI) and dehydrogenase (BphJ) from the biphenyl degradation pathway of Burkholderia xenovorans LB400. However, channeling efficiencies for acetaldehyde in these chimeric complexes were ~10%. Structural and sequence analysis suggests that interacting residues in the interface of the aldolase-dehydrogenase complex are highly conserved among homologues, but coevolution of partner enzymes is required to fine-tune this interaction to allow for efficient substrate channeling.

Biological channeling of a reactive intermediate in the bifunctional enzyme DmpFG

It has been hypothesized that the bifunctional enzyme DmpFG channels its intermediate, acetaldehyde, from one active site to the next using a buried intermolecular channel identified in the crystal structure. This channel appears to switch between an open and a closed conformation depending on whether the coenzyme NAD(+) is present or absent. Here, we applied molecular dynamics and metadynamics to investigate channeling within DmpFG in both the presence and absence of NAD(+). We found that substrate channeling within this enzyme is energetically feasible in the presence of NAD(+) but was less likely in its absence. Tyr-291, a proposed control point at the channel's entry, does not appear to function as a molecular gate. Instead, it is thought to orientate the substrate 4-hydroxy-2-ketovalerate in DmpG before reaction occurs, and may function as a proton shuttle for the DmpG reaction. Three hydrophobic residues at the channel's exit appear to have an important role in controlling the entry of acetaldehyde into the DmpF active site.

Structural and kinetic characterization of 4-hydroxy-4-methyl-2-oxoglutarate/4-carboxy-4-hydroxy-2-oxoadipate aldolase, a protocatechuate degradation enzyme evolutionarily convergent with the HpaI and DmpG pyruvate aldolases

4-Hydroxy-4-methyl-2-oxoglutarate/4-carboxy-4-hydroxy-2-oxoadipate (HMG/CHA) aldolase from Pseudomonas putida F1 catalyzes the last step of the bacterial protocatechuate 4,5-cleavage pathway. The preferred substrates of the enzyme are 2-keto-4-hydroxy acids with a 4-carboxylate substitution. The enzyme also exhibits oxaloacetate decarboxylation and pyruvate α-proton exchange activity. Sodium oxalate is a competitive inhibitor of the aldolase reaction. The pH dependence of k(cat)/K(m) and k(cat) for the enzyme is consistent with a single deprotonation with pK(a) values of 8.0 ± 0.1 and 7.0 ± 0.1 for free enzyme and enzyme substrate complex, respectively. The 1.8 Å x-ray structure shows a four-layered α-β-β-α sandwich structure with the active site at the interface of two adjacent subunits of a hexamer; this fold resembles the RNase E inhibitor, RraA, but is novel for an aldolase. The catalytic site contains a magnesium ion ligated by Asp-124 as well as three water molecules bound by Asp-102 and Glu-199'. A pyruvate molecule binds the magnesium ion through both carboxylate and keto oxygen atoms, completing the octahedral geometry. The carbonyl oxygen also forms hydrogen bonds with the guanadinium group of Arg-123, which site-directed mutagenesis confirms is essential for catalysis. A mechanism for HMG/CHA aldolase is proposed on the basis of the structure, kinetics, and previously established features of other aldolase mechanisms.

Quantitative analysis of cellular metabolic dissipative, self-organized structures

One of the most important goals of the postgenomic era is understanding the metabolic dynamic processes and the functional structures generated by them. Extensive studies during the last three decades have shown that the dissipative self-organization of the functional enzymatic associations, the catalytic reactions produced during the metabolite channeling, the microcompartmentalization of these metabolic processes and the emergence of dissipative networks are the fundamental elements of the dynamical organization of cell metabolism. Here we present an overview of how mathematical models can be used to address the properties of dissipative metabolic structures at different organizational levels, both for individual enzymatic associations and for enzymatic networks. Recent analyses performed with dissipative metabolic networks have shown that unicellular organisms display a singular global enzymatic structure common to all living cellular organisms, which seems to be an intrinsic property of the functional metabolism as a whole. Mathematical models firmly based on experiments and their corresponding computational approaches are needed to fully grasp the molecular mechanisms of metabolic dynamical processes. They are necessary to enable the quantitative and qualitative analysis of the cellular catalytic reactions and also to help comprehend the conditions under which the structural dynamical phenomena and biological rhythms arise. Understanding the molecular mechanisms responsible for the metabolic dissipative structures is crucial for unraveling the dynamics of cellular life.

Comparison of two metal-dependent pyruvate aldolases related by convergent evolution: substrate specificity, kinetic mechanism, and substrate channeling

HpaI and BphI are two pyruvate class II aldolases found in aromatic meta-cleavage degradation pathways that catalyze similar reactions but are not related in sequence. Steady-state kinetic analysis of the aldol addition reactions and product inhibition assays showed that HpaI exhibits a rapid equilibrium random order mechanism while BphI exhibits a compulsory order mechanism, with pyruvate binding first. Both aldolases are able to utilize aldehyde acceptors two to five carbons in length; however, HpaI showed broader specificity and had a preference for aldehydes containing longer linear alkyl chains or C2-OH substitutions. Both enzymes were able to bind 2-keto acids larger than pyruvate, but only HpaI was able to utilize both pyruvate and 2-ketobutanoate as carbonyl donors in the aldol addition reaction. HpaI lacks stereospecific control producing racemic mixtures of 4-hydroxy-2-oxopentanoate (HOPA) from pyruvate and acetaldehyde while BphI synthesizes only (4S)-HOPA. BphI is also able to utilize acetaldehyde produced by the reduction of acetyl-CoA catalyzed by the associated aldehyde dehydrogenase, BphJ. This aldehyde was directly channeled from the dehydrogenase to the aldolase active sites, with an efficiency of 84%. Furthermore, the BphJ reductive deacylation reaction increased 4-fold when BphI was catalyzing the aldol addition reaction. Therefore, the BphI-BphJ enzyme complex exhibits unique bidirectionality in substrate channeling and allosteric activation.