A general method of analysis of ligand binding to competing macromolecules using the spectroscopic signal originating from a reference macromolecule. Application to Escherichia coli replicative helicase DnaB protein nucleic acid interactions

Thermodynamic study of the effect of ions on the interaction between dengue virus NS3 helicase and single stranded RNA

Dengue virus nonstructural protein 3 (NS3) fulfills multiple essential functions during the viral replication and constitutes a prominent drug target. NS3 is composed by a superfamily-2 RNA helicase domain joined to a serine protease domain. Quantitative fluorescence titrations employing a fluorescein-tagged RNA oligonucleotide were used to investigate the effect of salts on the interaction between NS3 and single stranded RNA (ssRNA). We found a strong dependence of the observed equilibrium binding constant, K_obs, with the salt concentration, decreasing at least 7-fold for a 1-fold increase on cation concentration. As a result of the effective neutralization of ~10 phosphate groups, binding of helicase domain of NS3 to ssRNA is accompanied by the release of 5 or 7 monovalent cations from an oligonucleotide or a polynucleotide, respectively and of 3 divalent cations from the same oligonucleotide. Such estimates are not affected by the type of cation, either monovalent (KCl, NaCl and RbCl) or divalent (MgCl₂ and CaCl₂), nor by the presence of the protease domain or the fluorescein label. Combined effect of mono and divalent cations was well described by a simple equilibrium binding model which allows to predict the values of K_obs at any concentration of cations.

Protein Environment and DNA Orientation Affect Protein-Induced Cy3 Fluorescence Enhancement

The cyanine dye Cy3 is a popular fluorophore used to probe the binding of proteins to nucleic acids as well as their conformational transitions. Nucleic acids labeled only with Cy3 can often be used to monitor interactions with unlabeled proteins because of an enhancement of Cy3 fluorescence intensity that results when the protein contacts Cy3, a property sometimes referred to as protein-induced fluorescence enhancement (PIFE). Although Cy3 fluorescence is enhanced upon contacting most proteins, we show here in studies of human replication protein A and Escherichia coli single-stranded DNA binding protein that the magnitude of the Cy3 enhancement is dependent on both the protein as well as the orientation of the protein with respect to the Cy3 label on the DNA. This difference in PIFE is due entirely to differences in the final protein-DNA complex. We also show that the origin of PIFE is the longer fluorescence lifetime induced by the local protein environment. These results indicate that PIFE is not a through space distance-dependent phenomenon but requires a direct interaction of Cy3 with the protein, and the magnitude of the effect is influenced by the region of the protein contacting Cy3. Hence, use of the Cy3 PIFE effect for quantitative studies may require careful calibration.

Signal and binding. I. Physico-chemical response to macromolecule-ligand interactions

Obtaining a detailed knowledge about energetics of ligand-macromolecule interactions is a prerequisite for elucidation of the nature, behavior, and activities of the formed complexes. The most commonly used methods in characterizing molecular interactions are physico-chemical techniques based mainly on spectroscopic, calorimetric, hydrodynamic, etc., measurements. The major advantage of the physico-chemical methods is that they do not require large quantities of material and, if performed carefully, do not perturb examined reactions. Applications of several different physico-chemical approaches, commonly encountered in analyses of biochemical interactions, are here reviewed and discussed, using examples of simple binding reactions. It is stressed that without determination of the relationship between the measured signal and the total average degree of binding, the performed analysis of a single physico-chemical titration curve may provide only fitting parameters, instead of meaningful interaction parameters, already for the binding systems with only two ligand molecules. Some possible pitfalls in the analyses of single titration curves are discussed.

Signal and binding. II. Converting physico-chemical responses to macromolecule-ligand interactions into thermodynamic binding isotherms

Physico-chemical titration techniques are the most commonly used methods in characterizing molecular interactions. These methods are mainly based on spectroscopic, calorimetric, hydrodynamic, etc., measurements. However, truly quantitative physico-chemical methods are absolutely based on the determination of the relationship between the measured signal and the total average degree of binding in order to obtain meaningful interaction parameters. The relationship between the observed physico-chemical signal of whatever nature and the degree of binding must be determined and not assumed, based on some ad hoc intuitive relationship/model, leading to determination of the true binding isotherm. The quantitative methods reviewed and discussed here allow an experimenter to rigorously determine the degree of binding and the free ligand concentration, i.e., they lead to the construction of the thermodynamic binding isotherm in a model-independent fashion from physico-chemical titration curves.

The E. coli DNA Replication Fork

DNA replication in Escherichia coli initiates at oriC, the origin of replication and proceeds bidirectionally, resulting in two replication forks that travel in opposite directions from the origin. Here, we focus on events at the replication fork. The replication machinery (or replisome), first assembled on both forks at oriC, contains the DnaB helicase for strand separation, and the DNA polymerase III holoenzyme (Pol III HE) for DNA synthesis. DnaB interacts transiently with the DnaG primase for RNA priming on both strands. The Pol III HE is made up of three subassemblies: (i) the αɛθ core polymerase complex that is present in two (or three) copies to simultaneously copy both DNA strands, (ii) the β2 sliding clamp that interacts with the core polymerase to ensure its processivity, and (iii) the seven-subunit clamp loader complex that loads β2 onto primer-template junctions and interacts with the α polymerase subunit of the core and the DnaB helicase to organize the two (or three) core polymerases. Here, we review the structures of the enzymatic components of replisomes, and the protein-protein and protein-DNA interactions that ensure they remain intact while undergoing substantial dynamic changes as they function to copy both the leading and lagging strands simultaneously during coordinated replication.

Quantitative analysis of protein-protein interactions

Numerous authors, including contributors to this volume, have described methods to detect protein-protein interactions. Many of these approaches are now accessible to the inexperienced investigator thanks to core facilities and/or affordable instrumentation. This chapter discusses some common design considerations that are necessary to obtain valid measurements, as well as the assumptions and analytical methods that are relevant to the quantitation of these interactions.

Quantitative Thermodynamic Analyses of Spectroscopic Titration Curves

Elucidation of ligand - macromolecule interactions requires detailed knowledge of energetics of the formed complexes. Spectroscopic methods are most commonly used in characterizing molecular interactions in solution. The methods do not require large quantities of material and most importantly, do not perturb the studied reactions. However, spectroscopic methods absolutely require the determination of the relationship between the observed signal and the degree of binding in order to obtain meaningful interaction parameters. In other words, the meaningful, thermodynamic interaction parameters can be only determined if the relationship between the observed signal and the degree of binding is determined and not assumed, based on an ad hoc model of the relationship. The approaches discussed here allow an experimenter to quantitatively determine the degree of binding and the free ligand concentration, i.e., they enable to construct thermodynamic binding isotherms in a model-independent fashion.

Examination of polypeptide substrate specificity for Escherichia coli ClpB

Escherichia coli ClpB is a molecular chaperone that belongs to the Clp/Hsp100 family of AAA+ proteins. ClpB is able to form a hexameric ring structure to catalyze protein disaggregation with the assistance of the DnaK chaperone system. Our knowledge of the mechanism of how ClpB recognizes its substrates is still limited. In this study, we have quantitatively investigated ClpB binding to a number of unstructured polypeptides using steady-state anisotropy titrations. To precisely determine the binding affinity for the interaction between ClpB hexamers and polypeptide substrates the titration data were subjected to global non-linear least squares analysis incorporating the dynamic equilibrium of ClpB assembly. Our results show that ClpB hexamers bind tightly to unstructured polypeptides with binding affinities in the range of ∼3-16 nM. ClpB exhibits a modest preference of binding to Peptide B1 with a binding affinity of (1.7 ± 0.2) nM. Interestingly, we found that ClpB binds to an unstructured polypeptide substrate of 40 and 50 amino acids containing the SsrA sequence at the C-terminus with an affinity of (12 ± 3) nM and (4 ± 2) nM, respectively. Whereas, ClpB binds the 11-amino acid SsrA sequence with an affinity of (140 ± 20) nM, which is significantly weaker than other polypeptide substrates that we tested here. We hypothesize that ClpB, like ClpA, requires substrates with a minimum length for optimal binding. Finally, we present evidence showing that multiple ClpB hexamers are involved in binding to polypeptides ≥152 amino acids.

Monomeric nature of dengue virus NS3 helicase and thermodynamic analysis of the interaction with single-stranded RNA

Dengue virus nonstructural protein 3 (NS3) is a multifunctional protein formed by a superfamily-2 RNA helicase linked to a protease domain. In this work, we report results from in vitro experiments designed to determine the oligomeric state of dengue virus NS3 helicase (NS3h) and to characterize fundamental properties of the interaction with single-stranded (ss)RNA. Pulsed field gradient-NMR spectroscopy was used to determine the effective hydrodynamic radius of NS3h, which was constant over a wide range of protein concentrations in the absence and presence of ssRNA. Size exclusion chromatography-static light scattering experiments showed that NS3h eluted as a monomeric molecule even in the presence of ssRNA. Binding of NS3h to ssRNA was studied by quantitative fluorescence titrations using fluorescein-labeled and unlabeled ssRNA oligonucleotides of different lengths, and the effect of the fluorescein label on the interaction parameters was also analyzed. Experimental results were well described by a statistical thermodynamic model based on the theory of non-specific interactions of large ligands to a one-dimensional lattice. We found that binding of NS3h to ssRNA oligonucleotides and to poly(A) is characterized by minimum and occluded binding site sizes both of 10 nucleotides and by a weak positive cooperativity between adjacent proteins.

The Arg-62 residues of the TREX1 exonuclease act across the dimer interface contributing to catalysis in the opposing protomers

TREX1 is a 3'-deoxyribonuclease that degrades single- and double-stranded DNA (ssDNA and dsDNA) to prevent inappropriate nucleic acid-mediated immune activation. More than 40 different disease-causing TREX1 mutations have been identified exhibiting dominant and recessive genetic phenotypes in a spectrum of autoimmune disorders. Mutations in TREX1 at positions Asp-18 and Asp-200 to His and Asn exhibit dominant autoimmune phenotypes associated with the clinical disorders familial chilblain lupus and Aicardi-Goutières syndrome. Our previous biochemical studies showed that the TREX1 dominant autoimmune disease phenotype depends upon an intact DNA-binding process coupled with dysfunctional active site chemistry. Studies here show that the TREX1 Arg-62 residues extend across the dimer interface into the active site of the opposing protomer to coordinate substrate DNA and to affect catalysis in the opposing protomer. The TREX1(R62A/R62A) homodimer exhibits ∼50-fold reduced ssDNA and dsDNA degradation activities relative to TREX1(WT). The TREX1 D18H, D18N, D200H, and D200N dominant mutant enzymes were prepared as compound heterodimers with the TREX1 R62A substitution in the opposing protomer. The TREX1(D18H/R62A), TREX1(D18N/R62A), TREX1(D200H/R62A), and TREX1(D200N/R62A) compound heterodimers exhibit higher levels of ss- and dsDNA degradation activities than the homodimers demonstrating the requirement for TREX1 Arg-62 residues to provide necessary structural elements for full catalytic activity in the opposing TREX1 protomer. This concept is further supported by the loss of dominant negative effects in the TREX1 D18H, D18N, D200H, and D200N compound heterodimers. These data provide compelling evidence for the required TREX1 dimeric structure for full catalytic function.

The Escherichia coli primosomal DnaT protein exists in solution as a monomer-trimer equilibrium system

The oligomerization reaction of the Escherichia coli DnaT protein has been quantitatively examined using fluorescence anisotropy and analytical ultracentrifugation methods. In solution, DnaT exists as a monomer-trimer equilibrium system. At the estimated concentration in the E. coli cell, DnaT forms a mixture of the monomer and trimer states with a 3:1 molar ratio. In spite of the modest affinity, the trimerization is a highly cooperative process, without the detectable presence of the intervening dimer. The DnaT monomer consists of a large N-terminal core domain and a small C-terminal region. The removal of the C-terminal region dramatically affects the oligomerization process. The isolated N-terminal domain forms a dimer instead of the trimer. These results indicate that the DnaT monomer possesses two structurally different, interacting sites. One site is located on the N-terminal domain, and two monomers, in the trimer, are associated through their binding sites located on that domain. The C-terminal region forms the other interacting site. The third monomer is engaged through the C-terminal regions. Surprisingly, the high affinity of the N-terminal domain dimer indicates that the DnaT monomer undergoes a conformational transition upon oligomerization, involving the C-terminal region. These data and the high specificity of the trimerization reaction, i.e., lack of any oligomers higher than a trimer, indicate that each monomer in the trimer is in contact with the two remaining monomers. A model of the global structure of the DnaT trimer based on the thermodynamic and hydrodynamic data is discussed.

Energetics of the Escherichia coli DnaT protein trimerization reaction

Thermodynamic and structural characteristics of the Escherichia coli DnaT protein trimerization reaction have been quantitatively examined using fluorescence anisotropy and analytical ultracentrifugation methods. Binding of magnesium to the DnaT monomers regulates the intrinsic affinity of the DnaT trimerization reaction. Comparison between the DnaT trimer and the isolated N-terminal core domain suggests that magnesium binds to the N-terminal domain but does not associate with the C-terminal region of the protein. The magnesium binding process is complex and involves approximately three Mg(2+) cations per protein monomer. The observed effect seems to be specific for Mg(2+). In the examined salt concentration range, monovalent cations and anions do not affect the trimer assembly process. However, magnesium affects neither the cooperativity of the trimerization reaction nor the GnHCl-induced trimer dissociation, strongly indicating that Mg(2+) indirectly stabilizes the trimer through the induced changes in the monomer structures. Nevertheless, formation of the trimer also involves specific conformational changes of the monomers, which are independent of the presence of magnesium. Binding of Mg(2+) cations dramatically changes the thermodynamic functions of the DnaT trimerization, transforming the reaction from a temperature-dependent to temperature-independent process. Highly cooperative dissociation of the trimer by GnHCl indicates that both interacting sites of the monomer, located on the N-terminal core domain and formed by the small C-terminal region, are intimately integrated with the entire protein structure. In the intact protein, the C-terminal region most probably interacts with the corresponding binding site on the N-terminal domain of the monomer. Functional implications of these findings are discussed.

SSB-DNA binding monitored by fluorescence intensity and anisotropy

Fluorescence methods have proven to be extremely useful tools for quantitative studies of the equilibria and kinetics of protein-DNA interactions. If the protein contains tryptophan (Trp), as is often the case, and there is a change in intrinsic Trp fluorescence of the protein, one can use this change in signal (quenching/enhancement) to monitor binding. One can also attach an extrinsic fluorophore to either the protein or the DNA and monitor binding due to a change in fluorescence intensity or a change in fluorescence anisotropy. Such equilibrium studies can provide important quantitative information on stoichiometries (occluded site size, number of binding sites) and energetics (affinities and cooperativities) of the interactions. This information is needed to understand the mechanisms of protein-DNA interactions. A critical aspect of such approaches for systems that have non-unity stoichiometries (e.g., a protein that binds multiple ligands) is knowledge of the relationship between the change in fluorescence signal (intensity or anisotropy) and the average extent of binding. Here we describe procedures for using fluorescence approaches to examine the stoichiometries and equilibrium binding affinities of Escherichia coli single-stranded DNA-binding protein (SSB) and Deinococcus radiodurans SSB with long polymeric ssDNA to determine an occluded site size. We also provide examples of studies of SSB binding to shorter oligonucleotides to demonstrate analysis and fitting of the data to an appropriate model (monitoring fluorescence intensity or anisotropy) to obtain quantitative estimates of equilibrium binding parameters. We emphasize that the solution conditions (especially salt concentration and type) can influence not only the binding affinity, but also the mode by which an SSB oligomer binds ssDNA.

The N-terminal domain of the Escherichia coli PriA helicase contains both the DNA- and nucleotide-binding sites. Energetics of domain--DNA interactions and allosteric effect of the nucleotide cofactors

Functional interactions of the Escherichia coli PriA helicase 181N-terminal domain with the DNA and nucleotide cofactors have been quantitatively examined. The isolated 181N-terminal domain forms a stable dimer in solution, most probably reflecting the involvement of the domain in specific cooperative interactions of the intact PriA protein--double-stranded DNA (dsDNA) complex. Only one monomer of the domain dimer binds the DNA; i.e., the dimer has one effective DNA-binding site. Although the total site size of the dimer--single-stranded DNA (ssDNA) complex is ~13 nucleotides, the DNA-binding subsite engages in direct interactions with approximately five nucleotides. A small number of interacting nucleotides indicates that the DNA-binding subsites of the PriA helicase, i.e., the strong subsite on the helicase domain and the weak subsite on the N-terminal domain, are spatially separated in the intact enzyme. Contrary to current views, the subsite has an only slight preference for the 3'-end OH group of the ssDNA and lacks any significant base specificity, although it has a significant dsDNA affinity. Unlike the intact helicase, the DNA-binding subsite of the isolated domain is in an open conformation, indicating the presence of the direct helicase domain--N-terminal domain interactions. The discovery that the 181N-terminal domain possesses a nucleotide-binding site places the allosteric, weak nucleotide-binding site of the intact PriA on the N-terminal domain. The specific effect of ADP on the domain DNA-binding subsite indicates that in the intact helicase, the bound ADP not only opens the DNA-binding subsite but also increases its intrinsic DNA affinity.

Full-length Dengue virus RNA-dependent RNA polymerase-RNA/DNA complexes: stoichiometries, intrinsic affinities, cooperativities, base, and conformational specificities

Fundamental aspects of interactions of the Dengue virus type 3 full-length polymerase with the single-stranded and double-stranded RNA and DNA have been quantitatively addressed. The polymerase exists as a monomer with an elongated shape in solution. In the absence of magnesium, the total site size of the polymerase-ssRNA complex is 26 ± 2 nucleotides. In the presence of Mg(2+), the site size increases to 29 ± 2 nucleotides, indicating that magnesium affects the enzyme global conformation. The enzyme shows a preference for the homopyrimidine ssRNAs. Positive cooperativity in the binding to homopurine ssRNAs indicates that the type of nucleic acid base dramatically affects the enzyme orientation in the complex. Both the intrinsic affinity and the cooperative interactions are accompanied by a net ion release. The polymerase binds the dsDNA with an affinity comparable with the ssRNAs affinity, indicating that the binding site has an open conformation in solution. The lack of detectable dsRNA or dsRNA-DNA hybrid affinities indicates that the entry to the binding site is specific for the sugar-phosphate backbone and/or conformation of the duplex.

Binding of two PriA-PriB complexes to the primosome assembly site initiates primosome formation

A direct quantitative analysis of the initial steps in primosome assembly, involving PriA and PriB proteins and the minimal primosome assembly site (PAS) of phage ϕX174, has been performed using fluorescence intensity, fluorescence anisotropy titration, and fluorescence resonance energy transfer techniques. We show that two PriA molecules bind to the PAS at both strong and weak binding sites on the DNA, respectively, without detectable cooperative interactions. Binding of the PriB dimer to the PriA-PAS complex dramatically increases PriA's affinity for the strong site, but only slightly affects its affinity for the weak site. Associations with the strong and weak sites are driven by apparent entropy changes, with binding to the strong site accompanied by a large unfavorable enthalpy change. The PriA-PriB complex, formed independently of the DNA, is able to directly recognize the PAS without the preceding the binding of PriA to the PAS. Thus, the high-affinity state of PriA for PAS is generated through PriA-PriB interactions. The effect of PriB is specific for PriA-PAS association, but not for PriA-double-stranded DNA or PriA-single-stranded DNA interactions. Only complexes containing two PriA molecules can generate a profound change in the PAS structure in the presence of ATP. The obtained results provide a quantitative framework for the elucidation of further steps in primosome assembly and for quantitative analyses of other molecular machines of cellular metabolism.

Macromolecular competition titration method accessing thermodynamics of the unmodified macromolecule-ligand interactions through spectroscopic titrations of fluorescent analogs

Analysis of thermodynamically rigorous binding isotherms provides fundamental information about the energetics of the ligand-macromolecule interactions and often an invaluable insight about the structure of the formed complexes. The Macromolecular Competition Titration (MCT) method enables one to quantitatively obtain interaction parameters of protein-nucleic acid interactions, which may not be available by other methods, particularly for the unmodified long polymer lattices and specific nucleic acid substrates, if the binding is not accompanied by adequate spectroscopic signal changes. The method can be applied using different fluorescent nucleic acids or fluorophores, although the etheno-derivatives of nucleic acid are especially suitable as they are relatively easy to prepare, have significant blue fluorescence, their excitation band lies far from the protein absorption spectrum, and the modification eliminates the possibility of base pairing with other nucleic acids. The MCT method is not limited to the specific size of the reference nucleic acid. Particularly, a simple analysis of the competition titration experiments is described in which the fluorescent, short fragment of nucleic acid, spanning the exact site-size of the protein-nucleic acid complex, and binding with only a 1:1 stoichiometry to the protein, is used as a reference macromolecule. Although the MCT method is predominantly discussed as applied to studying protein-nucleic acid interactions, it can generally be applied to any ligand-macromolecule system by monitoring the association reaction using the spectroscopic signal originating from the reference macromolecule in the presence of the competing macromolecule, whose interaction parameters with the ligand are to be determined.

Interactions of the DNA polymerase X from African Swine Fever Virus with the ssDNA. Properties of the total DNA-binding site and the strong DNA-binding subsite

Interactions of the polymerase X from the African Swine Fever Virus with the ssDNA have been studied, using quantitative fluorescence titration and fluorescence resonance energy transfer techniques. The primary DNA-binding subsite of the enzyme, independent of the DNA conformation, is located on the C-terminal domain. Association of the bound DNA with the catalytic N-terminal domain finalizes the engagement of the total DNA-binding site of the enzyme and induces a large topological change in the structure of the bound ssDNA. The free energy of binding includes a conformational transition of the protein. Large positive enthalpy changes accompanying the ASFV pol X-ssDNA association indicate that conformational changes of the complex are induced by the engagement of the N-terminal domain. The enthalpy changes are offset by large entropy changes accompanying the DNA binding to the C-terminal domain and the total DNA-binding site, predominantly resulting from the release of water molecules.

Functional characterization of the multidomain F plasmid TraI relaxase-helicase

TraI, a bifunctional enzyme containing relaxase and helicase activities, initiates and drives the conjugative transfer of the Escherichia coli F plasmid. Here, we examined the structure and function of the TraI helicase. We show that TraI binds to single-stranded DNA (ssDNA) with a site size of ∼25 nucleotides, which is significantly longer than the site size of other known superfamily I helicases. Low cooperativity was observed with the binding of TraI to ssDNA, and a double-stranded DNA-binding site was identified within the N-terminal region of TraI 1-858, outside the core helicase motifs of TraI. We have revealed that the affinity of TraI for DNA is negatively correlated with the ionic strength of the solution. The binding of AMPPNP or ADP results in a 3-fold increase in the affinity of TraI for ssDNA. Moreover, TraI prefers to bind ssDNA oligomers containing a single type of base. Finally, we elucidated the solution structure of TraI using small angle x-ray scattering. TraI exhibits an ellipsoidal shape in solution with four domains aligning along one axis. Taken together, these data result in the assembly of a model for the multidomain helicase activity of TraI.

The primary DNA-binding subsite of the rat pol β. Energetics of interactions of the 8-kDa domain of the enzyme with the ssDNA

Interactions of the 8-kDa domain of the rat pol β and the intact enzyme with the ssDNA have been studied, using the quantitative fluorescence titration technique. The 8-kDa domain induces large topological changes in the bound DNA structure and engages much larger fragments of the DNA than when embedded in the intact enzyme. The DNA affinity of the domain is predominantly driven by entropy changes, dominated by the water release from the protein. The thermodynamic characteristics dramatically change when the domain is embedded in the intact polymerase, indicating the presence of significant communication between the 8-kDa domain and the catalytic 31-kDa domain. The diminished water release from the 31-kDa domain strongly contributes to its dramatically lower DNA affinity, as compared to the 8-kDa domain. Unlike the 8-kDa domain, the DNA binding of the intact pol β is driven by entropy changes, originating from the structural changes of the formed complexes.

Unique properties of the Mtr4p-poly(A) complex suggest a role in substrate targeting

Mtr4p is a DEVH-box helicase required for 3'-end processing and degradation of various nuclear RNA substrates. In particular, Mtr4p is essential for the creation of 5.8S rRNA, U4 snRNA, and some snoRNAs and for the degradation of cryptic unstable transcripts (CUTs), aberrant mRNAs, and aberrant tRNAs. Many instances of 3'-end processing require limited polyadenylation to proceed. While polyadenylation can signal degradation in species from bacteria to humans, the mechanism whereby polyadenylated substrates are delivered to the degradation machinery is unknown. Our previous work has shown that Mtr4p preferentially binds poly(A) RNA. We suspect that this preference aids in targeting polyadenylated RNAs to the exosome. In these studies, we have investigated the mechanism underlying the preference of Mtr4p for poly(A) substrates as a means of understanding how Mtr4p might facilitate targeting. Our analysis has revealed that recognition of poly(A) substrates involves sequence-specific changes in the architecture of Mtr4p-RNA complexes. Furthermore, these differences significantly affect downstream activities. In particular, homopolymeric stretches like poly(A) ineffectively stimulate the ATPase activity of Mtr4p and suppress the rate of dissociation of the Mtr4p-RNA complex. These findings indicate that the Mtr4p-poly(A) complex is unique and ideally suited for targeting key substrates to the exosome.

The Escherichia coli PriA helicase-double-stranded DNA complex: location of the strong DNA-binding subsite on the helicase domain of the protein and the affinity control by the two nucleotide-binding sites of the enzyme

The Escherichia coli PriA helicase complex with the double-stranded DNA (dsDNA), the location of the strong DNA-binding subsite, and the effect of the nucleotide cofactors, bound to the strong and weak nucleotide-binding site of the enzyme on the dsDNA affinity, have been analyzed using the fluorescence titration, analytical ultracentrifugation, and photo-cross-linking techniques. The total site size of the PriA-dsDNA complex is only 5±1 bp, that is, dramatically lower than 20±3 nucleotides occluded in the enzyme-single-stranded DNA (ssDNA) complex. The helicase associates with the dsDNA using its strong ssDNA-binding subsite in an orientation very different from the complex with the ssDNA. The strong DNA-binding subsite of the enzyme is located on the helicase domain of the PriA protein. The dsDNA intrinsic affinity is considerably higher than the ssDNA affinity and the binding process is accompanied by a significant positive cooperativity. Association of cofactors with strong and weak nucleotide-binding sites of the protein profoundly affects the intrinsic affinity and the cooperativity, without affecting the stoichiometry. ATP analog binding to either site diminishes the intrinsic affinity but preserves the cooperativity. ADP binding to the strong site leads to a dramatic increase of the cooperativity and only slightly affects the affinity, while saturation of both sites with ADP strongly increases the affinity and eliminates the cooperativity. Thus, the coordinated action of both nucleotide-binding sites on the PriA-dsDNA interactions depends on the structure of the phosphate group. The significance of these results for the enzyme activities in recognizing primosome assembly sites or the ssDNA gaps is discussed.

Ensemble and single-molecule fluorescence-based assays to monitor DNA binding, translocation, and unwinding by iron-sulfur cluster containing helicases

Many quantitative approaches for analysis of helicase-nucleic acid interactions require a robust and specific signal, which reports on the presence of the helicase and its position on a nucleic acid lattice. Since 2006, iron-sulfur (FeS) clusters have been found in a number of helicases. They serve as endogenous quenchers of Cy3 and Cy5 fluorescence which can be exploited to characterize FeS cluster containing helicases both in ensemble-based assays and at the single-molecule level. Synthetic oligonucleotides site-specifically labeled with either Cy3 or Cy5 can be used to create a variety of DNA substrates that can be used to characterized DNA binding, as well as helicase translocation and unwinding. Equilibrium binding affinities for ssDNA, duplex and branched DNA substrates can be determined using bulk assays. Identification of preferred cognate substrates, and the orientation and position of the helicase when bound to DNA can also be determined by taking advantage of the intrinsic quencher in the helicase. At the single-molecule level, real-time observation of the helicase translocating along DNA either towards the dye or away from the dye can be used to determine the rate of translocation by the helicase on ssDNA and its orientation when bound to DNA. The use of duplex substrates can reveal the rate of unwinding and processivity of the helicase. Finally, the FeS cluster can be used to visualize protein-protein interactions, and to examine the interplay between helicases and other DNA binding proteins on the same DNA substrate.

Interactions of the Escherichia coli primosomal PriB protein with the single-stranded DNA. Stoichiometries, intrinsic affinities, cooperativities, and base specificities

Quantitative analysis of the interactions of the Escherichia coli primosomal PriB protein with a single-stranded DNA was done using quantitative fluorescence titration, photocrosslinking, and analytical ultracentrifugation techniques. Stoichiometry studies were done with a series of etheno-derivatives of single-stranded (ss) DNA oligomers. Interactions with the unmodified nucleic acids were studied, using the macromolecular competition titration (MCT) method. The total site-size of the PriB dimer-ssDNA complex, i.e. the maximum number of nucleotides occluded by the PriB dimer in the complex, is 12+/-1 nt. The protein has a single DNA-binding site, which is located centrally within the dimer and has a functionally homogeneous structure. The stoichiometry and photocrosslinking data show that only a single monomer of the PriB dimer engages in interactions with the nucleic acid. The analysis of the PriB binding to long oligomers was done using a statistical thermodynamic model that takes into account the overlap of potential binding sites and cooperative interactions. The PriB dimer binds the ssDNA with strong positive cooperativity. Both the intrinsic affinity and cooperative interactions are accompanied by a net ion release, with anions participating in the ion exchange process. The intrinsic binding process is an entropy-driven reaction, suggesting strongly that the DNA association induces a large conformational change in the protein. The PriB protein shows a dramatically strong preference for the homo-pyrimidine oligomers with an intrinsic affinity higher by about three orders of magnitude, as compared to the homo-purine oligomers. The significance of these results for PriB protein activity is discussed.

The Escherichia coli PriA helicase specifically recognizes gapped DNA substrates: effect of the two nucleotide-binding sites of the enzyme on the recognition process

Energetics and specificity of interactions between the Escherichia coli PriA helicase and the gapped DNAs have been studied, using the quantitative fluorescence titration and analytical ultracentrifugation methods. The gap complex has a surprisingly low minimum total site size, corresponding to approximately 7 nucleotides of the single-stranded DNA (ssDNA), as compared with the site size of approximately 20 nucleotides of the enzyme-ssDNA complex. The dramatic difference in stoichiometries indicates that the enzyme predominantly engages the strong DNA-binding subsite in interactions with the gap and assumes a very different orientation in the gap complex, as compared with the complex with the ssDNA. The helicase binds the ssDNA gaps with 4-5 nucleotides with the highest affinity, which is approximately 3 and approximately 2 orders of magnitude larger than the affinities for the ssDNA and double-stranded DNA, respectively. In the gap complex, the protein does not engage in cooperative interactions with the enzyme predominantly associated with the surrounding dsDNA. Binding of nucleoside triphosphate to the strong and weak nucleotide-binding sites of the helicase eliminates the selectivity of the enzyme for the size of the gap, whereas saturation of both sites with ADP leads to amplified affinity for the ssDNA gap containing 5 nucleotides and engagement of an additional protein area in interactions with the nucleic acid.

Mechanisms of interactions of the nucleotide cofactor with the RepA protein of plasmid RSF1010. Binding dynamics studied using the fluorescence stopped-flow method

The dynamics of the nucleotide binding to a single, noninteracting nucleotide-binding site of the hexameric helicase RepA protein of plasmid RSF1010 has been examined, using the fluorescence stopped-flow method. The experiments have been performed with fluorescent analogues of ATP and ADP, TNP-ATP and TNP-ADP, respectively. In the presence of Mg(2+), the association of the cofactors proceeds as a sequential three-step process [Formula: see text] The sequential nature of the mechanism indicates the lack of significant conformational equilibria of the helicase prior to nucleotide binding. The major conformational change of the RepA helicase-nucleotide complex occurs in the formation of (H-N)(2), which is characterized by a very high value of the partial equilibrium constant and large positive changes in the apparent enthalpy and entropy. Strong stabilizing interactions between subunits of the RepA hexamer contribute to the observed dynamics and energetics of the internal transitions of the formed complexes. Magnesium cations mediate the efficient and fast conformational transitions of the protein, in a manner independent of the structure of the cofactor phosphate group. The ssDNA bound to the enzyme preferentially selects a single intermediate of the RepA-ATP analogue complex, (H-N)(2), while the DNA has no effect on the intermediates of the RepA-ADP complex. Allosteric interactions between the nucleotide- and DNA-binding site are established in the initial stages of formation of the complex. Moreover, in the presence of the single-stranded DNA, all the transitions in the nucleotide binding to the helicase become sensitive to the structure of the phosphate group of the cofactor.

Escherichia coli DnaB helicase-DnaC protein complex: allosteric effects of the nucleotides on the nucleic acid binding and the kinetic mechanism of NTP hydrolysis. 3

Allosteric interactions between the DNA- and NTP-binding sites of the Escherichia coli DnaB helicase engaged in the DnaB-DnaC complex and the mechanism of NTP hydrolysis by the complex have been examined using the fluorescence titration, analytical ultracentrifugation, and rapid quench-flow technique. Surprisingly, the ssDNA affinity of the DnaB-DnaC complex is independent of the structure of the phosphate group of the cofactor bound to the helicase. Thus, the DnaC protein eliminates the antagonistic allosteric effect of NTP and NDP on the ssDNA affinity of the enzyme. The protein changes the engagement of the DNA-binding subsites of the helicase in interactions with the nucleic acid, depending on the structure of the phosphate group of the present nucleotide cofactor and profoundly affects the structure of the bound DNA. Moreover, the ssDNA affinity of the helicase in the DnaB-DnaC complex is under the control of the nucleotide-binding site of the DnaC protein. The protein does not affect the NTP hydrolysis mechanism of the helicase. Nevertheless, the rate of the chemical step is diminished in the DnaB-DnaC complex. In the tertiary DnaB-DnaC-ssDNA complex, the ssDNA changes the internal dynamics between intermediates of the pyrimidine cofactor, in a manner independent of the base composition of the DNA, while the hydrolysis step of the purine cofactor is specifically stimulated by the homoadenosine ssDNA. The significance of these results for functional activities of the DnaB-DnaC complex is discussed.

Mechanism of NTP hydrolysis by the Escherichia coli primary replicative helicase DnaB protein. 2. Nucleotide and nucleic acid specificities

The kinetic mechanism of NTP binding and hydrolysis by the Escherichia coli replicative helicase, the DnaB protein, in the absence and presence of the single-stranded DNA (ssDNA), has been quantitatively examined using the rapid quench-flow technique, under single-turnover conditions. In the case of both the free helicase and the enzyme-ssDNA complexes, the mechanism is independent of the type of base of the cofactor or the DNA; the bimolecular association is followed by the reversible chemical hydrolysis and subsequent conformational transition of the enzyme-product complex. The NTP hydrolysis step is significantly faster for the purine than for the pyrimidine cofactor, both in the absence and in the presence of the DNA. The temperature effect indicates that the nature of intermediates of the purine nucleotide, ATP, is different from the nature of the analogous intermediates of the pyrimidine nucleotide, CTP. Nevertheless, both types of cofactors seem to approach a similar "exit" state at the end of the reaction. The effect of ssDNA on the kinetics of NTP hydrolysis depends on the type of nucleotide cofactor and the base composition of the DNA and is centered at the hydrolysis step. Homoadenosine ssDNA oligomers are particularly effective in increasing the hydrolysis rate. The allosteric signal from the DNA, which activates the NTP hydrolysis, comes predominantly from the strong DNA-binding subsite. The role of the weak DNA-binding subsite is to modulate the allosteric effect of the strong subsite. The significance of these results for the mechanism of the free energy transduction by the DnaB helicase is discussed.

Interactions of the Escherichia coli DnaB-DnaC protein complex with nucleotide cofactors. 1. Allosteric conformational transitions of the complex

Interactions of nucleotide cofactors with both protein components of the Escherichia coli DnaB helicase complex with the replication factor, the DnaC protein, have been examined using MANT-nucleotide analogues. At saturation, in all examined stationary complexes, including the binary, DnaB-DnaC, and tertiary, DnaB-DnaC-ssDNA, complexes, the helicase binds six cofactor molecules. Thus, protein-protein and protein-DNA interactions do not affect the maximum stoichiometry of the helicase-nucleotide interactions. The single-stranded DNA dramatically increases the ATP analogue affinity, while it has little effect on the affinity of the NDP analogues, indicating that stationary complexes reflect allosteric interactions between the DNA- and NTP-binding site prior to the cofactor hydrolysis step and subsequent to product release. In the binary complex, the DnaC protein diminishes the intrinsic affinity and increases the negative cooperativity in the cofactor binding to the helicase; an opposite effect of the protein on the cofactor-helicase interactions occurs in the tertiary complex. The DnaC protein retains its nucleotide binding capability in the binary and tertiary complexes with the helicase. Surprisingly, the DnaC protein-nucleotide interactions, in the binary and tertiary complexes, are characterized by positive cooperativity. The DnaC assembles on the helicase as a hexamer, which exists in two conformational states and undergoes an allosteric transition, induced by the cofactor. Cooperativity of the allosteric transition depends on the structure of the phosphate group of the nucleotide. The significance of the results for the DnaB-DnaC complex activities is discussed.

Dynamics of the ssDNA recognition by the RepA hexameric helicase of plasmid RSF1010: analyses using fluorescence stopped-flow intensity and anisotropy methods

The kinetic mechanism of the single-stranded DNA (ssDNA) recognition by the RepA hexameric replicative helicase of the plasmid RSF1010 and the nature of formed intermediates, in the presence of the ATP nonhydrolyzable analog, beta,gamma-imidoadenosine-5'-triphosphate (AMP-PNP), have been examined, using the fluorescence intensity and anisotropy stopped-flow and analytical ultracentrifugation methods. Association of the RepA hexamer with the ssDNA oligomers that engage the total DNA-binding site and exclusively the strong DNA-binding subsite is a minimum four-step mechanism [formula: see text]. Extreme stability of the RepA hexamer precludes any disintegration of its structure, and the sequential character of the mechanism indicates that the enzyme exists in a predominantly single conformation prior to the association with the nucleic acid. Moreover, the hexameric helicase possesses a DNA-binding site located outside its cross channel. The reaction steps have dramatically different dynamics, with rate constants differing by 2-3 orders of magnitude. Such behavior indicates a very diverse nature of the observed transitions, which comprises binding steps and large conformational transitions of the helicase, including local opening of the hexameric structure. Steady-state fluorescence anisotropies of intermediates indicate that the entry of the DNA into the cross channel is initiated from the 5' end of the bound nucleic acid. The global structure of the tertiary complex RepA-ssDNA-AMP-PNP is very different from the structure of the binary complex RepA-AMP-PNP, indicating that, in equilibrium, the RepA hexamer-ssDNA-AMP-PNP complex exists as a mixture of partially open states.

Thermodynamic analysis of the structure-function relationship in the total DNA-binding site of enzyme-DNA complexes

Both helicases and polymerases perform their activities when bound to the nucleic acids, that is, the enzymes possess a nucleic acid-binding site. Functional complexity of the helicase or the polymerase action is reflected in the intricate structure of the total nucleic acid-binding site, which allows the enzymes to control and change their nucleic acid affinities during the catalysis. Understanding the fundamental aspects of the functional heterogeneity of the total nucleic acid-binding site of a polymerase or helicase can be achieved through quantitative thermodynamic analysis of the enzyme binding to the nucleic acids oligomers, which differ in their length. Such an analysis allows the experimenter to assess the presence of areas with strong and weak affinity for the nucleic acid, that is, the presence of the strong and the weak nucleic acid-binding subsites, determine the number of the nucleotide occlude by each subsite, and estimate their intrinsic free energies of interactions.

Interaction of the adenoviral IVa2 protein with a truncated viral DNA packaging sequence

Adenoviral (Ad) infection typically poses little health risk for immunosufficient individuals. However, for immunocompromised individuals, such as AIDS patients and organ transplant recipients, especially pediatric heart transplant recipients, Ad infection is common and can be lethal. Ad DNA packaging is the process whereby the Ad genome becomes encapsulated by the viral capsid. Specific packaging is dependent upon the packaging sequence (PS), which is composed of seven repeated elements called A repeats. The Ad protein, IVa2, which is required for viral DNA packaging, has been shown to bind specifically to synthetic DNA probes containing A repeats I and II, however, the molecular details of this interaction have not been investigated. In this work we have studied the binding of a truncated form of the IVa2 protein, that has previously been shown to be sufficient for virus viability, to a DNA probe containing A repeats I and II. We find that the IVa2 protein exists as a monomer in solution, and that a single IVa2 monomer binds to this DNA with high affinity (K(d)< approximately 10 nM), and moderate specificity, and that the trIVa2 protein interacts in a fundamentally different way with DNA containing A repeats than it does with non-specific DNA. We also find that at elevated IVa2 concentrations, additional binding, beyond the singly ligated complex, is observed. When this reaction is modeled as representing the binding of a second IVa2 monomer to the singly ligated complex, the K(d) is 1.4+/-0.7 microM, implying a large degree of negative cooperativity exists for placing two IVa2 monomers on a DNA with adjacent A repeats.

Cooperative DNA binding and communication across the dimer interface in the TREX2 3' --> 5'-exonuclease

The activity of human TREX2-catalyzed 3' --> 5'-deoxyribonuclease has been analyzed in steady-state and single turnover kinetic assays and in equilibrium DNA binding studies. These kinetic data provide evidence for cooperative DNA binding within TREX2 and for coordinated catalysis between the TREX2 active sites supporting a model for communication between the protomers of a TREX2 dimer. Mobile loops positioned adjacent to the active sites provide the major DNA binding contribution and facilitate subsequent binding into the active sites. Mutations of three arginine residues on these loops cause decreased TREX2 activities by up to 60-fold. Steady-state kinetic assays of these arginine to alanine TREX2 variants result in increased K(m) values for DNA substrate with no effect on k(cat) values indicating contributions exclusively to DNA binding by all three of the loop arginines. TREX2 heterodimers were prepared to determine whether exonuclease activity in one protomer is communicated to the opposing protomer. Evidence for communication across the dimer interface is provided by the 7-fold lower catalytic activity measured in the TREX2(WT/H188A) heterodimer compared with the TREX2(WT) homodimer, contrasting the 2-fold lower activity measured in the TREX2(WT/R163A,R165A,R167A) heterodimer. The measured activity in TREX2(WT/H188A) heterodimer indicates that defective catalysis in one protomer reduces activity in the opposing protomer. A DNA binding analysis of TREX2 and the heterodimers indicates a cooperative binding effect within the TREX2 protomer. Finally, single turnover kinetic assays identify DNA binding as the rate-limiting step in TREX2 catalysis.

Kinetic control of Mg2+-dependent melting of duplex DNA ends by Escherichia coli RecBC

Escherichia coli RecBCD is a highly processive DNA helicase involved in double-strand break repair and recombination that possesses two helicase/translocase subunits with opposite translocation directionality (RecB (3' to 5') and RecD (5' to 3')). RecBCD has been shown to melt out approximately 5-6 bp upon binding to a blunt-ended duplex DNA in a Mg(2+)-dependent, but ATP-independent reaction. Here, we examine the binding of E. coli RecBC helicase (minus RecD), also a processive helicase, to duplex DNA ends in the presence and in the absence of Mg(2+) in order to determine if RecBC can also melt a duplex DNA end in the absence of ATP. Equilibrium binding of RecBC to DNA substrates with ends possessing pre-formed 3' and/or 5' single-stranded (ss)-(dT)(n) flanking regions (tails) (n ranging from zero to 20 nt) was examined by competition with a fluorescently labeled reference DNA and by isothermal titration calorimetry. The presence of Mg(2+) enhances the affinity of RecBC for DNA ends possessing 3' or 5'-(dT)(n) ssDNA tails with n<6 nt, with the relative enhancement decreasing as n increases from zero to six nt. No effect of Mg(2+) was observed for either the binding constant or the enthalpy of binding (Delta H(obs)) for RecBC binding to DNA with ssDNA tail lengths, n>or=6 nucleotides. Upon RecBC binding to a blunt duplex DNA end in the presence of Mg(2+), at least 4 bp at the duplex end become accessible to KMnO(4) attack, consistent with melting of the duplex end. Since Mg(2+) has no effect on the affinity or binding enthalpy of RecBC for a DNA end that is fully pre-melted, this suggests that the role of Mg(2+) is to overcome a kinetic barrier to melting of the DNA by RecBC and presumably also by RecBCD. These data also provide an accurate estimate (Delta H(obs)=8+/-1 kcal/mol) for the average enthalpy change associated with the melting of a DNA base-pair by RecBC.

Multiple global conformational states of the hexameric RepA helicase of plasmid RSF1010 with different ssDNA-binding capabilities are induced by different numbers of bound nucleotides. Analytical ultracentrifugation and dynamic light scattering studies

Global conformational transitions of the hexameric RepA helicase of plasmid RSF1010, induced by the nucleoside tri and di-phosphate binding, have been examined using analytical ultracentrifugation and dynamic light scattering techniques. The global structure of the RepA hexamer in solution, modeled as an oblate ellipsoid of revolution, is very different from its crystal structure, with the axial ratio of the ellipsoid being approximately 4.5 as compared to only approximately 2.4 in the crystal structure. The large axial ratio and the experimentally determined partial specific volume strongly suggest that, in solution, the diameter of the cross-channel of the hexamer is larger than approximately 17 A seen in the crystal. The global conformation of the helicase is modulated by a specific number of bound nucleotides. The enzyme exists in at least four conformational states, occurring sequentially as a function of the number of bound cofactors. These conformational states are different for ADP, as compared to beta,gamma-imidoadenosine 5'-triphosphate (AMP-PNP). Modulation of the global structure is separated into two phases, different for complexes with up to three bound nucleotides, from the effect observed at the saturating level of cofactors. This heterogeneity indicates different functional roles of the two modulation processes. Nucleotide control of helicase - single-stranded (ss)DNA interactions occurs through affecting the enzyme structure and the ssDNA affinity prior to DNA binding. Only one conformational state of the helicase, with two AMP-PNP molecules bound, has dramatically higher ssDNA-affinities than the complexes with ADP. Moreover the same state also has an increased site-size of the enzyme - ssDNA complexes. The implications of these findings for functional activities of a hexameric helicase are discussed.

Interactions of the DNA polymerase X of African swine fever virus with double-stranded DNA. Functional structure of the complex

Interactions of the polymerase X of African swine fever virus with the double-stranded DNA (dsDNA) have been studied with fluorescent dsDNA oligomers, using quantitative fluorescence titrations, analytical ultracentrifugation, and fluorescence energy transfer techniques. Studies with unmodified dsDNAs were performed, using competition titration method. ASV pol X binds the dsDNA with a site-size of n=10(+/-2) base-pairs, which is significantly shorter than the total site-size of 16(+/-2) nucleotides of the enzyme-ssDNA complex. The small site size indicates that the enzyme binds the dsDNA exclusively using the proper DNA-binding subsite. Fluorescence energy transfer studies between the tryptophan residue W92 and the acceptor, located at the 5' or 3' end of the dsDNA, suggest strongly that the proper DNA-binding subsite is located on the non-catalytic C-terminal domain. Moreover, intrinsic interactions with the dsDNA 10-mer or 20-mer are accompanied by the same net number of ions released, independent of the length of the DNA, indicating the same length of the DNA engaged in the complex. The dsDNA intrinsic affinity is about two orders of magnitude higher than the ssDNA affinity, indicating that the proper DNA-binding subsite is, in fact, the specific dsDNA-binding site. Surprisingly, ASFV pol X binds the dsDNA with significant positive cooperativity, which results from protein-protein interactions. Cooperative interactions are accompanied by the net ion release, with anions participating in the ion-exchange process. The significance of these results for ASFV pol X activity in the recognition of damaged DNA is discussed.

Probing 3'-ssDNA loop formation in E. coli RecBCD/RecBC-DNA complexes using non-natural DNA: a model for "Chi" recognition complexes

The equilibrium binding of Escherichia coli RecBC and RecBCD helicases to duplex DNA ends containing varying lengths of polyethylene glycol (PEG) spacers within pre-formed 3'-single-stranded (ss) DNA ((dT)n) tails was studied. These studies were designed to test a previous proposal that the 3'-(dT)n tail can be looped out upon binding RecBC and RecBCD for 3'-ssDNA tails with n>or=6 nucleotides. Equilibrium binding of protein to unlabeled DNA substrates with ends containing PEG-substituted 3'-ssDNA tails was examined by competition with a Cy3-labeled reference DNA which undergoes a Cy3 fluorescence enhancement upon protein binding. We find that the binding affinities of both RecBC and RecBCD for a DNA end are unaffected upon substituting PEG for the ssDNA between the sixth and the final two nucleotides of the 3'-(dT)n tail. However, placing PEG at the end of the 3'-(dT)n tail increases the binding affinities to their maximum values (i.e. the same as binding constants for RecBC or RecBCD to a DNA end with only a 3'-(dT)6 tail). Equilibrium binding studies of a RecBC mutant containing a nuclease domain deletion, RecB(Deltanuc)C, suggest that looping of the 3'-tail (when n>or=6 nucleotides) occurs even in the absence of the RecB nuclease domain, although the nuclease domain stabilizes such loop formation. Computer modeling of the RecBCD-DNA complexes suggests that the loop in the 3'-ssDNA tail may form at the RecB/RecC interface. Based on these results we suggest a model for how a loop in the 3'-ssDNA tail might form upon encounter of a "Chi" recognition sequence during unwinding of DNA by the RecBCD helicase.

Replication termination in Escherichia coli: structure and antihelicase activity of the Tus-Ter complex

The arrest of DNA replication in Escherichia coli is triggered by the encounter of a replisome with a Tus protein-Ter DNA complex. A replication fork can pass through a Tus-Ter complex when traveling in one direction but not the other, and the chromosomal Ter sites are oriented so replication forks can enter, but not exit, the terminus region. The Tus-Ter complex acts by blocking the action of the replicative DnaB helicase, but details of the mechanism are uncertain. One proposed mechanism involves a specific interaction between Tus-Ter and the helicase that prevents further DNA unwinding, while another is that the Tus-Ter complex itself is sufficient to block the helicase in a polar manner, without the need for specific protein-protein interactions. This review integrates three decades of experimental information on the action of the Tus-Ter complex with information available from the Tus-TerA crystal structure. We conclude that while it is possible to explain polar fork arrest by a mechanism involving only the Tus-Ter interaction, there are also strong indications of a role for specific Tus-DnaB interactions. The evidence suggests, therefore, that the termination system is more subtle and complex than may have been assumed. We describe some further experiments and insights that may assist in unraveling the details of this fascinating process.

DNA polymerase X from African swine fever virus: quantitative analysis of the enzyme-ssDNA interactions and the functional structure of the complex

Interactions of polymerase X from African swine fever virus with single-stranded DNA (ssDNA) have been studied, using quantitative fluorescence titration and analytical ultracentrifugation techniques. Experiments were performed with a fluorescent etheno-derivative of ssDNA oligomers. Studies of unmodified ssDNA oligomers were carried out using the competition titration method. The total site-size of the pol X-ssDNA complex is 16(+/-1) nucleotide residues. The large total ssDNA-binding site has a complex heterogeneous structure. It contains the proper ssDNA-binding site that encompasses only 7(+/-1) residues. As the length of the ssDNA increases, the enzyme engages an additional binding area in interactions with the DNA, at a distance of approximately 7-8 nucleotides from the proper site, which is located asymmetrically within the polymerase molecule. As a result, the net ion release accompanying the interactions with the DNA, increases from approximately 1 for the proper DNA-binding site to approximately 6 for the total DNA-binding site. Unlike in the case of the mammalian polymerase beta that belongs to the same polymerase X family, the DNA-binding areas within the total DNA-binding site of pol X are not autonomous. Consequently, the enzyme does not form different binding modes with different numbers of occluded nucleotide residues, although the interacting areas are structurally separated. The statistical thermodynamic model that accounts for the engagement of the proper and the total DNA-binding site in interactions with the DNA provides an excellent description of the binding process. Pol X binds the ssDNA without detectable cooperativity and with very modest base specificity.

Energetics of DNA end binding by E.coli RecBC and RecBCD helicases indicate loop formation in the 3'-single-stranded DNA tail

We examined the equilibrium binding of Escherichia coli RecBC and RecBCD helicases to duplex DNA ends possessing pre-existing single-stranded (ss) DNA ((dT)(n)) tails varying in length (n=0 to 20 nucleotides) in order to determine the contributions of both the 3' and 5' single strands to the energetics of complex formation. Protein binding was monitored by the fluorescence enhancement of a reference DNA labeled at its end with a Cy3 fluorophore. Binding to unlabeled DNA was examined by competition titrations with the Cy3-labeled reference DNA. The affinities of both RecBC and RecBCD increase as the 3'-(dT)(n) tail length increases from zero to six nucleotides, but then decrease dramatically as the 3'-(dT)(n) tail length increases from six to 20 nucleotides. Isothermal titration calorimetry experiments with RecBC show that the binding enthalpy is negative and increases in magnitude with increasing 3'-(dT)(n) tail length up to n=6 nucleotides, but remains constant for n > or =6. Hence, the decrease in binding affinity for 3'-(dT)(n) tail lengths with n > or =6 is due to an unfavorable entropic contribution. RecBC binds optimally to duplex DNA with (dT)6 tails on both the 3' and 5'-ends while RecBCD prefers duplex DNA with 3'-(dT)6 and 5'-(dT)10 tails. These data suggest that both RecBC and RecBCD helicases can destabilize or "melt out" six base-pairs upon binding to a blunt DNA duplex end in the absence of ATP. These results also provide the first evidence that a loop in the 3'-ssDNA tail can form upon binding of RecBC or RecBCD with DNA duplexes containing a pre-formed 3'-ssDNA tail with n > or =6 nucleotides. Such loops may be representative of those hypothesized to form upon interaction of a Chi site contained within the unwound 3' ss-DNA tail with the RecC subunit during DNA unwinding.

Unzipping mechanism of the double-stranded DNA unwinding by a hexameric helicase: the effect of the 3' arm and the stability of the dsDNA on the unwinding activity of the Escherichia coli DnaB helicase

The effect of two structural elements of a replication DNA fork substrate, the length of the 3' arm of the fork and the stability of the double-stranded DNA (dsDNA) part, on the kinetics of the dsDNA unwinding by the Escherichia coli hexameric helicase DnaB protein has been examined under single turnover conditions using the rapid quench-flow technique. The length of the 3' arm of the replication fork, i.e. the number of nucleotides in the arm, is a major structural factor that controls the unwinding rate and processivity of the helicase. The data show the existence of an optimal length of the 3' arm where there is the highest unwinding rate and processivity, indicating that during the unwinding process, the helicase transiently interacts with the 3' arm at a specific distance on the arm with respect to the duplex part of the DNA. Moreover, the area on the enzyme that engages in interactions has also a discrete size. For DNA substrates with the 3' arm containing 14, or less, nucleotide residues, the DnaB helicase becomes a completely distributive enzyme. However, the 3' arm is not a "specific activating cofactor" in the unwinding reaction. Rather, the 3' arm plays a role as a mechanical fulcrum for the enzyme, necessary to provide support for the advancing large helicase molecule on the opposite strand of the DNA. Binding of ATP is necessary to engage the 3' arm with the DnaB helicase, but it does not change the initial distribution of complexes of the enzyme with the DNA fork substrate. Stability of the dsDNA has a significant effect on the unwinding rate and processivity. The unwinding rate constant is a decreasing linear function of the fractional content of GC base-pairs in the dsDNA, indicating that the activation of the unwinding step is proportional to the stability of the nucleic acid.

Unzipping mechanism of the double-stranded DNA unwinding by a hexameric helicase: quantitative analysis of the rate of the dsDNA unwinding, processivity and kinetic step-size of the Escherichia coli DnaB helicase using rapid quench-flow method

Kinetics of the double-stranded (ds) DNA unwinding by the Escherichia coli replicative helicase DnaB protein has been examined under single-turnover conditions using the chemical quench-flow technique. The unwinding reaction proceeds through an initial conformational transition followed by the unwinding catalytic steps and the release of the single-stranded (ss) DNA. Analyses of the reaction as a function of the number of base-pairs in the dsDNA reveal that the number of catalytic steps is not strictly proportional to the length of the dsDNA. As the helicase approaches the end of the substrate, the remaining approximately 11 bp of the DNA melts without catalytic participation of the enzyme. The kinetic step-size of the DnaB helicase, i.e. the number of the base-pairs unwound in a single catalytic step is only 1.4(+/- 0.2). The low value of the step-size indicates that the helicase unwinds a single base-pair in a single catalytic step. Thus, the DnaB helicase unzips the dsDNA in a reverse process to the zipping mechanism of the non-enzymatic double helix formation. The protein is a fast helicase that at 25 degrees C unwinds approximately 291 bp/s, much faster than previously thought, and the unwinding rate can be much higher at higher temperatures. However, the ATP-state of the enzyme has an increased dissociation rate, resulting in only a moderate unwinding processivity, P = 0.89(+/- 0.03), little dependent on the temperature. The conformational transition of the DnaB helicase-DNA complex, preceding the unwinding, is an intrinsic transition of the enzyme from the stationary conformation to the ATP-state of the helicase.

Interactions of the RepA helicase hexamer of plasmid RSF1010 with the ssDNA. Quantitative analysis of stoichiometries, intrinsic affinities, cooperativities, and heterogeneity of the total ssDNA-binding site

Interactions between the replicative RepA helicase hexamer of plasmid RSF1010 with the single-stranded DNA (ssDNA) have been studied, using the quantitative fluorescence titration, analytical sedimentation velocity, and sedimentation equilibrium techniques. Experiments were performed with fluorescein-labeled ssDNA oligomers. Studies with unmodified ssDNA oligomers were accomplished using the macromolecular competition titration method. Analyses of RepA helicase interactions with a series of the ssDNA provide direct evidence that the total site-size of the RepA hexamer-ssDNA complex is 19 +/- 1 nucleotide residues. The total ssDNA-binding site of the hexamer has a heterogeneous structure. Part of the total binding site constitutes the proper ssDNA-binding site of the enzyme, an area that possesses strong ssDNA-binding capability and encompasses only 8 +/- 1 residues of the ssDNA. The statistical effect on the macroscopic binding constant for the proper ssDNA-binding site indicates that it is structurally separated from the remaining part of the total ssDNA-binding site. Engagement in interactions with the ssDNA is accompanied by net ion release. Moreover, the proper ssDNA-binding site shows little base specificity. On the other hand, with long ssDNA oligomers, the entire total ssDNA-binding site of the RepA hexamer engages in interactions with the ssDNA resulting in a dramatic change in the nature of interactions with the nucleic acid. The association includes an uptake of ions by the protein. Moreover, unlike the proper-ssDNA-binding site, the total binding site shows a significant preference for pyrimidine oligomers. In this aspect, the RepA helicase is different from the Escherichia coli DnaB hexamer that shows large preference for purine homo-oligomers. In similar solution conditions, the ssDNA intrinsic affinity of the RepA hexamer is similar to the intrinsic affinity of the DnaB helicase. The RepA helicase binds to ssDNA oligomers that can accept more than one RepA hexamer with significant positive cooperative interactions.

Interactions of the Escherichia coli DnaB helicase hexamer with the replication factor the DnaC protein. Effect of nucleotide cofactors and the ssDNA on protein-protein interactions and the topology of the complex

Quantitative studies of interactions between the Escherichia coli replication factor DnaC protein and the DnaB helicase have been performed using sedimentation velocity and fluorescence energy transfer techniques. The applied novel analysis of the sedimentation data allows us to construct thermodynamic rigorous binding isotherms without any assumption as to the relationship between the observed molecular property of the complexes formed, the average sedimentation coefficient, or the degree of binding. Experiments have been performed with the fluorescein-modified DnaB helicase, which allows an exclusive monitoring of the DnaB-DnaC complex formation. The DnaC binding to the unmodified helicase has been characterized in competition experiments. The data establish that, in the presence of the ATP analog AMP-PNP, or ADP, a maximum of six DnaC monomers bind cooperatively to the DnaB hexamer. The positive cooperative interactions are limited to the two neighboring DnaC molecules. Analyses using a statistical thermodynamic hexagon model indicate that, under the solution conditions examined, the affinity is characterized by the intrinsic binding constant K=1.4(+/-0.5)x10(5)M(-1) and cooperativity parameter sigma=21+/-5. These data suggest strongly that the DnaC-DnaB complex exists in vivo as a mixture of complexes with a different number of bound DnaC molecules, although the complex with six DnaC molecules bound dominates the distribution. The DnaC nucleotide-binding site is not involved in the stabilization of the complex. Moreover, the hydrolysis of NTP bound to the helicase or the DnaC is not required for the release of the DnaC protein from the complex. The single-stranded DNA (ssDNA) bound to the helicase does not affect the DnaC protein binding. However, in the presence of the DNA, there is a significant difference in the energetics and structure of the ternary complex, DnaC-DnaB-ssDNA, formed in the presence of AMP-PNP as compared to ADP. The topology of the ternary complex DnaC-DnaB-ssDNA has been determined using the fluorescence energy transfer method. In solution, the DnaC protein-binding site is located on the large 33 kDa domain of the DnaB helicase. The significance of the results in the functioning of the DnaB helicase-DnaC protein complex is discussed.

Expanding the physiological role of the hexameric DnaB helicase

The hexameric DnaB protein is the Escherichia coli primary replicative helicase. However, recent studies indicate that this enzyme is capable of driving branch migration of a Holliday junction, acting more like an ATP-driven pump than a helicase. This offers an attractive possibility that the protein is directly involved in DNA recombination in vivo. Thus, the physiological role of the DnaB protein in DNA metabolism, and its modes of action, might be more complex than previously thought.

A Dimer of Escherichia coli UvrD is the active form of the helicase in vitro

The Escherichia coli UvrD protein is a 3' to 5' SF1 DNA helicase involved in methyl-directed mismatch repair and nucleotide excision repair of DNA. We have characterized in vitro UvrD-catalyzed unwinding of a series of 18 bp duplex DNA substrates with 3' single-stranded DNA (ssDNA) tails ranging in length from two to 40 nt. Single turnover DNA-unwinding experiments were performed using chemical quenched flow methods, as a function of both [UvrD] and [DNA] under conditions such that UvrD-DNA binding is stoichiometric. Although a single UvrD monomer binds tightly to the single-stranded/double-stranded DNA (dsDNA) junction if the 3' ssDNA tail is at least four nt, no unwinding was observed for DNA substrates with tail-lengths </=8 nt, even at high [UvrD]/[DNA] ratios. Unwinding is observed for DNA substrates with 3' ssDNA tail lengths >/=12 nt, and the unwinding amplitude displays a sigmoidal dependence on [UvrD(tot)]/[DNA(tot)]. Quantitative analysis of these data indicates that a single UvrD monomer bound at the ssDNA/dsDNA junction of any DNA substrate, independent of 3' ssDNA tail length, is not competent to fully unwind even a short 18 bp duplex DNA, and that two UvrD monomers must bind the DNA substrate in order to form a complex that is able to unwind short DNA substrates in vitro. Other proteins, including a mutant UvrD with no ATPase activity as well as a monomer of the structurally homologous E.coli Rep helicase, cannot substitute for the second UvrD monomer, suggesting a specific interaction between two UvrD monomers and that both must be able to hydrolyze ATP. Initiation of DNA unwinding in vitro appears to require a dimeric UvrD complex in which one subunit is bound to the ssDNA/dsDNA junction, while the second subunit is bound to the 3' ssDNA tail.

Energetics and specificity of Rat DNA polymerase beta interactions with template-primer and gapped DNA substrates

Interactions between rat polymerase beta (pol beta) and the template-primer, as well as gapped DNAs, were studied using the quantitative fluorescence titration technique. Stoichiometries of rat pol beta complexes with DNA substrates are much higher than stoichiometries predicted by the structures of co-crystals. The data can be understood in the context of the two single-stranded (ss)DNA-binding modes of the enzyme, the (pol beta)(16) and (pol beta)(5) binding modes, which differ by the number of nucleotides occluded by the protein. The 8-kDa domain of the enzyme engages the double-stranded (ds)DNA downstream from the primer, while the 31-kDa domain has similar affinity for the ss-ds DNA junction and the dsDNA. The affinity of rat pol beta for the gapped DNA is not affected by the size of the gap. The results indicate a plausible model for recognition of the gapped DNA by rat pol beta. The enzyme binds the ss-ds DNA junction of the gap using the 31-kDa domain. This binding induces an allosteric transition, resulting in the association of the 8-kDa domain with the dsDNA, leading to an amplification of the affinity for the gap. The 5' terminal phosphate, downstream from the primer, has little effect on the affinity, but affects the ssDNA conformation of the gap.

Recognition of template-primer and gapped DNA substrates by the human DNA polymerase beta

Interactions between human DNA polymerase beta and the template-primer, as well as gapped DNA substrates, have been studied using quantitative fluorescence titration and analytical ultracentrifugation techniques. In solution, human pol beta binds template-primer DNA substrates with a stoichiometry much higher than predicted on the basis of the crystallographic structure of the polymerase-DNA complex. The obtained stoichiometries can be understood in the context of the polymerase affinity for the dsDNA and the two ssDNA binding modes, the (pol beta)(16) and (pol beta)(5) binding modes, which differ by the number of nucleotide residues occluded by the protein in the complex. The analysis of polymerase binding to different template-primer substrates has been performed using the statistical thermodynamic model which accounts for the existence of different ssDNA binding modes and has allowed us to extract intrinsic spectroscopic and binding parameters. The data reveal that the small 8 kDa domain of the enzyme can engage the dsDNA in interactions, downstream from the primer, in both (pol beta)(16) and (pol beta)(5) binding modes. The affinity, as well as the stoichiometry of human pol beta binding to the gapped DNAs is not affected by the decreasing size of the ssDNA gap, indicating that the enzyme recognizes the ssDNA gaps of different sizes with very similar efficiency. On the basis of the obtained results we propose a plausible model for the gapped DNA recognition by human pol beta. The enzyme binds the ss/dsDNA junction of the gap, using its 31 kDa domain, with slight preference over the dsDNA. Binding only to the junction, but not to the dsDNA, induces an allosteric conformational transition of the enzyme and the entire enzyme-DNA complex which results in binding of the 8 kDa domain with the dsDNA. This, in turn, leads to the significant amplification of the enzyme affinity for the gap over the surrounding dsDNA, independent of the gap size. The presence of the 5'-terminal phosphate, downstream from the primer, has little effect on the affinity, but profoundly affects the ssDNA conformation in the complex. The significance of these results for the mechanistic model of the functioning of human pol beta is discussed.