DNA polymerase beta: pre-steady-state kinetic analysis and roles of arginine-283 in catalysis and fidelity

Zebrafish Polymerase Theta and human Polymerase Theta: orthologues with homologous function

DNA Polymerase Theta (Pol θ) is a conserved an A-family polymerase that plays an essential role in repairing double strand breaks, through micro-homology end joining, and bypassing DNA lesions, through translesion synthesis, to protect genome integrity. Despite its essential role in DNA repair, Pol θ is inherently error-prone. Recently, key loop regions were identified to play an important role in key functions of Pol θ. Here we present a comparative structure-function study of the polymerase domain of zebrafish and human Pol θ. We show that these two proteins share a large amount of sequence and structural homology. However, we identify differences in the amino acid composition within the key loop areas shown to drive characteristic Pol θ functions. Despite these differences zebrafish Pol θ still displays characteristics identify in human Pol θ, including DNA template extension in the presence of different divalent metals, microhomology-mediated end joining, and translesion synthesis. These results will support future studies looking to gain insight into Pol θ function on the basis of evolutionarily conserved features.

Melanoma-Derived DNA Polymerase Theta Variants Exhibit Altered DNA Polymerase Activity

DNA polymerase θ (Pol θ or POLQ) is primarily involved in repairing double-stranded breaks in DNA through an alternative pathway known as microhomology-mediated end joining (MMEJ) or theta-mediated end joining (TMEJ). Unlike other DNA repair polymerases, Pol θ is thought to be highly error-prone yet critical for cell survival. We have identified several POLQ gene variants from human melanoma tumors that experience altered DNA polymerase activity, including a propensity for incorrect nucleotide selection and reduced polymerization rates compared to WT Pol θ. Variants are 30-fold less efficient at incorporating a nucleotide during repair and up to 70-fold less accurate at selecting the correct nucleotide opposite a templating base. This suggests that aberrant Pol θ has reduced DNA repair capabilities and may also contribute to increased mutagenesis. Moreover, the variants were identified in established tumors, suggesting that cancer cells may use mutated polymerases to promote metastasis and drug resistance.

Melanoma-derived DNA polymerase theta variants exhibit altered DNA polymerase activity

DNA Polymerase θ (Pol θ or POLQ) is primarily involved in repairing double-stranded breaks in DNA through the alternative pathway known as microhomology-mediated end joining (MMEJ) or theta-mediated end joining (TMEJ). Unlike other DNA repair polymerases, Pol θ is thought to be highly error prone, yet critical for cell survival. We have identified several mutations in the POLQ gene from human melanoma tumors. Through biochemical analysis, we have demonstrated that all three cancer-associated variants experienced altered DNA polymerase activity including a propensity for incorrect nucleotide selection and reduced polymerization rates compared to WT Pol θ. Moreover, the variants are 30 fold less efficient at incorporating a nucleotide during repair and up to 70 fold less accurate at selecting the correct nucleotide opposite a templating base. Taken together, this suggests that aberrant Pol θ has reduced DNA repair capabilities and may also contribute to increased mutagenesis. While this may be beneficial to normal cell survival, the variants were identified in established tumors suggesting that cancer cells may use this promiscuous polymerase to its advantage to promote metastasis and drug resistance.

Structural and Molecular Kinetic Features of Activities of DNA Polymerases

DNA polymerases catalyze DNA synthesis during the replication, repair, and recombination of DNA. Based on phylogenetic analysis and primary protein sequences, DNA polymerases have been categorized into seven families: A, B, C, D, X, Y, and RT. This review presents generalized data on the catalytic mechanism of action of DNA polymerases. The structural features of different DNA polymerase families are described in detail. The discussion highlights the kinetics and conformational dynamics of DNA polymerases from all known polymerase families during DNA synthesis.

Interlocking activities of DNA polymerase β in the base excision repair pathway

Base excision repair (BER) is one of the major DNA repair pathways used to fix a myriad of cellular DNA lesions. The enzymes involved in BER, including DNA polymerase β (Polβ), have been identified and characterized, but how they act together to efficiently perform BER has not been fully understood. Through gel electrophoresis, mass spectrometry, and kinetic analysis, we discovered that the two enzymatic activities of Polβ can be interlocked, rather than functioning independently from each other, when processing DNA intermediates formed in BER. The finding prompted us to hypothesize a modified BER pathway. Through conventional and time-resolved X-ray crystallography, we solved 11 high-resolution crystal structures of cross-linked Polβ complexes and proposed a detailed chemical mechanism for Polβ’s 5′-deoxyribose-5-phosphate lyase activity.

Base excision repair (BER) is a major cellular pathway for DNA damage repair. During BER, DNA polymerase β (Polβ) is hypothesized to first perform gap-filling DNA synthesis by its polymerase activity and then cleave a 5′-deoxyribose-5-phosphate (dRP) moiety via its dRP lyase activity. Through gel electrophoresis and kinetic analysis of partial BER reconstitution, we demonstrated that gap-filling DNA synthesis by the polymerase activity likely occurred after Schiff base formation but before β-elimination, the two chemical reactions catalyzed by the dRP lyase activity. The Schiff base formation and β-elimination intermediates were trapped by sodium borohydride reduction and identified by mass spectrometry and X-ray crystallography. Presteady-state kinetic analysis revealed that cross-linked Polβ (i.e., reduced Schiff base) exhibited a 17-fold higher polymerase efficiency than uncross-linked Polβ. Conventional and time-resolved X-ray crystallography of cross-linked Polβ visualized important intermediates for its dRP lyase and polymerase activities, leading to a modified chemical mechanism for the dRP lyase activity. The observed interlocking enzymatic activities of Polβ allow us to propose an altered mechanism for the BER pathway, at least under the conditions employed. Plausibly, the temporally coordinated activities at the two Polβ active sites may well be the reason why Polβ has both active sites embedded in a single polypeptide chain. This proposed pathway suggests a corrected facet of BER and DNA repair, and may enable alternative chemical strategies for therapeutic intervention, as Polβ dysfunction is a key element common to several disorders.

History of DNA polymerase β X-ray crystallography

DNA polymerase β (Pol β) is an essential mammalian enzyme involved in the repair of DNA damage during the base excision repair (BER) pathway. In hopes of faithfully restoring the coding potential to damaged DNA during BER, Pol β first uses a lyase activity to remove the 5'-deoxyribose phosphate moiety from a nicked BER intermediate, followed by a DNA synthesis activity to insert a nucleotide triphosphate into the resultant 1-nucleotide gapped DNA substrate. This DNA synthesis activity of Pol β has served as a model to characterize the molecular steps of the nucleotidyl transferase mechanism used by mammalian DNA polymerases during DNA synthesis. This is in part because Pol β has been extremely amenable to X-ray crystallography, with the first crystal structure of apoenzyme rat Pol β published in 1994 by Dr. Samuel Wilson and colleagues. Since this first structure, the Wilson lab and colleagues have published an astounding 267 structures of Pol β that represent different liganded states, conformations, variants, and reaction intermediates. While many labs have made significant contributions to our understanding of Pol β, the focus of this article is on the long history of the contributions from the Wilson lab. We have chosen to highlight select seminal Pol β structures with emphasis on the overarching contributions each structure has made to the field.

Molecular and structural characterization of oxidized ribonucleotide insertion into DNA by human DNA polymerase β

During oxidative stress, inflammation, or environmental exposure, ribo- and deoxyribonucleotides are oxidatively modified. 8-Oxo-7,8-dihydro-2'-guanosine (8-oxo-G) is a common oxidized nucleobase whose deoxyribonucleotide form, 8-oxo-dGTP, has been widely studied and demonstrated to be a mutagenic substrate for DNA polymerases. Guanine ribonucleotides are analogously oxidized to r8-oxo-GTP, which can constitute up to 5% of the rGTP pool. Because ribonucleotides are commonly misinserted into DNA, and 8-oxo-G causes replication errors, we were motivated to investigate how the oxidized ribonucleotide is utilized by DNA polymerases. To do this, here we employed human DNA polymerase β (pol β) and characterized r8-oxo-GTP insertion with DNA substrates containing either a templating cytosine (nonmutagenic) or adenine (mutagenic). Our results show that pol β has a diminished catalytic efficiency for r8-oxo-GTP compared with canonical deoxyribonucleotides but that r8-oxo-GTP is inserted mutagenically at a rate similar to those of other common DNA replication errors (i.e. ribonucleotide and mismatch insertions). Using FRET assays to monitor conformational changes of pol β with r8-oxo-GTP, we demonstrate impaired pol β closure that correlates with a reduced insertion efficiency. X-ray crystallographic analyses revealed that, similar to 8-oxo-dGTP, r8-oxo-GTP adopts an anti conformation opposite a templating cytosine and a syn conformation opposite adenine. However, unlike 8-oxo-dGTP, r8-oxo-GTP did not form a planar base pair with either templating base. These results suggest that r8-oxo-GTP is a potential mutagenic substrate for DNA polymerases and provide structural insights into how r8-oxo-GTP is processed by DNA polymerases.

Structure and function relationships in mammalian DNA polymerases

DNA polymerases are vital for the synthesis of new DNA strands. Since the discovery of DNA polymerase I in Escherichia coli, a diverse library of mammalian DNA polymerases involved in DNA replication, DNA repair, antibody generation, and cell checkpoint signaling has emerged. While the unique functions of these DNA polymerases are differentiated by their association with accessory factors and/or the presence of distinctive catalytic domains, atomic resolution structures of DNA polymerases in complex with their DNA substrates have revealed mechanistic subtleties that contribute to their specialization. In this review, the structure and function of all 15 mammalian DNA polymerases from families B, Y, X, and A will be reviewed and discussed with special emphasis on the insights gleaned from recently published atomic resolution structures.

Thermococcus sp. 9°N DNA polymerase exhibits 3'-esterase activity that can be harnessed for DNA sequencing

It was reported in 1995 that T7 and Taq DNA polymerases possess 3'-esterase activity, but without follow-up studies. Here we report that the 3'-esterase activity is intrinsic to the Thermococcus sp. 9°N DNA polymerase, and that it can be developed into a continuous method for DNA sequencing with dNTP analogs carrying a 3'-ester with a fluorophore. We first show that 3'-esterified dNTP can be incorporated into a template-primer DNA, and solve the crystal structures of the reaction intermediates and products. Then we show that the reaction can occur continuously, modulated by active site residues Tyr409 and Asp542. Finally, we use 5'-FAM-labeled primer and esterified dNTP with a dye to show that the reaction can proceed to ca. 450 base pairs, and that the intermediates of many individual steps can be identified. The results demonstrate the feasibility of a 3'-editing based DNA sequencing method that could find practical applications after further optimization.

Molecular basis for the faithful replication of 5-methylcytosine and its oxidized forms by DNA polymerase β

DNA methylation is an epigenetic mark that regulates gene expression in mammals. One method of methylation removal is through ten-eleven translocation-catalyzed oxidation and the base excision repair pathway. The iterative oxidation of 5-methylcytosine catalyzed by ten-eleven translocation enzymes produces three oxidized forms of cytosine: 5-hydroxmethylcytosine, 5-formylcytosine, and 5-carboxycytosine. The effect these modifications have on the efficiency and fidelity of the base excision repair pathway during the repair of opposing base damage, and in particular DNA polymerization, remains to be elucidated. Using kinetic assays, we show that the catalytic efficiency for the incorporation of dGTP catalyzed by human DNA polymerase β is not affected when 5-methylcytosine, 5-hydroxmethylcytosine, and 5-formylcytosine are in the DNA template. In contrast, the catalytic efficiency of dGTP insertion decreases ∼20-fold when 5-carboxycytosine is in the templating position, as compared with unmodified cytosine. However, DNA polymerase fidelity is unaltered when these modifications are in the templating position. Structural analysis reveals that the methyl, hydroxymethyl, and formyl modifications are easily accommodated within the polymerase active site. However, to accommodate the carboxyl modification, the phosphate backbone on the templating nucleotide shifts ∼2.5 Å to avoid a potential steric/repulsive clash. This altered conformation is stabilized by lysine 280, which makes a direct interaction with the carboxyl modification and the phosphate backbone of the templating strand. This work provides the molecular basis for the accommodation of epigenetic base modifications in a polymerase active site and suggests that these modifications are not mutagenically copied during base excision repair.

Honokiol Inhibits DNA Polymerases β and λ and Increases Bleomycin Sensitivity of Human Cancer Cells

A major concept to sensitize cancer cells to DNA damaging agents is by inhibiting proteins in the DNA repair pathways. X-family DNA polymerases play critical roles in both base excision repair (BER) and nonhomologous end joining (NHEJ). In this study, we examined the effectiveness of honokiol to inhibit human DNA polymerase β (pol β), which is involved in BER, and DNA polymerase λ (pol λ), which is involved in NHEJ. Kinetic analysis with purified polymerases showed that honokiol inhibited DNA polymerase activity. The inhibition mode for the polymerases was a mixed-function noncompetitive inhibition with respect to the substrate, dCTP. The X-family polymerases, pol β and pol λ, were slightly more sensitive to inhibition by honokiol based on the Ki value of 4.0 μM for pol β, and 8.3 μM for pol λ, while the Ki values for pol η and Kf were 20 and 26 μM, respectively. Next we extended our studies to determine the effect of honokiol on the cytotoxicity of bleomycin and temozolomide in human cancer cell lines A549, MCF7, PANC-1, UACC903, and normal blood lymphocytes (GM12878). Bleomycin causes both single strand DNA damage that is repaired by BER and double strand breaks that are repaired by NHEJ, while temozolomide causes methylation damage repaired by BER and O6-alkylguanine-DNA alkyltransferase. The greatest effects were found with the honokiol and bleomycin combination in MCF7, PANC-1, and UACC903 cells, in which the EC50 values were decreased 10-fold. The temozolomide and honokiol combination was less effective; the EC50 values decreased three-fold due to the combination. It is hypothesized that the greater effect of honokiol on bleomycin is due to inhibition of the repair of the single strand and double strand damage. The synergistic activity shown by the combination of bleomycin and honokiol suggests that they can be used as combination therapy for treatment of cancer, which will decrease the therapeutic dosage and side effects of bleomycin.

Induced Fit in the Selection of Correct versus Incorrect Nucleotides by DNA Polymerase β

DNA polymerase β (Pol β) repairs single-nucleotide gapped DNA (sngDNA) by enzymatic incorporation of the Watson-Crick partner nucleotide at the gapped position opposite the templating nucleotide. The process by which the matching nucleotide is incorporated into a sngDNA sequence has been relatively well-characterized, but the process of discrimination from nucleotide misincorporation remains unclear. We report here NMR spectroscopic characterization of full-length, uniformly labeled Pol β in apo, sngDNA-bound binary, and ternary complexes containing matching and mismatching nucleotide. Our data indicate that, while binding of the correct nucleotide to the binary complex induces chemical shift changes consistent with the process of enzyme closure, the ternary Pol β complex containing a mismatching nucleotide exhibits no such changes and appears to remain in an open, unstable, binary-like conformation. Our findings support an induced-fit mechanism for polymerases in which a closed ternary complex can only be achieved in the presence of matching nucleotide.

Nucleotide binding interactions modulate dNTP selectivity and facilitate 8-oxo-dGTP incorporation by DNA polymerase lambda

8-Oxo-7,8,-dihydro-2'-deoxyguanosine triphosphate (8-oxo-dGTP) is a major product of oxidative damage in the nucleotide pool. It is capable of mispairing with adenosine (dA), resulting in futile, mutagenic cycles of base excision repair. Therefore, it is critical that DNA polymerases discriminate against 8-oxo-dGTP at the insertion step. Because of its roles in oxidative DNA damage repair and non-homologous end joining, DNA polymerase lambda (Pol λ) may frequently encounter 8-oxo-dGTP. Here, we have studied the mechanisms of 8-oxo-dGMP incorporation and discrimination by Pol λ. We have solved high resolution crystal structures showing how Pol λ accommodates 8-oxo-dGTP in its active site. The structures indicate that when mispaired with dA, the oxidized nucleotide assumes the mutagenic syn-conformation, and is stabilized by multiple interactions. Steady-state kinetics reveal that two residues lining the dNTP binding pocket, Ala(510) and Asn(513), play differential roles in dNTP selectivity. Specifically, Ala(510) and Asn(513) facilitate incorporation of 8-oxo-dGMP opposite dA and dC, respectively. These residues also modulate the balance between purine and pyrimidine incorporation. Our results shed light on the mechanisms controlling 8-oxo-dGMP incorporation in Pol λ and on the importance of interactions with the incoming dNTP to determine selectivity in family X DNA polymerases.

One severe acute respiratory syndrome coronavirus protein complex integrates processive RNA polymerase and exonuclease activities

In addition to members causing milder human infections, the Coronaviridae family includes potentially lethal zoonotic agents causing severe acute respiratory syndrome (SARS) and the recently emerged Middle East respiratory syndrome. The ∼30-kb positive-stranded RNA genome of coronaviruses encodes a replication/transcription machinery that is unusually complex and composed of 16 nonstructural proteins (nsps). SARS-CoV nsp12, the canonical RNA-dependent RNA polymerase (RdRp), exhibits poorly processive RNA synthesis in vitro, at odds with the efficient replication of a very large RNA genome in vivo. Here, we report that SARS-CoV nsp7 and nsp8 activate and confer processivity to the RNA-synthesizing activity of nsp12. Using biochemical assays and reverse genetics, the importance of conserved nsp7 and nsp8 residues was probed. Whereas several nsp7 mutations affected virus replication to a limited extent, the replacement of two nsp8 residues (P183 and R190) essential for interaction with nsp12 and a third (K58) critical for the interaction of the polymerase complex with RNA were all lethal to the virus. Without a loss of processivity, the nsp7/nsp8/nsp12 complex can associate with nsp14, a bifunctional enzyme bearing 3'-5' exoribonuclease and RNA cap N7-guanine methyltransferase activities involved in replication fidelity and 5'-RNA capping, respectively. The identification of this tripartite polymerase complex that in turn associates with the nsp14 proofreading enzyme sheds light on how coronaviruses assemble an RNA-synthesizing machinery to replicate the largest known RNA genomes. This protein complex is a fascinating example of the functional integration of RNA polymerase, capping, and proofreading activities.

Ultrafast water dynamics at the interface of the polymerase-DNA binding complex

DNA polymerases slide on DNA during replication, and the interface must be mobile for various conformational changes. The role of lubricant interfacial water is not understood. In this report, we systematically characterize the water dynamics at the interface and in the active site of a tight binding polymerase (pol β) in its binary complex and ternary state using tryptophan as a local optical probe. Using femtosecond spectroscopy, we observed that upon DNA recognition the surface hydration water is significantly confined and becomes bound water at the interface, but the dynamics are still ultrafast and occur on the picosecond time scale. These interfacial water molecules are not trapped but are mobile in the heterogeneous binding nanospace. Combining our findings with our previous observation of ultrafast water motions at the interface of a loose binding polymerase (Dpo4), we conclude that the binding interface is dynamic and the water molecules in various binding clefts, channels, and caves are mobile and even fluid with different levels of mobility for loose or tight binding polymerases. Such a dynamic interface should be general to all DNA polymerase complexes to ensure the biological function of DNA synthesis.

Decision-making during NHEJ: a network of interactions in human Polμ implicated in substrate recognition and end-bridging

Human Polμ is a DNA polymerase belonging to the X family that has been implicated in the non-homologous end-joining (NHEJ) pathway during repair of double-strand breaks in DNA. Loop1 is a flexible piece of Polμ which has a critical role during terminal transferase and end-joining activities: it acts as a pseudo-template when the template strand is discontinuous or unavailable, whilst diffusing away if present to avoid steric clashes. Mutational analysis and inspection of the 3D structures available allowed us to identify a network of residues in charge of sensing the presence or absence of discontinuities in the template strand, which will in turn determine the final position adopted by Loop1. This network is formed by the previously uncharacterized thumb mini-loop (NSH motif) and the positively charged helix N, which contribute to the correct positioning of Loop1 and to juxtapose the discontinuous template strand during NHEJ of incompatible ends. Accordingly, single mutation of specific conserved residues in these motifs, whilst irrelevant in most of the cases for gap filling, largely affected terminal transferase and end-joining activities. Other point mutations in the ‘hinges’ of Loop1, such as residues Phe³⁸⁵ or Phe³⁸⁹, corroborated the flexibility requirements of this motif.

Recent insight into the kinetic mechanisms and conformational dynamics of Y-Family DNA polymerases

The kinetic mechanisms by which DNA polymerases catalyze DNA replication and repair have long been areas of active research. Recently discovered Y-family DNA polymerases catalyze the bypass of damaged DNA bases that would otherwise block replicative DNA polymerases and stall replication forks. Unlike DNA polymerases from the five other families, the Y-family DNA polymerases have flexible, solvent-accessible active sites that are able to tolerate various types of damaged template bases and allow for efficient lesion bypass. Their promiscuous active sites, however, also lead to fidelities that are much lower than those observed for other DNA polymerases and give rise to interesting mechanistic properties. Additionally, the Y-family DNA polymerases have several other unique structural features and undergo a set of conformational changes during substrate binding and catalysis different from those observed for replicative DNA polymerases. In recent years, pre-steady-state kinetic methods have been extensively employed to reveal a wealth of information about the catalytic properties of these fascinating noncanonical DNA polymerases. Here, we review many of the recent findings on the kinetic mechanisms of DNA polymerization with undamaged and damaged DNA substrates by the Y-family DNA polymerases, and the conformational dynamics employed by these error-prone enzymes during catalysis.

Optimal and variant metal-ion routes in DNA polymerase β's conformational pathways

To interpret recent structures of the R283K mutant of human DNA repair enzyme DNA polymerase β (pol β) differing in the number of Mg(2+) ions, we apply transition path sampling (TPS) to assess the effect of differing ion placement on the transition from the open one-metal to the closed two-metal state. We find that the closing pathway depends on the initial ion position, both in terms of the individual transition states and associated energies. The energy barrier of the conformational pathway varies from 25 to 58 kJ/mol, compared to the conformational energy barrier of 42 kJ/mol for the wild-type pol β reported previously. Moreover, we find a preferred ion route located in the center of the enzyme, parallel to the DNA. Within this route, the conformational pathway is similar to that of the overall open to closed transition of pol β, but outside it, especially when the ion starts near active site residues Arg258 and Asp190, the conformational pathway diverges significantly. Our findings should apply generally to pol β, since R283K is relatively far from the active site; further experimental and computational work are required to confirm this. Our studies also underscore the common feature that less active mutants have less stable closed states than their open states, in marked contrast to the wild-type enzyme, where the closed state is significantly more stable than the open form.

Structural changes in the hydrophobic hinge region adversely affect the activity and fidelity of the I260Q mutator DNA polymerase β

The I260Q variant of DNA polymerase β is an efficient mutator polymerase with fairly indiscriminate misincorporation activities opposite all template bases. Previous modeling studies have suggested that I260Q harbors structural variations in its hinge region. Here, we present the crystal structures of wild type and I260Q rat polymerase β in the presence and absence of substrates. Both the I260Q apoenzyme structure and the closed ternary complex with double-stranded DNA and ddTTP show ordered water molecules in the hydrophobic hinge near Gln260, whereas this is not the case in the wild type polymerase. Compared to wild type polymerase β ternary complexes, there are subtle movements around residues 260, 272, 295, and 296 in the mutant. The rearrangements in this region, coupled with side chain movements in the immediate neighborhood of the dNTP-binding pocket, namely, residues 258 and 272, provide an explanation for the altered activity and fidelity profiles observed in the I260Q mutator polymerase.

"Gate-keeper" residues and active-site rearrangements in DNA polymerase μ help discriminate non-cognate nucleotides

Incorporating the cognate instead of non-cognate substrates is crucial for DNA polymerase function. Here we analyze molecular dynamics simulations of DNA polymerase μ (pol μ) bound to different non-cognate incoming nucleotides including A:dCTP, A:dGTP, A(syn):dGTP, A:dATP, A(syn):dATP, T:dCTP, and T:dGTP to study the structure-function relationships involved with aberrant base pairs in the conformational pathway; while a pol μ complex with the A:dTTP base pair is available, no solved non-cognate structures are available. We observe distinct differences of the non-cognate systems compared to the cognate system. Specifically, the motions of active-site residue His329 and Asp330 distort the active site, and Trp436, Gln440, Glu443 and Arg444 tend to tighten the nucleotide-binding pocket when non-cognate nucleotides are bound; the latter effect may further lead to an altered electrostatic potential within the active site. That most of these “gate-keeper” residues are located farther apart from the upstream primer in pol μ, compared to other X family members, also suggests an interesting relation to pol μ's ability to incorporate nucleotides when the upstream primer is not paired. By examining the correlated motions within pol μ complexes, we also observe different patterns of correlations between non-cognate systems and the cognate system, especially decreased interactions between the incoming nucleotides and the nucleotide-binding pocket. Altered correlated motions in non-cognate systems agree with our recently proposed hybrid conformational selection/induced-fit models. Taken together, our studies propose the following order for difficulty of non-cognate system insertions by pol μ: T:dGTP<A(syn):dATP<T:dCTP<A:dGTP<A(syn):dGTP<A:dCTP<A:dATP. This sequence agrees with available kinetic data for non-cognate nucleotide insertions, with the exception of A:dGTP, which may be more sensitive to the template sequence. The structures and conformational aspects predicted here are experimentally testable.

DNA polymerase μ (pol μ) is an enzyme that participates in DNA repair and thus has a central role in maintaining the integrity of genetic information. To efficiently repair the DNA, discriminating the cognate instead of non-cognate nucleotides (“fidelity-checking”) is required. Here we analyze molecular dynamics simulations of pol μ bound to different non-cognate nucleotides to study the structure-function relationships involved in the fidelity-checking mechanism of pol μ on the atomic level. Our results suggest that His329, Asp330, Trp436, Gln440, Glu443, and Arg444 are of great importance for pol μ's fidelity-checking mechanism. We also observe altered patterns of correlated motions within pol μ complex when non-cognate instead of cognate nucleotides are bound, which agrees with our recently proposed hybrid conformational selection/induced-fit models. Taken together, our studies help interpret the available kinetic data of various non-cognate nucleotide insertions by pol μ. We also suggest experimentally testable predictions; for example, a point mutation like E443M may reduce the ability of pol μ to insert the cognate more than of non-cognate nucleotides. Our studies suggest an interesting relation to pol μ's unique ability to incorporate nucleotides when the upstream primer is not paired.

Kinetic characterization of exonuclease-deficient Staphylococcus aureus PolC, a C-family replicative DNA polymerase

PolC is the C-family replicative polymerase in low G+C content Gram-positive bacteria. To date several structures of C-family polymerases have been reported, including a high resolution crystal structure of a ternary complex of PolC with DNA and incoming deoxynucleoside triphosphate (dNTP). However, kinetic information needed to understand the enzymatic mechanism of C-family polymerases is limited. For this study we have performed a detailed steady-state and pre-steady-state kinetic characterization of correct dNTP incorporation by PolC from the Gram-positive pathogen Staphylococcus aureus, using a construct lacking both the non-conserved N-terminal domain and the 3′–5′ exonuclease domain (Sau-PolC-ΔNΔExo). We find that Sau-PolC-ΔNΔExo has a very fast catalytic rate (k_pol 330 s⁻¹) but also dissociates from DNA rapidly (k_off ∼150 s⁻¹), which explains the low processivity of PolC in the absence of sliding clamp processivity factor. Although Sau-PolC-ΔNΔExo follows the overall enzymatic pathway defined for other polymerases, some significant differences exist. The most striking feature is that the nucleotidyl transfer reaction for Sau-PolC-ΔNΔExo is reversible and is in equilibrium with dNTP binding. Simulation of the reaction pathway suggests that rate of pyrophosphate release, or a conformational change required for pyrophosphate release, is much slower than rate of bond formation. The significance of these findings is discussed in the context of previous data showing that binding of the β-clamp processivity factor stimulates the intrinsic nucleotide incorporation rate of the C-family polymerases, in addition to increasing processivity.

Catalytic effects of mutations of distant protein residues in human DNA polymerase β: theory and experiment

We carried out free-energy calculations and transient kinetic experiments for the insertion of the right (dC) and wrong (dA) nucleotides by wild-type (WT) and six mutant variants of human DNA polymerase β (Pol β). Since the mutated residues in the point mutants, I174S, I260Q, M282L, H285D, E288K, and K289M, were not located in the Pol β catalytic site, we assumed that the WT and its point mutants share the same dianionic phosphorane transition-state structure of the triphosphate moiety of deoxyribonucleotide 5'-triphosphate (dNTP) substrate. On the basis of this assumption, we have formulated a thermodynamic cycle for calculating relative dNTP insertion efficiencies, Ω = (k(pol)/K(D))(mut)/(k(pol)/K(D))(WT) using free-energy perturbation (FEP) and linear interaction energy (LIE) methods. Kinetic studies on five of the mutants have been published previously using different experimental conditions, e.g., primer-template sequences. We have performed a presteady kinetic analysis for the six mutants for comparison with wild-type Pol β using the same conditions, including the same primer/template DNA sequence proximal to the dNTP insertion site used for X-ray crystallographic studies. This consistent set of kinetic and structural data allowed us to eliminate the DNA sequence from the list of factors that can adversely affect calculated Ω values. The calculations using the FEP free energies scaled by 0.5 yielded 0.9 and 1.1 standard deviations from the experimental log Ω values for the insertion of the right and wrong dNTP, respectively. We examined a hybrid FEP/LIE method in which the FEP van der Waals term for the interaction of the mutated amino acid residue with its surrounding environment was replaced by the corresponding van der Waals term calculated using the LIE method, resulting in improved 0.4 and 1.0 standard deviations from the experimental log Ω values. These scaled FEP and FEP/LIE methods were also used to predict log Ω for R283A and R283L Pol β mutants.

Unfavorable electrostatic and steric interactions in DNA polymerase β E295K mutant interfere with the enzyme's pathway

Mutations in DNA polymerase β (pol β) have been associated with approximately 30% of human tumors. The E295K mutation of pol β has been linked to gastric carcinoma via interference with base excision repair. To interpret the different behavior of E295K as compared to wild-type pol β in atomic and energetic detail, we resolve a binary crystal complex of E295K at 2.5 Å and apply transition path sampling (TPS) to delineate the closing pathway of the E295K pol β mutant. Conformational changes are important components in the enzymatic pathway that lead to and ready the enzyme for the chemical reaction. Our analyses show that the closing pathway of E295K mutant differs from the wild-type pol β in terms of the individual transition states along the pathway, associated energies, and the active site conformation in the final closed form of the mutant. In particular, the closed state of E295K has a more distorted active site than the active site in the wild-type pol β. In addition, the total energy barrier in the conformational closing pathway is 65 ± 11 kJ/mol, much higher than that estimated for both correct (e.g., G:C) and incorrect (e.g., G:A) wild-type pol β systems (42 ± 8 and 45 ± 7 kJ/mol, respectively). In particular, the rotation of Arg258 is the rate-limiting step in the conformational pathway of E295K due to unfavorable electrostatic and steric interactions. The distorted active site in the closed relative to open state and the high energy barrier in the conformational pathway may explain in part why the E295K mutant is observed to be inactive. Interestingly, however, following the closing of the thumb but prior to the rotation of Arg258, the E295K mutant complex has a similar energy level as compared to the wild-type pol β. This suggests that the E295K mutant may associate with DNA with similar affinity, but it may be hampered in continuing the process of chemistry. Supporting experimental data come from the observation that the catalytic activity of wild-type pol β is hampered when E295K is present: this may arise from the competition between E295K and wild-type enzyme for the DNA. These combined results suggest that the low insertion efficiency of E295K mutant as compared to wild-type pol β may be related to a closed form distorted by unfavorable electrostatic and steric interactions between Arg258 and other key residues. The active site is thus less competent for proceeding to the chemical reaction, which may also involve a higher reaction barrier than the wild-type or may not be possible in this mutant. Our analysis also suggests further experiments for other mutants to test the above hypothesis and dissect the roles of steric and electrostatic factors on enzyme behavior.

A new proofreading mechanism for lesion bypass by DNA polymerase-λ

Replicative DNA polymerases (DNA pols) increase their fidelity by removing misincorporated nucleotides with their 3' → 5' exonuclease activity. Exonuclease activity reduces translesion synthesis (TLS) efficiency and TLS DNA pols lack 3' → 5' exonuclease activity. Here we show that physiological concentrations of pyrophosphate (PP(i)) activate the pyrophosphorolytic activity by DNA pol-λ, allowing the preferential excision of the incorrectly incorporated A opposite a 7,8-dihydro-8-oxoguanine lesion, or T opposite a 6-methyl-guanine, with respect to the correct C. This is the first example of an alternative proofreading mechanism used during TLS.

Kinetic mechanism of active site assembly and chemical catalysis of DNA polymerase β

It has been inferred from structural and computational studies that the mechanism of DNA polymerases involves subtle but important discrete steps that occur between binding and recognition of the correct dNTP and chemical catalysis. These steps potentially include local conformational changes involving active site residues, reorganization of Mg(2+)-coordinating ligands, and proton transfer. Here we address this broad issue by conducting extensive transient state kinetic analyses of DNA polymerase β (Pol β). We also performed kinetic simulations to evaluate alternative kinetic models. These studies provide some support for two-step subdomain closing and define constraints under which a kinetically significant prechemistry step can occur. To experimentally identify additional microscopic steps, we developed a stopped flow absorbance assay to measure proton formation that occurs during catalysis. These studies provide direct evidence that formation of the enzyme-bound 3'-O(-) nucleophile is rate determining for chemistry. We additionally show that at low pH the chemical step is rate limiting for catalysis, but at high pH, a postchemistry conformational step is rate limiting due to a pH-dependent increase in the rate of nucleotidyl transfer. Finally, we performed exhaustive analyses of [Mg(2+)] and pH effects. In contrast to published studies, the results suggest an irregular pH dependence of k(pol), which is consistent with general base catalysis involving cooperativity between two or more protonic residues. Overall, the results represent significant advancement in the kinetic mechanism of Pol β and also reconcile some computational and experimental findings.

Modeling DNA polymerase μ motions: subtle transitions before chemistry

To investigate whether an open-to-closed transition before the chemical step and induced-fit mechanism exist in DNA polymerase μ (pol μ), we analyze a series of molecular-dynamics simulations with and without the incoming nucleotide in various forms, including mutant systems, based on pol μ's crystal ternary structure. Our simulations capture no significant large-scale motion in either the DNA or the protein domains of pol μ. However, subtle residue motions can be distinguished, specifically of His(329) and Asp(330) to assemble in pol μ's active site, and of Gln(440) and Glu(443) to help accommodate the incoming nucleotide. Mutant simulations capture a DNA frameshift pairing and indicate the importance of Arg(444) and Arg(447) in stacking with the DNA template, and of Arg(448) and Gln(440) in helping to stabilize the position of both the DNA template and the incoming nucleotide. Although limited sampling in the molecular-dynamics simulations cannot be ruled out, our studies suggest an absence of a large-scale motion in pol μ. Together with the known crystallization difficulties of capturing the open form of pol μ, our studies also raise the possibility that a well-defined open form may not exist. Moreover, we suggest that residues Arg(448) and Gln(440) may be crucial for preventing insertion frameshift errors in pol μ.

Inhibition of short patch and long patch base excision repair by an oxidized abasic site

5'-(2-Phosphoryl-1,4-dioxobutane) (DOB) is an oxidized abasic lesion that is produced by a variety of DNA damaging agents, including several antitumor antibiotics. DOB efficiently and irreversibly inhibits DNA polymerase β, an essential base excision repair enzyme in mammalian cells. The generality of this mode of inhibition by DOB is supported by the inactivation of DNA polymerase λ, which may serve as a possible backup for DNA polymerase β during abasic site repair. Protein digests suggest that Lys72 and Lys84, which are present in the lyase active site of DNA polymerase β, are modified by DOB. Monoaldehyde analogues of DOB substantiate the importance of the 1,4-dicarbonyl component of DOB for efficient inactivation of Pol β and the contribution of a freely diffusible electrophile liberated from the inhibitor by the enzyme. Inhibition of DNA polymerase β's lyase function is accompanied by inactivation of its DNA polymerase activity as well, which prevents long patch base excision repair of DOB. Overall, DOB is highly refractory to short patch and long patch base excision repair. Its recalcitrance to succumb to repair suggests that DOB is a significant source of the cytotoxicity of DNA damaging agents that produce it.

Pre-steady state kinetic studies of the fidelity of nucleotide incorporation by yeast DNA polymerase delta

Eukaryotic DNA polymerase delta (pol delta) is a member of the B family of polymerases and synthesizes most of the lagging strand during DNA replication. Yeast pol delta is a heterotrimer comprised of three subunits: the catalytic subunit (Pol3) and two accessory subunits (Pol31 and Pol32). Although pol delta is one of the major eukaryotic replicative polymerase, the mechanism by which it incorporates nucleotides is unknown. Here we report both steady state and pre-steady state kinetic studies of the fidelity of pol delta. We found that pol delta incorporates nucleotides with an error frequency of 10(-4) to 10(-5). Furthermore, we showed that for correct versus incorrect nucleotide incorporation, there are significant differences between both pre-steady state kinetic parameters (apparent K(d)(dNTP) and k(pol)). Somewhat surprisingly, we found that pol delta synthesizes DNA at a slow rate with a k(pol) of approximately 1 s(-1). We suggest that, unlike its prokaryotic counterparts, pol delta requires replication accessory factors like proliferating cell nuclear antigen to achieve rapid rates of nucleotide incorporation.

Human base excision repair creates a bias toward -1 frameshift mutations

Frameshift mutations are particularly deleterious to protein function and play a prominent role in carcinogenesis. Most commonly these mutations involve the insertion or omission of a single nucleotide by a DNA polymerase that slips on a damaged or undamaged template. The mismatch DNA repair pathway can repair these nascent polymerase errors. However, overexpression of enzymes of the base excision repair (BER) pathway is known to increase the frequency of frameshift mutations suggesting competition between these pathways. We have examined the fate of DNA containing single nucleotide bulges in human cell extracts and discovered that several deaminated or alkylated nucleotides are efficiently removed by BER. Because single nucleotide bulges are more highly exposed we anticipate that they would be highly susceptible to spontaneous DNA damage. As a model for this, we have shown that chloroacetaldehyde reacts more than 18-fold faster with an A-bulge than with a stable A.T base pair to create alkylated DNA adducts that can be removed by alkyladenine DNA glycosylase. Reconstitution of the BER pathway using purified components establishes that bulged DNA is efficiently processed. Single nucleotide deletion is predicted to repair +1 frameshift events, but to make -1 frameshift events permanent. Therefore, these findings suggest an additional factor contributing to the bias toward deletion mutations.

Mutational clusters generated by non-processive polymerases: A case study using DNA polymerase betain vitro

Available DNA mutational spectra reveal that the number of mutants with multiple mutations ("multiples") is usually greater than expected from a random distribution of mutations among mutants. These overloads imply the occurrence of non-random clusters of mutations, probably generated during episodes of low-fidelity DNA synthesis. Excess multiples have been reported not only for viruses, bacteria, and eukaryotic cells but also for the DNA polymerases of phages T4 and RB69 in vitro. In the simplest case of a purified polymerase, non-random clusters may be generated by a subfraction of phenotypic variants able to introduce more errors per cycle of DNA synthesis than the normal enzyme. According to this hypothesis, excess multiples are not expected with non-processive polymerases even if they harbor rare mutator variants. DNA polymerase beta (Pol beta) is a mammalian DNA-repair polymerase with very low processivity. Although several Pol beta mutational spectra have been described, there is conflicting evidence on whether or not excess multiples occur, with spectra based on the HSV-tk system tending to show excess multiples. Excess multiples generated by Pol beta or any of its mutants might imply that the excesses of multiples observed in numerous other systems, especially those with processive polymerases, could be artifactual. Here, the distributions of mutations generated by native and recombinant rat Pol beta and by the Pol beta(Y265C) mutator were analyzed in the M13mp2 lacZalpha system. Our results present no evidence for a significant excess of multiples over the expected numbers with any of the Pol beta enzymes tested in this system. The reported excess of Pol beta-generated multiples in the HSV-tk system may reflect a reduced efficiency of detection of base substitutions that cause weak phenotypes, which in turn may artifactually increase the frequency of multiples.

Hinge residue I174 is critical for proper dNTP selection by DNA polymerase beta

DNA polymerase beta (pol beta) is the key gap-filling polymerase in base excision repair, the DNA repair pathway responsible for repairing up to 20000 endogenous lesions per cell per day. Pol beta is also widely used as a model polymerase for structure and function studies, and several structural regions have been identified as being critical for the fidelity of the enzyme. One of these regions is the hydrophobic hinge, a network of hydrophobic residues located between the palm and fingers subdomains. Previous work by our lab has shown that hinge residues Y265, I260, and F272 are critical for polymerase fidelity by functioning in discrimination of the correct from incorrect dNTP during ground state binding. Our work aimed to elucidate the role of hinge residue I174 in polymerase fidelity. To study this residue, we conducted a genetic screen to identify mutants with a substitution at residue I174 that resulted in a mutator polymerase. We then chose the mutator mutant I174S for further study and found that it follows the same general kinetic pathway as and has an overall protein folding similar to that of wild-type (WT) pol beta. Using single-turnover kinetic analysis, we found that I174S exhibits decreased fidelity when inserting a nucleotide opposite a template base G, and this loss of fidelity is due primarily to a loss of discrimination during ground state dNTP binding. Molecular dynamics simulations show that mutation of residue I174 to serine results in an overall tightening of the hinge region, resulting in aberrant protein dynamics and fidelity. These results point to the hinge region as being critical in the maintenance of the proper geometry of the dNTP binding pocket.

A binding free energy decomposition approach for accurate calculations of the fidelity of DNA polymerases

DNA polymerase beta (pol beta) is a small eukaryotic enzyme with the ability to repair short single-stranded DNA gaps that has found use as a model system for larger replicative DNA polymerases. For all DNA polymerases, the factors determining their catalytic power and fidelity are the interactions between the bases of the base pair, amino acids near the active site, and the two magnesium ions. In this report, we study effects of all three aspects on human pol beta transition state (TS) binding free energies by reproducing a consistent set of experimentally determined data for different structures. Our calculations comprise the combination of four different base pairs (incoming pyrimidine nucleotides incorporated opposite both matched and mismatched purines) with four different pol beta structures (wild type and three mutants). We generate three fragments of the incoming deoxynucleoside 5'-triphosphate-TS and run separate calculations for the neutral base part and the highly charged triphosphate part, using different dielectric constants in order to account for the specific dielectric response. This new approach improves our ability to predict the effect of matched and mismatched base pairing and of mutations in DNA polymerases on fidelity and may be a useful tool in studying the potential of DNA polymerase mutations in the development of cancer. It also supports our point of view with regards to the origin of the structural control of fidelity, allowing for a quantified description of the fidelity of DNA polymerases.

A new DNA combing method for biochemical analysis

A simple molecular combing method for analysis of biochemical reactions, called the moving droplet method, has been developed. In this method, small droplets containing DNA molecules run down a sloped glass substrate, and this creates a moving interface among the air, droplet, and substrate that stretches the DNA molecules. This method requires a much smaller volume of sample solution than other established combing methods, allowing wider application in various fields. Using this method, lambdaDNA molecules were stretched and absorbed to a glass substrate, and single-molecule analysis of DNA synthesis by DNA polymerases was performed.

Techniques used to study the DNA polymerase reaction pathway

A minimal reaction pathway for DNA polymerases was established over 20years ago using chemical-quench methods. Since that time there has been considerable interest in noncovalent steps in the reaction pathway, conformational changes involving the polymerase or its DNA substrate that may play a role in substrate specificity. Fluorescence-based assays have been devised in order to study these conformational transitions and the results obtained have added new detail to the reaction pathway.

RB69 DNA polymerase mutants with expanded nascent base-pair-binding pockets are highly efficient but have reduced base selectivity

We have investigated the effect of systematically enlarging the nascent base-pair-binding pocket (NBP) of a replicative DNA polymerase from bacteriophage RB69 (RB69 pol) on the incorporation efficiency (k(pol)/K(d,app)) for both correct and incorrect dNMPs. Accordingly, we replaced residues L561, Y567, and S565 in the NBP with Ala, Ala, and Gly, respectively. We combined L561A and Y567A to give a double mutant and then introduced the S565G mutation to give a triple mutant. The efficiency of incorrect dNMP insertion increased markedly relative to the wild type with the single mutants and increased further as the number of substitutions in the NBP increased. The difference in incorporation efficiency for mispairs between the mutants and the wild-type RB69 pol was due mainly to k(pol). Unexpectedly, enlarging the NBP had a minimal effect on the incorporation efficiency of correct dNMPs. Our kinetic data suggest that replicative DNA pols exert base discrimination via "negative selection" against mispairs by using residues in the NBP, particularly the three residues analyzed in this study, to allow rapid incorporation of only correct base pairs. This proposal differs from how geometry and "tightness of fit" of the NBP is often invoked to account for rapid incorporation of correct base pairs, namely, that a tighter fit within the NBP leads to an increase in insertion rates [Kool, E. T. (2002) Annu. Rev. Biochem. 71, 191-219]. We related our findings to that of a model translesion DNA pol, Sulfolobus solfataricus Dpo4. We concur with the main conclusion of a previous study [Mizukami, S., et al. (2006) Biochemistry 45, 2772-2778], namely, that lesion bypass pols exhibit low incorporation efficiencies for correct dNMPs (leading to relative promiscuity) not because of a more open NBP but because of a loose fit of substrates bound in the catalytic centers. This is a property not shared by RB69 pol and its mutants.

DNA polymerase family X: function, structure, and cellular roles

The X family of DNA polymerases in eukaryotic cells consists of terminal transferase and DNA polymerases beta, lambda, and mu. These enzymes have similar structural portraits, yet different biochemical properties, especially in their interactions with DNA. None of these enzymes possesses a proofreading subdomain, and their intrinsic fidelity of DNA synthesis is much lower than that of a polymerase that functions in cellular DNA replication. In this review, we discuss the similarities and differences of three members of Family X: polymerases beta, lambda, and mu. We focus on biochemical mechanisms, structural variation, fidelity and lesion bypass mechanisms, and cellular roles. Remarkably, although these enzymes have similar three-dimensional structures, their biochemical properties and cellular functions differ in important ways that impact cellular function.

Contribution of the reverse rate of the conformational step to polymerase beta fidelity

A complete understanding of the kinetic mechanism of fidelity requires comparison of correct and incorrect dNTP incorporation pathways in both the forward and reverse directions. The studies presented here focus on the dNTP-induced conformational step, which has historically been proposed by many to be the major determinant of fidelity. As it was recently highlighted [Tsai, Y. C., and Johnson, K. A. (2006) Biochemistry 45, 9675-9687], chemistry can be the slowest step in the forward direction of the correct dNTP incorporation pathway, yet the corresponding microscopic rate constant would not contribute toward fidelity in the case when the reverse rate of the conformational step is slower than chemistry. Here we use a stopped-flow technique to directly measure the reverse rate of the conformational step in the DNA polymerase beta (Pol beta) kinetic pathway. Extensive pre-steady-state kinetic studies presented include the utilization of 2-aminopurine-labeled DNA substrates, 2-aminopurine nucleotide triphosphate, a nonhydrolyzable nucleotide analogue dAMPCPP, and a rapid sequential mixing reaction scheme. Additionally, the effect of mismatched dNTPs, various metal ions, and the presence of the 3'-terminal hydroxyl group of the primer on the rate of the reverse "opening" conformational step were analyzed. Our analyses indicate that reverse "opening" is drastically facilitated in the presence of mismatched ternary complexes, which is in agreement with the hypothesis that the ternary complex is destabilized by the presence of incorrect dNTP. By analysis of the relative magnitudes of chemistry and reverse "opening" in the presence of both matched and mismatched matched ternary complexes, this work further validates that, for Pol beta, fidelity is dictated by the differences in free energy required to reach the highest energy transition state of the chemical step.

Cloning and characterization of a DNA polymerase beta gene from Trypanosoma cruzi

A gene coding for a DNA polymerase beta from the Trypanosoma cruzi Miranda clone, belonging to the TcI lineage, was cloned (Miranda Tcpol beta), using the information from eight peptides of the T. cruzi beta-like DNA polymerase purified previously. The gene encodes for a protein of 403 amino acids which is very similar to the two T. cruzi CL Brener (TcIIe lineage) sequences published, but has three different residues in highly conserved segments. At the amino acid level, the identity of TcI-pol beta with mitochondrial pol beta and pol beta-PAK from other trypanosomatids was between 68-80% and 22-30%, respectively. Miranda Tc-pol beta protein has an N-terminal sequence similar to that described in the mitochondrial Crithidia fasciculata pol beta, which suggests that the TcI-pol beta plays a role in the organelle. Northern and Western analyses showed that this T. cruzi gene is highly expressed both in proliferative and non-proliferative developmental forms. These results suggest that, in addition to replication of kDNA in proliferative cells, this enzyme may have another function in non-proliferative cells, such as DNA repair role similar to that which has extensively been described in a vast spectrum of eukaryotic cells.

Unnatural substrate repertoire of A, B, and X family DNA polymerases

As part of an effort to develop unnatural base pairs that are stable and replicable in DNA, we examined the ability of five different polymerases to replicate DNA containing four different unnatural nucleotides bearing predominantly hydrophobic nucleobase analogs. The unnatural pairs were developed based on intensive studies using the Klenow fragment of DNA polymerase I from E. coli (Kf) and found to be recognized to varying degrees. The five additional polymerases characterized here include family A polymerases from bacteriophage T7 and Thermus aquaticus, family B polymerases from Thermococcus litoralis and Thermococcus 9(o)N-7, and the family X polymerase, human polymerase beta. While we find that some aspects of unnatural base pair recognition are conserved among the polymerases, for example, the pair formed between two d3FB nucleotides is typically well recognized, the detailed recognition of most of the unnatural base pairs is generally polymerase dependent. In contrast, we find that the pair formed between d5SICS and dMMO2 is generally well recognized by all of the polymerases examined, suggesting that the determinants of efficient and general recognition are contained within the geometric and electronic structure of these unnatural nucleobases themselves. The data suggest that while the d3FB:d3FB pair is sufficiently well recognized by several of the polymerases for in vitro applications, the d5SICS:dMMO2 heteropair is likely uniquely promising for in vivo use. T7-mediated replication is especially noteworthy due to strong mispair discrimination.

Mismatched and matched dNTP incorporation by DNA polymerase beta proceed via analogous kinetic pathways

While matched nucleotide incorporation by DNA polymerase beta (Pol beta) has been well-studied, a true understanding of polymerase fidelity requires comparison of both matched and mismatched dNTP incorporation pathways. Here we examine the mechanism of misincorporation for wild-type (WT) Pol beta and an error-prone I260Q variant using stopped-flow fluorescence assays and steady-state fluorescence spectroscopy. In stopped-flow, a biphasic fluorescence trace is observed for both enzymes during mismatched dNTP incorporation. The fluorescence transitions are in the same direction as that observed for matched dNTP, albeit with lower amplitude. Assignments of the fast and slow fluorescence phases are designated to the same mechanistic steps previously determined for matched dNTP incorporation. For both WT and I260Q mismatched dNTP incorporation, the rate of the fast phase, reflecting subdomain closing, is comparable to that induced by correct dNTP. Pre-steady-state kinetic evaluation reveals that both enzymes display similar correct dNTP insertion profiles, and the lower fidelity intrinsic to the I260Q mutant results from enhanced efficiency of mismatched incorporation. Notably, in comparison to WT, I260Q demonstrates enhanced intensity of fluorescence emission upon mismatched ternary complex formation. Both kinetic and steady-state fluorescence data suggest that relaxed discrimination against incorrect dNTP by I260Q is a consequence of a loss in ability to destabilize the mismatched ternary complex. Overall, our results provide first direct evidence that mismatched and matched dNTP incorporations proceed via analogous kinetic pathways, and support our standing hypothesis that the fidelity of Pol beta originates from destabilization of the mismatched closed ternary complex and chemical transition state.

Opposed steric constraints in human DNA polymerase beta and E. coli DNA polymerase I

DNA polymerase selectivity is crucial for the survival of any living species, yet varies significantly among different DNA polymerases. Errors within DNA polymerase-catalyzed DNA synthesis result from the insertion of noncanonical nucleotides and extension of misaligned DNA substrates. The substrate binding characteristics among DNA polymerases are believed to vary in properties such as shape and tightness of the binding pocket, which might account for the observed differences in fidelity. Here, we employed 4'-alkylated nucleotides and primer strands bearing 4'-alkylated nucleotides at the 3'-terminal position as steric probes to investigate differential active site properties of human DNA polymerase beta (Pol beta) and the 3'-->5'-exonuclease-deficient Klenow fragment of E. coli DNA polymerase I (KF(exo-)). Transient kinetic measurements indicate that both enzymes vary significantly in active site tightness at both positions. While small 4'-methyl and -ethyl modifications of the nucleoside triphosphate perturb Pol beta catalysis, extension of modified primer strands is only marginally affected. Just the opposite was observed for KF(exo-). Here, incorporation of the modified nucleotides is only slightly reduced, whereas size augmentation of the 3'-terminal nucleotide in the primer reduces the catalytic efficiency by more than 7000- and 260,000-fold, respectively. NMR studies support the notion that the observed effects derive from enzyme substrate interactions rather than inherent properties of the modified substrates. These findings are consistent with the observed differential capability of the investigated DNA polymerases in fidelity such as processing misaligned DNA substrates. The results presented provide direct evidence for the involvement of varied steric effects among different DNA polymerases on their fidelity.

The Asp285 variant of DNA polymerase beta extends mispaired primer termini via increased nucleotide binding

Endogenous DNA damage occurs at a rate of at least 20,000 lesions per cell per day. Base excision repair (BER) is a key pathway for maintaining genome stability. Several pol beta variants were identified as conferring resistance to 3'-azido-3'-deoxythymidine (AZT) in Escherichia coli (Kosa et al. (1999) J. Biol. Chem. 274, 3851-3858). Detailed biochemical studies on one of these AZT-resistant variants, His285 to Asp, have shown that the H285D variant of pol beta possesses pre-steady-state kinetics that are similar to the wild-type polymerase. In gap filling assays with 5-bp gapped DNA, H285D showed a slight mutator phenotype. In depth single turnover kinetic analysis revealed that H285D is much more efficient than wild-type pol beta at extending mispaired primer termini. This mispair extension property of H285D is attributed to a greatly increased binding to the next correct nucleotide in the presence of a mispair. This change in K d(dNTP),app is not accompanied by a change in k pol; values for k pol are the same for both H285D and wild-type. Close examination of available structural data, as well as molecular modeling, has shown that residue 285 is able to make several stabilizing contacts in the fingers domain of the polymerase, and the introduction of a negatively charged side chain could have important effects on the enzyme. It is postulated that the loss of the contact between His285, Lys289, and Ile323 is responsible for the ability of H285D to extend mispairs through disruption of contacts near the C-terminal end of pol beta and propagation into the nucleotide binding pocket.

Structure and function of 2:1 DNA polymerase.DNA complexes

DNA polymerases are required for DNA replication and DNA repair in all of the living organisms. Different DNA polymerases are responsible different stages of DNA metabolism, and many of them are multifunctional enzymes. It was generally assumed that the different reactions are catalyzed by the same enzyme molecule. In addition to 1:1 DNA polymerase.DNA complex reported by crystallization studies, 2:1 and higher order DNA polymerase.DNA complexes have been identified in solution studies by various biochemical and biophysical approaches. Further, abundant evidences for the DNA polymerase-DNA interactions in several DNA polymerases suggested that the 2:1 complex represents the more active form. This review describes the current status of this emerging subject and explores their potential in vitro and in vivo functional significance, particularly for the 2:1 complexes of mammalian DNA polymerase beta (Pol beta), the Klenow fragment of E. coli DNA polymerase I (KF), and T4 DNA polymerase.

Altered order of substrate binding by DNA polymerase X from African Swine Fever virus

A sequential ordered substrate binding established previously for several DNA polymerases is generally extended to all DNA polymerases, and the characterization of novel polymerases is often based on the assumption that the enzymes should productively bind DNA substrate first, followed by template-directed dNTP binding. The comprehensive kinetic study of DNA polymerase X (Pol X) from African swine fever virus reported here is the first analysis of the substrate binding order performed for a low-fidelity DNA polymerase. A classical steady-state kinetic approach using substrate analogue inhibition assays demonstrates that Pol X does not follow the bi-bi ordered mechanism established for other DNA polymerases. Further, using isotope-trapping experiments and stopped-flow fluorescence assays, we show that Pol X can bind Mg²⁺·dNTPs in a productive manner in the absence of DNA substrate. We also show that DNA binding to Pol X, although rapid, may not always be productive. Furthermore, we show that binding of Mg²⁺·dNTP to Pol X facilitates subsequent formation of the catalytically competent Pol X·DNA·dNTP ternary complex, whereas DNA binding prior to dNTP binding brings the enzyme into a nonproductive conformation where subsequent nucleotide substrate binding is hindered. Together, our results suggest that Pol X prefers an ordered sequential mechanism with Mg²⁺·dNTP as the first substrate.