Creating RNA bulges: cleavage of RNA in RNA/DNA duplexes by metal ion catalysis

Quality Control of mRNA Vaccines by Synthetic Ribonucleases: Analysis of the Poly-A-Tail

The effectivity and safety of mRNA vaccines critically depends on the presence of correct 5' caps and poly-A tails. Due to the high molecular mass of full-size mRNAs, however, the direct analysis by mass spectrometry is hardly possible. Here we describe the use of synthetic ribonucleases to cleave off 5' and 3' terminal fragments which can be further analyzed by HPLC or by LC-MS. Compared to existing methods (e. g. RNase H), the new approach uses robust catalysts, is free of sequence limitations, avoids metal ions and combines fast sample preparation with high precision of the cut.

Bulge-Forming miRNases Cleave Oncogenic miRNAs at the Central Loop Region in a Sequence-Specific Manner

The selective degradation of disease-associated microRNA is promising for the development of new therapeutic approaches. In this study, we engineered a series of bulge-loop-forming oligonucleotides conjugated with catalytic peptide [(LeuArg)₂Gly]₂ (BC-miRNases) capable of recognizing and destroying oncogenic miR-17 and miR-21. The principle behind the design of BC-miRNase is the cleavage of miRNA at a three-nucleotide bulge loop that forms in the central loop region, which is essential for the biological competence of miRNA. A thorough study of mono- and bis-BC-miRNases (containing one or two catalytic peptides, respectively) revealed that: (i) the sequence of miRNA bulge loops and neighbouring motifs are of fundamental importance for efficient miRNA cleavage (i.e., motifs containing repeating pyrimidine-A bonds are more susceptible to cleavage); (ii) the incorporation of the second catalytic peptide in the same molecular scaffold increases the potency of BC-miRNase, providing a complete degradation of miR-17 within 72 h; (iii) the synergetic co-operation of BC-miRNases with RNase H accelerates the rate of miRNA catalytic cleavage by both the conjugate and the enzyme. Such synergy allows the rapid destruction of constantly emerging miRNA to maintain sufficient knockdown and achieve a desired therapeutic effect.

Metal-Catalyzed Hydrolysis of RNA in Aqueous Environments

The stability of RNA in aqueous systems is critical for multiple environmental applications including evaluating the environmental fate of RNA interference pesticides and interpreting viral genetic marker abundance for wastewater-based epidemiology. In addition to biological processes, abiotic reactions may also contribute to RNA loss. In particular, some metals are known to dramatically accelerate rates of RNA hydrolysis under certain conditions (i.e., 37 °C or higher temperatures, 0.15-100 mM metal concentrations). In this study, we investigated the extent to which metals catalyze RNA hydrolysis under environmentally relevant conditions. At ambient temperature, neutral pH, and ∼10 μM metal concentrations, we determined that metals that are stronger Lewis acids (i.e., lead, copper) catalyzed single-stranded (ss)RNA, whereas metals that are weaker Lewis acids (i.e., zinc, nickel) did not. In contrast, double-stranded (ds)RNA resisted hydrolysis by all metals. While lead and copper catalyzed ssRNA hydrolysis at ambient temperature and neutral pH values, other factors such as lowering the solution pH and including inorganic and organic ligands reduced the rates of these reactions. Considering these factors along with sub-micromolar metal concentrations typical of environmental systems, we determined that both ssRNA and dsRNA are unlikely to undergo significant metal-catalyzed hydrolysis in most environmental aqueous systems.

Innovative developments and emerging technologies in RNA therapeutics

RNA-based therapeutics are emerging as a powerful platform for the treatment of multiple diseases. Currently, the two main categories of nucleic acid therapeutics, antisense oligonucleotides and small interfering RNAs (siRNAs), achieve their therapeutic effect through either gene silencing, splicing modulation or microRNA binding, giving rise to versatile options to target pathogenic gene expression patterns. Moreover, ongoing research seeks to expand the scope of RNA-based drugs to include more complex nucleic acid templates, such as messenger RNA, as exemplified by the first approved mRNA-based vaccine in 2020. The increasing number of approved sequences and ongoing clinical trials has attracted considerable interest in the chemical development of oligonucleotides and nucleic acids as drugs, especially since the FDA approval of the first siRNA drug in 2018. As a result, a variety of innovative approaches is emerging, highlighting the potential of RNA as one of the most prominent therapeutic tools in the drug design and development pipeline. This review seeks to provide a comprehensive summary of current efforts in academia and industry aimed at fully realizing the potential of RNA-based therapeutics. Towards this, we introduce established and emerging RNA-based technologies, with a focus on their potential as biosensors and therapeutics. We then describe their mechanisms of action and their application in different disease contexts, along with the strengths and limitations of each strategy. Since the nucleic acid toolbox is rapidly expanding, we also introduce RNA minimal architectures, RNA/protein cleavers and viral RNA as promising modalities for new therapeutics and discuss future directions for the field.

Influence of sequence variation on the RNA cleavage activity of Zn2+-dimethyl-dppz-PNA-based artificial enzymes

The development of Zn2+-dependent dimethyl-dppz-PNA conjugates (PNAzymes) as efficient site-specific artificial ribonucleases enables rapid sequence-specific degradation of clinically relevant RNA target sequences, but the significance of the RNA/PNAzyme sequence and structural demands for the identification of novel RNA targets are not fully understood. In the present study, we investigated the influence of sequence variation in the recognition arms of the RNA/PNAzyme complex on the RNA cleavage activity of the artificial enzymes. The base pairs closing the 3-nucleotide bulge region on both sides of the bulge as well as the neighbouring nucleobases were shown to significantly influence the RNA cleavage activity. Elongation of the RNA/PNAzyme complex was shown to be tolerated, although potentially prohibitive for catalytic turnover. The specificity of PNAzyme action was clearly demonstrated by the significantly reduced or absent cleavage activity in complexes containing mismatches. Further investigation into 2- and 4-nucleotide RNA bulges indicated that formation of 3-nucleotide bulges in the target RNA gives the optimal cleavage rates, while some potential off-target cleavage of formed 4-nucleotide bulges of select sequences should be considered.

Duplex Formation and the Origins of Homochirality

The roots of biological homochirality remain unknown despite decades of study. A commonly proposed path includes an initial small enantiomeric excess that was amplified over time, but a satisfactory source of the excess and a plausible amplification process have yet to be described. We propose here a route to oligonucleotide homochirality from unactivated racemic sources based upon the facts that duplex structures are inherently homochiral and their synthesis from strands of complementary string nucleotide subunits is both uncommonly rapid and exergonic. Simulations employing available kinetic and thermochemical data in an iterated sequence of three equilibria in dry/wet cycles running from unactivated and racemic RNA monomers through oligonucleotides to duplex structures have shown that the exceptional association rate distorts the otherwise simple equilibrium string and overcomes the severe kinetic and stoichiometric barriers to the pairing of the statistically scant homochiral fractions. The simulations reveal widespread deracemization and the full conversion of racemic monomers to populations of L- and D-duplexes in a succession of growth in which the initially formed duplexes are replaced over time with increasingly larger descendants. This claim is open to experimental testing.

Zn2+-Dependent peptide nucleic acid-based artificial ribonucleases with unprecedented efficiency and specificity

We present Zn²⁺-dependent dimethyl-dipyridophenazine PNA conjugates as efficient RNA cleaving artificial enzymes. These PNAzymes display site-specific RNA cleavage with 10 minute half-lives and cleave clinically relevant RNA models.

Strict conformational demands of RNA cleavage in bulge-loops created by peptidyl-oligonucleotide conjugates

Potent knockdown of pathogenic RNA in vivo is an urgent health need unmet by both small-molecule and biologic drugs. ‘Smart’ supramolecular assembly of catalysts offers precise recognition and potent destruction of targeted RNA, hitherto not found in nature. Peptidyl-oligonucleotide ribonucleases are here chemically engineered to create and attack bulge-loop regions upon hybridization to target RNA. Catalytic peptide was incorporated either via a centrally modified nucleotide (Type 1) or through an abasic sugar residue (Type 2) within the RNA-recognition motif to reveal striking differences in biological performance and strict structural demands of ribonuclease activity. None of the Type 1 conjugates were catalytically active, whereas all Type 2 conjugates cleaved RNA target in a sequence-specific manner, with up to 90% cleavage from 5-nt bulge-loops (BC5-α and BC5L-β anomers) through multiple cuts, including in folds nearby. Molecular dynamics simulations provided structural explanation of accessibility of the RNA cleavage sites to the peptide with adoption of an ‘in-line’ attack conformation for catalysis. Hybridization assays and enzymatic probing with RNases illuminated how RNA binding specificity and dissociation after cleavage can be balanced to permit turnover of the catalytic reaction. This is an essential requirement for inactivation of multiple copies of disease-associated RNA and therapeutic efficacy.

One- and Two-Dimensional High-Resolution NMR from Flat Surfaces

Determining atomic-level characteristics of molecules on two-dimensional surfaces is one of the fundamental challenges in chemistry. High-resolution nuclear magnetic resonance (NMR) could deliver rich structural information, but its application to two-dimensional materials has been prevented by intrinsically low sensitivity. Here we obtain high-resolution one- and two-dimensional ³¹P NMR spectra from as little as 160 picomoles of oligonucleotide functionalities deposited onto silicate glass and sapphire wafers. This is enabled by a factor >10⁵ improvement in sensitivity compared to typical NMR approaches from combining dynamic nuclear polarization methods, multiple-echo acquisition, and optimized sample formulation. We demonstrate that, with this ultrahigh NMR sensitivity, ³¹P NMR can be used to observe DNA bound to miRNA, to sense conformational changes due to ion binding, and to follow photochemical degradation reactions.

Zinc Ion-Dependent Peptide Nucleic Acid-Based Artificial Enzyme that Cleaves RNA-Bulge Size and Sequence Dependence

In this report, we investigate the efficiency and selectivity of a Zn²⁺-dependent peptide nucleic acid-based artificial ribonuclease (PNAzyme) that cleaves RNA target sequences. The target RNAs are varied to form different sizes (3 and 4 nucleotides, nt) and sequences in the bulge formed upon binding to the PNAzyme. PNAzyme-promoted cleavage of the target RNAs was observed and variation of the substrate showed a clear dependence on the sequence and size of the bulge. For targets that form 4-nt bulges, we identified systems with an improved efficacy (an estimated half-life of ca 7–8 h as compared to 11–12 h for sequences studied earlier) as well as systems with an improved site selectivity (up to over 70% cleavage at a single site as compared to 50–60% with previous targets sequences). For targets forming 3-nt bulges, the enhancement compared to previous systems was even more pronounced. Compared to a starting point of targets forming 3-nt AAA bulges (half-lives of ca 21–24 h), we could identify target sequences that were cleaved with half-lives three times lower (ca 7–8 h), i.e., at rates similar to those found for the fastest 4-nt bulge system. In addition, with the 3-nt bulge RNA target site selectivity was improved even further to reach well over 80% cleavage at a specific site.

'Dual' peptidyl-oligonucleotide conjugates: Role of conformational flexibility in catalytic cleavage of RNA

Traditional therapeutic interventions against abnormal gene expression in disease states at the level of expressed proteins are becoming increasingly difficult due to poor selectivity, off-target effects and associated toxicity. Upstream catalytic targeting of specific RNA sequences offers an alternative platform for drug discovery to achieve more potent and selective treatment through antisense interference with disease-relevant RNAs. We report a novel class of catalytic biomaterials, comprising amphipathic RNA-cleaving peptides placed between two RNA recognition motifs, here demonstrated to target the TΨC loop and 3'- acceptor stem of tRNA^Phe. These unique peptidyl-oligonucleotide 'dual' conjugates (DCs) were created by phosphoramidate or thiol-maleimide conjugation chemistry of a TΨC-targeting oligonucleotide to the N-terminus of the amphipathic peptide sequence, followed by amide coupling of a 3'-acceptor stem-targeting oligonucleotide to the free C-terminal carboxylic acid functionality of the same peptide. Hybridization of the DCs bearing two spatially-separated recognition motifs with the target tRNA^Phe placed the peptide adjacent to a single-stranded RNA region and promoted cleavage within the 'action radius' of the catalytic peptide. Up to 100% cleavage of the target tRNA^Phe was achieved by the best candidate (i.e. DC6) within 4 h, when conformational flexibility was introduced into the linker regions between the peptide and oligonucleotide components. This study provides the strong position for future development of highly selective RNA-targeting agents that can potentially be used for disease-selective treatment at the level of messenger, micro, and genomic viral RNA.

A targeted DNA substrate mechanism for the inhibition of HIV-1 integrase by inhibitors with antiretroviral activity

We recently reported that viral DNA could be the primary target of raltegravir (RAL), an efficient anti‐HIV‐1 drug, which acts by inhibiting integrase. To elucidate this mechanism, we conducted a comparative analysis of RAL and TB11, a diketoacid abandoned as an anti‐HIV‐1 drug for its weak efficiency and marked toxicity, and tested the effects of the catalytic cofactor Mg²⁺ (5 mm) on drug‐binding properties. We used circular dichroism and fluorescence to determine drug affinities for viral DNA long terminal repeats (LTRs) and peptides derived from the integrase active site and DNA retardation assays to assess drug intercalation into DNA base pairs. We found that RAL bound more tightly to LTR ends than did TB11 (a diketo acid bearing an azido group) and that Mg²⁺ significantly increased the affinity of both RAL and TB11. We also observed a good relationship between drug binding with processed LTR and strand transfer inhibition. This unusual type of inhibition was caused by Mg²⁺‐assisted binding of drugs to DNA substrate, rather than to enzyme. Notably, while RAL bound exclusively to the cleavable/cleaved site, TB11 further intercalated into DNA base pairs and interacted with the integrase‐derived peptides. These unwanted binding sites explain the weaker bioavailability and higher toxicity of TB11 compared with the more effective RAL.

Enzyme Mimics: Advances and Applications

Enzyme mimics or artificial enzymes are a class of catalysts that have been actively pursued for decades and have heralded much interest as potentially viable alternatives to natural enzymes. Aside from having catalytic activities similar to their natural counterparts, enzyme mimics have the desired advantages of tunable structures and catalytic efficiencies, excellent tolerance to experimental conditions, lower cost, and purely synthetic routes to their preparation. Although still in the midst of development, impressive advances have already been made. Enzyme mimics have shown immense potential in the catalysis of a wide range of chemical and biological reactions, the development of chemical and biological sensing and anti-biofouling systems, and the production of pharmaceuticals and clean fuels. This Review concerns the development of various types of enzyme mimics, namely polymeric and dendrimeric, supramolecular, nanoparticulate and proteinic enzyme mimics, with an emphasis on their synthesis, catalytic properties and technical applications. It provides an introduction to enzyme mimics and a comprehensive summary of the advances and current standings of their applications, and seeks to inspire researchers to perfect the design and synthesis of enzyme mimics and to tailor their functionality for a much wider range of applications.

Studies on Tris(2-aminobenzimidazole)-PNA Based Artificial Nucleases: A Comparison of Two Analytical Techniques

A new peptide nucleic acid (PNA) construct carrying a tris(2-aminobenzimidazole) phosphodiester cleaver is presented. This non-metal-based artificial nuclease hydrolyzes RNA substrates that form a bulge upon binding to the PNA. Reaction rates depend on the bulge sequence. For conjugates of tris(2-aminobenzimidazole), substrate turnover is shown for the first time. Two methods of analysis for the kinetics are compared: IE-HPLC separation of oligonucleotide fragments and analysis of Cy5-labeled oligonucleotide fragments by denaturating PAGE on a DNA sequencer, respectively. The different methods give rates that are in the same range where, in general, the substrates for the sequencer method give slightly lower rates.

Micrometer-sized network structure of novel DNA-lipid conjugates induced by heat stimulation

We have developed a novel lipid-bearing DNA that forms hairpin modules, including a single RNA monomer; this can be used to create micrometer-sized structures from nanometer-sized building blocks during breakage at the RNA site. In the presence of divalent metal ions and heat stimulation, we observed transition of the self-assembly, which results in the formation of a three-dimensional network structure. To our knowledge, this is also the first report of heat-induced micrometer-sized molecular self-assembly of molecules that carry biological information.

Hydrolysis of bulged nucleotides in hybrids formed by RNA and imidazole-derivatized oligo-2'-O-methylribonucleotides

In order to enhance the efficacy of small antisense molecules, we examined a series of antisense oligonucleotides derivatized with functional groups designed to enable them to hydrolyze their RNA target. Solid phase synthetic methods were used to prepare imidazole-derivatized antisense oligo-2'-O-methylribonucleotides. Upon binding, these oligonucleotides create internal bulged bases in the target RNA that serve as sites for hydrolysis. We observed that an oligonucleotide derivatized with a side chain containing two imidazole groups was capable of hydrolyzing 58% of its RNA target when incubated with the target for 48 hours at 37°C and physiological pH.

Metal-containing peptide nucleic acid conjugates

Peptide Nucleic Acids (PNAs) are non-natural DNA/RNA analogues with favourable physico-chemical properties and promising applications. Discovered nearly 20 years ago, PNAs have recently re-gained quite a lot of attention. In this Perspective article, we discuss the latest advances on the preparation and utilisation of PNA monomers and oligomers containing metal complexes. These metal- conjugates have found applications in various research fields such as in the sequence-specific detection of nucleic acids, in the hydrolysis of nucleic acids and peptides, as radioactive probes or as modulators of PNA·DNA hybrid stability, and last but not least as probes for molecular and cell biology.

PNAzymes that are artificial RNA restriction enzymes

DNA-cleaving restriction enzymes are well-known tools in biomedical and biotechnological research. There are, however, no corresponding enzymes known for RNA cleavage. There has been an ongoing development of artificial ribonucleases, including some attempts at sequence selectivity. However, so far these systems have displayed modest rates of cleavage, and in most cases, the cleaver has been used in excess or in stoichiometric amounts. In the current work, we present PNA-based systems (PNAzymes) that carry a Cu(II)-2,9-dimethylphenanthroline group and that act as site and sequence specific RNases. The general basis for the systems is that the target is cleaved at a nonbase paired region (RNA bulge) which is formed in the substrate upon binding of the PNAzyme. With this copper based system, cleavage takes place at virtually only one site and with a half-life of down to 30 min under stoichiometric conditions. Efficient turnover of RNA-substrate is shown with a 100-fold excess of substrate, thus, demonstrating true enzyme behavior. In addition, alteration of the sequence in the RNA bulge or a mismatch in the base-pairing region leads to substantial decreases in rate showing both kinetic resolution and binding discrimination in the substrate selectivity. The selectivity is further demonstrated by the substrates, with two potential cleavage sites differing in only one base, are cleaved only at the site that either does not have a mismatch or is kinetically preferred. We suggest that these systems can serve as a basis for construction of RNA restriction enzymes for in vitro manipulations.

Non-enzymatic template-directed recombination of RNAs

RNA non-enzymatic recombination reactions are of great interest within the hypothesis of the “RNA world”, which argues that at some stage of prebiotic life development proteins were not yet engaged in biochemical reactions and RNA carried out both the information storage task and the full range of catalytic roles necessary in primitive self-replicating systems. Here we report on the study of recombination reaction occuring between two 96 nucleotides (nts) fragments of RNAs under physiological conditions and governed by a short oligodeoxyribonucleotide template, partially complementary to sequences within each of the RNAs. Analysis of recombination products shows that ligation is predominantly template-directed, and occurs within the complementary complex with the template in “butt-to-butt” manner, in 1- or 3- nts bulges or in 2–3 nts internal loops. Minor recombination products formed in the template-independent manner are detected as well.

New macrocyclic terbium(III) complex for use in RNA footprinting experiments

Reaction of terbium triflate with a heptadentate ligand derivative of cyclen, L1 = 2-[7-ethyl-4,10-bis(isopropylcarbamoylmethyl)-1,4,7,10-tetraazacyclododec-1-yl]-N-isopropyl-acetamide, produced a new synthetic ribonuclease, [Tb(L1)(OTf)(OH(2))](OTf)(2).MeCN (C1). X-ray crystal structure analysis indicates that the terbium(III) center in C1 is 9-coordinate, with a capped square-antiprism geometry. While the terbium(III) center is tightly bound by the L1 ligand, two of the coordination sites are occupied by labile water and triflate ligands. In water, the triflate ligand is likely to be displaced, forming [Tb(L1)(OH(2))(2)](3+), which is able to effectively promote RNA cleavage. This complex greatly accelerates the rate of intramolecular transesterification of an activated model RNA phosphodiester, uridine-3'-p-nitrophenylphosphate (UpNP), with k(obs) = 5.5(1) x 10(-2) s(-1) at 21 degrees C and pH 7.5, corresponding to an apparent second-order rate constant of 277(5) M(-1) s(-1). By contrast, the analogous complex of an octadentate derivative of cyclen featuring only a single labile coordination site, [Tb(L2)(OH(2))](OTf)(3) (C2), where L2 = 2-[4,7,10-tris(isopropylcarbamoylmethyl)-1,4,7,10-tetraazacyclododec-1-yl]-N-isopropyl-acetamide, is inactive. [Tb(L1)(OH(2))(2)](3+) is also capable of hydrolyzing short transcripts of the HIV-1 transactivation response (TAR) element, HIV-1 dimerization initiation site (DIS) and ribosomal A-site, as well as formyl methionine tRNA (tRNA(fMet)), albeit at a considerably slower rate than UpNP transesterification (k(obs) = 2.78(8) x 10(-5) s(-1) for TAR cleavage at 37 degrees C, pH 6.5, corresponding to an apparent second-order rate constant of 0.56(2) M(-1)s(-1)). Cleavage is concentrated at the single-stranded "bulge" regions of these RNA motifs. Exploiting this selectivity, [Tb(L1)(OH(2))(2)](3+) was successfully employed in footprinting experiments, in which binding of the Tat peptide and neomycin B to the bulge region of the TAR stem-loop was confirmed.

Identification and characterization of a short 2'-3' bond-forming ribozyme

A large number of natural and artificial ribozymes have been isolated since the demonstration of the catalytic potential of RNA, with the majority of these catalyzing phosphate hydrolysis or transesterification reactions. Here, we describe and characterize an extremely short ribozyme that catalyzes the positionally specific transesterification that produces a 2'-3' phosphodiester bond between itself and a branch substrate provided in trans, cleaving itself internally in the process. Although this ribozyme was originally derived from constructs based on snRNAs, its minimal catalytic motif contains essentially no snRNA sequence and the reaction it catalyzes is not directly related to either step of pre-mRNA splicing. Our data have implications for the intrinsic reactivity of the large amount of RNA sequence space known to be transcribed in nature and for the validity and utility of the use of protein-free systems to study pre-mRNA splicing.

Thermodynamic examination of trinucleotide bulged RNA in the context of HIV-1 TAR RNA

RNA structures contain many bulges and loops that are expected to be sites for inter- and intra-molecular interactions. Nucleotides in the bulge are expected to influence the structure and recognition of RNA. The same stability is assigned to all trinucleotide bulged RNA in the current secondary structure prediction models. In this study thermal denaturation experiments were performed on four trinucleotide bulged RNA, in the context of HIV-1 TAR RNA, to determine whether the bulge sequence affects RNA stability and its divalent ion interactions. Cytosine-rich bulged RNA were more stable than uracil-rich bulged RNA in 1 M KCl. Interactions of divalent ions were more favorable with uracil-rich bulged RNA by approximately 2 kcal/mol over cytosine-rich bulged RNA. The UCU-TAR RNA (wild type) is stabilized by 1.7 kcal/mol in 9.5 mM Ca(2+) as compared with 1 M KCl, whereas no additional gain in stability is measured for CCC-TAR RNA. These results have implications for base substitution experiments traditionally employed to identify metal ion binding sites. To our knowledge, this is the first systematic study to quantify the effect of small sequence changes on RNA stability upon interactions with divalent ions.

PNA based artificial nucleases displaying catalysis with turnover in the cleavage of a leukemia related RNA model

Several peptide nucleic acid based artificial nucleases (PNAzymes) are designed to create a bulge in the target RNA, which is a short model of the leukemia related bcr/abl mRNA. The target RNA is cleaved by the PNAzymes with a half-life of down to 11 h (using a 1 : 1 ratio of PNA-conjugate to target) and only upon base-pairing with the substrate. The PNA based systems are also shown to act in a catalytic fashion with turnover of substrate and are thus the first reported peptide nucleic acid based artificial RNA-cleaving enzymes.

Formation and Stability of Mononuclear and Dinuclear Eu(III) Complexes and Their Catalytic Reactivity Toward Cleavage of an RNA Analog

The complex between Eu(III) and 1,7-diaza-4,10,13-trioxacyclopentadecane-N,N'-diacetic acid (L4) was characterized by pH potentiometric titration and 1H NMR spectroscopy. The conversion of the monomer to a dimeric complex is observed as the pH is increased from 7 to 10 in a reaction that releases one mol/HO- per dimer formed. The dimeric complex undergoes a further ionization with a pKa of 10.7. Kinetic parameters are reported for the cleavage of the simple phosphodiester 2-hydroxypropyl-4-nitrophenyl phosphate catalyzed by both the monomeric and the dimeric Eu(III) complexes. These data show that the monomer and dimer stabilize their bound reaction transition states with similar free energies of 7.1 and 7.6 kcal/mol, respectively. Clearly, a bridging hydroxide is not an optimal linker to promote cooperative catalysis between Eu(III) centers in macrocycles with multiple polyaminocarboxylate pendent groups.

Structural characterization of the 5' untranslated RNA of hepatitis C virus by vibrational spectroscopy

Raman and FTIR spectroscopy have been used to characterize the structure of 5'untranslated region (5'UTR, 342-mer RNA) of the HCV genome. The study of the 750-850 cm(-1) Raman spectral domain of the ribose-phosphate backbone reveals that the percentage of nucleobases involved in double helix-loop junctions is 19+/-1%, which is very close to that of a theoretical secondary structure model (18.7%) proposed on the basis of comparative sequence analysis and thermodynamic modelling. In addition, about 68+/-2% of the bases are helically ordered having C(3')-endo ribofuranose pucker. FTIR-monitored H/D exchange provides the following results: (a) base-paired guanine and cytosine nucleobases show the lowest rate of isotopic exchange, and some synchronous intensity changes of marker bands of A.U pair and single stranded adenine are consistent with the presence of A(*)A.U triplets; (b) the vibrational coupling between the ribose ether C-O stretching and 2'OH bending motions reveals that helical regions of 5'UTR RNA are characterized by hydrogen bonding between the 2'OH ribose groups and the ether oxygen atoms of neighbouring ribose residues.

Synthesis and evaluation of RNA transesterification efficiency using stereospecific serinol-terpyridine conjugates

Six novel artificial ribonucleases were synthesized employing a stereochemically pure abasic serinol backbone residue for attachment of the RNA transesterification agent copper(II) terpyridine. These stereochemically pure abasic residues were synthesized as phosphoramidite building blocks from the parent L-serine and D-serine starting building blocks and incorporated into oligonucleotides via solid-phase DNA synthesis. These artificial ribonucleases were constructed to determine if the stereochemistry of the alpha carbon of an abasic serinol residue has influence over RNA transesterification through selective placement of a pendant transesterification agent in either the major or minor groove. The novel artificial ribonucleases and previously synthesized artificial ribonucleases were challenged with a 28-mer and 159-mer RNA substrate. It was determined that the stereochemistry of the carbon atom derived from the alpha-carbon of serine did not influence the extent of cleavage in these studies using copper(II) terpyridine conjugated artificial ribonucleases.

Site-selective DNA hydrolysis by Ce(IV)-EDTA with the use of one oligonucleotide additive bearing two monophosphates

Two deoxyuridine derivatives each bearing a monophosphate group at the 5-position with a C3 linker, were incorporated into an oligonucleotide. By using this modified oligonucleotide, a bulge was formed at a predetermined position in a DNA substrate, and two monophosphate groups were placed at both junctions of the bulge. Upon treatment of the mixture with Ce(IV)-EDTA at pH 7.0, the phosphodiester linkages at the bulge site were selectively and efficiently hydrolyzed. The monophosphate groups introduced into the bulge site greatly accelerated site-selective DNA scission. Compared with the previously reported two-additive system, which combines two oligonucleotide additives each with a monophosphate at their termini, the present one-additive system is simpler and more convenient. Furthermore, site-selective DNA hydrolysis by using this one-additive system is successful even at high reaction temperatures (e.g., 55 degrees C). This reflects the thermodynamic stability of the duplexes formed between the substrate and the additive DNA.

Investigation of potential RNA bulge stabilizing elements

As a part of our interest in recognition and cleavage of RNA we carried out thermal melting studies with the aim of screening a number of simple oligonucleotide modifications for their potential as modifying elements for RNA bulge stabilizing oligonucleotides. A specific model system from our studies on oligonucleotide-based artificial nuclease (OBAN) systems was chosen and the bulge size was varied from one to five nucleotides. Introduction of single 2'-modified nucleoside moieties (2'-O-methyl, 2'-deoxy and 2'-deoxy-2'-amino) with different conformational preferences adjacent to the bulge revealed that a higher preference for the north conformers gave more stable bulges across the whole range of bulge sizes. Changing a bulge closing a G-U wobble base pair to a G-C pair resulted in the interesting observation that, although the fully complementary complex and small bulges were highly stabilized, there was little difference in the stability of the larger bulges. The wobble base pair even gave a slight stabilization of the 5 nt bulge system. Introduction of a uridine C-5 linker with a single ammonium group was clearly bulge stabilizing (DeltaT(m) + 4.6 to + 5.4 degrees C for the three most stabilized bulges), although with limited selectivity for different bulge sizes since the fully complementary duplex was also stabilized. Introduction of a naphthoyl group on a 2'-aminolinker mostly gave a destabilizing effect, while introduction of a 5-aminoneocuproine moiety on the same linker resulted in stabilization of all bulges, in particular those with two or four unpaired nucleotides (DeltaT(m) + 3.6 and + 2.9 degrees C respectively). The aromatic groups destabilize the fully complementary duplex, resulting in higher selectivity towards stabilization of bulges. A combination of the studied partial element should be suitable for future designs of modified oligonucleotides that, apart from standard base pairing, can also provide additional non-Watson-Crick recognition of RNA.

Artificial ribonucleases

Mimicking the action of enzymes by simpler and more robust man-made catalysts has long inspired bioorganic chemists. During the past decade, mimics for RNA-cleaving enzymes, ribonucleases, or, more precisely, mimics of ribozymes that cleave RNA in sequence-selective rather than base-selective manner, have received special attention. These artificial ribonucleases are typically oligonucleotides (or their structural analogs) that bear a catalytically active conjugate group and catalyze sequence-selective hydrolysis of RNA phosphodiester bonds.

Modelling molecular stability in the RNA world

RNA secondary structure, stability and melting curves are calculated for a model of a possible ribozyme corresponding to the RNA directed RNA polymerase (ribopolymerase) required in the RNA world. From these calculations, rates of folding and hybridisation are estimated and used in a stochastic simulation of the dynamics of a population of ribopolymerase molecules. Two models are considered: one synthesising a conventional antiparallel reverse complementary transcript and one synthesising a parallel complementary transcript. It was found that the latter system can operate much more effective in the higher temperatures thought to prevail during the RNA world.

Oligonucleotide bearing ethylenediamine-N,N,N'-Triacetates for gap-selective DNA hydrolysis by Ce4+/EDTA

With the use of two oligonucleotides bearing ethylenediamine-N,N,N'-triacetate groups as additives, gap sites were formed at predetermined sites in substrate DNA. Upon treating these systems with a Ce(4+)/EDTA complex at pH 7.0 and 37 degrees C, the phosphodiester linkages at the gap site were selectively hydrolyzed. The DNA scission was greatly promoted by the introduction of ethylenediaminetriacetate groups, and the scission efficiency increased as the number of these groups increased. Even a one-base gap was successfully hydrolyzed when three ethylenediaminetriacetate groups were placed consecutively at both edges of the gap, although the scission was minimal in the absence of these groups. The site-selective scission could be also achieved at higher temperatures without any significant loss of site-selectivity.

Enhanced RNA cleavage within bulge-loops by an artificial ribonuclease

Cleavage of phosphodiester bonds by small ribonuclease mimics within different bulge-loops of RNA was investigated. Bulge-loops of different size (1–7 nt) and sequence composition were formed in a 3′ terminal fragment of influenza virus M2 RNA (96 nt) by hybridization of complementary oligodeoxynucleotides. Small bulges (up to 4 nt) were readily formed upon oligonucleotide hybridization, whereas hybridization of the RNA to the oligonucleotides designed to produce larger bulges resulted in formation of several alternative structures. A synthetic ribonuclease mimic displaying Pyr–Pu cleavage specificity cleaved CpA motifs located within bulges faster than similar motifs within the rest of the RNA. In the presence of 10 mM MgCl₂, 75% of the cleavage products resulted from the attack of this motif. Thus, selective RNA cleavage at a single target phosphodiester bond was achieved by using bulge forming oligonucleotides and a small ribonuclease A mimic.

Site-Selective RNA Cleavage by DNA Bearing a Base Pair-Mimic Nucleoside

We have synthesized the deoxyadenosine derivative tethering a phenyl group (X), which mimics the Watson-Crick A/T base pair. The RNA/DNA hybrid duplexes containing X in the middle of the DNA sequence showed a similar thermal stability regardless of the ribonucleotide species (A, G, C, or U) opposite to X, probably because of the phenyl group stacking inside of the duplex accompanied by the opposite ribonucleotide base flipped in an extrahelical position. The RNA strand hybridized with the DNA strand bearing X was cleaved on the 3'-side of the ribonucleotide opposite to X in the presence of MgCl2, and the RNA sequence to be cleaved was not restricted. The site-specific RNA hydrolysis suggests that the DNA strand bearing X has the advantage of the site-selective base flipping in the target sequence and the development of a "universal deoxyribozyme" to exclusively cleave a target RNA sequence.

Characterization of an RNA bulge structure by Fourier transform infrared spectroscopy

There may be several advantages associated with an antisense oligonucleotide that induces a bulged structure into its RNA target molecule. Many structures of RNA bulges are elucidated from single-stranded RNA models. However, a two-component system is the minimum requirement for a realistic antisense model. We have used Fourier transform infrared spectroscopy to investigate a single-stranded RNA oligonucleotide with known NMR solution structure, constructed to model a five nucleotide bulge, and its two-component oligonucleotide counterpart. The infrared spectra show A-helical base-paired stems and non-base-paired loops in both systems. The nucleosides are mainly in an anti-conformation. Both N-type and S-type of sugar puckers can be inferred from the infrared region sensitive to sugar conformations. The S-type of sugar pucker is likely to be associated with the nucleotides in the bulge. The FTIR results display an overall structural similarity between the two model systems.

Site-selective DNA hydrolysis by combining Ce(IV)/EDTA with monophosphate-bearing oligonucleotides and enzymatic ligation of the scission fragments

By using two oligonucleotide additives that bear a monophosphate group at the termini through various linkers, gap structures were formed at predetermined positions in substrate DNA, and the monophosphate groups were placed at both edges of these gaps. At pH 7.0 and 37 degrees C, the phosphodiester linkages in the gap sites were efficiently and selectively hydrolyzed by Ce(IV)/EDTA complex (EDTA = ethylenediamine-N,N,N',N'-tetraacetate). The linkages in the middle of the gaps were predominantly hydrolyzed. Compared with DNA scission using oligonucleotide additives that bear no terminal monophosphate, the present scission was much faster (22-fold for a 3-base gap and 14-fold for a 5-base gap) and more site selective. Introduction of one monophosphate group to either edge of the gaps was also effective for promotion of both site selectivity and scission rate. The monophosphate group(s) at the gap site recruits the Ce(IV) to the target site and magnifies the difference in intrinsic reactivity between the target site and the others. Even at higher reaction temperatures, the site selectivity remained satisfactorily high. Furthermore, the fragments formed by the site-selective scission were connected with various oligonucleotides by using DNA ligase, producing desired recombinant DNAs.

Synthesis of new OBAN's and further studies on positioning of the catalytic group

Two new zinc ion dependent oligonucleotide based artificial nucleases (OBAN's) have been synthesized. These consist of 2'-O-methyl modified RNA oligomers conjugated to 5-amino-2,9-dimethylphenanthroline (neocuproine)via a urea linker. OBAN 4 carries the catalytic group on a linker extending from the C-4 of an internal cytosine moiety. OBAN 5 has two neocuproine units attached, each to linkers extending from the C-5 position of uridine moieties, one placed internally and the other at the at the 5'-end of the oligonucleotide. The key step in the synthesis of the OBAN systems is conjugation of the catalytic group to the respective amino linkers of the modified oligonucleotides. This is achieved by first converting the 5-amino-2,9-dimethylphenanthroline to the phenylcarbamate. The reaction of this neocuproine phenylcarbamate with the oligonucleotide carrying one or two primary aliphatic amines in aqueous buffer (at pH 8.5) leads to nearly quantitative formation of the urea-linked conjugates. Both OBAN systems were found to cleave RNA in the bulged out regions formed from the non-complementary part of the target sequences, in the presence of Zn(II) ions. Differences in efficiency between these and previously reported systems are discussed.

Stabilisation of RNA bulges by oligonucleotide complements containing an adenosine analogue

Incorporation of 2'-deoxy-2'-beta-(1-naphthylmethyl)tubercidin into an oligodeoxyribonucleotide mostly has little or a slightly negative effect on the T(m) values of complexes with DNA complements. With the same naphthylmethyl-substituted nucleoside at the 3'-end of a 2'-O-methyloligoribonucleotide, however, a stabilisation of 1-2 degrees C in the corresponding complexes with both DNA and RNA is observed. When the target sequence is an RNA fragment forming a two- or three-nucleotide bulge, complexes with (naphthylmethyl)tubercidin-modified oligodeoxyribonucleotides, as well as with the corresponding 2'-O-methyloligoribonucleotides, give stabilisations of 1-2 degrees C for the three-nucleotide bulge and of almost 4 degrees C for the two-nucleotide bulge. This stabilisation is specific to RNA, since the corresponding complexes with the DNA fragments do not display this effect. Thus, the (naphthylmethyl)tubercidin-containing oligonucleotides are the first reported oligonucleotide modifications that specifically stabilise bulged RNA.

Oligoamine-acridine conjugates for promotion of gap-selective DNA hydrolysis by Ce(IV)/EDTA complex

Oligoamines (spermidine, dipropylenetriamine and propylenediamine) were covalently attached to acridine via a hexamethylene linker. These oligoamine-acridine conjugates were efficiently bound to gap sites in substrate DNA, and promoted the DNA hydrolysis by a homogeneous Ce(IV)/ethylenediamine-N,N,N',N'-tetraacetate (EDTA) complex at these sites. In contrast, the hydrolysis of the double-stranded portion in the DNA was little affected by these conjugates, although they were strongly bound thereto by the intercalation of their acridine moieties. As a result, the gap site was selectively and efficiently hydrolyzed by combining the Ce(IV)/EDTA complex with the oligoamine--acridine conjugate. Either the oligoamine or the acridine was only poorly active for the purpose, substantiating the essential role of cooperation between them. The promotion of gap-selective DNA hydrolysis by the conjugates has been ascribed to electrostatic stabilization of a negatively charged transition state by their positive charges.

Molecular modeling and dynamics studies of HIV-1 kissing loop structures

Recognition of an RNA loop by another RNA loop is involved in several biological functions. The dimerization of two copies of the HIV-1 genomic RNA is thought to be involved in several steps of the retroviral life cycle. It has been shown that the dimerization of the two HIV-1 RNA genomes is initiated by the so called kissing loop. The 9nt kissing loop consists of a palindromic 6nt sequence that forms Watson-Crick base-pairs at the kissing site in HIV-1. We report the results of our molecular modeling and dynamics studies on two major subtype isolates (MAL and LAI) of HIV-1 kissing loop structures. From our modeling studies, we conclude that the conformation of the loop in the monomer might be closer to the A-RNA-like conformation in order to form an initial kissing structure. This is achieved by the stacking interactions of the bases at the 3' end of the loop and by the intramolecular tertiary interactions of a single linker nucleotide. We discuss the effect of the loop size and the structural limitations on the formation of kissing loop structures. Also, we propose a possible mechanism to convert the kissing loop structure to a stable extended duplex structure without unwinding the stems.

RNA-cleaving DNA enzymes with altered regio- or enantioselectivity

In vitro evolution methods were used to obtain DNA enzymes that cleave either a 2',5'-phosphodiester following a D-ribonucleotide or a 3',5'-phosphodiester following an L-ribonucleotide. Both enzymes can operate in an intermolecular reaction format with multiple turnover. The DNA enzyme that cleaves a 2',5'-phosphodiester exhibits a k(cat) of approximately 0.01 min(-1) and catalytic efficiency, k(cat)/K(m), of approximately 10(8) M(-1) min(-1). The enzyme that cleaves an L-ribonucleotide is about 10-fold slower and has a catalytic efficiency of approximately 4 x 10(5) M(-1) min(-1). Both enzymes require a divalent metal cation for their activity and have optimal catalytic rate at pH 7-8 and 35-50 degrees C. In a comparison of each enzyme's activity with either its corresponding substrate that contains an unnatural ribonucleotide or a substrate that instead contains a standard ribonucleotide, the 2',5'-phosphodiester-cleaving DNA enzyme exhibited a regioselectivity of 6000-fold, while the L-ribonucleotide-cleaving DNA enzyme exhibited an enantioselectivity of 40-fold. These molecules demonstrate how in vitro evolution can be used to obtain regio- and enantioselective catalysts that exhibit specificities for nonnatural analogues of biological compounds.

Preferential hydrolysis of gap and bulge sites in DNA by Ce(IV)/EDTA complex

A new strategy for site-selective DNA hydrolysis, which takes advantage of the difference in reactivity between the phosphodiester linkages at the target site and the others, is presented. As the molecular scissors, homogeneous Ce(IV)/ethylenediamine-N,N,N',N'-tetraacetate (EDTA) complex is used without being bound to any sequence-recognizing moiety. When a gap structure is formed at the target site by using two short oligonucleotides and the composite is treated with the Ce(IV)/EDTA complex at pH 7.0 and 37 degrees C, the gap site in the substrate DNA is preferentially hydrolyzed over the double-stranded portion of the DNA. Site-selective DNA scission is also achieved by forming a bulge structure at the target site with the use of the appropriate oligonucleotide. These site-selective scissions are based on the following two factors: (i) the phosphodiester linkages in a single-stranded DNA are far more susceptible to the hydrolysis by the Ce(IV) complex than are the linkages in double-stranded DNA, and (ii) the phosphodiester linkages in the bulge sites are still more reactive than those in single-stranded DNA. In both cases, the addition of spermine significantly accelerates the scission.