DNA strand exchange mediated by the Escherichia coli RecA protein initiates in the minor groove of double-stranded DNA

How Enzymes, Proteins, and Antibodies Recognize Extended DNAs; General Regularities

X-ray analysis cannot provide quantitative estimates of the relative contribution of non-specific, specific, strong, and weak contacts of extended DNA molecules to their total affinity for enzymes and proteins. The interaction of different enzymes and proteins with long DNA and RNA at the quantitative molecular level can be successfully analyzed using the method of the stepwise increase in ligand complexity (SILC). The present review summarizes the data on stepwise increase in ligand complexity (SILC) analysis of nucleic acid recognition by various enzymes-replication, restriction, integration, topoisomerization, six different repair enzymes (uracil DNA glycosylase, Fpg protein from Escherichia coli, human 8-oxoguanine-DNA glycosylase, human apurinic/apyrimidinic endonuclease, RecA protein, and DNA-ligase), and five DNA-recognizing proteins (RNA helicase, human lactoferrin, alfa-lactalbumin, human blood albumin, and IgGs against DNA). The relative contributions of structural elements of DNA fragments "covered" by globules of enzymes and proteins to the total affinity of DNA have been evaluated. Thermodynamic and catalytic factors providing discrimination of unspecific and specific DNAs by these enzymes on the stages of primary complex formation following changes in enzymes and DNAs or RNAs conformations and direct processing of the catalysis of the reactions were found. General regularities of recognition of nucleic acid by DNA-dependent enzymes, proteins, and antibodies were established.

Cooperative RecA clustering: the key to efficient homology searching

The mechanism by which pre-synaptic RecA nucleoprotein filaments efficiently locate sequence homology across genomic DNA remains unclear. Here, using atomic force microscopy, we directly investigate the intermediates of the RecA-mediated homologous recombination process and find it to be highly cooperative, involving multiple phases. Initially, the process is dominated by a rapid ‘association’ phase, where multiple filaments interact on the same dsDNA simultaneously. This cooperative nature is reconciled by the observation of localized dense clusters of pre-synaptic filaments interacting with the observed dsDNA molecules. This confinement of reactive species within the vicinity of the dsDNA, is likely to play an important role in ensuring that a high interaction rate between the nucleoprotein filaments and the dsDNA can be achieved. This is followed by a slower ‘resolution’ phase, where the synaptic joints either locate sequence homology and progress to a post-synaptic joint, or dissociate from the dsDNA. Surprisingly, the number of simultaneous synaptic joints decreases rapidly after saturation of the dsDNA population, suggesting a reduction in interaction activity of the RecA filaments. We find that the time-scale of this decay is in line with the time-scale of the dispersion of the RecA filament clusters, further emphasising the important role this cooperative phenomena may play in the RecA-facilitated homology search.

A Single-Strand Annealing Protein Clamps DNA to Detect and Secure Homology

Repair of DNA breaks by single-strand annealing (SSA) is a major mechanism for the maintenance of genomic integrity. SSA is promoted by proteins (single-strand-annealing proteins [SSAPs]), such as eukaryotic RAD52 and λ phage Redβ. These proteins use a short single-stranded region to find sequence identity and initiate homologous recombination. However, it is unclear how SSAPs detect homology and catalyze annealing. Using single-molecule experiments, we provide evidence that homology is recognized by Redβ monomers that weakly hold single DNA strands together. Once annealing begins, dimerization of Redβ clamps the double-stranded region and nucleates nucleoprotein filament growth. In this manner, DNA clamping ensures and secures a successful detection for DNA sequence homology. The clamp is characterized by a structural change of Redβ and a remarkable stability against force up to 200 pN. Our findings not only present a detailed explanation for SSAP action but also identify the DNA clamp as a very stable, noncovalent, DNA-protein interaction.

Real-time observation of strand exchange reaction with high spatiotemporal resolution

RecA binds to single-stranded (ss) DNA to form a helical filament that catalyzes strand exchange with a homologous double-stranded (ds) DNA. The study of strand exchange in ensemble assays is limited by the diffusion limited homology search process, which masks the subsequent strand exchange reaction. We developed a single-molecule fluorescence assay with a few base-pair and millisecond resolution that can separate initial docking from the subsequent propagation of joint molecule formation. Our data suggest that propagation occurs in 3 bp increments with destabilization of the incoming dsDNA and concomitant pairing with the reference ssDNA. Unexpectedly, we discovered the formation of a dynamic complex between RecA and the displaced DNA that remains bound transiently after joint molecule formation. This finding could have important implications for the irreversibility of strand exchange. Our model for strand exchange links structural models of RecA to its catalytic function.

Structural, thermodynamic, and kinetic basis for the activities of some nucleic acid repair enzymes

X-ray structural analysis provides no quantitative estimate of the relative contribution of specific and nonspecific or strong and weak interactions to the total affinity of enzymes for nucleic acids. We have shown that the interaction between enzymes and long nucleic acids at the molecular level can be successfully analyzed by the method of stepwise increase in ligand complexity (SILC). In the present review we summarize our studies of human uracil DNA glycosylase and apurinic/apyrimidinic endonuclease, E. coli 8-oxoguanine DNA glycosylase and RecA protein using the SILC approach. The relative contribution of structural (X-ray analysis data), thermodynamic, and catalytic factors to the discrimination of specific and nonspecific DNA by these enzymes at the stages of complex formation, the following changes in DNA and enzyme conformations and especially the catalysis of the reactions is discussed.

Main factors providing specificity of repair enzymes

Specific and nonspecific DNA complex formation with human uracil-DNA glycosylase, 8-oxoguanine-DNA glycosylase, and apurine/apyrimidine endonuclease, as well as with E. coli 8-oxoguanine-DNA glycosylase and RecA protein was analyzed using the method of stepwise increase in DNA-ligand complexity. It is shown that high affinity of these enzymes to any DNA (10(-4)-10(-8) M) is provided by a large number of weak additive contacts mainly with DNA internucleoside phosphate groups and in a less degree with bases of nucleotide links "covered" by protein globules. Enzyme interactions with specific DNA links are comparable in efficiency with weak unspecific contacts and provide only for one-two orders of affinity (10(-1)-10(-2) M), but these contacts are extremely important at stages of DNA and enzyme structural adaptation and catalysis proper. Only in the case of specific DNA individual for each enzyme alterations in DNA structure provide for efficient adjustment of reacting enzyme atoms and DNA orbitals with accuracy up to 10-15° and, as a result, for high reaction rate. Upon transition from nonspecific to specific DNA, reaction rate (k(cat)) increases by 4-8 orders of magnitude. Thus, stages of DNA and enzyme structural adaptation as well as catalysis proper are the basis of specificity of repair enzymes.

Modeling the early stage of DNA sequence recognition within RecA nucleoprotein filaments

Homologous recombination is a fundamental process enabling the repair of double-strand breaks with a high degree of fidelity. In prokaryotes, it is carried out by RecA nucleofilaments formed on single-stranded DNA (ssDNA). These filaments incorporate genomic sequences that are homologous to the ssDNA and exchange the homologous strands. Due to the highly dynamic character of this process and its rapid propagation along the filament, the sequence recognition and strand exchange mechanism remains unknown at the structural level. The recently published structure of the RecA/DNA filament active for recombination (Chen et al., Mechanism of homologous recombination from the RecA-ssDNA/dsDNA structure, Nature 2008, 453, 489) provides a starting point for new exploration of the system. Here, we investigate the possible geometries of association of the early encounter complex between RecA/ssDNA filament and double-stranded DNA (dsDNA). Due to the huge size of the system and its dense packing, we use a reduced representation for protein and DNA together with state-of-the-art molecular modeling methods, including systematic docking and virtual reality simulations. The results indicate that it is possible for the double-stranded DNA to access the RecA-bound ssDNA while initially retaining its Watson–Crick pairing. They emphasize the importance of RecA L2 loop mobility for both recognition and strand exchange.

Homologous recombination in real time: DNA strand exchange by RecA

Homologous recombination, the exchange of strands between different DNA molecules, is essential for proper maintenance and accurate duplication of the genome. Using magnetic tweezers, we monitor RecA-driven homologous recombination of individual DNA molecules in real time. We resolve several key aspects of DNA structure during and after strand exchange. Changes in DNA length and twist yield helical parameters for the protein-bound three-stranded structure in conditions in which ATP was not hydrolyzed. When strand exchange was completed under ATP hydrolysis conditions that allow protein dissociation, a "D wrap" structure formed. During homologous recombination, strand invasion at one end and RecA dissociation at the other end occurred at the same rate, and our single-molecule analysis indicated that a region of only about 80 bp is actively involved in the synapsis at any time during the entire reaction involving a long ( approximately 1 kb) region of homology.

RecA-DNA filament topology: the overlooked alternative of an unconventional syn-syn duplex intermediate

The helical filaments of RecA protein mediate strand exchange for homologous recombination, but the paths of the interacting DNAs have yet to be determined. Although this interaction is commonly limited to three strands, it is reasoned here that the intrinsic symmetry relationships of quadruplex topology are superior in explaining a range of observations. In particular, this topology suggests the potential of post-exchange base pairing in the unorthodox configuration of syn-syn glycosidic bonds between the nucleotide bases and the pentose rings in the sugar-phosphate backbone, which would transiently be stabilized by the external scaffolding of the RecA protein filament.

A RecA-mediated exon profiling method

We have developed a RecA-mediated simple, rapid and scalable method for identifying novel alternatively spliced full-length cDNA candidates. This method is based on the principle that RecA proteins allow to carry radioisotope-labeled probe DNAs to their homologous sequences, resulting in forming triplexes. The resulting complex is easily detected by mobility difference on electrophoresis. We applied this exon profiling method to four selected mouse genes as a feasibility study. To design probes for detection, the information on known exonic regions was extracted from public database, RefSeq. Concerning the potentially transcribed novel exonic regions, RNA mapping experiment using Affymetrix tiling array was performed. As a result, we were able to identify alternative splice variants of Thioredoxin domain containing 5, Interleukin1β, Interleukin 1 family 6 and glutamine-rich hypothetical protein. In addition, full-length sequencing demonstrated that our method could profile exon structures with >90% accuracy. This reliable method can allow us to screen novel splice variants from a huge number of cDNA clone set effectively.

Origins of sequence selectivity in homologous genetic recombination: insights from rapid kinetic probing of RecA-mediated DNA strand exchange

Despite intense effort over the past 30 years, the molecular determinants of sequence selectivity in RecA-mediated homologous recombination have remained elusive. Here, we describe when and how sequence homology is recognized between DNA strands during recombination in the context of a kinetic model for RecA-mediated DNA strand exchange. We characterized the transient intermediates of the reaction using pre-steady-state kinetic analysis of strand exchange using oligonucleotide substrates containing a single fluorescent G analog. We observed that the reaction system was sensitive to heterology between the DNA substrates; however, such a "heterology effect" was not manifest when functional groups were added to or removed from the edges of the base-pairs facing the minor groove of the substrate duplex. Hence, RecA-mediated recombination must occur without the involvement of a triple helix, even as a transient intermediate in the process. The fastest detectable reaction phase was accelerated when the structure or stability of the substrate duplex was perturbed by internal mismatches or the replacement of G.C by I.C base-pairs. These findings indicate that the sequence specificity in recombination is achieved by Watson-Crick pairing in the context of base-pair dynamics inherent to the extended DNA structure bound by RecA during strand exchange.

Construction and evaluation of a kinetic scheme for RecA-mediated DNA strand exchange

The Escherichia coli RecA protein is the prototype of a class of proteins playing a central role in genomic repair and recombination in all organisms. The unresolved mechanistic strategy by which RecA aligns a single strand of DNA with a duplex DNA and mediates a DNA strand switch is central to understanding its recombinational activities. Toward a molecular-level understanding of RecA-mediated DNA strand exchange, we explored its mechanism using oligonucleotide substrates and the intrinsic fluorescence of 6-methylisoxanthopterin (6MI). Steady- and presteady-state spectrofluorometric data demonstrate that the reaction proceeds via a sequential four-step mechanism comprising a rapid, bimolecular association step followed by three slower unimolecular steps. Previous authors have proposed multistep mechanisms involving two or three steps. Careful analysis of the differences among the experimental systems revealed a previously undiscovered intermediate (N1) whose formation may be crucial in the kinetic discrimination of homologous and heterologous sequences. This observation has important implications for probing the fastest events in DNA strand exchange using 6MI to further elucidate the molecular mechanisms of recombination and recombinational repair.

Formation of nucleoprotein RecA filament on single-stranded DNA. Analysis by stepwise increase in ligand complexity

RecA protein plays a pivotal role in homologous recombination in Escherichia coli. RecA polymerizes on single-stranded (ss) DNA forming a nucleoprotein filament. Then double-stranded (ds) DNA is bound and searched for segments homologous to the ssDNA. Finally, homologous strands are exchanged, a new DNA duplex is formed, and ssDNA is displaced. We report a quantitative analysis of RecA interactions with ss d(pN)n of various structures and lengths using these oligonucleotides as inhibitors of RecA filamentation on d(pT)20. DNA recognition appears to be mediated by weak interactions between its structural elements and RecA monomers within a filament. Orthophosphate and dNMP are minimal inhibitors of RecA filamentation (I50 = 12-20 mM). An increase in homo-d(pN)2-40 length by one unit improves their affinity for RecA (f factor) approximately twofold through electrostatic contacts of RecA with internucleoside phosphate DNA moieties (f approximately = 1.56) and specific interactions with T or C bases (f approximately = 1.32); interactions with adenine bases are negligible. RecA affinity for d(pN)n containing normal or modified nucleobases depends on the nature of the base, features of the DNA structure. The affinity considerably increases if exocyclic hydrogen bond acceptor moieties are present in the bases. We analyze possible reasons underlying RecA preferences for DNA sequence and length and propose a model for recognition of ssDNA by RecA.

The bacterial RecA protein and the recombinational DNA repair of stalled replication forks

The primary function of bacterial recombination systems is the nonmutagenic repair of stalled or collapsed replication forks. The RecA protein plays a central role in these repair pathways, and its biochemistry must be considered in this context. RecA protein promotes DNA strand exchange, a reaction that contributes to fork regression and DNA end invasion steps. RecA protein activities, especially formation and disassembly of its filaments, affect many additional steps. So far, Escherichia coli RecA appears to be unique among its nearly ubiquitous family of homologous proteins in that it possesses a motorlike activity that can couple the branch movement in DNA strand exchange to ATP hydrolysis. RecA is also a multifunctional protein, serving in different biochemical roles for recombinational processes, SOS induction, and mutagenic lesion bypass. New biochemical and structural information highlights both the similarities and distinctions between RecA and its homologs. Increasingly, those differences can be rationalized in terms of biological function.

Elucidating a key intermediate in homologous DNA strand exchange: structural characterization of the RecA-triple-stranded DNA complex using fluorescence resonance energy transfer

The RecA protein of Escherichia coli plays essential roles in homologous recombination and restarting stalled DNA replication forks. In vitro, the protein mediates DNA strand exchange between single-stranded (ssDNA) and homologous double-stranded DNA (dsDNA) molecules that serves as a model system for the in vivo processes. To date, no high-resolution structure of the key intermediate, comprised of three DNA strands simultaneously bound to a RecA filament (RecA-tsDNA complex), has been reported. We present a systematic characterization of the helical geometries of the three DNA strands of the RecA-tsDNA complex using fluorescence resonance energy transfer (FRET) under physiologically relevant solution conditions. FRET donor and acceptor dyes were used to label different DNA strands, and the interfluorophore distances were inferred from energy transfer efficiencies measured as a function of the base-pair separation between the two dyes. The energy transfer efficiencies were first measured on a control RecA-dsDNA complex, and the calculated helical parameters (h approximately 5 A, Omega(h) approximately 20 degrees ) were consistent with structural conclusions derived from electron microscopy (EM) and other classic biochemical methods. Measurements of the helical parameters for the RecA-tsDNA complex revealed that all three DNA strands adopt extended and unwound conformations similar to those of RecA-bound dsDNA. The structural data are consistent with the hypothesis that this complex is a late, post-strand-exchange intermediate with the outgoing strand shifted by about three base-pairs with respect to its registry with the incoming and complementary strands. Furthermore, the bases of the incoming and complementary strands are displaced away from the helix axis toward the minor groove of the heteroduplex, and the bases of the outgoing strand lie in the major groove of the heteroduplex. We present a model for the strand exchange intermediate in which homologous contacts preceding strand exchange arise in the minor groove of the substrate dsDNA.

The stretched DNA geometry of recombination and repair nucleoprotein filaments

The RecA protein of Escherichia coli plays essential roles in homologous recombination and restarting stalled DNA replication forks. In vitro, the protein mediates DNA strand exchange between single-stranded (ssDNA) and homologous double-stranded DNA (dsDNA) molecules that serves as a model system for the in vivo processes. To date, no high-resolution structure of the key intermediate, comprised of three DNA strands simultaneously bound to a RecA filament (RecA x tsDNA complex), has been elucidated by classical methods. Here we review the systematic characterization of the helical geometries of the three DNA strands of the RecA x tsDNA complex using fluorescence resonance energy transfer (FRET) under physiologically relevant solution conditions. Measurements of the helical parameters for the RecA x tsDNA complex are consistent with the hypothesis that this complex is a late, poststrand-exchange intermediate with the outgoing strand shifted by about three base pairs with respect to its registry with the incoming and complementary strands. All three strands in the RecA x tsDNA complex adopt extended and unwound conformations similar to those of RecA-bound ssDNA and dsDNA.

DNA pairing and strand exchange by the Escherichia coli RecA and yeast Rad51 proteins without ATP hydrolysis: on the importance of not getting stuck

The bacterial RecA protein and the homologous Rad51 protein in eukaryotes both bind to single-stranded DNA (ssDNA), align it with a homologous duplex, and promote an extensive strand exchange between them. Both reactions have properties, including a tolerance of base analog substitutions that tend to eliminate major groove hydrogen bonding potential, that suggest a common molecular process underlies the DNA strand exchange promoted by RecA and Rad51. However, optimal conditions for the DNA pairing and DNA strand exchange reactions promoted by the RecA and Rad51 proteins in vitro are substantially different. When conditions are optimized independently for both proteins, RecA promotes DNA pairing reactions with short oligonucleotides at a faster rate than Rad51. For both proteins, conditions that improve DNA pairing can inhibit extensive DNA strand exchange reactions in the absence of ATP hydrolysis. Extensive strand exchange requires a spooling of duplex DNA into a recombinase-ssDNA complex, a process that can be halted by any interaction elsewhere on the same duplex that restricts free rotation of the duplex and/or complex, I.e. the reaction can get stuck. Optimization of an extensive DNA strand exchange without ATP hydrolysis requires conditions that decrease nonproductive interactions of recombinase-ssDNA complexes with the duplex DNA substrate.

Homologous genetic recombination as an intrinsic dynamic property of a DNA structure induced by RecA/Rad51-family proteins: a possible advantage of DNA over RNA as genomic material

Heteroduplex joints are general intermediates of homologous genetic recombination in DNA genomes. A heteroduplex joint is formed between a single-stranded region (or tail), derived from a cleaved parental double-stranded DNA, and homologous regions in another parental double-stranded DNA, in a reaction mediated by the RecA/Rad51-family of proteins. In this reaction, a RecA/Rad51-family protein first forms a filamentous complex with the single-stranded DNA, and then interacts with the double-stranded DNA in a search for homology. Studies of the three-dimensional structures of single-stranded DNA bound either to Escherichia coli RecA or Saccharomyces cerevisiae Rad51 have revealed a novel extended DNA structure. This structure contains a hydrophobic interaction between the 2' methylene moiety of each deoxyribose and the aromatic ring of the following base, which allows bases to rotate horizontally through the interconversion of sugar puckers. This base rotation explains the mechanism of the homology search and base-pair switch between double-stranded and single-stranded DNA during the formation of heteroduplex joints. The pivotal role of the 2' methylene-base interaction in the heteroduplex joint formation is supported by comparing the recombination of RNA genomes with that of DNA genomes. Some simple organisms with DNA genomes induce homologous recombination when they encounter conditions that are unfavorable for their survival. The extended DNA structure confers a dynamic property on the otherwise chemically and genetically stable double-stranded DNA, enabling gene segment rearrangements without disturbing the coding frame (i.e., protein-segment shuffling). These properties may give an extensive evolutionary advantage to DNA.

Topological testing of the mechanism of homology search promoted by RecA protein

To initiate homologous recombination, sequence similarity between two DNA molecules must be searched for and homology recognized. How the search for and recognition of homology occurs remains unproven. We have examined the influences of DNA topology and the polarity of RecA-single-stranded (ss)DNA filaments on the formation of synaptic complexes promoted by RecA. Using two complementary methods and various ssDNA and duplex DNA molecules as substrates, we demonstrate that topological constraints on a small circular RecA-ssDNA filament prevent it from interwinding with its duplex DNA target at the homologous region. We were unable to detect homologous pairing between a circular RecA-ssDNA filament and its relaxed or supercoiled circular duplex DNA targets. However, the formation of synaptic complexes between an invading linear RecA-ssDNA filament and covalently closed circular duplex DNAs is promoted by supercoiling of the duplex DNA. The results imply that a triplex structure formed by non-Watson-Crick hydrogen bonding is unlikely to be an intermediate in homology searching promoted by RecA. Rather, a model in which RecA-mediated homology searching requires unwinding of the duplex DNA coupled with local strand exchange is the likely mechanism. Furthermore, we show that polarity of the invading RecA-ssDNA does not affect its ability to pair and interwind with its circular target duplex DNA.

Radioprobing of a RecA-three-stranded DNA complex with iodine 125: evidence for recognition of homology in the major groove of the target duplex

A fundamental problem in homologous recombination is how homology between DNAs is recognized. In all current models, a recombination protein loads onto a single strand of DNA and scans another duplex for homology. When homology is found, a synaptic complex is formed, leading to strand exchange and a heteroduplex. A novel technique based on strand cleavage by the Auger radiodecay of iodine 125, allows us to determine the distances between (125)I on the incoming strand and the target sugars of the duplex DNA strands in an Escherichia coli RecA protein-mediated synaptic complex. Analysis of these distances shows that the complex represents a post-strand exchange intermediate in which the heteroduplex is located in the center, while the outgoing strand forms a relatively wide helix intertwined with the heteroduplex and located in its minor groove. The structure implies that homology is recognized in the major groove of the duplex.

Modeling DNA deformations

Recent developments have been made in modeling double-helical DNA at four levels of three-dimensional structure: the all-atom level, whereby an oligonucleotide duplex is surrounded by a shroud of solvent molecules; the base-pair level, with explicit backbone atoms; the mesoscopic level, that is, a few hundred base pairs, with the local duplex conformation described by knowledge-based harmonic energy functions; and the scale of several thousand nucleotides, with the duplex described as an ideal elastic rod. Predictions of the sequence-dependent bending and twisting of the double helix, as well as solvent- and force-induced B-->A and over-stretching conformational transitions, are compared with experimental data. These subtle conformational changes are critical to the functioning of the double helix, including its packaging in the close confines of the cell, the mutual fit of DNA and protein in nucleoprotein complexes, and the effective recognition of base pairs in recombination and transcription.

No braiding of Holliday junctions in positively supercoiled DNA molecules

The Holliday junction is a prominent intermediate in genetic recombination that consists of four double helical arms of DNA flanking a branch point. Under many conditions, the Holliday junction arranges its arms into two stacked domains that can be oriented so that genetic markers are parallel or antiparallel. In this arrangement, two strands retain a helical conformation, and the other two strands effect the crossover between helical domains. The products of recombination are altered by a crossover isomerization event, which switches the strands fulfilling these two roles. It appears that effecting this switch from the parallel conformation by the simplest mechanism results in braiding the crossover strands at the branch point. In previous work we showed by topological means that a short, parallel, DNA double crossover molecule with closed ends did not braid its branch point; however, that molecule was too short to adopt the necessary positively supercoiled topology. Here, we have addressed the same problem using a larger molecule of the same type. We have constructed a parallel DNA double crossover molecule with closed ends, containing 14 double helical turns in each helix between its crossover points. We have prepared this molecule in a relaxed form by simple ligation and in a positively supercoiled form by ligation in the presence of netropsin. The positively supercoiled molecule is of the right topology to accommodate braiding. We have compared the relaxed and supercoiled versions for their responses to probes that include hydroxyl radicals, KMnO4, the junction resolvases endonuclease VII and RuvC, and RuvC activation of KMNO4 sensitivity. In no case did we find evidence for a braid at the crossover point. We conclude that Holliday junctions do not braid at their branch points, and that the topological problem created by crossover isomerization in the parallel conformation is likely to be solved by distributing the stress over the helices that flank the branch point.

Rapid exchange of A:T base pairs is essential for recognition of DNA homology by human Rad51 recombination protein

Human Rad51 belongs to a ubiquitous family of proteins that enable a single strand to recognize homology in duplex DNA, and thereby to initiate genetic exchanges and DNA repair, but the mechanism of recognition remains unknown. Kinetic analysis by fluorescence resonance energy transfer combined with the study of base substitutions and base mismatches reveals that recognition of homology, helix destabilization, exchange of base pairs, and initiation of strand exchange are integral parts of a rapid, concerted mechanism in which A:T base pairs play a critical role. Exchange of base pairs is essential for recognition of homology, and physical evidence indicates that such an exchange occurs early enough to mediate recognition.

Recombinational DNA repair in bacteria and the RecA protein

In bacteria, the major function of homologous genetic recombination is recombinational DNA repair. This is not a process reserved only for rare double-strand breaks caused by ionizing radiation, nor is it limited to situations in which the SOS response has been induced. Recombinational DNA repair in bacteria is closely tied to the cellular replication systems, and it functions to repair damage at stalled replication forks, Studies with a variety of rec mutants, carried out under normal aerobic growth conditions, consistently suggest that at least 10-30% of all replication forks originating at the bacterial origin of replication are halted by DNA damage and must undergo recombinational DNA repair. The actual frequency may be much higher. Recombinational DNA repair is both the most complex and the least understood of bacterial DNA repair processes. When replication forks encounter a DNA lesion or strand break, repair is mediated by an adaptable set of pathways encompassing most of the enzymes involved in DNA metabolism. There are five separate enzymatic processes involved in these repair events: (1) The replication fork assembled at OriC stalls and/or collapses when encountering DNA damage. (2) Recombination enzymes provide a complementary strand for a lesion isolated in a single-strand gap, or reconstruct a branched DNA at the site of a double-strand break. (3) The phi X174-type primosome (or repair primosome) functions in the origin-independent reassembly of the replication fork. (4) The XerCD site-specific recombination system resolves the dimeric chromosomes that are the inevitable by-product of frequent recombination associated with recombinational DNA repair. (5) DNA excision repair and other repair systems eliminate lesions left behind in double-stranded DNA. The RecA protein plays a central role in the recombination phase of the process. Among its many activities, RecA protein is a motor protein, coupling the hydrolysis of ATP to the movement of DNA branches.

A molecular model for RecA-promoted strand exchange via parallel triple-stranded helices

A number of studies have concluded that strand exchange between a RecA-complexed DNA single strand and a homologous DNA duplex occurs via a single-strand invasion of the minor groove of the duplex. Using molecular modeling, we have previously demonstrated the possibility of forming a parallel triple helix in which the single strand interacts with the intact duplex in the minor groove, via novel base interactions (Bertucat et al., J. Biomol. Struct. Dynam. 16:535-546). This triplex is stabilized by the stretching and unwinding imposed by RecA. In the present study, we show that the bases within this triplex are appropriately placed to undergo strand exchange. Strand exchange is found to be exothermic and to result in a triple helix in which the new single strand occupies the major groove. This structure, which can be equated to so-called R-form DNA, can be further stabilized by compression and rewinding. We are consequently able to propose a detailed, atomic-scale model of RecA-promoted strand exchange. This model, which is supported by a variety of experimental data, suggests that the role of RecA is principally to prepare the single strand for its future interactions, to guide a minor groove attack on duplex DNA, and to stabilize the resulting, stretched triplex, which intrinsically favors strand exchange. We also discuss how this mechanism can incorporate homologous recognition.

DNA stretching and compression: large-scale simulations of double helical structures

Computer-simulated elongation and compression of A - and B -DNA structures beyond the range of thermal fluctuations provide new insights into high energy "activated" forms of DNA implicated in biochemical processes, such as recombination and transcription. All-atom potential energy studies of regular poly(dG).poly(dC) and poly(dA).poly(dT) double helices, stretched from compressed states of 2.0 A per base-pair step to highly extended forms of 7.0 A per residue, uncover four different hyperfamilies of right-handed structures that differ in mutual base-pair orientation and sugar-phosphate backbone conformation. The optimized structures embrace all currently known right-handed forms of double-helical DNA identified in single crystals as well as non-canonical forms, such as the original "Watson-Crick" duplex with trans conformations about the P-O5' and C5'-C4' backbone bonds. The lowest energy minima correspond to canonical A and B -form duplexes. The calculations further reveal a number of unusual helical conformations that are energetically disfavored under equilibrium conditions but become favored when DNA is highly stretched or compressed. The variation of potential energy versus stretching provides a detailed picture of dramatic conformational changes that accompany the transitions between various families of double-helical forms. In particular, the interchanges between extended canonical and non-canonical states are reminiscent of the cooperative transitions identified by direct stretching experiments. The large-scale, concerted changes in base-pair inclination, brought about by changes in backbone and glycosyl torsion angles, could easily give rise to the observed sharp increase in force required to stretch single DNA molecules more than 1.6-1.65 times their canonical extension. Our extended duplexes also help to tie together a number of previously known structural features of the RecA-DNA complex and offer a self-consistent stereochemical model for the single-stranded/duplex DNA recognition brought in register by recombination proteins. The compression of model duplexes, by contrast, yields non-canonical structures resembling the deformed steps in crystal complexes of DNA with the TATA-box binding protein (TBP). The crystalline TBP-bound DNA steps follow the calculated compression-elongation pattern of an unusual "vertical" duplex with base planes highly inclined with respect to the helical axis, exposed into the minor groove, and accordingly accessible for recognition.Significantly, the double helix can be stretched by a factor of two and compressed roughly in half before its computed internal energy rises sharply. The energy profiles show that DNA extension-compression is related not only to the variation of base-pair Rise but also to concerted changes of Twist, Roll, and Slide. We suggest that the high energy "activated" forms calculated here are critical for DNA processing, e.g. nucleo-protein recognition, DNA/RNA synthesis, and strand exchange.

The simultaneous binding of two double-stranded DNA molecules by Escherichia coli RecA protein

We have characterized the double-stranded DNA (dsDNA) binding properties of RecA protein, using an assay based on changes in the fluorescence of 4',6-diamidino-2-phenylindole (DAPI)-dsDNA complexes. Here we use fluorescence, nitrocellulose filter-binding, and DNase I-sensitivity assays to demonstrate the binding of two duplex DNA molecules by the RecA protein filament. We previously established that the binding stoichiometry for the RecA protein-dsDNA complex is three base-pairs per RecA protein monomer, in the presence of ATP. In the presence of ATPgammaS, however, the binding stoichiometry depends on the MgCl2 concentration. The stoichiometry is 3 bp per monomer at low MgCl2 concentrations, but changes to 6 bp per monomer at higher MgCl2 concentrations, with the transition occurring at approximately 5 mM MgCl2. Above this MgCl2 concentration, the dsDNA within the RecA nucleoprotein complex becomes uncharacteristically sensitive to DNase I digestion. For these reasons we suggest that, at the elevated MgCl2 conditions, the RecA-dsDNA nucleoprotein filament can bind a second equivalent of dsDNA. These results demonstrate that RecA protein has the capacity to bind two dsDNA molecules, and they suggest that RecA or RecA-like proteins may effect homologous recognition between intact DNA duplexes.

Base pair switching by interconversion of sugar puckers in DNA extended by proteins of RecA-family: a model for homology search in homologous genetic recombination

Escherichia coli RecA is a representative of proteins from the RecA family, which promote homologous pairing and strand exchange between double-stranded DNA and single-stranded DNA. These reactions are essential for homologous genetic recombination in various organisms. From NMR studies, we previously reported a novel deoxyribose-base stacking interaction between adjacent residues on the extended single-stranded DNA bound to RecA protein. In this study, we found that the same DNA structure was induced by the binding to Saccharomyces cerevisiae Rad51 protein, indicating that the unique DNA structure induced by the binding to RecA-homologs was conserved from prokaryotes to eukaryotes. On the basis of this structure, we have formulated the structure of duplex DNA within filaments formed by RecA protein and its homologs. Two types of molecular structures are presented. One is the duplex structure that has the N-type sugar pucker. Its helical pitch is approximately 95 A (18.6 bp/turn), corresponding to that of an active, or ATP-form of the RecA filament. The other is one that has the S-type sugar pucker. Its helical pitch is approximately 64 A (12.5 bp/turn), corresponding to that of an inactive, or ADP-form of the RecA filament. During this modeling, we found that the interconversion of sugar puckers between the N-type and the S-type rotates bases horizontally, while maintaining the deoxyribose-base stacking interaction. We propose that this base rotation enables base pair switching between double-stranded DNA and single-stranded DNA to take place, facilitating homologous pairing and strand exchange. A possible mechanism for strand exchange involving DNA rotation also is discussed.

The role of negative superhelicity and length of homology in the formation of paranemic joints promoted by RecA protein

Escherichia coli RecA protein pairs homologous DNA molecules to form paranemic joints when there is an absence of a free end in the region of homologous contact. Paranemic joints are a key intermediate in homologous recombination and are important in understanding the mechanism for a search of homology. The efficiency of paranemic joint formation depended on the length of homology and the topological forms of the duplex DNA. The presence of negative superhelicity increased the pairing efficiency and reduced the minimal length of homology required for paranemic joint formation. Negative superhelicity stimulated joint formation by favoring the initial unwinding of duplex DNA that occurred during the homology search and was not essential in the maintenance of the paired structure. Regardless of length of homology, formation of paranemic joints using circular duplex DNA required the presence of more than six negative supercoils. Above six negative turns, an increasing degree of negative superhelicity resulted in a linear increase in the pairing efficiency. These results support a model of two distinct kinds of DNA unwinding occurring in paranemic joint formation: an initial unwinding caused by heterologous contacts during synapsis and a later one during pairing of the homologous molecules.

On the mechanism of RecA-mediated repair of double-strand breaks: no role for four-strand DNA pairing intermediates

RecA protein will bind to a gapped duplex DNA molecule and promote a DNA strand exchange with a second homologous linear duplex. A double-strand break in the second duplex is efficiently bypassed in the course of these reactions. We demonstrate that the bypass of double-strand breaks is not explained by a mechanism involving homologous interactions between two duplex DNA molecules, but instead requires the ATP-mediated generation of DNA torsional stress brought about by the action of RecA. The results suggest new pathways for the repair of double-strand breaks and underline the need for new paradigms to explain the alignment of homologous DNAs during genetic recombination.