Structure-function relationships in helix-bundle channels probed via total chemical synthesis of alamethicin dimers: effects of a Gln7 to Asn7 mutation

Multi-oligomeric states of alamethicin ion channel: Assemblies and conductance

Transmembrane assemblies of the peptaibol alamethicin (ALM) are among the most extensively studied ion channels not only because of their antimicrobial activity but also as models for channel structure and aggregation. In this study, several oligomeric states of ALM are investigated with molecular dynamics simulations to establish properties of the channel and obtain free energy profiles for ion transport and the corresponding values of conductance. The hexamer, heptamer, and octamer of ALM in phospholipid membrane are found to be stable but highly dynamic in barrel-stave structures, with calculated conductance equal to 18, 195, and 1270 pS, respectively, in 1 M KCl ion solution. The corresponding free energy profiles, reported for the first time, are reconstructed from simulations at applied voltage of 200 mV with the aid of the electrodiffusion model both with and without the knowledge of diffusivity. The calculated free energy barriers are equal to 2.5, 1.5, and 0.5 kcal/mol for K+ and 4.0, 2.2, and 1.5 kcal/mol for Cl-, for hexamer, heptamer, and octamer, respectively. The calculated conductance and the ratio between conductance in consecutive states are in good agreement with those measured experimentally. This suggests that the hexamer is the lowest conducting state, with measured conductance equal to 19 pS. The selectivity of K+ over Cl- is calculated as 1.5 and 2.3 for the octameric and heptameric channels, close to the selectivity measured for high-conductance states. Selectivity increases to 13 in the hexameric channel in which the narrowest Gln7 site has a pore radius of only ∼1.6 Å, again in accord with experiment. A good agreement found between calculated and measured conductance through a hexamer templated on cyclodextrin lands additional support for the results of our simulations, and the comparison with ALM reveals the dependence of conductance on the nature of phospholipid membrane.

Gain-of-function analogues of the pore-forming peptide melittin selected by orthogonal high-throughput screening

We recently developed an orthogonal, high-throughput assay to identify peptides that self-assemble into potent, equilibrium pores in synthetic lipid bilayers. Here, we use this assay as a high-throughput screen to select highly potent pore-forming peptides from a 7776-member rational combinatorial peptide library based on the sequence of the natural pore-forming peptide toxin melittin. In the library we varied ten critical residues in the melittin sequence, chosen to test specific structural hypotheses about the mechanism of pore formation. Using the new high-throughput assay, we screened the library for gain-of-function sequences at a peptide to lipid ratio of 1:1000 where native melittin is not active. More than 99% of the library sequences were also inactive under these conditions. A small number of library members (0.1%) were highly active. From these we identified 14 potent, gain-of-function, pore-forming sequences. These sequences differed from melittin in only 2-6 amino acids out of 26. Some native residues were highly conserved and others were consistently changed. The two factors that were essential for gain-of-function were the preservation of melittin's proline-dependent break in the middle of the helix and the improvement and extension the amphipathic nature of the α-helix. In particular the highly cationic carboxyl-terminal sequence of melittin, is consistently changed in the gain-of-function variants to a sequence that it is capable of participating in an extended amphipathic α-helix. The most potent variants reside in a membrane-spanning orientation, in contrast to the parent melittin, which is predominantly surface bound. This structural information, taken together with the high-throughput tools developed for this work, enable the identification, refinement and optimization of pore-forming peptides for many potential applications.

Cyclodextrin-scaffolded alamethicin with remarkably efficient membrane permeabilizing properties and membrane current conductance

Bacterial resistance to classical antibiotics is a serious medical problem, which continues to grow. Small antimicrobial peptides represent a potential solution and are increasingly being developed as novel therapeutic agents. Many of these peptides owe their antibacterial activity to the formation of trans-membrane ion-channels resulting in cell lysis. However, to further develop the field of peptide antibiotics, a thorough understanding of their mechanism of action is needed. Alamethicin belongs to a class of peptides called peptaibols and represents one of these antimicrobial peptides. To examine the dynamics of assembly and to facilitate a thorough structural evaluation of the alamethicin ion-channels, we have applied click chemistry for the synthesis of templated alamethicin multimers covalently attached to cyclodextrin-scaffolds. Using oriented circular dichroism, calcein release assays, and single-channel current measurements, the α-helices of the templated multimers were demonstrated to insert into lipid bilayers forming highly efficient and remarkably stable ion-channels.

Using ion channel-forming peptides to quantify protein-ligand interactions

This paper proposes a method for sensing affinity interactions by triggering disruption of self-assembly of ion channel-forming peptides in planar lipid bilayers. It shows that the binding of a derivative of alamethicin carrying a covalently attached sulfonamide ligand to carbonic anhydrase II (CA II) resulted in the inhibition of ion channel conductance through the bilayer. We propose that the binding of the bulky CA II protein (MW approximately 30 kD) to the ion channel-forming peptides (MW approximately 2.5 kD) either reduced the tendency of these peptides to self-assemble into a pore or extracted them from the bilayer altogether. In both outcomes, the interactions between the protein and the ligand lead to a disruption of self-assembled pores. Addition of a competitive inhibitor, 4-carboxybenzenesulfonamide, to the solution released CA II from the alamethicin-sulfonamide conjugate and restored the current flow across the bilayer by allowing reassembly of the ion channels in the bilayer. Time-averaged recordings of the current over discrete time intervals made it possible to quantify this monovalent ligand binding interaction. This method gave a dissociation constant of approximately 2 microM for the binding of CA II to alamethicin-sulfonamide in the bilayer recording chamber: this value is consistent with a value obtained independently with CA II and a related sulfonamide derivative by isothermal titration calorimetry.

Ligand-induced extramembrane conformation switch controlling alamethicin assembly and the channel current

In this review, we describe our approach to creating artificial receptor-channel proteins or sensor systems, using an extramembrane segment conformationally switchable by external stimuli. Alamethicin is known to self-assemble in membranes to form ion channels with various open states. Employment of an alpha-helical leucine-zipper segment resulted in the effective modulation of the association states of alamethicin to produce a single predominant channel-open state. A decrease in the helical content of the extramembrane segments was found to induce a channel-current increase. Therefore, conformational changes in the extramembrane segments induced by the interaction with ligands can be reflected in the current levels.

Total syntheses in solution of TOAC-labelled alamethicin F50/5 analogues

Total syntheses in solution of a set of four selected analogues of the 19-mer component F50/5 of alamethicin, the most extensively studied among the channel-former peptaibol antibiotics, are planned and reported. All analogues bear three Glu(OMe) residues, replacing the Gln residues at positions 7, 18, and 19 of the naturally occurring compound. Three analogues are mono-labelled with the free-radical-containing amino acid residue TOAC at the strategic positions 1, 8, or 16. The fourth analogue is bis-labelled with the same EPR-active residue at both positions 1 and 16. In the native sequence, all of the positions where TOAC replacements have been introduced are characterized by residues of Aib, the prototype of the class of helicogenic C(alpha)-tetrasubstituted alpha-amino acids. All of the TOAC analogues synthesized exhibit significant membrane-modifying properties.

Channel-Forming Activity of Alamethicin: Effects of Covalent Tethering

In this short review article, the effects of covalent tethering of alamethicin molecules on channel-forming behavior are described. Broadly speaking, these chemical modifications have provided insight into all three aspects of channel behavior: the structure of the conducting state, the ion-selectivity and ion-permeation properties, and the voltage dependence. Each of these aspects are discussed in turn.

Ion channels of N-terminally linked alamethicin dimers: enhancement of cation-selectivity by substitution of Glu for Gln at position 7

Alamethicin forms voltage-gated ion channels that have moderate cation-selectivity. The enhancement of the cation-selectivity by introducing negatively charged residues at positions 7 and 18 has been studied using the tethered homodimers of alamethicin with Q7 and E18 (di-alm-Q7E18) and its analog with E7 and Q18 (di-alm-E7Q18). In the dimeric peptides, monomer peptides are linked at the N-termini by a disulfide bond. Both the peptides formed long lasting ion channels at cis-positive voltages when added to the cis-side membrane. Their long open duration enabled us to obtain current-voltage (I-V(m)) relations and reversal potentials at the single-channel level by applying a voltage ramp during the channel opening. The reversal potentials measured in asymmetric KCl solutions indicated that ionized E7 provided strong cation-selectivity, whereas ionized E18 little influenced the charge selectivity. This was also the case for the macroscopic charge selectivity determined from the reversal potentials obtained by the macroscopic I-V(m) measurements. The results are accounted for by stronger electrostatic interactions between permeant ions and negatively charged residues at the narrowest part of the pore than at the pore mouth.

Total synthesis in solution of alamethicin F50/5 by an easily tunable segment condensation approach

A total synthesis in solution of the 19-mer peptide component F50/5 of alamethicin, the most extensively investigated among the channel-former peptaibol antibiotics, is reported. Three peptide segments (A, B, C) were prepared and assembled, followed by incorporation of the acetylated N-terminal amino acid. The synthetic modules B and C are characterized by three Glu(OMe) residues (at positions 7, 18, and 19) that, after completion of the synthesis, were reacted with ammonia to provide alamethicin F50/5. By use of this general strategy, we also prepared the [Gln7, Glu(OMe)18,19] alamethicin F50/5 analogue. The purity and conformation of the final products were assessed by chromatographic, spectrometric, and spectroscopic techniques. This tunable segment condensation approach will pave the way for an easy synthesis of alamethicin analogues bearing amino acid residues with desired side-chain probes even at the N-terminus and in internal positions of the sequence.

Engineering charge selectivity in model ion channels

Most ion channel proteins exhibit some degree of charge selectivity, that is, an ability to conduct ions of one charge more efficiently than ions of the opposite charge. The structural origins of charge selectivity remain incompletely understood despite recent advances in the determination of cation-selective and anion-selective channel protein structures. Helix bundle channels formed via self-assembly of the peptide alamethicin provide a tractable model system for exploring the structural basis of charge selectivity. We synthesized covalently-linked alamethicin dimers, with amino acid substitutions at position 18 [lysine (Lys), arginine (Arg), glutamine (Gln), 2,3-diaminopropionic acid (Dpr)] in each helix, to assess the role of this position as a charge-selectivity determinant in alamethicin channels. Of the position 18 substitutions investigated, the Lys derivative exhibited the greatest degree of anion selectivity. Arg-containing channels were slightly less anion-selective than Lys. Interestingly, Dpr channels showed cation selectivity nearly equivalent to that exhibited by the neutral Gln derivative. We suggest that this result is due to a wider pore diameter that permits a greater number of counter-ions leading to enhanced charge screening and a lower effective side-chain positive charge.

Ion channels of alamethicin dimer N-terminally linked by disulfide bond

A covalent dimer of alamethicin Rf30 was synthesized by linking the N-termini by a disulfide bond. When the dimer peptides were added to the cis-side of a diphytanoyl PC membrane, macroscopic channel current was induced only at cis positive voltages. The single-channel recordings showed several conductance levels that were alternately stabilized. These results indicate that the dimer peptides form stable channels by N-terminal insertion like alamethicin and that most of the pores are assembled from even numbers of helices. Taking advantages of the long open duration of the dimer peptide channels, the current-voltage (I-V) relations of the single-channels were obtained by applying fast voltage ramps during the open states. The I-V relations showed rectification, such that current from the cis-side toward the trans-side is larger than that in the opposite direction. The intrinsic rectification is mainly attributed to the macro dipoles of parallel peptide helices surrounding a central pore.

Conformation of alamethicin in oriented phospholipid bilayers determined by (15)N solid-state nuclear magnetic resonance

The conformation of the 20-residue antibiotic ionophore alamethicin in macroscopically oriented phospholipid bilayers has been studied using (15)N solid-state nuclear magnetic resonance (NMR) spectroscopy in combination with molecular modeling and molecular dynamics simulations. Differently (15)N-labeled variants of alamethicin and an analog with three of the alpha-amino-isobutyric acid residues replaced by alanines have been investigated to establish experimental structural constraints and determine the orientation of alamethicin in hydrated phospholipid (dimyristoylphosphatidylcholine) bilayers and to investigate the potential for a major kink in the region of the central Pro(14) residue. From the anisotropic (15)N chemical shifts and (1)H-(15)N dipolar couplings determined for alamethicin with (15)N-labeling on the Ala(6), Val(9), and Val(15) residues and incorporated into phospholipid bilayer with a peptide:lipid molar ratio of 1:8, we deduce that alamethicin has a largely linear alpha-helical structure spanning the membrane with the molecular axis tilted by 10-20 degrees relative to the bilayer normal. In particular, we find compatibility with a straight alpha-helix tilted by 17 degrees and a slightly kinked molecular dynamics structure tilted by 11 degrees relative to the bilayer normal. In contrast, the structural constraints derived by solid-state NMR appear not to be compatible with any of several model structures crossing the membrane with vanishing tilt angle or the earlier reported x-ray diffraction structure (Fox and Richards, Nature. 300:325-330, 1982). The solid-state NMR-compatible structures may support the formation of a left-handed and parallel multimeric ion channel.

Effects of peptide dimerization on pore formation: Antiparallel disulfide-dimerized magainin 2 analogue

To elucidate the effects of peptide dimerization on pore formation by magainin 2 (MG2), a covalently linked antiparallel dimer of the MG2 analogue [(F5Y, L6C, F16W, I20C-MG2)(2): II] was synthesized based on the dimer structure revealed by our NMR study. The interactions of the dimer with lipid bilayers were investigated by CD and fluorescence in comparison with a monomer analogue (F5Y, F16W-MG2: I). Similar to I, II was found to form a peptide-lipid supramolecular complex pore accompanied with lipid flip-flop and peptide translocation. The pore formed by II was characterized by a slightly larger pore diameter and a threefold longer lifetime than that of I, although the pore formation rate of the dimer was lower than that of the monomer. The coexistence of the dimer and the monomer exhibited slight but significant synergism in membrane permeabilization, which was maximal at a monomer/dimer ratio of 3. Therefore, we concluded that a pentameric pore composed of one pore-stabilizing dimer and three monomers maximized the overall leakage activity in keeping with our kinetic prediction.

Protonation of lysine residues inverts cation/anion selectivity in a model channel

A dimeric alamethicin analog with lysine at position 18 in the sequence (alm-K18) was previously shown to form stable anion-selective channels in membranes at pH 7.0 [Starostin, A. V., R. Butan, V. Borisenko, D. A. James, H. Wenschuh, M. S. Sansom, and G. A. Woolley. 1999. Biochemistry. 38:6144-6150]. To probe the charge state of the conducting channel and how this might influence cation versus anion selectivity, we performed a series of single-channel selectivity measurements at different pH values. At pH 7.0 and below, only anion-selective channels were found with P(K(+))/P(Cl(-)) = 0. 25. From pH 8-10, a mixture of anion-selective, non-selective, and cation-selective channels was found. At pH > 11 only cation-selective channels were found with P(K(+))/P(Cl(-)) = 4. In contrast, native alamethicin-Q18 channels (with Gln in place of Lys at position 18) were cation-selective (P(K(+))/P(Cl(-)) = 4) at all pH values. Continuum electrostatics calculations were then carried out using an octameric model of the alm-K18 channel embedded in a low dielectric slab to simulate a membrane. Although the calculations can account for the apparent pK(a) of the channel, they fail to correctly predict the degree of selectivity. Although a switch from cation- to anion-selectivity as the channel becomes protonated is indicated, the degree of anion-selectivity is severely overestimated, suggesting that the continuum approach does not adequately represent some aspect of the electrostatics of permeation in these channels. Side-chain conformational changes upon protonation, conformational changes, and deprotonation caused by permeating cations and counterion binding by lysine residues upon protonation are considered as possible sources of the overestimation.