NMR conformational study of the sixth transmembrane segment of sarcoplasmic reticulum Ca2+-ATPase

Deciphering the Mechanism of Inhibition of SERCA1a by Sarcolipin Using Molecular Simulations

SERCA1a is an ATPase calcium pump that transports Ca²⁺ from the cytoplasm to the sarco/endoplasmic reticulum lumen. Sarcolipin (SLN), a transmembrane peptide, regulates the activity of SERCA1a by decreasing its Ca²⁺ transport rate, but its mechanism of action is still not well-understood. To decipher this mechanism, we have performed normal mode analysis in the all-atom model, with the SERCA1a-SLN complex, or the isolated SERCA1a, embedded in an explicit membrane. The comparison of the results allowed us to provide an explanation at the atomic level for the action of SLN that is in good agreement with experimental observations. In our analyses, the presence of SLN locally perturbs the TM6 transmembrane helix and as a consequence modifies the position of D800, one of the key metal-chelating residues. Additionally, it reduces the flexibility of the gating residues, V304, and E309 in TM4, at the entrance of the Ca²⁺ binding sites, which would decrease the affinity for Ca²⁺. Unexpectedly, SLN has also an effect on the ATP binding site more than 35 Å away, due to the straightening of TM5, a long helix considered as the spine of the protein. The straightening of TM5 modifies the structure of the P-N linker that sits above it, and which comprises the ³⁵¹DKTG³⁵⁴ conserved motif, resulting in an increase of the distance between ATP and the phosphorylation site. As a consequence, the turn-over rate could be affected. All this gives SERCA1a the propensity to go toward a Ca²⁺ low-affinity E2-like state in the presence of SLN and toward a Ca²⁺ high-affinity E1-like state in the absence of SLN. In addition to a general mechanism of inhibition of SERCA1a regulatory peptides, this study also provides an insight into the conformational transition between the E2 and E1 states.

Structure and dynamic properties of membrane proteins using NMR

Integral membrane proteins are one of the most challenging groups of macromolecules despite their apparent conformational simplicity. They manage and drive transport, circulate information, and participate in cellular movements via interactions with other proteins and through intricate conformational changes. Their structural and functional decoding is challenging and has imposed demanding experimental development. Solution nuclear magnetic resonance (NMR) spectroscopy is one of the techniques providing the capacity to make a significant difference in the deciphering of the membrane protein structure-function paradigm. The method has evolved dramatically during the last decade resulting in a plethora of new experiments leading to a significant increase in the scientific repertoire for studying membrane proteins. Besides solving the three-dimensional structures using state-of-the-art approaches, a large variety of developments of well-established techniques are available providing insight into membrane protein flexibility, dynamics, and interactions. Inspired by the speed of development in the application of new strategies, by invention of methods to measure solvent accessibility and describe low-populated states, this review seeks to introduce the vast possibilities solution NMR can offer to the study of membrane protein structure-function analyses with special focus on applicability.

Large scale expression and purification of mouse melanopsin-L in the baculovirus expression system

Melanopsin is the mammalian photopigment that primarily mediates non-visual photoregulated physiology. So far, this photopigment is poorly characterized with respect to structure and function. Here, we report large-scale production and purification of the intact long isoform of mouse melanopsin (melanopsin-L) using the baculovirus/insect cell expression system. Exploiting the baculoviral GP67 signal peptide, we obtained expression levels that varied between 10-30pmol/10(6)cells, equivalent to 2-5mg/L. This could be further enhanced using DMSO as a chemical chaperone. LC-MS analysis confirmed that full-length melanopsin-L was expressed and demonstrated that the majority of the expressed protein was N-glycosylated at Asn(30) and Asn(34). Other posttranslational modifications were not yet detected. Purification was achieved exploiting a C-terminal deca-histag, realizing a purification factor of several hundred-fold. The final recovery of purified melanopsin-L averaged 2.5% of the starting material. This was mainly due to low extraction yields, probably since most of the protein was present as the apoprotein. The spectral data we obtained agree with an absorbance maximum in the 460-500nm wavelength region and a significant red-shift upon illumination. This is the first report on expression and purification of full length melanopsin-L at a scale that can easily be further amplified.

The sarcoplasmic Ca2+-ATPase: design of a perfect chemi-osmotic pump

The sarcoplasmic (SERCA 1a) Ca2+-ATPase is a membrane protein abundantly present in skeletal muscles where it functions as an indispensable component of the excitation-contraction coupling, being at the expense of ATP hydrolysis involved in Ca2+/H+ exchange with a high thermodynamic efficiency across the sarcoplasmic reticulum membrane. The transporter serves as a prototype of a whole family of cation transporters, the P-type ATPases, which in addition to Ca2+ transporting proteins count Na+, K+-ATPase and H+, K+-, proton- and heavy metal transporting ATPases as prominent members. The ability in recent years to produce and analyze at atomic (2·3-3 Å) resolution 3D-crystals of Ca2+-transport intermediates of SERCA 1a has meant a breakthrough in our understanding of the structural aspects of the transport mechanism. We describe here the detailed construction of the ATPase in terms of one membraneous and three cytosolic domains held together by a central core that mediates coupling between Ca2+-transport and ATP hydrolysis. During turnover, the pump is present in two different conformational states, E1 and E2, with a preference for the binding of Ca2+ and H+, respectively. We discuss how phosphorylated and non-phosphorylated forms of these conformational states with cytosolic, occluded or luminally exposed cation-binding sites are able to convert the chemical energy derived from ATP hydrolysis into an electrochemical gradient of Ca2+ across the sarcoplasmic reticulum membrane. In conjunction with these basic reactions which serve as a structural framework for the transport function of other P-type ATPases as well, we also review the role of the lipid phase and the regulatory and thermodynamic aspects of the transport mechanism.

Functional reconstitution of the human serotonin receptor 5-HT(6) using synthetic transmembrane peptides

Seven transmembrane (7TM) synthetic peptides mimicking the alpha-helical TM domains of the human serotonin receptor subtype-6 (5-HT(6)) were autonomously reconstituted in detergent micelle and liposome environments. The degree of assembly of the 7TM peptides was characterized by monitoring the fluorescence resonance energy transfer (FRET) between donor and acceptor probes labeled at the amino termini of the second and fourth TM-peptides, respectively. The FRET efficiency of these peptides significantly increased when the 7TM peptides were reconstituted in liposome compare to detergent micelles. Furthermore, the 7TM peptides reconstituted in liposomes selectively bound to free serotonin and serotonin-conjugated magnetic beads, yielding a dissociation constant of 0.84 microM. These results show that the seven individual TM domains of 5-HT(6) can spontaneously assemble into liposomes in a conformation that mimics a native structure, and further demonstrate that specific interactions between TM helices play a critical role in the folding and stabilizing of GPCRs. The autonomous assembly of 7TM-peptides can be applied to the screening of agonists for GPCRs that are difficult to manipulate.

Crystal structure of D351A and P312A mutant forms of the mammalian sarcoplasmic reticulum Ca(2+) -ATPase reveals key events in phosphorylation and Ca(2+) release

In recent years crystal structures of the sarcoplasmic reticulum Ca(2+)-ATPase (SERCA1a), stabilized in various conformations with nucleotide and phosphate analogs, have been obtained. However, structural analysis of mutant forms would also be valuable to address key mechanistic aspects. We have worked out a procedure for affinity purification of SERCA1a heterologously expressed in yeast cells, producing sufficient amounts for crystallization and biophysical studies. We present here the crystal structures of two mutant forms, D351A and P312A, to address the issue whether the profound functional changes seen for these mutants are caused by major structural changes. We find that the structure of P312A with ADP and AlF(4)(-) bound (3.5-A resolution) and D351A with AMPPCP or ATP bound (3.4- and 3.7-A resolution, respectively) deviate only slightly from the complexes formed with that of wild-type ATPase. ATP affinity of the D351A mutant was very high, whereas the affinity for cytosolic Ca(2+) was similar to that of the wild type. We conclude from an analysis of data that the extraordinary affinity of the D351A mutant for ATP is caused by the electrostatic effects of charge removal and not by a conformational change. P312A exhibits a profound slowing of the Ca(2+)-translocating Ca(2)E1P-->E2P transition, which seems to be due to a stabilization of Ca(2)E1P rather than a destabilization of E2P. This can be accounted for by the strain that the Pro residue induces in the straight M4 helix of the wild type, which is removed upon the replacement of Pro(312) with alanine in P312A.

Structure and localization of an essential transmembrane segment of the proton translocation channel of yeast H+-V-ATPase

Vacuolar (H+)-ATPase (V-ATPase) is a proton pump present in several compartments of eukaryotic cells to regulate physiological processes. From biochemical studies it is known that the interaction between arginine 735 present in the seventh transmembrane (TM7) segment from subunit a and specific glutamic acid residues in the subunit c assembly plays an essential role in proton translocation. To provide more detailed structural information about this protein domain, a peptide resembling TM7 (denoted peptide MTM7) from Saccharomyces cerevisiae (yeast) V-ATPase was synthesized and dissolved in two membrane-mimicking solvents: DMSO and SDS. For the first time the secondary structure of the putative TM7 segment from subunit a is obtained by the combined use of CD and NMR spectroscopy. SDS micelles reveal an alpha-helical conformation for peptide MTM7 and in DMSO three alpha-helical regions are identified by 2D 1H-NMR. Based on these conformational findings a new structural model is proposed for the putative TM7 in its natural environment. It is composed of 32 amino acid residues that span the membrane in an alpha-helical conformation. It starts at the cytoplasmic side at residue T719 and ends at the luminal side at residue W751. Both the luminal and cytoplasmatic regions of TM7 are stabilized by the neighboring hydrophobic transmembrane segments of subunit a and the subunit c assembly from V-ATPase.

The predicted transmembrane fragment 17 of the human multidrug resistance protein 1 (MRP1) behaves as an interfacial helix in membrane mimics

The human multidrug resistance protein MRP1 (or ABCC1) is one of the most important members of the large ABC transporter family, in terms of both its biological (tissue defense) and pharmacological functions. Many studies have investigated the function of MRP1, but structural data remain scarce for this protein. We investigated the structure and dynamics of predicted transmembrane fragment 17 (TM17, from Ala(1227) to Ser(1251)), which contains a single Trp residue (W(1246)) involved in MRP1 substrate specificity and transport function. We synthesized TM17 and a modified peptide in which Ala(1227) was replaced by a charged Lys residue. Both peptides were readily solubilized in dodecylmaltoside (DM) or dodecylphosphocholine (DPC) micelles, as membrane mimics. The interaction of these peptides with DM or DPC micelles was studied by steady-state and time-resolved Trp fluorescence spectroscopy, including experiments in which Trp was quenched by acrylamide or by two brominated analogs of DM. The secondary structure of these peptides was determined by circular dichroism. Overall, the results obtained indicated significant structuring ( approximately 50% alpha-helix) of TM17 in the presence of either DM or DPC micelles as compared to buffer. A main interfacial location of TM17 is proposed, based on significant accessibility of Trp(1246) to brominated alkyl chains of DM and/or acrylamide. The comparison of various fluorescence parameters including lambda(max), lifetime distributions and Trp rotational mobility with those determined for model fluorescent transmembrane helices in the same detergents is also consistent with the interfacial location of TM17. We therefore suggest that TM17 intrinsic properties may be insufficient for its transmembrane insertion as proposed by the MRP1 consensus topological model. This insertion may also be controlled by additional constraints such as interactions with other TM domains and its position in the protein sequence. The particular pattern of behavior of this predicted transmembrane peptide may be the hallmark of a fragment involved in substrate transport.

NMR studies of the fifth transmembrane segment of Na+,K+-ATPase reveals a non-helical ion-binding region

The structure of a synthetic peptide corresponding to the fifth membrane-spanning segment (M5) in Na(+),K(+)-ATPase in sodium dodecyl sulfate (SDS) micelles was determined using liquid-state nuclear magnetic resonance (NMR) spectroscopy. The spectra reveal that this peptide is substantially less alpha-helical than the corresponding M5 peptide of Ca(2+)-ATPase. A well-defined alpha-helix is shown in the C-terminal half of the peptide. Apart from a short helical stretch at the N-terminus, the N-terminal half contains a non-helical region with two proline residues and sequence similarity to a non-structured transmembrane element of the Ca(2+)-ATPase. Furthermore, this region spans the residues implicated in Na(+) and K(+) transport, where they are likely to offer the flexibility needed to coordinate Na(+) as well as K(+) during active transport.

NMR studies of the fifth transmembrane segment of sarcoplasmic reticulum Ca2+-ATPase reveals a hinge close to the Ca2+-ligating residues

Two recent X-ray structures have tremendously increased the understanding of the sarco/endoplasmic reticulum Ca(2+)-ATPase (SERCA) and related proteins. Both structures show the fifth transmembrane span (M5) as a single continuous alpha-helix. The inherent structural and dynamic features of this span (Lys758-Glu785) were studied in isolation in sodium dodecyl sulfate (SDS) micelles using liquid-state nuclear magnetic resonance (NMR) spectroscopy. We find that a flexible region (Ile765-Asn768) is interrupting the alpha-helix. The location of the flexible region near the Ca(2+) binding residues Asn768 and Glu771 suggests that together with a similar region in M6 it has a hinge function that may be important for cooperative Ca(2+) binding and occlusion.

Calcium binding to the transmembrane domain of the sarcoplasmic reticulum Ca2+-ATPase: insights from molecular modeling

Sarcoplasmic reticulum Ca(2+)- ATPase pumps Ca(2+) ions from muscle cells to the sarcoplasmic reticulum. Here we use molecular dynamics and electrostatic modeling to investigate structural and dynamical features of key intermediates in the Ca(2+) binding process of the protein. Structural models of the protein (containing either two, one, or no calcium ions in the transmembrane domain) are constructed based on the X-ray structure by Toyoshima et al. (Nature 2000;405:647-655). The protein is embedded in a water/octane bilayer, which mimics the water/membrane environment. Our calculations provide information on the hydration of the two Ca(2+) ions, not emerging from the X-ray structure. Furthermore, they indicate that uptake of the metal ions causes large structural rearrangements of the metal binding sites. In addition, they suggest that the two ions reach their binding sites via two specific pathways. Finally, they allow identification of residues in the outer mouth of the protein that might interact with the Ca(2+) ions during the binding process.

Involvement of the cytoplasmic loop L6-7 in the entry mechanism for transport of Ca2+ through the sarcoplasmic reticulum Ca2+-ATPase

We previously found that mutants of conserved aspartate residues of sarcoplasmic reticulum Ca(2+)-ATPase in the cytosolic loop, connecting transmembrane segments M6 and M7 (L6-7 loop), exhibit a strongly reduced sensitivity toward Ca(2+) activation of the transport process. In this study, yeast membranes, expressing wild type and mutant Ca(2+)-ATPases, were reacted with Cr small middle dotATP and tested for their ability to occlude (45)Ca(2+) by HPLC analysis, after cation resin and C(12)E(8) treatment. We found that the D813A/D818A mutant that displays markedly low calcium affinity was capable of occluding Ca(2+) to the same extent as wild type ATPase. Using NMR and mass spectrometry we have analyzed the conformational properties of the synthetic L6-7 loop and demonstrated the formation of specific 1:1 cation complexes of the peptide with calcium and lanthanum. All three aspartate Asp(813)/Asp(815)/Asp(818) were required to coordinate the trivalent lanthanide ion. Overall these observations suggest a dual function of the loop: in addition to mediating contact between the intramembranous Ca(2+)-binding sites and the cytosolic phosphorylation site (Zhang, Z., Lewis, D., Sumbilla, C., Inesi G., and Toyoshima, C. (2001) J. Biol. Chem. 276, 15232-15239), the L6-7 loop, in a preceding step, participates in the formation of an entrance port, before subsequent high affinity binding of Ca(2+) inside the membrane.

Structure and topology of a peptide segment of the 6th transmembrane domain of the Saccharomyces cerevisae alpha-factor receptor in phospholipid bilayers

A detailed analysis of the structure of an 18-residue peptide AQSLLVPSIIFILAYSLK [M6(252-269, C252A)] in 1,2-dimyristoyl-sn-glycero-phosphocholine bilayers was carried out using solid state NMR and attenuated total reflection Fourier transform infrared spectroscopy. The peptide corresponds to a portion of the 6th transmembrane domain of the alpha-factor receptor of Saccharomyces cerevisiae. Ten homologs of M6(252-269, C252A) were synthesized in which individual residues were labeled with (15)N. One- and two-dimensional solid state NMR experiments were used to determine the chemical shifts and (1)H-(15)N dipolar coupling constants for the (15)N-labeled peptides in oriented dimyristoylphosphatidylcholine bilayers on stacked glass plates. These parameters were used to calculate the structure and orientation of M6(252-269, C252A) in the bilayers. The results indicate that the carboxyl terminal residues (9-14) are alpha-helical and oriented with an angle of about 8 degrees with respect to the bilayer normal. Independently, an attenuated total reflection Fourier transform infrared spectroscopy analysis on M6(252-269, C252A) in a 1,2-dimyristoyl-sn-glycero-phosphocholine bilayer concluded that the helix tilt angle was about 12.5 degrees. The results on the structure of M6(252-269, C252A) in bilayers are in good agreement with the structure determined in trifluoroethanol/water solutions (B. Arshava et al. Biopolymers, 1998, Vol. 46, pp. 343-357). The present study shows that solid state NMR spectroscopy can provide high resolution information on the structure of transmembrane domains of a G protein-coupled receptor.

Requirement of specific intrahelical interactions for stabilizing the inactive conformation of glycoprotein hormone receptors

Systematic analysis of structural changes induced by activating mutations has been frequently utilized to study activation mechanisms of G-protein-coupled receptors (GPCRs). In the thyrotropin receptor and the lutropin receptor (LHR), a large number of naturally occurring mutations leading to constitutive receptor activation were identified. Saturating mutagenesis studies of a highly conserved Asp in the junction of the third intracellular loop and transmembrane domain 6 suggested a participation of this anionic residue in a salt bridge stabilizing the inactive receptor conformation. However, substitution of all conserved cationic residues at the cytoplasmic receptor surface did not support this hypothesis. Asp/Glu residues are a common motif at the N-terminal ends of alpha-helices terminating and stabilizing the helical structure (helix capping). Since Asp/Glu residues in the third intracellular loop/transmembrane domain 6 junction are not only preserved in glycoprotein hormone receptors but also in other GPCRs we speculated that this residue probably participates in an N-terminal helix-capping structure. Poly-Ala stretches are known to form and stabilize alpha-helices. Herein, we show that the function of the highly conserved Asp can be mimicked by poly-Ala substitutions in the LHR and thyrotropin receptor. CD and NMR studies of peptides derived from the juxtamembrane portion of the LHR confirmed the helix extension by the poly-Ala substitution and provided further evidence for an involvement of Asp in a helix-capping structure. Our data implicate that in addition to well established interhelical interactions the inactive conformation of GPCRs is also stabilized by specific intrahelical structures.

Interaction of membrane proteins and lipids with solubilizing detergents

Detergents are indispensable in the isolation of integral membrane proteins from biological membranes to study their intrinsic structural and functional properties. Solubilization involves a number of intermediary states that can be studied by a variety of physicochemical and kinetic methods; it usually starts by destabilization of the lipid component of the membranes, a process that is accompanied by a transition of detergent binding by the membrane from a noncooperative to a cooperative interaction already below the critical micellar concentration (CMC). This leads to the formation of membrane fragments of proteins and lipids with detergent-shielded edges. In the final stage of solubilization membrane proteins are present as protomers, with the membrane inserted sectors covered by detergent. We consider in detail the nature of this interaction and conclude that in general binding as a monolayer ring, rather than as a micelle, is the most probable mechanism. This mode of interaction is supported by neutron diffraction investigations on the disposition of detergent in 3-D crystals of membrane proteins. Finally, we briefly discuss the use of techniques such as analytical ultracentrifugation, size exclusion chromatography, and mass spectrometry relevant for the structural investigation of detergent solubilized membrane proteins.

The transmembrane domains of hepatitis C virus envelope glycoproteins E1 and E2 play a major role in heterodimerization

Oligomerization of viral envelope proteins is essential to control virus assembly and fusion. The transmembrane domains (TMDs) of hepatitis C virus envelope glycoproteins E1 and E2 have been shown to play multiple functions during the biogenesis of E1E2 heterodimer. This makes them very unique among known transmembrane sequences. In this report, we used alanine scanning insertion mutagenesis in the TMDs of E1 and E2 to examine their role in the assembly of E1E2 heterodimer. Alanine insertion within the center of the TMDs of E1 or E2 or in the N-terminal part of the TMD of E1 dramatically reduced heterodimerization, demonstrating the essential role played by these domains in the assembly of hepatitis C virus envelope glycoproteins. To better understand the alanine scanning data obtained for the TMD of E1 which contains GXXXG motifs, we analyzed by circular dichroism and nuclear magnetic resonance the three-dimensional structure of the E1-(350-370) peptide encompassing the N-terminal sequence of the TMD of E1 involved in heterodimerization. Alanine scanning results and the three-dimensional molecular model we obtained provide the first framework for a molecular level understanding of the mechanism of hepatitis C virus envelope glycoprotein heterodimerization.

Sarco(endo)plasmic reticulum calcium pumps: recent advances in our understanding of structure/function and biology (review)

This review examines the structure and function of the sarco(endo)plasmic reticulum calcium pump (SERCA1a) in the light of the recent publication of the 2.6 A resolution structure of this protein, and looks at the increasing awareness of the key role played by SERCAs in calcium signalling. The roles played by the calcium pump isoforms, SERCA1a/b, SERCA2a/b and SERCA3a/b/c in cellular function are discussed, and the modulation of SERCA activity by phospholamban, sarcolipin and other modulatory influences is examined. The recent discoveries of human SERCA mutations leading to disease states is reviewed, and the insights into SERCA function using transgenic approaches are outlined.

Crystal structure of the calcium pump of sarcoplasmic reticulum at 2.6 A resolution

Calcium ATPase is a member of the P-type ATPases that transport ions across the membrane against a concentration gradient. Here we have solved the crystal structure of the calcium ATPase of skeletal muscle sarcoplasmic reticulum (SERCA1a) at 2.6 A resolution with two calcium ions bound in the transmembrane domain, which comprises ten alpha-helices. The two calcium ions are located side by side and are surrounded by four transmembrane helices, two of which are unwound for efficient coordination geometry. The cytoplasmic region consists of three well separated domains, with the phosphorylation site in the central catalytic domain and the adenosine-binding site on another domain. The phosphorylation domain has the same fold as haloacid dehalogenase. Comparison with a low-resolution electron density map of the enzyme in the absence of calcium and with biochemical data suggests that large domain movements take place during active transport.

Physical interactions between phospholamban and sarco(endo)plasmic reticulum Ca2+-ATPases are dissociated by elevated Ca2+, but not by phospholamban phosphorylation, vanadate, or thapsigargin, and are enhanced by ATP

Previous co-immunoprecipitation studies (Asahi, M., Kimura, Y., Kurzydlowski, K., Tada, M., and MacLennan, D. H. (1999) J. Biol. Chem. 274, 32855-32862) revealed that physical interactions between phospholamban (PLN) and the fast-twitch skeletal muscle sarco(endo)plasmic reticulum Ca(2+) ATPase (SERCA1a) were retained, even with PLN monoclonal antibody 1D11 bound to an epitope lying between PLN residues 7 and 17. Because the 1D11 antibody relieves inhibitory interaction between the two proteins, it was of interest to determine whether PLN phosphorylation or elevation of Ca(2+), which also relieves inhibitory interactions between PLN and SERCA, would disrupt physical interactions. Co-immunoprecipitation was measured in the presence of increasing concentrations of Ca(2+) or after phosphorylation of PLN by protein kinase A. Physical interactions were dissociated by elevated Ca(2+) but not by PLN phosphorylation. The addition of ATP enhanced interactions between PLN and SERCA. The further addition of vanadate and thapsigargin, both of which stabilize the E(2) conformation, did not diminish binding of PLN to SERCA. These data suggest that physical interactions between PLN and SERCA are stable when SERCA is in the Ca(2+)-free E(2) conformation but not when it is in the E(1) conformation and that phosphorylation of PLN does not dissociate physical interactions between PLN and SERCA.

Transmembrane helix M6 in sarco(endo)plasmic reticulum Ca(2+)-ATPase forms a functional interaction site with phospholamban. Evidence for physical interactions at other sites

In an earlier study (Kimura, Y., Kurzydlowski, K., Tada, M., and MacLennan, D. H. (1997) J. Biol. Chem. 272, 15061-15064), mutation of amino acids on one face of the phospholamban (PLN) transmembrane helix led to loss of PLN inhibition of sarco(endo)plasmic reticulum Ca(2+)-ATPase (SERCA) molecules. This helical face was proposed to form a site of PLN interaction with a transmembrane helix in SERCA molecules. To determine whether predicted transmembrane helices M4, M5, M6, or M8 in SERCA1a interact with PLN, SERCA1a mutants were co-expressed with wild-type PLN and effects on Ca(2+) dependence of Ca(2+) transport were measured. Wild-type inhibitory interactions shifted apparent Ca(2+) affinity of SERCA1a by an average of -0.34 pCa units, but four of the seven mutations in M4 led to a more inhibitory shift in apparent Ca(2+) affinity, averaging -0.53 pCa units. Seven mutations in M5 led to an average shift of -0.32 pCa units and seven mutations in M8 led to an average shift of -0.30 pCa units. Among 11 mutations in M6, 1, Q791A, increased the inhibitory shift (-0.59 pCa units) and 5, V795A (-0.11), L802A (-0.07), L802V (-0.04), T805A (-0.11), and F809A (-0.12), reduced the inhibitory shift, consistent with the view that Val(795), Leu(802), Thr(805), and Phe(809), located on one face of a predicted M6 helix, form a site in SERCA1a for interaction with PLN. Those mutations in M4, M6, or M8 of SERCA1a that enhanced PLN inhibitory function did not enhance PLN physical association with SERCA1a, but mutants V795A and L802A in M6, which decreased PLN inhibitory function, decreased physical association, as measured by co-immunoprecipitation. In related studies, those PLN mutants that gained inhibitory function also increased levels of co-immunoprecipitation of wild-type SERCA1a and those that lost inhibitory function also reduced association, correlating functional interaction sites with physical interaction sites. Thus, both functional and physical data confirm that PLN interacts with M6 SERCA1a.